Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Model No. AK-HRP200G
Operating Instructions<Operations and Settings>
Remote Operation Panel
VQT4S52A (E)
z How the operating instructions are organized• Basics:
This manual describes how to connect the unit to the required equipment and set it up.Before installing the unit, be sure to read the <Basics> manual to ensure that you know how to install it correctly.
• Operations and Settings (this manual)Operations and Settings describe how to operate and set up the unit.
M1012KT0 -PS
ENGLISH
Before operating this product, please read the instructions carefully and save this manual for future use.
2 3
Contents
Introduction............................................................................................. 3
Setup.mode............................................................................................. 4Setup mode.......................................................................................... 4
Setup.Mode.Operations......................................................................... 71. Set camera number ......................................................................... 72. Save scene file to/load scene file from memory card ...................... 73 Saving user files to/loading user files from memory card ................. 84 Save lens file to/load lens file from memory card ............................. 95 Save ROP configuration file to/load ROP configuration file from
memory card .................................................................................... 96 Format memory card....................................................................... 107 Select/set flare and pedestal........................................................... 108. Set buzzer (beep/call tone) ............................................................ 119 Display brightness setting (LED/7-segment display) ...................... 1116 Initialize settings............................................................................ 1117 Confirm version ............................................................................. 1218 Save unit data to memory card ..................................................... 1219 Software upgrade.......................................................................... 12Error messages in setup mode .......................................................... 13
ROP.menu.operations.......................................................................... 14ROP menus that can be operated on the unit.................................... 14Operating ROP menus....................................................................... 14
ROP.menu.setting................................................................................ 16SHADING(WHITE) ............................................................................. 16PEDESTAL/FLARE/GAIN .................................................................. 16GAMMA/BLACK.GAMMA .................................................................. 17CINEMA GAMMA .............................................................................. 17KNEE/WHITE CLIP ............................................................................ 18MATRIX (1/2) ..................................................................................... 18MATRIX (2/2) ..................................................................................... 19HD DTL/SKIN DTL (1/2) .................................................................... 19HD DTL/SKIN DTL (2/2) .................................................................... 20SD DETAIL ........................................................................................ 20SYSTEM (1/2) .................................................................................... 21SYSTEM (2/2) .................................................................................... 22FUNCTION ........................................................................................ 22LENS FILE/EDIT (1/2) ....................................................................... 23LENS FILE/EDIT (2/2) ....................................................................... 23
Data.handled.in.the.studio.camera.system....................................... 24
Data.item.list......................................................................................... 25
Index...................................................................................................... 36
��About.trademarks.and.registered.trademarks.• SDHC logo is a trademark of SD-3C, LLC.• Other company names and product names appearing in this manual are the registered trademarks or trademarks of their respective companies.
��CopyrightsIt is prohibited to transfer, copy, disassemble, decompile, and reverse engineer the software included with the unit, as well as export it in violation of the export laws.
��AbbreviationsThe following abbreviations are used in this manual.• SD memory cards and SDHC memory cards are both referred to as “memory cards”. They are referred to individually in descriptions in which each
of them is discussed separately.• Personal computers are referred to as "computers."• Studio handy camera is referred to as “camera”.• Camera control unit is referred to as "CCU".• Remote operation panel is referred to as “ROP”.
�� Illustrations.and.screen.images.in.this.manual• Illustrations of the unit and screens may appear different from the actual unit and screens.
2 3
Introduction
��OverviewThis unit is a remote operation panel for controlling a studio handy camera (AK-HC3800) and a camera controller unit like the AK-HCU200.Use a dedicated optical fiber cable to connect a studio handy camera to a camera controller unit and use a dedicated ROP cable (optional accessory) to connect this unit to the camera controller unit.
��Memory.CardsMemory cards used with the unit should conform to SD or SDHC standards.Be sure to use the unit to format memory cards.Memory cards with the following capacity can be used with the unit.SDXC memory cards are not supported.
SD memory cards: 8 MB to 2 GBSDHC memory cards: 4 GB to 32 GB
For the latest information not described in the Operating Instructions, refer to the following website.
http://pro-av.panasonic.net/
Observe the following points when using and storing this unit.• Avoid high temperature and humidity.• Avoid water droplets.• Avoid static electricity.
��Upgrade.softwareYou can obtain upgrade software from Service and Support on the following website.
http://panasonic.biz/sav/
For the upgrade procedure, refer to the instructions included with the download file.
��Software.for.peripheral.equipmentSoftware upgrades will also become necessary for the peripheral equipment that is connected to this unit (cameras or CCUs).For details, consult your supplier.
��Disclaimer.of.warrantyIN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
(6) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE;
��File.types.handled.by.the.unitScene file Scene files are mainly used by video
engineers (VE) to create the required image characteristics.
Reference file The term reference file is a generic term for user files and factory files.
User file A user file is system setting data (reference file) composed of scene files and operation data. The user can record user files.
Factory file A file that contains camera settings that were stored at the factory.
Lens file Data for correcting specific lens characteristics that are used by video engineers (VE).
ROP configuration file ROP specific setting data.
4 5
Setup.mode
Setup.modeSetup mode allows the user to make a variety of unit settings, and save and load scene files and user files.Normal operation is unavailable during setup mode operation. ROP menu (REMOTE OPERATION MENU) operation is not available either.
��Setup.mode.functionsSetup mode allows you to do any of the following.
Item Adjustable.range Display1 Set camera number Sets a camera number.
2 Save scene file to/load scene file from memory card Saves the currently used scene file to a memory card. It also allows you to load a scene file stored on a memory card.
3 Save user file to/load user file from memory card Saves the currently used user file to a memory card. It also allows you to load a user file stored on a memory card.
4 Save lens file to/load lens file from memory card Saves the currently used lens file to a memory card. It also allows you to load a lens file stored on a memory card.
5 Save ROP configuration file to/load ROP configuration file from memory card
Save a configuration file for the unit to a memory card. It also allows you to load a configuration file for the unit stored on a memory card.
6 Format memory card Formats a memory card
7 Select/set flare and pedestal Selects the flare and pedestal control function
8 Set buzzer (beep/call tone) Enables or disables the buzzer or call tone.
9 Set display brightness (LED/7-segment display) Sets the brightness of the panel LED and 7-segment display.
10
For future use.
11
12
13
14
15
16 Initialize settings Initializes unit settings.
17 Confirm version Displays the version of the software used by the unit.
18 Save unit data to memory card Saves unit data to a memory card.
19 Upgrade software Upgrades the software used by the unit.
4 5
Setup.mode. (continued)
��Opening.setup.modeSetup mode differs from normal operating modes. Use the steps below to open setup mode.
1..When.a.camera.and.CCU.are.connected,.select.IRIS.(to.light.the.<IRIS>.display.on.the.panel).If the IRIS display is not lit, press the selected <DISPLAY SELECT> button to select IRIS.
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
IRIS display
Use the steps below to open setup mode when the power is on, but a camera or CCU is not connected.
2..Simultaneously.hold.down.DATA.SET.<DATA.SET>.<UP>,.<DOWN>.and.<SHIFT>.for.approximately.two.seconds.This opens setup mode and Menu No. 1 (camera number setting) is displayed.
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
SCENE 4 STORESCENE 3SCENE 2SCENE/USER FILE
SCENE 1
USER 3USER 2USER 1
SHIFT
��Exiting.setup.modeTo exit setup mode, hold down <EXIT> for two seconds. The unit returns to normal operating mode.
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
��Basic.operationsThe buttons indicated in the figure below are available in setup mode. No other buttons are available. All other LEDs stay off. (Except the alarm display)
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
1
567 8
2 43
1..Selects.set.values
2..Indicates.selected.submenu
3..Indicates.set.values.and.selected.values
4..Indicates.menu.numbers
5..Selects.a.menu.number..Each.press.of.the.button.increments.menu.numbers.1→2→3→...→19→1→2→...
6..Confirms.a.setting
7..Selects.a.submenu..Each.press.of.the.button.opens.a.different.submenu.
8..To.exit.setup.mode,.hold.down.<EXIT>.for.two.seconds..The.unit.returns.to.normal.operating.mode.
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
6
Setup.mode. (continued)
7
��Setup.mode.menu.configurationSetup mode is comprised of the menus and submenus listed in the table below.
Menu Submenu Set.value/Selected.operation Default.value
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Press <SELECT>to select a menu number. Press <SAVE/LOAD> to select a submenu. Use <UP> or <DOWN> to select a set value or an operation.Use <EXECUTE> to confirm an entry.
No. Menu.item Light.indication
Settings.and.operations 7-segment.display.(display.and.selection)
1 Set camera number*1 - - Camera number (1 to 19) 1
2 Save scene file to/load scene file from memory card
ND Save to memory card Scene files (1 to 4) 1
CC Load from memory card Scene files (1 to 4) 1
3 Save user file to/load user file from memory card
ND Save to memory card User files (1 to 3) 1
CC Load from memory card User files (1 to 3) 1
4 Save lens file to/load lens file from memory card
ND Save to memory card Lens files (1 to 32) 1
CC Load from memory card Lens files (1 to 32) 1
5 Save ROP configuration file to/load ROP configuration file from memory card
ND Save to memory card - -
CC Load from memory card - -
6 Format memory card*1 - - - -
7 Select/set flare and pedestal*1 - - FLARE/PED (FL/PE) FL
8 Set buzzer (beep/Call)*1 - - Enable/disable buzzer (on/off) on
9 Set display brightness (LED/7-segment display)
ND LED 3 levels (bright/intermediate/low) Bright
CC 7-segment display 3 levels (bright/intermediate/low) Bright
10
For future use.
