Remote Accessing Your Home Computer Using VNC

and a Dynamic DNS Name

What will I need?Static IP number on your

home PCDynDNS Account and

Update ClientVersion of VNC server and

ViewerConfigure port forwarding

and remote access on your router or modem at home.

Setting a Static IP

Current IP Number

Current Subnet Mask

Current Gateway

Setting a Static IPEnter numbers for the Static IP

Setting up a DynDNS Accounthttp://www.dyndns.com/

Add a new Hostname.

Associate current WAN IP with new Hostname

Setting up the DynDNS UpdaterDownload and install the DynDNS

Update Client

Enter account details

Setting up VNCDownload and install VNC using all the default

setup options.http://www.realvnc.com/

Copy vncviewer.exe from Program Files to a USB drive to make the viewer a portable version.

Configure Router-Port ForwardingType the IP of your router into browser:

Usually 10.1.1.1 or 192.168.1.1Add port forward rule for VNC to your router

using default port of 5900.

Configure Router-Remote AccessConfigure your router for remote access via

web browser.

Testing Remote AccessTesting is performed outside of your home

network.Type the newly created DynDNS hostname

into web browser. This will allow you to log in to your router remotely.

Once logged in, copy your current WAN IP address.

Testing Remote Access

Open VNC Viewer, paste the WAN IP into the “VNC Server” box, click Connect

Enter password. This is your windows logon password by default.

Testing Remote Access