05/24/2012 1. Face AE function for XP/Vista/Win7/Win8 05/30/2012
Follow Face AE frame spec. as below a: Line Width: 4 pixel b:
Square distance: 2 times of eye distance c: In the period of 10
seconds from preview start, show frame if face has been d
istinguished 2. Reduce the delay time of AE stability from 7.5sec
to 5 sec when Face is out o f windows 3. Improve AE stability when
light is turn on and off switch 06/27/2012 1. 2. 3. 4. 5. Modify
selective suspend procedure and control Add protection precedure
for DTM testing support 34 languages in installation Add PID: B35C
and VID: 04F2 Add PID: 029D and VID: 5986
07/04/2012 1. Add frame for MJPEG format 2. Improve AE unstable
issue when face disappear and appear switch 3. Change Chicony PID
VID: 04F2, B35C to 04F2,B37C 4. In the period of 10 seconds from
preview start, show frame if the Face been d istinguished 8/8/2012
1. Fix the Garbage issue in WIN8 Metro AP preview and AMD platform(
Platfrom issue) 2. Modify selective suspend procedure to fix blue
screen issue under WIN8 DTM testing ( system - sleep and PNP
(disable and enable) with IO Before and After (Platfrom issue) 3.
Modify driver memory managerment for WIN8 DTM( Platfrom issue) 4.
For Face AE, When AE target is low than 0x60 under low light, The
Face AE dri ver will increase the target to make Face detection
possibility 5. Add delay in selective suspend procedure to fix DTM
" USB internal device idl e" issue ( Platfrom issue) 8/24/2012 fix
below issues 1. Get BSOD 0xd1 when open YouCam after cold boot 2.
Get BSOD 0x133 when close YouCam after cold boot 3. Camera APP(
build Win8 9200) get no image issue after resume ( S3) 10/23/2012
1. In the period of 3 seconds from preview start, show frame if the
Face been di stinguished 2. FaceAE function default value is off 3.
Add PID: B3BD and VID: 04F2 4. Camera APP( build Win8 9200) get no
image issue after resume ( S3) 5. Sleep and PNP (disable and
enable) with IO Before and After (Certification) t est failed on
BSOD
Monitor VM331STI commands are in conflict with System KS ***
It's not our driver problem as below**** When testing DTM (Win8
9200), The BT get failure and fail cause is BT device missing when
Microsoft testing program create file (BT). In order to prevent BT
device from getting this failure, we modify "VM331STI" procedure
not to enumerate camera device after resume. 12/20/2012 1. Add "
Auto Anti flicker" function for WinXp/Vista/Win7/Win8 12/25/2012 1.
default is flicker auto 1/16/2013 1. Lenovo Camera setting APP get
no image issue after resume (S3/S4) 2. It shows " error message"
when open Amcap and then open TWAIN AP Per Lenovo requirment, The
error message change to " Device is locked by another application "
3/1/2013 1. No need to save " Face AE" value to driver table when
user select Face AE on. 2. Fix XP issue "System would hang at
rebooting after update the Camera Driver" 3. Fix error message
issue ( flash fail ) when using burn tool