11
12
13
14
15
16 Initialize settings - - - -
17 Confirm version ND Display version No (first digits) Displays the first 3 digits -
CC Version No (middle digits) Displays the middle 2 digits -
SHT Version No (last digits) Displays the last 3 digits -
18 Save unit data to memory card - - - -
19 Upgrade software - - - -
*1 These functions are controlled by Save ROP configuration file to/load ROP configuration file from memory card These functions are initialized when you perform settings initialization.
��Files.stored.on.a.memory.cardIn setup mode, the following files are saved to or loaded from a memory card by the unit. The fixed file names assigned by the unit must not be changed on a computer. If the file names are changed, they can no longer be processed by the unit.
Files.stored.on.a.memory.card FilenameScene file SCENE1.BIN to SCENE4.BIN
User file USER1.BIN to USER3.BIN
Lens file LENS01.BIN to LENS32.BIN
ROP configuration file ROP_OPE.BIN
Unit data file ROP_INFO.BIN
6 7
Setup.Mode.Operations
<Note>Menu numbers 10 to 15 are for future use.
1..Set.camera.number
1..Open.setup.mode.and.check.that.menu.number.[1].is.displayed..If.a.menu.number.other.than.[1].appears,.press.<SELECT>.to.select.menu.number.[1].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirm the camera number
Press to select the camera number
2..Press.<UP>.or.<DOWN>.to.select.a.camera.number.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To select camera number 2
• Camera numbers become available after exiting setup mode.• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
2..Save.scene.file.to/load.scene.file.from.memory.cardCurrent operating status data is saved as a scene file to the memory card.
Press.<SELECT>to.select.menu.number.[2].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
ND CC
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirm
Select file number, Select y (Select)/n (Cancel)
Press to save/load
Save file indicationLoad file indication
2-1.Save.scene.file.to.memory.card1..Press.<SAVE/LOAD>.to.select.[ND].
• Each press of <SAVE/LOAD> toggles between [ND] (Save) and [CC] (load).
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To save a file to file no. 2 on the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel saving, select [n] and press <EXECUTE>.• The file is saved to the memory card and [Fin] appears when saving
ends.• [E02] is displayed if the save operation to the memory card fails.
(→page 13) If this happens, check the memory card and try again or insert another memory card to perform the operation again.
• [E01] is displayed when a scene file with the same name as the one you are attempting to save already exists on the memory card. To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
2-2.Load.scene.file.from.memory.cardScene file data loaded from the memory card is returned to the operating status. (It is not returned to scene files 1 to 4. To return the data to scene files 1 to 4, exit setup mode and store the data in one of scene files 1 to 4. For details, refer to <Operations>, the instruction manual.)
1..Press.<SAVE/LOAD>.to.select.[CC].• Each press of <SAVE/LOAD> toggles between [ND] (Save) and
[CC] (load).ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNCCC
To load file no. 2 from the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
8
Setup.Mode.Operations. (continued)
9
• To cancel loading, select [n] and press <EXECUTE>.• The file is loaded from the memory card and [Fin] appears when
loading ends.• [E02] is displayed if the load operation from the memory card fails.
(→page 13)If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
3.Saving.user.files.to/loading.user.files.from.memory.card
Press.<SELECT>to.select.menu.number.[3].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select file number, Select y (Select)/n (Cancel)
Save file indicationLoad file indication
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirmPress to save/load
3-1.Save.user.file.to.memory.cardCurrent operating status data is saved as a user file to the memory card.
1..Press.<SAVE/LOAD>.to.select.[ND].• Each press of <SAVE/LOAD> toggles between [ND] (Save) and
[CC] (load).ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To save a file to file no. 2 on the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel saving, select [n] and press <EXECUTE>.• The file is saved to the memory card and [Fin] appears when saving
ends.• [E02] is displayed if the save operation to the memory card fails.
(→page 13) If this happens, check the memory card and try again or insert another memory card to perform the operation again.
• [E01] is displayed when a user file with the same name as the one you are attempting to save already exists on the memory card.To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
3-2.Load.scene.file.from.memory.cardUser file data loaded from the memory card is returned to the operating status. (It is not returned to user files 1 to 3. To return the data to user files 1 to 3, exit setup mode and store the data in one of user files 1 to 3. For details, refer to <Operations>, the instruction manual.)
1..Press.<SAVE/LOAD>.to.select.[CC].• Each press of <SAVE/LOAD> toggles between [ND] (Save) and
[CC] (load).ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To load file no. 2 from the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel loading, select [n] and press <EXECUTE>.• The file is loaded from the memory card and [Fin] appears when
loading ends.• [E02] is displayed if the load operation from the memory card fails.
(→page 13)If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
8 9
Setup.Mode.Operations. (continued)
4.Save.lens.file.to/load.lens.file.from.memory.card
Press.<SELECT>to.select.menu.number.[4].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select file number, Select y (Select)/n (Cancel)
Save file indicationLoad file indication
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirmPress to save/load
4-1.Save.lens.file.to.memory.card1..Press.<SAVE/LOAD>.to.select.[ND].
• Each press of <SAVE/LOAD> toggles between [ND] (Save) and [CC] (load).
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To save a file to file no. 2 on the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel saving, select [n] and press <EXECUTE>.• The file is saved to the memory card and [Fin] appears when saving
ends.• [E02] is displayed if the save operation to the memory card fails.
(→page 13)If this happens, check the memory card and try again or insert another memory card to perform the operation again.
• [E01] is displayed when a lens file with the same name as the one you are attempting to save already exists on the memory card.To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)
• [E04] is displayed when the lens file is off.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
4-2.Load.lens.file.from.memory.card1..Press.<SAVE/LOAD>.to.select.[CC].
• Each press of <SAVE/LOAD> toggles it between [ND] (Save) and [CC] (Load).
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.a.file.number.on.the.memory.card.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
To load file no. 2 from the memory card
3..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel loading, select [n] and press <EXECUTE>.• The file is loaded from the memory card and [Fin] appears when
loading ends.• [E02] is displayed if the load operation from the memory card fails.
(→page 13)If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1.
• [E04] is displayed when the lens file is off.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
5..Save.ROP.configuration.file.to/load.ROP.configuration.file.from.memory.card
Press.<SELECT>to.select.menu.number.[5].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select y (Select)/ n (Cancel)
Save file indicationLoad file indication
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirmPress to save/load
10
Setup.Mode.Operations. (continued)
11
5-1.Save.ROP.configuration.file.to.memory.card1..Press.<SAVE/LOAD>.to.select.[ND].
• Each press of <SAVE/LOAD> toggles between [ND] (Save) and [CC] (load).
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel saving, select [n] and press <EXECUTE>.• The file is saved to the memory card and [Fin] appears when saving
ends.• [E02] is displayed if the save operation to the memory card fails.
(→page 13)If this happens, check the memory card and try again or insert another memory card to perform the operation again.
• [E01] is displayed when an ROP configuration file with the same name as the one you are attempting to save already exists on the memory card.To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)
• For details on Save/Load data, refer to page 6.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
5-2.Load.ROP.configuration.file.from.memory.card1..Press.<SAVE/LOAD>.to.select.[CC].
• Each press of <SAVE/LOAD> toggles between [ND] (Save) and [CC] (load).
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• The file is loaded from the memory card and [Fin] appears when
loading ends. A few seconds later, the unit is restarted.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel loading, select [n] and press <EXECUTE>.• [E02] is displayed if the load operation from the memory card fails.
(→page 13)If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1.
• To exit setup mode, hold down <EXIT> for about 2 seconds.
6.Format.memory.card
1..Press.<SELECT>to.select.menu.number.[6].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select y (Format)/n (Cancel)
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirm
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Card formatting starts.• Do not remove a memory card that is being accessed.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel formatting, select [n] and press <EXECUTE>.• When the formatting ends, [Fin] appears.
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
7.Select/set.flare.and.pedestal
Press.<SELECT>to.select.menu.number.[7].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select FL (Flare)/PE (Pedestal)
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirm
7-1.Set.flarePress.<UP>.or.<DOWN>.to.select.[FL].and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
10 11
Setup.Mode.Operations. (continued)
7-2.Set.pedestalPress.<UP>.or.<DOWN>.to.select.[PE].and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
8..Set.buzzer.(beep/call.tone)
1..Press.<SELECT>to.select.menu.number.[8].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select on/off
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirm
2..Press.<UP>.or.<DOWN>.to.select.[on].and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
9.Display.brightness.setting.(LED/7-segment.display)
Press.<SELECT>to.select.menu.number.[9].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Adjust brightnessLED display brightness
7-segment display brightness
Press to select the menu number
Press to exit setup mode (hold down)
Press to confirmLED/7-segment display switch
9-1.Set.LED.brightness1..Press.<SAVE/LOAD>.to.select.[ND].and.press.<EXECUTE>.to.confirm.the.selection.• Each press of <SAVE/LOAD> toggles between [ND] (LED display
brightness) and [CC] (7-segment display brightness).ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.LED.display.brightness.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
9-2.Set.7-segment.display.brightness1..Press.<SAVE/LOAD>.to.select.[CC].and.press.<EXECUTE>.to.confirm.the.selection.• Each press of <SAVE/LOAD> toggles between [ND] (LED display
brightness) and [CC] (7-segment display brightness).ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
2..Press.<UP>.or.<DOWN>.to.select.7-segment.display.brightness.and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
Menu.numbers.10.to.15.are.for.future.use.
16.Initialize.settings
<Note>When settings are initialized, the unit is automatically restarted.For details on what settings are initialized, refer to page 6
1..Press.<SELECT>to.select.menu.number.[16].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Press to select the menu number
Press to confirm
Select y (Initialize)/n (Cancel)
12
Setup.Mode.Operations. (continued)
13
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• After confirmation, unit settings are initialized and it is automatically
restarted.ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• To cancel initializing, select [n] and press <EXECUTE>.
