Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
RENEWABLESNUOS HEAT PUMP WATER HEATERS
CF 2.0 & XP 2.5 SOLAR COLLECTORS
AQUABRAVO TWIN COIL UNVENTED CYLINDERS
Heating Hot water Renewables
2
Introduction Page 3
Air Source Heat Pump Cylinders
Operating principle of a heat pump Page 4
NUOS introduction Page 5
NUOS FS 200Features, benefits and dimensions Page 6Technical data Page 7
NUOS FS 250i Features, benefits and dimensions Page 8Technical data Page 9
Solar Thermal
Solar thermal introduction Pages 10-11
SolarComfort 2/3 Panel Flat Roof/Ground Systems Page 122/3 Panel On-Tile Kits Systems Page 13
CF2.0 Solar CollectorFeatures, benefits, dimensions and technical data Page 14
XP2.5 V Solar CollectorFeatures, benefits, dimensions and technical data Page 15
XP2.5 H Solar CollectorFeatures, benefits, dimensions and technical data Page 16
Unvented Twin Coil Cylinders
Aquabravo ITSI - Stainless Steel, Twin Coil Unvented CylindersFeatures, benefits, dimensions and technical data Page 17
Products and Accessories
Product and accessory codes Pages 18-19
CONTENTS
3
Eco-friendly home?It can be with Ariston
Ariston, a tradition that evolvesFor many years, we have entered the homes of millions offamilies who choose Ariston to improve and simplify theireveryday lives, always with the highest quality in mind.
Thanks to this interaction, Ariston has grown to become theworld’s largest manufacturer of water heaters and the 3rdlargest manufacturer of heating products in Europe.
Evidence of Ariston’s commitment to helping homeownersreduce their carbon footprint can be seen not only in becomingthe first cylinder manufacturer to obtain Energy Saving TrustRecommended status for their Classico and Aquabravoproducts but also in their renewable product offering.
Starting with their traditional Solar Thermal Collectors andTwin Coil Cylinders, Ariston offer 2 metre flat plate collectors(CF range) as well as 2.5 metre flat plate collectors (XP range),all of which are ideally suited for use with the Aquabravo ITSIrange of Unvented Twin Coil Cylinders.
As well as Solar Thermal systems, Ariston also offer theinnovative NUOS Heat Pump Cylinder which combines an airsource heat pump with an unvented cylinder.
With the NUOS from Ariston installers who hold their G3qualification can offer their customers an easy to installrenewable technology without the need for additional trainingas the refrigerant circuit is sealed, no F-Gas qualifications areneeded.
With all this in mind, it becomes clear that Ariston can offer arenewable solution for the production and storage of hot waterfor almost every application.
4
NUOS, a philosophy of energy efficiencyand total peace of mind
Working Principle1 - The refrigerant fluid crosses the evaporator and absorbs the heat from the air drawn in by the fan. This process
ensures that the refrigerant changes phase by evaporating.
2 - The compressor increases the pressure of the refrigerant gas which causes it to increase in temperature.
3 - Inside the condenser, the refrigerant gas passes its heat to the water contained inside the cylinder.This exchange process ensures that the refrigerant begins returning to its original liquid state by condensing.
4 - The refrigerant fluid loses further pressure and temperature by passing through the expansion valve, completely returning to its original state.
