Relay Panels - Strand Lighting System... · 12 Circuit Relay Panel 24 Circuit Relay Panel ... Management sensors installed will report load status and ... 76969 Circuit Breaker, 1-pole,

Features● Recessed or surface-mount relay panel

● Individually fed branch circuits or 3-Phase MLO power options

• cCSAus Listed

• Space for 12, 24, 36 or 48 relay poles per enclosure

• Single and Double pole relays rated for 20 amps 120, 230, 277, and 347 volts

• Vision.net control station support

• DMX512 Input

• Optional ShowNet Ethernet

• Astronomical clock

• Active Power Management is an available option on all Contact relay panels with integral circuit breakers

• Local control of all relays

• Password protected LCD screen and pushbuttons makes easy system configuration, or configure via your personal computer

• Master - Slave operation one rack processor can run up to 96 relays or dimmers

• Cabinets may be linked to A21 dimmer racks to provide a fully integrated solution

• Barriers available for systems fed from breaker panels to allow for 120/277 volt feeds

SPECIFICATION SUBMITTAL

CONSULTANT: PROJECT NAME:

DATE: PROJECT NUMBER:

MODEL NUMBER | QUANTITY:

APPROVED BY:

Strand Lighting Controls

Contact Relay Panel

Relay PanelsContact Relay Panels come in four panel sizes for 12, 24, 36 and 48 relay variants. Contact Relay Panels are ideal for a wide range of control and energy management applications.

The system’s integrated clock provides full astronomical time control for hundreds of events with full day-of-the-week and calendar scheduling. The integrated flash warn feature provides visual warning of any timeclock control action.

Contact is easy to set up and configure with a simple walkaround interface for connecting control stations to relays, as well as a computer-based configurator for advanced installations.

Strand Lighting ControlsRelay Panels

12 Circuit Relay Panel 24 Circuit Relay Panel

36 Circuit Relay Panel 48 Circuit Relay Panel

14.38 in.

0.18 in.

4.00 in.

High Voltage Access Panel

Low Voltage Access Panel

Control Panel

0.18 in.

20.9 in.


Low Voltage Access Panel

Control Panel

0.18 in.

4.00 in.

22.00 in.

23.50 in.

21.90 in.21.50 in.


Low Voltage Access Panel Control Panel

22.00 in.

23.50 in.

0.18 in.

4.00 in.

0.18 in.

34.80 in.


Low Voltage Access Panel Control Panel

0.18 in.

0.18 in.

4.00 in.

23.50 in.

22.00 in.

34.80 in.

Strand Lighting Active Power Management Technology

Contact Relay panels with integral breakers support Active Power Management technology. Relays with Active Power Management sensors installed will report load status and may have a maximum load set on a per relay basis in one amp increments. Active Power Management can be installed in blocks of four relays.

Active Power Management allows designers to securely set limits on circuits to meet watts per square foot requirement on track l ight ing and other c i rcui ts to meet energy conservation codes. Once a circuit has a load limit set at commiss ion ing the l imi t cannot be changed. Load monitoring and status reporting is also a standard feature of Act ive Power Management a l lowing a fac i l i ty to dynamically monitor and adjust lighting loads.

Strand Lighting Controls

Main feed to relay panels Micro Circuit

Breaker Panels

Lighting Control without Active Power Management

Lighting Control without Active Power Management

2-Wire Branch Circuit Terminations

Contact Relay Panels 72Micro Circuit Cabinets 144Track Lighting 72

Total Terminations 288Contact Relay Panels

Main feed to relay panels

Lighting Control with Active Power Management

Lighting Control with Active Power Management

2-Wire Branch Circuit Terminations

Contact Relay Panels 72Track Lighting 72

Total Terminations 144Contact Relay Panels

Vision.net Stations and Sensors

Relay Panels

Connecting Contact to our popular range of Vision.net controls will allow system

designers to create and operate easy-to-use lighting systems that fully integrate local

control with occupancy sensors and photo cells.

Ordering InformationCat No. Description

Philips Strand Lighting

Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2011Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Room 6-10, European Service & Distribution CentreNorthcote, Auckland 0627 20/F Delta House Marssteden 152New Zealand 3 On Yiu Street Enschede 7547 TDTel: + 64 9 481 0100 Shatin, N.T. Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: + 852-2757-3033 Tel: +31-53-4500424 Fax: + 852-2757-1767 Fax: +31-53-4500425

Contact Relay Panels

Contact Relay Panels - individually fed (1), (3)

76910 Relay Insert Panel, 12-circuit76911 Relay Insert Panel, 24-circuit76912 Relay Insert Panel, 36-circuit76913 Relay Insert Panel, 48-circuit

Contact Relay Panel Power Modules with 3-phase input and breakers for 120 volt power supplies (1), (2), (3)

76921C Relay Insert Panel with Breakers, 24-way76922C Relay Insert Panel with Breakers, 36-way76923C Relay Insert Panel with Breakers, 42-way

Contact Relay Panel Power Modules with 3-phase input and breakers for 277 volt power supplies (1), (2), (3)

76931C Relay Insert Panel with Breakers, 24-way76932C Relay Insert Panel with Breakers, 36-way76933C Relay Insert Panel with Breakers, 42-way

Contact Relay Panel Enclosures

CONBOX-1 Enclosure for use with 76910 insertCONBOX-2 Enclosure for use with 76911 insertCONBOX-3 Enclosure for use with 76912 / 76913 / 76921C / 76931C insertsCONBOX-4 Enclosure for use with 76922C / 76923C / 76932C / 76933C inserts