17.Confirm.version
Press.<SELECT>to.select.menu.number.[17].• The version information is displayed.• Press <SAVE/LOAD> to show the 8-digit version number split up in 3,
2 and 3 digits.
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Press to select the menu numberPress to switch display digits
Display digit indication (first 3 digits)Display digit indication (middle 2 digit)Display digit indication (last 3 digits)
Press to exit setup mode (hold down)
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
18.Save.unit.data.to.memory.cardThis functions are used by the manufacturer during maintenance.
1..Press.<SELECT>to.select.menu.number.[18].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Press to select the menu number
Press to confirm
Select y (Save)/n (Cancel)
Press to exit setup mode (hold down)
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• The file is saved to the memory card and [Fin] appears when saving ends.
• [E02] is displayed if the save operation to the memory card fails.(→page 13)If this happens, check the memory card and try again or insert another memory card to perform the operation again.
• [E01] is displayed when a unit data file with the same name as the one you are attempting to save already exists on the memory card.To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>. (→page 13)
• To exit setup mode, hold down <EXIT> for about 2 seconds.• To make other settings, press <SELECT> to select a menu number.
19.Software.upgradeFor details on software upgrades, refer to "Software upgrades"(→page 3).
1..Press.<SELECT>to.select.menu.number.[19].
CAMERA
No.
DATASET
DISPLAY SELECT
UP
DOWN
SET UP ND/CC M.GAIN/M.PED SHUTTER
ND
M.GAIN
IRIS
M.PED 10-19
CC SHT SYNC
SELECT
EXECUTEEXITSAVE/LOAD
SHIFT+
UP+DOWN
Select y (Upgrade)
Press to select the menu number
Press to confirm
Press to exit setup mode (hold down)
2..Press.<UP>.or.<DOWN>.to.select.[y].and.press.<EXECUTE>.to.confirm.the.selection.• Upgrading starts.
ND
M.GAIN
IRIS
M.PED
CC SHT SYNC
• When the upgrade ends, [Fin] appears.
<Note>If the upgrade fails for some reason, <SHIFT> may start to flash after the restart. If this happens, perform the upgrade process again.
12 13
Setup.Mode.Operations. (continued)
Error.messages.in.setup.mode
Error.No. Error.dataE01 A file with the same name already exists. Select [y]
to overwrite.
E02 An error occurred on the memory card.• Check if a file with the same name already exists.• Check if the memory card is write protected.• Check if there is any free space left on the P2 card.
E03 A memory card has not been inserted.• The lens file is off.
E04 A communication error occurred. Check the connected equipment.
E05 An error occurred. Start over from the beginning.
��When.a.file.with.the.same.name.exists.on.the.memory.card[E01] is displayed when a file with the same name as the one you are attempting to save already exists on the memory card.To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.
��When.E02.to.E05.are.displayedPress <EXECUTE> to close the error message. Then perform the operation again.
14 15
ROP.menu.operations
ROP.menus.that.can.be.operated.on.the.unitThe unit can access the picture monitor on a CCU to control the ROP menu (REMOTE OPERATION MENU).
��Opening.menus.and.menu.configuration
CHARA
MENU
SELECT
REMOTE OPERATION MENU
SHADING(WHITE)
PEDESTAL/FLARE/GAIN
GAMMA/BLACK GAMMA
CINEMA GAMMA
KNEE/WHITE CLIP
MATRIX
HD DTL/SKIN DTL
SD DETAIL
SYSTEM
FUNCTION
LENS FILE/EDIT
Hold down <CHARA/MENU> for about 2 seconds to open [REMOTE OPERATION MENU]. To close [REMOTE OPERATION MENU], hold down <CHARA/MENU> for about 2 seconds.
Use <SELECT> to select the menu.
Menus cannot be displayed when any of the following messages appear on the picture monitor.• WARNING message• AUTO message• STATUS messageIf any of these messages appear, you can hold down <CHARA/MENU> to delete them and resume operation.
When camera power <HEAD POWER> is Off, only [SYSTEM] can be selected.
Operating.ROP.menus
��Basic.menu.operations
1..Hold.down.<CHARA/MENU>.for.2.seconds.The [REMOTE OPERATION MENU] appears. (The cursor appears at the beginning of the first line.)
CHARA
MENU
SELECT
→* REMOTE OPERATION MENU *
SHADING(WHITE )PEDESTAL/FLARE/GAINGAMMA/BLACK GAMMACINEMA GAMMAKNEE/WHITE CLIPMATRIXHD DTL/SKIN DTLSD DETAILSYSTEMFUNCTIONLENS FILE/EDIT
Cursor
2..Turn.<SELECT>.one.click.clockwise.to.move.the.cursor..
CHARA
MENU
SELECT
→
* REMOTE OPERATION MENU *
SHADING(WHITE )PEDESTAL/FLARE/GAINGAMMA/BLACK GAMMACINEMA GAMMAKNEE/WHITE CLIPMATRIXHD DTL/SKIN DTLSD DETAILSYSTEMFUNCTIONLENS FILE/EDIT
Cursor
3..Press.<SELECT>to.select.a.menu.The [SHADING(WHITE)] menu appears.In this state (when the cursor is in the menu title), press <SELECT> to return to the next higher menu ([ROP MENU]).
CHARA
MENU
SELECT
** SHADING( WHITE ) **
WHITE SHADING SWITCH
→
GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
4..Turn.<SELECT>.to.move.the.cursor.to.a.setting.and.press.<SELECT>.The selected setting flashes allowing you to change the set value.
** SHADING( WHITE ) **
WHITE SHADING SWITCH→
GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
Flashing
CHARA
MENU
SELECT
<Note>Turn <SELECT> quickly to change the hundreds place of a set value.
14 15
ROP.menu.operations. (continued)
��Operating.other.menusWhen a menu has more than one setting on a line, press <SELECT> (to confirm) and the cursor [] appears.Turn <SELECT> right or left to move the cursor to the input area.
↓ ↓↓↓ ↓
** SHADING( WHITE ) **
WHITE SHADING SWITCH
GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
Cursor movement
In a character entry menu, the [] cursor will also appear.
**LENS FILE/ EDIT( 1/ 2 ) **
FILE NO
FILE NAME
EXECUTE
MODE
↓↓↓↓↓↓↓↓↓
LOAD
NO?
Cursor movement
When the cursor is at the beginning of a menu, press <SELECT> to confirm to turn the cursor into [] to continue selecting menu items.
↓
** SHADING( WHITE ) **
WHITE SHADING SWITCH
→GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
** SHADING( WHITE ) **
WHITE SHADING SWITCH
GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
16 17
ROP.menu.setting
The following describes [ROP MENU] settings.
SHADING(WHITE)
** SHADING( WHITE ) **
WHITE SHADING SWITCH
→
GB
RHSAW HPRA VSAW VPARA
ON
0 0 0 0 0 0 0 0 0 0 0 0
( indicates factory default settings.)Item Display .Function
WHITE.SHADING.SWITCH
OFFON
Enables/disables white shading.
H.SAW.R -100׀0׀
100
Performs sawtooth wave correction of white screen images in the horizontal direction.
H.SAW.G
H.SAW.B
H.PARA.R -100׀0׀
100
Performs parabola correction of white screen images in the horizontal direction.H.PARA.G
H.PARA.B
V.SAW.R -100׀0׀
100
Performs sawtooth wave correction of white screen images in the vertical direction.V.SAW.G
V.SAW.B
V.PARA.R -100׀0׀
100
Performs parabola correction of white screen images in the vertical direction.V.PARA.G
V.PARA.B
PEDESTAL/FLARE/GAIN
→** PEDESTAL/FLARE/GAIN **
FLARE SWITCH
FLAREGAIN
MASTER PEDESTAL
PEDESTALR G B
ON
0 0 000
0
000
( indicates factory default settings.)Item Display Function
FLARE.SWITCH OFFON
Set to On to adjust flare correction amount.Flare correction controls the increase in pedestal level in proportion to light intensity.
MASTER.PEDESTAL
-99׀0׀
99
Indicates set master pedestal value. (Settings cannot be made.)
PEDESTAL.R -800׀0׀
800
Amount by which the level is increased or decreased relative to the G pedestal to adjust the black balance. When the auto black balance is achieved, 0 is set as the adjustment value.
PEDESTAL.G -800׀0׀
800
Adjusts the amount of G pedestal offset from master pedestal.
PEDESTAL.B -800׀0׀
800
Amount by which the level is increased or decreased relative to the G pedestal to adjust the black balance. When the auto black balance is achieved, 0 is set as the adjustment value.
FLARE.R -100׀0׀
100
Adjusts the amount of R FLARE correction.
FLARE.G -100׀0׀
100
Adjusts the amount of G FLARE correction
FLARE.B -100׀0׀
100
Adjusts the amount of B FLARE correction
GAIN.R -800׀0׀
800
Adjusts the white balance.Amount by which the R gain has to be increased or decreased relative to the G gain level. When the auto white balance is achieved, 0 is set as the adjustment value.
GAIN.B -800׀0׀
800
Adjusts the white balance.Amount by which the B gain has to be increased or decreased relative to the G gain level. When auto white balance is achieved, 0 is set as the adjustment value.
16 17
ROP.menu.setting. (continued)
GAMMA/BLACK.GAMMA
0. 450
** GAMMA/BLACK GAMMA **
GAMMA SWITCH
GAMMA
BLACK GAMMA
DRS SWITCHEFECT DEPTH
PRE-CORRECTION
BLACK GAMMA SWITCH
ON
OFF
OFF
R
R
00
0
5
00
4. 5
M
M
B
B
→
( indicates factory default settings.)Item Display Function
GAMMA.SWITCH OFFON
Turn on to correct the gamma.Gamma provides the signal level of the TV video signal with characteristics that are the reverse of those for video signal input and light intensity level.