Inlet drawn from non-heated room (e.g. Garage, Utility Room, Basement) Exhaust ducted to outside
Inlet drawn from and exhaust also ducted to outside
5
LEGEND
1. Compressor
2. Fan
3. Evaporator
4. Hot Water Outlet
5. Cold Water Inlet
6. Electric Element (1kW +1.5kW)
7. Condenser
8. User Interface
9. Expansion Valve
1 2
3
4
5
9
7
6
8
NUOS, a philosophy of energy efficiencyand total peace of mind
FLOOR STANDING DIRECT AIR SOURCE HEAT PUMP WATER HEATER
6
NUOS
� COP 3.7 @ 20ºC (EN 255-3)� COP 2.8 (@ 7ºC (EN 255-3)� COP 2.6 (EN 16147)� ALL PLUMBING AND ELECTRICAL
CONNECTIONS WITHIN A 45° ANGLE� ENVIRONMENTALLY SOUND AND
HIGHLY EFFICIENT THERMALINSULATION
� 3 MAGNESIUM ANODES TO PROTECTAGAINST CORROSION
� BACK-UP HEATING ELEMENT� FACTORY FITTED 1/2” T&P RELIEF VALVE� ‘PLUG AND PLAY’ - NO F-GAS
QUALIFICATIONS NEEDED TO INSTALL� 5 YEAR TANK GUARANTEE (2 YEAR
GUARANTEE ON ELECTRICALCOMPONENTS)
FS 200
Dimensions
ENVIRONMENTALLYFRIENDLY
INSULATION
ENERGYSAVING
ENAMELLEDSTEEL TANK
HIGHHIGHEFFICIENCYEFFICIENCYHIGH
EFFICIENCY
7
Technical DataNUOS FS 200
DESCRIPTIONTank Rated Capacity litres 200Footprint (minimum) mm 600 x 600Weight Empty kg 90Weight Full kg 290Minimum Ceiling Height metres 1.75
CYLINDERNormal Operating Pressure bar 3.5Maximum Water Supply Pressure bar 12Hot/Cold Water Connection 3/4” BSP - 22mmHeat Loss (@ 65ºC ) kW/h in 24hr 2.06Global Warming Potential (GWP) <5Ozone Depletion Potential (ODP) 0
HEAT PUMPHeat Rating* kW 2.775Power Consumption* kW 0.75CoP in accordance with EN 255-3 (air temp. 20ºC) 3.7CoP in accordance with EN 16147 2.6Heating Time (∆T 45ºC)* mins 236Heating Energy Consumed* kW/h 2.2Maximum Water Temp (Heat Pump Only) ºC 55
REFRIGERANT FLUIDType of Fluid R134aQuantity kg 1.28Practical Limit for Room Volume** m3 5.12
ELECTRICAL DATAElectrical supply V/Hz 220-240/50Element Rating kW 1.5 + 1Protection grade of electrical system IP X4
AIRAir Flow Rate m3/h 300 - 500Available Static Pressure Loss Pa 70Sound Pressure Level @ 2m dB(A) 39Min. Temp of Room of Installation ºC 1Max. Temp of Room of Installation ºC 35Min. Volume of Room (non-ducted) m3 20Min. Air Temp Required (w.b.) @ 90% r.h. ºC -5Max. Air Temp Required (w.b.) @ 90% r.h. ºC 35
REHEAT TIME100% Capacity (Heat Pump Only) mins 23670% Capacity (Heat Pump Only) mins 181100% Capacity (Heat Pump & Element) mins 14070% Capacity (Heat Pump & Element) mins 114
Model CodeNUOS FS 200 3210041Unvented Kit 3069418Duct Kit (Inlet/Outlet) - Ø150mm / Ø200mm 3208061 / 320807190º Elbow - Ø150mm / Ø200mm 3208067 /3208075 Wall Fixing brackets (2) - Ø150mm / Ø200mm 3208068 / 3208077
AccessoriesCode Code
AIR DUCT (Ø150mm) (Ø200mm)1m Tube 3208063 32080721.5m Tube 3208064 --------2m Tube -------- 3208073Joint 3208066 320807445º Elbow 3208067 32080761m Flexible Tube 3208069 --------
* Tested in accordance with EN 16147** The practical imit is the minimum room volume the appliance should be installed in, the volume is based on quantity of refrigerant in the system. In the event of a sudden release of refrigerant then the min. room volume will make it safer for the engineer.
