References

205

References

Adachi, H., Kuroda, Y., Imahashi, T. and Yanagisawa, K., “Preparation of Piezoelectric Thick

Films Using a Jet Printing System”, Jpn. J. Appl. Phys., 36, Part 1, 3A, 1159-1163 (1997).

Adcock, D. S., and Mcdowall, I. C., “The Mechanisms of Filter Pressing and Slip Casting”, J.

Am. Ceram. Soc., 40 [1] 356-362 (1957).

Adschiri, T., Kanazawa, K., and Arai, K., “Rapid and Continuous Hydrothermal Crystallization

of Metal Oxide Particles in Supercritical Water”, J. Am. Ceram. Soc., 75 [4] 1019-1022

(1992).

Akrill, T. B., Millar, C. J. and Whelan, P. M.; pp. 89-90 in Essential Physics for Ordinary

Level, John Murray Ltd., (1973).

Aksay, I. A., and Kikuchi, R., “Structure of Colloidal Solids”, pp. 513-521 in Science of

Ceramic Chemical Processing, Ed. by L. L. Hench and D. R. Ulrich, John Wiley & Sons Inc.,

New York, (1986).

Aksay, I. A., Chun, C. M., and Lee, T., “Mechanisms of BaTiO 3 Formation by Hydrothermal

Reactions”; pp. 76-79 in Proceedings of the 2nd International Conference on Solvothermal

Reactions, Kagawa, Japan (1996).

References

206

Alford, N. McN, Birchall, J. D. and Kendall, K., “High-Strength Ceramics Through Colloidal

Control to Remove Defects”, Nature, 330, [6143] 51-53 (1987).

Alford, N. McN, Kendall, K., Clegg, W. J., and Birchall, J. D., “Strength/Microstructure

Relationship in Al2O3 and TiO2”, Adv. Ceram. Mater., 3 [2] 113-117 (1988).

Ari-Gur, P. and Benguigui, L., “Direct Determination of the Coexistence Region in the Solid

Solution Pb(ZrxTi1-x)O3”, J. Phys. D: Appl. Phys., 8, 1856-1862 (1975).

Ataie, A., Piramoon, M. R., Harris, I. R. and Ponton, C. B., “Effects of Hydrothermal

Environment on the Particle Morphology, Chemistry and Magnetic Properties of Barium

Hexaferrite”, J. Mater. Sci., 30, 5600-5606 (1995).

Barboux, P., Griesmar, P., Ribot, F. and Mazerolles, L., “Homogeneity-Related Problems in

Solution Derived Powders”, J. Solid State Chem., 5, [1] 65-69 (1995).

Beal, K. C., “Precipitation of Lead Zirconate Titanate Solid Solutions Under Hydrothermal

-41 in Advances in Ceramics, Vol.21, Ceramic Powder Science, American

Ceramic Society Inc. (1987).

References

207

Benbow, J., and Bridgewater, J., pp. 116-118 in Paste Flow and Extrusion, Clarendon Press,

Oxford (1993).

Bergstrom, L., Schilling, C. H., and Aksay, I. A., “Consolidation Behaviour of Flocculated

Alumina Suspensions”, J. Am. Ceram. Soc., 75 [12] 3305-3314 (1992).

Bergstrom, L., and Shinozaki, K., “Effect of Particle Interactions on the Colloidal Properties and

-14 in Fourth Euro-ceramics, Vol. 2, Basic Science -

Developments in Processing of Advanced Ceramics, Part II, Ed. by C. Galassi, Gruppo

Editoriale Faenza editrice S.P.A., (1995).

Berlicourt, D., “Piezoelectric Ceramic Compositional Development”, J. Acoust. Soc. Am., 91

[5] 3034-3040 (1992).

Biggers, J. V., and Venkataramani, S., “Preparation and Reactivity of Lead Zirconate-Titanate

Solid Solutions Produced by Precipitation from Aqueous Solutions”, Mater. Res. Bull., 13, 717-

722 (1978).

Biscan, J., Kosec, M. and Kallay, N., “ The Isoelectric Conditions of the Constituents of the

Complex Oxide Pb(Zr, Ti)O3”, Colloids and Surfaces A: Physicochemical and Engineering

Aspects, 79, 217-226 (1993).

References

208

Bortzmeyer, P., “Dry Pressing of Ceramic Powders”; pp. 102-142 in Ceramic Processing, Ed.

by R.A. Terpstra, P.P.A.C. Pex and A. H. de Vries, Chapman & Hall (1995).

Cady, W. G., Piezoelectricity, McGraw-Hill, New York, (1946).

Cesarano III, J., and Aksay, I. A., “Processing of High Concentrated Aqueous α-Alumina

Suspensions Stabilised with Polyelectrolytes”, J. Am. Ceram. Soc., 71 [12] 1062-1067 (1988).

Chandratreya, S. J., Fulrath, R. M. and Pask, J. A., “Reaction Mechanisms in the Formation of

J. Am. Ceram. Soc., 64 [7] 422-425 (1981).

Chang, J.C., Velamakanni, B. V., Lange, F. F., and Pearson, D. S., “Centrifugal Consolidation

of Al2O3 and Al2O3/ZrO2 Composite Slurries Vs Interparticle Potentials: Particle Packing and

Mass Segregation”, J. Am. Ceram. Soc., 74 [9] 2201-2204 (1991).

Chen, H. D., Udayakumar, K. R., Gaskey, C. J., Cross, L. E., Berstein, J. J., and Niles, L. C.,

“Fabrication and Electric Properties of Lead Zirconate Titanate Thick Films”, J. Am. Ceram.

Soc., 79 [8] 2189-2192 (1996).

Cheng, H., Ma, J., Zhao, Z., Qiang, D., Li, Y. and Yao, X., “ Hydrothermal Synthesis of

Acicular Lead Titanate Fine Powders”, J. Am. Ceram. Soc., 75 [5] 1123-28 (1992).

