Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
PAGE 1 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
Client Height:
Client Weight (lbs):
A. Seat to Shoulder:
B. Trunk Depth:
C. Chest Width:
D. Knee to Back:
E. Seat to Top of Head:
F. Elbow to Hand:
G. Seat to Elbow:
H. Hip Width:
I. Knee to Heel:
Cushion Thickness:
To ensure system is accurately configured please fill in all required
Quote Order Date of Order: ________ Dealer Account #: ____________________
Dealer Name: ________________________________________________
PO #: ____________________________ Tag _______________________
Purchasing Contact: __________________________________________
Phone: __________________________ Fax: _______________________
E-mail: ______________________________________________________
RTS/Therapist: _______________________________________________
Ship to Address: _____________________________________________
City: ____________________________ Province: __________________
Postal Code: _____________________ Client Gender: M F
Special Client Conditions: ____________________________________
REQUIRED MEASUREMENTSREQUIRED INFORMATION
TDX-SP2 Power Base with Modular Maxx CG Power Positioning System
CDN PRICE LIST AND ORDER FORMPrice Effective October 1, 2019
Customer Service: 1.800.668.5324 I Fax: 1.800.668.5478 I www.invacare.ca
INVACARE POWER BASESTDXSP2 TDX SP2 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7,575
Select STF(1): SLOW 16.75”(2) $250
LOW 17.25” MED 18.25” TALL 19.25”NOTE:
1. Seat-to-floor height is measured at the front of the seat panbased on a standard seat size. Seat-to-floor height may vary+/-.25” dependent on conditions of the power base and seatdepth greater than 18”.
2. Available on Standard base (25.5”) only. Minimum 18” seat depth.Call Customer Service for other options.
USER WEIGHT LIMITS
U300 Weight Capacity up to 300 lbs . . . . . . . . . . . . . . . . . . . STD
PERFORMANCE MOTORS
HSMTR Performance Motors - 7.5 mph(1) . . . . . . . . . . . . . . . . . . . .$995
NOTE: 1. Must order 24TRY Battery Tray Type
TRANSPORT TIE DOWN
TRBKTS Wheelchair Transport Brackets(1) . . . . . . . . . . . . . . . . . . . . STD
NOTE: 1. For unoccupied use only
TIRE OPTIONSB1431-3 14” x 3” Black Tires w/Gel Foam Inserts . . . . . . . . . . . . .STD
B1430-3 14” x 3” Black Tire - Pneumatic . . . . . . . . . . . . . . . . . . N/CFORK OPTIONS
DSFK Double-Sided Fork Package . . . . . . . . . . . . . . . . . . . . . . . .STD
FKPKG Single-Sided Fork Package . . . . . . . . . . . . . . . . . . . . . . . . .$375
BATTERY TRAY TYPE22TRY 22NF Style Tray - Narrow Base 24” . . . . . . . . . . . . . . . . . . N/C
24TRY Group 24 Style Tray - Standard Base 25.5” . . . . . . . . . . N/C
FRAME FINISH163P Black Ice Glossy* . . . . . . . . . . . . . . . . . . . . . . . . N/C
162P Space Station Silver . . . . . . . . . . . . . . . . . . . . . . N/C160P Invacare Blue* . . . . . . . . . . . . . . . . . . . . . . . N/C
158P Lights Out Black Matte . . . . . . . . . . . . . . . . . . . . N/C
154P Rockstar Red . . . . . . . . . . . . . . . . . . . . . . . N/C
155P Tangy Orange . . . . . . . . . . . . . . . . . . . . . . . . N/C
161P Grape Jelly Bean . . . . . . . . . . . . . . . . . . . . . . . . N/C
157P Island Blue . . . . . . . . . . . . . . . . . . . . . . . . N/C
156P Monster Green . . . . . . . . . . . . . . . . . . . . . . . . N/C
159P White Out . . . . . . . . . . . . . . . . . . . . . . . . N/C
*Quick Ship colours will ship in 5 days
RIM INSERT COLORS - MUST PICK ONE163PR Black Ice Glossy . . . . . . . . . . . . . . . . . . . . . . . N/C
162PR Space Station Silver . . . . . . . . . . . . . . . . . . . . . . N/C160PR Invacare Blue . . . . . . . . . . . . . . . . . . . . . . . N/C
158PR Lights Out Black Matte . . . . . . . . . . . . . . . . . . . . N/C
154PR Rockstar Red . . . . . . . . . . . . . . . . . . . . . . . . N/C
155PR Tangy Orange . . . . . . . . . . . . . . . . . . . . . . . . N/C
161PR Grape Jelly Bean . . . . . . . . . . . . . . . . . . . . . . . . N/C
157PR Island Blue . . . . . . . . . . . . . . . . . . . . . . . . N/C
156PR Monster Green . . . . . . . . . . . . . . . . . . . . . . . . N/C
159PR White Out . . . . . . . . . . . . . . . . . . . . . . . . N/C
FOR AADL ONLY, AADL CAT. #W801
PAGE 2 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
LIGHTS AND INDICATORS
LIGHTSLED Lights and Indicators(1) . . . . . . . . . . . . . . . . . . . . . . . . .$995
NOTE: 1. Must order REM216, REM400 or REM500
CONTROLLERS
EXPC Expandable Controller . . . . . . . . . . . . . . .STDGTRAC-LX LiNX G-TRAC Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,200
NON-EXPANDABLE DRIVE CONTROL
REM210 LED Non-Expandable Remote/Joystick (1) . . . . . . . . . . . STD Three drive functions, control of single/dual actuator through drive control.
NOTE: 1. Lights are not available with non-expandable remote.
EXPANDABLE DRIVE CONTROL
REM211 LED Expandable Remote/Joystick (1)(2) . . . . . . . . . . . . . $875 Three drive functions, control of up to 6 actuators through the drive control. Not for use with specialty controls.
REM216 LED Expandable Remote/Joystick with Lights (2)(3) . $875 Three drive functions, control of up to 6 actuators through the drive control and light operation. Not for use with specialty controls.
REM400 Color 3.5” Touch Screen Remote/Joystick(2)(4)(5) . . . $1,100SW400TGL Toggle Kit for REM400(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$200
REM500 LiNX Color 3.5” Touch Screen
Display Only - No Driver Control(2)(3)(4) . . . . . . . . . . . . . . $1,100
PWH Harness Required for Expandable System . . . . . . . . . . N/C
OUTPUT Output Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$645
NOTE: 1. Not available with lights and indicators2. Must choose EXPC Expandable Controller and PWH Harness.3. Must choose lighting package separately.4. Can control lighting, must choose lightng package separately.5. May also be used as display for specialty controls, chose
specialty controls separately.6. Adds 2 toggle switches to REM400.