GAMMA.R zVIDEO REC-75|0|
75 zFILMLIKE1 to 3
-60|
60
Adjusts R gamma correction relative to M gamma.
GAMMA.M 0.300׀
0.450׀
0.750
Adjusts the master gamma.
GAMMA.B zVIDEO REC-75|0|
75 zFILMLIKE1 to 3
-60|
60
Adjusts B gamma correction relative to M gamma.
BLACK.GAMMA.SWITCH
OFFON
Turn this switch on to correct the black gamma.It changes the amplification rate of the video signal in low light intensity areas.
BLACK.GAMMA.R
-20.(black.compression)
׀0׀
20.(black.expansion)
Corrects the black gamma curve R.
BLACK.GAMMA.M
-32.(black.compression)
׀0׀
32.(black.expansion)
Corrects the black gamma.
BLACK.GAMMA.B
-20.(black.compression)
׀0׀
20.(black.expansion)
Corrects the black gamma curve B.
Item Display FunctionDRS.SWITCH OFF
ONTurn on for automatic contrast adjustment.This adaptive-type gamma correction adjusts the gamma correction to the optimal setting.
EFFECT.DEPTH 1׀5
Turn on for contrast adjustment.Higher numbers mean greater effect.
PRE-CORRECTION
4.04.55.0.
Turn on to adjust the rising slope in low-light areas.
CINEMA.GAMMA
<Note>• The settings in this menu are not available when the [CINEMA
GAMMA SWITCH] is set to [OFF].
→** CINEMA GAMMA **
CINEMA GAMMA SWITCH
CINEMA GAMMA SELBLACK STRETCH LEVELDYNAMIC LEVEL
KNEE POINTKNEE SLOPE
CINEMA TYPEOFF
200%
150%
0
30
VIDEOVIDEO_REC
( indicates factory default settings.)Item Display Function
CINEMA.GAMMA.SWITCH
OFFON
Enables or disables cinema gamma mode.
CINEMA.TYPE VIDEOFILM
Switches between cinema gamma characteristics for video and those for film
CINEMA.GAMMA.SEL
zWhen [CINEMA TYPE] is set to [VIDEO]
VIDEO_RECFILMLIKE1FILMLIKE2FILMLIKE3
zWhen [CINEMA TYPE] is set to [FILM]
FILM_REC.(fixed).
Sets cinema gamma characteristics for video.
BLACK.STRETCH.LEVEL
0׀
30.
This function is available only when the [CINEMA GAMMA SWITCH] is set to [ON] and [CINEMA TYPE] is set to [FILM].
DYNAMIC.LEVEL
200%/300%/400%/500%.
Sets the dynamic rangeThis function is available only when [CINEMA TYPE] is set to [FILM].
KNEE.POINT*1 30׀
90
Sets the master knee point.Turn the Select dial clockwise to increase the knee point value. (The numbers decrease.)
KNEE.SLOPE*1 150%/200%/250%/300%/350%/400%/450%/500%/550%/600%.
Sets the master knee slope.
*1 When the Knee OFF button <KNEE OFF> is On or when [KNEE SWITCH] is set to [OFF] in the [KNEE/WHITE CLIP] menu, settings cannot be changed.
18
ROP.menu.setting. (continued)
19
KNEE/WHITE.CLIP
<Note>• Some settings in this menu are not available when the [CINEMA
GAMMA SWITCH] is set to [ON].
→** KNEE/WHITE CLIP **
KNEE SWITCH
POINT
WHITE CLIP SWITCH
CLIP
HI COLOR
SLOPE
ON
OFF
ON
R00
00
0 0
95. 0%130%
109%
M B
R M B
( indicates factory default settings.)Item Display Function
KNEE.SWITCH OFF/ON Turn on to adjust the knee slope and knee point.
POINT.R -20׀0׀
20.
Sets the R knee point.
POINT.M 80.0%׀
95.0%׀
110.0%.
Sets the master knee point.
POINT.B -20׀0׀
20.
Sets the B knee point.
SLOPE.R -31׀0׀
31.
Sets the R knee slope.
SLOPE.M 0׀
130׀
199
Sets the master knee slope.
SLOPE.B -31׀0׀
31.
Sets the B knee slope.
WHITE.CLIP.SWITCH
OFFON
Enables or disables the white clip function.
CLIP.R -15׀0׀
15
Sets the R white clip function.
CLIP.M 80%׀
109%
Sets the master white clip function.
CLIP.B -15׀0׀
15
Sets the B white clip function.
HI.COLOR OFFON
Turn on to improve the color reproducibility in the high-brightness areas.
MATRIX.(1/2)
→** MATRIX( 1/2 ) **
PRESET
MATRIX SWITCH
MEMORYR-GR-BG-RG-BB-RB-G
NORMAL
OFF
A000000
( indicates factory default settings.)Item Display Function
PRESET NORMALEBU
NTSC
Switches matrix presets.
MATRIX.SWITCH OFFON
Enables or disables saturation and color phase correction.
MEMORY OFFAB
Select matrix memory to adjust.
.R-G -63׀0׀
63
Adjusts the saturation and color phase of R and G components in matrix memory.
R-B -63׀0׀
63
Adjusts the saturation and color phase of R and B components in matrix memory.
G-R -63׀0׀
63
Adjusts the saturation and color phase of G and R components in matrix memory.
G-B -63׀0׀
63
Adjusts the saturation and color phase of G and B components in matrix memory.
B-R -63׀0׀
63
Adjusts the saturation and color phase of B and R components in matrix memory.
B-G -63׀0׀
63
Adjusts the saturation and color phase of B and G components in matrix memory.
18 19
ROP.menu.setting. (continued)
MATRIX.(2/2)
→** MATRIX( 2/2 ) **
12AXIS MEMORY
GSAT PHASE SAT PHASE
CyBMgRYe
G_CyCy_BB_MgMg_RR_YeYe_G
A
000000
000000
000000
000000
( indicates factory default settings.)Item Display Function
12AXIS.MEMORY
OFFAB
Select 12 AXIS memory to adjust.
G.SAT -63׀0׀
63
Adjusts the saturation of color components in 12 AXIS matrix memory.• Not available when [12 AXIS
MEMORY] is set to [OFF].
G_Cy.SATCy.SATCy_B.SATB.SATB_Mg.SATMg.SATMg_R.SATR.SATR_Ye.SATYe.SATYe_G.SATG.PHASE -63
׀0׀
63
Adjusts the color phase of color components in 12 AXIS matrix memory.• Not available when [12 AXIS
MEMORY] is set to [OFF].
G_Cy.PHASECy.PHASECy_B.PHASEB.PHASEB_Mg.PHASEMg.PHASEMg_R.PHASER.PHASER_Ye.PHASEYe.PHASEYe_G.PHASE
HD.DTL/SKIN.DTL.(1/2)
→** HD DTL/SKIN DTL( 1/2 ) **
DETAIL SWITCHV DETAILH DETAILCRISPPEAK FREQUENCYLEVEL DEPENDENTDARK DETAILSOURCECLIPKNEE DETAILGAIN
ON202010
0(R+G)/2
0( + ) 0 ( - ) 0
( + ) 0 ( - ) 0
8%17.3
( indicates factory default settings.)Item Display Function
DETAIL.SWITCH OFFON
Enables or disables the HD DETAIL effect.
V.DETAIL 0׀
20׀
63
Adjusts the level of vertical detail.
H.DETAIL 0׀
20׀
63
Adjusts the level of horizontal detail.
CRISP 0׀
10׀
63
Sets the maximum amplitude of the very faint noise components that are removed from detail components.
PEAK.FREQUENCY
12.4/12.5/12.7/12.9/13.0/13.3/13.6/13.9/14.2/14.6/15.0/15.5/16.1/16.7/17.3/18.0/18.6/18.8/19.0/19.2/19.5/19.9/20.3/20.9/21.5/22.4/23.6/25.4/28.6/37.1
Selects the contour correction frequency band (boost frequency or peak frequency). It changes the contour width.
LEVEL.DEPENDENT
0%׀
8%׀
30%
Lowers the detail in dark areas. It adjusts the level.
DARK.DETAIL 0׀7
Boosts the detail in dark areas.
SOURCE (R+G)/2(G+B)/2
(2G+R+B)/4(3G+R)/4
RG
Selects the source signals for creating the detail components.
+CLIP 0׀
63
Limits the length of the overshoot areas of the detail edge components.
-CLIP 0׀
63
Limits the length of the undershoot areas of the detail edge components.
KNEE.DETAIL 0׀
39
Enhances knee detail.
20
ROP.menu.setting. (continued)
21
Item Display Function+GAIN -31
׀0׀
31
Changes the detail gain level in + (up) direction
-GAIN -31׀0׀
31
Changes the detail gain level in - (down) direction
HD.DTL/SKIN.DTL.(2/2)
→** HD DTL/SKIN DTL( 2/2 ) **
SKIN DETAIL SWITCHCURSOR
SKIN GET
CRISP PHASE WIDTH SATUMEMORY SELECT
AB
ZEBRA SWITCHEFFECT MEMORY
OFF
OFFA+B
A
00
00
00
00
NO�OFF
ON/OFF H960
V270
( indicates factory default settings.)Item Display Function
SKIN.DETAIL.SWITCH
OFFON
Enables or disables control of skin tone detail in HDTV video output.
CURSOR OFFON
Enables or disables the position cursor that obtains the saturation and color phase information for controlling skin tone detail.