References

209

Cheng, H., Ma, J., Zhu, B. and Cui, Y., “Reaction Mechanism in the Formation of Lead

Zirconate Titanate Solid Solutions under Hydrothermal Conditions”, J. Am. Ceram. Soc., 76 [3]

625-629 (1993).

Cheng, H., Ma, J. and Zhao, Z., “Hydrothermal Synthesis of PbO-TiO2 Solid Solution”, Chem.

Mater., 6, 1033-40 (1994).

Cheng, H., Jiao, J., Ma, J., Zhao, Z., and Qi, L., “X-ray Analysis of PLZT Solid Solution

Formed under Hydrothermal Conditions”, Chem. J. Chinese Univ., 17 [8] 1253-1257 (1996) (in

Chinese).

Choudhary, J. Y., Ray, H. S. and Rai, K. N., “Elerctrophoretic Deposition of Alumina from

Trans. J. Br. Ceram. Soc., 81, 189-193 (1982).

Choy, J. H., Han, Y. S. and Kim J. T., “Hydroxide Coprecipitation Route to the Piezoelectric

Oxide Pb(Zr,Ti)O3 (PZT)”, J. Mater. Chem., 5 [1] 65-69 (1995).

Cipollins, N. E., “Emulsion-Char Method for Making Fine Powders”, US Patent 4,654,075,

March (1987).

References

210

Clasen, R., “Forming Compacts of Submicron Silica Particles by Electrophoretic Deposition”;

pp. 633-641 in Ceramics Powder Processing Science, Ed. by H. Hausner, G.L. Messing and

S. Hirano, The Am. Ceram. Soc. Inc., (1989).

Collier, J., Cornejo, I. A. and Haun, M. J., “Ferroelectric Thick-Films for Piezoelectric

Applications”, Ferroelectrics, 154, 47-52 (1994).

Coulter LS Series Reference, pp. 73 (1990).

Cousin, P., and Ross, R. A., “Preparation of Mixed Oxide: A Review”, Mater. Sci. & Eng.,

A130, 119-125 (1990).

Cowan, R. T., “Slip Casting”; pp. 154-157 in Treatise on Materials Science and Technology,

Vol. 9: Ceramic Fabrication Processes, Ed. by F. F. Y. Wang, Academic Press (1976).

Cramer, D., “High-Energy Milling of PZT”, in Ceramic Transactions, Vol. 51, Ceramic

Processing Science and Technology, Am. Ceram. Soc., (1995).

Cross, L.E., “Ferroelectric Materials for Electromechanical Transducer Applications”, Jpn. J.

Appl. Phys., 34, 2525-2532 (1995).

References

211

Curie, J., and Curie, P., “Developpement par compression de l’electricite polaire dans les

cristaux hemiedres a faces inclinees”, Bulletin de la Societe Mineralogique de France, 3, 90-

93 (1880) (in French).

Dawson, W. J., “Hydrothermal Synthesis of Advanced Ceramic Powders”, Am. Ceram. Soc.

Bull., 67 [10] 1673-78 (1988).

Demartin, M., Carry, C., and Setter, N., “The Influence of Processing and Microstructure on the

Piezoelectric and Mechanical Properties of Fine Grained PZT Ceramics”; pp. 393-396 in

Electroceramics IV, Vol. II (1994).

Dong, D., Xiong, M., Marakami, K. and Kanek, S., “Lowering of Sintering Temperature of

Pb(Ti,Zr)O3 Ceramics by the Addition of BiFeO3 and Bi(Cu0.5W0.5)O3”, Ferroelectrics, 145,

125-133 (1993).

Duran, P. and Moure, C., “Sintering at Near Theoretical Density and Properties of PZT

Ceramics Chemically Prepared”, J. Mater. Sci., 20, 827-837 (1985).

Eckert Jr., J. O., Hung-Houston, C. C., Gersten, B. L., Lencka, M. M., and Riman, R. E.,

“Kinetics and Mechanisms of Hydrothermal Synthesis of Barium Ti J. Am. Ceram. Soc.,

79 [11] 2929-39 (1996).

References

212

Faber, M., Lannuth, J., and Greil, P., “Preparation and Characterisation of PZT Submicron-

Powder”; in Ceramic Transactions, Vol. 51, Ceramic Processing Science and Technology,

Am. Ceram. Soc., (1995).

Fennelly, T. J., and Reed, J. S., “Mechanics of Pressure Casting”, J. Am. Ceram. Soc., 55 [5]

264-268 (1972).

Fergusson, J. E., The Heavy Elements: Chemistry, Environmental Impact and Health

Effects, Pergamon, Oxford (1990).

Friend, C., “Smart Materials: The Emerging Technology”, Materials World, 4 [1] 16-18 (1996).

Fukai, K., Ueda, N., Hidaka, K., Aoki, M., Abe, K. and Igarashi, H., “Easily Sinterable

Pb(Zr0.53Ti0.47)O3 Ceramic Powder from (Zr0.53Ti0.47)O3 Solid Solution”; pp. 741-748 in

Ceramic Transaction, Vol. 12, Ceramic Powder Science III, Ed. by G.L.Messing, S. Hirano

and H. Hausner, The Am. Ceram. Soc. Inc., (1990).

Geiger, G., “Powder Synthesis and Shape Forming of Advanced Ceramics”, Am. Ceram. Soc.

Bull., 74 [8] 62-65 (1995).

German, R. M., Sintering Theory and Practice, Chichester: Wiley, New York (1996).

References

213

Gerson, R., “Variation in Ferroelectric Characteristics of Lead Zirconate Titanate Ceramics Due

J. Appl. Phys., 31 [1] 188-194 (1960).

Gahdhi, M. V. and Thompson, B. S., pp. 175-184 in Smart Materials and Structures,

Chapman & Hall, London (1992).

Graule, T. J., Gauckler, L. J. and Baader, F. H., “Direct Coagulation Casting - A New Green

Shaping Technique, Part I: Processing Principles”; pp. 1601-1608 in Ceramics: Charting the

Future, Ed. by P. Vincenzini, Techna Srl, (1995 a).