ATTENDANT DRIVE CONTROL CHOICES
ACU Proportional Attendant Control . . . . . . . . . . . . . . . . .$1,024Select Seating Style for Mounting type
TAM - Tilt & Elevate MountRAM - Recline Mount
Select mounting position
MR - Right ML -Left
SPECIALTY PROPORTIONAL CONTROLS REQUIRES REM400 OR REM500
CREM LiNX Compact Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . $1,097
CREM-LF LiNX Compact Remote Low Force . . . . . . . . . . . . . . . $1,097
LINX* DIGITAL CONTROLS SIP-N-PUFFPKG32666 Therafin Sip-N-Puff Breath Tube Kit . . . . . $440
INPUT LiNX Input Module & Sip-N-PuffInterface(1)(2) . . . . . . . . . . . . . . . . . . . . . . . . $1,800(9 Pin Connection)
NOTE: 1. Only one input module per chair.2. This is required with ASL Drive Controls.OMOUNTING FOR DRIVER CONTROLS
Motion Height Adjustable Swing-Away Quad Link . . . . . . . . .$344
Select Mounting Position:Left Part # SAQL Right Part # SAQR
LINX ELECTRONIC ACCESSORIES
LAK LiNX Access Key(1) . . . . . . . . . . . . . . . . .$50NOTE:
1. Required for programming
JOYSTICK TOPS PC101A Bodypoint U Shaped Handle 3” . . . . . $120
PC102A Bodypoint U Shaped Handle 4” . . . . . $120
PC107A Bodypoint Rubber Dome . . . . . . . . $120
1560 T Handle Flexible JoystickExtension . . . . . . . . . . . . . . . . . . . . . . . $120
1561 Straight Hangle Flexible Joystick Extension . . . . . . . . . . . . . . . . . . . . . . . $120
1826 Chin Cup . . . . . . . . . . . . . . . . . . . . . . . $120
NOTE:
1. To remove/disengage the joystick knob from the REM400 Remotepull straight up on the joystick (DO NOT TWIST) otherwise damagemay occur and may void the warranty.
INSTALLATION OF BATTERIES
22NFBATTERY 22 NF Battery (On Chair) . . . . . . . . . . . . . . . . . . . . . . . . . . . $700
24BATTERY 24 Gel Battery (On Chair) . . . . . . . . . . . . . . . . . . . . . . . . . . $840
BATTERY CHARGER OPTION
110CHARGER 110 Volt Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
OMIT Omit Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/C
PAGE 3 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
SPECIALTY CONTROLS TO BE USED ON CHAIR PLEASE SPECIFY*
Type: __________________________________________________
Specialty Control Mount: Right Left Specify _________________________
Display Mount:Right Left Specify _________________________
Mode Switch Mount:Right Left Specify _________________________
On/Off Mount: Right Left Specify _________________________
List Other: ________________________________________ Specify Mounting Location: ______________________________
*Please order on form 18-395C ASL or specify drive controls to beused if not ordered with chair.
SYSTEMS MUST SELECT ONE SYSTEM
Modular Maxx CG Tilt (50°) Only System . . . . . . . . . $6,969Part # MDCGT-50Part # MDCGT-45(1)
Modular Maxx CG Tilt (50°) and Power Recline (170°) System w/Extended Shear Reduction (ESR) . . . . . . $11,569Part # MDCGTRESR-50Part # MDCGTRESR-45(1)
Modular Maxx CG Tilt (50°) and Power Recline (170°) System w/Synchronized Power Sliding Back (PSB) . . . $12,069
Requires 2-6 function Enhanced ElectronicsPart # MDCGTRPSB-50Part # MDCGTRPSB-45(1)
NOTE:1. Tilt will be reduced to 45° if adding an Elevating Lift Seat Module
Modular Maxx Recline Only System (170°) withExtended Shear Reduction (ESR) Part # MDRESR . . . $10,350
Modular Maxx Recline Only System (170°) withSynchronizes Power Sliding Back (PSB)(1) . . . . . $10,850Part # MDRPSB
NOTE:1. Only available on seat sizes 17” wide and greater.
Modular Maxx Elevate Lift Seat Only System(1)
12” Elevation - up to 250lbs Part # MDES12 . . . . . . . . . . . . $4,995
NOTE:1. Not available on seat sizes greater than 20” wide by 20” deep,
call Customer Service for options.
ELEVATING LIFT MODULE FOR TILT & TILT RECLINE
12” Elevating Lift Module(1)(2)(3) (Scissor Mechanism)Elevation - up to 250lbs max. Part # ESM12 . . . . . . . . . . . . $2,495
NOTES: 1. Uses an integrated Tilt/Lift mechanism, tilt is 45° and the seat to
floor height is not affected by the Elevating Lift Seat.2. Not available on seat sizes greater than 20” wide by 20” deep,
call Customer Service for options.3. For weights greater than 175lbs tilt while elevated is not
available. Call Customer Service for details.
MODULES MUST SELECT SYSTEM-TO ADD MODULES
Recline Body Fit (Minimum finished back widths of 16”) . . . . . . . . . .$995(This option allows the seat back to be narrower than the seat pan. For example an 18”
back pan width with a 20” seat width is accomplished by selecting “2” Narrower” option.)
2” Narrower Part # BFS2 4” Narrower Part # BFS4
10° Fixed Anterior Assist(1) Part # FA10 . . . . . . . . . . . $750
5° Fixed Anterior Assist(1) Part # FA5 . . . . . . . . . . . . . N/C
5° Fixed Pre-Tilt(2) Part # PRETILT . . . . . . . . . . . . . . . . . N/C
8° Precline Module(3) only available with Recline . . . . . . . N/CPart # PRM8
30° Precline Module(3) only available with Recline . . . . . .$500Part # PRM30
Single Post Angle Adjustable Fold Down Back(4)(5)(6)
(Folds to 25° forward) . . . . . . . . . . . . . . . . . . . . . . . . . . .$750 Matrx Interface Part # SPBMI
(Select Matrx back from upgradeable section page 6)
NOTES: 1. This module may limit front rigging options. The 10° Fixed
Anterior Assist option adds approximately 3.6” to the seat tofloor height at zero degrees(level). The 5° Fixed Anterior Assistadds approximately 2” to the seat to floor height at zerodegrees(level).
2. This Fixed Pre-tilt option adds approximately 2” to the front seatto floor height.
3. Total degrees of recline is 170° ie: if 30° degrees of precline isused, then 140° degrees of recline will be available
4. Single Post Back is an angle adjustable back between 73°and 109° in 6° increments from 17° forward to 19° back. Theback folds down and is only available for 16”-20” seat widths& 21”-24” back height. A minimum 4” gap from bottom ofback to seat pan is required.
5. This option is not available with a vent tray and has a 250lbweight capacity.
6. Cane mounted armrests are not available with this option
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
NOTE: Systems Include Seat Pan, Back Pan, and Standard Armrests. They are designed for use with a 2”- 3” cushion
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 4 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
SEAT SPECIFICATIONS
Select Seat Width and Ultra Rail Width Adjustment
16” 17” 18” 19” 20” (Adjustable from 16”- 20”)Part # SW116 SW117 SW118 SW119 SW120
19” 20” 21” 22” (Adjustable from 19” - 22” )Part # SW219 SW220 SW221 SW222
Select Seat Depth and Ultra Rail Depth Adjustment16” 17” 18” 19” 20” 21” (Adjustable from 16” - 21”)
Part # SD116 SD117 SD118 SD119 SD120 SD121
19” 20” 21” 22” 23”(Adjustable from 19” - 23”)Part # SD219 SD220 SD221 SD222 SD223
Small Adult Sizes: Select Seat Width(2)
14”(1) 15”(1) (Adjustable from 14” - 17”)Part # SW314 SW315
Select Seat Depth
14”(1) 15”(1) 16” 17”18” (Adjustable from 14” - 18”)Part # SD314 SD315 SD316 SD317 SD318
NOTES:
1. Small Adult Seat Size - Weight limit is 175lbs on these seatsizes and if Recline is selected it may be limited to 165°of recline. If one of these widths/depths are selected, you canonly select one of smaller depths/widths.
2. Other widths available, please call Customer Service.
LAP BELTS AND CHEST STRAPS Chest Strap 5” W x 24” L (1) Part # CS . . . . . . . . . . . . . . .$210
Padded Lap Belt 2 point(1)
Part # PLB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$170 Padded Lap Belt 4 point(1)
Part # PLB4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$215
Push Button Style Seat Belt . . . . . . . . . . . . . . . . . . . . STDPart # 48” BELT48 60” BELT60 71” BELT71
NOTE: 1. 67” length only option.
