17
QualiPoc Android 13.1.0 Release Notes August 2013 SwissQual® License AG Allmendweg 8 CH-4528 Zuchwil Switzerland t +41 32 686 65 65 f +41 32 686 65 66 e [email protected] www.swissqual.com

Release Notes - QualiPoc Android 13.1.0

  • Upload
    teajee

  • View
    425

  • Download
    8

Embed Size (px)

Citation preview

Page 1: Release Notes - QualiPoc Android 13.1.0

QualiPoc Android 13.1.0 Release Notes

August 2013

SwissQual® License AG Allmendweg 8 CH-4528 Zuchwil Switzerland

t +41 32 686 65 65 f +41 32 686 65 66 e [email protected] www.swissqual.com

Page 2: Release Notes - QualiPoc Android 13.1.0

SwissQual has made every effort to ensure that eventual instructions contained in the document are adequate and free of errors and omissions. SwissQual will, if necessary, explain issues which may not be covered by the documents. SwissQual’s liability for any errors in the documents is limited to the correction of errors and the aforementioned advisory services.

Copyright 2000 - 2013 SwissQual AG. All rights reserved.

No part of this publication may be copied, distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language without the prior written permission of SwissQual AG.

Confidential materials.

All information in this document is regarded as commercial valuable, protected and privileged intellectual property, and is provided under the terms of existing Non-Disclosure Agreements or as commercial-in-confidence material.

When you refer to a SwissQual technology or product, you must acknowledge the respective text or logo trademark somewhere in your text.

SwissQual®, Seven.Five®, SQuad®, QualiPoc®, NetQual®, VQuad®, Diversity® as well as the following logos are registered trademarks of SwissQual AG.

Diversity Explorer™, Diversity Ranger™, Diversity Unattended™, NiNA+™, NiNA™, NQAgent™, NQComm™, NQDI™, NQTM™, NQView™, NQWeb™, QPControl™, QPView™, QualiPoc Freerider™, QualiPoc iQ™, QualiPoc Mobile™, QualiPoc Static™, QualiWatch-M™, QualiWatch-S™, SystemInspector™, TestManager™, VMon™, VQuad-HD™ are trademarks of SwissQual AG.

SwissQual acknowledges the following trademarks for company names and products:

Adobe®, Adobe Acrobat®, and Adobe Postscript® are trademarks of Adobe Systems Incorporated.

Apple is a trademark of Apple Computer, Inc.

DIMENSION®, LATITUDE®, and OPTIPLEX® are registered trademarks of Dell Inc.

ELEKTROBIT® is a registered trademark of Elektrobit Group Plc.

Google® is a registered trademark of Google Inc.

i.Scan is a trademark of CommScope, Inc.

Intel®, Intel Itanium®, Intel Pentium®, and Intel Xeon™ are trademarks or registered trademarks of Intel Corporation.

INTERNET EXPLORER®, SMARTPHONE®, TABLET® are registered trademarks of Microsoft Corporation.

Java™ is a U.S. trademark of Sun Microsystems, Inc.

Linux® is a registered trademark of Linus Torvalds.

Microsoft®, Microsoft Windows®, Microsoft Windows NT®, and Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries U.S.

NOKIA® is a registered trademark of Nokia Corporation.

Oracle® is a registered US trademark of Oracle Corporation, Redwood City, California.

SAMSUNG® is a registered trademark of Samsung Corporation.

SIERRA WIRELESS® is a registered trademark of Sierra Wireless, Inc.

TRIMBLE® is a registered trademark of Trimble Navigation Limited.

U-BLOX® is a registered trademark of u-blox Holding AG.

UNIX® is a registered trademark of The Open Group.