Graule, T. J., Badder, F. H. and Gauckler, L. J., “Casting Uniform Ceramics With Direct

CHEMTECH., 6, 31-37 (1995 b).

Graule, T. J., Si, W., Baader, F. H., and Gauckler, L. J., “Direct Coagulation Casting (DCC):

Fundamentals of A New Forming Process for Ceramics”; pp. 457-461 in Ceramic Transactions,

Vol. 51, Ceramic Processing Science and Technology, Am. Ceram. Soc., (1995 c).

Greskovich, C., “Milling Treatise on Materials Science and Technology”; pp. 15-33 in Ceramic

Fabrication Processes, Vol. 9, Ed. by F. F. Y. Wang, Academic Press, New York (1976).

Guppy, R. M., and Atkison, A., “Cracking Behaviour of Sol-gel Films”; pp. 203-214 in Br.

Ceram. Proc. N49, Special Ceramics 9, The Institute of Ceramics (1992).

References

214

Haertling, G. H., “Intelligent Processing of Ferroelectric Films”, Am. Ceram. Soc. Bull., 73 [8]

68-73 (1994).

Haessler, W., Thielsch, R., and Mattern, N., “Structure and Electric Properties of PZT Thick

Films Produced by Plasma Spraying”, Mater. Lett., 24 [6] 387-391 (1995).

Hahn, L., Uchino, K. and Nomura, K., “On the Phenomenon of Morphotropic Tetragonal-

Rhombohedral Phase Boundary in the Ferroelectric Ceramics”, Jpn. J. Appl. Phys., 17 [4] 637-

641 (1978).

Hardtl, K. H., and Rau, H., “PbO Vapor Pressure in the Pb(Ti1-xZrx)O3 System”, Solid State

Commun., 7, 41-45 (1969).

Hennings, D., Rosenstein, G. and Schreinemacher, H., “Hydrothermal Preparation of Barium

Titanate from Barium-Titanium Acetate Gel Precursors”, J. Euro. Ceram. Soc., 8, 107-115

(1991).

Herbert, J. M., Ceramic Dielectrics and Capacitors, Gordon and Breach Sci. Pub., (1985).

Hewlett Packard Application Note 339-13, “Measuring the Dielectric Constant of Solid

Materials”, (1987).

References

215

Hiemenz, P. C., Principles of Colloid and Surface Chemistry, Dekker, New York (1977).

Hirashima, H., Onishi, E. and Nakagawa, M., “Preparation of PZT Powders From Metal

J. Non-Cryst. Solids, 121, 404-406 (1990).

Hirata, Y., Nishimoto, A., and Ishihara, Y., “Effect of Addition of Polyacrylic Ammonium on

Colloidal Processing of α-Alumina”, J. Ceram. Soc. Jpn. Int. Ed. 100, 972-978 (1992).

Hirata, Y., and Ozaki, T., “Rheology and Consolidation of Aqueous Suspension with

Nanometer-Sized BaTi1-xZrOxO3 Powders”, Mater. Lett., 15, 31-34 (1992).

Hiremath, B. V., Kingon, A. I. and Biggers, J. V., “Reaction Sequence in the Formation of Lead

Zirconate - Lead Titanate Solid Solution: Role of Raw Materials”, J. Am. Ceram. Soc., 66 [11]

790-793 (1983).

Horn, R. G., “Particle Interactions in Suspensions”; pp. 58-101 in Ceramic Processing, Ed. by

R.A. Terpstra, P.P.A.C. Pex and A.H. de Vries, Chapman & Hall, London (1995).

Hu, S., Li, S., Liang, H., Yu, D., and Mao, M., “Study on Preparation of PZT Crystalline

Powder for Piezoelectric Ceramics by Hydrothermal Processing Technique”, Chem. Eng. &

Metallurgy, 15 [1] 43-56 (1994) (in Chinese).

References

216

Huisman, W., Graule, T. J., and Gauckler, L.T., “Alumina of High-Reliability by Centrifugal

Casting”, J. Euro. Ceram. Soc., 15 [9] 811-821 (1995).

Hunter, R. J.; pp. 22-27 in Zeta Potential in Colloidal Science: Principles and Applications,

Academic Press Ltd., London (1981).

Hyatt, T. P., “Electronics: Tape Casting, Roll Compaction”, Am. Ceram. Soc. Bull., 74 [10] 56-

59 (1995).

Ichihara, T., Tsurumi, T., Asaga, K., Lee, K. H., and Daimon, M., “Hydrothermal Synthesis of

PZT Crystalline Powder and Piezoelectric Properties of Ceramics”, J. Ceram. Soc. Jpn. Int.

Ed., 98, 155-160 (1990).

Ichnose, N. and Kimura, M., “Preparation and Properties of Lead Zirconate Titanate

Piezoelectric Ceramics Using Ultrafine Particles”, Jpn. J. Appl. Phys., 30 [9B] 2220-2223

(1991).

Ikeda, T., Okana, T. and Watanabe, M., “A Ternary System PbO-TiO2-ZrO2”, Jpn. J. Appl.

Phys. 1 [4] 218-222 (1962).

References

217

Iler, R. K., “Inorganic Colloids for Forming Ultrastructures”; pp. 3-19 in Science of Ceramic

Chemical Processing, Ed. L. L. Hench & D. R. Ulrich, John Wiley & Sons Inc., (1986).

IRE Standards on Piezoelectric Crystals: “Measurements of Piezoelectric Ceramics”, Proc. IRE,

49, 1162 (1961).

Israelachvili, J. N.; pp. 248 in Intermolecular and Surface Forces, Academic Press Ltd.,

London (1992).

Jaffe, B., Roth, R. S., and Marzullo, S., “Piezoelectric Properties of Lead Zirconate Titanate

Solid–Solution Ceramics”, J. Appl. Phys., 25 [6] 809-810 (1954).

Jaffe, B., Cook Jr., W. R. and Jaffe, H.; pp. 117-142 in Piezoelectric Ceramics, Academic

Press, New York, (1971).