FLOOR STANDING INDIRECT AIR SOURCE HEAT PUMP WATER HEATER
8
NUOS
� COP 3.7 @ 20ºC (EN 255-3)� COP 2.8 (@ 7ºC (EN 255-3)� COP 2.6 (EN 16147)� ALL PLUMBING AND ELECTRICAL
CONNECTIONS WITHIN A 45° ANGLE� ENVIRONMENTALLY SOUND AND
HIGHLY EFFICIENT THERMALINSULATION
� 3 MAGNESIUM ANODES TO PROTECTAGAINST CORROSION
� BACK-UP HEATING ELEMENT� FACTORY FITTED 1/2” T&P RELIEF VALVE� INDIRECT COIL FOR USE WITH SOLAR
SYSTEMS OR GAS/OIL BOILER� ‘PLUG AND PLAY’ - NO F-GAS
QUALIFICATIONS NEEDED TO INSTALL� 5 YEAR TANK GUARANTEE (2 YEAR
GUARANTEE ON ELECTRICALCOMPONENTS)
FS 250i
Dimensions
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
ENVIRONMENTALLYFRIENDLY
INSULATION
ENERGY SAVING
ENAMELLEDSTEEL TANK
HIGHHIGHEFFICIENCYEFFICIENCYHIGH
EFFICIENCY
9
* Tested in accordance with EN 16147** The practical imit is the minimum room volume the appliance should be installed in, the volume is based on quantity of refrigerant in the system. In the event of a sudden release of refrigerant then the min. room volume will make it safer for the engineer.
AccessoriesCode Code
AIR DUCT (Ø150mm) (Ø200mm)1m Tube 3208063 32080721.5m Tube 3208064 --------2m Tube -------- 3208073Joint 3208066 320807445º Elbow 3208067 32080761m Flexible Tube 3208069 --------
Technical DataNUOS FS 250i
DESCRIPTIONTank Rated Capacity litres 250Footprint (minimum) mm 600 x 600Weight Empty kg 110Weight Full kg 360Minimum Ceiling Height metres 2
CYLINDERNormal Operating Pressure bar 3.5Maximum Water Supply Pressure bar 12Hot/Cold Water Connection 3/4” BSP - 22mmHeat Loss (@ 65ºC ) kW/h in 24hr 2.05Global Warming Potential (GWP) <5Ozone Depletion Potential (ODP) 0
HEAT PUMPHeat Rating* kW 2.775Power Consumption* kW 0.75CoP in accordance with EN 255-3 (air temp. 20ºC) 3.7CoP in accordance with EN 16147 2.8 Heating Time (∆T 45ºC)* mins 302Heating Energy Consumed* kW/h 2.7Maximum Water Temp (Heat Pump Only) ºC 55
REFRIGERANT FLUIDType of Fluid R134aQuantity kg 1.28Practical Limit for Room Volume** m3 5.12
ELECTRICAL DATAElectrical supply V/Hz 220-240/50Element Rating kW 1.5 + 1Protection grade of electrical system IP X4
AIRAir Flow Rate m3/h 300 - 500Available Static Pressure Loss Pa 70Sound Pressure Level @ 2m dB(A) 39Min. Temp of Room of Installation ºC 1Max. Temp of Room of Installation ºC 35Min. Volume of Room (non-ducted) m3 20Min. Air Temp Required (w.b.) @ 90% r.h. ºC -5Max. Air Temp Required (w.b.) @ 90% r.h. ºC 35
REHEAT TIME100% Capacity (Heat Pump Only - ∆T 45ºC) mins 30270% Capacity (Heat Pump Only - ∆T 45ºC) mins 231100% Capacity ((Heat Pump & Element - ∆T 45ºC) mins 19470% Capacity (Heat Pump & Element - ∆T 45ºC) mins 137
Model CODENUOS FS 250i 3210042Unvented Kit 3069419Duct Kit (Inlet/Outlet) - Ø150mm / Ø200mm 3208061 / 320807190º Elbow - Ø150mm / Ø200mm 3208067 /3208075 Wall Fixing brackets (2) - Ø150mm / Ø200mm 3208068 / 3208077
10
Solar Thermal.An informed choice
Solar Hot Water HeatingAriston offer all components needed for a solar thermal system: solar panels, pump station, solar controller and twincoil unvented cylinders (Aquabravo ITSI), giving a complete solar package from a single source.
The solar panels absorb the heat from the suns rays and use this to heat the heat transfer medium (a mixture of water and glycol). The fluid is circulated by a pump, the operation of which is controlled by the solar controller.
The heated fluid circulates around a heat exchanger in the hot water storage cylinder. The Ariston Aquabravo ITSI has two heat exchangers (coils). The lower coil is heated by the solar circuit and the upper coil by an auxiliary heat source(typically a gas, oil or electric system boiler).
