Relay Application Guide_AREVA

7/16/2019 Relay Application Guide_AREVA

http://slidepdf.com/reader/full/relay-application-guideareva 1/20

Relay Application Guide



2

Introduction

The relays described in this application guide fall into the following categories:

Midos A wide range of self-contained relays each comprising module, case, terminals and cover,conforming to IEC255 and BS142 specifications. All modules are of uniform height (178mm)compliant with IEC297, allowing schemes to be built up from separately supplied Midos relays.

K Range Midos A range of numerical relays featuring communications facilities, programmable inputs and outputs,internal instrumentation and fault records. Disturbance and event records are available when usedwith an external PC. Dual powered versions are available for operation from an insecure acvoltage supply and the line CTs. K Range relays are housed in Midos cases.

L series A range of digital and numerical relays providing comprehensive protection schemes. The relaysfeature communications and instrumentation facilities. They are housed in full width modular cases,

compatible with Midos.

S series A range of static and microprocessor based relays, providing comprehensive protection andsignalling schemes.

Rack A range of static and numerical relays and control equipment mounted in a full 19 inch rackconfiguration.

Din case A range of cases manufactured in accordance with European Standard DIN 43 700.

The remainder of the range is housed in special cases, appropriate to each particular relay.

As a part of the application description, the devices have been given numbers, where applicable. These numbers arebased on the IEEE system, incorporated into the ANSI/IEEE standard C37-2-1956.

Contents

Introduction 2

Substation Control Equipment 3

Event and Disturbance Recorders 3

EHV/HV Feeder Protection 4

Traction Feeder Protection 7

Feeder Protection 7

Auto Reclose 9

Generator and Generator/Transformer Protection 9

Transformer Protection and Control 11

Breaker Fail 12

Busbar Protection 12

Rectifier Protection 13

Capacitor Protection 13

Motor Protection 13

Additional Protection of Synchronous Motors 14General Applications 14

Test Equipment 17

Monitoring and Control 17

Measuring Instruments 17

General Publications 18

Application Guides 18

Software 18



3

Substation Control Equipment

Application Details Product Publication HousingType

Substation MV integrated numerical control system utilising a field bus PSCN3020 N.1.6591 N/A

Control System communications network incorporating:q Self-healing fibre optic LANq

Full graphical representation of the substationq Expandable I/O capability with digital and analogue inputsq Time synchronised event recording with printing facilityq For use with GECA digital relays (K Range)

MV Integrated numerical protection & control system, PSCN3020 N.1.6593 N/Autilising a field bus communication system. OPN

q Self-healing fibre optic LANq Integrated OPN protection modulesq Full graphical representation of the substationq Expandable I/O capability with digital and analogue inputsq Time synchronised event recording with printing facility

EHV, HV Integrated numerical control and supervisory system incorporating SPACE2000 N.1.6749 N/A

q

Multiple MMIsq Flexible centralised or distributed architectureq Control and interlocking of switchgearq Autorecloseq Voltage regulationq Time synchronised event recording with printing facilityq Integrated multiple databases

Remote Substation computer for system monitoring and control. EPA2000 N.1.6918 Rack

Terminal Unit q Full graphical representation of the substation in conjunction with a PCq Expandable I/O capability with digital and analogue inputsq Time synchronised event recording with printing facility

Substation computer for system monitoring, control and data logging S900 45 180 Rackq Full graphical representation of the substation in conjunction with a PC 012 – 103

q Expandable I/O capability with digital and analogue inputsq Time synchronised event recording with printing facility

Event and Disturbance Recorders


Distance to Stand-alone device for measuring distance to fault in km, miles or DLDS3000 N.1.6886 RackFault Locator percentage of line length

Sequential Stand-alone data logger to record and time the sequence of events S900 45180 RackEvent Recorder q 1ms resolution 012–103

q Up to 4032 channelsq Expandable I/O capability with digital and analogue inputsq Time synchronised event recording with printing facilityq Stores up to 2000 events

Stand-alone data logger to record and time the sequence of events EMS2000 N.1.6774 Rackq Up to 1024 channelsq 5ms resolutionq Stores up to 500 events

Disturbance Stand-alone high capacity equipment for the display and analysis of Sorel EPMF N.1.6757 Rack

