Register 01 Miscellaneous

8/3/2019 Register 01 Miscellaneous

1/10

MAGNETOM

Register 1 EnglishTraining Document Doc. Gen. Date: 12/04

Siem ens AG 2004The reproduction, transmission oruse of this document or its co ntentsis not permitted without expresswritten authority. Offenders will beliable for damages. All rights,including rights created by patentgrant or registration of a utilitymodel_or_design,_are_reserved.

CS

Basic Description

Miscellaneous


2/10

MAGNETOM Register 1 Training Document Page 2 of 4 Siemens AGBasic Description 22.12.2004 CSTC 23 Medical Solutions

0 - 2

This page intentionally left blank.


3/10

Contents 0 - 3

Siemens AG Register 1 Training Document Page 3 of 4 MAGNETOMMedical Solutions 08.07.2004 CSTC 23 Basic Description

1 _______Maps ___________________________________________________________ 1

City of Erlangen Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Overview MED New Factory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 _______Course Structure _________________________________________________ 1

MR-Planning Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

MR-Basic Course Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3 _______Appendix _______________________________________________________ 1

Course Evaluation Form. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Instruction Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Page


4/10

0 - 4 Contents


Page


5/10

1 - 1


City of Erlangen Overview 1

Maps 1


6/10


1 - 2 Maps

Overview MED New Factory 1


7/10

2 - 1


MR-Planning Guide 2

Course Structure 2


8/10


2 - 2 Course Structure

MR-Basic Course Description 2

Description:

MR1BASICS is a 10-day course covering the fundamentals of Magnetic Resonance. Lecture topics include MR

Safety, a historical review of MR, principals of MR imaging, and the typical hardware components of a MRsystem. Lab sessions are designed to complement the lecture. Lab activities include the handling and operation

of current MAGNETOM MR systems. Typical imaging protocols and preparation adjustments for a

measurement are discussed and demonstrated in the lab. An introduction to the service software and service

routines is given. Common preventative maintenance procedures are discussed.

This course is the prerequisite for the system training MR2AVANTO, MR2SYMHAR, MR2CONCERTO,

MR2VISION, MR2IMPEXP, MR2MAG035, MR2JAZZ and any other MR modality.

Prerequisites:

A working knowledge of digital and analog electronics, former experience with computer basedsystems and preferable service experience with electronic systems.

The former participation of the MR2SYNGO course and the MRBASICS prestudy CBT courseMR0BASICS with a final prestudy test grade of > 70%.

Who should attend?

Future CSEs for the MRI product service as a prerequisite for the classroom-based training course

MR1BASICS.

Objectives:

Understand the basic principles and physics of MRI Understand the general difference to other modalities

Understand the general Siemens safety guidelines and

special MR safety guidelines according to the hazards

of RF-, gradient and strong magnetic fields and the

filling of magnets with cryogenic gases

Understand Siemens customer service processes e.g.

HSC, PS, SD, TC and policies, procedures e.g. order

and return of spare parts, escalation procedures

Understand and describe the basic components of an

MRI system on a block diagram level Perform general quality assurance measurements

General knowledge of the Siemens family of MRI

scanners e.g. low field, high field and ultra high field

systems

Understand the service software and perform general

service diagnostics

Operate the MRI system and perform basic imaging Understand the general use of service tools and test

equipment

Understand the preparation adjustments for imaging Understand general preventive maintenance

procedures

Outline (Lessons):

Safety guidelines, MRI safety

The Siemens MR product line

MR basics and physics

T1, T2, T2*, proton density (PD) contrast

Basic imaging protocols spin echo, gradient echo,

inversion recovery,

Influence of sequence parameters

Patient related adjustments e.g. tuning, ADJ

frequency, ADJ Transmitter, ADJ Receiver, 3D-Shim

Functional principle of hardware components

Processor configuration and operating software

Measurement and control unit

RF system e.g. transmitter and receiver

Gradient system

Magnet system, superconductivity, ramping

theory, magnet monitoring, helium fill theory


9/10

3 - 1


Course Evaluation Form 3

Please fill out the course evaluation form at the last day of the course andgive it back to your instructor.

Safety Instruction Form 3

Please fill out the safety instruction form at the first day of the course and giveit back to your instructor.

Appendix 3


10/10


3 - 2 Appendix

This page intentionally left blank.

Documents

Register 01 Miscellaneous