References

[1] Hitomi , Katsundo ( 1996 ) Manufacturing Systems Manufacturing , London : Taylor and Francis . [2] Omar , M.A. , Kurfess , T. , Mears , L. , and Kiggans , R. ( 2009 ) “ Organizational learning in the auto-

motive manufacturing; a strategic choice , ” Journal of Intelligent Manufacturing , ISSN 0956 - 5515, DOI 10.1007/s10845 - 009 - 0330 - 6.

[3] Automotive News ( 2004 ) Market Data Book . [4] Xu , Yanwu ( 2006 ) Modern Formability; Measurement, Analysis, and Applications , Cincinnati,

OH : Hanser Gardner . [5] Keeler , S.P. , Backofen , W.A. ( 1963 ) ASM Trans. Q. , 56 , 25 – 48 . [6] Goodwin , G.M. ( 1968 ) “ Application of strain analysis to sheet metal forming problems in the

press shop ” , La Metallurgica , 60 , 767 – 774 . [7] Yoshida , K. ( 1993 ) Handbook of Ease Or Diffi culty in Press Forming , translated from Japanese,

National Center for Manufacturing Science, Inc. , Ann Arbor, MI . [8] Greene , William H. Maximum likelihood estimation of stochastic frontier production models ,

ASTM E 646. [9] Davies , G. ( 2003 ) Materials for the Automobile Bodies , Oxford : Elsevier Butterworth Heinemann . [10] American Iron and Steel Institute ( 2003 ) “ Formability characterization of a new generation of high

strength steel ” , American Iron and Steel Institute Reports, March 2003, available at www.steel.org [accessed on August 5, 2010].

[11] American Iron and Steel Institute ( 2001 ) “ Characterization of Fatigue and Crash Worthiness of New Generation of High Strength Steel FOR Automotive Applications (Phase I and Phase II) , ” American Iron and Steel Institute Reports, January 2001, available at www.steel.org [accessed on August 5, 2010].

[12] Aluminum Association ( 1998 ) Aluminum Automotive Extrusion Manual , Publication AT6, Washington, DC : Author .

[13] Cantor , Brian , Grant , Patrick , Johnston , Colin ( 2008 ) Automotive Engineering, Lightweight, Functional and Novel Materials , New York : Taylor & Francis .

[14] Kaufman , J. , Gilbert , P. ( 2000 ) Introduction to Aluminum Alloys and Tempers , The Aluminum Association Inc, published by the ASM International Materials Park , OH .

[15] European Aluminum Association ( 2004 ) “ Aluminum in commercial vehicles , ” Brussels, Belgium, available at www.eaa.net [accessed on August 5, 2010].

[16] Boljanovic , V. ( 2004 ) Sheet Metal Forming Processes and Die Design , New York : Industrial Press .

The Automotive Body Manufacturing Systems and Processes Mohammed A. Omar

© 2011 John Wiley & Sons Ltd. ISBN: 978-0-470-97633-3

362 References

[17] Aoki , Itrau , Horita , Takashi , Herari , Toshio ( 1981 ) “ Formability and applications of galvanized sheet steels ” , Proc. Materials/Metal Working Technology Conference , American Society of Metals, Michigan, April.

[18] Automotive Steel Partnership Report ( 2001 ) “ Tailor Welded Blank Applications and Manufacturing , ” June, available at www.a - sp.org [accessed on August 5, 2010].

[19] Auto Steel Partnership Report ( 2001 ) “ Blank Applications and Manufacturing , ” June available at www.a - sp.org [accessed on August 5, 2010].