Janney, M. A., “Plastic Forming of Ceramics: Extrusion and Injection Moulding”, pp. 174-209 in

Ceramic Processing, Ed. by R. A. Terpstra, P.P.A.C. Pex and A.H. de Vries, Chapman & Hall

(1995).

Jones, D. J., Prasad, S. E. and Wallace, J. B., “Piezoelectric Materials and Their Applications”,

Key Eng. Mater., 122-124, 71-144 (1996).

References

218

Kakegawa, K., Mohri, J., Takahashi, T., Yamamura, H. and Shirasaki, S., “A Compositional

Fluctuation and Properties of Pb(Zr,Ti)O3”, Solid State Communications, 24, 769-772 (1977).

Kakegawa, K., Arai, K., Sasaki, Y. and Tomizawa, T., “Homogeneity and Properties of Lead

Zirconate Titanate Prepared by a Combination of Thermal Decomposition Method With Solid-

state Reaction”, J. Am. Ceram. Soc., 77 [1] C 49- C 52 (1988).

Kakegawa, K., Matsunaga, O., Kato, T. and Sasaki, Y., “Compositional Change and

Compositional Fluctuation in Pb(Ti, Zr)O3 Containing Excess PbO”, J. Am. Ceram. Soc., 78 [4]

1071-1075 (1995).

Kendall, K., Alford, N. McN, Clegg, W. J. and Birchall, J. D., “High Strength and Weibull

Modulus From Colloidal Processing of Ceramics”; pp. 79-89 in Br. Ceram. Proc., N45,

Fabrication Technology, Ed. by R. W. Davidge and D. P. Thompson, (1990).

Kim, S., Lee, G. S., Shrout, T. R. and Venkataramani, S., “Fabrication of Fine-Grain

Piezoelectric Ceramics Using Reactive Calcination”, J. Mater. Sci., 26, 4411-4415 (1991).

Kimura, T., and Yamaguchi, T., “Morphology Control of Electroceramic Powders by Molten

-177 in Advances in Ceramics, Vol. 21, Ceramic Powder Science, Ed.

by G. L. Messing et al., Am. Ceram. Soc. Inc., (1987).

References

219

Kimura, T., Takenaka, A., Mufine, T., Hayashi, Y. and Yamaguchi, T., “Preparation of Needle-

Like TiZrO4 and PZT Powders”, J. Mater. Sci., 27, 1479-1483 (1992).

Kiss, K., Mager, J., Vkasovich, M. S. and Lockhart, R. J., “Ferroelectrics of Untrafine

Ceramics I, Synthesis of Titanate Powders of Ultrafine Size”, J. Am. Ceram. Soc., 49 [6] 291-

296 (1966).

Komarneni, S., Li, Q., Stefansson, K. M., and Roy, R., “Microwave-Hydrothermal Processing

for Synthesis of Electroceramic Powders”, J. Mater. Res., 8 [12] 3176-3183 (1993).

Kudo, S, Tashiro, S., and Igarashi, H., “Oxygen Atmosphere Firing of Piezoelectric Lead

Zirconate Titanate Ceramics Substituted with Lead Antimonate Niobate Having Submicron

Particle size”, Jpn. J. Appl. Phys., 34 [9B] 5303-5305 (1995).

Kulig, M., Preu, G., Cramer, D. and Lubitz, K., “High-performance PZT Ceramics From

Hydrothermally Synthesised Precursor Powders”; pp. 2493-2498 in Ceramics: Charting the

Future, Ed. by P. Vincenzini, Techna Srl., (1995).

Kutty, T. R. N. and Balachandran, R., “Direct Precipitation of Lead Zirconate Titanate by the

Hydrothermal Method”, Mater. Res. Bull., 19, 1479-88 (1984).

References

220

Kutty, T. R. N. and Padmini, P., “A Method for the Preparation of High Purity Lead Titanate

Zirconate Solid Solutions by Carbonate-Gel Composite Powder Precipitation, J. Mater. Chem.,

7 [3] 521-526 (1997).

Laaziz, I., Larbot, A., Julbe, A., Guizard, C. and Cot, L., “Hydrolysis of Mixed Titanium and

Zirconium Alkoxide by a Esterfication Reaction”, J. Solid State Chem., 98, 393-403 (1992).

Lal, R., and Krishnam, R., “Preparation and Characterisation of Submicron Reactive PZT

Mater. Sic. & Eng., 96, L25-L29 (1987).

Lange, F. F., and Miller, K. T., “Pressure Filtration: Consolidation Kinetics and Mechanisms”,

Am. Ceram. Soc. Bull., 66 [10] 1498-1504 (1987).

Lange, F. F., “Powder Processing Science and Technology for Increased Reliability”, J. Am.

Ceram. Soc., 72 [1] 9-15 (1989).

Lang, F. F., “Liquid Precursors for Ceramics: Kinetically Limited Crystallisation, Spherical

Particles, Fibers, and Thin Films”; pp. 611-626 in Chemical processing of Advanced

Materials, Ed. by L. L. Hench and J. K. West, John Wiley and Sons, Inc.(1992).

Laudise, R. A., “Hydrothermal Synthesis of Crystals”, J. Chem. Eng. News, 9, 30-43 (1987).

References

221

Lee, K. H., Asaga, K., Ichihara, T. and Daimon, M., “Synthesis of PZT Crystalline Powders by

Reaction of Aqueous Solution Below 200°C”, Yogyo-Kyokai-Shi, 95 [7] 74-78 (1987) (in

Japanese)

Lemoine, L., Leriche, L., Tronic, P., and Thierry, B., “Optimisation of Synthesis Parameters of

PZT Powder through Hydrothermal Routes”, in Advance in Ceramics: Charting the Future,

Ed. By P. Vincenzini, Technical Srl., (1995).

Lencka, M. M., Anderko, A and Riman, R. E., “Hydrothermal Precipitation of Lead Zirconate

Titanate Solid Solutions: Thermodynamic Modelling and Experiment Synthesis”, J. Am. Ceram.

