EDITION 2016

REPEATERS FOR CELLULAR TELEPHONE

GSM 900 MHz

DCS 1800 MHz

UMTS 2100 MHz

LTE 2600 MHz

THE MOST ADVANCED IN THE MARKET !THE MOST ADVANCED IN THE MARKET !

• EU APPROVAL CE0523 – CE1987• FREE USE• PATENT PENDING• SOLD AND USED IN MORE THAN 40 COUNTRIES WORLDWIDE

• EU APPROVAL CE0523 – CE1987• FREE USE• PATENT PENDING • SOLD AND USED IN MORE THAN 40 COUNTRIES WORLDWIDE

F IELD EXTENDERS

LTE 800 MHz

www.microset.net2

GSM - DCS - UMTS 3G - LTE 4G MOBILE TELEPHONEREPEATERS - FIELD EXTENDERS

The MICROSET repeaters - field extenders are very reliable and efficient equipments, useful to repeat the mobile telephone signal from outdoor (roof) where it is operative to indoor of the building where low level or absent, also outdoor-outdoor in shadow areas.

All models have RTTE ETSI test approval, free use and installation.Patent pending. Sold in more than 40 Countries all over the world.

Warning of imitations, they are not reliable and without test approval.Only MICROSET is experienced from more than 20 years.

Frequency bandsThe most popular bands in Europe for voice and GPRS data traffic are GSM 900MHz and DCS 1800MHz; 3G-UMTS and new LTE- 4G bands are useful mainly for fast internet use.There are available dual band models GSM+UMTS and GSM+DCS and both with LTE facility.

Communication capacityAll models are wide band and repeat all communications, the limit of the channels is only from the provider cell.The indicate channel capacity for each model is only the Rules recom-mendation, no channel limitation.

Standard delivery kitAll models include the necessary hardware for installation, including coaxial cables 10mt length with assembled connectors.Optional 10-20-33mt extension coax cables with plugs and kit splitter to expand and improve indoor coverage.

MICROSET PATENT – ALL RIGHTS RESERVED.

SPLITTER

REPEATER

SPLITTERREPEATER

www.microset.net

Typical applications:

- Houses- Offices- Restaurants- Hospitals- Large industrial areas- Factories- Underground car parks- Motorways and railways tunnels- Small valleys

3

Technical supportFor large applications like shopping centres, hotels, plants, warehouses, hospitals etc., MICROSET can make a project for easy, fast and sure installation.

Installation on mountains and remote areas by solar panels and battery for operating also without local power network.

Installation into motorway tunnels and galleries.

SPLITTER

UNDERGROUND CAR PARK

REPEATER

MOTOR WAY TUNNELS

REPEATER

REPEATER1 km

INTRODUCTION

TEST APPROVAL

FREE USE

www.microset.net4

Versions MONO PROVIDER: include external high gain directional antenna, useful where the outside signal level is low and only one provider to support, more operators service with cells placed on the same direction.

BAND MODEL VERSION TYPICAL COVERAGE

BT10 100-200m²

BT10-OM 80-150m²

BT20L-Standard 500-1.200m²

BT20L-OM 400-800m²

BT20-Standard 5.000-10.000m²

BT20-OM 4.000-8.000m²

BT20-CT4 500-1500mlinear coverage

2G GSM900MHz

Operate:Voice - dataGPRS-EDGE

FREQUENCY:815-890MHz935-960MHz

800-1.500m²2G GSM + DCSDUAL BAND900MHz+1800MHz Voice - data GPRS/EDGE

500-700m²

BT15-standard 100-200m²

BT15-OM 80-150m²

3G UMTS2100MHz

HSPA - Fast internet BT45 3.000-8.000m²

BT20-DCS 500-900m²DCS 1800MHz

Voice - data GPRS/EDGE

4G LTE2600MHz Ultra fast internet

BT20-LTE 600-800m²

MULTIBAND systems facility: BT20-DUAL GSM/UMTS + BT20-DCS

BT20-DUALstandard 800-1.500m²

BT20-DUAL/OM 400-700m²

BT20-DUAL/COL2

1.000-1.800m²

2G GSM3G UMTSDUAL BAND900MHz+2100MHz

Voice - data GPRS-EDGEHSPA - Fast internet BT20-

DUAL/COL4

Mono-provider

All providers

Mono-provider

All providers

Mono-provider

All providers

Mono-provider

Mono-provider

All providers

Mono-provider

All providers

Mono-provider

Mono-provider

Mono-provider

Mono-provider

All providers

All providers

All providers

Mono-provider

1.000-2.000m²

NEW

NEW

NEW

BT20-DUALG-D/OM

BT20-DUALG-D standard

SELECTION TABLE

4G LTE800MHz Fast internet

BT10-LTE 800 200-800m²NEW

More characteristics see:

Versions ALL PROVIDERS: include external omnidirectional antenna; use where outside signal level is full and more operators cells placed in different positions.