Contact Relay Panel Options

Control Options

76960 Master Control Option76961 Auxiliary Control Option (operates with a master panel)74161 Ethernet Control Module76924 UL 924 Kit76990 Barrier Kit

Relay Options

76991 Relay, 1-pole76992 Relay, 2-pole (occupies two slots)

377V Power Supply Option

76952 277/347V Power Supply for control electronics

Circuit Breaker Options

76966 Circuit Breaker, 1-pole, 20A, 120V76967 Circuit Breaker, 2-pole, 20A, 120V76969 Circuit Breaker, 1-pole, 20A, 277V

Notes: (1) When ordering, specify control options and relay types (number of 1 pole or 2 pole). Note, 2-pole relays occupy (and count as) two relay slots. (2) Panels with circuit breakers come with 3-phase mains lugs for power input. (3) Panel inserts only. When ordering, specify relay panel enclosure. See Contact Relay Panel Enclosures for required enclosure type.

061711NA

Strand Lighting ControlsRelay Panels

Contact Relay Panel

Vision.net 4 is a fully integrated suite of architectural lighting controls designed to meet the needs of the most demanding customers. Scalable from a single room to large mult i- building campuses our decentral ized control approach delivers maximum reliability and flexibility.

Designed to integrate with all of our dimming systems, low voltage switching cabinets and DMX drivers Vision.net 4 can control any lighting load with intuitive precision.

Strand Architectural Controls

Vision.net 4 7-Inch Color Touchscreen





APPROVED BY:

Features● Next generation scalable architectural control from a single room to a multi-building campus

● Scales from a single space up to 255 rooms in a single system. Systems may be linked to build a system with up to 1000 systems each with 255 rooms

● Distributed intelligence - no central processor required

● Available with push button, slider and touchscreen panels

● Simple computer-based set up and configuration with Vision.net 4 designer software

● Fully scalable to over 1,000 stations

● Occupancy sensors and photocells available

● Designers can easily create rooms, room combinations and easily define stations and buttons

● Vision.net 4 designer provides a simple graphical set up and configuration system for original set up and updates as the needs of a facility changes

● Low-cost Cat 5e wiring

● Touchscreen systems provide connectivity to PaletteOS consoles and dimmer racks for system access and monitoring

● Smart jacks allow portable stations to be customized for each room. One portable can be used in multiple spaces each with a unique configuration.

● 127 channels per room

● Unlimited dimmers per room with patching and DMX512 snapshot support

● 255 stations per system

● Astronomical time-clock and calendar-based events

● Connects to C21, EC21, A21, R21 and Contact systems

● Vision.net 4 to DMX512 module available for DMX512 controlled devices

Vision.net 4 Touchscreen Features● Full-color touchscreens available in a range of screen sizes

● Screens may be easily configured and set up with Vision.net 4 Designer software with USB, serial data, and Ethernet interfaces

● Using our optional ShowNet Ethernet connectivity touchscreens can provide remote access to Strand Lighting Rack Palette, Palette, and Light Palette control consoles, C21, EC21 A21, and R21 dimming systems

● Touchscreens provide system astronomical time-clock and calendar functions

● Portable touchscreens available

● Fully graphical-room combine supported

● A variety of backgrounds and button styles are available to create dynamic easy to use screens

● Wide range of on-screen button and fader options

● Multi-language text support is available along with a large selection of icons allow users to label and inform users

● Web browser available for all network-based stations

● Screen support is available from a variety of clock displays and a stop watch timer for theatrical applications


Vision.net 4 Touchscreen

Touchscreen Set-up Slider/Button View

8'

10'

12'

20'

25'

30'

Field of View: Occupancy Sensor (63059CM)

12'

18'

24'

25'

45'

60'

Field of View: Occupancy Sensor (63059HB) 63063 IR Sensor Programming Remote Transmitter

Vision.net 4 Occupancy Sensors

Vision.net 4 occupancy sensors and photocells provide dynamic lighting control for your facility. Choose from two ceiling-mount occupancy sensors to meet the specific needs of your system. Photocell stations provide a choice of lumen maintenance and daylight harvesting. All settings and features of Vision.net 4 occupancy sensors and photocells are easily programmed - from the ground without the use of ladders - using the IR Sensor Programming remote.


Vision.net 4 Control Station Features● All station buttons and faders are fully programmable

● All stations include integrated processors and may operate as stand-alone systems

● Station set up and configuration is simple

● Configuration software can upload and download station set-up data

● Commands include (but are not limited to):

- Raise/lower

- Preset

- Toggle on/off

- Smart commands allow multiple system commands to be executed from a single button press

- Commands to PaletteOS consoles

● All keypads feature programmable backlighting

● Custom-configurable button and slider stations

● IR Remote port

● Optional IR Remote Transmitter with four-room, four-scene control, master raise/lower, and all on/off

● Available in five standard colors:

Vision.net 4 stations provide a wide range of button and slider stations. Any button can be programmed with a wide range of functions.

Button stations allow for custom engraving and are backlit to show what scene is active.

White Ivory Brown Black Gray

Vision.net 4 Designer● Windows-based configuration software

● Simple point and click operation

● Easy download and upload of station configuration data to an entire system from a single access point

● Built in design tools and system simulators allow users to fully test and simulate their systems

● Drag and drop touchscreen setup


Vision.net 4 Designer set-up screen.

System outputs may be simulated so that you can easily test your design and configuration.

Web browser available for all network-based stations.

Optional remote access to Strand control consoles via ethernet.