Page 3: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

2

Contents

1 Introduction ...................................... .................................................................................................... 3

SwissQual Android Firmware ................................................................................................................ 3

Updating QualiPoc Android Application................................................................................................. 3

Devices / Features Matrix ...................................................................................................................... 4

Operation modes ................................................................................................................................... 5

Connect a Freerider Slave to a Freerider Master .................................................................................. 5

Handheld User Interface ........................................................................................................................ 6

Enhanced Freerider Master User Interface ........................................................................................... 7

2 Key Features ...................................... .................................................................................................. 8

Radio Trace (GSM, WCDMA, LTE, CDMA, WiFi) and Layer 3 decoding ............................................. 8

IP Trace and PCAP (logging /decoding) ............................................................................................... 8

Positioning Information (Outdoor and Indoor) ....................................................................................... 9

Forcing (technology, band, preferred UARFCN) ................................................................................... 9

Notifications (live and replay mode) ...................................................................................................... 9

UI Customization ................................................................................................................................... 9

Service Testing (CALL, DATA and MESSAGE) .................................................................................. 10

Job Scheduling .................................................................................................................................... 10

Result Handling ................................................................................................................................... 11

OTA Update ......................................................................................................................................... 11

Replay .................................................................................................................................................. 11

3 Release 13.1.0 (difference to release 13.0.1) ..... ............................................................................. 12

4 Good to Know ...................................... .............................................................................................. 14

Known Limitations ................................................................................................................................ 14

5 End of Support Announcement ....................... ................................................................................ 15

Glossary ............................................................................................................................................... 15

Devices EOS ....................................................................................................................................... 16

Page 4: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

3

1 Introduction

This document contains the release notes for the QualiPoc Android application software 13.1.0

• Release date: 16.08.2013

• QualiPoc Android Version: 13.1.0.24

• SQuad08 Android Version: 13.1.0.25

• SQLookForSync Android Version: 13.1.0.25

• Supported external GPS receivers: Columbus V-900, Qstarz BT-Q818XT

• Compatible NQView Version for remote controlled: 13.1.0

SwissQual Android Firmware

The QualiPoc Android application uses Android firmware that has been modified by SwissQual.

Important: Do not install the official Android operating system and firmware updates. Ensure that the automatic firmware update is disabled. For updating the SwissQual firmware please contact your local SwissQual support.

Updating QualiPoc Android Application

Before you run an update, ensure that the memory card is correctly installed and recognized on your device.

Steps to update QualiPoc Android

1. Connect your Android phone to your computer with a USB cable.

2. On your phone, select the USB connected option.

3. Copy the *.apk file onto your phone, for example, copy the file to /sdcard/QualiPoc/

4. Disconnect the phone from your PC.

5. Open a file manager on the phone and go to the folder that contains the *.apk update file.

6. Start the update application and follow the instructions.

Important: If you cannot run the application, touch Settings on the Application menu, and then enable the Unknown Sources option.

Page 5: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

4

Devices / Features Matrix G

SM

/ W

CD

MA

CD

MA

/ E

VD

O

LTE

WiF

i

Dat

a an

d M

essa

ging

Cal

l2A

nyN

umbe

r

Spe

ech

MO

C D

L

Spe

ech

Dou

ble

End

ed /

Ans

wer

ing

Sta

tion

You

Tub

e V

ideo

Qua

lcom

m R

adio

Tra

ce

Laye

r 3

deco

der

(rea

l-tim

e / o

n de

man

d)

IP T

race

/ P

CA

P d

ecod

ing

Tec

hnol

ogy

/ Ban

d fo

rcin

g

Pre

ferr

ed U

AR

FC

N

GP

S (

Inte

rnal

, B

luet

ooth

)

Map

s (G

oogl

eMap

s, O

penS

tree

tMap

)

Indo

or (

Pic

ture

, Mul

tiflo

or, i

Bw

ave)

Not

ofic

atio

ns (

Rad

io, L

ayer

3, S

yste

m)