[20] Ko ç , Muammer ( 2008 ) Hydro - forming for Advanced Manufacturing , Boca Raton, FL : CRC Press . [21] Klaas , F. ( 1997 ) “ Innovations in high - pressure hydro - forming ” , Proc 2nd Int Conf on Innovations

in Hydroforming Tech , Columbus OH, 1 – 31 . [22] Automotive Steel Partnership Report ( 1999 ) “ Automotive body measurement system capability , ”

available at www.a - sp.org [accessed on August 5, 2010]. [23] Automotive Steel Partnership Report ( 2002 ) Automotive Steel Design Manual , available at

www.a - sp.org [accessed on August 5, 2010]. [24] Carey , Howard. ( 1995 ) Arc Welding Automation , New York : Marcel Dekker . [25] Omar , M.A. , Kuwana , K. , Saito , K. , Couch , C. ( 2007 ) “ Thermography for investigating industrial

welding fi res in automotive stations , ” Journal of Fire Technology , 43 ( 4 ): 319 – 329 . [26] Kalpakjian , Serope , Schmid , Steven ( 2000 ) Manufacturing Engineering and Technology , New

Jersey : Prentice Hall . [27] Dickerson , D.W. , Natale , T.V. ( 1981 ) “ The effect of sheet surface on spot weldability, materials/

metal , ” Proc . Working Technology Conference , American Society of Metals. Michigan, April, [28] Adams , A.D. ( 2005 ) Adhesive Bonds: Science and Technology , Cambridge : CRC Press . [29] Cordes , E. ( 2003 ) “ Adhesives in the automotive industry ” , in A. Pizzi , K. Mittal (Eds.), Handbook

of Adhesive Technology , second edition , New York , Marcel Dekker , pp. 999 – 1015 . [30] Petrie , J. ( 2000 ) Handbook of Adhesives and Sealants , New York : McGraw - Hill . [31] Zisman W.A. ( 1964 ) Contact Angle, Wettability and Adhesion , American Chemical Society . [32] Nara , K.R. , Omar , M.A. ( 2009 ) “ Sensitivity analysis of non - load bearing 2K epoxy adhesive to

hemming process variations, thermo - gravimetric, differential scanning calorimetry and FTIR analyses , ” Journal of Progress in Organic Coatings , 65 , 104 – 108 .

[33] Messler , R.W. Jr . ( 1993 ) Principles of Welding: Processes, Physics, Chemistry, and Metallurgy , New York : John Wiley and Sons, Inc.

[34] Messler , R.W. Jr . ( 1999 ) Joining of Advanced Materials , New York : Butterworth - Heinemann . [35] Roobol , N. ( 2003 ) Industrial Painting and Powder - coating; Principles and Practices , Cincinnati,

OH : Hanser Gardner . [36] Lou , H.H. , Huang , Y.L. ( 2000 ) “ Integrated modeling and simulation for improved reactive drying

of clearcoat , ” Industrial Engineering Chemistry Res. 39 : 500 . [37] Xiao , Jie. , Jia Li , Helen , Lou , H. , Huang , Yinlun ( 2006 ) “ Cure - window - based proactive quality

control in topcoat curing ” , Industrial Engineering Chemistry Res , 45 : 2351 – 2360 . [38] Zeng , F. , Ayalew , B. , Omar , M.A. ( 2008 ) “ Robotic automotive paint curing using thermal signature

feedback ” , Journal of Industrial Robotics , 36 ( 4 ): 389 – 395 . [39] Hunter , Harold ( 1987 ) The Measurement of Appearance , New York : John Wiley Inter - science . [40] Graedel , Thomas , Allenby , Braden ( 1995 ) Industrial Ecology , New Jersey : Prentice Hall . [41] Clarke , G. ( 2005 ) Automotive Production Systems and Standardization, from Ford to the Case of

Mercedes - Benz , Heidelberg : Physica - Verlag . [42] Galitsky , C. , Worrell , E. ( 2003 ) Energy Effi ciency Improvement and Cost Saving Opportunities

for the Vehicle Assembly Industry , Ernest Orlando Lawrence Berkeley National Laboratory, Environmental Energy Technologies Division .

[43] Patil , Y. , Seryak , J. , Kissock , K. , Kissock , K. ( 2003 ) “ Benchmarking approaches: an alternate method to determine best practice by examining plant - wide energy signature , ” ACEEE Summer Study on Energy - Effi ciency in Industry, www.aceee.org [accessed January, 5, 2010].

References 363

[44] Ross , M. , Thimmapuran , P. ( 1993 ) “ Long term industrial energy forecasting LIEF model ” , Argonne National Laboratory. www.transportation.anl.gov [accessed July 20, 2009 ].