Strand Architectural ControlsOrdering InformationCat No. Description

Vision.net 4 Control Stations

Touchscreen Stations

95242A Vision.net 4 7-inch color VGA touchscreen station, light almond*95242B Vision.net 4 7-inch color VGA touchscreen station, black*95242P Vision.net 4 7-inch color VGA touchscreen station, portable in Hammond Case95242SE Vision.net 4 7-inch color VGA touchscreen station, flush, locking enclosure, black95242RM Vision.net 4 7-inch color VGA touchscreen station, rack mount, black

95246RM Vision.net 4 15-inch color VGA touchscreen station, rack mount95246SE Vision.net 4 15-inch color VGA touchscreen station, rack mount, with locking enclosure

* Note, these items require one of the following back boxes:

95243 Vision.net 4 7-inch flush mount back box kit for 95242A or 95242B95244 Vision.net 4 7-inch surface mount back box kit for 95242B

Pre-populated Standard Stations

63303 Vision.net 4 slider station with IR, 3 channel & master, 6 presets, 2-gang63306 Vision.net 4 slider station with IR, 6 channel & master, 6 presets, 3-gang63309 Vision.net 4 slider station with IR, 9 channel & master, 6 presets, 4-gang63321 Vision.net 4 push button station, 1 button, 1-gang63312 Vision.net 4 slider station, 12 channel & master, 7 presets, 5-gang63315 Vision.net 4 slider station, 15 channel & master, 7 presets, 5-gang

Custom Stations

63398 Custom Vision.net 4 station63322 Vision.net 4 push button station, 2 button, 1-gang63324 Vision.net 4 push button station with IR, 4 button, 1-gang63328 Vision.net 4 push button station with IR, 8 button, 1-gangNotes:To make any station portable, add "P" to the part number.IR = Integrated Infrared ReceiverColor Suffix: -White, -Ivory, -Brown, -Black, -Gray

Vision.net 4 stations may be custom configured for your facility by indicating the number of buttons or sliders that are required in each gang position.

Module 1 (1st Gang)Button or Slider

12345678

1234

Module 2 (2nd Gang)Button or Slider

12345678

1234

Module 3 (3rd Gang)Button or Slider

12345678

1234

Module 4 (4th Gang)Button or Slider

12345678

1234



Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2012Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Marssteden 152New Zealand No. 41-49 Kwai Cheong Road Enschede 7547 TDTel: + 64 9 481 0100 Kwai Chung, N.T., Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: +852-2796-9786 Tel: +31-53-4500424 Fax: +852-2798-6545 Fax: +31-53-4500425

030612NA_EUA


Accessories

Occupancy Sensors and Photocells

63059CM Ceiling-mount occupancy sensor63059HB High bay-mount occupancy sensor63060CM Ceiling-mount photocell63063 Remote programmer for occupancy sensors and photocells63065SE AV input/occupancy sensor interface

Vision.net 4 Portable Extension Cables

Note: All table top stations include one 25 ft. cable

95095 Vision.net 4 Portable Extension Cable, 10FT (3M), (A4M-A4F) 95096 Vision.net 4 Portable Extension Cable, 25FT (8M), (A4M-A4F) 95097 Vision.net 4 Portable Extension Cable, 50FT (16M), (A4M-A4F)

Receptacle Stations

63341 Vision.net 4 Smart Jack receptacle, 1 gang*63035 Vision.net 4 RS232 programming station*

* Includes stainless steel faceplate with insert

Vision.net 4 DMX Interface

63054 Vision.net 4 to DMX512 interface

Vision.net 4 Data Cable Splitter

63055RM Vision.net 4 4 way data cable splitter for panel mounting63055SE Vision.net 4 4 way data cable splitter with enclosure

Vision.net 4 Configuration Software

67518 Windows configuration software on CD-ROM

Features● 250 Intensity Channels

● 30 Automated Luminaires

● 2 DMX Ports with 1,024 Outputs

● 1 DMX In Port

● Integrated Moving Light Control with LCD Screen, 10 Softkeys and 4 Encoders

● 24 Submasters with 10 Pages

● Faders can be either Submasters or Playbacks

● Cue Playback with A/B Faders and Load/GO buttons

● DMX512A (RDM)

● MIDI In/Out

● VGA output

● Intuitive Effects Engine

● Traditional Command Line Entry

● Multi-color Bump Buttons

● Front panel USB port for showfile storage

● Rear USB port for desk lamp

● CE marked (Power Supply is ETL/UL)

Strand Control Systems





APPROVED BY:

250ML Lighting Control Consoles

250ML consoles

Portable Control System

This is the perfect desk to introduce you to the world of intelligent fixture control. Built for entry level operation and small to medium sized theatres, the Strand Lighting 250ML console gives you a simple interface, great features and an even better price.

It merges the world of conventional dimmer/channel control using traditional Command Line operation with an easy to use interface for attributed fixtures using a color LCD screen that has soft keys and attribute encoders.

Strand Lighting’s 250ML console can control 250 channels for dimmers and 30 automated luminaires for Moving Lights and LEDs. Your looks can be stored as either Submasters for easy access or Cues for traditional theatre playback.

With the 250ML console’s extensive and editable fixture library, you’ll never be without the tools you need to control your lighting rig.

