Embed Size (px)
Citation preview
References
Aboulafia, R., 2000, Airbus pulls closer to Boeing, Aerospace America, 38(4): 16-18. Ahmadi, R., Roemer, T.A., and Wang, R.H., 2001, Structuring product development processes, European
Journal of Operational Research, 130(3): 539-558. Akundi, S., Simpson, T.W., and Reed, P.M., 2005, Multi-objective design optimization for product
platform and product family design using genetic algorithms, ASME Design Engineering Technical Conferences - Design Automation Conference, Gea, H. C. (Ed.), Long Beach, CA, ASME, Paper No. DETC2005/DAC-84905.
Alford, D., Sackett, P., and Neider, G., 2000, Mass customization - An automotive perspective, International Journal of Production Economics, 65(1 ): 99-110.
Allada, V., and Jiang, L., 2002, New modules launch planning for evolving modular product families, ASME Design Engineering Technical Conferences - Design for Manufacturing Conference, Montreal, Quebec, Canada, ASME, Paper No. DETC2002/DFM-34190.
Allen, K. R., and Carlson-Skalak, S., 1998, Defining product architecture during conceptual design, ASME Design Engineering Technical Conferences- Design Theory and Methodology, Atlanta, GA, ASME, Paper No. DETC98/DTM-5650.
Almgren, H., 2000, Pilot production and manufacturing start-up: the case of Volvo S80, International Journal of Production Research, 38(17): 4577-4588.
Anderson, D.M., 1997, Agile Product Development for Mass Customization: How to Develop and Deliver Products for Mass Customization, Niche Markets, JIT, Build-to-Order and Flexible Manufacturing, Irwin, Chicago, IL.
Anderson, S.W., 1995, Measuring the impact of product mix heterogeneity on manufacturing overhead cost, The Accounting Review, 70(3): 363-387.
Anderson, S.W., and Sed a tole, K.L., 1998, Designing quality into products: the use of accounting data in new product development, Accounting Horizons, 12(3): 213-233.
Andrade, M.C., Pessanha Filho, R.C., Espozel, A.M., Maia, L.O.A., and Qassim, R.Y., 1999, Activitybased costing for production learning, International Journal of Production Economics, 62(3): 175-180.
Anonymous, 2002, Volkswagen campaigns for more distinct brand identities, Professional Engineering, 15(5): 13.
Anonymous, 2005, Aircraft families I Commonality: Maximum benefits from today's most modem aircraft, http://www.airbus.com/en/aircraftfamilies/commonality.html, Retrieved on July 16, 2005.
Asiedu, Y., and Gu, P., 1998, Product life cycle cost analysis: State of the art review, International Journal of Production Research, 36( 4 ): 883-908.
Atkinson, A.A., Kaplan, R.S., and Young, S.M., 2004, Management Accounting, Pearson Prentice Hall, Upper Saddle River, NJ.
Baker, K.R., 1985, Safety stocks and component commonality, Journal of Operations Management, 6(1 ): 13-22.
530 References
Baker, K.R., Magazine M..J., and Nuttle, H.L.W., 1986, The effect of commonality on safety stock in a simple inventory model, Management Science, 32(8): 982-988.
Balakrishnan, P.V.S., and Jacob, V.S., 1996, Genetic algorithms for product design, Management Science, 42(1 ): 1105-1117.
Baldwin, C.Y., and Clark, K.B., 1997, Managing in an age of modularity, Harvard Business Review, 75(5): 84-93.
Baldwin, C.Y., and Clark, K.B., 2000, Design rules: The Power of Modularity, MIT Press, Cambridge, MA.
Banker, R.D., Datar, S.M., Kekre, S., and Mukhopadhyay, T., 1990, Cost of product and process complexity, in Measures for Manufacturing Excellence, Kaplan, R.S. (Ed.), Harvard Business School Press, Boston, MA, pp. 269-290.
Banker, R.D., Potter, G., and Schroeder, R.G., 1995, An empirical analysis of manufacturing overhead cost drivers, Journal of Accounting and Economics, 19(1): 115-137.
Bass, L., Clements, P., and Kazman, R., 2003, Software Architecture in Practice, Addison-Wesley, Boston, MA.
Bcjan, A., 1996, Street network theory of organization in nature, Journal of Advanced Transportation, 255(7): 85-107.
Bejan, A., 1997, Advanced Engineering Thermodynamics, John Wiley & Sons, New York. Bejan, A., 2000, Shape and Structure: From Engineering to Nature, Cambridge University Press,
Cambridge, UK. Ben-Akiva, M., and Lerman, S., 1985, Discrete Choice Analysis: Theory and Application to Travel
Demand, The MIT Press, Cambridge, MA. Bhimani, A., and Muelder, P.S., 2001, Managing processes, quality, and costs: A case study, Journal of
Cost Management, 15(2): 28-32. Bielefeld, J.R.J., and Rucklos, G.D., 1992, Cost scaling factors: how accurate are they? Cost Engineering,
34(1 0): 15-20. Biersdorfer, J.D., 2001, Module lineup gives a little organizer big ambitions, The New York Times, New
York, NY: E7. Blackburn, J.H., 1985, Improve MRP and JIT compatibility by combining routings and bills of material,
Proceedings of the American Production and Inventory Control Society, pp. 444-447. Blackenfelt, M., 2000, Profit maximisation while considering uncertainty by balancing commonality and
variety using robust design - The redesign of a family of lift tables, ASME Design Engineering Technical Conferences - Design for Manufacturing, Baltimore, MD, ASME, Paper No. DETC2000/D FM -140 13.
Blackenfelt, M., and Sellgren, U., 2000, Design of robust interfaces in modular products, ASME Design Engineering Technical Conferences - Design Automation Conference, Baltimore, MD, ASME, Paper No. DETCOO/DAC-14486.
Blanchard, B.S., and Fabrycky, W..J., 1998, Systems Engineering and Analysis, Prentice-Hall, Upper Saddle River, NJ.
