Upload
lammien
View
215
Download
2
Embed Size (px)
Citation preview
2009-2010
Your Premier Source for High TechMaterials and High Quality ReplacementParts for All Types of Processing Plants.
REGAL INDUSTRIES, INC.REGAL INDUSTRIES, INC.RIRIPower Plants
Cement PlantsChemical Plants
Paper MillsRefineries
All Types of Mechanical Parts
CentrifugalCastings
Burners
Fabrications
Custom Castings
Forgings
Rebuildand Repair
Precipitator Parts
Custom Alloys
Corrosion Materials
Wear Materials
Ceramics
Alstom Vertical Shafts
ALLIS MINERALS/METSOBALL MILL GEAR 9.0’ X 10.0’
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
22
SPLIT GEAR - HALVES
152.0” OD X 10.5” FACE 2 DP
298 TEETH
CALL US NOW!!!
WE CAN SAVE YOURS
20 TOOTH MATING PINION GEARW / BEARINGS & SEALS INSTALLED
THIS GEAR SET WAS SAVED FROM THE SCRAP YARDTHE ENTIRE GEAR SET WAS SAND BLASTED, WELDS INSPECTED,HOLES CHECKED FOR SIZE, THREADED HOLES RETAPPED, AND
STRUCTURALLY INSPECTED FOR ANY DAMAGE. THE OD WAS TURNEDTO CLEAN UP AND THE TEETH WERE RECUT. A NEW PINION WAS MADE
AND CUT TO MATE WITH AND MATCH THE RING GEAR. THE CENTERDISTANCE AND RATIO REMAIN THE SAME. BOTH THE RING GEAR AND
THE PINION TEETH WERE INDUCTION HARDENED TO PROVIDELASTING WEAR PROPERTIES.
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
33
REPLACEMENT WORM SHAFTS AND WORM GEARSALSTOM COAL PULVERIZERS
WORM GEAR SIZE GEAR MILL SIZECENTER DISTANCE RATIO ALSTOM MILL NUMBERS
54.010 14-2/7 1003, 983, 963
48.010 13-3/7 943, 923, 903, 88318-3/5 863, 843, 823
41.010 17-1/5 803, 783, 763
36.010 13-5/6 753, 733, 71315-1/5 703, 68316-1/5 743, 723
30.010 12-2/5 67314-2/5 663, 643
27.010 10-4/5 633, 613, 59313-1/2 623, 603, 583
24.010 11-3/5 593
21.847 9-2/5 57311-3/4 563, 54313-3/4 533A
15 523, 503, 483
20.010 13-3/4 533
18.010 11 493, 473A, 47313-1/4 463, 443
HIGH QUALITY GEAR SETS ARE CRUCIAL TO MILL PERFORMANCE. OUR CASE HARDENINGMETHOD OF THE WORM TEETH ELIMINATES THE POSSIBILITY OF CHECKING AT THE
CROWN AND PREMATURE WEAR ON THE FLANKS. FLAME HARDENING IS A PROCEDURETHAT IS USED BY MOST MANUFACTURERS, AND CREATES MOST OF THE FAILURES.
CDA 916 CENTRIFUGALLY CAST NICKEL-TIN-BRONZE IS THE HIGHEST OF QUALITY FOR WORM GEARS ANDWHEN MATED WITH A POLISHED WORM, GIVE EXCELLENT PERFORMANCE.
ALL WORM SHAFTS AND WORM GEARS ARE INTERCHANGEABLE WITH OEMPARTS. YOU CAN ORDER A WORM SHAFT. OR JUST A WORM GEAR, OR A
MATCHED SET. CALL US FOR A PRICE!!!!
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
44
GE Turbine Turning Gear ABB Turbine Turning Gear Set
25" FACE X 100” Long Gear for Foster Wheeler Mill
Car Dumper Segment
EL64-76 Spiral Bevel Gear
Car Dumper Graphited Bushing
WORM SHAFT AND WORM GEAR - EIMCO PROCESS
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
55
Support Rolls — Barge Unloader Link Belt - Chain Pins
Dravo/Metso Idler Sprocket 18” ChainHeyl-Patt Bucket Link Pin & Bushings
84” Heyl-Patt Bucket Elevator Drive Gear Dravo/Metso Head Ladder Sprocket W/ Wear Inserts
BARGE UNLOADING GEARS & SPROCKETS
Advise us of your annual usage and we willstock your requirements with shipment thesame day or next day following your release.Price can be negotiated on large volume.
