RELIABLE EQUIPMENT 132

TO ORDER CALL: 800-966-3530 OR FAX: 215-357-9193

RELIABLE EQUIPMENT Tooling solutions for the power utility industry.

132

AUDIO/VISUAL VOLTAGE DETECTORFor overhead A.C. voltages from 24DV to 500kVVerify Live or De-energized Conductors.Each tester comes complete with batteriesand a splined universal end fitting.It is recommended that the tester be movedprogressively closer to conductor orapparatus unti l warning of voltage isindicated or until it touches the conductor orapparatus.

Part Dimensions Settings

4244 11" x 3.5" Off/240V/4.2kV/15kV25kV/35kV/69kV/230kV

4344 11" x 3.5" Off/240V/4.2kV/35kV/69kV115kV/230kV/345kV/500kV

4356 Complete kit - 4244 unit, case and adaptor

4367 Complete kit - 4344 unit, case and adaptor

4315Storage Case

4244 - VoltageDetector

4315ShotgunAdapter

REL-TIF 300HV TIC TRACER TM

AC VOLTAGE DETECTORSTic Tracers detect the electrostatic fieldgenerated around an AC conductor. Thispermits safe, non-contact voltage detection.The REL-TIF 300hv is the deluxe version ofthe Tic Tracer line. This instrument allowsfor high voltage testing and adds a visualindicator. Adaptable to TIF's Hot Sticks.Perfect for load-break connectors andchecking transmission lines. Low range 30to 1,500VAC, High range for 1,500to 122,000VAC!

TIF - 8800 - LEAK DETECTORSThe TIF8800 series are general purposecombustible gas detectors which may beused where a combustible gas, vapor, orresidue needs to be found.

Features:Unique flexible 15” stainless probeAutomatic warm-upRechargeable Ni-Cad batteriesLow battery indicatorSensitivity Adjust controlAudible "Geiger counter" signalBroad band detectionRecharger and ABSCarry case included

OPTIONALREL-TIF 303 - CARRY CASEREL-TIF 310 - 36” HOT STICKREL-TIF 410 - 48” HOT STICK

TIF-8800

UL ClassifiedMSHA

Approved

TIF-300hv

UL ClassifiedMSHA

Approved



137

Circuit Potential Testing - The digital highvoltage meter may be used to measure highvoltage on cables, including phase to phaseand phase to ground 0-40kV.Voltages up to 240kV can be obtained in 40kVincrements with add on resistors # 6703.

URD Cable Testing - This meter may be usedto determine the insulation integrity of burriedcables with the use of the D.C. HiPot unit.

FEATURES AND BENEFITSDigital display reads directly in kilovolts with three1/2" high digits on sharp contrast liquid crystaldisplay. Readout is given to the nearest 100 volts.Example: A 12,470 volt line phase to phase reads12.5 on display.

The digital display has a lighted backgroundthat can be switched on by the operator duringuse in poor light conditions. The solid statedesign eliminates problems associated withanalog type meters.

The unit is powered by a 9-volt battery and isfield replaceable. If a low battery conditionexists, it will be indicated on the display.

The 16” coiled cable is 10’ when fully extended.

The rugged plastic case 19" L x 7" W x 5-1/2" Hprovides compact storage and will also accom-modate a pair of add-on resistor extensions.

The meter and coiled cable is attached to two1-1/4" dia. x 16" long fiberglass sticks. Femaleuniversal spines on one end allow attachmenton all universal hot sticks. Two 2” dia. conductorhooks are provided on the other end.

HASTINGS - DIGITAL HIGH VOLTAGE PHASING METER

67020-40kV Digital Volt Meter with conductor hooks.

5.5 lbs.Unit comes complete with carry case, battery and instructions

6703 Pair of Extension Resistors to increase operating range. 1.3 lbs.

5/25kV Loadbreak Bushing Adapter6702-1* *Also fits Elastimold 35KV Loadbreak Bushing. 0.6 lbs.

NOTE: Most testing will require 2 adapters.

6702-335kV Loadbreak Bushing Adapter. (Fits RTE 35kV Bushing Only)

0.8 lbs.NOTE: Most testing will require 2 adapters.

6702-2 Qty. of One (1) D.C. HiPot Adapter for use up to 35kV. 0.5 lbs.