Rep

lay

Cus

tom

ized

Mon

itors

Job

and

setti

ngs

Impo

rt /

Exp

ort

Qua

liPoc

Han

dhel

d

Qua

liPoc

Fre

erid

er M

aste

r

Qua

liPoc

Fre

erid

er S

lave

Rem

ote

Con

trol

led

Samsung Galaxy S4

GT-I9505 X - X X X X - - X X X X X - X X X X X X X X - - X

Samsung Note 10.1

GT-N8020 X - X X X X - - X X X X X - X X X X X X X X X - -

SCH-I925 X - X X X X - - X X X X X - X X X X X X X X - - -

GT-N8010 - - - X - - - - - - X - - - X X X X X X X - X - -

GT-N8013 - - - X - - - - - - X - - - X X X X X X X - X - -

Samsung Galaxy SIII

SGH-I747 X - X X X X X X X X X X X X X X X X X X X X - X X

SGH-I747M X - X X X X X X X X X X X X X X X X X X X X - X X

GT-I9305 X - X X X X X X X X X X X X X X X X X X X X - X X

GT-I9305N X - X X X X X X X X X X X X X X X X X X X X - X X

SGH-T999 X - - X X X X X X X X X X X X X X X X X X X - X X

SGH-T999V X - - X X X X X X X X X X X X X X X X X X X - X X

SGH-T999L X - - X X X - - X X X X X X X X X X X X X X - X X

SCH-I535 X X X X X X X X X X X X X - X X X X X X X X - X X

SPH-I710 - X X X X X X X X X X X - - X X X X X X X X - X X

SCH-R530U - X X X X X X X X X X X X - X X X X X X X X - X X

SCH-R530M - X X X X X X X X X X X X - X X X X X X X X - X X

SC-06D X - X X X X X X X X X X X - X X X X X X X X - X X

Samsung Note II

GT-N7105 X - X X X X - - X X X X X X X X X X X X X X - - X

HTC One XL

X325u X - X X X X X X X X X X X X X X X X X X X X - - X

X325s X - X X X X X X X X X X X X X X X X X X X X - - X

Samsung Tab 8.9

GT-P7320 X - X X X - - - - X X X X X X X X X X X X X - - -

GT-P7320T X - X X X - - - - X X X X X X X X X X X X X - - -

SGH-I957 X - X X X - - - - X X X X X X X X X X X X X - - -

SGH-I957D X - X X X - - - - X X X X X X X X X X X X X - - -

Samsung Galaxy SII

GT-I9210 X - X X X X X X - X X X X - X X X X X X - X - - X

GT-I9210T X - X X X X X X - X X X X - X X X X X X - X - - X

SGH-I727 X - X X X X X X - X X X X - X X X X X X - X - - X

SGH-I727R X - X X X X X X - X X X X - X X X X X X - X - - X

SC-03D X - X X X X X X - X X X X - X X X X X X - X - - X

Further supported devices: HTC Raider, HTC Rezound, HTC Amaze, HTC Flyer, HTC Sensation XL

Devices checked as feasible to be supported: Sony Xperia Z, Nexus 10 (Freerider Master only), Samsung SIII (GT-I9305T)

Page 6: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

5

Operation modes

The operation mode could be set in “QualiPoc Settings > Unit Configuration > Operation Mode”. A QualiPoc unit could be used in the following operation modes:

• Handheld

o For details see chapter 2 “Key Feature”

• Remote Controlled

o Unit controlled by NQView

o License option

• Freerider Slave

o Unit controlled by QualiPoc Freerider Master over Bluetooth Piconet

• Freerider Master

o Control up to 7 QualiPoc slave devices over Bluetooth Piconet

o Parallel live data stream on master from all connected slaves over Bluetooth Piconet

o Same monitors available as in Handheld mode plus additional “Slaves” overview monitor and “Freerider Master” monitor.

o Position information (Bluetooth GPS, Internal GPS, Indoor Walkpoint) distributed to all slaves over Bluetooth Piconet.

o Settings synchronization (including indoor plan file) and result transfer over WiFi ad-hoc network

o License option

Connect a Freerider Slave to a Freerider Master

Before connecting a Freerider Slave unit to a Freerider Master you have to define a unique unit name for each unit (QualiPoc Settings > Unit Configuration > Unit Name). The Android Bluetooth name will be set automatic with the same name.