Soc., 78 [10] 2609-18 (1995).

Leong, Y. K., Scales, P.J., Healy, T. W., Boger, D. V., and Buscall, R., “Rheology and

Evidence of Adsorbate-Mediated Short-Range Steric Forces in Concentrated Dispersions”, J.

Chem. Soc. Faraday Trans., 89, 2473-2478 (1993).

Lewis Jr., W. T., “Drying Pressing Technical Ceramics”, Am. Ceram. Soc. Bull., 74 [4] 103-

106 (1996).

Lin, C. H., Pei, S. C. and Chin, T. S., “Hydrothermal Synthesis of PbTi1-xZrxO3 Ceramic

Powder”; pp. 261-274 in Ceramic Transactions, Vol.32, Dielectric Ceramics: Processing,

Properties and Applications, (1993)

References

222

Lin, C. H., Chin, T. S., and Pei, S. C., “PZT Ceramics from Hydrothermally Synthesised

(1994).

Livage, J., “Molecular Design of Transition Metal Alkoxide Precursors”; pp. 3-22 in Chemical

Processing of Ceramics, Ed. by B. I. Lee and E. I. A. Pope, Marcel Dekker Inc., (1994).

Lopez, M. C. B., Rand, B., and Riley, F. L., “Aqueous Phase Dispersion of Barium Titanate

Using Anionic and Cationic Polyelectrolytes”; pp. 359-362 in Electroceramics V, Book 2

(1996).

Luebke, D. V., “Preparation of Zirconia and Hafnia Sols”, US Patenet 3,442,817 (1969).

Luther, E. P., Yanez, J. A., Franks, G. V., Lange, F. F. and Pearson, D. S., “Effect of

Ammonium Citrate on the Rheology and Particle Packing of Alumina Slurries”, J. Am. Ceram.

Soc., 78 [6] 1495-1500 (1995).

Mabud, S. A., “The Morphotropical Phase Boundary in PZT Solid Solution”, J. Appl. Cryst.,

13, 211-216 (1980).

References

223

Maher, G. H., Hutchins, C. E., and Ross, S. D., “Preparation and Characterisation of Ceramic

Fine Powders Produced by the Emulsion Process”, Am. Ceram. Soc. Bull., 75 [5] 72-76

(1993).

Margolis, E. J., Chemical Principles in Calculations of Ionic Equilibria, Macmillan, New

York, (1966).

Martrena, H. T., and Burfoot, J. C., “Grain Size Effects on Properties of Some Ferroelectric

J. Phys. C: Solid State Phys., 7, 3182-3192 (1974).

Matsuo, Y. and Sasaki, H., “Formation of Lead Zirconate Titanate Solid Solutions”, J. Am.

Ceram. Soc., 48 [6] 289-291 (1965).

Mccolm, I. J., “Special Ceramics for Modern Applications: Which? Why? How?”; pp. 1-33 in

Ceramic Processing, Ed. by R. A. Terpstra, P.P.A.C. Pex and A.H. de Vries, Chapman & Hall

(1995).

McNamara, V. M., “A Wet Chemical Method for the Preparation of Oxide Mixtures Applicable

J. Can. Ceram. Soc., 34, 103-120 (1965).

References

224

Merle-Mejean, T., Jaccon, T. and Vesteghem, H., “Synthesis and Thermal Behaviour of

Zirconium Oxyacetate Powders”; pp. 41-48 in Ceramic Powder Science III, Ed. by G. L.

Messing, S. Hirano and H. Hausner, Am. Ceram. Soc. Inc., Westerville, OH (1990).

Messing, G. L., Zhang, S. C., and Tayanthi, G. V., “Ceramic Powder Synthesis by Spray

Pyrolysis”, J. Am. Ceram. Soc., 76 [11] 2707-2726 (1993).

Mishra, S. K. and Pandey, D., “Effect of Particle Size on the Ferroelectric Behaviour of

Tetragonal and Rhombohedral Pb(ZrxTi1-x)O3 Ceramics and Powders”, J. Phys.: Condens.

Matter, 7, 9287-9303 (1995)

Mistler, R. E., “Tape Casting: the Basic Process for Meeting the Needs of the Electronic

Am. Ceram. Soc. Bull., 69 [6] 1022-1026 (1990).

Morten, B., De Cicco, G., and Prudenziatti, M., “Resonant Pressure Sensor Based on

Piezoelectric Properties of Ferroelectric Thick Films”, Sensors and Actuators, A – Physical, 31

[1-3] 153-158 (1992).

Moulson, A. J. and Herbert, J. M., pp. 265-276 in Electroceramics: Materials, Properties

and Applications, Chapman & Hall (1991).

References

225

Murata, M., Wakino, K., Tanaka, K. and Hamakawa, Y., “Chemical Preparation of PLZT

Powder From Aqueous Solution”, Mater. Res. Bull., 11, 323-328 (1976).

Mutsuddy, B. C., and Ford, R. G., pp. 1-26 in Ceramic Injection Moulding, Chapman & Hall,

(1995).

Nagai, M., Yamashita, K., Umegaki, T., and Takuma, Y., “Electrophoretic Deposition of

Ferroelectric Barium Titanate Thick Films and Their Dielectric Properties”, J. Am. Ceram. Soc.,

76 [1] 253-255 (1993).

Nakamoto, T., pp. 220-224 in Infra-Red and Raman Spectra of Inorganic and Coordination

Compounds, John Wiley & Sons, New York (1970).

Newnham, R. E., Structure-Property Relations, Springer Verlag, New York, (1975).

Newnham, R. E. and Ruschau, G. R., “Smart Electroceramics”, J. Am. Ceram. Soc., 74 [3]

463-80 (1991).

Newnham, R. E., Udagakumar, K. R., and Trolier-Mckinstry, S., “Size Effect in Ferroelectric

Thin Films”; pp. 379-393 in Chemical Processing of Advanced Materials, Ed. By L. L. Hench

and J. K. West, John Wiley & Sons Inc., New York (1992).

