Upload
buidat
View
215
Download
0
Embed Size (px)
Citation preview
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 1 of 14
Reliability Test Report
HW status
Panasonic number SW status
Customer Part No.
Test
No.
Initial Performance tests before Reliability Tests
1. MSL MSL3 Moisture sensitivity Test
2. TC Temperature Cycling Test @ -50/+125°C; 500 cycles
3. LTST Low Temperature Storage Life Test @ -40°C / 1000 h
4 HTSL High Temperature Storage Life Test / HTSL @ +125°C / 1000 h
5 THB Temperature Humidity Bias Test @ +85°C / 85%rH / 1000 h, monitored
6 VT Vibration Test @10-55-10 Hz / 1min., 2h each direction
7 DT Shock Drop Test from a height of 1m, 10 times - each side
8 HTOL High Temperature Operating Life Test @ -85°C Vcc = max. / 1000 h
9 ESD ESD Test HMB JESD-22a-114D (C=150 pF; R=330 Ω)
Final Performance tests after Reliability Tests
Test Result
Conclusion
Issue Date Approval: X
Conditional Approval: -
Failed: -
Panasonic Industrial Devices Europe GmbH Design Evaluation Group (DEG)
Zeppelinstr. 19
21337 Lüneburg Tel.: +49(0)4131-899-154
Germany
O. Jahnke
ApprovedPrepared
02.09.2013 06.09.2013
V. Bay
Test Overview
BlueRadios BR-LE4.0-D2A
The reliability tests were made on the BlueRadios module
- ENW89832A6KF, BR-LE4.0-D2A, Dual Mode -
and no problems were recognised.
OK
OK
OK
Result
OK
OK
OK
Products type 01Wireless Module
3.3.0.0-D2ENW89832A6KF
Name of the test
OK
OK
OK
06.09.2013
OK
OK
All tests PASSED
Front Page
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 2 of 14
Monitoring
no
P-Level Performance Test
Temperature
RT
MSL LTSL HTSL HTOL
Monitoring
no
Monitoring
Yes
Monitoring
no
Monitoring
Yes
Temperature
RT
Temperature
RT
Temperatur
e
RT
Temperatur
e
RT
Q-Level Performance Test Q-Level Performance Test Q-Level Performance Test Q-Level Performance Test
TC THB VT DT
Monitoring
no
Monitoring
Yes
Monitoring
no
Monitoring
no
Temperature
RT
Temperature
RT
Temperatur
e
RT
Temperatur
e
RT
Q-Level Performance Test Q-Level Performance Test Q-Level Performance Test (after CA) Q-Level Performance Test
ESD
Monitoring
no
Monitoring
no
Temperature
RT
Temperature
RT
Q-Level Performance Test P-Level Performance Test
High Temperature Storage Life Test
+125°C // 1000h
no voltage // no bias // no monitoring
(JEDS22-A103)
(HTSL)
Temperature Cycling Test-50 / +125 °C each 5 min dwell.
500 cycles (15min./cycl. -> 6 days)
PC required prior to test
(TC)
Temperature Humidity Bias Test
+85°C // 85% r.H. // 1000h // monitored
(THB)
Reliability Test flow plan for BlueRadios BR-LE4.0-D2A Wireless Module
Initial Performance Test
before Tests
High Temperature Operating Life TestJESD22-A108C // 1000 h // V=Vcc max //
Tamb. + 85 °C
monitored
(HTOL)
MSL3-Moisture sensitivity level 3
PC = Pre-Conditioning:
a) PC Bake: 24 hours, +125°C
b) PC Soak: 192 h +30°C 60% r.H. or
40 h +60°C 60% r.H.
c) 3 x reflow soldering (BTM profile max +260°C)
J-STD 020
Low Temperature Storage Life Test
- 40 °C // 1000h
no voltage // no bias // no monitoring
(LTST)
Final Performance Test
after Tests
Vibration Test10-55-10 kHz in 1 minutes, 2h in each direction. 1,5
mm Ampl.