250ML Lighting Control Console

Strand Control Systems250ML Lighting Control Consoles

250ML Console - Control Features

Power Switch

DMX512A (RDM) Out(2 each)

DMX512A (RDM) InVGA Out(Monitor)

Power Input

Ethernet Port (RJ45)

USB Port

MIDI In/Out

250ML Console - Rear Panel Connections

A B C D F

G

H

I

E

JL K

A. 24 Faders / SubmastersB. Playback MasterC. Programming LCD DisplayD. USB Port (showfile storage, USB key sold separately)E. Main Console LCD DisplayF. Grand Master

G. Black Out ButtonH. Softkeys (10 each)I. Encoders (4 each)J. Programming ButtonsK. A / B Playback Controls (with Go and Load buttons)L. 24 Bump Buttons

Legend


250ML Console - Dimensions

734 mm / 28.9 in 80.1 mm / 3.2 in

324 mm / 12.8 in

29 mm / 1.1 in

Technical SpecificationsElectrical

Supply Voltage: Universal power supply 100-240VAC

Approvals: CE marked, ETL listed with cULus listed power supply

Mechanical

Construction: Rigid folded sheet steel and Flame retardant ABS controls

Operating Temperature: 0° to 40°C ambient (32° to 104°F)

Humidity: 0% - 95% non-condensing

Storage Temperature: 0° to 35°C (32° to 95°F)

Weight: 19.4 lbs (8.8 kgs)

Dimensions (LxWxH): 28.9 x 12.8 x 3.2 in 734 x 324 x 81 mm

Connectivity

1 Ethernet (RJ45) port

1 USB port (Front, Library Storage - USB key sold separately)

1 USB port (Rear, Desk Light Connection - Light by others)

1 VGA (1024 x 768) Monitor Output (monitor not included)

1 DMX512A (RDM) In (XLR5M) port

2 DMX512A (RDM) Out (XLR5F) ports

2 MIDI In / Out Ports (Note, Control, Intensity, On/Off)


Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: + 64 9 481 0100 Kwai Chung, N.T., Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: + 852-2796-9786 Tel: +31 (0) 543-542516 Fax: + 852-2798-6545

DRAFT - NOT FOR RELEASE


250ML Lighting Control Consoles

64351 250ML Lighting Control Console

Includes: All consoles include dust cover, integrated video (VGA) card, universal voltage power supply, USB key drive, LED desk lamp, and quick start guide. Monitor not included.

Peripheral Equipment - Cables

95090 DMX512 Control Cable 25’ (A5F to A5M)96456 Ethernet cable 10’ 10/100BaseT (RJ-45)96459 Ethernet cable 25’ 10/100BaseT (RJ-45)

Accessories

67528 USB Key Drive95207 19-inch Flat Panel Monitor

Ordering Information

Cat. No. Description

Don’t let the small size fool you. Strand Lighting’s 250ML console is big on features. With 250 conventional channels and up to 30 moving lights (up to 40 attributes per fixture) available, you will have plenty of room to grow. Creative looks or scenes can be stored statically with cues or on submasters or you could store them dynamically as chase effects.

With the 250ML console, you get the best of both worlds. Hands on sliders for Submaster control, a 10 key for Command Line entry, traditional Cues for theatrical playback and the moving light area with a 7-inch screen, 4 easy-to-use encoders, 10 comfortable softkeys and quick keys for Fixtures, Position, Color, Beam, Effects and Groups.

You’ll be up and programming in no time with the new 250ML lighting control console from Strand Lighting.

Features● 16-gauge steel strip finished in a textured black-powder coat finish

• Standard connectors include Stage Pin, Twist-Lock® and Edison in flush or pigtail mounting versions

• Our "Z-Fold Tiered Packaging" is designed to accommodate the use of palette jacks and forklifts to transport the connector strip from our factory to your job site. This unique shipment method also assures that your connector strip arrives at your project site scratch and dent free.

• "Z-Fold Tiered Packaging" allows us to deliver a completely fabricated pre-wired connector strip. The installing contractor unfolds the connector strip from the Z-Fold Tier and installs prethreaded splicing kits between each section, and connects the field wiring to the Power Connect Connector Strip terminal box.

• A wide variety of hangers for pipe mount and wall mount applications are available

• 2 Inch high standard vinyl labels standard on one side. Two sided and lamicoid labels are available as an option

• Circuits may be wired to multiple outlets on the connector strip

• Wired with high temperature wire to DIN rail mounted screw terminal blocks

• Pigtail connectors provided with strain-relief bushings

• ETL and cETL listed and labeled

• Custom lengths and configurations are available

Strand Circuit Distribution Systems

Power Connect Connector Strip

Connector Strips





APPROVED BY:

Power Connect Connector Strips from Strand Lighting are designed to provide an electrical distribution system for connecting portable luminaires to your lighting system by placing permanent lighting circuits within your facility.

Based on our proven R21 Powered Raceway dimmer design, Power Connect Connector Strips can be supplied with a variety of flush mounted or pigtail connectors, and can be mounted either horizontally or vertically.


96700-XXXX Power Connect Connector Strip

(Note, “-XXXX” is part of your custom part number)

Brackets

71444 Single Pipe Overhung Hanger Bracket71440 Single Pipe Rigged Hanger Bracket71443 Double Pipe Offset Hanger Bracket71441 Double Pipe Rigged Hanger Bracket71445 Threaded Rod Bracket71442 Wall Mount Hanger Bracket

Clamps / Cradles

95550 Cable Clamp95551 Cable Cradle, Small95501 Cable Cradle, Large

Grid Iron Boxes

97051 Grid Iron Junction Box – 16 Terminals97052 Grid Iron Junction Box – 30 Terminals97053 Grid Iron Junction Box – 40 Terminals97054 Grid Iron Junction Box – 60 Terminals97055 Grid Iron Junction Box – 72 Terminals97056 Grid Iron Junction Box – 100 Terminals

021213NA

Connector Strips Strand Circuit Distribution SystemsGrid Iron Junction Box

KellumsStrain Relief

KellumsSupport Grip

SO Multi Cable

Cable Cradle

Cable Clamp Pigtail Connector Flush Mount Connector

Lighting Fixture Pipe (by others)

Terminal BoxPower Connect Connector Strip Mounting

Bracket

Rigging System (by others)


Dallas New York www.strandlighting.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: + 64 9 481 0100 Kwai Chung, N.T., Hong Kong the Netherlands Fax: + 64 9 481 0101 Tel: +852 2796 9786 Tel: +31 (0) 543-542516 Fax: +852 2798 6545

Note, sample system diagram for illustrative purposes only. Some items shown are by others and not available through or provided by Strand Lighting.