Recorder disturbances on the power system. Including:q Up to 32 analogue inputsq Up to 64 digital inputsq Up to 16 ac/DC analogue inputs

q Distance to fault locationq External time synchronisationq Expandable I/Oq Sequence component measurements



4

Event and Disturbance Recorders (continued)


Stand-alone high capacity equipment for the display and analysis of TPE2000 N.1.6530 Rack

disturbances on the power system. Including:q 8 analogue inputsq

Up to 32 digital inputsq External time synchronisationq Expandable I/O

EHV/HV Feeder Protection

Application Details Product PublicationHousingtype

Distance protection High-speed numerical distance relay providing up to 5 zones of LFZR R4117 Modularfor extra high protection and a choice of scheme options. Provides Mho phase fault

voltage transmission characteristics with a choice of shaped Mho or quadrilateral earth fault

systems characteristics. The relay has the following standard features:

21 – independent overcurrent element– directional earth fault (DEF) element with scheme options

– circuit breaker failure monitoring

– 8 independent setting groups

– fault location

– instrumentation– fault records– disturbance records

– sequence of events recorder

– K-Bus communications– alternative IEC870 based communications

– software is available to facilitate the setting of the relay

(see software section)

q Single or three phase tripping version with additional input and output LFZR111facilities.

q Spare line relaying version with three phase tripping and Scada

controlled setting group selection. LFZR112

q Three phase tripping version LFZR113

Ultra high-speed full scheme distance relay providing three zone Micromho R5406* Modularprotection. It provides mho phase and earth fault characteristics and a (SHNB)choice of scheme options.

The relay is available with the following optional features:

– three phase or single and three phase tripping

– power swing blocking

– directional earth fault element with scheme options

– mutual compensation for parallel lines– voltage transformer supervision

– lenticular zone 3 to prevent load encroachment

High speed numerical distance relay with four zones of protection with PXLN N.1.6869 Rack

quadrilateral characteristics and a choice of scheme options.

The relay has the following standard features:

– Single or three phase tripping, voltage transformer supervision (VTS),

power swing blocking (PSB).

– Autorecloser– Event recording– Fault locator

The relay has the following options:

– Standard model PXLN3001– Model for double circuit lines PXLN3002



5

* indicates inclusion in product catalogue R4126

EHV/HV Feeder Protection (continued)

Application Details Product PublicationHousingtype

Numerical distance relay with five zones of protection with a quadrilateral EPAC3100 N.1.6873

characteristic and a choice of scheme options.

The relay has the following standard features:

– Single or three phase tripping, voltage transformer supervision VTS.– Instrumentation.

– Four setting groups.

The relay is available with the following options:

– Overload, over voltage and under voltage protection.– Autoreclose– Check synchronising

– Direction earth fault

– Power swing blocking and tripping

– Fault location– Disturbance recording– IEC870-S, K-Bus or VDEW, communications

Distance protection A range of high-speed static/digital full scheme distance relays providing Optimho R4056* Modularfor transmission, single or multiple zone protection. They provide shaped Mho phase and (LFZP)

sub-transmission earth fault characteristics (except where indicated), 8 independent setting

and distribution groups and a choice of scheme options. K-Bus communications aresystems available with the use of an external KITZ03 module (see communications

21 equipment section) or alternatively, IEC870 based communications are also

included. Software is available to facilitate the setting of the relay(see software section).q Selectable quadrilateral earth fault characteristic, single or three phase LFZP111

tripping, voltage transformer supervision (VTS) power swing blocking

(PSB) and options of sensitive directional earth fault element with scheme

options (DEF) and fault locator with instrumentation. For application to

overhead (O/H) lines.– 18 measuring elements

q Single or three phase tripping, VTS, PSB and options of DEF and fault LFZP112

locator with instrumentation. For application to O/H lines.

– 18 measuring elements

q Single or three phase tripping, VTS, PSB and optional instrumentation. LFZP113For application to underground (U/G) cables.– 18 measuring elements

q Single or three phase tripping, VTS and optional DEF and fault locator LFZP114with instrumentation. For application to O/H lines.


q Selectable quadrilateral earth fault characteristic, three phase tripping, LFZP121

VTS and optional fault locator with instrumentation. For application to

O/H lines.