(VT)
ESD robustness
HBM model (JESD-22a-114D)
Shock Drop TestDrop parts on concrete
(mounted on special frame for product simulation)
(DT)
Reliability Test Overview
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013
MSL3 and THB - Temperature Humidity Bias Test
TC - Temperature cycling @ +125°C / -50°C @+85°C / 85%rH
HTSL - High temperature storage and HTOL - High temperature Load Life and
DT - Drop Test VT - Vibration Test Test:
Low Temperature Storage Life Test ESD HMB Test
@ -40°C // 1000h
Barcode:
Positiv
eN
egative
V. Bay
Approved
06.09.2013O. Jahnke
DateJudgementPrepared
ECFE7E11026D
ECFE7E110522
ECFE7E10FAF1
ECFE7E10F9F7
ECFE7E10FADE
ECFE7E10FAEF
ECFE7E10FAA1
ECFE7E10FABC
ECFE7E10FAE9
DEG
ECFE7E10FB0F
ECFE7E1101B5
ECFE7E110522
ECFE7E10F98B
Department
ECFE7E10FA56
ECFE7E10FB14
ECFE7E10FAD8
ECFE7E10FC19
ECFE7E110161
ECFE7E1101BD
ECFE7E10FB25
ECFE7E10FA0D
ECFE7E10F9FB
ECFE7E10FAA1
ECFE7E10FABC
ECFE7E1103B3
ECFE7E10FA0D
ECFE7E11042D
Serial Number
ECFE7E1101E5
ECFE7E110261
ECFE7E11027C
ECFE7E1102DE
ECFE7E11016F
ECFE7E10FC24
Serial Number Barcode:
ECFE7E110226
ECFE7E10FC98
ECFE7E10FA12
ECFE7E10FC98
ECFE7E10FB0F ECFE7E10FAFD
ECFE7E10FAD9
06.09.2013
ECFE7E11027C
list of modules in the tests
BR-LE4.04-D2A
ECFE7E110226
Panasonic Industrial
Devices Europe GmbH
Serial Number Barcode:
ECFE7E10FA12
ECFE7E10F9FB
ECFE7E11026D
Barcode:
ECFE7E110522
Serial Number Barcode:
ECFE7E1103CF
ECFE7E110161
ECFE7E1101BD
ECFE7E1103B3
ECFE7E1103CF
Serial Number
ECFE7E10FA3E ECFE7E10FA3E
Barcode:
ECFE7E10FC01
ECFE7E10FC19
ECFE7E10FAFD
Serial Number
ECFE7E10FADE
ECFE7E10FAE1
ECFE7E10FAEF
ECFE7E10FAF1
ECFE7E10FBBD
ECFE7E1102C1
ECFE7E1102DE
ECFE7E11042D
ECFE7E10FAD9
ECFE7E10FC01
ECFE7E10FAE1
ECFE7E1101B5
ECFE7E10F9F7
ECFE7E10F98B
ECFE7E11022B
ECFE7E1102C1
ECFE7E10FF68
ECFE7E110240
ECFE7E10FC14
ECFE7E10FC92
ECFE7E10FF68
ECFE7E110240
ECFE7E11016F
ECFE7E1101E5
ECFE7E110261
ECFE7E10FBBD
ECFE7E10FC14
ECFE7E10FC92
ECFE7E10FB25
ECFE7E10FC24
ECFE7E10FBE6
ECFE7E11006A
ECFE7E10FBE6
ECFE7E11006A
ECFE7E10FA56
ECFE7E10FAD8
ECFE7E10FAE9
ECFE7E10FB14
ECFE7E1103C1
ECFE7E1101A5
ECFE7E110201
ECFE7E1101A5
ECFE7E110201
ECFE7E1103C1
ECFE7E10FA3E ECFE7E10FA3E
ECFE7E10FA56 ECFE7E10FA56
ECFE7E10FB14
ECFE7E10FBE6 ECFE7E10FBE6
ECFE7E10FAD8 ECFE7E10FAD8
ECFE7E10FAE9 ECFE7E10FAE9
ECFE7E10FB14
ECFE7E110201 ECFE7E110201
ECFE7E1103C1 ECFE7E1103C1
ECFE7E11006A ECFE7E11006A
ECFE7E1101A5 ECFE7E1101A5
Prepared:
V. BayApproved:
O. Jahnke
Module list
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 4 of 14
Prepared:
MSL3 and Temperature Cycling Test V. Bay
@ +125°C / -50°C Approved:
Panasonic Industrial 500cycles (15min. / cycl.) O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequency tolerance CH 0
-40
-20
0
20
40
Initial final
kHz
Idle Current
-0,5
1,5
3,5
5,5
7,5
9,5
Initial final
mA
Transmit power
0
2,5
5
7,5
10
12,5
15
Initial final
dBm
Graph MSL3_Temp cycl
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 5 of 14
Prepared:
Low Temperature Storage Life Test V. BayApproved:
Panasonic Industrial O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
400
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Remark:
Idle mode currents are usually below 1 mA, but sometimes were measured 6 mA.