Selecon LED Fixtures





APPROVED BY:

PL House Light LED LuminairesA revolutionary break through in Theatrical and Entertain-ment House L ight ing. Drawing on technology and specific insight, nurtured and developed with in the Philips Entertainment group the PL House Light LED Luminaire offers an RGBW 50,000 hour L70 replacement for 300 and 500 watt halogen house lights.

Being an RGBW LED luminaire the PL House light also aides in the overall lighting design of a production giving designers the control and flexibil i ty to immerse the audience in color.

Features Fully tunable high output RGBW LED light engine

supporting color temperatures from 2300K to 9970K and full color mixing with a maximum output similar to that of a 70 watt metal halide luminaire

High CRI is maintained down to very low light levels (>50 Lux) as the integral dimmer (0 to 100%) reduces intensity with minimal color shift maintaining the selected color balance

Quick selection of Warm White, Cool White and Daylight color presets simplifies matching existing light sources

Adjustable 20° to 45° beam spread

Defined maximum energy consumption with power presets - from 30 watts to full power

LED light engine is comprised of a single chip with RGBW LEDs

Full color mixing for creative flexibility in lighting your display - PL House Light LED luminaire features a broad color gamut with precise color mixing controls

No ultra-violet (wavelengths of less than 400nm) - for UV - A, B or C or the Infrared spectrum (wavelengths of more than 775nm) are emitted by PL House Light LED luminaires

Choice of wireless DMX 512 receiver compatible with Wireless Solutions W-DMX, Lumen Radio Wireless DMX, and City Theatrical Show DMX (all sold separately)

Available with either black or clear (polished) reflectors for new construction or retrofit applications

On-board LCD display and menu system for easy setup and control

Electronic power supply; ETL / cETL approved and CE marked

PL House Light LED Luminaire for New Construction

PL House Light LED Luminaire for Retrofit Applications

Selecon LED FixturesPL House Light LED Luminaire

Beam Diameter 7.26 10.89 14.52 18.15 21.78

Throw Distance 10 15 20 25 30

Central Illumination Foot Candles

Warm White (3,200K) 59 26 15 9 7

Cool White (4,000K) 78 35 20 13 9

Day Light (5,600K) 98 43 24 16 11

40o Beam Spread (Lens Tube at #6)

30o Beam Spread (Lens Tube at #8~#9)

Photometrics (Feet / Foot Candles)

PL House Light LED Engine

PL House Light’s powerful LED engine offers exceptional performance and life. Under normal operating conditions our LED engine has a life expectancy in excess of 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output it is possible that a small percentage of LED’s may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.


Beam Diameter 5.32 7.98 10.64 13.30 15.96 18.62 21.28

Throw Distance 10 15 20 25 30 35 40


Warm White (3,200K) 108 48 27 17 12 9 7

Cool White (4,000K) 150 67 38 24 17 12 9

Day Light (5,600K) 186 83 46 30 21 15 12

Beam Diameter 3.63 5.445 7.26 9.075 10.89 12.705 14.52 16.335 18.15

Throw Distance 10 15 20 25 30 35 40 45 50


Warm White (3,200K) 224 100 56 36 25 18 14 11 9

Cool White (4,000K) 316 140 79 51 35 26 20 16 13

Day Light (5,600K) 376 167 94 60 42 31 24 19 15


Beam Diameter 2.21 3.32 4.43 5.53 6.64

Throw Distance 3.05 4.57 6.1 7.62 9.14

Central Illumination Lux

Warm White (3,200K) 629 280 157 101 70

Cool White (4,000K) 842 375 211 135 94

Day Light (5,600K) 1049 467 262 168 117


30o Beam Spread (Lens Tube at #8~#9)

Photometrics (Meters / Lux)


Beam Diameter 1.62 2.43 3.25 4.05 4.86 5.68 6.49

Throw Distance 3.05 4.57 6.1 7.62 9.14 10.67 12.19


Warm White (3,200K) 1160 517 290 186 129 95 73

Cool White (4,000K) 1617 720 404 259 180 132 101

Day Light (5,600K) 1995 889 499 320 222 163 125

Beam Diameter 1.11 1.66 2.21 2.77 3.32 3.87 4.42 4.98 5.53

Throw Distance 3.05 4.57 6.1 7.62 9.14 10.67 12.19 13.72 15.24


Warm White (3,200K) 2407 1072 602 386 268 197 151 119 96

Cool White (4,000K) 3395 1512 849 544 378 277 213 168 136

Day Light (5,600K) 4046 1802 1011 648 451 331 253 200 162


6.5 in. /165.1 mm

5.9 in. / 149.9 mm

4.5 in. / 114.3 mm

15.0 in. /381.0 mm

8.0 in. /203.2 mm

12.0 in. / 304.8 mm

7.6 in. / 193.1 mm

3.5 in. / 88.9 mm

4.3 in. / 109.2 mm

7.6 in. / 193.1 mm

4.5 in. / 114.3 mm

4.3 in. / 109.2 mm

5.9 in. / 149.9 mm

6.5 in. /165.1 mm

4.5 in. / 114.3 mm

14.6 in. /370.8 mm

7.9 in. /200.7 mm

12.0 in. / 304.8 mm

PL House Light LED Luminaire (New Construction Models)

PL House Light LED Luminaire (Retrofit Construction Models)

Note: Power interconnect cable, between J-Box and luminaire assembly removed for clarity.