Blischke, W.R., and Murthy, D.N.P., 1994, Warranty Cost Analysis, Marcel Dekker, Inc., New York. Bode, J., 2000, Neural networks for cost estimation: Simulations and pilot application, International
Journal of Production Research, 38(6 ): 1231-1254. Boer, M., and Logendran, R., 1999, A methodology for quantifying the effects of product development
on cost and time, IJE Transactions, 31(4): 365-378. Boothroyd, G., Dewhurst, P., and Knight, W.A., 2002, Product Design for Manufacture and Assembly,
Marcel Dekker Inc., New York. Bremmer, R., 1999, Cutting-Edge Platforms, Financial Times Automotive World, September, pp. 30-38. Bremmer, R., 2000, Big, bigger, biggest, Automotive World, June, pp. 36-44. Brimson, J.A., 1998, Feature costing: beyond ABC, Journal of Cost Management, 12(1 ): 6-12. Bruns, W.J., 1989, Destin Brass Products Co., Harvard Business Review, Case No. 9-190-089: 1-10. Buede, D.M., 2000, The Engineering Design of Systems- Models and Methods, John Wiley & Sons, New
York. Caffrey, R.T., Simpson, T.W., Henderson, R., and Crawley, E., 2002, The technical issues with
implementing open avionics platforms for spacecraft, the 40th A!AA Aerospace Sciences Meeting and Exhibit, Reno, NV, AIAA, AIAA-2002-0319.
Carney, D., 2004, Platform flexibility, Automotive Engineering International, 112: 147-149. Cetin, O.L., and Saitou, K., 2004, Decomposition-based assembly synthesis for structural modularity,
ASME Journal of Mechanical Design, 126(2): 234-243.
References 531
Chakravarty, A.K., and Balakrishnan, N., 2001, Achieving product variety though optimal choice of module variations, II£ Transactions, 33(7): 587-598.
Chandler, C., and Williams, M., 1993, Strategic shift: A slump in car sales forces nissan to start cutting swollen costs, Wall Street Journal, New York, NY, A1.
Chang, T.-S., and Ward, A.C., 1995, Design-in-modularity with conceptual robustness, Advances in Design Automation, Azarm, S., et al., (Eds.), Boston, MA, ASME, 82(1): 493-500.
Chapman, S.J., 1991, Electric Machinery Fundamentals, McGraw-Hill, New York, NY. Chen, M., Han, J., and Yu, P., 1996, Data mining: An overview from database perspective, IEEE
Transactions on Knowledge and Data Engineering, 8(6): 866-883. Child, P., Diederichs, R., Sanders, F.-H., and Wisniewski, S., 1991, The management of complexity,
Sloan Management Review, 33(1): 73-80. Chinnaiah, P.S.S., Kamarthi, S.V., and Cullinane, T.P., 1998, Characterization and analysis of mass
customized production systems, International Journal of Agile Manufacturing, 2(1): 93-118. Choi, S.C., and DeSarbo, W.S., !994, A conjoint-based product designing procedure incorporating price
competition, Journal of Product Innovation Management, 11(5): 451-459. Cicirello, V.A., and Regli, W., 2002, An approach to a feature-based comparison of solid models of
machined parts, AIEDAM, 16(5): 385-399. Clancy, O.K., 1998, Strategic design cost analysis, Cost Engineering, 40(8): 25-30. Clark, J.P., Roth, R., and Field, F.R., 1997, Techno-economic issues in materials selection, in ASM
Handbook Volume 20: Materials Selection and Design, Dieter. G.E. (Ed.), ASM International, Materials Park, OH, pp. 255-265.
Clausing, D., 1994, Total Quality Development - a Step-by-step Guide to World-class Concurrent Engineering, ASME Press, New York, NY.
Dixon, J.R., 1987, On research methodology towards a scientific theory of engineering design, Artificial Intelligence in Engineering Design, Analysis, and Manufacturing, 1(3): 145-157.
Cogdell, J.R., 1990, Foundations of Electrical Engineering, Prentice Hall, Upper Saddle River, NJ. Cohen, L., 1995, Quality Function Deployment: How to Make QFD Work for You, Addison-Wesley,
Reading, MA. Cokins, G., 2000, The changing face of cost management in the auto industry, Journal of Cost
Management, 14(5): 13-15. Collier, D.A., 1979, Planned work center load in a material requirements planning system, the Eleventh
National AIDS Meeting, New Orleans, LA. Collier, D.A., 1980, Justifying component part standardization, Twelfth National AIDS Conference, Las
Vegas, NV. Collier, D.A., 1981, The measurement and operating benefits of component part commonality, Decision
Sciences, 12(1 ): 85-96. Collier, D.A., 1982, Aggregate safety stock levels and component part commonality, Management
Science, 28(11): 1297-1303. Conner, C. G., De Kroon, J.P., and Mistree, F., 1999, A product variety tradeoff evaluation method for a
family of cordless drill transmissions, ASME DETC, Las Vegas, Nevada, DETC99/DAC-8625. Constantine, B., Roth, R., and Clark, J.P., 2001, Substituting tube-hydroformed parts for automotive
stampings: An economic model, Journal of Operations Management, 53(8): 33-38. Cooper, R., and Kaplan, R.S., 1988, How cost accounting distorts product costs, Management
Accounting, April, pp. 20-27. Cooper, R., and Kaplan, R.S., 1992, Activity-based systems: measuring the costs of resource usage,
Accounting Horizons, 6(3): 1-12. Cooper, R., and Kaplan, R.S., 1998, The promise - and peril - on integrated cost systems, Harvard
Business Review, July-August, pp. 109-119. Cox, J.J., Roach, G. M., and Teare, S., 2001, Reconfigurable models and product templates as a means to
increasing productivity in the product development process, Proceedings of the 2001 World Congress on Mass Customization and Personalization, Hong Kong, China, October 1-2, A3C004.