– 12 measuring elementsq Three phase tripping, VTS and optional fault locator with instrumentation. LFZP122

For application to O/H lines.


q Three phase tripping, VTS and optional instrumentation. LFZP123

For application to U/G cables.– 12 measuring elements

q Phase distance elements only with DEF, three phase tripping and ability LFZP131to operate from two phase-phase or 3 limb type voltage transformers(VT). For application to O/H lines.


q Phase distance elements only with DEF, three phase tripping and ability LFZP132

to operate from two phase-phase or 3 limb type VT.

For application to O/H lines.– 6 measuring elements



6



q Single zone relay with three phase tripping and VTS. For back-up LFZP151

protection of O/H lines, transformers, etc.


Distance protection High-speed ful l scheme distance relay providing three zone protection. Quadramho R5580* Modular

for transmission and It provides shaped mho phase characteristics and an option of either mho (SHPM)

sub-transmission or quadrilateral earth fault characteristics. It has single or three phasesystems tripping, voltage transformer supervision, power swing blocking and a21 choice of scheme options.

Static switched distance relay providing four zones of protection. PXLC3000 1.6866 RackThe relay has a circular starting element and resistance characteristics.

The relay has single and three phase tripping, voltage transformer

supervision and a selection of scheme options.

The following optional functions are available:

– Autorecloser

– Power swing blocking– Voltage memory– Transformer saturation detection

Static distance relay providing five zones of protection. PXLP 1.6867 Rack

The relay has a lenticular starting element and reactance characteristics.The relay has single and three phase tripping, voltage transformer

supervision and a selection of scheme options.

The following optional functions are available:

– Independant Zone 2

– Independant Zone 3

– Power swing blocking– Autorecloser

The relay is available in two options:

– Standard PXLP3000

– For double circuit lines PXLP3000-1

Directional Numerical directional comparison protection relays for complete phase LFDC R4078* Modular

comparison and ground fault protection for all types of ehv and uhv transmission lines.For single circuit breaker applications LFDC101For dual circuit breaker applications LFDC102

– Alternative to distance as high speed main protection

– Single or three phase tripping

– Optional distance zone for back up protection– Voltage transformer supervision– Optional directional earth fault

Current differential Numerical biased differential protection for use with a digital LFCB R4054* Modular

87 communication system between feeder ends:

for two ended feeders LFCB102for three ended feeders LFCB103for two ended feeders with dual redundant communications channels LFCB202

Additional versions are available for systems with 11/2 breakerconfigurations:

for two ended feeders LFCB122for three ended feeders LFCB123

for two ended feeders with dual redundant communications channels LFCB222

Differential line Static current differential relay with starting elements utilising I0, I1, DIFL N.1.6836 Rack

protection or I2 overcurrent; V0, V1, or V2 overvoltage; V1 undervoltage;or impedance starting.

For use with a voice frequency communication system between feeder ends:for two ended feeders DIFL3002

with periodic self-checking DIFL3012for three ended feeders DIFL3003

with periodic self-checking DIFL3013



7




Phase comparison Unit protection by phase angle comparison of the P10, P40 R5247 Modular

fault current at both ends of the line, via high frequency carrier.

Signalling Refer to General Applications Section

Traction Feeder Protection


Single phase High-speed distance scheme with mho and offset mho characteristics, R4061 Modular

3 zone distance communications, optional O/H fault locator and instrumentationfor railway lines designed for the protection of ac electrified railway systems.

21 For 50/60Hz systems LFZP141

For 25Hz systems LFZP142

Feeder Protection


Overcurrent and/or K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midosearth fault and definite time characteristics, two setting groups, circuit breaker control

50, 51 and internal breaker failure feature.

Microprocessor based relay with instantaneous elements and a complete MCGG R6054* Midos

range of selectable inverse and definite time characteristics.

Instantaneous overcurrent/earth fault relays - attracted armature MCAG11, 12 R6025* Midos

electromechanical 13

As above with low transient overreach, high drop-off/pick-up ratio and MCAG19 R6035* Midos

high thermal rating.

Sensitive earth fault Static definite time delayed sensitive earth fault relay with 3rd harmonic MCSU R6018* Midos

50 rejection

Earth fault Electromechanical relay for use on cable circuits. Contacts available for

indication alarm purposes.