This 6 mA are still in spec. of max. 10 mA.
@ -40°C // 1000h
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequence tolerance CH 0
-80
-60
-40
-20
0
20
40
60
80
Initial final
kHzTransmit power
3
5
7
9
11
13
Initial final
dBm
Current idle
0
2
4
6
8
10
Initial final
mA
Graphs Low temp storage
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 6 of 14
Prepared:
HTSL @+125°C// 1000h V. Bay
and Shock Drop Test from height 1m Approved:
Panasonic Industrial O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Remark:
Idle mode currents are usually below 1 mA, but sometimes were measured 6 mA.
This 6 mA are still in spec. of max. 10 mA.
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequency tolerance CH 0
-80
-60
-40
-20
0
20
40
60
80
Initial final
kHz
Idle Current
0
2
4
6
8
10
Initial final
mA
Transmit power
3
5,5
8
10,5
13
Initial final
dBm
Graph HTSL and drop test
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 7 of 14
1m height Drop test
BR-LE4.0-D2A
Test:
Drop test with 10 pcs of module BR-LE4.0-D2A ( no. 1 - 10 ) from production in Slovakia on a
mounting block of app. 110 grams for test of soldering concept
Test Conditions:
- Drop parts on concrete ( mounted on special frame for product simulation )
- Height of 100 cm
- Quantity of drops:
a) specified: 3 times one drop in each of the 6 directions (Total 3x6=18 drops)
b) extended target: 10 times one drop in each of the 6 directions (Total 10x6= 60 drops)
- DUT modules are fixed at a special mounting block with a weight of app. 110 grams - see below
Drop machine
Fall direction
modules are fixed on a mounting block
The weight of this mounting block simulates the weight of
the final application equipment at end-customer of 150 - 200g
Department Checked Approved Judgement Date
DEG V. Bay O. Jahnke
Devices Europe GmbH
06.09.2013
Panasonic Industrial
06.09.2013
Prepared:
V. BayApproved:
O. Jahnke
Height of 1,00 m
4
3
1
2
6
5
Drop Test_1m
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 8 of 14
1m height Drop test
BR-LE4.0-D2A
a) Test Result after 3 times 6 drops (18 drops)
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
1 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
6 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
1 2 3 4 5 6 7 8 9 10
Remark:
1 OK OK OK OK OK OK OK OK OK OK These 3 times fall cycles (yellow marked) are the
2 OK OK OK OK OK OK OK OK OK OK minimum requirements what the 10 DUTs have
3 OK OK OK OK OK OK OK OK OK OK to survive without any damages.
4 OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK 1 fall cycle:
6 OK OK OK OK OK OK OK OK OK OK each one fall/drop in the 6 directions = 6 falls/drops
b) Test Result after in total 10 times 6 drops (60 drops) - extended tests
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
1 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
6 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
1 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
6 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
1 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
3 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
5 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
6 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK
1 2 3 4 5 6 7 8 9 10
CONCLUSION:1 OK OK OK OK OK OK OK OK OK OK
2 OK OK OK OK OK OK OK OK OK OK PASSED, no problems3 OK OK OK OK OK OK OK OK OK OK
4 OK OK OK OK OK OK OK OK OK OK Visually were no damages observed and electrical
5 OK OK OK OK OK OK OK OK OK OK function was OK after in total 60 drops.
6 OK OK OK OK OK OK OK OK OK OK
Department Checked Approved Judgement Date
DEG V. Bay O. Jahnke OK
Falling cycle
Fall-
direc-
tion
Module No.
Panasonic Industrial
Devices Europe GmbH
6
Module No.
Module No.
Fall cycle
Fall-
direc-
tion
06.09.2013
9
7
Falling cycle 8
Fall-
direc-
tion
Module No.
Falling cycle 10
Fall-
direc-
tion
Module No.
5
2
4
1
Falling cycle 3
Fall-
direc-
tion
Fall-
direc-
tion
Module No.
Falling cycle
06.09.2013
Prepared:
V. BayApproved:
O. Jahnke
Drop Test_1m (2)
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 9 of 14
Prepared:
MSL3 and Temperature Humidity V. Bay
Bias Test Approved:
Panasonic Industrial @ +85°C // 85%rH O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Remark:
Idle mode currents are usually below 1 mA, but sometimes were measured 6 mA.