Cusumano, M.A., and Nobeoka, K., 1998, Thinking Beyond Lean, The Free Press, New York, NY. Cusumano, M.A., and Selby, R.W., 1995, Microsoft secrets: How the World's Most Powerful Software
Company Creates Technology, Shapes Markets, and Manages People, The Free Press, New York, NY.
Dahmus, J.B., Gonzalez-Zugasti, J.P., and Otto, K.N., 2001, Modular product architecture, Design Studies, 22(5): 409-424.
Dahmus, J.B., and Otto, K.N., 2001, Incorporating !ifecycle costs into product architecture decisions, ASME Design Engineering Technical Conferences, Pittsburgh, PA, ASME, Paper No. DETC2001/DAC-21110.
532 References
Dai, Z., and Scott, M.J., 2004a, Effective product family design using preference aggregation, ASME Design Engineering Technical Conferences - Design Theory and Methodology Conference, Salt Lake City, UT, ASME, Paper No. DETC2004/DTM-57419.
Dai, Z., and Scott, M. J., 2004b, Product platform design through sensitivity analysis and cluster analysis, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W. (Ed.), Salt Lake City, UT, ASME, Paper No. DETC2004/DAC-57464.
Das, S.K., Yedlarajiah, P., and Narendra, R., 2000, An approach for estimating the end-of-life product disassembly effort and cost, International Journal of Production Research, 38(3): 657-673.
De Lit, P., and Delchambre, A., 2003, Integrated Design of A Product Family and Its Assembly System, Kulwer Academic Publishers, Norwell, MA.
De Lit, P., Delchambre, A., and Henrioud, J.M., 2003, An integrated approach for product family and assembly system design, IEEE Transactions on Robotics and Automation, 19(2): 324-333.
De Week, 0., Suh, E.S., and Chang, D., 2003, Product family and platform portfolio optimization, ASME Design Engineering Technical Conferences - Design Automation Conference, Shimada, K. (Ed.), Chicago, IL, ASME, Paper No. DETC2003/DAC-48721.
Delingette, H., Hebert, M., and Ikeuchi, K., 1992, Shape representation and image segmentation using deformable surfaces, Image Vision Computing, 10(3): 132-144.
Dertouzos, M.L., 1989, Made in America: Regaining the Productive Edge, MIT Press, Cambridge, MA. Dobson, G., and Kalish, S., 1988, Positioning and pricing a product line, Marketing Science, 7(2): 107-
125. Dobson, G., and Kalish, S., 1993, Heuristics for pricing and positioning a product-line using conjoint and
cost data, Management Science, 39(2): 160-175. Doran, D.T., and Dowd, J.E., 1999, Depreciation and amortization cost in activity based costing systems,
Journal of Cost Management, 13(5): 34-38. D'Souza, B., and Simpson, T.W., 2003, A genetic algorithm based method for product family design
optimization, Engineering Optimization, 35(1 ): 1-18. Du, X., Jiao, J., and Tseng, M.M., 2001, Architecture of product family: Fundamentals and methodology,
Concurrent Engineering: Research and Application, 9(4): 309-325. Duray, R., Ward, P.T., Milligan, G.W., and Berry, W.L., 2000, Approaches to mass customization:
configurations and empirical validation, Journal of Operations Management, 18(6): 605-625. Eisenhardt, K., 1989, Building theories from case study research, Academy of Management review, 14(4):
532-550. Elinson, A., Nau, D.S., and Regli, W.C., 1997, Feature-based similarity assessment of solid models,
Fourth Symposium on Solid Modeling and Applications, Hoffman, C., and Bronsvoort, W. (Eds.), Atlanta, GA, pp. 297-310.
Emblemsvag, J., and Bras, B., 1994, Activity-based costing in design for product retirement, ASME Design Engineering Technical Conferences - Design Theory and Methodology Conference -Advances in Design Automation Conference, Minneapolis, DE- 69(2): 351-362.
Eppinger, S.D., Whitney, D.E., Smith, R.P., and Gebala, D.A., 1994, A model-based method for organizing tasks in product development, Research in Engineering Design, 6(1 ): 1-13.
Erens, F., 1997, Synthesis of Variety: Developing Product Families, Ph.D. Dissertation, University of Technology, Eindhoven, The Netherlands.
Ericsson, A., and Erixon, G., 1999, Controlling Design Variants: Modular Product Platforms, ASME, New York.
Erixon, G., 1996, Design for modularity, Design for X - Concurrent Engineering Imperatives, Huang, G.Q. (Ed.), Chapman & Hall, New York, pp. 356-379.
Emi, K., and Lewerentz, C., 1996, Applying design metrics to object oriented frameworks, The 3rd International Software Metrics Symposium, Berlin, Germany, IEEE 96TB100034: 64-74.
Esawi, A.M.K., and Ashby, M.F., 2003, Cost estimates to guide pre-selection of processes, Materials & Design, 24(8): 605-616.
Eynan, A., and Rosenblatt, M.J., 1996, Component commonality effects on inventory costs, !IE Transactions, 28(2): 93-104.
Farrell, R., and Simpson, T.W., 2003, Product platform design to improve commonality in custom products, Journal of Intelligent Manufacturing, 14(6): 541-556.
Feitzinger, E., and Lee, H.L., 1997, Mass customization at Hewlett-Packard: The power of postponement, Harvard Business Review, 75(1): 116-121.
Fellini, R., Kokkolaras, M., Miche1ena, N., Papalambros, P., Saitou, K., Perez-Duarte, A., and Fenyes, P.A., 2002a, A sensitivity-based commonality strategy for family products of mild variation, with
References 533
application to automotive body structures, 9th AIAA/JSSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA, AIAA, AIAA-2002-5610.