A30119 Storage Case Only 19" L x 7" Wx 5-1/2" H. 2.1 lbs.

67110-40kV Tester Kit - Incl: # 6702 Digital Volt Meter (description above),

10. lbs.Two 6' x 1-1/4" dia. universal fiberglass poles and vinyl storage bag.

PHASE TELL

PATENT NO. 5,136,234

Liquid Crystal Display

#6703 Ext. Resistor

#6702-1Bushing Adapter

#6702-3Bushing Adapter

#6702-2 DC HiPot Adapter



138

Overhead Voltage-Presence Test canbe performed byall models.

Switch on C403-0979* includes Test Points.

C403-0979* C403-1029 or C403-1140

*For testing URD elbows with test points,only model C403-0979 on this page includesstraight probe and "TP" setting on selectorswitch (as well as hook for overhead uses).

Since the MRVD is not a voltmeter, no specificaccuracy is claimed by the manufacturer or canbe assumed by the user.

MULTI-RANGE VOLTAGE DETECTORSFor Overhead Systems to 600 kV andURD Elbow Test Points*Used to confirm that a line is de-energizedprior to performing maintenance on it, theMulti-Range Voltage Detector (MRVD)presents field practicality. Actually a fieldintensity meter, the MRVD is calibratedto read approximate line-to-line voltagewhen connected to any phase conductor.It responds to the magnitude of the fieldgradient between its end probe and floatingelectrode (at the universal hotstick attach-ment fitting). If the universal fitting is close toa ground, another phase, or another voltagesource, the reading should tend to be high;if its close to a jumper or equipment of thesame phase, the reading should be low.

The MRVD metered readout is capable ofdistinguishing actual line voltage fromstatic or feedover from an adjacent line.Readings from an MRVD can be comparedwith numerical certainty rather than thesubjective judgments associated with"fuzz-sticking" or "glow-detecting."

Internal circuit and push button permit checkbefore and after each use to confirm oper-ational condition of instrument and battery.

Part No. Scales Weight

C403-0979* 1 - 40 kV 5-1/2 lb.

C403-1029 16 - 161 kV 5-1/2 lb.

C403-1140 69 - 600 kV 5-1/2 lb.

*For testing URD elbows with test points.



141

Dual Range, Audible & Visible Indicators

The instrument blinks and yelps when placed in anelectrostatic field gradient above the trigger threshold.Five flashing red lights aler t the operator, and high-pitched tones signal nearby personnel of presentvoltage that could be dangerous when applyingtemporary grounds or performing maintenance. It canbe used to check overhead lines, in substations,around switchgear, or for underground-systemapplications. I t simply sl ips over the head of astandard 1-1/4"-diameter disconnect stick. It also maybe used on a Chance Grip-All clampstick, universal,telescoping, or positive-grip hot line stick fitted witha M4455-98 special adapter.

Design FeaturesA handy three-way switch permits selection of eitherthe 0 - 100 kV or the 100 - 800 kV range for the circuitbeing tested, and turns off the unit to save the batterywhen not in use. A 9-volt alkaline battery readilyinstalls through a sliding panel without disassembly.A test button checks both the battery and the tester.Depressing the button activates the signal circuits,sounding the tone and lighting the alarm lamps if thebattery is good and unit operable. Each unit comeswith instructions packed in a lined, reinforced casewith carrying handle.

Phase-to-Phase versus Response Distance

kV ( 1-100 kV ) ( 100-800 kV )Distance Distance

2.0 .............................. 0"13.8 ............................ 4"25.0 ........................... 12"34.5 ........................... 19" ....................... 1"69 .............................. 39" ....................... 3"115 ............................ 56" ....................... 7"161 .......................................................... 10"230 .......................................................... 20"345 .......................................................... 26"525 .......................................................... 44"

Part No. Description Weight

H1990-ST Super Tester, Battery, Wood Case 4-3/4 lb.

M4455-98 Super Tester Adapter for Grip-All 9 oz.Universal, Telescoping or Positive-Grip hotline tools.

M4455-98 fits tester eitherway, so it may be used onGrip-all clamp-stick, as wellas on a splined fitting of theUniversal, Telescoping, orPositive-grip hot-line sticks.

H1990-ST - SUPER TESTER VOLTAGE DETECTOR

Documents

RELIABLE EQUIPMENT 132