Trim Ring / Reflector Assembly

Trim Ring Mounting Assembly

J-Box (for electrical connections)

120W LED Engine

LCD Display Menu System

Note: PLHLRC model shown. Basic features are the same for all models.

Technical Specifications

Electrical SpecificationsSource: True RGBW 120W LED chipOutput: > 2,000 lumens (white light)Operating Voltages: 120 Volts ACFrequency: 50/60 HzCurrent Draw 1.25 Amps (150 Watts)Quiescent Load: 2.4 WattsAmbient Temperature: 0° to 40°CControl: On-board menu / DMX512DMX512 Channels: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode)Standards Compliance: ETL/cETL Listed and CE Marked (NON-IC Rated)*

Mechanical SpecificationsConstruction: Die cast aluminum and molded engineering grade plastic components

Lenses: Precision coated aspheric lensesBeam Spread: 20o to 45o

*Note: PL House Light LED Luminaires are NON-IC (NON

Insulated Contact) Rated fixtures. If insulation is present in an

application where these fixtures are used, a minimum 3-inches of

clearance should exist on all sides of the fixture, and no insulation

may be present across the top of the installed fixture.

021113NA_EUA


Selecon Lighting

Dallas New York 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, Texas 75238 New York, NY 10016 All rights reserved.Tel: (214) 647-7880 Tel: (212) 213-8219 The Company reserves the rightFax: (214) 647-8031 Fax: (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE

Auckland Asia Europe19-21 Kawana Street Unit C, 14/F, European Service & Distribution CentreNorthcote, Auckland 0627 Roxy Industrial Centre Rondweg zuid 85New Zealand No. 41-49 Kwai Cheong Road Winterswijk 7102 JDTel: +64 9 481 0100 Kwai Chung, N.T. Hong Kong the Netherlands Fax: +64 9 481 0101 Tel: +852 2796 9786 Tel: +31(0) 543-542516 Fax: +852 2798 6545


PL House Light LED Luminaires

Retrofit Models (120V Markets)

PLHLRC PL House Light LED Luminaire for Retrofit Installations, Clear (polished) ReflectorPLHLRB PL House Light LED Luminaire for Retrofit Installations, Black Reflector

New Construction Models (120V Markets)

PLHLIC PL House Light LED Luminaire for New Construction, Clear (polished) ReflectorPLHLIB PL House Light LED Luminaire for New Construction, Black Reflector

Retrofit Models (230V Markets)

PLHL230RC PL House Light LED Luminaire for Retrofit Installations, Clear (polished) ReflectorPLHL230RB PL House Light LED Luminaire for Retrofit Installations, Black Reflector

New Construction Models (230V Markets)

PLHL230IC PL House Light LED Luminaire for New Construction, Clear (polished) ReflectorPLHL230IB PL House Light LED Luminaire for New Construction, Black Reflector

Accessories - Sloped Ceiling Adapters*

PLHLSA5 PL House Light LED Luminaire 5o Slope Adapter (Philips Lightolier# 7926-MC)PLHLSA10 PL House Light LED Luminaire 10o Slope Adapter (Philips Lightolier# 7926-MD)PLHLSA15 PL House Light LED Luminaire 15o Slope Adapter (Philips Lightolier# 7926-ME)PLHLSA20 PL House Light LED Luminaire 20o Slope Adapter (Philips Lightolier# 7926-MF)PLHLSA25 PL House Light LED Luminaire 25o Slope Adapter (Philips Lightolier# 7926-MG)PLHLSA30 PL House Light LED Luminaire 30o Slope Adapter (Philips Lightolier# 7926-MH)

*Sloped ceiling adapters are for New Construction Models (PLHLIC and PLHLIB) only.

Accessories - Luminaire DMX Cables

PL1DMXFRJ45 DMX512 cable XLR5 Female to RJ45 12 in. / 305 mm WhitePL1DMXFRJ46 DMX512 cable XLR5 Female to RJ45 12 in. / 305 mm BlackPL1DMXMRJ47 DMX512 cable XLR5 Male to RJ45 12 in. / 305 mm WhitePL1DMXMRJ48 DMX512 cable XLR5 Male to RJ45 12 in. / 305 mm Black

Accessories - Wireless DMX Receivers

PL1WDMX03 Wireless Solutions Wireless DMX512 Receiver, Black**PL1LDMX03 Lumen Radio Wireless DMX512 Receiver, Black**PL1SDMX03 City Theatrical DMX512 Receiver, Black**PLHLWL PL House Light LED Luminaire Wireless DMX Receiver Adapter Plate

**A PLHLWL adapter plate is required for all wireless DMX512 receivers (sold separately).






APPROVED BY:

PLPROFILE1 LED Luminaire

Features• Delivers the performance of a 500 watt profile fixture with a maximum power consumption of 150 watts

• Available in 18 to 34 or 24 to 44 degree beam angles

• Interchangeable lens tray between medium and wide versions

• Slot provided for iris, M-size pattern holder, or third party effect accessory

• Infinite color choice from the RGBW engine and supporting color temperatures from 2700K to 5600K in white