30 – hand/electrically reset MVAZ06 R8104 Midos

Directional phase Stat ic, single and three phase relays used to directionalise MCGG and METI11, 12 R6003* Midosand/or earth fault MCSU relays 13, 31

67

Directional K Range directional three stage relay with multiple inverse and definite KCEG R6551 Midos

overcurrent and/or time characteristics, two setting groups, circuit breaker control and

earth fault internal breaker failure feature. A dual powered version is available.

67 Instantaneous stand-alone directional earth fault relay METI14 R6099 Midos

Directional earth K Range directional three stage relay with multiple inverse and definite time KCEG112 R6551

fault characteristics, two setting groups, circuit breaker control and internal

67 breaker fail feature.



8

Feeder Protection (continued)


Overcurrent and K Range three stage relay with multiple inverse and definite time KCEG152 R6551 Midos

directional earth characteristics, two setting groups, circuit breaker control and internal

fault breaker failure feature.

50, 51, 67

Pilot wire Static high-speed biased differential relay for use with private or Translay S

differential telephone type pilots with loop resistances of up to 1000Ω/2500Ω with MBCI R6011* Midos

(plain feeders) pilot insulation levels of 5kV/15kV respectively. 15kV isolation is achieved

87 using pilot isolation transformers.

Electromechanical, high-speed biased differential relay. For use with MHOR04 R6042* Midos

private pilots with loop resistance up to 1000Ω and pilot isolation 5kV.

Pilot wire Static relay for supervision of ac pilot circuits and supply.

supervision Suitable for use with MBCI relay. MRTP R6026* Midos

Destabilising and Remote operation of pilot wire feeder protection can be initiated byintertripping destabilising or intertripping via the pilot wires. Destabilising causes

(with pilot wire remote operation when current above differential setting is present.

protection) Intertripping causes remote operation by injecting ac current into the85 pilots and is independent of line current.

Suitable for use with MBCI relay but not when overcurrent starting/check

relay type MCRI is applied.

Destabilising MVTW01 R6027* Midos

Destabilising and intertripping MVTW02 R6027* Midos

Destabilising and intertripping with inverter MVTW03 R6027* Midos

Overcurrent Static instantaneous overcurrent start/check relay. May be used to prevent

start/check relay operation in the event of pilot failure. Can only be used on lines where

(for pilot wire the minimum fault current is larger than the maximum full load current.

protection) Suitable for use with MBCI relay, but not when destabilising/ MCRI R6028* Midos

50 intertripping relay type MVTW feature is applied.

Inrush detection Static relay detects zero period in magnetizing inrush current waveform MCTH R6066* Midos

and initiates blocking relay. It can be used with MBCI for transformer

feeder protection



9


Auto Reclose


Auto-reclose One or two shot, high-speed or delayed, single or 3 phase auto-reclose

79 relays for all feeder protection schemes. Wide choice of logic options

with communications:

– for single circuit breaker application LFAA101 R4076* Modular– for dual circuit breaker application LFAA102 R4076* Modular– for mesh corner applications LFAA103 R4098 Modular

K Range static, single or multi-shot high-speed schemes with communications KVTR R6505 Midos

Static microcomputer based, 3 phase, multi-shot delayed auto-reclose relay. MVTR51 R6057* Midos

MVTR52 R6071* Midos

Check K Range numerical relay which ensures that two systems are sufficiently KAVS R6506 Midossynchronising in synchronism before being connected together by manual or auto-reclose.

25 Static check synchronising relay MAVS R6045* Midos

Combined K Range single or multi-shot auto-reclose schemes with combined KAVR100 R6507 Midosauto-reclose and check synchronising.

check synchronising K Range single or multi-shot, single or three phase auto-reclose schemes KAVR130 R6507 Midos79, 25 with combined check synchronising and communication.

Generator and Generator/Transformer Protection


Integrated The LGPG is a digital integrated protection relay combining the following LGPG R4106 Modular

generator protection functions:

protection relay – generator differential

27, 32, 40, 46 – stator earth fault

51, 59, 60, 67 – neutral displacement81, 87 – sensitive directional earth fault

– voltage dependent overcurrent

– reverse power

– low forward power– negative phase sequence– field failure

– under and over voltage

– under and over frequency

– voltage balanceThe relay has instrumentation, fault and event records, programmable

inputs and outputs, alternative setting group and communication.Disturbance records are available with an external PC.