11
Solar PanelsThe solar panels (collectors) can be mounted on either a sloping or flatroof or the ground.
The roof mounting system has been specifically designed for UK roofs. The inherently flexible fixing kit is supplied as standard with the panels. It removes the need to select and purchase additional roof fixings.
The flat roof/ground frame is easy to assemble and extremely rigid.
Whichever option is selected, you can be assured of a system which will last for many, many years.
Solar ControllerThe differential temperature solar controller is simple to install and operate, with pleasing aesthetics. It is the ‘brains’of the system and ensures effective operation and control of the pump. The illuminated digital display shows thecurrent status of the system and the current temperatures in both the solar panels and the hot water store.
The householder can easily see how the system is operating and with an optional, additional sensor see how muchenergy has been saved.
Pump StationThe pump station circulates the water/glycol fluid around the solar circuit. The pump will only operate when thereis sufficient heat in the panels to raise the temperature of the water in the cylinder. The pump will not operatewhen the cylinder is at a higher temperature than the panels, to do so would result in the cylinder being cooled.
The compact design of the pump station allows it to be easily and quickly fitted in small spaces.
12
SOLAR SYSTEMS
HIGHLY ABSORBENT
GROUND/FLATROOF
INSTALLATION
HIGHDURABILITY
CORROSIONRESISTANT
TESTEDAGAINST
HAILSTONES
2 Panel 3 PanelFlat Roof/Ground Flat/Roof Ground
Solar Collectors Qty 2 3Flat Roof/Ground Frame Qty 1 2Solar Panel Connection Kit Qty 1 1Additional Collector Connection Kit Qty 1 2Pump Station Qty 1 120 Litres Glycol Qty 1 1Solar Controller (incl. 3 sensors) Qty 1 1Expansion Vessel (25l) Qty 1 1
SOLAR THERMAL
� READY TO FIT OUT OF THE BOX
� SINGLE ROOF KIT SUITABLE FORPOPULAR TILE TYPES, INCL. SLATE
� 2 PANEL SYSTEM SUITABLE FOR USEWITH AQUABRAVO ITSI 215 & 255CYLINDERS
� 3 PANEL SYSTEM SUITABLE FOR USE WITH AQUABRAVO ITSI 255 & 305 CYLINDERS
� 10M INSULATED FLEXIBLE TWINPIPE AVAILABLE AS AN ACCESSORY
� COMPLETE PACKAGE:- SOLAR COLLECTORS- FIXING FRAMES- SOLAR CONTROLLER- PUMP STATION- EXPANSION VESSEL- FITTINGS- SOLAR FLUID
SOLAR COMFORT FLAT ROOF/GROUND
System Components
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
Maximum of 6 collectors
13
SOLAR SYSTEMS
HIGHLY ABSORBENT
ON-TILEINSTALLATION
HIGHDURABILITY
CORROSIONRESISTANT
TESTEDAGAINST
HAILSTONES
2 Panel 3 PanelOn-Tile On-Tile
Solar Collectors Qty 2 3Roof Fixing Kit Qty 1 1Solar Panel Connection Kit Qty 1 1Additional Collector Connection Kit Qty 1 2Pump Station Qty 1 120 Litres Glycol Qty 1 1Solar Controller (incl. 3 sensors) Qty 1 1Expansion Vessel (25l) Qty 1 1
SOLAR THERMAL
� READY TO FIT OUT OF THE BOX
� SINGLE ROOF KIT SUITABLE FORPOPULAR TILE TYPES, INCL. SLATE