Fellini, R., Kokkolaras, M., Papalambros, P., and Perez-Duarte, A., 2002b, Platform selection under performance loss constraints in optimal design of product families, ASME Design Engineering Technical Conferences - Design Automation Conference, Fadel, G. (Ed.), Montreal, Quebec, Canada, ASME, Paper No. DETC2002/DAC-34099.
Fellini, R., Papalambros, P., and Weber, T., 2000, Application of product platform design process to automotive powertrains, The 8th AIAA/NASNUSAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Long Beach, CA, AIAA, AIAA-2000-4849.
Fenyes, P.A., 2000, Multidiscplinary design and optimization of automotive structures - A parametric approach, Proceedings of the 8'" AIAA/NASNUSAF/ISSMO Symposium on Multidisciplinary Analysis and Optimization, AIAA-2000-4706.
Ferdinand, A., 1993, Systems. Software. and Quality Engineering, Van Nostrand Reinhold. Fernandez, M.G., Seepcrsad, C.C., Rosen, D.W., Allen, J.K., and Mistree, F., 2001, Utility-based
decision, support for selection in engineering design, The 13th International Conference on Design Theory and Methodology, Pittsburgh, PA, DETC2001/DAC-21106.
Fen·ari, E., Gamberi, M., Manzini, R., and Pareschi, A., 2003, An Integrated optimization process for the production planning and control of a flexible manufacturing system, Advanced Simulation Technologies Conference, Orlando, FL.
Fine, C.H., Vardan, R., Pethick, R., and El-Hout, J., 2002, Rapid response capability in value-chain design, Sloan Management Review, 43(2): 69-75.
Fisher, M.L., and Ittner, C. D., 1999, The impact of product variety on automobile assembly operations: empirical evidence and simulation analysis, Management Science, 45(6): 771-786.
Fisher, M.L., Ramdas, K., and Ulrich, K.T., 1999, Component sharing in the management of product variety: A study of automotive braking systems, Management Science, 45(3): 297-315.
Fixson, S.K., 2005, Product architecture assessment: A tool to link product, process, and supply chain design decisions, Journal of Operations Management, 23(3/4): 345-269.
Foster, G., and Gupta, M., 1990, Manufacturing overhead cost driver analysis, Journal of Accounting and Economics, 12(1-3): 309-337.
Fredriksson, P., and Araujo, L., 2003, The evaluation of supplier performance: A case study of Volvo cars and its module suppliers, Journal of Customer Behavior, 2(3): 365-384.
Fritzsch, R.B., 1997, Activity-based costing and the theory of constraints: using time horizons to resolve two altemative concepts of product cost, Journal of Applied Business Research, 14(1): 83-89.
Fujita, K., 2002, Product variety optimization under modular architecture, Computer-Aided Design, 34(12): 953-965.
Fujita, K., Akagi, S., and Hirokawa, N., 1993, Hybrid approach for optimal nesting using a genetic algorithm and a local minimization algorithm, Proceedings of the 1993 ASME Design Automation Conference, DE-65(1), pp. 477-484.
Fujita, K., Akagi, S., Yoneda, T., and Ishikawa, M., 1998, Simultaneous optimization of product family sharing system structure and configuration, ASME Design Engineering Technical Conferences -Design for Manufacturing, Atlanta, GA, ASME, Paper No. DETC98/DFM-5722.
Fujita, K., Akagi, S., Yoshida, K., and Hirokawa, N., 1996, Genetic algorithm based optimal planning method of energy plant configurations, Proceedings of the 1996 ASME Design Engineering Technical Conferences, Paper No. 96-DETC/DAC-1464.
Fujita, K., and Ishii, K., 1997, Task structuring toward computational approaches to product variety design, Proceedings of the 1997 ASME Design Engineering Technical Conferences, Paper No. 97DETC/DAC-3766.
Fujita, K., Sakaguchi, H., and Akagi, S., 1999, Product variety deployment and its optimization under modular architecture and module commonalization, ASME Design Engineering Technical Conferences- Design for Manufacturing, Las Vegas, NV, ASME, Paper No. DETC99/DFM-8923.
Fujita, K., Takagi, H., and Nakayama, T., 2003, Assessment method of value distribution for product family deployment, Proceedings of 14th Intemational Conference on Engineering Design (ICED 03), Paper No. 1484.
Fujita, K., and Yoshida, H., 2001, Product variety optimization: simultaneous optimization of module combination and module attributes, ASME Design Engineering Technical Conferences - Design Automation Conference, Diaz, A. (Ed.), Pittsburgh, PA, ASME, Paper No. DETC2001/DAC-2l058.
Fujita, K., and Yoshida, H., 2004, Product variety optimization simultaneously designing module combination and module attributes, Concurrent Engineering: Research and Applications, 12(2): 105-118.
534 References
Fujita, K., and Yoshioka, S., 2003, Optimal design methodology of common components for a class of products: its foundations and promise, ASME Design Engineering Technical Conferences -Design Automation Conference, Shimada, K. (Ed.), Chicago, IL, ASME, Paper No. DETC2003/DAC-48718.
G.S. Electric, I 997, Why Universal Motors Tum on the Appliance Industry, http://www. gselectric .com/electric/univers4. htm.
Galsworth, G.D., I 994, Smart, Simple Design: Using Variety Effectiveness to Reduce Total Cost and Maximize Customer Selection, Omneo, Essex Junction, VT.
Gerchak, Y., Magazine, M.J., and Gamble, A.B., 1988, Component commonality with service level requirements, Management Science, 34(6): 753-760.
Gcrshenson, J.K., Prasad, G.J., and Allamneni, S., 1999, Modular product design: A life-cycle view, Journal of Integrated Design and Process Science, 3(4): 13-26.
Gershenson, J.K., Prasad, G.J. and Zhang, Y., 2003a, Product Modularity: Definition and Benefits, Journal of Engineering Design, 14(3): 295-313.