APPLICATION DOWN LINK GAIN PLUGS Vdc PAG.

BT20-DUAL GSM/UMTS + BT20-LTE - BT10 + BT10-LTE 800

outdoor-indoor 50-55dB SMA-F

SMA-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

TNC-F

SMA-F

SMA-F

9V

9V

9V

9V

9V

9V

9V

9V

9V

9V

9V

9V

9V

10V

10V

10V

12V

10V

6

outdoor-indoor 50-55dB 6

outdoor-indoor 65dB 7

outdoor-indoor 65dB 7

outdoor-indoor 90-95dB 8

outdoor-indoor 90-95dB 9

outdoor-outdoor 90-95dB 10

outdoor-indoor

outdoor-indoor

outdoor-indoor

outdoor-indoor

outdoor-indoor

esterno-interno

outdoor-indoor

outdoor-indoor

outdoor-indoor

outdoor-indoor

outdoor-indoor

65dB 15

1565dB

50-55dB 11

50-55dB 11

80dB 14

65dB 16

1765dB

65dB 12

65dB 13

13

13

65dB

65dB

ROOF ANTENNA

one directional LOG5 (30°)

one omni MC900 (360°)

one directional LOG10 (20°)

one omni MC900 (360°)

two directional LOG10 (20°)

two omni MC900 (360°)

two directional LOG10 (20°)

one directional MD14-GD (70°)

one omni MD6 (360°)

one directional MPU15 (60°)

one omni MD3 (360°)

two directional MPU15 (60°)

one directional MPD15 (70°)

one directional M15-LTE (50°)

one directional MD14 (70°)

one omni MD6 (360°)

Collinear COL2

Collinear COL4

(2 panels)

(4 panels)

www.microset.net 5

SMA-F 9Voutdoor-indoor 1750-55dB

www.microset.net6

The BT10 is a professional repeater with 50-55dB gain, very reliable and efficient able to cover up to 200-300 square meters.It operates on GSM 900MHz wide band for voice and GPRS/EGDE data. Useful to expand up to 20 simultaneous communications inside building where signal is poor or absent from roof where well operative.

The STANDARD or single provider version uses an external high gain directional antenna, 30° coverage angle, that must be set-up to provider cell.

The OM version called multi-providers uses omnidirectional roof antenna operative on 360° with limited gain, not needs any direction set; only for high level roof signal application.

Typical Applications: houses, offices, shops, restaurants, small buildings.

Delivery kit: All the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 50-55dB gain• 1 power supply 230VAC 50Hz

Options : 2-ways kit splitter mod. KS2-10 to expand indoor coverage on 2areas. Extension coax cable 10m PR10-SMA. Indoor ceiling omnidirectional antenna C7.

Small-medium coverage 200-300m² - Gain 55dB

2G REPEATERGSM/GPRS 900MHz

GOOD PERFORMANCE , VERY RELIABLE

Indoor Coverage: 200-300m²

Copertura interna: 80-150m²

SINGLE PROVIDERBT10-STANDARD

MULTI PROVIDERBT10-OM

BT 10

www.microset.net 7

Medium-large coverage up to 3000m² - Gain 65dB

2G REPEATERGSM/GPRS 900MHz

The BT20L is a professional repeater with high gain 60-65dB and automatic level control (ALC), very reliable and efficient, able to cover up to 1200 square meters, expandable by optional kit splitter and adequate project up to 2.000-3.000 square meters of indoor coverage.It operates on GSM 900MHz wide band for voice and GPRS/EGDE data (low speed); typical capacity up to 30-40 simultaneous commu-nications from outside building where signal is well operative to inside where poor or never.

The STANDARD version called single provider uses an external high gain directional antenna, 20-30° radiation pattern, that must be directed to provider cell.

The OM version called “all providers version” uses external omnidi-rectional antenna operative with limited gain but it not need any direction set (360° radiation), usable only with high level roof signal.