References

226

Newnham, R. E., “Molecular Mechanisms in Smart Materials”, MRS Bull., 22 [5] 20-34 (1997).

Nieto, E., Fernandez, J. F., Moure, C. and Duran P., “Multilayer Piezoelectric Devices Based on

J. Mater. Sci.: Mater. in Electronics, 7, 55-60 (1996).

Nishizawa, H., Yamasaki, N., Matsuoka, K., and Mitsushio, H., “Crystallisation and

Transformation of Zirconia Under Hydrothermal Conditions”, J. Am. Ceram. Soc., 65 [7] 343-

346 (1982).

Noma, T., Wada, S., Yano, M., and Suzuki, T., “Analysis of Lattice Vibration in Fine Particles

of Barium Titanate Single Crystal Including the Lattice Hydroxyl Group”, J. Appl. Phy., 80 [9]

5223-33 (1996).

Nye, J. K., Physical Properties of Crystals, Clarendon Press, Oxford (1990).

Ogawa, T., “High Functional and High-performance Piezoelectric Ceramics”, Am. Ceram. Bull.,

70 [4] 1042-1049 (1991).

Ogihara, T., Kaneko, H. and Mizutani, N., “Preparation of Monodispersed Lead Zirconate-

Titanate Fine Particles”, J. Mater. Sci. Lett., 7, 867-869 (1988).

References

227

Ohba, Y., Miyauchi, M., Sakai, E. and Daimon, M., “Hydrothermal Synthesis of Lead Zirconate

Titanate Thin Films Fabricated by A Continuous-Supply Autoclave”, Jpn. J. Appl. Phys., 34

[9B] 5216-5219 (1995).

Ohba, Y., Rikitoku, T., Tsurumi, T. and Daimon, M., “Precipitation of Lead-Zirconate-Titanate

Powders Under Hydrothermal Conditions”, J. Ceram. Soc. Jpn., 104 [1] 6-10 (1996).

Ohtaka, O., Muhll, R. V. D., and Ravez, J., “Low-temperature Sintering of Pb(Ti,Zr)O3

ceramics with the Aid of Oxyfluride Additive: X-ray Diffraction and Dielectric Studies”, J. Am.

Ceram. Soc., 78 [3] 805-808 (1995).

Okazaki, K., and Nagata, K., pp. 402-412 in Mechanical Behaviour of Materials, Vol. 4, The

Society of Materials Science, Japan (1972).

Okazaki, K. and Nagata, K., “Effects of Grain Size and Porosity on Electrical and Optical

Properties of PLZT Ceramics”, J. Am. Ceram. Soc., 56 [2] 82-86 (1973).

Okamura, S., Tsukamoto, T., and Kora, N., “Fabrication of Ferroelectric BaTiO 3 Films by

Electrophoretic Deposition “, Jpn. J. Appl. Phys., 32, 4182-4185 (1993).

Omatete, O. O., Janney, M. A., and Strehlow, R. A., “Gelcasting A New Ceramic Forming

Process”, Am. Ceram. Soc. Bull., 70, 1641-1646 (1991).

References

228

Ostertag, R., Rinn, G., Tunker, G. and Schmidt, H., “Preparation and Properties of Sol-Gel-

Derived PZT Powders”; pp. 11-20 in Brit. Ceram. Proc., 41, Electroceramics, Ed. By A. J.

Moulson, J. Binner and R. Morrell. The Institute of Ceramics, Stoke-on-Trent, UK (1989).

Park, J. H., Kim, B. K., Song, K. H. and Park, S. J., “Piezoelectric Properties of Nb2O5 Doped

and MnO2-Nb2O5 Co-doped Pb(Zr0.53Ti0.47)O3 Ceramics”, J. Mater. Sci.: Mater. in

Electronics, 6, 95-101(1995).

Pearce, D. H. and Ponton, C. B., “Optimisation of Alumina Slip for Pressure Filtration”, Ceram.

Eng. & Sci. Proc., 15 [5] 1076-1083 (1994).

Pearce, D. H., Dolman, G., Smith, P. A. and Button, T. W., “Colloidal Processing of Lead

Zirconate Titanate (PZT)”; pp. 385-388 in Proc. Electroceramics IV, Volume II, (1994).

Pierre, A. C., “Sol-Gel Processing of Ceramic Powders”, Am. Ceram. Soc. Bull., 70 [8] 1281-

88 (1991).

Polli, A. D. & Lange, F. F., “Pyrolysis of Pb(Zr0.5Ti0.5)O3 Precursors: Avoiding Lead

Partitioning”, J. Am. Ceram. Soc., 78 [12] 3401-3404 (1995).

References

229

Ponton, C. B., “An Overview of Hydrothermal and Emulsion Processing of Multiphase Ceramic

Precursor Sols”; pp. 189-194 in Third Euro-Ceramics, Vol.1, Processing of Ceramics, Ed. by

P. Duran and J. F. Feranadez (1993).

Potdar, H. S., Deshpande, S. B., Ramaswamy, V., Godbole, P. D., and Date, S. K., “Synthesis

of Active PZT Powders via Molecular Precursor Route”, Ind. J. Chem., 32A, 1037-1040

(1993).

Richardson, D. W., Modern Ceramic Engineering: Properties, Processing, and Use in

Design, Second Ed., Marcel Dekker, New York (1992).

Riman, R. E., “The Chemical Synthesis of Ceramic Powders”; pp. 29-62 in Surface and

Colloidal Chemistry in Advanced Ceramic Processing, Ed. by R. J. Pugh and L. Bergstrom,

Marcel Dekker, Inc., (1995).

Rossetti, Jr., G. A., Watson, D. J., Newnham, R. E. and Adair, J. H., “Kinetics of the

Hydrothermal Crystallisation of the Perovskite Lead Titanate”, J. Crystal Growth, 116, 251-

259 (1992).