Gershenson, J.K., Prasad, G.J. and Zhang, Y., 2003b, Product Modularity: Measures and Design Methods, Journal of Engineering Design, 15(1 ): 33-51.
Goldberg, D. E., 1989, Genetic Algorithms in Search, Optimization, and Machine Learning, AddisonWesley Publishing Company, Inc., New York.
Goldratt, E.M., and Cox, J., 1984, The Goal- A Process of ongoing Improvement, North River Press, Great BaiTington, MA.
Gonzalez-Zugasti, J.P., and Otto, K.N., 2000, Modular Platform-Based Product Family Design, ASME Design Engineering Technical Conferences - Design Automation Conference, Renaud, J.E. (Ed.), Baltimore, MD, ASME, Paper No. DETC-2000/DAC-14238.
Gonzalez-Zugasti, J.P., Otto, K.N., and Baker, J.D., 2000, A method for architecting product platforms, Research in Engineering Design, 12(2): 61-72.
Gonzalcz-Zugasti, J.P., Otto, K.N., and Baker, J.D., 2001, Assessing value for platformed product family design, Research in Engineering Design, 13(1 ): 30-41.
Gordon, P., 2004, Tapping the full potential of product platforms, Platform Management for Continued Growth Conference, Atlanta, GA, PDMA.
Graedel, T., Allenby, H., and Comrie, P., 1995, Matrix approaches to abridged life cycle assessment, Environmental Science and Technology, 29(3): 134A-139A.
Green, P.E., and Krieger, A.M., 1985, Models and heuristics for product line selection, Marketing Science, 4(1): 1-19.
Green, P.E., and Krieger, A.M., 1989, Recent contributions to optimal product positioning and buyer segmentation, European Journal of Operational Research, 41 (2): 127-141.
Green, P.E., and Krieger, A.M., 1996, Individualized hybrid models for conjoint analysis, Management Science, 42(6): 850-867.
Grob, B., 1975, Basic Television- Principles and Servicing, 4'" Edition, McGraw-Hill, New York, NY. GTI, 2001, GT-Power User's Manual and Tutorial, GT-Suite Version 5.2. Gamma Technologies. Gulati, R.K., and Eppinger, S.D., 1996, the coupling of product architecture and organizational structure
decisions, Working Paper, Cambridge, MA, MIT Sloan School of Management, pp. 31. Guo, F., and Gershenson, J.K., 2003, Comparison of modular measurement methods based on
consistency analysis and sensitivity analysis, ASME Design Engineering Technical Conferences -Design Theory & Methodology, Schmidt, L. (Ed.), Chicago, IL, ASME, Paper No. DETC2003/DTM-48634.
Guo, F., and Gershenson, J.K., 2004, A comparison of modular product design methods based on improvement and iteration, ASME Design Engineering Technical Conferences - Design Theory & Methodology, Salt Lake City, UT, ASME, Paper No. DETC2004/DTM-57396.
Gupta, A.K., and Souder, W.E., 1998, Key drivers of reduced cycle time, Research Technology Management, 41(4): 38-43.
Gupta, S., and Krishnan, V., 1998a, Integrated component and supplier selection for a product family, Production and Operations Management, 8(2): 163-182.
Gupta, S., and Krishnan, V., 1998b, Product family-based assembly sequence design methodology, liE Transactions, 30(10): 933-945.
Halman, J.I.M., Hofer, A.P., and van Vuuren, W., 2003, Platform driven development of product families: Theory versus practice, Journal of Product Innovation Management, 20(2): 149-162.
Hassan, R., de Week, 0., and Springmann, P., 2004, Architecting a communication satellite product line, The 22nd AIAA International Communications Satellite Systems Conference & Exhibit 2004 (ICSSC), Monterey, CA, AIAA, AIAA-2004-3150.
References 535
Hastings, N.A.J., and Yeh, C.H., 1992, Bill of manufacture, Journal of Production and Inventory Management, 33(4): 27-31.
Hauser, J.R., 2001, Metrics thermostat, Journal of Product Innovation Management, 18(3): 134-153. Hazelrigg, G.A., 1998, A framework for decision-based engineering design, ASME Journal of
Mechanical Design, 120(4): 653-658. He, D.W., and Kusiak, A., 1997, Design of assembly systems for modular products, IEEE Transactions
and Automation, 13(5): 646-655. Hegge, H.M.H., 1992, A generic bill-of-material processor using indirect identification of products,
Production Planning & Control, 3(3): 336-342. Henderson, R.M., and Clark, K.B., 1990, Architectural innovation: the reconfiguration of existing product
technologies and the failure of established firms, Administrative Science Quarterly, 35(1 ): 9-30. Hernandez, G., Allen, J.K., and Mistree, F., 2002, Design of hierarchic platforms for customizable
products, ASME Design Engineering Technical Conferences - Design Automation Conference, Fadel, G. (Ed.), Montreal, Quebec, Canada, ASME, Paper No. DETC2002/DAC-34095.
Hernandez, G., Allen, J.K., and Mistree, F., 2003, Platform design for customizable products as a problem of access in a geometric space, Engineering Optimization, 35(3): 229-254.
Hernandez, G., Simpson, T.W., Allen, J.K., Bascaran, E., Avila, L.F., and Salinas, F., 2001, Robust design of families of products with production modeling and evaluation, ASME Journal of Mechanical Design, 123(2): 183-190.