CUSHION COVER REFERENCE GUIDE
MATRX SEAT CUSHION OPTIONS*
Matrx Libra Seat Cushion 14”w-20”w . . . . . . . . . . . . .$745LC1414 LC1416 LC1516 LC1518 LC1520LC1616 LC1618 LC1620 LC1716 LC1718LC1720 LC1816 LC1818 LC1820 LC1916LC1918 LC1920 LC2016 LC2018 LC2020
Matrx Libra Seat Cushion 21”w - 22”w . . . . . . . . . $1,025LC1622 LC1722 LC1822 LC1922 LC2022LC2118 LC2120 LC2122 LC2218 LC2220
Matrx PS Seat Cushion 16”w - 20”w . . . . . . . . . . . . . .$569PS1616 PS1618 PS1620 PS1816 PS1818PS1820 PS2016 PS2018 PS2020
Matrx PSVF Seat Cushion 16”w - 20”w . . . . . . . . . . . .$589PSVF1616 PSVF1618 PSVF1620 PSVF1816PSVF1818 PSVF1820 PSVF2016 PSVF2018PSVF2020
Matrx PSP Seat Cushion 16”w - 20”w . . . . . . . . . . . . .$645PSP1616 PSP1618 PSP1620 PSP1816PSP1818 PSP1820 PSP2016 PSP2018PSP2020
Matrx Vi Seat Cushion 16”w - 20”w . . . . . . . . . . . . .$624MA1616-VI MA1618-VI MA1620-VI MA1816-VIMA1818-VI MA1820-VI
Matrx Vi Seat Cushion 21”w - 22”w . . . . . . . . . . . . . .$681MA2016-VI MA2018-VI MA2020-VI MA2218-VIMA2220-VI
FABRIC OPTIONS FOR CUSHIONS
Spacetex Fabric Option for Libra Cushion Part # SFLF . . . . N/C Infection Control Fabric Option for Libra Cushion
Part # ICFL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50 Fusion Fabric Upgrade for Matrx Vi Cushion Part # FFV . . $150 Onyx Fabric Upgrade for Matrx Vi Cushion Part # OCUMA . . $100
Startex Fabric Upgrade for Matrx Vi Cushion Smooth Side up Part # SFVS . . . . . . . . . . . . . . . . . . . . . . . . . . $50
Fabric Side up Part # SFVF . . . . . . . . . . . . . . . . . . . . . . . . . . . $50
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
Infection Control
Onyx
StartexMeshtex
FusionSpacetex
Cushion Meshtex Startex Infection Spacetex Fusion Onyx
Libra N/A STD $50 N/C N/A N/A
PS N/A STD -Reversible
STD -Reversible
N/A N/A N/A
PSP N/A STD -Reversible
STD -Reversible
N/A N/A N/A
Vi STD $50 $50 N/A $150 $100
PAGE 5 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
MATRX ELAN HEADREST PAD *
Matrx Elan Standard Pad . . . . . . . . . . . . . . . . . . . . . . .$310 Part # 6” Pad ESP6 10” Pad ESP10 14” Pad ESP14
Matrx Elan Standard Pad with Infection Control . . .$335 Part #6” Pad ESP6-IC 10” Pad ESP10-IC 14” Pad ESP14-IC
Matrx Elan Occipital Pad . . . . . . . . . . . . . . . . . . . . . . .$341Part #9” Pad EOP9 12” Pad EOP12
Matrx Elan Occipital Pad with Infection Control . . . .$366Part #9” Pad EOP9-IC 12” Pad EOP12-IC
Matrx Elan 4-Point Pad (11”W x 10”H”)Part #Standard Cover E4POINT . . . . . . . . . . . . . . . . . .$448
Infection Control E4POINT-IC . . . . . . . . . . . . . . . .$473
MOTION CONCEPTS HEADREST PAD
Motion Concepts Standard Part # MCSH . . . . . . . . . . . . N/CMotion Concepts Auto Style(1) Part # MCOH . . . . . . . . . .$350NOTE:
1. Comes STD with Fixed Mounting hardware; for use on Matrx PBor Elite Backs you must select removable hardware upgrade on P6.
HEADRESTS HCPCS code E0955
HEADREST MOUNTING HARDWARE OPTIONS
Fixed Mounting (non-removable)(1)(2)
Part # FM . . . . . . N/CMatrx Elan Headrest Hardware- Multi-Axis Removable
Part # MEHWRE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$266Motion Concepts Multi - Axis Removable Mounting
Part # MAHU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$225OMIT: Headrest Part # OHR . . . . . . . . . . . . . . . . . . . . . . . . . . .N/C
NOTE: 1. Unless selecting a “Removable” hdwr option, the headrest
will come standard w/ Fixed Straight Mounting Hardware(non-removable)
FINISHED BACK HEIGHTS
Finished Back heights for Tilt Only Systems(1)(2)
18” 19” 20” 21” 22” 23” 24” 25”Part # FBT18 FBT19 FBT20 FBT21 FBT22 FBT23 FBT24 FBT25
Finished Back heights for Tilt/Recline Systems(3)
20” 21” 22” 23” 24” 25” 26” 27”Part # FBR20 FBR21 FBR22 FBR23 FBR24 FBR25 FBR26 FBR27
NOTES:1. Comes with standard cane height.2. 4” gap is recommended for Tilt systems to allow for the
seat cushion.3. 6” gap is recommended for systems with Recline/ESR and an
8” gap for Recline/PSB.
STANDARD TILT BACK CANESMeasured from Seat pan to top of back cane
18” 20” 22” 24” . . . . . . . . . . . . . . . . . N/CPart # SBC18 SBC20 SBC22 SBC24
Select Cane Angle 75° 79° 85° 90° 95° 101° 106° 112° 116°Part # BA75 BA79 BA85 BA90 BA95 BA101 BA106 BA112 BA116
Angled (5°)Tilt Back Canes 20” 22” 24” . . . . . . N/CPart # ABC20 ABC22 ABC24
Select Cane Angle 81°84° 91° 96° 101° 106° 111° 117°121°Part # BA81 BA84 BA91 BA96 BA101 BA106 BA111 BA117 BA121
Endomorph Back Canes(1)(2) 22” Part # EBC22 24” Part # EBC24
Select: 1” 2” 4” Narrower . . . . . . . . . .$250 Part # EBCN1 EBCN2 EBCN4
10° Mid-Angle Tilt Back Canes(2) . . . . . . . . . . . . . . . . . .$250
18” 20” 22” 24” Part # TBC18 TBC20 TBC22 TBC24
NOTES:1. Comes standard with Cantilever Armrests Cane Mounted.2. Quick Height Adjustment on Backrest not available.3. Not recommended with upgradeable backs as height adjustment is limited.
BACK OPTIONSStandard Rehab Back and Back cushion . . . . . . . . . . N/CSRB16 - 16” wide SRB17 - 17” wide SRB18 - 18” wideSRB19 - 19” wide SRB20 - 20” wide SRB21 - 21” wideSRB22 - 22” wide
Additional Super Soft/HR Foam(1) Part # SS . . . . . . . . . . . . . . .$100 Matrx Fabric Upcharge Part # MFU . . . . . . . . . . . $100
Planar interface plate(3) . . . . . . . . . . . . . . . . . . . . . . . . . N/CRPIF16 - 16” wide RPIF17 - 17” wide RPIF - 18” wideRPIF19 - 19” wide RPIF20 - 20” wide RPIF21 - 21” wideRPIF22 - 22” wide
OMIT: Rigid Back Pan & Cushion(4) Part # ORBC . . . . . . N/COMIT: Back Cushion Only Part # OBC . . . . . . . . . . . . . N/C
NOTES: 1. Additional foam added may impact seat depth.2. Included with all Recline Systems when no back is selected.