Differential K Range numerical high-speed biased differential relay with inrush KBCH R6530 Midos24, 64, 87 blocking and internal ratio and vector compensation for the protection of

combined generator and transformer units

Static high-speed, biased differential relay with inrush blocking feature. MBCH R6070* Midos

For the protection of combined generator and transformer units.

Electromechanical, instantaneous relays using the high impedance

circulating current principle for use on generator stator windings.– current calibration MCAG34 R6008* Midos– voltage calibration MFAC34 R6007* Midos

– static MCTI34 R6123 Midos

Overcurrent and K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

earth fault and definite time characteristics, two setting groups, circuit breaker control

50, 51 and internal breaker failure feature. A dual powered version is available.

Microprocessor based relay with instantaneous elements and a complete MCGG R6054* Midosrange of selectable inverse and definite time characteristics.



10

Generator and Generator/Transformer Protection (continued)


Negative phase Static inverse time delayed relay for protection of generators against MCND04 R6115* Midos

sequence damage caused by unbalanced loads.46

Stator earth fault For solidly earthed generators (on lv systems)

50, 51 Microprocessor based relay with instantaneous elements and a complete MCGG R6054* Midosrange of selectable inverse and definite time characteristics.

59 Static neutral voltage displacement relays

For generators using resistance earthing, delta/star step-up transformers:

– inverse time voltage operated MVTD13 R6051* Midos

– definite time voltage operated MVTU13 R6041* MidosThe above relays have third harmonic rejection.

For low resistance earthed generators used with delta/star step-uptransformers: instantaneous current operated.

64 – with third harmonic rejection MCAG14 R6008* Midos

50 – without third harmonic rejection MCAG19 R6035* Midos

Restricted earth Electromechanical, instantaneous for generator or transformer with ct in

fault neutral connection64 – current calibrated MCAG14 R6008* Midos64 – voltage calibrated MFAC14 R6007* Midos

50 – static MCTI14 R6123* Midos

Standby earth Long time delay to protect neutral earthing resistorfault K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

50, 51 and definite time characteristics, two setting groups, circuit breaker control

and internal breaker failure feature.



Sensitive earth fault Static, definite time delay relay with high third harmonic rejection. MCSU R6018* Midos51

Rotor earth fault AC injection type voltage relay to detect a single earth fault on the rotor MRSU04 R6119* Midos64 circuit. For rotors which are fed from dc or thyristor excitation dc source.

Voltage Static, definite time delay overvoltage relay. MVTU12 R6041* Midos

59 Static inverse time delay overvoltage relay MVTD12 R6051* Midos

Static instantaneous overvoltage relay MVTI12 R6033* Midos

Power Static, single phase reverse power relay with definite time delay for MWTU11 R6127 Midos32 protection of generators against motoring.

Static, 3 phase directional power relay for prevention of motoring in MWTU14 R6122* Midossynchronous machines.

Frequency Static, two stage definite time under/over frequency relay MFVU21 R6061* Midos

81 Static, definite time under and over frequency relay MFVU14 R6118* Midos

Loss of excitation Static field failure relay with offset mho characteristics MYTU04 R6115* Midos40

Back-up impedance Static under-impedance relay with three phase impedance measurement MZTU34 R6120* Midos

21



11


Generator and Generator/Transformer Protection (continued)


Check K Range numerical r elay ensures that two systems are sufficiently in KAVS R6506 Midos

synchronising synchronism before being connected together either manually or by25 auto-reclose.

Static check synchronising relay MAVS R6045* Midos

Thermal Static relay which provides thermal replica protection MCHD04 R6117* Midos

46

Transformer Protection and Control


Differential K Range high-speed biased differential relay with 2, 3 or 4 bias windings, KBCH R6530 Midos

87 inrush blocking feature, internal ratio and vector compensation andcommunications facility. Opto-isolated inputs accept signals from external

plant .

Static, high-speed biased differential relay, with inrush blocking feature MBCH R6070* Midos

and external correction facility for CT mismatch.

With 2, 3 or 6 bias windings

Overcurrent and/or K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midosearth fault and definite time characteristics, two setting groups, circuit breaker control




Electromechanical instantaneous MCAG19 R6035* Midos

Earth fault K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

50, 51 and definite time characteristics, two setting groups, circuit breaker control

and internal breaker failure feature.