Applications: shops, restaurants, offices, plants, buildings, tunnels, underground car-parks etc.

Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz

Options: Kit splitter KSL 2-3 ways to improve indoor coverage.Extension coax cables PR10-20-33.Indoor ceiling omnidirectional antenna C7.Collinear roof antenna COL2 or COL4 very high gain.Project for big building installation.

Indoor Coverage 500-1200m²

Indoor Coverage 400-800m²

SINGLE PROVIDERBT20L-STANDARD

MULTI PROVIDERSBT20L-OM

BT 20L

www.microset.net8

The BT20 is a powerful and very reliable repeater for mobile telephone applications on GSM 900MHz band and supports voice and GPRS/EDGE standard speed data traffic.

Very high gain better than 95dB on down-link channel with low noise antenna preamplifier, it is useful also in critical applications for wide coverage areas up to 10.000 square meters and typical channel capacity up to 30-40 simultaneous communications.

Double antennas system up-link and down-link: two roof external antennas and two inside coverage antennas are necessary for high gain operation.

The BT20-STANDARD called one provider direction version includes two directional roof antennas high gain (14dBi), 20-30° radiation pattern, that must be directed to provider cell.

Options: Kit splitter to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7. Project for big building installations.

Wide coverage - Gain 95dB

2G REPEATERGSM/GPRS 900MHz

External signal level:

min 2 on 5 fullExternal antennaradiation pattern

ONE PROVIDER DIRECTIONBT 20-STANDARD

Indoor Coverage :up to 10.000m²

BT 20

www.microset.net 9

Wide coverage - Gain 95dB

2G REPEATERGSM/GPRS 900MHz

MULTI PROVIDERSBT 20-OM

The BT20-OM or multiprovider version includes two omnidirectional roof antennas MC900 operative on 360° with limited gain (6,5dBi) but they not need any direction set, mostly useful in application with high signal level on roof.

Applications:large industrial areas, factories, shopping centres, hotels,motorways and railways tunnels, underground car parks etc.

Typically from OUTSIDE to INSIDE building where signal is normally poor or never.

Delivery kit includes all the main hardware for easy installation:• 2 roof antennas with 10mt cable and connectors• 2 indoor panel antennas with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50-60Hz

External antennaradiation patternExternal

signal level:min 3-4 on

5 full

Indoor Coverage :up to 8.000m²

BT 20

www.microset.net10

NECESSARYOPERATINGCONDITION:

• GOOD INPUT SIGNAL LEVEL

• CLEAR SIGNAL DIRECTLY FROM PROVIDER CELL

• WELL INSULATION BETWEEN INPUT AND OUTPOUT ANTENNAS

Outdoor-outdoor application - Gain 95dB

2G REPEATERGSM/GPRS 900MHz

Installation insmall valley

The BT20-CT4 is an efficient and very reliable repeater for mobile telepho-ne OUTDOOR-OUTDOOR applications able to extend GSM/GPRS signal on 900MHz band on small valleys, villages, hills and open-space working areas, shadow zones.

It operates on wide band and supports voice and GPRS/EDGE standard speed data traffic with capacity of 20-30 simultaneous communications.

Very high gain better than 95dB in down-link channel with low noise antenna preamplifier. It uses double antennas system: two directional antenna on input side (radiation pattern 20-30°) and two High Gain collinear output antennas with adjustable radiation pattern.

Delivery kit includes all the main hardware for easy installation:• 2 input directional antennas LOG10 with 10mt cable andconnectors• 2 output collinear antennas CT4 (max coverage 180°) with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50Hz

Options:Extension coax cables PR10-20-33mt.Solar panel with battery kitVery high gain input collinear antennas COL2-COL4.

Installation: input antennas must be placed on good signal position,output collinear antennas on shield position than input side againstoscillations and signal interference also at provider network.

Installation only from well trained personnel.After installation check correct operation by spectrum analyzer instrument.

BT 20 - CT4

www.microset.net 11

Medium coverage 200-300m² - Gain 55dB - High speed data transmission

3G REPEATERUMTS 2100MHz

The BT15 is a professional repeater on UMTS band with good gain 50-55dB, very reliable and efficient able to cover up to 200-300 square meters indoor.It operates on 3G UMTS 2100MHz wide band for internet data high medium speed traffic (UMTS/HDPA) and it can repeat many simulta-neous communications inside building where signal is poor or absent from roof where well operative.