POS.H 1׀
960׀
1920
Sets horizontal cursor position.
POS.V 1׀
270.540
Sets vertical cursor position.
SKIN.GET NO?EXECUTECANCEL
Automatically obtains the saturation and color phase information from the cursor position.
NO?: Cancels operation.EXECUTE: Automatically obtains
saturation and color phase information from the cursor position.
CANCEL: Discards the saturation and
color phase information obtained from the cursor position.
MEMORY.SELECT
AB
Changes memory locations for saving the skin tone detail settings (CRISP, PHASE, WIDTH and SATURATION).
MEM.A.CLISP -63׀0׀
63
Removes very faint noise components from detail components in skin tone areas in memory bank A.
MEM.A.PHASE 0׀
359
Changes the color phase of skin tone areas in memory bank A in a range from 0 to 359 on a vector display.
Item Display FunctionMEM.A.WIDTH 0
׀255
Expands the width of skin tone areas in memory bank A in a range from 0 to 255.
MEM.A.SATU 0׀
255
Changes the saturation of skin tone areas in memory bank A in a range of 0 to 255.
MEM.B.CLISP -63׀0׀
63
Removes very faint noise components from detail components in skin tone areas in memory bank B.
MEM.B.PHASE 0׀
359
Changes the color phase of skin tone areas in memory bank B in a range of 0 to 359 on a vector display.
MEM.B.WIDTH 0׀
255
Expands the width of skin tone areas in memory bank B in a range from 0 to 255.
MEM.B.SATU 0׀
255
Changes the saturation of skin tone areas in memory bank B in a range from 0 to 255.
ZEBRA.SWITCH OFFAB
A+B
Adds a zebra pattern to the Y signals of the PM output to make areas subject to skin tone detail effects easily visible.
EFFECT.MEMORY
AB
A+B
Selects the memory bank to which skin tone detail effects will be added.
SD.DETAIL
→** SD DETAIL **
DETAIL SWITCHV DETAILH DETAILCRISPPEAK1PEAK2LEVEL DEPENDENTDARK DETAIL
ON
OFF
3
5%1
50
3.17M
( indicates factory default settings.)Item Display Function
DETAIL.SWITCH ONOFF
Enables or disables changes in contour enhancement (hard/soft) level of SDTV video output.
V.DETAIL 0׀3׀
63
Adjusts the amount of vertical detail.
H.DETAIL 0׀5׀
63
Adjusts the amount of horizontal detail.
CRISP 0׀
63
Sets the maximum amplitude of the very faint noise components that are removed from detail components.
PEAK1 1.89M/2.18M/2.56M/3.17M/4.0M/5.28M/
6.75M
Selects one of the two contour correction frequency bands (boost frequency or peak frequency). Changes the contour width.
PEAK2 OFF/1.89M/2.18M/2.56M/3.17M/4.00M/.5.28M/6.75M
Selects one of the two contour correction frequency bands (boost frequency or peak frequency). Changes the contour width.
20 21
ROP.menu.setting. (continued)
Item Display FunctionLEVEL.DEPENDENT
0׀
5.%׀
30.%
Lowers the detail in dark areas. It adjusts the level.
DARK.DETAIL 0׀1׀5
SYSTEM.(1/2)
→** SYSTEM ( 1/2 ) **
RETURN1RETURN2RETURN3RETURN4RETURN・DELAYDOWN CONVERT MODEUP CONVERT MODEHD COLOR BARPATHOSDI3-4 OUT
HD SDI1HD SDI1HD SDI1HD SDI1
NORMAL
SCARIB
OFFPM
SC
( indicates factory default settings.)Item Display Function
RETURN1 HD.SDI1HD.SDI2
VBS
Sets the input allocations of return signal 1.
RETURN2 HD.SDI1HD.SDI2
VBS
Sets the input allocations of return signal 2.
RETURN3 HD.SDI1HD.SDI2
VBS
Sets the input allocations of return signal 3.
RETURN4 HD.SDI1HD.SDI2
VBS
Sets the input allocations of return signal 4.
RETURN.·.DELAY
NORMALSHORT
Selects whether a RET display video will be delayed by 1 F (NORMAL) or by the shortest possible period (SHORT).
DOWN.CONVERT.MODE
SCSQLB
Selects the down-conversion system for video output from SD SDI and VBS.
UP.CONVERT.MODE
SCSQLB
Selects the up-conversion system for videos used as SD SDI and VBS return videos.
Item Display FunctionHD.COLOR.BAR FULL
BARS-1ARIB
BARS-2BARS-3BARS-4BARS-5BARS-6
Select the color bar signals to be output from the HD/SD SDI OUT connectors and VBS connector when “BAR” has been selected on the operation panel of the ROP.When they are output in VBS or SD format, color bars in HD format are output in the mode specified withDOWNCONVERT MODE.FULL: 75 % full field color barBARS-1: Color bar based on the
SMPTE standardARIB: ARIB multi-format color barBARS-2: Color bar based on the EIAJ
standardBARS-3: Split field color barBARS-4: 75 % full field color bar placed
in an area with a 4:3 aspect ratio.
(Displayed 40 % gray outside the area.)
BARS-5: Color bar based on the
SMPTE standard that is placed in an area with a 4:3 aspect ratio.
(Displayed 40 % gray outside the area.)
BARS-6: Color bar based on the EIAJ
standard that is placed in an area with a 4:3 aspect ratio.
(Displayed 40 % gray outside the area.)
PATHO OFFON
Select ON/OFF for the pathological signals.
SDI3-4.OUT NORMALPM
Selects the signals output from the 3rd and 4th HD/SD SDI signal output connectors on a CCU.
22
ROP.menu.setting. (continued)
23
SYSTEM.(2/2)
→** SYSTEM ( 2/2 ) **
HD H PHASESD H PHASESD-HD V
MIC1MIC2
GAIN AMP60dB60dB
0dB0dB
0H
00
( indicates factory default settings.)Item Display Function
HD.H.PHASE -1099׀0׀
1099.(59.94.Hz)
-1319׀0׀
1319.(50Hz)
Adjusts the horizontal phase of HD SD video for the genlock reference phase.
SD.H.PHASE -857׀0׀
857.(59.94Hz)
-863׀0׀
863.(50Hz)
Adjusts SD horizontal sync phase.
SD-HD.V 0HADVANCE
0H_SD_DLAY.
Set the vertical phase of the HDTV output in relation to the SDTV output.0H: Sets the vertical phase to the
same phase.ADVANCE: When the field frequency is
59.94 Hz, the phase advance is 90H.
When the field frequency is 50 Hz, the phase advance is 75H.
0H_SD_DLAY: The SDTV signals are delayed
and set in-phase with the HDTV signals.
• When the setting of this item is set to “0H” or “ADVANCE” while the field frequency is 50 Hz, images in SD format are delayed by 1 frame + 75 lines only when letterbox is selected for DOWNCONVERT MODE. For the relationship with the sync phase, refer to Operating Instructions <Operations and Settings> of AK-HCU200.
ADVANCE:. 59.94Hz→90H. 50Hz→75H
MIC1.GAIN 20dB40dB60dB
Performs coarse adjustment of MIC1 gain.
Item Display FunctionMIC1.AMP -20dB
׀0׀
20dB
Makes fine adjustments of the MIC1 gain.
(in.1.dB.increments)
MIC2.GAIN 20dB40dB60dB
Makes coarse adjustments of MIC2 gain.
MIC2.AMP -20dB׀0׀
20dB
Makes fine adjustments of MIC2 gain.
(in.1.dB.increments)
FUNCTION
→** FUNCTION **
ALC LEBELALC SPEEDALC WINDOWALC PEAKALC RANGE
ASU SETUPASU REF FILEASU MASTER PED SETASU FILTER
TALLY GUARD
50151
60NORMAL
OUT FULLFACTORY
2.0%REF
OFF
( indicates factory default settings.)Item Display Function
ALC.LEVEL 0׀
50׀
100
Adjusts the auto iris level of the lens iris.
ALC.SPEED 1׀
15׀
25
Sets the feedback speed of the auto iris.Feedback speed drops as the numbers increase.
ALC.WINDOW 1׀4
Sets the image detection area window for the auto iris.
ALC.PEAK 0׀
60׀
100
Sets the ratio between the average and peak values of auto iris image detection.
ALC.RANGE NORMAL3/42/41/4
Sets the correction range for adjustments of the iris level using the IRIS knob to move the iris lever <IRIS ( )> in auto iris mode.
ASU.SETUP OUT.FULLOUT.EASY
Selects the auto setup mode setting.
ASU.REF.FILE FACTORYUSER1USER2USER3
Selects the file to be referenced when auto setup has been started.
ASU.MASTER.PED.SET
0.0%׀
2.0%׀
7.5%
Sets the position where the master pedestal is to be converged when auto setup is started.
22 23
ROP.menu.setting. (continued)
Item Display FunctionASU.FILTER REF
CURRENTSets the operation of the ND filter when auto setup is started.
REF: The filter stored in the
reference file is used when operation starts.
CURRENT: Auto setup starts at the filter
position made prior to startup.
TALLY.GUARD OFFON
At the ON setting, this function disables automatic ASU, AWB, ABB operation while the tally is ON.
LENS.FILE/EDIT.(1/2)
→** LENS FILE/EDIT( 1/2 ) **
MODEFILE NO
FILE NAME
EXECUTE
LOADOFF
NO?
( indicates factory default settings.)Item Display Function
MODE LOADSTORE
Saves current lens files in the camera (STORE) or loads (LOAD) lens files stored in the camera.