May also be used as an interface for after market backs.3. Not available on tilt only or tilt/elevate systems, for use with
recline module.4. Not available with Recline/ESR or Recline/PSB.
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 6 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
BACK COVER REFERENCE GUIDE
UPGRADABLE BACK OPTIONS
High Back 16”-22”wide . . . . . . . . . . . . . . . . . . . . . . . . .$595MHB1616 MHB1618 MHB1620 MHB1716MHB1718 MHB1720 MHB1816 MHB1818MHB1820 MHB1916 MHB1918 MHB1920MHB2016 MHB2018 MHB2020 MHB2116MHB2118 MHB2120 MHB2216 MHB2218MHB2220
Matrx Elite Back 14”-20” wide (3” Contour) . . . . . . . .$766PBE1410 PBE1412 PBE1414 PBE1416PBE1418 PBE1420 PBE1510 PBE1512PBE1514 PBE1516 PBE1518 PBE1520PBE1610 PBE1612 PBE1614 PBE1616PBE1618 PBE1620 PBE1714 PBE1716PBE1718 PBE1720 PBE1814 PBE1816PBE1818 PBE1820 PBE1916 PBE1918PBE1920 PBE2014 PBE2016 PBE2018PBE2020
Matrx Elite HD Back 21”-22” wide (3” Contour) . . . $1,051 PBE2116-HD PBE2120-HD PBE2216-HDPBE2220-HD
Matrx Elite TR Back 15”-20” wide (3” Contour) ..........$866 PBE1516-TR PBE1518-TR PBE1520-TRPBE1616-TR PBE1618-TR PBE1620-TR
PBE1716-TR PBE1718-TR PBE1720-TR PBE1816-TR PBE1818-TR PBE1820-TR PBE1916-TR PBE1918-TR PBE1920-TR PBE2016-TR PBE2018-TR PBE2020-TR
Matrx Elite TR HD Back 21”-22”wide (3” Contour) . $1,151 PBE2120-TRHD PBE2220-TRHD
UPGRADABLE BACK OPTIONS - Cont
Matrx Elite Deep Back 14”-20” wide (6” Contour) . . .$918EDB1412 EDB1416 EDB1418 EDB1420EDB1510 EDB1512 EDB1514 EDB1516EDB1518 EDB1520 EDB1610 EDB1612EDB1614 EDB1616 EDB1618 EDB1620EDB1710 EDB1712 EDB1714 EDB1716EDB1718 EDB1720 EDB1810 EDB1812EDB1814 EDB1816 EDB1818 EDB1820EDB1910 EDB1912 EDB1914 EDB1916EDB1918 EDB1920 EDB2010 EDB2012EDB2014 EDB2016 EDB2018 EDB2020
Matrx Elite Deep HD Back 21”-22” wide (6” Contour) . $1,095EDB2120-HD EDB2220-HD
Matrx PB Back 14”-20” wide (5” Contour) . . . . . . . . . .$734 MPB1412 MPB1416 MPB1612 MPB1616
MPB1620 MPB1712 MPB1716 MPB1720 MPB1812 MPB1816 MPB1820 MPB2012MPB2016 MPB2020
Matrx PB Deep Back 14”-20” (7” Contour) . . . . . . . . . .$892 PBD1412 PBD1416 PBD1612 PBD1616PBD1620 PBD1712 PBD1716 PBD1720PBD1812 PBD1816 PBD1820 PBD2012PBD2016 PBD2020
Matrx PB HD Back(1) 20”-22”wide (5” Contour) . . . . . . $1,051 HDB2016 HDB2020 HDB2216 HDB2220
Matrx PB HD Deep Back(1) 21”-22”wide (7” Contour) . . . . . $1,209 DHD2016 DHD2020 DHD2216 DHD2220NOTE:
1. The Heavy Duty PB Back and PB Deep Back are not availableon Recline systems with seat widths of 21” and 22”.
OTHER UPGRADABLE BACK OPTIONS
Super Soft Foam for Elite Back Upgrade Part # EBSS . . . . . . . .$103Fusion Fabric Upgrade High Back Part # FFUHB . . . . . . . . . . . . .$103 Onyx Fabric Upgrade for High Backs Part # OCUHB . . . . . . . . . . .$103 Onyx Fabric Upgrade for Contour Backs Part # OCUCB . . . . . . . .$103 Infection Control Cover for Elite/PB Backs Part ## WSCU . . . . . .$103
(purchased with back)
Infection Control Cover for Elite/PB Backs Part ## WSC. . . . . . .$150(purchased without back)
Chest Harness Interface Kit for Elite Back (1)(2) Part # CHIEB . . . .$103 Chest Harness Interface Kit for PB Back (1)(2) Part # CHIPB . . . . . . . $52
NOTES: 1. Does not include the chest strap.2. This Interface Kit is only Required for 4 point harnesses.
4-way Stretch PolyesterMeshtex Infection Control
Fusion Onyx
Back Meshtex Polyester Infection Fusion Onyx
Contour N/A STD N/A N/A $100
High STD N/A N/A $100 $100
Elite/ Elite HD/Elite Deep STD N/A $100 N/A N/A
Elite TR/ Elite TR HD STD N/A $100 N/A N/A
PB/PB HD/PB Deep/PB HD Deep
STD N/A $100 N/A N/A
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 7 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
TILT ARMRESTS
Adult Dual Post Adjustable Height With Quick HeightAdjustment Lever(pair) . . . . . . . . . . . . . . . . . . . . . . . . . STD
Select Size: (9.75”-12.75”)(12.75”-15.75”)(15.75”-18.75”)Part # DP1 DP2 DP3
Select : Flat pouch Glove BoxesPart # FP GB
Add: OutBack Arm Option(1) (each) Specify:Select: Right Part # OAR Left Part # OAL . . . . . . . . . . . . .$195
(Allows outward rotation while flipping back armrest)
Ultra Rail Mounted Flip Back Cantilever Maxx Tilt Arm(2)(3) (9”-12.5”) (pair) Part # RMCAN . . . . . . . . . . . . . .$488 Add Dual Post Module (pair) Part # DPM . . . . . . . . . . . . . .$250
Cantilever Arms for Endomorph Back Canes(see page 5)(pair) Part # CAFEBC . . . . . . . . . . . . . . . . . . . . STD
NOTES: 1. Only available with Dual Post and Recline Adjustable Armrests.2. Mounts to Seat Rail.3. Not available with Small Adult Sizes.
RECLINE ARMRESTS
Reclining Adjustable Height (9.5”-13”) (13”-16”) . . . . STD Part # RC1 RC2
Add: OutBack Arm Option(1) (each) Specify:
Select: Right Part # OAR Left Part # OAL . . . . . . . . . . . .$195
(Allows outward rotation while flipping back armrest)
Maxx Style Cane Mounted Height & Width & Angle Adjustable Cantilever Flip Back Armrest for Recline(2) Systems (pair) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$488
Select Straight Arm Configuration - range (9.5”-13”) Part # MCAN1
Select Curved Arm Configuration - range (12.5”-16”) Part # MCAN2
Outback Cantilever Recline Armrest (2)(pair) . . . $350Select Range: (9”-12”)(12”-15”)
Part # OCRA1 OCRA2
Cane Mounted Height & Angle Adjustable Cantilever Flip Back Armrest with/Quick Lock Mechanism(2) for Recline Systems (pair) . . . . . . . . . . . . . . . . . . . . . . . $488
Select Range: (9.5”-12”)(10”-13”)(13”-16”) Part # CANQ1 CANQ2 CANQ3
NOTES: 1. Only available with Dual Post and Recline Adjustable Armrests.2. Not available with small adult seat sizes.