Replacement Parts For CE Mills
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
CE 673 Worm Gear Set
CE 633 Vertical Shaft
CE 673 Journal Head Assembly
6
783 New Gear & Hub Repair
Stocking Program Trunnion Bushings
6
CE 903 Journal Shaft Locknut
CE 473-1003 Roll Lock Nuts
Super Roll Upper Housing 923 Mill
Super Roll Lower Housing 923 Mill
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
Cast Steel Exhauster Bearing Housing (Repairable)
Trunnion End Caps
Inner and Outer Springs for CE Mills
Exhauster Bearing Housing & Internal Parts
77
CE 673 Worm Gear Hub
673 Lower Bearing Seat
CE Air Preheater Shaft
Thrust Plates 1003 Mill
Oil Pump Bushing
Upper Journal Housing Covers
Oil Pump Hub
CE 903 Bearing Spacer
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com88
RIRI
683/703 New Gear Installation - Hub RepairShaft Blued to Repaired Hub-Shaft Installedin Hub-Shipped Upright To Prevent Damage
CE 673 New 20% Cr Rolls
763-783-803 Vertical Shaft Locknut
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
CE683/703 Upper and Lower Journal Housings
Spring Seat Bolt and Nut
99
CE 673 Journal Head Skirt
Upper Journal Housing Liner
Replacement Parts For B&W Mills
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
Yoke Bushings
Bracket Repair
Pulverizer Springs
Pinion Shaft
1010
EL-76 Gear Hub
Pinion Barrel Rebuild
Brad Foote G 55HB Gear Box Rebuild
Coal Feeder Segments
EL76 Bearing Plate
EL64-76 Spiral Bevel Gear
EL-70 Rebuilt Yoke and Ring Seat
Note:We Stock Main Shafts and Rebuilt Yokes We Will Exchange YokesBreakdown Service Available
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
EL76 Yoke with New Bushing
Air Seal Housing
EL Main Shafts - In Stock
Bluing Yoke to Main Shaft
1111
Wedge Bolts MPS 89
Pressure Spring MPS 89
Wear Plates for MPS 89
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
1212
MPS 89 Rotating Throat Deflectors
MPS 89 Yoke
DO YOU
HAVE ONE
OF THESE?
CALL US TOREPAIR ITQUICKLY!
MPS 89 Seal Air Fan MPS 89 Seal Air Fan Shaft
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
1313
MPS 89 Grinding Segments
MPS 89 Ring Seat
NEED IT
FIXED?
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
1414
Custom Engineered Coal SpreadersComplete Coal Spreader Assemblies
Coal Spreader Nozzle Replacement
• Longer Wear
• No Maintenance
• Custom Designed
• Hi-temp and Special Wear Applications
• Experimental Castingsand Forgings
• Superior Alloys
• Any Requested Angle
6” Tube Protector(Custom Alloys)
Primary Air Vane
Low Nox Burner Impellers
Deflector Block and Tie Rod
Tube Protector Cover
30 Degree Coal Spreader
Steeple Castings
Tube Protector
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
1515
Ceramic Sleeve
Burner Parts
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
1616
Bearing Block Cam Follower DS Hammer
Backing Plate CS & DS Upper Bracket CS Lower Bracket
Assembly Hdwr Bearing Pedestal CS Balanced Hammer
Lifting Block Lifting Rod DS Lower Bracket
Suspension Kit Coupling Bearing
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
1717
WILLIAMS IMPACT PULVERIZER-ROTOR REBUILDSIZE OF THIS ROTOR IS 40” X 82” LONG - WGT APPROX 20,000#
PROJECT INCLUDED A TOTAL DISMANTLING OF WORN HAMMERS,SPACERS AND PINS. THE ROTOR WAS COMPLETELY SAND BLASTED,
WELD BUILDUP OF HAMMER AND PIN SUPPORTS. THE NEW SPACERS WEREHARDENED, THE HAMMERS WERE HARDFACED AT THE IMPACT AREAS,
AND THE HAMMER AND PIN SUPPORTS WERE HARDFACED AND THEENTIRE ROTOR WAS PAINTED. THE HAMMERS, SPACERS AND PINS
WERE ASSEMBLED AND THE END CAPS INSTALLED. THE PAINTWAS TOUCHED UP AND THE UNIT INSPECTED FOR SHIPMENT.