Make discoverable

Make sure that the Freerider Master is in discoverable mode

Select and pair device

After choosing operation mode “Freerider Slave” you have to select an already Bluetooth paired device or scan for a new device and confirm the Android Bluetooth pairing request on both sides.

Freerider Master Freerider Slave

Page 7: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

6

Handheld User Interface

On the upper part of the display the Android notification and status bar, the application title bar, the information banner and the tab host are always visible.

On the middle and lower part of the display one predefined or customized monitors is shown. Several types of monitors are available:

• Value monitor (only values, values and chart mixed, only charts). • List monitors (Log, Cells, Layer3, IP, Events) • Map monitors (Google Maps, Open Street Map, Indoor Plan)

Title bar: Shows actual state and two values Info Banner: Shows up to 10 customized values

Click: Swap values Long Click: Customize title and info banner values

Tab Host: Overview of actual available monitors

Click: Change monitor Long Click on technology tabs: Change actual displayed technology

Menu

Configure and start jobs

Change between live and replay mode

Result handling and result upload

QualiPoc Settings

Help / Abut / Exit

Charts

Zoom and scroll inside the chart Long click: Configure auto scaling

Mixed-Monitor

On Mixed-Monitors the chart values could by selected by clicking on the caption.

List-Monitor

Click: See details of the selected line Double-Click: Change filter visibility

History-Popup

By number-based values a chart of the last 60 seconds is shown, by all other values a list of the 20 last changes is visible.

Android Notification and Status Bar

Toolbar

Idle recording

Freezing

Screenshot

Photomarker

Settings shortcut

Customize value monitors

By value based monitors simple change the order of the values or add new values.

Page 8: Release Notes - QualiPoc Android 13.1.0

Chapter 1 | Introduction CONFIDENTIAL MATERIALS

7

Enhanced Freerider Master User Interface

On Freerider Master the actual state of the slaves is always visible on the title bar and the info banner. The Slaves monitor gives an overview of the activities running on the slaves and allows executing some control actions.

Title Bar: Shows actual slave state and unit name Info Banner: Shows customized slave values and indicate selected slave (blue)

Click: Select slave (on all other monitors the value of the selected slave is displayed) Long Click: Customize info banner values

Test information: Shows the state of the actual running test

Click: Swap between test list view and KPI bar chart view

Slaves values with History-Popup

By number-based values a chart of the last 60 seconds is shown, by all other values a list of the 20 last changes is visible.

Slave state: Shows actual state of the slave

IDLE

IDLE Not Synchronized

SCHEDULED or TRANSFER

RECORDING

DISCONNECTED Selected Slave

Click: Select slave Long Click: Execute slave actions: - Move up / down: Set display order of slaves - Forget (only while disconnected): Slave no longer shown - Synch. Settings (Transfer indoor plan to Slave over Wi-Fi) - Get results (Transfer results to Master over Wi-Fi) - Delete results on slave

Android Notification and Status Bar

Menu

Configure and start jobs

Change between live and replay mode

Result handling and result upload

QualiPoc Settings

Help / Abut / Exit

Page 9: Release Notes - QualiPoc Android 13.1.0

Chapter 2 | Key Features CONFIDENTIAL MATERIALS

8

2 Key Features

Radio Trace (GSM, WCDMA, LTE, CDMA, WiFi) and Layer 3 decoding

The technology monitors (GSM, WCDMA, LTE, CDMA) change automatically when the network technology changes. With a long click on the tab header of the technology monitors (channel, data, cell and coverage) the display technology could be set manual. The WiFi monitor is displayed only by an active WiFi interface.

The layer 3 trace monitor is a list monitor that displays the header information of layer 3 messages. You can disable protocol or message group items in the monitor settings. QualiPoc writes the layer 3 information to the MF independent of the filter settings. The messages could be fully decoded and displayed in a pop-up window. For closing the pop-up just double-click on the pop-up or press the back button.

