Upload
ngodiep
View
219
Download
0
Embed Size (px)
Citation preview
HIGH SYSTEMAVAILABILITY
RUBBER CONVEYOR BELTSRELIABLE QUALITY FOR DIVERSE CONVEYING TASKS
WE – THE TEAM OF STRICKER – STAND FOR:• professional consultation
• high-performance and innovative products
• individual solutions
• high quality and durable materials
• on-time delivery
• reliable assembly and maintenance
WE WOULD BE HAPPY TO ADVISE YOUOur staffs are available at all times for your individual questions and projects.
Stricker GmbH und Co. KG
An der Kleimannbrücke 4
48157 Münster
Phone: +49 251 3288-0
Fax: +49 251 3288-129
www.stricker.ms/en/gummi/conveyor_technology/rubber_conveyor_belts
PRECISION TECHNOLOGY BULK GOODS AND PACKAGED GOODS HANDLINGOur proven and highly quality rubber conveyor belts are used for the transport of various materials and are available in different designs depending on requirements.
Rubber conveyor belts are mainly used in bulk goods and packaged goods handling such as sand, gravel, earth, stones, grain, wood or coal and are
also suitable for transporting hot bulk materials, chemicals, industrial goods, oil-containing materials and recyclable materials or foodstuffs.
Depending on the requirements endless splicing can be implemented using the hot or cold vulcanisation process or mechanical connections.
EP CONVEYOR BELTSExtremely robust for transports with heavy loads
Stricker EP conveyor belts are the ideal solution for heavy transport tasks over medium to long distances. With them even sharp and abrasive materials such as ore, gravel or rocks can be transported. For even higher loads we deliver our EP conveyor belts with transverse reinforcement.
Their cover plates are made of an extremely abrasion-proof, cut and wear-resistant rubber. This makes the belts not only stable, but also reliable and durable. The multilayer EP tension members and separation-proof intermediate rubber lining further aid this.
Stricker EP conveyor belts are antistatic and are characterized by an extremely low surface resistance and low belt elongation. They are available in widths up to 4500 mm and strength up to 2000/5 N/mm – for a particularly wide range of applications.
STEEP-ANGLE CONVEYOR BELTSPerfect transport at medium slopes
Anyone conveying bulk goods and packaged goods at a gradient angle above 20 ° achieves excellent results with profiled steep-angle belts. This makes it possible to trans-port materials such as sand, gravel, stones, earth, grain or wood as well as hot or oil-containing materials.
Stricker‘s steep-angle conveyor belts are manufactured using the cold and hot vulcanisation process and made individually according to your requirements or specifications.
The range of steep-angle conveyor belts is rounded off by elevator belts with the corresponding plastic or steel buckets.
Based on a wide range of different profiles we manufacture according to your requirements and specifications.
TECHNICAL DATA
EP conveyor belts
Strength classes 250–2000 N/mm
Bandwidth 350–4500 mm
Tension members EP
Cover plates
Cover plates thickness 0–40 mm
Temperature range
normal quality
hot material quality
super hot material quality
Cover plates quality
abrasion-proof
oil and grease-resistant
flame retardant
self-extinguishing
antistatic
Special constructions
transverse stability
cut protection
punching protection
sliding fabric
Deliverable in accordance with the applicable European and American standards. Special designs on request.
TECHNICAL DATA
Steep-angle conveyor belts
Bandwidth 400–2000 mm
Profile height 6–30 mm
Special designs on request.
AREAS OF USEpower stations
steel works
stone quarries
sand, gravel industry
cement plants
woodworking industry
recycling industry
agriculture
port and terminal technology
AREAS OF USEcoal-fired power stations
combined heat and power station and incineration plants
mining and salt extraction
iron and steel industry
sand, gravel and stone industry
cement and concrete industry
woodworking and sawmill
chemical industry
recycling, composting and processing plants
port and terminal technology
road construction
STEEL CABLE BELTSPutting coarse material and large materials in motion
Whether in mining or handling in the port, in the steel industry or in power stations – when large masses or volumes must be moved, conveyor systems with extremely robust belts are demanded.
The Stricker steel cable conveyor belts are specially designed for all transportation services under extremely harsh condi-tions. Thanks to their enormous tear strength and stability, they are very well suited for all materials with very rough structures.
We provide our steel cable conveyor belts in the qualities of X, Y, K and V. They consistently comply with the standards of DIN 22131 and ISO 15236.
ARAMID BELTSProduced with the strongest fiber in the world
At Stricker we use Aramid fibres so that even under most extreme conditions it never comes to the trial of strength between the conveyor belt and transport material.
Our Aramid conveyor belts combine all properties that enable the most demanding transports. The belts are corrosion re-sistant and extremely strong in relation to their low weight.
For special applications, we offer Aramid belts in different designs such as variants that are flame retardant, chemically resistant or particularly heat-resistant. In addition, our belts have very low creep properties.
TECHNICAL DATA
Steel cable belts
Bandwidth 650–2400 mm
Strength classes 500–2500 N/mm
Special designs on request.
TECHNICAL DATA
Steel cable belts
Bandwidth 500–2100 mm
Strength classes 630–3000 N/mm
Special designs on request.