FILE.NO. zWhen [LOAD] is selected as [MODE]
OFF1׀
32 zWhen [STORE] is selected as [MODE]
1׀
32
Selects the lens file number.
FILE.NAME Up.to.8.characters
Use to enter the file name.• It is disabled when [LOAD] is
selected in [MODE].
Allowable.characters0.-.9,.A.-.Z,.a.-.z,.._.(under.bar),..(space)
EXECUTE YES?NO?
Executes processes selected in MODE.
LENS.FILE/EDIT.(2/2)
→** LENS FILE/EDIT( 2/2 ) **
EXTENDERFILE
FLAREGAIN
RGB
STORE?CANCEL?
X1.0
R- - -
--
- - - -- - - -- - - -
--
G B
HSAW HPARA VSAW VPARA
( indicates factory default settings.)Item Display Function
EXTENDER x.1.0x.2.0
Sets the current magnification of the lens extender.
FILE Displays the number and name of currently loaded lens files.
FLARE.R -100׀0׀
100
Sets lens R flare.
FLARE.G -100׀0׀
100
Sets lens G flare.
FLARE.B -100׀0׀
100
Sets lens B flare.
GAIN.R -100׀0׀
100
Sets lens R gain.
GAIN.B -100׀0׀
100
Sets lens B gain.
R.HSAW -100׀0.׀
100
Sets lens white shading.
R.HPARAR.VSAWR.VPARAG.HSAWG.HPARAG.VSAWG.VPARAB.HSAWB.HPARAB.VSAWB.VPARASTORE? YES?
NO?Saves R/G/B gain, R/G/B flare and white shading settings to the displayed file.
CANCEL? YES?NO?
Discards R/G/B gain, R/G/B flare and white shading settings and restores the original lens files.
24 25
Data.handled.in.the.studio.camera.system
The following shows the data handled in the studio camera system.The AK-HRP200 (ROP) memory card stores camera and CCU data.
AK-HC3800 (Camera)
LENS 1
LENS 32
LENS 1
LENS 32
USER 1
USER 2
USER 3
USER 2
USER 3
SCENE 1
SCENE 2
SCENE 3
SCENE 4
USER 1
USER 2
USER 3
SCENE 1
SCENE 2
SCENE 3
SCENE 4
SCENE 1
SCENE 2
SCENE 3
SCENE 4
AK-HCU200 (CCU) AK-HRP200 (ROP)
USER 1
Operation data(for camera)
Operation data(for CCU)
Scene file(for camera)
Scene file(for CCU)
Memory card
Name Quantity Description Data.R/W Memory.card.R/W
Lens.file.(LENS) 1 to 32 This data is used by video engineers (VE) to correct the characteristics specific to the lenses and is managed by the camera. It can be saved and read by operation on the ROP. It can also be saved and read to/from the memory card on the ROP.For a list of data, refer to the Operating Instructions for AK-HRP200G.
ROP ROP
Scene.file.(SCENE) 1 to 4 This data for creating pictures is handled mainly by video engineers (VE) and is managed by the camera. It can be saved and read by operation on the ROP. It can also be saved and read to/from the memory card on the ROP.For a list of data, refer to the Operating Instructions for AK-HRP200G.
ROP ROP
User.file.(USER) 1 to 3 This system setting data consists of scene file managed by the camera, camera operation data, and scene file managed by the CCU. It can be saved and read by operation on the ROP. It can also be saved and read to/from the memory card on the ROP.
ROP ROP
�� .Initializing.data
Name
How.to.initialize.dataHold down <TALLY/CALL> while pressing <SHIFT> and <SCENE4> on the ROP to initialize.(When initialization completes, turn off the CCU.)
Initializing using camera, CCU and ROP functions
Scene.files : Are initialized *2 -
User.files : Are initialized *2 -
Lens.files : Are initialized -
Camera.settings : Are initialized *3 -
CCU.settings : Are not initialized : Choose [SYSTEM] > [INTIALIZE] in the CCU menu to initialize. *4
ROP.settings : Are not initialized : Use [16] in the ROP setup menu to initialize.
*1 Includes [SD DETAIL] settings of scene files and user files.*2 [SD DETAIL] settings are not initialized.*3 Frame frequency is also initialized.
When a camera image does not appear after initialization, check whether the frame frequency matches the (frequency) of the CCU [CCU MODE].*4 [Frame frequency] of [CCU MODE] is also initialized.
When a camera image does not appear after initialization, check whether [CCU MODE] matches the frame frequency of the camera.
24 25
Data.item.list
��Camera.(menu.list).zOPERATION
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
MARKER SIDE MODULE LEVEL 0 to 15 0
ZONE MARK OFF, 4:3, 13:9, 14:9, 15:9, 16:9 OFF
SAFETY AREA - -
MODE TYPE1, TYPE2 TYPE1
SETTING 80% to 100%OFF, 4:3, 13:9, 14:9, 15:9, 16:9
80% (MODE TYPE1)
OFF (MODE TYPE2)
CENTER MARK OFF, 1 to 4 OFF
MARKER LEVEL 50%, 60%, 70%, 80%, 90%, 100%
100%
USER BOX ON, OFF OFF
HORIZONTAL POSITION -50 to 50 0
VERTICAL POSITION -50 to 50 0
WIDTH 0 to 100 50
HEIGHT 0 to 100 50
VIEW FINDER SETTING VIEW FINDER DETAIL 0 to 23 6
RETURN SIGNAL - -
PEAK FREQUENCY LOW, MID, HIGH MID
OFFSET GAIN 0 to 5 0
CRISP 0 to 15 10
INDICATOR1 FOCUS ON, OFF OFF
ZOOM ON, OFF OFF
EXTENDER ON, OFF OFF
DIGITAL EXTENDER ON, OFF OFF
F NUMBER ON, OFF OFF
MASTER GAIN ON, OFF OFF
FILTER ON, OFF OFF
SHUTTER ON, OFF OFF
5600K ON, OFF OFF
WHITE CHANNEL ON, OFF OFF
DRS ON, OFF OFF
CAC ON, OFF OFF
INDICATOR2 FAN ON, OFF OFF
AUDIO LEVEL ON, OFF OFF
OPTICAL LEVEL ON, OFF OFF
RETURN SELECT ON, OFF OFF
STATUS ON, OFF OFF
STATUS(AUTO) ON, OFF OFF
CAMERA MODE ON, OFF OFF
SYSTEM MODE ON, OFF OFF
SWITCH MODE GRIP RET RET A, RET B, PTT RET A
GRIP PTT RET A, RET B, PTT PTT
LENS VTR RET A, RET B, PTT, INH RET B
LENS RET RET A, RET B RET A
EXTERNAL RETURN1 RET A, RET B, D.EXT RET A
EXTERNAL RETURN2 RET A, RET B, D.EXT RET B
EXTERNAL RETURN3 RET A, RET B, D.EXT RET B
USER SWITCH1 RET A, RET B, PTT, DISP, MARK, D.EXT
RET A
USER SWITCH2 RET A, RET B, PTT, DISP, MARK, D.EXT
PTT
USER SWITCH3 RET A, RET B, PTT, DISP, MARK, D.EXT
PTT
26
Data.item.list. (continued)
27
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
RETURN SETTING RETURN MODE NORM, TOGGLE, SEQ. NORM
RETURN SELECT - -
RETURN A 1, 2, 3, 4 1
RETURN B 1, 2, 3, 4 2
ID SETTING - -
RETURN 1 "RET1 "(5 characters) RET1
RETURN 2 "RET2 "(5 characters) RET2
RETURN 3 "RET3 "(5 characters) RET3
RETURN 4 "RET4 "(5 characters) RET4
SETTING CALL TALLY OFF, R, T, R&T OFF
HD-SDI2 OUT MAIN, VF, RET VF
HD-SDI2 POWER ACTIVE, SAVE ACTIVE
FAN POWER ON, OFF ON
ID CHARACTER (10 characters) -
!LED EXTENDER ON, OFF OFF
MASTER GAIN ON, OFF OFF
SHUTTER ON, OFF OFF
GAMMA OFF ON, OFF OFF
BLACK GAMMA ON, OFF OFF
MIC/INCOM SETTING MIC1 - -
GAIN 20dB, 40dB, 60dB 60dB
AMP –20dB to 20dB 0dB
MIC2 - -
GAIN 20dB, 40dB, 60dB 60dB
AMP –20dB to 20dB 0dB
INCOM - -
MIC TYPE DYN, ECM, CBN DYN
MIC GAIN –12dB to 12dB 0dB
MIC POWER ON, OFF OFF
SIDE TONE OFF, –36dB to 0dB -6dB
PGM MIX ON, OFF ON
26 27
Data.item.list. (continued)
.zMAINTENANCE
Menu Item Adjustment.range Default.value.Protected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
SD CARD R/W READ SELECT 1 to 8 1
READ YES, NO NO
WRITE SELECT 1 to 8 1
WRITE YES, NO NO
CARD CONFIG YES, NO NO
CAC ADJUST CAC CONTROL ON, OFF ON