IP Trace and PCAP (logging /decoding) The IP trace monitor is a list monitor that displays header information from HTTP, FTP, DNS, ICMP, POP3, IMAP, SMTP, RTSP, RTP, TLS and TCP packages. If you want, you can disable protocol items in the monitor settings. Touch an item on the screen to view the decoded package. The logging of a PCAP file is configurable in the job settings.

Page 10: Release Notes - QualiPoc Android 13.1.0

Chapter 2 | Key Features CONFIDENTIAL MATERIALS

9

Positioning Information (Outdoor and Indoor)

For outdoor maps you can use Google Maps in Map or Satellite mode as well as Open Street Maps in Online or Offline mode. When you load a BTS list, you can enable the display of the current BTS position and information.

For an indoor map you can select the image in the gallery or through the file explorer. You can also change the map during a measurement (dynamic map). For multi floor or multi building measurements either an iBwave project (*.ibwc) or a collection of pictures (*.zip) could be loaded.

On both map monitors as default the signal strength is tracked and display. The values could be customized by clicking on the position marker (outdoor map) or a long click on the indoor map.

Forcing (technology, band, preferred UARFCN)

You can force the technology and the bands that device should connect to. The list of available frequency bands depends on the capabilities of the device. One some devices additional a preferred UARFCN forcing is available. Please note that this affects only the UARFCN selection directly after a phone start-up. After settings the UARFCN the phone perform a restart.

Notifications (live and replay mode) Possibility to configure notifications based on layer3 messages or on display values. A standard Android notification is used to inform the user about a new notification. The notification sound or vibration could be enabled for each notification individual. By a click on the event the history at the notification time is shown.

UI Customization

You can configure the workspace, create custom monitors (values, charts, mixed) and configure predefined monitors. With a long click also the title bar and the info banner could be configured.

Page 11: Release Notes - QualiPoc Android 13.1.0

Chapter 2 | Key Features CONFIDENTIAL MATERIALS

10

Service Testing (CALL, DATA and MESSAGE)

With the “Quick Start Settings” QualiPoc allows you to quickly configure the most important job parameters and start the job. Use the “Advanced Job Settings” to configure timing, scheduling, detailed test settings, APN, PCAP capture and job forcing.

Supported single CALL tests:

• Call 2 Any Number

• Speech MOC DL (SQuad08 / POLQA) (license option)

• Answering Station (license option)

• Speech Double Ended (SQuad08 / POLQA) (license option)

Supported single DATA tests:

• FTP DL / UL

• HTTP Browser

• HTTP Transfer DL / UL

• Ping

• Capacity (HTTP) DL (license option)

• Iperf UDP/TCP (license option)

• Email Send and Receive (license option)

Supported single MESSAGE tests:

• SMS Send and Receive (license option)

• MMS Send and Receive (license option)

Supported single VIDEO tests:

• YouTube No Reference (license option)

Supported multiple tests:

• Multi-Data: Sequence of data tests in which all the tests occur in one session

• Multi-Mix: Sequence of data and call tests in which a new session starts for each test

• Multi-RAB: Parallel execution of a call and a (multi-)data test

• Parallel: Up to 3 parallel jobs (one call and multiple single or multi data jobs)

Job Scheduling

When you create a job schedule, the next job in the queue is displayed at the top of the screen. You can view a list of the jobs in the schedule on the notifications screen.

Page 12: Release Notes - QualiPoc Android 13.1.0

Chapter 2 | Key Features CONFIDENTIAL MATERIALS

11

Result Handling

QualiPoc compresses measurement files (SQZ) and uploads MF, SQZ, and crash dump files to an FTP server. The compressing can be enabled per default after each job execution. If you want, you can create a custom folder structure for the files that is based on date, system, device, and task.

Results could also be sent via Bluetooth, Wi-Fi, Dropbox or Email. The available option bases on the availability of the functionality on the device.

OTA Update

With the “Over The Air” update the QualiPoc application can be updated to a new version without connecting the device to a computer.