64 Restricted earth fault protection in transformer windings. MCAG14 R6008* Midos

MFAC14 R6007* Midos

MCTI14 R6123* Midos

51 Static sensitive earth-fault relay for supplies earthed through a high MCSU R6018* Midos

value resistor.

Voltage regulator For use with on-load tap changers. Features include: MVGC R6021* Midos90 – inverse or definite time operating characteristics,

– integral line drop compensation

– undervoltage– overvoltage and overcurrent supervision

– reverse reactance or circulating current compensation for paralleltransformers to minimise circulating current.

– voltage reduction which can be selected locally or remotely

Indication Auxiliary relays for trip and indication from Buchholz relay and MVAA R6009* Midos

30, 63, 74 winding/oil temperature devices. MCAA R6047 Midos



12

Breaker Fail


Breaker fail K Range overcurrent relays have integral breaker failure protection KCGG R6551 Midos

62 KCEG R6551 Midos

Static schemes comprising single or multiple overcurrent elements

50 Fast reset, static overcurrent relay MCTI R6037* Midos

62 Definite time delay relays MVTT R6012* Midos

Busbar Protection


Static medium-impedance biased current differential busbar protection DIFB N.1.6913 Cubiclescheme. Suitable for use with current transformers of equal or unequalratio. Adaptable for different busbar configurations

Compact static medium impedance biased current differential busbar DIFB-CL N.1.6913 Cubicle

protection suitable for use with current transformers of equal or

unequal ratio. Adaptable for different busbar configurations

Low impedance Static high-speed low impedance biased differential busbar protection MBCZ10 R6059* Cubicledifferential schemes. For use with current transformers of equal or unequal ratio.

87 Modular design adaptable to different busbar arrangements.

High impedance Electromechanical instantaneous, unbiased, circulating current

differential differential relay suitable for discrimination and check zones.87 – current calibrated MCAG34 R6008* Midos

– voltage calibrated MFAC34 R6007* Midos– static MCTI34 R6123* Midos

Bus wire Time delayed static overvoltage relay for indication of open circuited MVTP R6023* Midossupervision transformer secondaries associated with high impedance busbar59 differential protection. Incorporates a bus wire shorting relay.

DC supply Electromechanical relay for the supervision of trip and alarm circuit MVAX12 R6010* Midos

supervision supply.

27

Indication Electromechanical zone indication flagging relay with contacts for MVAA13 R6009* Midos

30 remote indication.

Trip relay Electromechanical hand reset multi-contact trip relay. MVAJ13 R6015* Midos

86

Frame leakage Electromechanical overcurrent relay connected between switchgear MCAG12 R6025* Midos

64 frame and earth.

Blocking scheme K Range overcurrent relays have integral start contacts and blocking KCGG R6551 Midos68 inputs that can be combined to form simple busbar protection schemes. R4012

R4014



13


Rectifier Protection


Overcurrent K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

protection and definite time characteristics, two setting groups, circuit breaker control



K Range overcurrent relays have a special inverse time curve suitable KCGG122 R6551 Midos

for protection of silicon rectifiers

Special inverse, static IDMT relay, suitable for Class III traction service MCTD R6038* Midos

rectifiers

Short circuit Electromechanical, instantaneous untuned relay to detect heavy fault MCAG19 R6035* Midos

50 currents on the ac breaker.

Earth fault Instantaneous balanced and restricted earth fault protection for

50 rectifier transformers.

64 – current calibrated MCAG14 R6008* Midos– voltage calibrated MFAC14 R6007* Midos– static MCTI14 R6123* Midos

Capacitor Protection


Capacitor K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

protection and definite time characteristics, two setting groups, circuit breaker control

51 and internal breaker failure feature.


Static relay with built-in biasing feature for the protection of double star MCVI R6048 Midos

capacitor banks.

Motor Protection


Differential Electromechanical, instantaneous relay using the high impedance

87 circulating current principle. For the protection of large motor windings.