AREAS OF USEpower plants
open-pit mining
mining and salt extraction
coal mines
iron and steel industry
port and terminal technology
AREAS OF USEpower plants
open-pit mining
mining and salt extraction
coal mines
iron and steel industry
port and terminal technology
Thanks to their high energy efficiency, you benefit from lower power consumption of Aramid belts – allowing, among other things, operation with lower power motors.
Whether the Aramid belts are used underground or above ground – they are the key to master the greatest challenges in the field of conveying.
MANUWELL BELTS WITH CORRUGATED EDGESVersatile use on all transport routes from 0 to 90 °
Whether for light, medium or heavy equipment – manuwell conveyor belts are characterized by high flexibility. They are suitable for all lines and even allow steep-angle conveyance with a gradient angle up to 90 °. This is made possible by a precise coordination of belt body, corrugated edge profile and carrier profile.
Technical details
• Belt bodies with plies made of polyester/polyamide or steel cable
• Corrugated edges in cut-resistant and abrasion-proof quality
• Carrier profile in cut-resistant and elastic quality
ADVANTAGEScustomized technical design possible
steep-angle conveyance with a gradient angle up to 90 °
fewer transfer points
long service life
low energy consumption
low maintenance
low-noise transport
low space requirement
MAGNETIC SEPARATOR BELTSPowerful protection against material penetrations
Stricker‘s magnetic separator belts are used in refuse separa-tion and composting as well as in recycling of construction site rubble and in general conveying of bulk material – areas of use which place enormous demands on conveyor belts.
Hot vulcanised breaker plates, which have been reinforced with Aramid cords, provide a highly effective long-lasting protection against material penetrations in our magnetic separator belts.
Furthermore, the stable carriers in case of wear and tear can be easily replaced without replacing the entire belt.
Technical details
• Polyester/polyamide belt body
• Reinforced TK carriers (renewable)
• Breaker plates with reinforcement made of Aramid cords
AREAS OF USErecycling plants
sorting plants
mining
SPECIAL BELTSSpecialized in the extraordinary
For particularly special transport tasks even the best standard belt does not provide the suitable result. For these cases Stricker has tailored high quality special belts in the portfolio – tailored to the individual needs in the industry.
For example, our Ripstop Belt ensures optimal conveying results even under unfavourable conditions. Straight sharp-edged transport material can cause longitudinal cracks and penetrations in the belts. To prevent this, we have equipped it with a cut protection insert – a breaker.
Whether in normal or transverse stable variant – Stricker‘s Supergrip Belts ensure that even then bulk goods are securely transported and won‘t slip. This is made possible by a surface finish, which was specifically designed for these belts and has a surface structure with a lot of grip.
Our food-compliant belts are predestined for use in the food industry, for example for the transport of sugar. They also play a vital role in the production of varnishes and paints. Of course, our belts are all FDA compliant.
We gladly support you in the designing special belt types.
AREAS OF USE OF RIPSTOP BELTSiron and steel industry
foundries
stone quarries
cement plants
AREAS OF USE OF SUPERGRIP BELTSairports
amusement parks
beverage industry
timber transport (e.g. wood chips)
parcel centres
passenger transport
24h- SERVICE +49 251 3288-0
ASSEMBLY AND SERVICEWe are available to service you 365 days of the year
To ensure your conveyors systems are always ready for use, we are available 365 days a year.
We are happy to provide also the regular inspection and maintenance of your systems. Maintenance contracts assure optimum availability of your production facilities at low operating costs.
Find out about the quality of our products, our consultation and our service. Call us or write us an e-mail. We would be happy to advise you.
DEVELOPMENT AND PRODUCTIONFirst-class products and customized solutions
Stricker is a reliable partner when it comes to minimizing downtime of your production facilities. Therefore, we are happy to provide the professional installation, maintenance and optimization of your conveyor systems.
Together with you, we develop products that are tailored to your specific needs. Experienced engineers and technicians create system-specific performance calculations to meet your individual requirements. To provide you permanently a perfect service and competitive products our production facilities are being continually adapted and developed.
PIPE CONVEYOROptimum protection for material and the environment
The Stricker pipe conveyor is conveyor belt and protection cover in one. As tubular, completely enclosed conveyor system it provides a dust and spill-free transport throughout the entire route. Thereby you protect your material from the environment – and vice versa.
Stricker‘s pipe conveyor was designed for particularly difficult terrain conditions. Due to its flexibility, it is the perfect solution for every transport route in horizontal and vertical curves. In addition, thanks to its efficient design it reduces the space requirement by up to 60 %.
Our pipe conveyor can also lower the cost. Especially companies with high environmental protection requirements avoid heavy investments in the infrastructure. And since no material loss occurs during transport, more profit remains at the end.
AREAS OF USEpower plants
cement plants
chemical industry
fertilizer industry
OUR SERVICES24-hour assembly service, 365 days a year
endless splicing of conveyor belts using the hot and cold vulcanisation process
mechanical connections
maintenance of conveyor systems
rubber coating of drums
wear protection liners
conveyor belt cleaning and centring
system optimization
maintenance work on your conveyor belt systems
on-site technical advice
SP-GT-RCBRQFDCT-01-0001-EN
Stricker GmbH und Co. KG An der Kleimannbrücke 4
48157 Münster
Phone: +49 251 3288-0 Fax: +49 251 3288-129
[email protected] www.stricker.ms