ARMREST TUBE LENGTH - PLEASE SPECIFY
LEFT Armrest Tube Select: Full Part # ATFLDesk Part # ATDL
RIGHT Armrest Tube Select: Full Part # ATFRDesk Part # ATDR
ARM PADS
Modular Arm Pads(1) (each) . . . . . . . . . . . . . . . . . . . . . . .$95Left Full(14”) Part # MAPTFLDesk(10”) Part # MAPTDL
Must select Pad Insert:
Iskin - Integrated soft skin foam Part # ISSFL Startex Covered Visco foam Part # SCVFL
Right Full(14”) Part # MAPTFRDesk(10”) Part # MAPTDR
Must select Pad Insert:
Iskin - Integrated soft skin foam Part # ISSFR Startex Covered Visco foam Part # SCVFR
Standard Pads (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . STDLeft Full(14”)Part # SAPFL Desk(10”) Part # SAPDL
Right Full(14”) Part # SAPFR Desk(10”) Part # SAPDR
Waterfall Arm Pads(2) (each) . . . . . . . . . . . . . . . . . . . . . N/C Left Full(14”)Part # WAPFL Desk(10”) Part # WAPDL
Right Full(14”) Part # WAPFR Desk(10”) Part # WAPDR
Flat Multi Position Pads (each) . . . . . . . . . . . . . . . . . . .$150Left Full(14”)Part # MPAFL Desk(10”) Part # MPADL
Right Full(14”) Part # MPAFR Desk(10”) Part # MPADR
Gel Pads (each)Narrow (2”x12”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$88 Left Part # GAPNL Right Part # GAPNR
Wide (3.5”x12”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$96 Left Part # GAPWL Right Part # GAPWR
Long (3.5”x14”) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$103
Left Part # GAPLL Right Part # GAPLR
Ergonomic Arm Trough (4.5”x13”) Left Part # EATL . . . . . . . . . . . . . . . . . $121
Right Part # EATR . . . . . . . . . . . . . . . . . $121
Flat Hand Pad (4.5”x 5”)(3) - Compatible Only w/Ergonomic Arm Trough
Left Part # FHPL . . . . . . . . . . . . . . . . . . . . . . . . . . .$85 Right Part # FHPR . . . . . . . . . . . . . . . . . . . . . . . . . . .$85
Arm Pad Storage/Cup Holder(3)
Left Part # APSL . . . . . . . . . . . . . . . . . . . . . . . . . . .$295 Right Part # APSR . . . . . . . . . . . . . . . . . . . . . . . . . .$295
OMIT: Armpads(4) (7/8” diameter tube) Part # OAP . . . . . . . . . . N/C
NOTES: 1. Requires interchangeable pad insert.2. Full length pad not compatible with the desk length
armrest tube if using Ultra Rail mounted Tilt Arms.3. Only available on Non-Joystick side.4. Must specify the Arm Tube lengths.
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 8 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
ARMPAD ACCESSORIES
Elbow Block LEFT(1) . . . . . . . . . . . . . . . . . . . . . . . . . . .$195Select Pad Size and Extensions:
XS(3.25”x4.25”) Part # EBXL S(3.5”x5.25”) Part # EBSL
M(3.75”x5.75”) Part # EBML L(4.25”x6.5”) Part # EBLL
Vertical Extension: S(3”) Part # V3 L(5”) Part # V5 Horizontal Extension: S(5”) Part # H5 L(7”) Part # H7
Elbow Block RIGHT(1) . . . . . . . . . . . . . . . . . . . . . . . . . .$195Select Pad Size and Extensions:
XS(3.25”x4.25”) Part # EBXR S(3.5”x5.25”) Part # EBSR
M(3.75”x5.75”) Part # EBMR L(4.25”x6.5”) Part # EBLR
Vertical Extension: S(3”) Part # V3 L(5”) Part # V5 Horizontal Extension: S(5”) Part # H5 L(7”) Part # H7
Matrx Multi-Axis Upper Extremity Support(2) (each) .$257With Quick Adjustment Lever
Left Part # MACESL Right Part # MACESR CES - Cont
1” Offset Armrest Spacer (each) . . . . . . . . . . . . . . . . . . . .$125 (Allows seat width to increase by 2” with Dual Post or Recline Arms)
Left Part # OAS2L Right Part # OAS2R
1/2” Offset Armrest Spacer (each) . . . . . . . . . . . . . . . . . .$125 (Allows seat width to increase by 1” with Dual Post or Recline Arms)
Left Part # OAS1L Right Part # OAS1R
Multi Purpose Arm Pad Adapter Block(3) (each)
Quantity (___) Part # MPAPA . . . . . . . . . . . . . . . . . . . . . .$35
NOTES: 1. Prevents arm from slipping.2. Allows rotation of the armpad, only compatible with Gel pad,
Flat pad or Ergonomic Arm Troughs.3. Not available with Standard Pads or Waterfall Pads.
MAXX LATERALS (1)
Fixed Mounted Lateral Trunk Support LEFT . . . . . . . .$100Select Pad Size:
XS(3.25”x4.25”) Part # LATXL S(3.5”x5.25”) Part # LATSL
M(3.75”x5.75”) Part # LATML L(4.25”x6.5”) Part # LATLL
Fixed Mounted Lateral Trunk Support RIGHT . . . . . .$100Select Pad Size:
XS(3.25”x4.25”) Part # LATXR S(3.5”x5.25”) Part # LATSR
M(3.75”x5.75”) Part # LATMR L(4.25”x6.5”) Part # LATLR
NOTE: 1. These laterals are not available with Matrx PB, PB Elite Deep
and PB Deep Backs.
SELECT SWING AWAY HARDWARE ON NEXT COLUMN TO CONVERT ABOVE SUPPORTS:
MAXX STYLE SWING-AWAY HARDWARE(1)
Maxx Style Swing-away Multi-Adjustable Mounting Hardware LEFT Part # SALATL . . . . . . . . . . . . . . . . . . . .$195
(Standard with 1” telescoping link gives 0-2.75” medial offset (2))
Maxx Style Swing-away Multi-Adjustable Mounting Hardware RIGHT Part # SALATR . . . . . . . . . . . . . . . . .$195
(Standard with 1” telescoping link gives 0-2.75” medial offset (2))
Additional Telescoping Link(each) Quantity ( ) . . . .$75(Adding an additional 1” telescoping link gives up to 5.5” medial offset(2))
LEFT Part # ATLL RIGHT Part # ATLR
NOTES: 1. These laterals are not available with Matrx PB, PB Elite Deep
and PB Deep Backs.2. The amount of offset available may be impacted by back
thickness.