– current calibrated MCAG34 R6008* Midos– voltage calibrated MFAC34 R6007* Midos– static MCTI34 R6123* Midos

Thermal overload, Numerical relay which provides thermal overload protection with MOPN R6121* Midos

unbalance, selectable thermal operating characteristics. High set overcurrent,excessive starting sensitive unbalance and earthfault elements are available, which can betime, stalling, high disabled if not required. The relay also provides protection against

set overcurrent excessive starting time and locked rotor during running.

and earth fault

46, 49, 50, 51,56



14

Motor Protection (continued)


Thermal overload, Static relay which gives thermal overload, single phasing/unbalance Motormaster I7-013 DIN

unbalance, single and earth fault protection for induction motors. Suitable for MM200

phasing and motors fed by fused contactors.

earth fault 46, 49, 50

Undervoltage May be used to disconnect the motor in the event of serious loss of 27 supply when restoration is undesirable.

– definite time MVTU11 R6041* Midos

– inverse MVTD11 R6051* Midos

Additional Protection of Synchronous Motors


Undervoltage May be used to disconnect the motor in the event of serious loss of 27 supply when restoration is undesirable.

– definite time MVTU11 R6041* Midos– inverse MVTD11 R6051* Midos

Out-of-step Electromechanical relay which detects unsynchronised running of MFOS24 R6101* Midos

68 synchronous motors. Used to isolate the motor from the supply or to

remove the field excitation prior to resynchronising.

Reverse power Detects motor generation on loss of supply. For use when power MWTU11 R6127 Midos

32 reversal cannot occur during normal operation and when other loads

are connected to the motor busbars.

Overvoltage Static relay, which can be used to detect loss of supply where59 the connected load on the busbar is small and the resultant

voltage generated is excessive.

– inverse time MVTD12 R6051* Midos

– definite time MVTU12 R6041* Midos

Under frequency Static relay used to detect loss of supply when the motor is on load and

81 fairly rapid deceleration occurs.

– definite time MFVU14 R6118* Midos– two stage definite time MFVU21 R6061* Midos

General Applications


Overcurrent and K Range three stage overcurrent/earth fault relay with multiple inverse KCGG R6551 Midos

earth fault and definite time characteristics, two setting groups, circuit breaker control50, 51 and internal breaker failure feature.


Electromechanical relays:– instantaneous MCAG11, 12, R6025* Midos

13MCAG19 R6035* Midos

Directional Stat ic single and three phase relays for directional control of MCGG relays. METI R6003* Midosovercurrent or K Range three stage overcurrent/earth fault relay with multiple inverse KCEG R6551 Midos

earth fault and definite time characteristics, two setting groups, circuit breaker control67 and internal breaker failure feature.



15


General Applications (continued)


Sensitive earth Static, definite time delayed sensitive earth fault relay with high MCSU R6018* Midos

fault 3rd harmonic rejection.

51

High impedance Electromechanical circulating current relays:(differential, – current calibrated MFAC14, 34 R6007* Midos

balanced and – voltage calibrated MCAG14, 34 R6008* Midos

restricted earth – static MCTI14, 34 R6123* Midos

fault protection)87

Overvoltage and Static relays:

undervoltage – instantaneous undervoltage or overvoltage MVTI R6033 Midos

27, 59 – definite time undervoltage MVTU11 R6041* Midos– definite time overvoltage MVTU12 R6041* Midos

– definite time neutral displacement MVTU13 R6041* Midos– inverse time undervoltage MVTD11 R6051* Midos

– inverse time overvoltage MVTD12 R6051* Midos

– inverse time neutral displacement MVTD13 R6051* Midos

Electromechanical relays:

– instantaneous undervoltage or overvoltage MVAG R6049 Midos

Power Static, definite time single phase reverse/ low forward power relay MWTU11 R6127 Midos

32 Static, definite time, three phase reverse/low forward power MWTU14 R6122* Midos

Frequency Static, two stage definite time under/over frequency relay. MFVU21 R6061* Midos81 Static definite time under and over frequency relay MFVU14 R6118* Midos

Check synchronism K Range relay used to ensure that two systems are sufficiently in KAVS R6506 Midos

25 synchronism before being connected together manually or via auto-reclose.

Static check synchronising relay MAVS R6045* Midos

Signalling Voice frequency (VF) permissive intertrip and blocking with external test SD15 R5556 Modularfacilities for use with distance protection.

VF equipment with internal test facilities for use with distance protection SD15 R5579 Modular

or for direct intertripping

HF power line carrier blocking for use with distance protection K10 R5250 Modular

VF digital intertripping equipment MJTW R6124 Modular

Fuse failure Electromechanical relay used to supervise voltage transformer secondary MVAP22 R6052 Midos

60 circuits which operates if the voltage is interrupted or becomes

unbalanced due to failure of primary or secondary fuses.Used to provide an alarm.