Sanchez, C., Babonneau, F., Doeuff, S., and Leaustic, A., “Chemical Modifications of Titanium

-87 in Ultrastructure Processing of Advanced Ceramics, Ed. by

J. D. Mackenzie and D. R. Ulrich, John Wiley & Sons (1988).

References

230

Sarkar, P. and Nicholson, P. S., “Electrophoretic Deposition (EPD): Mechanisms, Kinetics, and

J. Am. Ceram. Soc., 79 [8] 1987-2002 (1995).

Schwartz, R. W., Payne, D. A., and Eichorst, D. J., “Precipitation and Properties of PZT and

-498 in Ultrastructure Processing of Advanced Ceramics, Ed. by J.

D. Mackenzie and D. R. Ulrich, John Wiley & Sons (1988).

Seffner, L., and Gesemann, H. J., “Preparation and Application of PZT Thick Films”; pp. 317-

320 in Electroceramics IV, Vol. II (1994).

Segal, D. L., Chemical Synthesis of Advanced Ceramic Materials, Cambridge University

Press (1989).

Segal, D. L., “Developments in the Synthesis of Nano-sized Ceramic Powders”; pp. 1-14 in Br.

Ceram. Soc. Proc., N51, Nanoceramics, Ed. by R. Freer (1993).

Sengupta, S. S., Ma, L., Adler, D. L. and Payne, D.A., “Extended X-ray Absorption Fine

Structure Determination of Local Structure in Sol-Gel-Derived Lead Titanate, Lead Zirconate

and Lead Zirconate Titanate”, J Mater. Res., 10 [6] 1345-1348 (1995).

References

231

Shirane, G., and Suzuki, K., “Crystal Structure of Pb(Zr, Ti)O3”, J. Phys. Soc. Jpn. 7, 333-336

(1952).

Shirasaki, S., Takahashi, K. and Kakegawa, K., “Ferroelectric - Paraelectric Phase Transition in

Lead Titanate Containing Lattice Defects”, J. Am. Ceram. Soc., 56 [8] 430-435 (1973).

Shrout, T. R., Papet, P., Kim, S. and Lee, G. S., “Conventionally Prepared Submicrometer Lead

Based Perovskite Powders by Reactive Calcination”, J. Am. Ceram. Soc., 73 [7] 1862-1867

(1990).

Singh, A. P., Mishra, S. K., Pandey, D, Parsad, Ch. D. and Lal, R., “Low-Temperature

Synthesis of Chemically Homogeneous Lead Zirconate Titanate (PZT) Powders by a Semi-Wet

Method”, J. Mater. Sci., 28, 5050-5055 (1993).

Smith, G.D., Caughlan, C.N. and Campbell, J. A., “Crystal and Molecular Structure of Di-µ-

oxo-bis(diacetylacetonatotitanium(IV))-bisdioxane, (TiO(C5H7O2)2)2.2C4H8O2, and Di-µ-oxo-

bis(diacetylacetonatitanium (IV)), (TiO(C6H7O2)2)2”, Inorg. Chem., 11 [12] 2989-2993

(1972).

Snow, G. S., “Elimination of Porosity in Pb(Zr,Ti)O3 Ceramics by Liquid-Phase Sintering”, J.

Am. Ceram. Soc., 57 [6] 272-275 (1974).

References

232

Strock, H. B., “Emerging Smart Materials System”, Am. Ceram. Soc. Bull., 75 [4] 71-76

(1996).

Su, B., Button, T. W., and Ponton, C. B., “Low-Temperature, Aqueous Processing of Lead

Zirconate Titanate (PZT) Ceramics”, presented at Ceramics Convention - Better Ceramics

Through Processing, Cirencester, England, 8-10 April, (1997a)

Su, B., Button, T. W. and Ponton, C. B., “Control of Particle Size and Morphology of

Hydrothermally Synthesised Lead Zirconate Titanate (PZT) Powders”, to be submitted to J. Am.

Ceram. Soc., (1997b).

Su, B., Button, T. W., and Ponton, C. B., “Hydrothermal Formation of Perovskite Lead

Zirconate Titanate (PZT) Powders”, to be published in Review of High Pressure Science and

Technology, 7 (1998), in press.

Sugiyama, S., Takagi, A. and Tsuzuki, K., “(Pb, La)(Zr, Ti)O3 Films by Multiple Electrophoretic

Deposition/Sintering Processing”, Jpn. J. Appl. Phys., 30 [9B] 2170-2173 (1991).

Suzuki, M., Uedaira, S., Masuya, H., and Tamura, H., “Hydrothermal Synthesis of Lead Titanate

-170 in Ceramic Transactions, Ceramic Powder Science II, A, Vol. 1,

Ed. By G. L. Messing, E. R. Fuller, Jr, and Hans Hausner, The Am. Ceram. Soc. Inc.,

Westerville, OH (1988).

References

233

Swartz, S. L., Shrout, T. R., and Takenaka, T., “Electronic Ceramics R&D in the U.S., Japan,

Am. Ceram. Soc. Bull., 76 [7] 59-65 (1997).

Takahashi, M., “Space Charge Effect in Lead Zirconate titanate Ceramics Caused by the

Jpn. J. Appl. Phys., 9 [10] 1236-1246 (1970).

Takahashi, M., “Electric Resistivity of Lead Zirconate Titanate Ceramics C

Jpn. J. Appl.Phys., 10 [5] 643-651 (1971).

Takahashi, S., “Internal Bias Field Effects in Lead Zirconate-Titanate Ceramics Doped with

Multiple Impurities”, Jpn. J. Appl. Phys., 20 [1] 95-101 (1981).

Thomson, Jr, J., “Chemical Preparation of PLZT Powders from Aqueous Nitride Solution”, Am.

Ceram. Soc. Bull., 53, 421-433 (1974).

Velamakanni, B. V., Chang, J. C., Lange, F. F., Pearson, D. S., “New Method for Sufficient

Colloidal Particle Packing via Modulation of Repulsive Lubricating Hydration Forces”,

Langmuir, 6, 1323-1325 (1990).