MATRX FIXED LATERALS - FOR ELITE AND ELITE TR BACKS
Matrx Standard Fixed LEFT
Select pad: Standard (7.5” x 5”) Part # PBLSL . . . . . . $116 Small (5.5” x 3”) Part # PBSSL . . . . . . . . . $113
Matrx Standard Fixed RIGHT Select pad: Standard (7.5” x 5”) Part # PBLSR . . . . . . $116
Small (5.5” x 3”) Part # PBSSR . . . . . . . . . $113
Matrx Offset Fixed LEFT Part # PBOLL . . . . . . . . . . . . . . . $125
Matrx Offset Fixed RIGHT Part # PBOLR . . . . . . . . . . . . $125
MATRX SWING AWAY LATERALS - FOR ELITE AND ELITE TR BACKS
Matrx Lateral Trunk Support LEFT pad (each) . . . . .$108
Select Pad Size:
XS(3.25”x4.25”) Part # EPADXL S(3.5”x5.25”) Part # EPADSL
M(3.75”x5.75”) Part # EPADML L(4.25”x6.5”) Part # EPADLL
Matrx Lateral Trunk Support RIGHT pad (each) . . . .$108
Select Pad Size:
XS(3.25”x4.25”) Part # EPADXR S(3.5”x5.25”) Part # EPADSR
M(3.75”x5.75”) Part # EPADMR L(4.25”x6.5”) Part # EPADLR
SELECT SWING AWAY HARDWARE TO CONVERT ABOVE:
Matrx Elite Back Swing Away Hardware LEFT Part # SAHEBL . . . . . . . . . . . . . . . . . . . . . $195
RIGHT Part # SAHEBR . . . . . . . . . . . . . . . . . . . . $195
Matrx Offset Elite Swing Away Hardware LEFT Part # OSAHL . . . . . . . . . . . . . . . . . . . . . . $195
RIGHT Part # OSAHR . . . . . . . . . . . . . . . . . . . . . $195
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 9 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
FIXED HIP/KNEE SUPPORTS
Lateral Hip Support Pad with Fixed Mounting LEFT .$120
Mounted at HIP Pad Size:XS(5.5”W x 4”H) Part # HSPXLH S(7”W x 6”H) Part # HSPSLH
M(9”W x 4”H) Part # HSPMLH L(13”W x 4”H) Part # HSPLLH
Mounted at KNEE Pad Size:XS(5.5”W x 4”H) Part # HSPXLK S(7”W x 6”H) Part # HSPSLK
M(9”W x 4”H) Part # HSPMLK L(13”W x 4”H) Part # HSPLLK
Lateral Hip Support Pad with Fixed Mounting RIGHT . . $120
Mounted at HIP Pad Size:XS(5.5”W x 4”H) Part # HSPXRH S(7”W x 6”H) Part # HSPSRH
M(9”W x 4”H) Part # HSPMRH L(13”W x 4”H) Part # HSPLRH
Mounted at KNEE Pad Size:XS(5.5”W x 4”H) Part # HSPXRK S(7”W x 6”H) Part # HSPSRK
M(9”W x 4”H) Part # HSPMRK L(13”W x 4”H) Part # HSPLRK
REMOVABLE & SWING AWAY HARDWARE UPGRADE
HARDWARE TO CONVERT ABOVE HIP SUPPORT TO UPGRADE TO REMOVEABLE/SWINGAWAY HIP OR KNEE SUPPORTS
Lift Off Removable Hardware for Hip Support (Hip position only)
LEFT Part # LOHL . . . . . . . . . . . . . . . . . . . . . .$195 RIGHT Part # LOHR . . . . . . . . . . . . . . . . . . . . . .$195
Swing Away Removable Hardware for Hip Supports
LEFT Mounted at Hip Part # SHSHLH . . . . . . . . .$215 RIGHT Mounted at Hip Part # SHSHRH . . . . . . . . .$215
LEFT Mounted at Knee Part # SHSHLK . . . . . . . .$215 RIGHT Mounted at Knee Part # SHSHRK . . . . . . . .$215
Maxx Style Quick Release, Removable, Multi-AxisMounting Hardware for Hip Supports
LEFT Mounted at Hip Part # MHSHLH . . . . . . . . .$215 RIGHT Mounted at Hip Part # MHSHRH . . . . . . . . .$215
LEFT Mounted at Knee Part # MHSHLK . . . . . . . .$215 RIGHT Mounted at Knee Part # MHSHRK . . . . . . . .$215
Extended Maxx Style Quick Release, Removable, Multi-AxisMounting Hardware for Hip Supports(1)
LEFT Mounted at Hip Part # EMQHLH . . . . . . . . .$215 RIGHT Mounted at Hip Part # EMQHRH . . . . . . . .$215
LEFT Mounted at Knee Part # EMQHLK . . . . . . . .$215 RIGHT Mounted at Knee Part # EMQHRK . . . . . . . .$215
NOTES: 1. Recomended when finished seat cushion thickness
will be greater then 3.5” high.
LEGREST RECEIVERS
Pride HD Drop-in Receivers Only Part # PHDR . . . . . . . . . . . STDPride Style #8 Swing Away Receivers Only Part # PSAR . . . . STDInvacare Action Receivers Only 70NHD Part # IAR . . . . . . . STDQuickie 70 Swing Away Receivers Only Part # Q70R . . . . . . STDQuickie 70HD Swing Away Receivers Only Part # Q70HDR . . . STDInvacare Hemi-Pin (PHW30) Receivers Only Part # IHPR . . . . STD
STANDARD FRONT RIGGINGFixed Center Mount Foot Platform(1) Part # FCMP N/C Comes standard with a rubber coated footplate 11½” W x 10” Part # IFP
Set at70° 90° 97°Part # SA70 SA90 SA97
Seat pan to footplate: 9”-13” Part # SPTF1Seat pan to footplate: 13”-17” Part # SPTF2
NOTES: 1. 3” ground clearance required.
POWER CENTER MOUNT FOOT PLATFORM OPTIONS
LNX Power Center Mount Foot Platform(1) (2)
Part # LNX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3,20013”-19” unlimited adjustability
Short KTH option 10”-14” unlimited adjustability Part # LNXS . . . N/C
Comes standard with a rubber coated footplate 11½” W x 10” Part # IFP
Comes standard with individual calf pads Part # ICP
Add: One Piece Malleable Calf Panel Part # OPCP . . . . . . . . .$250
Latitude Style Foot Platform Part # LSFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2,995 For Finished Knee to heel measurements of 6.5”-12”
Latitude Style Padded Foot PlatePart # LSPFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$250
NOTES: 1. 2 1/2” of ground clearance required.2. Minimum 18” seat depth when using 16.75” seat to floor height.
MUST BE COMPLETED Measurement in Inches
Knee to Heel:
Cushion Thickness: (Subtract)
Cushion Compression:(Add)
Seat Pan to Footplate:(Total)
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 10 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
MANUAL CENTER MOUNT FRONT RIGGING
Maxx Style Fixed Center Mount Foot Platform(1)(2)
Part # MSFCMFP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $395Comes standard with a rubber coated footplate 11½” W x 10” Part # IFP
Comes standard with individual calf pads Part # ICP
Set at70° 90°97°Part # SA70 SA90 SA97
Seat pan to footplate: 9”-13” Part # SPTF1Seat pan to footplate: 13”-17” Part # SPTF2
Invacare Center Mount Adjustable Knee AnglePart # IAKACM (CTMT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $595
Seat pan to footboard: (9.25” - 12”) Part # SPTF3(12.25” - 15”) Part # SPTF4
Select Individual foot plates or footboard
(5.25”Wx7.5”D) (5.5”Wx9.5”D)(5.9”Wx11.5”D) Footboard
Part # SM Part # MDM Part # LRG Part # FB
Invacare Calf Pads for use with CTMT Part # CALF . . . . . . . . . . . $268
NOTE: 1. Depth and height adjustable. Comes with individual calf pads
and a 11½” W x 10” D rubber coated footplate.2. 3” ground clearance required.