275 HP WESTINGHOUSE EL-56 MILL MOTOR-REBUILT TO CUSTOMERS SPECS
REGAL INDUSTRIES, INC. 1-888-910-9400
857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com857 Richmond Rd. • Painesville, Ohio 44077 • Visit our NEW website: www.regal-industries.com
RIRI
4” Special Anode Wrench Titanium Impeller Repair
Hastelloy C-22 Coils
1818
Titanium Test Cell
TITANIUM TEST CELL2-1/2" DIAMETER
.020 WALL THICKNESS
Nickel 600 Tray
Monel 400 & Nickel 200 Pipe Fabrications
Hastelloy C-276 Knife Blades
42” Inconel 600 Tube Sheet
440-352-9600
email:[email protected]:[email protected]
FAX 440-352-9682
1919
AMPCO 25SAE 430BSAE 660BRASSCUPRO-NICKEL 70/30CUPRO-NICKEL 90/10RWMA ALLOYSBeryllium CopperNickel-Silver
ALUMINUM ALLOYS11002017202430036061606361017075319355356B-750
COBALT ALLOYSSTELLITE #3®STELLITE #4®STELLITE #6®STELLITE #6B®STELLITE #21®HAYNES #25®HAYNES 188®KOVARMP-35-N
CORROSION & HIGHTEMPERTUREALLOYSA-286L-605RA330NICKEL 200®NICKEL 201®NICKEL 205®MONEL 400®MONEL K 500®INCONEL 600®INCONEL 625®INCONEL718®INCOLOY 800®INCOLOY 800-H®INCOLOY 825®RENE 41®HASTELLOY B®HASTELLOY C276®HASTELLOY C-22®HASTELLOY G-30®HASTELLOY XNITRONIC 40NITRONIC 50NITRONIC 60HAYNES 230®HAYNES 556®WASPALLOYTANTALUMZIRCONIUM
HASTELLOY IS A TRADEMARK OF HAYNES INTERNATIONAL.®STELLITE IS REGISTERED TRADEMARK OF STOODY DELORO, STELLITE, INC.INCOLOY, INCONEL, AND MONEL ARE TRADEMARKS OF THE INCO GROUP OF COMPANIES.
Thank you for choosing Regal Industries, the premier source for HighTech Materials and High Quality Replacement Parts for all types ofProcessing Plants. Regal Industries will custom produce all types ofnuts and bolts to your specifications out of most corrosion, heat, andwear resistant materials. Specialty Centrifugal Castings.
• All Material certified to the appropriate SAE, ASTM, AMS, or MIL SPECS.
• We will rebuild your gear boxes – recondition shafts.• All types of specialty tubing and pipe – 100 ft. minimum.• Re-roll – plate – bar – wire – tubing – pipe to your specs.• Standard or special flanges made to order from any of our
high-tech materials or standard alloys.• Specialty items: Molybdenum, TG&P Shafting, Tungsten,
Chrome-moly, Ni-Hard, Invar.
STAINLESS STEELALLOYS13-8MO15-5PH15-7MO17-4PH17-7PH303304304L309310316316L317L321347409410416420430440445CUSTOM 450CUSTOM 455LESCALLOYALLOY 20
TITANIUM ALLOYS3AL-2.5V6AL-4V6AL-4V ELICOM PURE GR1COM PURE GR2COM PURE GR4COM PURE GR7
TOOL STEELA-2A-6A-8A-10D-2H-13L-6M-3M-4M-42O-1O-6S-7
AIRCRAFT ALLOYS4130414041504320434046154620615086208720931052100
BRASS & BRONZEALLOYSCDA 101CDA 102CDA 110CDA 122AMPCO 18AMPCO 21
REGAL INDUSTRIES, INC.RIRI
REGAL INDUSTRIES, INC.RIRI
857 Richmond Rd. • Painesville, Ohio 44077440-352-9600 • 1-888-910-9400 • FAX 440-352-9682www.regal-industries.com • email: [email protected]
PRESORT STDU.S. POSTAGE
PAIDWILLOUGHBY, OHPERMIT NO. 288
673 MILL WORM SHAFT AND WORM GEAR - SEE PAGE 3
CALL OR E-MAIL FOR A PRICE NOW!!!