> Manholes

> Water & Sewer Pipes

> Tanks

> Floors & Walls

REHABILITATIONP R O D U C T SP o l y m e r i c M a t e r i a l s

Q R M P E R F O R M A N C E S N A P S H O T

vor texcompan ies .com

The Quadex® Repair Materials Division designs,

formulates and manufactures high performance

polymeric materials and coatings for the water,

wastewater and industrial marketplace.

E P O X Y C O A T I N G SCorrosion Protection

STRUCTURE GUARD®

DescriptionStructure Guard® is a 100% solid, high-build epoxy coating formulated to provide long-term corrosion protection and structural enhancement for wastewater infrastructure subject to high levels of corrosion and/or abrasion. Structure Guard sets fast for a quick return-to-service in the most aggressive and turbulent environments.

Application MethodStructure Guard can be hand, spray or spin applied with approved plural component spray equipment.

Recommended For• Sewer pipes and manholes • Pump stations • Concrete or masonry vaults and tanks • Treatment plant headworks and diversion structures • Steel pipes and tanks

Features and Benefits• 100% Solids, no VOCs • Quick drying, slick finish • Easy to clean high maintenance structures

DescriptionStructure Guard®-RS is a rapid setting epoxy for structures that need to be quickly returned to service.

Application MethodTo be trowel applied.

Recommended For• Inverts• Manhole bottoms• Benches

Features and Benefits • Excellent immersion resistance • Easy handling

DescriptionStructure Guard® - Water is NSF Certified for pipe 4” and greater and tanks 50 gallons and larger.

Application MethodCan be plural component sprayed or trowel applied.

Recommended For• Concrete and steel potable water tanks• Potable water pipe (perfect for long pipes)• Raw water pipe and tanks• Fiberglass potable water tanks Features and Benefits• 25-minute pot life, for extended recoat time• NSF 61 & 61.5 Certification

DescriptionStructure Guard®-FM is a 100% solids epoxy micro fiber reinforced mastic used to protect new infrastructure and to rehabilitate existing, damaged, infrastructure.

Application MethodStructure Guard-FM is best applied using a trowel.

Recommended For• Manholes, wet wells, vaults and septic tanks • Steel substrates • Floor and wall penetrations/cracks • Simple spot repair Features and Benefits• Extreme bonding to nearly all substrates • Fast curing • Easy workability • ¼” build capability with no sag • No mixing means faster application

STRUCTURE GUARD® - WATER

STRUCTURE GUARD®-FM

STRUCTURE GUARD®-RS

DescriptionFlex Guard® is a 100% solids, hybrid epoxy coating that provides both strength and chemical resistance while delivering 100-150% elongation for extreme environments.

Application MethodFlex Guard is designed for spray or trowel applications.

Recommended ForFlex Guard is engineered and formulated for concrete, brick and steel structures affected by freeze/thaw.

Features and Benefits• 100% Solids, no VOCs • Quick drying • Can be applied in areas of high humidity • Unaffected by freeze/thaw

DescriptionFlex Guard®-FM is a flexible fiber reinforced epoxy mastic for use on metal and concrete substrates, cracks or joints that experience movement. Ideal for freeze/thaw and structures that experience temperature fluctuation.

Application MethodFor best results, apply with a putty knife or trowel, depending on the voids to be filled or covered.

Recommended ForJoints / Gaps / Cracks / Holes Features and Benefits• Fiber reinforced • Flexible, 100-150% elongation • Quick cure time

DescriptionChimney Guard™ is a one step, durable chimney seal made from a 100% solids Epoxy/Urethane hybrid. It is designed to provide a highly flexible and securely bonded seal prepared to address heavy traffic loading, extreme freeze/thaw and infiltration.

Application MethodChimney Guard can be spray or trowel applied. Prior to application, base surface must be abraded.

Recommended ForChimney Guard is recommended for surfaces that experience extreme freeze/thaw or heavy traffic loading. Features and Benefits• High build monolithic coating / 100 mils per coat • One step, durable chimney seal • Superior adhesion to steel, concrete and brick • Permanent flexibility at low temperature • Advanced elongation properties • Extended work time

DescriptionQuadex I&I Guard® is quick response dual component hydrophobic polyurethane with a 1 - 3 second reaction time. It is designed to stop rapid water flow (up to 50 GPM) leaking from concrete or other underground structures. Since I&I Guard is hydrophobic, it will not shrink, contains no VOCs and requires no special breathing apparatus or other PPE.

Recommended ForWater inflow and infiltration control in manholes, vaults and other concrete, brick or stone structures, above or below grade.

POLYMERIC EXPANSION & CRACK MATERIALS

FLEX GUARD®

FLEX GUARD®-FM

CHIMNEY GUARD™

I&I GUARD®

All Quadex products are produced with the environment in mind, and developed in strict accordance to

ASTM and similarly substantiated industry standards. When combined with the Quadex sprayMASTER® II

coatings system, the result is a precision applied coating that delivers high performance and decades

of uninterrupted service.

Leak Stoppage

Q R M P E R F O R M A N C E S N A P S H O T

Structure Guard®-FMCorrosion Protection Level — High

Elongation Level — High

Recommended For — Protecting new infrastructure and to rehabilitate existing, damaged, infrastructure.

Structure Guard®-RSCorrosion Protection Level — High

Structural Level — Structural

Recommended For • Inverts

• Voids

• Benches

Chimney Guard™Corrosion Protection Level — High

Elongation Level — High

Recommended For — Surfaces experiencing extreme freeze/thaw and heavy load conditions. Specifically

designed for the chimney section of manholes.

I&I Guard®

Material Characteristics — 2 lb., Closed Cell

Environmentally Friendly — No VOCs, No HFCs, No CFCs

Recommended For — Water inflow and infiltration control in manholes, vaults and other concrete, brick

or stone structures, above or below grade.

Structure Guard®

Corrosion Protection Level — High (pH of less than 1)

Structural Level — Structural

Recommended For• Sanitary/storm sewer systems

• Manholes

• Pipelines

• Pump stations

• Concrete/masonry vaults and tanks

• Steel vaults and tanks

• Sanitary sewer treatment facilities

Structure Guard® - WaterCorrosion Protection Level — High

Structural Level — Structural Enhancement

NSF Certification — 61 & 61.5 (Pipes: ≥4”, Tanks ≥50 gal)

Recommended For• Concrete and steel potable water tanks

• Potable water pipe

• Raw water tanks

• Raw water pipe

• Fiberglass potable water tanks

| 1-855-WHYDIG1 | vortexcompanies.com | ©2020 Vortex Companies |

Flex Guard®-FMCorrosion Protection Level — High

Elongation Level — High

Recommended For — Protecting concrete, brick and steel structures affected by freeze/thaw conditions.

Flex Guard®

Corrosion Protection Level — High

Elongation Level — High

Recommended For — Protecting concrete, brick and steel structures affected by freeze/thaw conditions.