CAC FILE DELETE YES, NO NO
CAC FILE NUMBER 1 to 32 1
TITLE SCROLL 1 to 25 1
CAC FILE CARD READ CARD FILE SELECT 1 to 32 1
READ YES, NO NO
DELETE YES, NO NO
TITLE READ YES, NO NO
TITLE SCROLL 1 to 25 1
FILE READ TITLE - -
YES - -
NO(CANCEL) - -
MEM STORE NO EMPTY, 1 to 32 EMPTY
TITLE SCROLL 1 to 25 1
AUTO SET UP FILTER REF/CURRENT REF
SETUP MODE FULL/EASY FULL
REFERENCE FILE FACTORY, USER1, USER2, USER3
FACTORY
MASTER PED TARGET 0.0% to 7.5% 2.0%
AUTO SET UP EXECUTE YES, NO NO
TALLY GUARD ON, OFF OFF
COLOR BAR SMPTE, FULL BAR, ARIB FULL BAR
DIAGNOSTIC PULSE (Displays PULSE FPGA version) -
CAM (Displays CAM FPGA version) -
AVIO (Displays AVIO FPGA version) -
CAMERA SOFT (Displays CAMERA software version)
-
CAMERA TABLE (Displays CAMERA table version)
-
HOURS METER [h] - -
HEAD 0 to 65000 -
FAN 0 to 65000 -
SYSTEM FORMAT 59.94i, 50i 59.94i*1
50i*2
SCAN REVERSE ON, OFF OFF
DNR ON, OFF ON
SYSTEM FILE DATA - -
WRITE CARD YES, NO NO
GAIN MAX LIMIT 12dB, 36dB 12dB
UPDATE YES, NO NO
*1 AK-HC3800G/GS*2 AK-HC2500MC/MS
28
Data.item.list. (continued)
29
��CCU.(menu.list)
Menu Submenu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
OPERATION SETTING1 CCU MODE 1080/59.94i 1080/50i
59.94Hz *1 : 1080/59.94i50Hz *2 : 1080/50i
SDI RETURN1 HD SD
HD
SDI RETURN2 HD SD
HD
SDI OUTPUT1&2 HD SD
HD
SDI OUTPUT3&4 HD SD
HD
SDI OUTPUT3&4 NORMAL/PM
NORMAL PM
PM
COMPOSITE NORMAL/PM
NORMAL PM
PM
SETTING2 FS DELAY NORMAL SHORT
NORMAL
HD BAR SELECT FULLBARS-1ARIBBARS-2BARS-3BARS-4BARS-5BARS-6
ARIB
BAR LPF OFF 3TAP 5TAP 7TAP 9TAP
7TAP
BAR USER1 75%WHITE 100%WHITE +I_SIGNAL -I_SIGNAL
75%WHITE
BAR USER2 0%BLACK +Q_SIGNAL
0%BLACK
SETUP 7.5% ON OFF
OFF
PATHO ON OFF
OFF
HD / SD PHASE HD H PHASE 59.94Hz: -1099 to 109950Hz: -1319 to 1319
59.94Hz: 0 50Hz: 0
SD H PHASE 59.94Hz: -857 to 857 50Hz: -863 to 863
59.94Hz: 0 50Hz: 0
SD-HD V 0H, ADVANCE, 0H_SD_DLAY* ADVANCE: 59.94Hz→90H, 50Hz→75H
0H
BAR ID BAR ID SWITCH ON OFF
OFF
BRIGHTNESS 0 to 100% (in 10% increments)
100%
ID1 POSITION Row: 0 to 5 Column: 0 to 15
Row: 0 Column: 0
ID1 Up to 16 characters ##
ID2 POSITION Row: 0 to 5 Column: 0 to 15
Row: 1 Column: 0
ID2 Up to 16 characters ##
OFFSET Horizontal: 0 to 89 Vertical: 0 to 79
Horizontal: 0 Vertical: 0
*1 AK-HCU200/S, AK-HCU200P/PS, AK-HCU200E/ES*2 AK-HCU200MC/MS
28 29
Data.item.list. (continued)
Menu Submenu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
OPERATION INCOM/MIC 4W/RTS IN Level -40.0 to 20.0 dB (in 0.5 dB increments)
0 dB
4W/RTS OUT Level -40.0 to 20.0 dB (in 0.5 dB increments)
0 dB
RTS Cancel -40.0 to 31.5 dB(in 0.5 dB increments)
0 dB
GAIN PGM 0dB 20dB
0 dB
MIC1 LEVEL -40.0 dB to 20.0 dB (in 0.5 dB increments)
0 dB
MIC2 LEVEL -40.0 dB to 20.0 dB (in 0.5 dB increments)
0 dB
CM/DM CM DM
DM
CCU INCOM MIC -40.0 dB to 12.0 dB (in 0.5 dB increments)
0 dB
CCU SIDE TONE -40.0 dB to 0 dB (in 0.5 dB increments)
-6 dB
MAINTENANCE START UP CAM POWER OFF ON REMOTE
REMOTE
VF POWER OFF ON REMOTE
REMOTE
ANALOG GAIN COMPOSITE -50 to 50 0
ND NAME ND1 NAME 4 characters 1
ND2 NAME 4 characters 2
ND3 NAME 4 characters 3
ND4 NAME 4 characters 4
NETWORK IP ADDRESS 192.168.0.20
SUB NETMASK 255.255.255.*** to255.255.255.***(Range: 0, 128, 192, 224, 240, 248, 252, 254, 255)
0
DEFAULT GATEWAY 192.168.0.1
PORT 1 to 65535(However, the following numbers are excluded.) -20/21 (FTP) -25 (SMTP) -42/53 (DNS) -69 (tFTP) -23 (telnet) -110/995 (POP3) -123 (NTP) -67/68 (BOOTP/DHCP) -10669/10670 (BOOTP) -161/162 (SNMP)
80
MAC ADDRESS Displayed only
VERSION SOFTWARE Displayed only
HARDWARE FPGA1 Displayed only
HARDWARE FPGA2 Displayed only
HARDWARE FPGA3 Displayed only
30
Data.item.list. (continued)
31
Menu Submenu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
MAINTENANCE PM VIEW SETTING CAMERA No. ON OFF
ON
CAM MOD ON OFF
ON
SCENE FILE No. ON OFF
ON
SHUTTER ON OFF
ON
ND FILTER ON OFF
ON
GAIN ON OFF
ON
EXTENDER INFO ON OFF
ON
IRIS ON OFF
ON
IRIS LEVEL ON OFF
ON
PM OPERATION STATUS
STATUS DISPLAY TIME 0 2 4
4
MASTER GAIN ON OFF
ON
SHUTTER ON OFF
ON
LENZE EXTENDER ON OFF
ON
FILTER ON OFF
ON
SCENE FILE ON OFF
ON
REF LOAD ON OFF
ON
AUTO OPERATION STATUS
ON OFF
ON
SYSTEM INITIALIZE NO? YES?
NO?
SD CARD DOWNLOAD DATA BACK UP
NO? YES?
NO?
DOWNLOAD DATA LOG NO? YES?
NO?
UPLOAD DATA BACKUP NO? YES?
NO?
UPDATE NO? YES?
NO?
CARD FORMAT NO? YES?
NO?
30 31
Data.item.list. (continued)
��ROP.(menu.list)
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
SHADING(WHITE) WHITE SHADING SWITCH OFF/ON ON
H SAW R -100 to 100 0
H SAW G -100 to 100 0
H SAW B -100 to 100 0
H PARA R -100 to 100 0
H PARA G -100 to 100 0
H PARA B -100 to 100 0
V SAW R -100 to 100 0
V SAW G -100 to 100 0
V SAW B -100 to 100 0
V PARA R -100 to 100 0
V PARA G -100 to 100 0
V PARA B -100 to 100 0
PEDESTAL/FLARE/GAIN FLARE SWITCH OFF/ON ON
MASTER PEDESTAL -99 to 99 0
PEDESTAL R -800 to 800 0
PEDESTAL G -800 to 800 0
PEDESTAL B -800 to 800 0
FLARE R -100 to 100 0
FLARE G -100 to 100 0
FLARE B -100 to 100 0
GAIN R -800 to 800 0
GAIN B -800 to 800 0
GAMMA/BLACK.GAMMA GAMMA SWITCH OFF/ON ON
GAMMA R -75 to 75 (VIDEO_REC)-60 to 60 (FILMLIKE1 to 3)
0
GAMMA M 0.300 to 0.750 (VIDEO_REC)0.3000 to 0.7500 (FILMLIKE1 to 3)
0.450
GAMMA B -75 to 75 (VIDEO_REC)-60 to 60 (FILMLIKE1 to 3)
0
BLACK GAMMA SWITCH OFF/ON OFF
BLACK GAMMA R -20 (black compression) to 20 (black expansion)
0
BLACK GAMMA M -32 (black compression) to 32 (black expansion)
0
BLACK GAMMA B -20 (black compression) to 20 (black expansion)
0
DRS SWITCH OFF/ON OFF
EFFECT DEPTH 1 to 5 1
PRE-CORRECTION 4.0/4.5/5.0 4.5
CINEMA GAMMA CINEMA GAMMA SWITCH OFF/ON OFF
CINEMA TYPE VIDEO/FILM VIDEO
CINEMA GAMMA SEL When [CINEMA TYPE] is set to [VIDEO]VIDEO_REC/FILMLIKE1/FILMLIKE2/FILMLIKE3When [CINEMA TYPE] is set to [FILM]FILM_REC (fixed)
VIDEO_REC
BLACK STRETCH LEVEL 0 to 30 0
DYNAMIC LEVEL 200%/300%/400%/ 500%
200%
KNEE POINT 30 to 90 30
KNEE SLOPE 150%/200%/250%/ 300%/350%/400%/ 450%/500%/550%/ 600%
150%
32
Data.item.list. (continued)
33
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
KNEE/WHITE CLIP KNEE SWITCH OFF/ON ON
POINT R -20 to 20 0
POINT M 80.0% to 110.0% 95.0%
POINT B -20 to 20 0
SLOPE R -31 to 31 0
SLOPE M 0 to 199 130
SLOPE B -31 to 31 0
WHITE CLIP SWITCH OFF/ON ON
CLIP R -15 to 15 0
CLIP M 80% to 109% 109%
CLIP B -15 to 15 0
HI COLOR OFF/ON OFF
MATRIX (1/2) PRESET NORMAL/EBU/NTSC NORMAL
MATRIX SWITCH OFF/ON OFF
MEMORY OFF/A/B A
R-G -63 to 63 0
R-B -63 to 63 0
G-R -63 to 63 0
G-B -63 to 63 0
B-R -63 to 63 0
B-G -63 to 63 0
MATRIX (2/2) 12AXIS MEMORY OFF/A/B A
G SAT -63 to 63
Not available when [12 AXIS MEMORY] is set to [OFF].