• Homogenized fully mixed color output light, no multiple color shadows

• Ten’s of thousands of hours of life expectancy

• Quick selection of Warm White, Cool White, and Daylight

• User defined on board presets states available to record your color composition

• Color presets simplifies matching existing light sources

• Constant color balance down to very low light levels irrespective of intensity setting

• DMX512 Input/Output with 8 or 16-bit resolution or a simple 3-channel control

• On-board LCD menu for ease of luminaire set up and addressing

• No ultra-violet (wavelengths of less than 400nm) – for UVA, B or C or the Infrared spectrum (wavelengths of more than 775nm)

• Luminaire color: black

• Electronic universal power supply 100-240VAC

• PowerCon In and Through connectors

• Electronic power supply; ETL / cETL approved and CE marked

PLPROFILE1 LED LuminaireThe PLPROFILE1 LED luminaire is a variable beam profile with precise beam control and pattern projection from a high output beam. An innovative combination of LED source technology and precision optical design, the PLPROFILE1 luminaire delivers Philips Selecon’s industry benchmark projection quality in a compact, robust fixture.

A key benefit of the PLPROFILE1 luminaire is that it is no longer necessary to change lamps or color filter. Combining the superior control and light quality of a Philips Selecon Profile with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLPROFILE1 luminaire the obvious choice for pattern projection and stage washes.




Advanced Control

The PLPROFILE1 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses.

Console Control

All PLPROFILE1 luminaires support DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PLPROFILE1 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls now support extended color control and color temperature control to simplify programming and luminaire color matching.

PLPROFILE1 LED Engine

The PLPROFILE1 luminaire’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a potential life expectancy of up to 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output i t is possible that a smal l percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

The PLPROFILE1 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PLCYC1, PLFRESNEL1 and the Philips Vari-Lite VLX luminaires meaning the color experience is simplified across the stage.

1

2

LCD Menu Display

Loca l con t ro l s o f f e r t he ab i l i t y t o access p rese t co l o r temperatures; locally stored custom presets adjust intensity; colors and motorized focus.

1

2

PLPROFILE1 Luminaire Advanced Control

Strand Lighting Light Palette VL

PLPROFILE1 Luminaire LED Engine

Interchangeable lens trays for fast and easy choice of either medium zoom (18-34 degrees) or wide zoom (24-44 degrees) without the use of tools. Lens trays sold separately.

Selecon LED FixturesPLPROFILE1 LED Luminaire

Electrical Specifications

Source: 1 Each, True RGBW 120W LED chip

Operating Voltages: 120 to 240 Volts AC (auto-ranging)

Frequency: 50/60 Hz

Current Draw: 1.3 Amps (115V) / 0.65 Amps (230V) - Maximum load with all LEDs at full RGBW

Power Consumption: 150 Watts (max., RGBW at 100%)

Ambient Temperature: 0° to 40°C (32° to 104°F)

Control: On-Board Menu / DMX512

DMX512 Channels: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode)

Standards Compliance: ETL/cETL Listed and CE Marked

Mechanical Specifications

Construction: Machined aluminum, sheet metal, and molded engineering grade plastic components

Color: Black

Weight: 18.7 lbs / 8.5 kg (luminaire only)

Optical Specifications

Output: > 2,000 lumens (white light)

Beam Angle: 18-34 Degrees or 24-44 Degrees (depends on lens option purchased)


DimensionsFront ViewSide View

664.9 mm / 26.2 in.173.0 mm / 6.8 in.

310.0 mm / 12.2 in.

249.

8 m

m /

9.8

in.

404.

8 m

m /

15.9

in.


Cat No. Description

PLPROFILE1 LED Luminaires

PLZS1-1834-03 PLPROFILE1 LED Luminaire, 18-34 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable*

PLZS1-2444-03 PLPROFILE1 LED Luminaire, 24-44 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable* *Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock).

Accessories - Zoomspot Lenses

15ACAX1834LT Acclaim Axial Zoomspot 18-34 Degrees Lens Tray, Black15ACAX2444LT Acclaim Axial Zoomspot 24-44 Degrees Lens Tray, Black

Accessories - Clamps

SC Selecon Molded Yoke Rated C-ClampMC Mega Claw, Black Anodized

Accessories - Top Box Assembly

PLICB Spare Top Box (Interconnect) Assembly

Accessories - AC Power Input Cables

PC1BE PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end) PC1GP PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector

Accessories - AC Interconnect Cables

PC3PC PLPROFILE1 Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for interconnection between units

Accessories - Luminaire Software Uploader Cable

PLUPLD USB Luminaire Software Programming Kit (for updating or reloading luminaire software only) - includes USB to DMX Dongle, Uploader Program, and Carry Bag

021113_NA_EUA

Selecon LED FixturesPLPROFILE1 LED Luminaire

Infinite color choices from the RGBW engine and supporting color temperatures from 2700K to 5600K in white.