BT15 can’t support voice on GSM 900MHz nor DCS 1800MHzband.

The BT15-STANDARD or single provider version uses an external high gain panel antenna, wide coverage pattern 70°, that must be directed to provider cell.

The BT15-OM version or multi-providers version includes roof omnidi-rectional 360° antenna with limited gain but it not need any direction set, usable only with very high signal level on the roof.

Typical Applications: houses, small offices, shops, restaurants,small buildings.

Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 50-55dB gain• 1 power supply 230VAC 50Hz

Options : 2-ways kit splitter to expand indoor coverage on 2 areas. Extension coax cable 10m PR10-SMA. Indoor ceiling omnidirectional antenna C7.

Indoor Coverage: 100-200m²

Indoor Coverage: 80-150m²

SINGLE PROVIDERBT15-STANDARD

MULTI PROVIDERBT15-OM

BT 15

www.microset.net12

The BT20-DUAL is a professional dual band GSM/UMTS repeater for mobile telephone applications with high gain 60-65dB and automatic level control (ALC) and interference alarm, very reliable and efficient, able to cover up to 1.000 square meters expandable, with kit splitter option and adequate project can reach 2.000-3.000 square meters of indoor coverage.

It operates on two bands at the same time: GSM 900MHz wide band for voice and GPRS/EGDE data (low speed) and 3G-UMTS 2100MHz for fast internet traffic on wide band.

Useful to extend typically 20-30 simultaneous communications from outside building where signal is well operative to inside where poor or absent.

The BT20-DUAL-STANDARD or one provider direction version uses an external panel antenna MD14 with high gain (14dBi) that must be directed to one or more provider cells into radiation pattern 60-70°.

For all providers application and low external signal condition, it is recom-mended a collinear high gain antenna COL2 or very high COL4, also on kit splitter use.

ONE PROVIDER DIRECTIONBT20-DUAL/STANDARD

External signal level:

min 2 on 5 full

External antennaMD14radiation pattern

Indoor Coverage : 800-1500m²

Medium-large coverage up to 3000m² - Gain 65dB

2G GSM 900MHz 3G UMTS 2100MHz DUAL BAND

BT 20-DUAL

www.microset.net 13

The BT20-DUAL/OM or multiprovider version includes an external omnidirectional antenna MD6 operative on 360° with limited gain (6dBi) but it not need any direction set, usable just high signal level on roof and only one indoor antenna.Kit splitter applications, use COL2-COL4 antennas option.

Applications:offices, factories and warehouses, shopping centers, hotels, restau-rants, underground car parks, houses.

Delivery kit includes all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz

Options: Kit splitter to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7. Collinear high gain roof antenna COL2 -COL4. Project for big installations.

MULTI PROVIDERSBT20-DUAL/OM

Indoor Coverage : 400-800m²

External signal level:min 3-4 on

5 full

External antennaMD6radiation pattern

Medium-large coverage up to 3000m² - Gain 65dB

2G GSM 900MHz 3G UMTS 2100MHz DUAL BAND

BT 20-DUAL

www.microset.net14

Wide coverage - High gain 80dB - High speed data transmission

3G REPEATERUMTS 2100MHz

The BT45 is a professional, powerful and very reliable repeater for mobile telephone applications on 3G UMTS 2100MHz band and supports fast internet data traffic.

Very high gain better than 80dB on down-link channel with low noise antenna preamplifier, it is useful also in critical applications to expand signal on wide coverage areas 3.000-8.000 square meters.

Typical channel capacity up to 10-20 simultaneous communications from outside building where signal is well operative to inside where poor or absent.BT45 can’t support voice on GSM 900MHz nor DCS 1800MHz band.

Double antennas system up-link and down-link: two roof external antennas and two inside coverage antennas are necessary for high gain operation.

Applications: offices, shops, hotels, plants, houses etc.

Delivery kit includes all the main hardware for easy installation:• 2 roof antennas with 10mt cable and connectors• 2 indoor antennas with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50Hz

Options:Kit splitter to improve indoor coverage Extension coax cables

PR10-20-33. Indoor ceiling omnidirectional antenna C7.