Vesteghem, H., Lecomte, A. and Dunger, A., “Film Formation and Sintering of Colloidal

J. Non-Cryst. Solids, 147 & 148, 530-507 (1992).

References

234

Wada, S., Suzuki, T. and Noma, T., “Role of Lattice Defects on the Size Effect of Barium

Titanate Fine Particles- A New Model”, J. Ceram. Soc. Jpn., 104 [5] 383-392 (1996).

Wang, H. W., Hall, D. A., and Sale, F. R., “Phase Homogeneity and Segregation in PZT

Powders Prepared by Thermal Decomposition of Metal-EDTA Complexes Derived From

Nitrate and Chloride Solutions”, J. Am. Ceram. Soc., 75 [1] 24-31 (1992).

Watanabe, H., Patel, S. S., Argillier, J. F., Parsonage, E. E., Mays, J., and Danbrandon, N., and

Tirrell, M., “Manipulating Solid-Surface Properties with Polymer Agents”, Mater. Res. Soc.

Symp., 249, 255-265 (1992).

Watson, D. J., Randall, C. A., Newnham, R. E., and Adair, J. H., “Hydrothermal Formation

Diagram in the Lead Titanate System”; pp. 154-162 in Ceramic Transaction, Ceramic Powder

Science II, A, Vol.1, Ed. by G. L. Messing, The Am Ceram. Soc., Inc., Westerville, OH (1988).

Wells, A. F., Structural Inorganic Chemistry, Clarendon Press, Oxford (1975).

Wen, J., Tomandl, G. and Stiegelschmitt, A., “Electrophoretic Mobility in Ceramic Suspensions:

Influence on Sintering Behaviour”; pp. 325-329 in Second Euro-Ceramics, Vol. 1, Basic

Science and Processing of Ceramics, Ed. by G. Ziegler and H. Hausner, Deutsche Keramische

Gesellschaft e.v. (1991).

References

235

Weston, T. B., Webster, A. H., and McNamara, V. M., “Lead Zirconate – Lead Titanate

Piezoelectric Ceramics with Iron Oxide Additives”, J. Am. Ceram. Soc., 52 [5] 253-257

(1969).

Wheast, R. C., Astle, M. J. and Beyer, W. H.; B65-B158 in CRC Handbook of Chemistry

and Physics, CRC Press Inc., (1984).

White, J. L., and Dee, H. B., “Flow Visualisation for Injection Moulding of Polyethylene and

Polym. Eng. & Sci., 14, 212-222 (1974).

Whorlow, R. W.; pp. 17 in Rheological Techniques, Second Ed., Ellis Howwood Ltd, (1992).

Wilkinson, A. P., Speck, J. S., Cheetham, A. K., Natarajam, S, and Thomas, J. M., “In Situ X-

ray Diffraction Study of Crystallisation Kinetics in PbZr1-xTixO3 (PZT, x = 0.0, 0.55, 1.0)”,

Chem. Mater., 6, 750-754 (1994).

Witham, J. P., Ravindaranatham, P., and Dougherty, D., “Hydrothermal Preparation of Lead-

Zirconate-Titanate (PZT) Ceramics”, in Proc. ISAF’94 (1994).

Wyckoff, R. W. G., Crystal Structures, Second Edition, Vol.1, John Wiley & Sons Inc.,

(1965).

References

236

Xu, Y.; pp. 101-210 in Ferroelectric Materials and Their Applications, North Holland

(1991).

Yamamoto, A. and Kamakaw, S., “Structure of the Reaction Products of Tetraalkoxytitanium

with Acetylacetone and Ethyl Acetoacetate”, J. Am. Chem. Soc., 79, 4344-4348 (1957).

Yamamoto,T., Shimizu, Y., and Watanabe, M., “Nb2O5 Additive Effects for Sintering and

Electrical Properties in Pb(Zr0.53Ti0.47)O3 Ceramics Using Hydrothermally Produced Powder”, J.

Ceram. Soc. Jpn. Int. Ed., 98, 41-46 (1989).

Yamamoto, T., Tanaka, R., Okazaki, K. and Ueyama, T., “Microstructure of Pb(Zr0.53Ti0.47)O3

Ceramics Synthesised by Partial Oxalate Method (Using (Zr0.53Ti0.47)O3 Hydrothermal Produced

Powder As a Core of Pb(Zr0.53Ti0.47)O3)”, Jpn. J. Appl. Phys. Vol. 28, Supplement 28-2, 67-

70 (1989).

Yamamoto, T., “Optimum Preparation Methods for Piezoelectric Ceramics and Their

Evaluation”, Am. Ceram. Soc. Bull., 71 [6] 978-985 (1992).

Yi, G., and Sayer, M., “Sol-gel Processing of Complex Oxide Films”, Am. Ceram. Soc. Bull.,

70 [7] 1173-1179 (1991).

References

237

Zhang, X. L., Chen, Z. X., Cross, L. E., and Schulze, W. A., “Dielectric and Piezoelectric

Properties of Modified Lead Titanate Zirconate Ceramics from 4.4 K to 300 K”, J. Mater. Sic.,

18 [4] 968-972 (1983).

Zhang, H., Uusimaki, A., Leppavuori, S., and Karijalainen, P., “Phase Transition Revealed by

Raman Spectroscopy in Screen-Printed Lead Zirconate Titanate Thick Films”, J. Appl. Phys. 76

[7] 4294-4300 (1994)

Zhu, W., Liu, Z. Q., Tse, M. S., and Tan, H. S., “Raman, FT-IR and Dielectric Studies of PZT

40/60 Films Deposited by MOD Technology”, J. Mater. Sci. Mater. in Electronics, 6 [6] 369-

74 (1995).

Zhuang, Z. Q., Haun, M. J., Jang, S. J. and Cross, L. E., “Fabrication and Characterisation of

Pure Homogeneous PZT Ceramics From Sol-Gel Derived Powders”, Adv. Ceram. Mater., 3,

485-490 (1988).