This 6 mA are still in spec. of max. 10 mA.
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequency tolerance CH 0
-80
-60
-40
-20
0
20
40
60
80
Initial final
kHz
Idle Current
0
2
4
6
8
10
Initial final
mA
Transmit power
3
5,5
8
10,5
13
Initial final
dBm
Graph_Temp_Humid Bias life
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 10 of 14
Temperature Humidity Bias Test
@+85°C/ 85%rH //1000h // V=Vcc max
MONITORING RESULTS
BR-LE4.0-D2A
These graphs is representative for all DUTs
Conclusion: DUTs passed this test without any performance loss.
There are no voltage- and current interruptions, drop outs or problems visible while the test.
Parameter Deviations after these tests are less than the specified max allowed
deviations
Judgement:
Department Checked Approved Judgement Date
DEG V. Bay O. Jahnke
Devices Europe GmbH
06.09.2013
Panasonic Industrial
06.09.2013
OK
Prepared:
V. BayApproved:
O. Jahnke
Temp_Humid Bias_Monitor
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 11 of 14
Prepared:
HTOL @+85°C//1000h // V=Vcc max V. Bay
and Vibration Test Approved:
Panasonic Industrial O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Remark:
Idle mode currents are usually below 1 mA, but sometimes were measured 6 mA.
This 6 mA are still in spec. of max. 10 mA.
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequency tolerance CH 0
-80
-60
-40
-20
0
20
40
60
80
Initial final
kHz
Idle Current
0
2
4
6
8
10
Initial final
mA
Transmit power
3
5,5
8
10,5
13
Initial final
dBm
Graph HTOL and Vibration
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 12 of 14
High Temperature Operation Life Test
MONITORING RESULTS
@+85°C//1000h // V=Vcc max
BR-LE4.0-D2A
These graphs is representative for all DUTs
Conclusion: DUTs passed this test without any performance loss.
There are no voltage- and current interruptions, drop outs or problems visible while the test.
Parameter Deviations after these tests are less than the specified max allowed
deviations
Judgement:
Department Checked Approved Judgement Date
DEG V. Bay O. Jahnke
Prepared:
V. BayApproved:
O. Jahnke
Devices Europe GmbH
06.09.2013
Panasonic Industrial
06.09.2013
OK
HTOL_Monitor
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 13 of 14
Prepared:
ESD HMB V. Bay
(150pF & 330Ω) Approved:
Panasonic Industrial O. Jahnke
Devices Europe GmbH BR-LE4.0-D2A 06.09.2013
400
Result: OK, Passed
All parameters in spec. after reliability tests.
All Deviations are less than the specified max allowed deviations.
Remark:
Idle mode currents are usually below 1 mA, but sometimes were measured 6 mA.
This 6 mA are still in spec. of max. 10 mA.
Current RX
25
30
35
40
45
50
55
60
65
Initial final
mA
Frequence tolerance CH 0
-80
-60
-40
-20
0
20
40
60
80
Initial final
kHzTransmit power
3
5,5
8
10,5
13
Initial final
dBm
Idle Current
-0,5
1,5
3,5
5,5
7,5
9,5
Initial final
mA
Graphs ESD HMB
ISM IR LG06-13 _BR-LE4.0-D2A_Reliability report_final_Sept 2013 14 of 14
Test: ESD test on 6 pcs of module BR-LE4.0-D2A. Three times on each pin.
Before and after each ESD test electrical test were made
ESD measure equipment ESD measure object
ESD test R - 8.1 conditions:
3pcs ( each pin with (+ 2,0 kV) (150pF & 330ΩΩΩΩ) measurement, until (+ 3,0kV)
3pcs ( each pin with (- 2,0 kV) (150pF & 330ΩΩΩΩ) measurement, until (- 3,0kV)
Comments:
Result: Passed without any problems
Department Approved Judgement DateDEG O. Jahnke
ECFE7E10FA3E
ECFE7E10FA56
Serial Number 3,0 kV
OK
OK
OK
Positive OK
ECFE7E10FBE6
Negative OK OKECFE7E10FB14
Negative OK OK
ECFE7E10FAE9
Positive OKECFE7E10FAD8
Negative OK
06.09.2013
ESD 2,0 kV
Positive
OK
OK
Panasonic Industrial O. Jahnke
Devices Europe 06.09.2013
Prepared:
ESD Investigation Report V. Bay
BR-LE4.0-D2A Approved:
ESD