Indoor Coverage : 3.000-8.000m²

External antennaMPU15radiation pattern

BT 45

www.microset.net 15

2G GSM 900MHzDCS 1800MHz DUAL BAND

The BT20-DUAL GD is a professional dual band GSM/DCS repeater for mobile telephone applications with high gain 60-65dB, automatic level control (ALC) and interference alarm, very reliable and efficient, able to cover up to 1.000 square meters expandable, with optional kit splitter and adequate project can reach 2.000-3.000 square meters of indoor coverage.It operates on two bands at the same time: GSM 900MHz and DCS 1800MHz wide band for voice and GPRS/EGDE data with typical capaci-ty 20-30 simultaneous communications from outside building where signal is well operative to inside where poor or absent.

The STANDARD version uses an external panel antenna with high gain (14dBi) that must be directed to provider cell, to prefer with low external signal.

The OM or multiprovider version includes external omnidirectional 360° antenna with limited gain doesn’t need direction set. Usable only with very high signal level on the roof (full range).

Applications: shops, restaurants, offices, factories houses, tunnels, underground car parks, etc.

Delivery kit includes all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz

Options: Kit splitter KSD-GD 2-3 ways to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7 Collinear high gain roof antenna COL2-GD or very high gain COL4-GD

Indoor Coverage: 800-1500m²

Indoor Coverage: 500-700m²

SINGLE PROVIDERBT20-DUAL G-D STANDARD

MULTI PROVIDERBT20-DUAL G-D / OM

NEW

Medium-large coverage up to 3000m² - Gain 65dB

BT20-DUAL G-D

www.microset.net16

Voice and GPRS/EDGE data trafficGain 65dB

DCS REPEATER 1800MHz

The BT20-DCS is a new professional repeater with high gain 60-65dB and automatic level control (ALC), very reliable and efficient, operative on DCS 1800MHz wide band for voice and GPRS/EDGE data traffic, able to cover up to 900m² expandable by kit splitter, typical capacity up to 10-20 simultaneous communications.BT20-DCS usable to extend the signal from roof where is well to inside building where it is poor level or never.

BT20-DCS can be installed alone or combined with a BT20-DUAL to have 3 bands repeater system GSM-DCS-UMTS.See below installation example.

Delivery kit : all the main hardware for easy installation:• 1 roof high gain panel antenna MPD15 with 10mt cable andconnectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB• 1 power supply 230VAC 50Hz

Options: Expanding Kit splitter 2 or 3-ways Extension coax cables PR10-PR20-PR33 Indoor ceiling antenna C7 Roof high gain collinear antenna 2 or 4 panels.

Indoor Coverage: 500-900m²

NEW

External antennaMPD15radiation pattern

3-bands GSM-DCS-UMTS

NEW

BT20-DCS

The BT20-LTE 4G is a new reliable and very efficient repeater with high gain 60-65dB and automatic level control (ALC), operative on the new LTE band 2600MHz with very fast data speed of data transmission up to 100Mb. Actually the LTE network is in progress but still operative in the main cities.

Useful to extend many simultaneous communications from roof where signal is well operative, to inside building where poor level or absent.

BT20-LTE can be installed alone, monoband system, or combined with other Microset repeaters to obtain 3-bands or 4-bands systems. See below installa-tion examples.

The new BT10-LTE 800 operates on low band 800MHz usable on rural area far away from provider cell, for fast data communications.Combine facility with BT10-GSM900.

Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and assembled connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 55-65 gain• 1 power supply 230VAC 50Hz

Options: COL2 LTE high gain collinear antenna Kit splitter 2-3 ways.

www.microset.net 17

Ultra fast data - Gain 65dB

4G REPEATERLTE 800-2600GHz

BT20-LTENEW

BT10-LTE 800

KIT SPLITTER5 WAYS

KIT SPLITTER2 WAYSMP10-4

MP10-4

BT20LTE

COMBINERCOMBINER 1

COMBINER 2

LTEGSMUMTS GSM

UMTS

M15-LTE

LTE

M15-LTEDCSMPD-15MD14

COL-2 COL-24-bandsGSM-DCS-UMTS-LTENEW

OUT IN

BT20LTE

OUT IN

BT20DCS

OUT INBT20DUAL

IN OUT

BT20DUAL

IN OUT

MD14

3-bandsGSM-UMTS-LTENEW

www.microset.net18

SINGLE cable system

KIT SPLITTER MODEL REPEATER APPLICATION

KS2-10

BT20L KSL2 KSL3

2 ways

2 ways 3 ways

DOUBLE cables system Up-down link

BT10

KS2-15 2 waysBT15

BT20-DCS KS2-DCS KS3-DCS

2 ways 3 ways

BT20-DUAL KSD2 KSD3

2 ways 3 ways

BT20-DUAL G-D KSD2-GD KSD3-GD

2 ways 3 ways

BT20-LTE KS2-LTE KS3-LTE

KSP2-45KSP3-45

2 ways 3 ways

KIT SPLITTERFOR REPEATERS

The kit splitters, joined to Microset repeaters, are useful to expand the mobile telephone signal into building with several floors or different rooms with walls to limit signal propagation.