0
G_Cy SAT 0
Cy SAT 0
Cy_B SAT 0
B SAT 0
B_Mg SAT 0
Mg SAT 0
Mg_R SAT 0
R SAT 0
R_Ye SAT 0
Ye SAT 0
Ye_G SAT 0
G PHASE -63 to 63
Not available when [12 AXIS MEMORY] is set to [OFF].
0
G_Cy PHASE 0
Cy PHASE 0
Cy_B PHASE 0
B PHASE 0
B_Mg PHASE 0
Mg PHASE 0
Mg_R PHASE 0
R PHASE 0
R_Ye PHASE 0
Ye PHASE 0
Ye_G PHASE 0
32 33
Data.item.list. (continued)
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
HD DTL/SKIN DTL (1/2) DETAIL SWITCH OFF/ON ON
V DETAIL 0 to 63 20
H DETAIL 0 to 63 20
CRISP 0 to 63 10
PEAK FREQUENCY 12.4/12.5/12.7/12.9/ 13.0/13.3/13.6/13.9/ 14.2/14.6/15.0/15.5/ 16.1/16.7/17.3/18.0/ 18.6/18.8/19.0/19.2/ 19.5/19.9/20.3/20.9/ 21.5/22.4/23.6/25.4/ 28.6/37.1
17.3
LEVEL DEPENDENT 0 to 30% 8%
DARK DETAIL 0 to 7 0
SOURCE (R+G)/2, (G+B)/2, (2G+R+B)/4, (3G+R)/4, R, G
(R+G)/2
+CLIP 0 to 63 0
-CLIP 0 to 63 0
KNEE DETAIL 0 to 39 0
+GAIN -31 to 31 0
-GAIN -31 to 31 0
HD DTL/SKIN DTL (2/2) SKIN DETAIL SWITCH OFF/ON OFF
CURSOR OFF/ON OFF
POS H 1 to 1920 960
POS V 1 to 540 270
SKIN GET NO?: Cancel the operationEXECUTE: Automatically obtains saturation and color phase information from the cursor position.CANCEL: Discards the saturation and color phase obtained from the cursor position.
NO?
MEMORY SELECT A/B A
MEM A CLISP
-63 to 63 0
MEM A PHASE
0 to 359 0
MEM A WIDTH
0 to 255 0
MEM A SATU
0 to 255 0
MEM B CLISP
-63 to 63 0
MEM B PHASE
0 to 359 0
MEM B WIDTH
0 to 255 0
MEM B SATU
0 to 255 0
ZEBRA SWITCH OFF/A/B/A+B OFF
EFFECT MEMORY A/B/A+B A+B
SD DETAIL DETAIL SWITCH ON/OFF ON
V DETAIL 0 to 63 3
H DETAIL 0 to 63 5
CRISP 0 to 63 0
PEAK1 1.89M/2.18M/2.56M/ 3.17M/4.0M/5.28M/ 6.75M
3.17M
PEAK2 OFF/1.89M/2.18M/ 2.56M/3.17M/4.00M/ 5.28M/6.75M
OFF
LEVEL DEPENDENT 0 to 30% 5
DARK DETAIL 0 to 5 1
34
Data.item.list. (continued)
35
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
SYSTEM (1/2) RETURN1 HD SDI1/HD SDI2/VBS HD SDI1
RETURN2 HD SDI1/HD SDI2/VBS HD SDI2
RETURN3 HD SDI1/HD SDI2/VBS HD SDI1
RETURN4 HD SDI1/HD SDI2/VBS HD SDI2
RETURN · DELAY NORMAL/SHORT NORMAL
DOWN CONVERT MODE SC/SQ/LB SC
UP CONVERT MODE SC/SQ/LB SC
HD COLOR BAR FULL/BARS-1/ARIB/BARS-2/BARS-3/BARS-4/BARS-5/BARS-6
ARIB
PATHO OFF/ON OFF
SDI3-4 OUT NORMAL/PM PM
SYSTEM (2/2) HD H PHASE -1099 to 1099 (59.94Hz)-1319 to 1319 (50Hz)
0
SD H PHASE -857 to 857 (59.94Hz)-863 to 863 (50Hz)
0
SD-HD V 0H/ADVANCE/ 0H_SD_DLAYADVANCE: 59.94Hz→90H 50Hz→75H
0H
MIC1 GAIN 20dB/40dB/60dB 60dB
MIC1 AMP -20 dB to 20 dB in 1 dB increments
0
MIC2 GAIN 20dB/40dB/60dB 60dB
MIC2 AMP -20 dB to 20 dB in 1 dB increments
0
FUNCTION ALC LEVEL 0 to 100 50
ALC SPEED 1 to 25 15
ALC WINDOW 1 to 4 1
ALC PEAK 0 to 100 60
ALC RANGE NORMAL, 3/4, 2/4, 1/4 NORMAL
ASU SETUP OUT FULL/OUT EASY OUT FULL
ASU REF FILE FACTORY/USER1/USER2/USER3
FACTORY
ASU MASTER PED SET 0.0% to 7.5% 2.0%
ASU FILTER REF: The filter set in the reference file is used at startup.CURRENT: Auto setup starts at the filter position made prior to startup.
REF
TALLY GUARD OFF/ON OFF
LENS FILE/EDIT (1/2) MODE LOAD/STORE LOAD
FILE NO. When [LOAD] is selectedOFF/1 to 32When [STORE] is selected1 to 32
OFF
FILE NAME Up to 8 characters when [STORE] is selected Allowable characters 0 to 9, A to Z, a to z, _ (underscore), (space)It is disabled when [LOAD] is selected in [MODE].
-
EXECUTE YES? / NO? NO?
34 35
Data.item.list. (continued)
Menu Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
LENS FILE/EDIT (2/2) EXTENDER x1.0/x2.0 x1.0
FILE -
FLARE R -100 to 100 0
FLARE G -100 to 100 0
FLARE B -100 to 100 0
GAIN R -100 to 100 0
GAIN B -100 to 100 0
R HSAW -100 to 100 0
R HPARA -100 to 100 0
R VSAW -100 to 100 0
R VPARA -100 to 100 0
G HSAW -100 to 100 0
G HPARA -100 to 100 0
G VSAW -100 to 100 0
G VPARA -100 to 100 0
B HSAW -100 to 100 0
B HPARA -100 to 100 0
B VSAW -100 to 100 0
B VPARA -100 to 100 0
STORE? YES? / NO? NO?
CANCEL? YES? / NO? NO?
��ROP.(panel.operations)
Item Adjustment.range Default.valueProtected.settings
SCENE1.to.4
USER1.to.3
LENS1.to.32
5600K ON/OFF OFF
MATRIX ON/OFF OFF
SKIN DTL ON/OFF OFF
KNEE OFF ON/OFF ON
DTL OFF ON/OFF ON
ND 1 to 4 1
M.GAIN -3 to 12 (in 3 dB steps)18, 27, 36• Depends on camera setting.
0
SHUTTER ON/OFF OFF
at 59.94 Hz STEP: 1/100 to 1/2000SYNCRO: 60.0 to 250 at 50 Hz STEP: 1/60 to 1/2000 SYNCRO: 50.0 to 250
1/100 (59.94Hz)
1/60 (50Hz)
AUTO IRIS ON/OFF OFF
36 37
Index
CCamera menu ...................................................................................... 25Camera number ...................................................................................... 7CCU menu ........................................................................................... 28CINEMA-GAMMA ................................................................................ 17
EError display ........................................................................................ 13
FFormat (memory card) ......................................................................... 11FUNCTION .......................................................................................... 22
GGAMMA/BLACK.GAMMA .................................................................... 17
HHD DTL/SKIN DTL ........................................................................ 19, 20
IInitialize ................................................................................................ 11
KKNEE/WHITE CLIP ............................................................................. 18
LLENS FILE/EDIT ................................................................................. 23
MMATRIX ......................................................................................... 18, 19
OOptional accessory .............................................................................. 10
PPEDESTAL/FLARE/GAIN ................................................................... 16Protective panel ............................................................................. 10, 11
RROP configuration file ............................................................................. 9
Load ............................................................................................ 10Save ............................................................................................ 10
ROP menuList ............................................................................................... 31Operation ..................................................................................... 14Setting ......................................................................................... 16
SSave .................................................................................................. 8, 9
Load .......................................................................................... 8, 9Protective panel for transportation ................................................. 8Warning .......................................................................................... 9
Save unit data ...................................................................................... 12Scene file ................................................................................................ 7
Load ............................................................................................... 7Save ............................................................................................... 7
SD DETAIL .......................................................................................... 20Set 7-segment display brightness ...................................................... 11Set buzzer ........................................................................................... 10Set display brightness ........................................................................ 12Set LED display brightness ................................................................ 11Setup mode ............................................................................................ 4SHADING(WHITE) .............................................................................. 16Standard accessories .......................................................................... 11SYSTEM ........................................................................................ 21, 22
UUpgrade .............................................................................................. 12
36 37
Memo
Web Site: http://panasonic.net
プロフェッショナルAVビジネスユニット〒 571-8503 大阪府門真市松葉町 2 番 15 号 ☎ (06) 6901-1161
©Panasonic Corporation 2012