� 2 PANEL SYSTEM SUITABLE FOR USEWITH AQUABRAVO ITSI 215 & 255 TWINCOIL CYLINDERS
� 3 PANEL SYSTEM SUITABLE FOR USE WITH AQUABRAVO ITSI 255 & 305 TWIN COIL CYLINDERS
� 10M INSULATED FLEXIBLE TWINPIPE AVAILABLE AS AN ACCESSORY
� COMPLETE PACKAGE:- SOLAR COLLECTORS- ROOF FIXING KIT- SOLAR CONTROLLER- PUMP STATION- EXPANSION VESSEL- FITTINGS- SOLAR FLUID
SOLAR COMFORT ON-TILE
System Components
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
Maximum of 6 collectors
14
SOLAR COLLECTORS
HIGHLY ABSORBENT
ROCKWOOLINSULATION
HIGHDURABILITY
CORROSIONRESISTANT
TESTEDAGAINST
HAIL STONES
SOLARKEYMARK
SOLAR COLLECTORCF 2.0
Weight when empty Kg 35.6Max. operating pressure bar 6Collector liquid capacity l 1.02Absorption % 95Reflection % 5Aperture area m^2 1.82Absorbent area m^2 1.76η0 0.74*k1 W/m2K2 3.425*k2 W/m2K2 0.008*T stagnation °C 161.6
* Data refers to the aperture area
SOLAR COLLECTORS
� TOTAL SURFACE AREA 2M2
� CAPTIVE SURFACE AREA 1.8M2
� FRAME: GREY ANODISED ALUMINIUM
� INSULATION: 50MM ROCKWOOL
� SPECIAL SOLAR GLASS – HIGHTRANSPARENCY, TEMPERED, ANTIREFLECTIVE AND PRISMATIC
� LOW MOUNTING PROFILE
� EN12975 APPROVED
� 5 YEAR GUARANTEE
� ABSORBER PLATE: HIGH GRADECOPPER WITH TINOX TITANIUMCOATING
CF 2.0
Technical data - Overall dimensions
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
15
SOLAR COLLECTORS
HIGHLY ABSORBENT
ROCKWOOLINSULATION
HIGHDURABILITY
CORROSIONRESISTANT
TESTEDAGAINST
HAIL STONES
SOLARKEYMARK
SOLAR COLLECTORXP 2.5V
Weight when empty Kg 48Max. operating pressure bar 6Collector liquid capacity l 2.1Absorption % 95Reflection % 5Aperture area m2 2.256Absorbent area m2 2.227η0 0.79*k1 W/m2K2 3.1*k2 W/m2K2 0.022*T stagnation °C 177.1
* Data refers to the aperture area
SOLAR COLLECTORS
� TOTAL SURFACE AREA 2.5M2
� APERTURE AREA 2.25M2
� FRAME: GREY ANODISED ALUMINIUM
� INSULATION: 50MM ROCKWOOL
� SPECIAL SOLAR GLASS – HIGHTRANSPARENCY, TEMPERED, ANTIREFLECTIVE AND PRISMATIC
� LOW MOUNTING PROFILE
� EN12975 APPROVED
� RAPID CONNECTION
� INTEGRATED SOLAR PROBE POCKET
� 5 YEAR GUARANTEE
� ABSORBER PLATE: HIGH GRADECOPPER WITH TINOX TITANIUMCOATING
XP 2.5V
Technical data - Overall dimensions
2241 mm2124 mm
1128 mm
61 mm 98 mm
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
16
SOLAR COLLECTORS
HIGHLY ABSORBENT
ROCKWOOLINSULATION
HIGHDURABILITY
CORROSIONRESISTANT
TESTEDAGAINST
HAIL STONES
SOLARKEYMARK
SOLAR COLLECTORXP 2.5H
Weight when empty Kg 48Working pressure bar 6Collector liquid capacity l 2.5Absorption % 95Reflection % 5Aperture area m2 2.26Absorbent area m2 2.23η0 0.79*k1 W/m2K 2.27*k2 W/m2K2 0.032*T stagnation °C 171.9
* Data refers to the aperture area
SOLAR COLLECTORS
� TOTAL SURFACE AREA 2.5M2
� APERTURE AREA 2.25M2
� FRAME: GREY ANODISED ALUMINIUM
� INSULATION: 50MM ROCKWOOL
� SPECIAL SOLAR GLASS – HIGHTRANSPARENCY, TEMPERED, ANTIREFLECTIVE AND PRISMATIC
� LOW MOUNTING PROFILE
� EN12975 APPROVED
� RAPID CONNECTION
� INTEGRATED SOLAR PROBE POCKET
� 5 YEAR GUARANTEE
� ABSORBER PLATE: HIGH GRADECOPPER WITH TINOX TITANIUMCOATING