Heywood, J.B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill, New York, NY. Hicks, D.T., 1999, Activity Based Costing: Making It Work for Small and Mid-Sized Companies, John
Wiley & Sons. Ho, T.I-1., and Tang, C.S., 1998, Product Variety Management: Research Advances, Kluwer Academic
Publishers, Boston, MA. Hofer, A.P., 2001, Management von Produktfamilien: Wettbewerbsvorteile durch Plattformen, DUV
Gabler, Wiesbaden. Holttii, K., and Otto, K., 2005, Incorporating design complexity measures in architectural assessment,
Design Studies, in press. Hopp, W.J., and Spearman, M.L., 200!, Factory Physics, McGraw-Hill, Boston, MA. Hom, B., 1984, Extended Gaussian images, Proceeding of the IEEE, 72(12): 1671-1686. Horngren, C.T., and Foster, G., 1991, Cost Accounting: A Managerial Emphasis, Prentice Hall,
Englewood Cliffs, NJ. Homgren, C.T., Foster, G., and Datar, S.M., 2000, Cost Accounting: A Managerial Emphasis, Prentice
Hall, Upper Saddle River, NJ. Hu, W., and Poli, C., 1997, To injection mold, to stamp, or to assemble?- Part II: A time-to-market
perspective, ASME Design Engineering Technical Conferences, Sacramento, CA, ASME, Paper No. DETC97/DTM-3896.
!luang, C.-C., and Kusiak, A., 1998, Modularity in design of products and systems, IEEE Transactions on Systems, Man and Cybernetics-Part A: Systems and Humans, 28(1): 66-77.
Huffman, C., and Kahn, B.E., 1998, Variety for sale: mass customization or mass confusion, Journal of Retailing, 74(4): 491-513.
Hundal, M.S., I 997, Product costing: A comparison of conventional and activity-based costing methods, Journal of Engineering Design, 8(1 ): 91-103.
Hundal, M.S., 1997, Systematic Mechanical Designing: A Cost and Management Perspective, ASME Press, New York, NY.
Ishii, K., Juengel, C., and Eubanks, C.F., 1995a, Design for product variety: Key to product line structuring, ASME Design Engineering Technical Conferences - Design Theory and Methodology, Boston, MA, ASME: 83(2): 499-506.
Ishii, K., Lee, B. H., and Eubanks, C.F., 1995b, Design for product retirement and modularity based on technology life-cycle, ASME Manufacturing Science and Engineering, Kannatey-Asibu, E. (Ed.), San Francisco, CA, ASME, MED 2-2/MH-3-2: 921-933.
Ittner, C.D., and MacDuffie, J.P., 1994, Exploring the Sources of International Differences in Manufacturing Overhead, The Wharton School, University of Philadelphia, Philadelphia, PA.
Jensen, K., 1992, Colored Petri Nets: Basic Concepts, Analysis Methods and Practical Use, 1, SpringerVerlag Berlin Heidelberg, Germany.
Jiang, L., and Allada, V., 2001, Design for robustness of modular product families for current and future markets, ASME Design Engineering Technical Conferences - Design for Manufacturing Conference, Pittsburgh, P A, ASME, Paper No. DETC200 1/DFM-21177.
536 References
Jiang, Z., Zuo, M.J., Tu, P.Y., and Fung, R.Y.K., 1999, Object-oriented Petri Nets with changeable structure (OPNs-CS) for production system modeling, International Journal of Advanced Manufacturing Technology, 15(6): 445-458.
Jiao, J., and Tseng, M.M., 1999, A pragmatic approach to product costing based on standard time estimation, International Journal of Operations & Production Management, 19(7): 738-755.
Jiao, J., and Tseng, M.M., 2000, Understanding product family for mass customization by developing commonality indices, Journal of Engineering Design, 11(3): 225-243.
Jiao, J., and Tseng, M.M., 2004, Customizability analysis in design for mass customization, ComputerAided Design, 36(8): 745-757.
Jiao, J., Tseng, M.M., Ma, Q., and Zou, Y., 2000, Generic bill of materials and operations for high-variety production management, Concurrent Engineering: Research and Application, 8(4): 297-322.
Jiao, J., Zhang, L., and Pokharel, S., 2003, Process platform planning for mass customization, 2nd Interdisciplinary World Congress on Mass Customization and Personalization, CD-ROM Proceedings, Munich, Germany.
Jiao, J., Zhang, L., and Prasanna, K., 2005, Process variety modeling for process configuration in mass customization: An approach based on object-oriented Petri-Nets with changeable structures, International Journal of Flexible Manufacturing Systems, in press.
Johnson, A.E., and Hebert, M., 1999, Using spin-images for efficient multiple model recognition in cluttered, 3-D scenes, IEEE PAM!, 21(5): 433-449.
Kahn, B.E., 1998, Dynamic relationships with customers: High-variety strategies, Journal of the Academy of Marketing Science, 26(1 ): 45-53.
Kaiser, M., 2004, Platform Design for Multi-faceted Application Products using a Customer Driven Product Definition Process, CNH Global.
Kaplan, R.S., 1991, New systems for measurement and control, The Engineering Economist, 36(3): 201-218.
Kaplan, R.S., and Cooper, R., 1998, Cost and Effect: Using Integrated Cost Systems to Drive Profitability and Poformance, Harvard Business School Press, Boston, MA.
Kassmjian, I-I. H., 1977, Content analysis, Journal of Consumer Research, 4(1): 8-18. Kaul, A., and Rao, V.R., 1995, Research for product positioning and design decisions: An integrative
review, International Journal of Research in Marketing, 12(4): 293-320. Kee, R., 1998, Integrating ABC and the theory of constraints to evaluate outsourcing decisions, Journal
ofCost Management, 12(1): 24-36. Kennicott, P.R., 1996, Initial Graphics Exchange Specification - ANS US PRO/JP0-100-1996, US
Product Data Association, N. Charlston, NC. Kiley, D., 2005, Can VW find its beetle juice? Business Week Online, January 31,
http://www.businessweek.com/magazine/content/05 05/b3918132.htm. Kim, H.M., 2001, Target Cascading in Optimal System Design, Ph.D. Dissertation, University of
Michigan, Ann Arbor, MI. Kim, H.M., Kokkolaras, M., Louca, L.S., Delagrammatikas, G.J., Michelena, N.F., Filipi, Z.S.,
Papalambros, P.Y., Stein, J.L., and Assanis, D.N., 2002, Target cascading in vehicle redesign: A class VI truck study, International Journal of Vehicle Design, 29(3): 199-225.