[45] Automotive Parts Manufacturer Association APMA, technical publications ( 2000 ), Obtained through the internet: www.apma.ca [accessed May 15, 2009].

[46] Graedel , Thomas , Allenby , Braden ( 1997 ) Industrial Ecology and the Automobile , New Jersey : Prentice Hall .

[47] Stodolsky , F. , Vyas , A. , Cuenca , R. , Gaines , L. ( 1995 ) “ Life cycle energy savings potential from Aluminum Intensive Vehicles , ” Proc. Total Life Cycle Conference and Exposition , October 16 – 19 , 1995. Vienna, Austria.

[48] Greene (1993) Journal of Econometrics Volume 18, Issue 2 , February 1982, Pages 285 – 289 . [49] Hicks , T. , Dutrow , E. ( 2001 ) “ Energy performance benchmarking for manufacturing plants . ”

ACEEE 2001 Summer Study on Energy - Effi ciency in Industry. www.aceee.org [accessed May 10, 2009].

[50] Boyd , G. ( 2005 ) Development of a Performance - based Industrial Energy Effi ciency Indicator for Automobile Assembly Plants , Chicago : Argonne National Laboratory, Decision and Information Sciences Division .

[51] Kissock , K. , Seyak J. ( 2004 ) “ Lean energy analysis: identifying, discovering and tracking energy savings potential , ” Proceedings of Society of Manufacturing Engineers: Advanced Energy and Fuel Cell Technologies Conference , Livonia, MI, Oct. 11 – 13

[52] Kissock , K. and Eger , C. ( 2006 ) “ Measuring Plant - wide Industrial Energy Savings ” , Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3 – 6 .

[53] IISI ( 1994 ) “ Competition between steel and aluminum for the passenger car , ” International Iron and Steel Institute IISI report (1994) Brussels. www.worldstainless.org [accessed June, 10 2009].

[54] Klobucar , J. ( 2004 ) “ Improving energy effi ciency of automotive paint shops ” , Painting Technology Workshop, Lexington, KY.

[55] Newell , S. ( 1998 ) “ Strategic evaluation of environmental metrics: making the use of life - cycle analysis ” , PhD Dissertation, MIT Department of Material Science and Engineering.

[56] Peters , T. ( 1997 ) “ Environmental awareness in car design ” , SAE publication SP - 1263, Feb. [57] Hohmeyer , O. , Ottinger , R.L. (eds.) ( 1992 ) Social Costs of Energy , New York : Springer Verlag . [58] Zuckerman , B. , Ackerman , F. ( 1995 ) “ The 1994 update of the Tellus Institute Packaging study

impact assessment method , ” Proc. STEAC Impact Assessment Working Group Conference , Washington DC.

[59] Rowe , R. ( 1995 ) The New York Externality Study , Empire State Electric Energy Research Corporation, New York : Oceana Publication .

[60] Steen , B. , Ryding , S. - O. ( 1992 ) The EPS enviro - accounting method . IVL Report, G ö teborg, Sweden.

[61] Ginley , D.M. ( 1994 ) “ Material fl ows in the transportation industry, an example of industrial metabolism ” , Resources Policy , 20 : 169 – 181 .

[62] Roth , R. , Diffenbach , J. , Issacs , J. ( 1998 ) “ economic analysis of the ultra - light steel auto. body , ” Proceedings of the SAE IBEC , Detroit. MI.

[63] Ashby , Michael, F. ( 2009 ) Materials and the Environment , Oxford : Elsevier Butterworth Heinemann .

[64] Muther , R. ( 1973 ) Systematic Layout Planning , 2nd edition , Boston : Cahners Books . [65] Knox , Agnew ( 1998 ) The Geography of the World Economy , 3rd edition , London : Arnold . [66] Shingo , Shigeo , Dillon , Andrew ( 1989 ) A Study of the Toyota Production System: From an

Industrial Engineering Viewpoint , Portland, OR : Productivity Press . [67] Shingo , Shigeo ( 1986 ) Zero Quality Control, Source Inspection and the Poke - Yoke System ,

Portland, OR : Productivity Press .