XP 2.5H
Technical data - Overall dimensions
2241 mm
1128 mm
61 mm
98 mm
1010 mm
5 5 yearguarantee
2 2 yearguarantee
25 25 yearguarantee
10 10 yearguarantee
17
HIGH EFFICIENCY FLOOR STANDING TWIN COILUNVENTED CYLINDERS
AQUABRAVO
� QUALITY STAINLESS STEEL TANK,12 BAR PRESSURE TESTED
� ENVIRONMENTALLY SOUND AND HIGHLYEFFICIENT THERMAL INSULATION
� ALL PLUMBING AND ELECTRICALCONNECTIONS WITHIN A 60° ANGLE
� TWIN INDIRECT COILS FOR DUAL HEATSOURCE APPLICATIONS
� CYLINDER THERMOSTATS WITH EXTERNALREGULATION
� UNIQUE COIL DESIGN ALLOWS FULLQUANTITY OF WATER TO BE HEATED
� FACTORY FITTED 1/2” T&P RELIEF VALVE� UNVENTED CONTROL KIT SUPPLIED WITH
CYLINDER� SIMPLE INSTALLATION� 25 YEAR TANK GUARANTEE (2 YEAR
GUARANTEE ON ELECTRICALCOMPONENTS)
ENVIRONMENTALLYFRIENDLY
INSULATION
STAINLESSSTEEL TANK
TEMPERATUREREGULATION
ITSI 215, 255, 305
Technical data - Overall dimensions
* Based on single heating element 100% capacity** Based on single heating element 70% capacity
Model ITSI 215 ITSI 255 ITSI 305Product Code 3826500 3826501 3826502
Nominal capacity l 215 255 305Weight empty kg 55 60 65Weight full kg 270 315 370Heat Exchanger performance (top) kW 20.0 20.0 20.0Heat Exchanger performance (bottom) kW 27.0 27.0 27.0Coil surface area (top) m2 0.75 0.75 0.75Coil surface area (bottom) m2 1.1 1.1 1.1Indirect reheat time* (∆T= 45°C) min. 24 29 34Indirect reheat time** (∆T= 45°C) min. 17 20 24Voltage V 240 240 240Power kW 3 3 3Max. temperature. °C 70 70 70
ITSI 215 ITSI 255 ITSI 305
a mm 1462 1753 2029
b mm 213 213 213
c mm 268 268 268
d mm 580 580 580
e mm 263 263 263
f mm 346 346 346
g mm 711 711 711
h mm 531 531 531
i mm 1116 1029 1167
18
NUOS Air Source Heat Pump Cylinders
NUOS 200d 3210041200 litre, Direct, Floor standing unvented heat pump cylinder (Requires 3069418)
NUOS 250i 3210042250 litre, Indirect, Floor standing unvented heat pump cylinder (Requires: 3069419)
NUOS Accessories
Unvented Kit (NUOS 200d) 3069418
Unvented Kit (NUOS250i) 3069419
Duct Kit (Inlet/Outlet) - ø150mm 3208061The kit consists of flexible grate with springs, two rigid pipes (1m and 1,5m) and a connector
90º Elbow - ø150mm 3208067
1 m Tube - ø150mm 3208063
1.5 m Tube - ø150mm 3208064
Flexible Joint - ø150mm 3208066
1 m Flexible Tube - ø150mm 3208069
Fixing Bracket (x2) - ø150mm 3208068
Duct Kit (Inlet/Outlet) - ø200mm 3208071The kit consists of flexible grate with springs, two rigid pipes (1m and 2m) and a connector
45º Elbow - ø200mm 3208076
90º Elbow - ø200mm 3208075
1 m Tube - ø200mm 3208072
2 m Tube - ø200mm 3208073
Joint - ø200mm 3208074
Fixing Bracket (x2) - ø200mm 3208077
Flexible grate w/springs - ø200mm 3208078
NUOS Air Source Heat Pump Water Heaters & Accessories
Description Product Code
Solar Comfort Systems
Solar Comfort 2 Panel On-Tile System 3023217Includes: CF2.0 Solar Collectors x2 Roof Fixing Kit x1, Pump Station x1, 20 Litres Solar Fluid x1, Solar Controller (incl. 3 sensors) x1, Expansion Vessell (25l) x1, Single Panel Connection Kit x1, Additional Collector Connection Kit x1