Replay

Touch the Replay icon on the result page to playback a measurement file. In Replay mode you have the following options:

• Last session (toolbar) • Next session (toolbar) • Pause/Play (toolbar) • Step or fast forward (toolbar) • Session selection (toolbar) • Select new MF (menu)

Page 13: Release Notes - QualiPoc Android 13.1.0

Chapter 3 | Release 13.1.0 (difference to release 13.0.1) CONFIDENTIAL MATERIALS

12

3 Release 13.1.0 (difference to release 13.0.1)

Features • MF tagging (rename MF and rework result page)

o Ability to change parts of the measurement file name. YYYY-MM-DD-HH-mm-ss-TTTT-CCCC-CCCC-DDDD.MF > TTTT: Task ID (actual always “0000”, is not possible to customize) > CCCC-CCCC: Custom ID (8 digits) > DDDD: Device ID (could be set under “QP Settings > Unit Configuration”)

o The custom ID could be set over a tagging framework available on the results page.

o In case the user like to be asked to tag the MF at the end of each measurement the “Auto Tag” feature could be enabled under “QP Settings > Unit Configuration”.

o The MF replay is new reachable directly from the results page.

o On the results page text and time filter option are available.

o

• UI component rework

o To make the QualiPoc easier to use the file picker and the UI of the monitor customization was reworked.

Page 14: Release Notes - QualiPoc Android 13.1.0

Chapter 3 | Release 13.1.0 (difference to release 13.0.1) CONFIDENTIAL MATERIALS

13

• PDP context deactivation forcing

o It is now possible to enable the PDP context deactivation / activation forcing for data tests.

o The context deactivation / activation forcing is done by disabling / enabling the android settings “Mobile data”

o In case of an enabled PDP context deactivation forcing the PDP context is detached at the beginning of a measurement (IDLE session). By each DATA session start the PDP context is attached and at the end of the DATA session the PDP context is detached. At the end of the measurement the PDP context is enabled again (IDLE session).

• Inter / Intra Frequence Neighbour Cell Information

o Possibility to add list of WCDMA and LTE Intra and Inter Cell Information to a customized monitor.

o The information is decoded in real-time from layer 3 messages.

Improvements • Remote Controlled: Avoid Poll (FTP) traffic within a running job

• Remote Controlled: Unit Feedback communication (alerts, result summaries)

• QP Freerider: slave restart / power off from Freerider Master

• Job Sequence: Support saving, editing, duplicating and loading of job configuration

• Support APN settings on Android 4.2 devices

• Support ping interval of 10ms [also 13.0.1.28]

• Improved SMS Back to Sender testing [also 13.0.1.31]

• Improved Indoor testing [also 13.0.1.28]

Page 15: Release Notes - QualiPoc Android 13.1.0

Chapter 4 | Good to Know CONFIDENTIAL MATERIALS

14

4 Good to Know

• QualiPoc requires a valid licence key in the following location on the SD card: /QualiPoc/Settings/<IMEI>.key

• Android applications cannot access the SD card in USB mode. As a result, several QualiPoc functions are unavailable in USB mode.

• QualiPoc does not update WCDMA Cell ID in dedicated mode. Use a BTS list to update the Cell ID in dedicated mode.

• BTS lists must be in CSV format on the SD card. For each technology (GSM, WCDMA, LTE) a separate CSV is needed. Each row in the CSV file corresponds to a cell and must have the following format:

o GSM: Cell-Name,Technology,BCCH,BSIC,Lon,Lat,MCC,MNC,LAC,CellId,Direction

o WCDMA: Cell-Name,Technology,UARFCN,PSC,Lon,Lat,MCC,MNC,LAC,CellId,Direction

o LTE: Cell-Name,Technology,EARFCN,PhyCID,Lon,Lat,MCC,MNC,TAC,CellId,Direction

• For MMS testing it is recommended to disable automatically retrieve of multimedia messages (Android Messaging >> Settings).

• The SwissQual firmware version could be checked in the about menu. Android firmware updates from device manufactures are not allowed.