All kit splitters include the main hardware for installation:additional antennas, coaxial combiners, 10mt coax cables withassembled connectors.

2 ways Kit splitter: totally 2 indoor antennas 3 ways Kit splitter: totally 3 indoor antennas.

Option:Extension low loss coax cable units.Project of installation for large application.

BT20 KSP2KSP3

2 ways 3 ways

3 ways BT45 2 ways

KSP2 2 ways KSP3 3 wayse

DOUBLE CABLES VERSIONSCOMBINER 2 VIE

BT20BT40BT45

TX RX

TX RX3-4m

BT20 SPLITTER

KS

www.microset.net 19

KIT SPLITTERAPPLICATION

COMBINER 3 WAYS

COMBINER 2 WAYS

COAX CABLES length 10mtincluded in BT20L/BT20DUAL

BT20 LBT20-DUAL

TNC

TNC

TNC

TNC

TNC

TNC TNC

TNC TNC

SPLITTER

REPEATER

SPLITTERREPEATER

2 WAYSKIT SPLITTER

4 WAYSKIT SPLITTER

KSL2 + KSL3KSD2 + KSD3

3 WAYSKIT SPLITTER

DIRECTIONALOMNIVERSION

10mt 10mt

BT10-BT15 BT20 LBT20 DUAL BT20-DCSBT20-LTE

PANELOMNIVERSION

BT20 L BT20 DUALBT20-DCS BT20-LTE

10mt

10mt

10mt

COLLINEAR PANEL

ROOF ANTENNAGSM 900

UMTS 2100

ROOM 1 ROOM 2

ROOM 3 ROOM 4

10mt

10mt

10mt

10mt

Installation on multifloorbuilding.

Underground multi-floors carparks.

SINGLE CABLE VERSIONS

KS

www.microset.net20

COAX CABLEEXTENSIONS

Very low loss coaxial cables units useful to extend over 10mt standard delivery coax cables (for outdoor and indoor antennas); supplied with assembled connectors and electric test.Three available versions:

• PR use TNC male/TNC female Useful to extend antenna cables,All repeaters (except BT10-BT15)

• PRS use two connectors TNC maleSplitter to splitter connection:

• SMA available only 10mt length,Use SMA male / SMA femalefor BT10-BT15 repeaters cables.

Cable Diameter Ø 15 mmConnectors size Ø 20 mmBend radius 40 mm

LOW LOSS COAX CABLES

VERY LOW LOSS COAX CABLESMICROWAVE AND LONG APPLICATION

WARNING!Different types of coaxial cables, not original Microset, couldreduce drastically the repeater efficiency.

CONNECTOR SIZE

TNCfemale

TNCmale

MODEL CONNECTORS LENGHT(mt)

DIAMETERØ (mm)

INSERTION LOSS900MHz 2000MHz

PR 10

PR 20

PR 33

PR10-SMA

PRS 10

PRS 20

PRS 33

10 10 TNC M/F 2.0dB 2.8dB

20 10 TNC M/F 3.5dB 5.0dB

33 10 TNC M/F 6.0dB 8.0dB

10 5 SMA M/F 3.5dB 5dB

10 10 TNC M/M 2.0dB 2.8dB

20 10 TNC M/M 3.5dB 5.0dB

33 10 TNC M/M 6.0dB 8.0dB

MODEL LENGHT(mt)

INSERTION LOSS1GHz

PRL 10

PRL 20

PRL 30

PRL 40

PRL 50

10 1.0dB 1.5dB

20 2.0dB 2.8dB

30 3.0dB 4.5dB

40 4.0dB 5.5dB

50

CONNECTORS

TNC M-M

TNC M-M

TNC M-M

TNC M-M

TNC M-M 4.8dB 7.0dB

NEW

2GHz

PR-PRS-PRL

www.microset.net 21

Service also with short and long black-out

D.C. UNINTERRUPTIBLE POWER SUPPLY FOR REPEATERS

Solar panel system able to generate DC “green” power from the sun, for supplying Microset repeaters or others electronic equipments and lights, without use any fuel.