FOOT PLATFORM OPTIONS FOR MAXX/LNX CMFP
Small Flip-up Foot Platform(1) . . . . . . . $180 (12”W x 8.5”D) Part # SFFP
Medium Flip-up Foot Platform(1) . . . . . $180(12”W x 10.75”D) Part # MFFP
Large Flip-up Foot Platform(1) . . . . . . . $250 (14.5”W x 13”D) Part # LFFP
Extra Large Flip-up Foot Platform(1) . . $250(17”W x 13”D) Part # XLFFP
Extra, Extra Large Flip-up Foot Platform(1) . $250(21”W x 13”D) Part # XXLFFP
NOTE: 1. May cause interference with certain bases and seat
widths call to confirm configuration.
INDIVIDUAL FOOT PLATE OPTIONS FOR MAXX/LNX CMFPIn cast aluminum with built in heel cups and rubber mat
Select:
Left:S(5”W x 7.5”D) M(5.5”Wx9.5”D)L(6”Wx11.5”D) $165
Part # IFSL IFML IFLL
Right: S(5”W x 7.5”D) M(5.5”Wx9.5”D)L(6”Wx11.5”D) $165Part # IFSR IFMR IFLR
POWER FRONT RIGGING OPTIONS (1)
Maxx Style Swing-Away Power Elevating Pivot Legrests(2) Part # MSPPL . . . . . . . . . . . . . . . . . . . . .$2,490
Select Receivers: Straight Flared outward 1”Part # RS Part # RF
Seat pan to footplate: S (10”-14”) M (13”-17”) L (16”-20”) Part # SPTF5 SPTF2 SPTF7
Select Function: Individual(3) Combined Synchronized W/Recline Part # INDA COMA SYNA
Calf pad options (Pair) . . . . . . . . . . . . . . . . . . . . . . . . .$275Select: Flat Pads Part # FCPMS
Curved Calf pads(4) (inside width is 6”) Part # CCPMSNOTES:
1. Comes standard with moulded i-skin calf pads.2. Includes Swing Away receivers, Pivot Plus Legrests and
actuators. Legs swing away manually.3. Individual legs count as two functions.4. Not available on 14” and 15” seat widths. For 16” and 17” seat
widths you must select flared receivers.
Select Footplates on page 11 under Foot plate options
MANUAL FRONT RIGGING OPTIONS (1)
Maxx Style Swing-Away Manual Elevating Pivot Legrests Part # MMPPSA . . . . . . . . . . . . . . . . . . . . . . $680
Select Receivers: Straight Flared outward 1”Part # RS Part # RF
Seat pan to footplate: S (10”-14”) M (13”-17”) L (16”-20”)Part # SPTF5 SPTF2 SPTF7
Calf pad options (Pair) . . . . . . . . . . . . . . . . . . . . . . . . .$275Select: Flat Pads Part # FCPMS
Curved Calf pads(2) (inside width is 6”) Part # CCPMSNOTE:
1. Comes standard with moulded i-skin calf pads.2. Not available on 14” and 15” seat widths. For 16” and 17” seat
widths you must select flared receivers.
Select Footplates on page 11 under Foot plate options:
SWING AWAY FRONT RIGGING OPTIONSHeavy Duty 70° Swing away Footrests(1) (Pair) Part # HD70 . . .$495
Select Receivers: Straight Flared outward1”
Part # RS Part # RFSeat pan to footplate:
XS (6”-11”) S (11”-15”) M (13”-17”)L (16”-20”) Part # SPTF11 SPTF8 SPTF2 SPTF7
Calf pads for HD Swing Away Footrests (Pair) . . . . . . . . $275Select: Flat Pads Part # HD70FCP
Curved Calf pads(2) (inside width is 6”) Part # HD70CCPDynamic Coil Springs (Pair) for Heavy Duty 70° Swingaway Footrests Part # DCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$190
Invacare 70° Swingaway Footrests (Pair) Part # I70SAF . . .$325Comes with composite foot plates Part # I70-CF
NOTES: 1. Heavy duty durable construction (4.5lbs ea.).2. Not available on 14” and 15” seat widths. For 16” and 17” seat
widths you must select flared receivers.
Select Footplates on page 11 under Foot plate options
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 11 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
SWING AWAY FRONT RIGGING OPTIONS
Invacare 70° Non-Tapered HD Swingaway Footrests withAT5543 Adjustable Angle Foot plates, Heel Loops andImpact Guards (Pair)Part # 70HDAIH . . . . . . . . . . . . . . . $457
Invacare Tapered 70° Swingaway Footrests with AT5543Adjustable Angle Footplates, Heel Loops and Impact Guards(Pair)(1) Part # 70HTAPAIH . . . . . . . . . . . . . . . . . . . . . . $497
Longer Pivot and Slide Tube for 70° Swingaways (Pair)Part # ALPT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $132
Residual Limb Support(1) (Each) (6.75”W x 9.75”L x 2”H) . . . . . . .$495Select: Left Part # RLSL Right Part # RLSR
NOTES: 1. Swing away and removable, 50° of angle adjustment,
3.5” height adjustment and 2” of for/aft adjustment.
FOOT PLATE OPTIONS FOR ELEVATING &SWING AWAY FRONT RIGGING (1)
Adjustable Angle Foot Plates (each) . . . . . . . . . . . . . . $165
LEFT S(4.25”W x 8”D) M(5.25”Wx8”D) L(6.25”Wx8”D) XL(9”Wx11”D)Part # AFSL AFML AFLL AFXL
RIGHT S(4.25”W x 8”D) M(5.25”Wx8”D) L(6.25”Wx8”D) XL(9”Wx11”D)Part # AFSR AFMR AFLR AFXR
Multi-Axis Adjustable Angle Foot Plates(each) . . . . . $225LEFT S(4.25”W x 8”D) M(5.25”Wx8”D) L(6.25”Wx8”D) XL(9”Wx11”D)Part # MFSL MFML MFLL MFXL
RIGHT S(4.25”W x 8”D) M(5.25”Wx8”D) L(6.25”Wx8”D) XL(9”Wx11”D)Part # MFSR MFMR MFLR MFXR
Adjustable Angle Foot Plates with Caster Cut (each) $165LEFT S(7.25”W x 9”D) M(7.5”W x 11”D) L(10”W x 14”D)
Part # AFCSL AFCML AFCLL
RIGHT S(7.25”W x 9”D) M(7.5”W x 11”D) L(10”W x 14”D)Part # AFCSR AFCMR AFCLR
Multi-Axis Adjustable Angle Foot Plates Caster Cut(each) $225LEFT S(7.25”W x 9”D) M(7.5”W x 11”D) L(10”W x 14”D)
Part # MFCSL MFCML MFCLL
RIGHT S(7.25”W x 9”D) M(7.5”W x 11”D) L(10”W x 14”D)Part # MFCSR MFCMR MFCLR
Heel Loops (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20 Left Part # HLLRight Part # HLR
NOTE: 1. Certain footplate sizes may not fit all seat widths depending on
legrests selected. Call for confirmation if necessary.
DUAL FRONT RIGGING ADAPTOR
Dual Front Rigging Receiver . . . . . . . . . . . . . . . . . . . .$295
Combinations Available please select one:
Maxx Style Fixed with 70° Swing Away Footrests Part # DFRA1Maxx Style Fixed with Power Maxx Swing-Away or Manual Maxx
Swing-Away Legrests Part # DFRA2LNX Power Center Mount with 70° Swing Away Footrests Part # DFRA3LNX Power Center Mount with Manual Maxx Swing Away Legrests
Part # DFRA4
NOTE: 1. Order legs separately on page 9 and 10.