• On Samsung Exynos based devices (GT-I9305, GT-N7105, …) the noise reduction (Call Settings > Additional settings) has to be enabled to prevent audio gain issues.

Known Limitations

• Remote Controlled : Communication to a HTTP/HTTPS server and communication over WLAN are not supported.

• Remote Controlled : Unit feedback is not yet available on NQWeb System Inspector.

• By playing videos on Android 4.0.4 devices the frame around the video overlaps with the title bar.

• In case of enabled Android Settings “Do not keep activities ” under “Settings/Developer Options/Apps” the QualiPoc application exits as soon as the QualiPoc settings are opened.

• During call tests on Samsung Exynos based devices (GT-I9305, GT-N7105, …) no system sounds where played

Page 16: Release Notes - QualiPoc Android 13.1.0

Chapter 5 | End of Support Announcement CONFIDENTIAL MATERIALS

15

5 End of Support Announcement

This chapter announces the End of Support for Test Devices.

Note: If you require extended support as part of a maintenance contract renewal, please do not hesitate to contact your SwissQual Sales representative to work out the best solution.

Glossary

Term Definition

Item Software releases, test devices, third party software and hardware as well as any other software and hardware component that form SwissQual AG products.

Release Date Date when the item officially becomes available to SwissQual customers. Unofficial Alpha and Beta releases can be delivered under special conditions; however, such releases will only be identified by build or version numbers and not by official release dates.

EOS End of Support Date after which SwissQual stops the official support for the item. If requested, SwissQual may be able to offer extended support for EOS items with a special maintenance contract to guarantee ongoing on-line and telephone support from the SwissQual Support desk. The EOS announcement date represents the date when SwissQual stops selling the item.

Release EOS (All SwissQual products)

Date after which SwissQual stops the maintenance of the software release, that is, bug fixes, change requests, enhancements, and documentation updates will no longer be offered.

Device Software EOS Date after which SwissQual stops the software support for the device, that is, you may not be able to configure or use the device in a future software release.

Device Hardware EOS Date after which SwissQual stops the hardware support for the device, that is, SwissQual will not repair or replace the device. However, SwissQual does maintain a supply of EOS hardware devices for valid maintenance contracts.

Software Component EOS (Feature, Test Option, Third Party Software)

Date after which SwissQual stops the support of a software component, that is, you may not be able to configure or use the component in a future software release.

Page 17: Release Notes - QualiPoc Android 13.1.0

Chapter 6 | CONFIDENTIAL MATERIALS

16

Devices EOS

The following devices are affected.

Device

Software EOS Hardware EOS

Announced Release

End of support date

Date

Samsung Galaxy SIII

(SGH-I747) 13.1 July-31-2014 July-31-2013

Samsung Tablet 8.9 LTE

(GT-P7320) 13.1 July-31-2014 July-31-2013

Samsung Tablet 8.9 LTE

(GT-P7320T) 13.1 July-31-2014 July-31-2013

HTC One XL (X325u) 12.1 Jan-31-2014 Jan-31-2013

HTC Sensation (Z710e) 12.0 Dec-31-2013 Dec-31-2012

HTC Desire 11.2 Nov-30-2013 Jun-30-2012

HTC Desire S (S510e) 11.2 Nov-30-2013 Jun-30-2012

HTC Desire Z 11.2 Nov-30-2013 Jun-30-2012

HTC Inspire 4G 11.2 Nov-30-2013 Jun-30-2012

HTC Vivid (PH39100) 11.2 Nov-30-2013 Jun-30-2012

HTC Velocity 4G (X710s) 11.2 Aug-31-2013 Aug-31-2012

HTC Desire HD (A9191) 11.2 Aug-31-2013 Aug-31-2012

Sony Ericsson Xperia arc LT15i (EU) 11.2 Aug-31-2013 Aug-31-2012

Sony Ericsson Xperia arc LT15a (NA) 11.2 Aug-31-2013 Aug-31-2012