Res-QAQC welding engineer 2

Page 1 of 4

V.Vincent arockiaraj

19, Savarimuthu Street, Manaparai, Tamilnadu, India,PIN – 621307Contact No: +919751357857Email id: [email protected]

Career objective

Seeking a position to utilize my skills and abilities in the field of Quality control engineering thatoffers professional growth while being resourceful, innovative and flexible.

Key skills

• QA/QC- Welding Inspector• Weld map & NDT• WPS, PQR & WPQR

• Welding consumables

• Well aware of ISO & U stamp• PWHT

Professional experience

`Company name - M/s. Acoustics India Private Limited, Trichy-District, Tamilnadu - State.(IMS 5 accredited - ISO - 9001; 14001; 18001; 27001 & 50001; ASME ‘U’Certified, National Board ‘NB’& ‘R’ stamp, IBR & PESO approved)

Designation - QA/QC Welding Engineer

Experience - 5 years

Inspection of - Pressure vessels, Skid, heat exchangers, storage tanks, cryogenic tanks, noiseControl products & Structural works.

Education

• B.E-Mechanical Engineering at Mookambigai College of Engineering, Trichy- First Class with Distinction (Duration: 2007-2011)

Technical qualification

• CSWIP 3.1 Level 2 from TWI - Marks 87.6% (Certification No 97936 - valid upto 23.04.2020)

• ASNT NDT LEVEL 2 in - Liquid Penetrant Testing (PT)- Radiographic Testing (RT)- Magnetic Particle Testing (MT)- Ultrasonic testing (UT)- Visual Testing (VT)- Radiographic Film Interpretation (RTFI)

Page 1 of 4



Career objective


Key skills









Education





Page 1 of 4



Career objective


Key skills









Education





mailto:[email protected]



Page 2 of 4

Professional summary

Self-motivated QA/QC Welding Engineer who enjoys working in a variety ofenvironments and with a variety of materials. Adopt at Quality Assurance practices, clientrelations and non-destructive testing. Familiar with SMAW, GTAW, GMAW, FCAW &SAW process.

Roles & Responsibility

Documents

• Ensuring the requirements of Codes, Standards and Specifications are met.

• Preparation of Welding Procedure Specification and its Qualification Record

(WPS & PQR)

• Some specific material combination WPS in my career are P1 to P8, P1 to P4, P4 to

P4, P7 to P7, P7 to P4, P8 to P8, P8 to P4, P43 to P43, P5A to P5A etc…• Witnessing the preparation of test plates and destructive tests and verifying

compliance with appropriate standards and specifications.

• Welder Qualification according to the production and Code requirements.

• Maintaining Welder Continuity according to ASME Sec IX and re-qualifying

welders whenever required

• Preparation of Weld Map for pressure vessels and piping.

• Assistance and agreement with the preparation of Inspection and Test Plans (ITP’s)• Regular check-up for instruments calibration validity and maintaining its records.

• Raw materials to service provider approval through evaluating their quality system

and products quality.

• Evaluation and preparation of inspection reports for the employer/client.

Shop floor Control

• Pre weld inspection of fit-up and weld preparations are in accordance with

specifications.

• Surveillance during welding to verify compliance with specified procedures including

any preheat, inter-pass temperature control and post heat requirements.

• Display of Welding procedure in production shop for easy guidance to welders.

• Welders Classification according to their skills and ability and display.

• Train welders and conducting seminars to welders regarding quality requirements.

• Ensuring that use of qualified welders in production.

• Solve weld repairs by assisting welder and do analysis to avoid occurrence in

future.

Page 3 of 4

Welding Consumables

• Computing Welding Consumables calculation for jobs.

• Verification of correctness of welding consumables (as per ASME Sec II part C),

backing temperature monitoring and consumables minimum stock.

PWHT

• Verification of Post Weld Heat Treatment, temperature- time chart that PWHT

has been conducted in accordance with specification requirements.

• After PWHT, visual inspection and dimensional check of completed weldment

against specification requirements and drawings.

NDT

• Preparing NDT procedure according to customer requirement

• Organizing NDT in production shop.

• Reviewing of RT films

• Witnessing UT, MT & PT.

• Preparation of NDT reports and its sketch.

Clients

• Boc India Ltd• Technip

• Siemens• ONGC

• EIL• Petrofac

• L&T• Samsung engineering

• Howden UK• Reliance industries

• BHEL• Atlas Copco

• Sandvik• Tarkeer

• Punj Lloyds• TNPL etc

Site Works

• ONGC, Kuthalam – A project of naptha fuel storage tank bottom plate repair work byconducting vacuum box and ultrasonic test methods.

• L&T, Chennai – Attended a nozzle misalignment problem in fuel tank.• Bhushan Steel Plant(Customer- Linde), Odisha – Attended repair work of noise reducing

baffle due to transition damage

Page 4 of 4

Audit Exposures

• Participated in U stamp audit renewal and successfully we got Renewal certificate.• We tried 5 ISO standards in a single attempt for ISO 9001:2008; ISO 14001:2004; ISO

18001:2007; ISO 27001:2013; ISO 50001:2011 and successfully achieved it.

Training Programs

• Attended a Painting and Inspection training program conducted by TATA PROJECTS.• Participated in 5S and KAIZEN training program conducted by CII.• Participated in ISO training programs.

Extra Curricular Activities

• Active team member in Energy Conservation.• One of the lean manufacturing tool of 5S team member.

• KAIZEN team member.

Personal Minutiae

• Date of Birth : 14.09.1989• Nationality : Indian• State : Tamilnadu

• Marital Status : Single• Languages Known : English & Tamil - Read, Write & Speak

• Mother tongue : Tamil

• Passport No : M0798899• Passport Valid upto : 08.08.2024• Date of Issue : 09.08.2014• Place of Issue : Trichy

Declaration

I hereby declare that all the above furnished details are true to the best of myknowledge and belief

Date: 21.09.2015 yours faithfully,

V.Vincent ArockiarajEnd with new beginning