Click here to load reader
Upload
fadelkhalifahibrahim
View
214
Download
0
Embed Size (px)
DESCRIPTION
nmnmmm
Citation preview
Rekayasa Lalu Lintas
Table 9 11A. Adjustment factor for right turns ( fRT ); formulas
Cases 1 6; Exclusive/ shared lanes and protected / permitted phasing
fRT = 1.0 - PRT [0.15+(PEDS/2100)(1-PRTA)]
0.0 ( PRT ( 1.0
Proportion of RT in the lane group = 1.00 for excl. RT lane (Cases 1-3);
( 1.00 for shared lane (Cases 4-6).
0.0 ( PRT ( 1.0
Proportion of RT using protected phase = 1.00 for complete protection no-peds;
( 1.00 for permitted with conflicting peds;
0 ( PRT ( 1700
Volume (peds/hr) of peds conflicting with RT (if PEDS) ( 1700, use 1700).
fRT ( 0.05
Case 7; Single-lane approach ( all traffic on approach in a single lane, as defined in Figure 9 3 )
fRT = 0.90 - PRT [0.135+(peds/2100)]
0 ( PRT ( 1.0
Proportion of RT in the lane group.
0 ( PEDS ( 1700
Volume (peds/hr) of peds conflicting with RT (use 0 if RT is completely protected).
fRT = 1.00 if PRT = 0.0
fRT ( 0.05
Range of variable values
Case
PRT
PRTA
PEDS
Simplified formula
1. Excl. RT lane; prot. RT phase
1.0
1.0
0 0.85
2. Excl. RT lane; perm. RT phase
1.0
1.0
0 1700 0.85 (PEDS/2100)
3. Excl. RT lane; prot + perm. RT phase
1.0
0 1.0
0 1700 0.85 (PEDS/2100)(1-PRTA)
4. Shared RT lane; prot. RT phase
0 1.0
1.0
0 1.0 PRT [ 0.15 ]
5. Shared RT lane; perm. RT phase
0 1.0
0.0
0 1700 1.0PRT[0.15+(PEDS/2100)]
6. Shared RT lane; prot + perm. RT phase0 1.0
0 1.0
0 1700 1.0PRT[0.15+(PEDS/2100) (1-PRTA)]
7. Single-lane approach
0 1.0
-
0 1700 0.9PRT[0.135+(PEDS/2100)]
Source ; TRB, 1944.