Kimberly, W., 1999, Back to the future, Automotive Engineer, 24(5): 62-64. Kimura, F., Kato, S., Hata, T., and Masuda, T., 2001, Product modularization for parts reuse in inverse
manufacturing, CJRP Annals, 50(1): 89-92. Kirchain, R.E., 2001, Cost modeling of materials and manufacturing processes, Encyclopedia of
Materials: Science and Technology, pp. 1718-1727. Kirkpatrick, S., Gelatt Jr., C.D., and Vecchi, M.P., 1983, Optimization by simulated annealing, Science,
220(4598): 671-680. Knight, W.A., 1998, Group technology, concu!Tent engineering and design for manufacture and
assembly, Group Technology and Cellular Manufacturing: A State-of-the-Art Synthesis of Research and Practice, Suresh, N.C., Kay. J.M. (Eds.), Kluwer Academic Publishers, Boston, pp. 15-36.
Kobe, G., 1997, Platforms- GM's seven platform global strategy, Automotive Industries, 177: 50. Kogut, B., and Kulatilaka, N., 1994, Options thinking and platform investments: investing in opportunity,
California Management Review, 36(2): 52-71. Kohli, R., and Krishnamurti, R., 1987, A heuristic approach to product design, Management Science,
33(12): 1523-1533. Kohli, R., and Sukumar, R., 1990, Heuristics for product-line design using conjoint analysis,
Management Science, 36(12): 1464-1478.
References 537
Kokkolaras, M., Fellini, R., Kim, H.M., Michelena, N.F., and Papalambros, P.Y., 2002, Extension of the target cascading formulation to the design of product families, Structural and Multidisciplinary Optimization, 24(4): 293-301.
Kokkolaras, M., Louca, L.S., Delagrammatikas, G.J., Michelena, N.F., Filipi, Z.S., Papalambros, P.Y., Stein, J.L., and Assanis, D.N., 2004, Simulation-based optimal design of heavy trucks by modelbased decomposition: An extensive analytical target cascading case study, International Journal of Heavy Vehicle i'>ystems, 11(3-4): 402-432.
Koltai, T., Lonzano, S., GueJTero, and F., Onieva, L., 2000, A flexible costing system for flexible manufacturing systems using activity based costing, International Journal of Production Research, 38(7): 1615-1630.
Kola, S., and Sethuraman, K., 1998, Managing variety in product families through design for commonality, Proceeding of the 1998 ASME DETC, Atlanta, GA, DETC/DTM-5651.
Kota, S., Sethuraman, K., and Miller, R., 2000, A metric for evaluating design commonality in product families, Journal of Mechanical Design, 122(4): 403-410.
Krishnan, V., and Gupta, S., 2001, Appropriateness and impact of platform-based product development, Management Science, 47(1): 52-68.
Krishnan, V., and Ulrich, K., 2001, Product development decisions: A review of the literature, Management Science, 47(1): 1-21.
Kuhfeld, W.F., 2004, Conjoint analysis, SAS Technical Support Resources, TS-689G, http:/ /support.sas .com/tee hsup/technote/ts68 9g.pdf.
Kumar, R., Allada, V., and Ramakrishnan, S., 2004, Ant colongy optimization methods for product platform formation, ASME Design Engineering Technical Conferences - Design Automation Conference, Chen, W. (Ed.), Salt Lake City, UT, ASME, Paper No. DETC2004/DAC-57195.
Labro, E., 2004, The cost effects of component commonality: A literature review through a managementaccounting lens, Manufacturing & Service Operations Management, 6(4): 358-367.
Lancaster, K., 1990, The economics of product variety, Marketing Science, 9(3): 189-206. Landers, R.G., Min, B.-K., and Koren, Y., 2001, Reconfigurable machine tools, CIRP Annals, 48(2): 471-
495. Layer, A., Ten Brinke, E., van Houten, F., Kals, H.J.J., and Haasis, S., 2002, Recent and future trends in
cost estimation, International Journal of Computer Integrated Manufacturing, 15(6): 499-510. Lee, H.L., and Tang, C.S., 1998, Variability reduction through operations reversal, Management Science,
44(2): 162-172. Lehnerd, A.P., 1987, Revitalizing the manufacture and design of mature global products, in Technology
and Global Industry: Companies and Nations in the World Economy, Guile, B.R., Brooks, H. (Eds.), National Academy Press, Washington, D.C., pp. 49-64.
Leibl, P., !-lunda!, M.S., and Hoehne, G., 1999, Cost calculation with a feature-based CAD system using modules for calculation, comparison and forecast, Journal of Engineering Design, 10(1): 93-102.
Levy, D.L., 1994, Chaos theory and strategy: Theory, application, and managerial implications, Strategic Management Journal, 1S(Summer): 167-178.
Li, H., and Azarm, S., 2002, An approach for product line design selection under uncertainty and competition, ASME Journal of Mechanical Design, 124(3): 385-392.
Liebers, A., and Kals, H.J.J., 1997, Cost decision support in product design, CIRP Annals, 46(1): 107-112.
Lin, C.T., and Lee, C.S.G., 1996, Neural Fuzzy Systems: A Neuro-Fuzzy Synergism to Intelligent Systems, Prentice Hall, NJ.
Lingnau, V., 1999, Management accounting and product variety, in Optimal Bundling, Fuerderer, R., Hen·mann, A., Wuebker, G. (Eds.), Springer, Berlin, pp. 133-155.
Locascio, A., 1999, Design economics for electronics assembly, The Engineering Economist, 44(1 ): 64-77.
Locascio, A., 2000, Manufacturing cost modeling for product design, International Journal of Flexible Manufacturing Systems, 12(2-3): 207-217.
Lutz, R.A., 1998, Guts: The Seven Laws of Business that Made Chrysler the World's Hottest Car Company, John Wiley, New York.