Philips Selecon

Dallas New York www.seleconlight.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE


PLFRESNEL1 LED Luminaire






APPROVED BY:

Features• Delivers the performance of a 500 watt fresnel fixture with a maximum power consumption of 150 watts

• Variable beam angle from 15 to 54 degrees

• Infinite color choice from the RGBW engine and supporting color temperatures from 2700K to 5600K in white

• Homogenized fully mixed color output light, no multiple color shadows

• Ten’s of thousands of hours of life expectancy

• Quick selection of Warm White, Cool White, and Daylight

• User defined on board presets states available to record your color composition

• Color presets simplifies matching existing light sources

• Constant color balance down to very low light levels irrespective of intensity setting

• DMX512 Input/Output with 8 or 16-bit resolution or a simple 3-channel control

• On-board LCD menu for ease of luminaire set up and addressing

• No ultra-violet (wavelengths of less than 400nm) – for UVA, B or C or the Infrared spectrum (wavelengths of more than 775nm)

• Luminaire color: black

• Electronic universal power supply 100-240VAC

• PowerCon In and Through connectors

• Electronic power supply; ETL / cETL approved and CE marked

PLFRESNEL1 LED LuminaireThe PLFRESNEL1 LED Luminaire is a general purpose lighting fixture for theatre, small studio, and display lighting applications. It produces an adjustable cone of light with a soft edge which is easily blended with adjacent beams to provide even i l luminat ion. Using LED source technology combined with a traditional Fresnel lens, the PLFRESNEL1 LED Luminaire delivers Philips Selecon’s industry benchmark quality without the compromising performance of spreader lenses.

A key benefit of the PLFRESNEL1 LED Luminaire is that it is no longer necessary to change lamps or color filters. Combining the superior control and light quality of a Philips Selecon Fresnel with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLFRESNEL1 LED Luminaire the obvious choice for any stage lighting need.




Advanced Control

The PLFRESNEL1 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses.

Console Control

All PLFRESNEL1 luminaires support DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PLPROFILE1 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family controls now support extended color control and color temperature control to simplify programming and luminaire color matching.

PLFRESNEL1 LED Engine

The PLFRESNEL1 luminaire’s powerful LED engines offer exceptional performance and life. Under normal operating conditions our LED engine has a potential life expectancy of up to 50,000 hours, however under worst case operating conditions with the luminaire set to continuous full output i t is possible that a smal l percentage of LEDs may require replacement sooner. The Philips Selecon three-year limited warranty includes our guarantee against premature failure of the LED engine.

The PLFRESNEL1 luminaire uses the same proven LED engine as the Philips Selecon PL3, PL1, PLCYC1, PLPROFILE1 and the Philips Vari-Lite VLX luminaires meaning the color experience is simplified across the stage.

1

2

LCD Menu Display

Loca l con t ro l s o f f e r t he ab i l i t y t o access p rese t co l o r temperatures; locally stored custom presets adjust intensity; colors and motorized focus.

1

2

PLFRESNEL1 Luminaire Advanced Control

Strand Lighting Light Palette VL

PLFRESNEL1 Luminaire LED Engine

Selecon LED FixturesPLFRESNEL1 LED Luminaire

Electrical Specifications

Source: 1 Each, True RGBW 120W LED chip

Operating Voltages: 120 to 240 Volts AC (auto-ranging)

Frequency: 50/60 Hz

Current Draw: 1.3 Amps (115V) / 0.65 Amps (230V) - Maximum load with all LEDs at full RGBW

Power Consumption: 150 Watts (max., RGBW at 100%)

Ambient Temperature: 0° to 40°C (32° to 104°F)

Control: On-Board Menu / DMX512

DMX512 Channels: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode)

Standards Compliance: ETL/cETL Listed and CE Marked

Mechanical Specifications

Construction: Machined aluminum, sheet metal, and molded engineering grade plastic components

Color: Black

Weight: 12.3 lbs / 5.6 kg (luminaire only)

Optical Specifications

Output: > 2,000 lumens (white light)

Beam Angle: 15 to 54 Degrees (user adjustable)


DimensionsFront ViewSide View

444.8 mm / 17.5 in.

341.9 mm / 13.5 in.

249.6 mm / 9.8 in.

208.3 mm / 8.2 in.


Cat No. Description

PLFRESNEL1 LED Luminaires

PLFR1-03 PLFRESNEL1 LED Luminaire, 15-54 Degree Fresnel, Black, with Top Box (Interconnect) Assembly, SC C-Clamp, Safety Cable, and AC Input Cable* *Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock).

Accessories - Barndoors

20BDMF Acclaim Fresnel Barndoor, 4-Way, Black

Accessories - Clamps

SC Selecon Molded Yoke Rated C-ClampMC Mega Claw, Black Anodized

Accessories - Top Box Assembly

PLICB Spare Top Box (Interconnect) Assembly

Accessories - AC Power Input Cables

PC1BE PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end) PC1GP PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Stagepin Connector PC1GTL PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Twistlock ConnectorPC1GR PLFRESNEL1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon with Edison Connector

Accessories - AC Interconnect Cables

PC3PC PLFRESNEL1 Luminaire PowerCon Male to PowerCon Female 2.5 Meter Cable for interconnection between units

Accessories - Luminaire Software Uploader Cable

PLUPLD USB Luminaire Software Programming Kit (for updating or reloading luminaire software only) - includes USB to DMX Dongle, Uploader Program, and Carry Bag

021113_NA_EUA

Selecon LED FixturesPLFRESNEL1 LED Luminaire

Infinite color choices from the RGBW engine and supporting color temperatures from 2700K to 5600K in white.

Note, unit shown with optional barndoor accessory.

Philips Selecon

Dallas New York www.seleconlight.com 10911 Petal Street 267 5th Ave, 4th Floor © Philips Group 2013Dallas, TX 75238 New York, NY 10016 All rights reserved.Tel: +1 (214) 647-7880 Tel: +1 (212) 213-8219 The Company reserves the rightFax: +1 (214) 647-8031 Fax: +1 (212) 532-2593 to make any variation in design or construction to the equipment described. E&OE


Documents

Relay Panels - Strand Lighting System... · 12 Circuit Relay Panel 24 Circuit Relay Panel ... Management sensors installed will report load status and ... 76969 Circuit Breaker, 1-pole,