Solar Comfort 3 Panel On-Tile System 3023218Includes: CF2.0 Solar Collectors x3 Roof Fixing Kit x1, Pump Station x1, 20 Litres Solar Fluid x1, Solar Controller (incl. 3 sensors) x1, Expansion Vessell (25l) x1, Single Panel Connection Kit x1, Additional Collector Connection Kit x2
Solar Comfort 2 Panel Flat Roof / Ground 3023219Includes: CF2.0 Solar Collectors x2 Flat Roof/Ground Frame x1, Pump Station x1, 20 Litres Solar Fluid x1, Solar Controller (incl. 3 sensors) x1, Expansion Vessell (25l) x1, Single Panel Connection Kit x1, Additional Collector Connection Kit x1
Solar Comfort 3 Panel On-Tile System 3023220Includes: CF2.0 Solar Collectors x3 Flat Roof/Ground Frame x2, Pump Station x1, 20 Litres Solar Fluid x1, Solar Controller (incl. 3 sensors) x1, Expansion Vessell (25l) x1, Single Panel Connection Kit x1, Additional Collector Connection Kit x2
Solar Systems
Description Product Code
19
CF2.0 Solar Panels & Fixing Kits
CF2.0 Solar Collector 3020008
Connection Kit - 1 Collector (incl. Air Vent) 3024017
Connection Kit - Additional Collector 3024018
On-Tile Rail Kit - 2 Collectors 3107024
On-Tile Rail Kit - 3 Collectors 3107025
Ground/Flat Roof Frame - 1 Collector 3024103
XP 2.5 Solar Panels & Fixing Kits
XP 2.5 V Solar Collector 3020027
XP 2.5 H Solar Collector 3020028
Connection Kit - Single Collector (XP 2.5 V/H) 3024093
Air Vent (XP 2.5 V/H) 3024098
Connection Kit - Additional Collector (XP 2.5 V/H) 3024094
Ground/Flat Roof Frame - 1 Collector (XP 2.5 V) 3024103
Ground/Flat Roof Frame - 1 Collector (XP 2.5 H) 3024105
Solar Thermal Accessories
Solar Pump Station 3024056
Solar Controller & Probes 3104047
Expansion Vessel & Bracket (25l) 4448666451
Glycol (20l) 3820001
Insulated Flexible Twin Pipe - 10m 3024069
Solar Thermal Components & Accessories
Description Product Code
Stainless Steel Twin Coil Unvented Cylinders
Aquabravo ITSI 215 3826500215 litre, Stainless Steel, Unvented Twin Coil Cylinder c/w Unvented control kit
Aquabravo ITSI 255 3826501255 litre, Stainless Steel, Unvented Twin Coil Cylinder c/w Unvented control kit
Aquabravo ITSI 305 3826502305 litre, Stainless Steel, Unvented Twin Coil Cylinder c/w Unvented control kit
Twin Coil Cylinders
Description Product Code
In th
e in
tere
sts
of o
ur c
usto
mer
s, A
risto
n Th
erm
o U
K Lt
d is
con
tinua
lly d
evel
opin
g th
ese
prod
ucts
to im
prov
e bo
th p
erfo
rman
ce a
nd d
esig
n. W
e th
eref
ore
rese
rve
the
right
to c
hang
e sp
ecifi
catio
n w
ithou
t prio
r no
tice.
Thi
s br
ochu
re is
acc
urat
e at
the
date
of p
rintin
g. C
onsu
mer
sta
tuto
ry r
ight
s ar
e no
t affe
cted
.WA 120 LGB -August ‘12-
Pri
nted
by
Vari
o P
ress
Ariston Thermo UK LtdAriston BuildingHughenden AvenueHigh WycombeBucks HP13 5FT
Fax 01494 459775
Technical Advice & Customer ServiceFax 01494 [email protected]@[email protected]
www.ariston.co.uk
Follow us on Facebook & Twitter