Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Shock cushioning
Impact energy dispersion
Shock wave absorption
With ACTIV CUSTOM reinforced protective cases, made in France, your mobile printers are always fully protected in case of drops and shocks. Many options are available for you to adapt your ACTIV case to your specific needs. The ACTIV cases are also adjustable to any device brand.
REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER (910)
+
PRINTOUT OPENING
BUTTONS OPENING
PERIMETRIC BUMPERDouble integral bumpers on the 4 sides of the device absorbs lateral and corner shocks both from above and below.
PATENTED INNOVATION
www.mobiliscase.com@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase
REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER
ERGONOMICS ACCESSORIES INCLUDED
+
Belt strap
Snap fastener
Belt 40mm
Ref. 001056
Optional
Rings for shoulder straps
Safety carry shoulder strap
2 attachment points
Ref. 001027
Basic shoulder strap with 4 soft ring
Ref. 001025
arrachement programmé
Systè
me de sécurité à
Optional
2 sewed rings.
Mandatory for shoulder straps
Snap fastener to secure the device in the case
www.mobiliscase.com@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase
www.mobiliscase.com
@MOBILIS @Mobiliscase@Mobiliscase@Mobiliscase
REINFORCED PROTECTIVE CASEFOR MOBILE PRINTER
OPTIONNAL
+
Flap
Crocodile clip
Logo
Closing flap with Velcro® security. Polyester 1680D finishing. Replace the snap fastener
Ref. 910F-FLF-FER-VEL
Replace the belt strap included
Ref. 910R-EAC-CROCLI
Replace the belt strap included. Adaptable height thanks to a snap fastener
Ref. 910F-EAC-PASS-BCL
On the flap. 54x28mm
Ref. 902F-IDE_LOGO54x28
Belt strap with snap fastener
Replace the belt strap included
Ref. 910F-EAC-WHEEL
Wheel
Belt clip with Clip 06
Ref. 910N-EAC-BELTCL
Belt strap with Clip 06, 50mm
Ref. 910N-EAC-BELTST
Optional