CALF PANEL & STRAP OPTIONS(1)
Airmesh Calf Strap for chairs 15”-18”W - 3.5”H pad height Part # CSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $115
Airmesh Calf Strap for chairs 18”-22”W - 3.5”H pad height Part # CSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $115Airmesh Calf Panel for chairs 15”-18”W;
35.5”W x 9”H pad Part # CPM . . . . . . . . . . . . . . . . . . . $170Airmesh Calf Panel for chairs 18”-22”W;
38.5”W x 9”H pad Part # CPL . . . . . . . . . . . . . . . . . . . $185
NOTE: 1. Not available for Center Mounted Front Rigging.
SINGLE-FUNCTION ELECTRONICS
Select: LeftRightDo Not MountSpecialty ControlsPart # ESML ESMR ESMD ESMS
SINGLE-FUNCTION ELECTRONICS
Single/Dual Function Control Box(1)
Part # SFCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STDPlease Select One: Single Push Button Part # SPB
Single Toggle Part # ST
Dual Push Button Part # DPB
Omit Switch Part # OS
Through Joystick Part # JOY
Through Specialty Control* Part # SC
Add: Reduced Drive for Elevating Seat (3) Part # RDE . . . . . $400
Additional Switch: Single Push Button Part # SPBSA . . . . . $97 Single Toggle Part # STA
Dual Push Button Part # DPBA
NOTE: 1. These electronics include drive lock-out and tilt limit.2. Toggle action only.3. If reduced drive is not selected system will be in drive lock-out when elevated.
F
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 12 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
MULTI-FUNCTION ELECTRONICS
Multi Function Control Box - Switches/Toggles(1)
Part # MFCBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,950Select: Quad Push Button Part # QPB
Four-Way Toggle Part # FWT
8-Way Rocker(2) Part # EWR
Multi Function Through Drive Control(1)
Part # MFCBD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,950
Through Joystick Part # JOY
Through Specialty Control Part # SC
Includes:Reduced Drive for Elevating Seat Yes Part # RDY
No(3) Part # RDN Additional Switch: Quad Push Button Part # QPBA ..................$97 Four-Way Toggle Part # FWTA ...................$97 8-Way Rocker(2) Part # EWRA ..................$150NOTES:
1. These electronics include attendant control, drive lock-out,tilt/recline limit and actuator speed control.
2. Dual function is not available with 8-Way Rocker.3. If reduced drive is not selected system will be in drive lock-out
when elevated.
ELECTRONICS OPTIONS M616 Converter(1) Part # M616S . . . . . . . . . . . . . . . $125
(Allows for multiple switch options with phono plug connection)
Feather Touch Switch - Single function (2) . . . . . . . . . . . . . . .$295Dime Size Part # FTSD Quarter Size Part # FTSQ
Feather Touch Switch - Multi function(2) . . . . . . . . . . . . . .$295Dual Dime Size Part # FTMD Quad Dime Size Part # FTMQ
Stealth Egg Switch - Single function . . . . . . . . . . . . . . .$77 Green Part # SESG Black Part # SESB
Power Shut Off Switch -Toggle Switch Only (1)
Part # PSOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$175
Lazarus Jump Starter(1) Part # LJS . . . . . . . . . . . . . . .$150
Accessory Port Power Supply(1)(3 amp capacity) Part # APPS $195
12 Piece Switch Mounting Hardware Kit Part # TPSMH . .$39(additional kits)
NOTE: 1. Not available with the Standard Electronics option.2. Must specify what function this switch will utilize.
VENT TRAYS(1)(2)(3)
Vent Tray - Articulating(4) (Without battery tray) . $1,350
Horizontal (14W x 15D x 10H) Part # ARTVTHVertical (14.625W x 10.125D x 13H) Part # ARTVTV
Vent Tray - Trilogy 100/200 (14W x 6D) Part # TRILVT $1,350NOTES:
1. The user weight limit is 225 lbs.2. The maximum weight capacity of the vent tray is 35 lbs.3. Vents are not standard configuration on Elevating or Precline
Systems or with Single Post Backs.4. Required for use on Recline Systems.
COMPACT-LAPTOP VENT TRAYS(1)(2)(3)
Vent Tray Part # CVT . . . . . . . . . . . . . . . . . . . . . . $1,350
Vent Bag Holder - Articulating(4)(5) Part # VBHA . . . . . . . . $990
Vent Bag Holder - Non-Articulating Part # VBHNA . . . . . $525NOTES:
1. The user weight limit is 225 lbs.2. The maximum weight capacity of the vent tray is 35 lbs.3. Vents are not standard configuration on Elevating or Precline
Systems or with Single Post Backs.4. Required for use on Recline Systems.5. Motion Concepts does not supply the Vent Bag.
ADDITIONAL BATTERY TRAY
TDX-SP2 Base - 3 x Group 22 Battery Tray(1)(2)
Part # TDXSP2-322 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $500
NOTE: 1. Comes with steel battery door cover.
2. Must be ordered with Standard Group 24 TDX-SP2 base.
O2 HOLDERS(1)(2)(3)
Non-Articulating O2 Gas Holder Part # NAO2H . . . . . . . . . $395(Cylinder Style)
Articulating O2 Gas Holder . . . . . . . . . . . . . . . . . . $1,250
Select:
O2 Gas (Cylinder Style) Part # AOHGLiquid O2 (6.5” x 4.5”) Part # AOHL
Non-Articuating IV Pole . . . . . . . . . . . . . . . . . . . . . . . $395
Users Left Part # NAIPL Users Right Part # NAIPR
Articuating IV Pole Part # AIVP . . . . . . . . . . . . . . . . . . .$1,250NOTE:
1. Articulating O2 holders are not standard configurations onPrecline System, please call for quotation.
2. Client weight capacity is 225 lbs when using an O2 holder.3. The weight capacity of the O2 holder is 20 lbs.
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System
PAGE 13 For the most current pricing information visit www.invacare.ca
Note: All specifications and dimensions are approximate.Form:18-393AADL Rev 10/1/19
ADDITIONAL OPTIONS & ACCESSORIES
Concepts Back Pack Single Part # SBP . . . . . . . . . . . . . $125Double Part # DBP . . . . . . . . . . . . $195
Transfer Handles (Height Adjustable) . . . . . . . . . . . . . . . . . $350 Select: 4”-6.5” Part # THS 9”-11.5” Part # THL
Push Handles for Recline Systems (1) . . . . . . . . . . . . . . $350 Select: Straight Part # RPHS Angled Part # RPHA
D-Loops (set of 2)(2) Part # DL00P . . . . . . . . . . . . . . . . . . $250
Flip & Fold Away 1/2 Lap Tray(3) (14”W x 10”D) . . . . . . $795
Select Mounting:Left Part # FFLTL Right Part # FFLTR
NOTES: 1. 4” of total vertical mounting adjustment.2. May increase seat to floor heights by approximately 3/8”.3. Not available on joystick side and only available with a flat
arm pad or modular arm pad. Not available on OutbackCantilever Recline Armrests.
INSTALLATION Installation by Motion Concepts(1) Part # MCI . . . . . . . . . N/C
NOTE: 1. Batteries may be required if items on Accessories order form are
selected at time of installation, please call to confirm.
Total Retail Value $
NOTES:
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Dealer Name: _______________________________________________
Dealer Account Number: ____________________________________
PO #:_______________________________________________________
Tag: _______________________________________________________
TDX-SP2 Base with Modular Maxx CG Power Positioning System