Includes:1 solar panel 230-250W2 batteries 12V 40Ah1 DC-DC converter from 24VDc to out 9V / 12Vdc1 connection wiring

Mod. PF12 Output 12VMod. PF 9 Output 9V

SOLAR GENERATOR

Solar panel24Vdc 250W

2 Batteries12V 40Ah

DC-DCConverter

IN24Vdc

OUT 12Vdc or 9Vdc

BT10BT20BT45

NEW

NEW

Usable with BT20-DUAL – BT20L – BT20-DCS – BT10 – BT15

Mod. MSB7 Output 9Vdc Autonomy 10-15 hours

Mod. MSB15 Output 9Vdc Autonomy 20-30 hours

Usable withBT20LTE – BT20 CT4 – BT45.

Mod. MKB7 Output 12Vdc Autonomy 10-15 hours

Mod. MKB15 Output 12Vdc Autonomy 20-30 hours

Option:IP65 waterproof box.

MSB-MKB

www.microset.net22

INDOOR ANTENNAS

850-960MHz 1700-2200MHz

Polarization:Plug: Impedance:Mounting: Size (mm):

4-bands GSM-UMTS-DCS-LTE Version.

FREQUENCY GAIN

GSM ANTENNA

ROOF OMNIDIRECTIONAL ANTENNAS

MP10-DUAL

MP10-4

3-BANDS GSM-DCS-UMTS PANEL ANTENNAWALL INSTALLATION

850-960MHz 1700-2200MHz

Polarizzation:

Plug:

Impedance:

Mounting:

Size:

4-bands GSM-UMTS-DCS-LTE Version.

FREQUENCY GAIN

C7

C7-LTE

MC900 GSM-DCS-UMTS ANTENNA

Polarizzation:

Plug:

Impedance:

Mounting:

Size:

MD6

3-BANDS GSM-DCS-UMTSCEILING INSTALLATION

850-960MHz

FREQUENCY GAIN850-960MHz 1700-2200MHz

FREQUENCY GAIN

10dBi 180°12dBi 160°

VERTICALTNC female50Ωon wall by clamps included L 255 x P 80 x H 145

7dBi8dBi 360°

VERTICALTNC female50Ωceiling installationL 260 x P 126 x H 130

VERTICAL

BNC female

50Ω

on mast

H 520mm, Ø 25mm

VERTICAL

N female

50Ω

on mast

H 500mm, Ø 50mm

6.5dBi 360° 6dBi 360°

NEW

NEW

Polarization:Plug: Impedance:Mounting: Size (mm):

www.microset.net 23

HIGH PERFORMANCE COLLINEAR ANTENNA

4 wayscombiner

Very rugged high gain collinear antenna for outdoor installation to havean efficient aerial system and variety of pattern direction.Recommended to increase the low level signal or to compensate theloss of long coax cables or the attenuation of kit splitter use.

• COL2 includes: two panels, splitter TNC female plug and conection set.• COL4 includes: four panels, splitter N female plug and connection set.

Each panel can be directed on different positions to expand radiation or only one direction to improve a lot gain and efficiency.High speed wind and snow resistance, operative also with very lowtemperature environmental -50°C.

Also available DCS and LTE band.

COL 2 COL 4

880-960MHz 14dBi 120° 14dBi 360°1800-2170MHz 16,5dBi 90° 21dBi 90°

Frequenct: Gain: Gain:

850-960MHz 14dBi 70°1800-2170MHz

Frequency: Gain: Coverage:

RADIATIONPATTERNHorizontal

Max coveragepattern:360°

2 wayscombiner

RADIATIONDIAGRAMHorizontal

Max coveragepattern:120°

GSM-UMTS

DUAL BANDPANEL ANTENNA

Polarizzation: VERTICALPlug: N femaleImpedance: 50ΩSize (mm): W310 x D 90 x H 365

Also available GSM-DCS band version.

MD 14

Via A. Peruch, 64 - 33077 SACILE (PN) - ItalyTel. +39 0434 72459 - Fax +39 0434 72450e-mail: info@microset.net

www.microset.net

Your local distributor:

PATENT PENDING. ALL RIGHTS RESERVED.Total or partial copy of pictures, photos, texts and design are

not allowed, only facility by written authorization from MICROSET.

Characteristics could change without notice.