Power supply DC/DC converter for general applications MSTZ02 R6006* Midos

DC/DC converter for heavy duty applications MSTZ04 R6128* Midos

AC/DC power supply MSTZ41 R6093* Midos

Auxiliary relays Electromechanical attracted armature relays.

94 Voltage operated MVAA R6009* MidosVoltage operated with static time delay circuit MVUA R6039* Midos

Current operated MCAA R6047 Midos



16

General Applications (continued)


High-speed Electromechanical relay, typically for use as a carrier send/receive

auxiliary relay interface for distance protection schemes. MVAA16 R6050 Midos

94

Trip and lockout Multi-contact tripping and lockout relays available in hand, electrical or MVAJ R6015* Midos

86 self reset models.

Interposing relay Electromechanical relay, suitable for remote operation over long pilot wires MVAW R6005* Midos

Trip circuit DC supply supervision MVAX12 R6010* Midos

supervision74 Detects open circuit trip coil or trip circuit wiring with circuit breaker closed. MVAX21 R6010* Midos

Also detects loss of dc trip supply.

Detects open circuit trip coil or trip circuit wiring with circuit breaker closed MVAX31 R6010* Midos

or open. Also detects loss of dc trip supply.

Time delay Static, delay on pick-up or drop-off relays. MVTT R6012* Midos62

Auxiliary relays Prima is a range of plug in auxiliary relays with sockets suitable for rear

94 rack mounting or front connected DIN rail mounting.

For ac or dc operation

Self reset relays PRS...N R4107 Special

Hand and electrically reset relays PRH...N R4107 Special

Electrical reset PRE…N R4107 Special

For dc operation

Time delayed relays, self reset – delay on drop-off PRS...D R4107 Special

Time delay relays, self reset – delay on pick-up PRS...P R4107 Special

Rear connected socket PSR R4107

Front connected socket PSF R4107



17


Test Equipment


Test equipment Test block suitable for Midos MMLG R6004* Midos

Test plugs suitable for Midos MMLB R6004* Midos

Monitoring and Control


Battery monitoring The battery alarm provides continuous monitoring of substation batteries BA300 I6-009 Panelwhich gives local and remote indication of alarm conditions, impedance

alarm and earth fault alarm.

Power factor Microprocessor based relay controlling capacitor switching with simple N300 I6-010 Panel

correction setting controls.I

6-011Control and Complete range of control, auxiliary and instrument switches ODS I7-001 Special

selector switches

Measuring Instruments


Indicating Complete range of indicating instruments for both panel and METRIK I3-G21 DIN

instruments switchboard mounting to monitor all power system parameters.

Electrical High accuracy electrical transducers providing local and remote ISTAT300 I4-028 Specialtransducers indication in conjunction with instruments, recorders, data loggers I4-025

and SCADA systems ISTAT200 I4-019 Special

Current Comprehensive range of moulded case current transformers for use TA Series I7-015 Special

transformers with electrical measuring instruments.



18


General Publications

Details Publication

Electronic module housing (M3) R5234

Draw-out and M3 modular relay weights R3843

Midos system R6001*

Midos assembly instructions R7012*

Midos relay weights R6055*

Midos connectors: suppliers list R6014

Application Guides

Details Publication

REF protection using K Range overcurrent relays R4120

MV single busbar protection with K Range relays R4112

MV double busbar protection with K Range relays R4114

K Range breaker fail R4115

Application Guide for Electrical Transducers I9-113

Software

Application Software name

LFZR setting programme (Windows) LFZRCOM

OPTIMHO setting programme OPTICOM

K Range setting and control software Protection access software and toolkit

K Range off-line setting software (Windows) Courier-Comm

EMPF disturbance recorder configuration software UG5

TPE disturbance recorder configuration software WINTPE



19



A L S T O M T & D P r o t e c t i o n & C o n t r o l L t d St Leonards Works, Stafford, ST17 4LX EnglandTel: 44 (0) 1785 223251 Fax: 44 (0) 1785 212232 Email: [email protected] Internet: www.alstom.com

©1999 ALSTOM T&D Protection & Control Ltd

Documents

Relay Application Guide_AREVA