1
www.protectitinc.com Product Tech Sheet Remove-It “Water Spots” Directions Description Part # 342 Protect-It Car Care’s Remove-It “Water Spots” was designed to easily remove water spots and mineral deposits from your paint, chrome and glass. Features micro-polish technology; Cleans and protects all in one step. Protect-It Car Care’s Remove-It “Water Spots” is ready to use, simply apply Remove-It “Water Spots” direct to the surface then gently agitate the surface with a soft and clean microfiber towel. Complete a second pass with a little more pressure and product to remove deeper etchings. Rinse clean with cool water. Caution: Apply product to cool surfaces only. Always test the surface to be cleaned in an inconspicuous area to determine if the surface is sensitive and to calculate proper length of time product should be on the surface to avoid any damages. Do not use product on pitted or chipped windshield. Do not allow product to come into contact with raw metals such as aluminum and also keep away from silver reflective coatings. Always wear gloves and goggles when using this product and avoid contact with clothing. Calcium Build Up Remover First Aid Eyes: If this product comes in contact with the eyes it can cause severe irritation and/or tissue damage. If product comes in contact with eyes flush eyes with warm after for 30 minutes and contact a physician immediately. Skin: If this product comes in contact with skin it can cause severe irritation and/or tissue damage. If product contact skin; flush exposed area with cool water for 30 minutes, then soak in an iced solution of Benzalkonium Chloride and contact a physician immediately. Ingestion: When concentrated solutions of this product are swallowed; severe damage to the mouth esophagus, and stomach will occur. DO NOT INDUCE VOMITING. Have patient drink large amounts of milk, water chalk mixture, or plain water. Get immediate medical attention. Heath Hazard Flammability Hazard Reactivity Hazard Personal Protection 3 0 0 n + p Available Sizes • 1 Gallon (3.79 L) - Part # 34201 • 5 Gallons (18.9 L) - Part # 34205 inc. inc.

Remove-It “Water Spots” Part # 342 Description Product ...protectitinc.com/wp-content/uploads/2013/08/... · Remove-It “Water Spots” Directions Part # 342 Description Protect-It

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Remove-It “Water Spots” Part # 342 Description Product ...protectitinc.com/wp-content/uploads/2013/08/... · Remove-It “Water Spots” Directions Part # 342 Description Protect-It

www.protectitinc.com

Pro

duct

Tec

h S

heet

Remove-It “Water Spots”

Directions

DescriptionPart # 342

Protect-It Car Care’s Remove-It “Water Spots” was designed to easily remove water spots and mineral deposits from your paint, chrome and glass. Features micro-polish technology; Cleans and protects all in one step.

Protect-It Car Care’s Remove-It “Water Spots” is ready to use, simply apply Remove-It “Water Spots” direct to the surface then gently agitate the surface with a soft and clean microfiber towel. Complete a second pass with a little more pressure and product to remove deeper etchings. Rinse clean with cool water.Caution: Apply product to cool surfaces only. Always test the surface to be cleaned in an inconspicuous area to determine if the surface is sensitive and to calculate proper length of time product should be on the surface to avoid any damages. Do not use product on pitted or chipped windshield. Do not allow product to come into contact with raw metals such as aluminum and also keep away from silver reflective coatings. Always wear gloves and goggles when using this product and avoid contact with clothing.

Calcium Build Up Remover

First AidEyes: If this product comes in contact with the eyes it can cause severe irritation and/or tissue damage. If product comes in contact with eyes flush eyes with warm after for 30 minutes and contact a physician immediately.Skin: If this product comes in contact with skin it can cause severe irritation and/or tissue damage. If product contact skin; flush exposed area with cool water for 30 minutes, then soak in an iced solution of Benzalkonium Chloride and contact a physician immediately.Ingestion: When concentrated solutions of this product are swallowed; severe damage to the mouth esophagus, and stomach will occur. DO NOT INDUCE VOMITING. Have patient drink large amounts of milk, water chalk mixture, or plain water. Get immediate medical attention.

Heath HazardFlammability Hazard

Reactivity HazardPersonal Protection

30

0n + p

Available Sizes• 1 Gallon (3.79 L) - Part # 34201 • 5 Gallons (18.9 L) - Part # 34205

inc.

inc.