MacCormack, A., Rusnak, J., and Baldwin, C.Y., 2004, Exploring the structure of complex software designs: An empirical study of open source and proprietary code, Harvard Business School Working Paper, Boston, MA.
MacDuffie, J.P., Sethuraman, K., and Fisher, M.L., 1996, Product Variety and manufacturing performance: evidence from the international automotive assembly plant study, Management Science, 42(3): 350-369.
538 References
Malakooti, B., Malakooti, N.R., and Yang, Z., 2004, Integrated group technology, cell formation, process planning, and production planning with application to the emergency room, International Journal of Production Research, 42(9): 1769-1786.
Martin, M.V., and Ishii, K., 1996, Design for variety: A methodology for understanding the costs of product proliferation, ASME Design Engineering Technical Conferences and Computers in Engineering Conference, Irvine, California, August 18-22, 1999, ASME, Paper No. 96DETC/DTM-1610.
Martin, M.V., and Ishii, K., 1997, Design for variety: Development of complexity indices and design charts, ASME Design Engineering Technical Conferences - Design for Manufacturability. Sacramento, CA.
Martin, M.V., and Ishii, K., 2002, Design for variety: Developing standardized and modularized product platform architectures, Research in Engineering Design, 13(4): 213-235.
Martinez, M.T., Favre!, J., and Ghodous, P., 2000, Product family manufacturing plan generation and classification, Concurrent Engineering: Research and Applications, 8(1): 12-22.
Masters, M., 2002, Direct manufacturing of custom-made hearing instruments, SME Rapid Prototyping Conference and Exhibition, Cincinnati, OH.
Mather, H., 1987, Bills of Materials, Dow Jones-Irwin, Homewood, IL. Mather, H., 1995, Product variety -- Friend or foe?, Proceedings of the 38th American Production &
Inventory Control Society International Conference and Exhibition, Orlando, FL, APICS, pp. 378-381.
Mattson, C. A., and Magleby, S.P., 200 I, The influence of product modularity during concept selection of consumer products, ASME Design Engineering Technical Conferences - Design Theory and Methodology Conference, Pittsburgh, P A, ASME, Paper No. DETC200 1/DTM-21712.
Maupin, A.J., and Stauffer, L.A., 2000, A design tool to help small manufacturers reengineer a product family, ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Baltimore, MD, Paper No. DETC2000/DTM-14568
McAdams, D.A., Stone, R.B., and Wood, K.L., 1999, Functional independence and product similarity based on customer needs, Research in Engineering Design, 11 (I): 1-19.
McAdams, D.A., and Wood, K.L.,2002, A quantitative similarity metric for design-by-analogy, ASME Journal of Mechanical Design, 124(2): 173-182.
McAuley, J., 1972, Machine grouping for efficient production, Production Engineer, February, pp. 53-57. McBride, R.D., and Zufryden, F.S., 1988, An integer programming approach to the optimal product line
selection problem, Marketing Science, 7(2): 126-140. McDermott, C.M., and Stock, G.N., 1994, The use of common parts and designs in high-tech industries:
A strategic approach, Production and Inventory Management Journal, 35(3): 65-68. McFarlane, D.C., and Bussmann, S., 2000, Developments in holonic production planning and control,
Production Planning and Control, 11(6): 522-536. McGrath, M.E., 1995, Product Strategy for High-Technology Companies, Irwin Professional Publishing,
New York, NY. McWherter, D., Peabody, M., Regli, W., and Shokoufandeh, A., 2001, Transformation invariant shape
similarity comparison of solid models, Proceeding of the ASME DETC 2001, Pittsburgh, PA. McWherter, D., Peabody, M., Regli, W., and Shokoufandeh, A., 2002, Database techniques for indexing
and clustering of solid models, The Sixth ACM/SIGGRAPH Symposium on Solid Modeling and Applications, Dutta, D., Seidel, H. (Eds.), Ann Arbor, Ml, pp. 78-87.
Mehrabi, M.G., Ulsoy, A.G., and Koren, Y., 2000, Reconfigurable manufacturing systems: key to future manufacturing, Journal of Intelligent Manufacturing, 11 ( 4 ): 403-419.
Mehrabi, M.G., Ulsoy, A.G., Koren, Y., and Heytler, P., 2002, Trends and perspectives in flexible and reconfigurable manufacturing systems, Journal of Intelligent Manufacturing, t 3(2): 135-146.
Messac, A., 1996, Physical programming: Effective optimization for computational design, AIAA Journal, 34(1): 149-158.
Messac, A., Martinez, M.P., and Simpson, T.W., 2002a, Effective product family design using physical programming, Engineering Optimization, 34(3): 245-261.
Mcssac, A., Martinez, M.P., and Simpson, T.W., 2002b, A penalty function for product family design using physical programming, ASME Journal of Mechanical Design, 124(2): 164-172.
Meyer, M.H., 1997, Revitalize your product lines through continuous platform renewal, Research Technology Management, 40(2): 17-28.
Meyer, M.H., and Lehnerd, A.P., 1997, The Power of Product Platforms: Building Value and Cost Leadership, Free Press, New York, NY.
References 539
Meyer, M.l-1., Tertzakian, P., and Utterback, J.M., 1997, Metrics for managing research and development in the context of the product family, Management Science, 43(1): 88-111.
Meyer, M.H., and Utterback, J.M., 1993, The product family and the dynamics of core capability, Sloan Management Review, 34(3): 29-47.
Michaels, J.V., and Woods, W.P., 1989, Design to Cost, John Wiley & Sons, New York, NY. Michelcna, N.F., Park, H., and Papalambros, P.Y., 2003, Convergence properties of analytical target
cascading, AIAA Journal, 41(5): 897-905. Miller, J.G., and Vollmann, T.E., 1985, The hidden factory, Harvard Business Review, 63(5): 142-150. Miller, S., 1999, VW sows confusion with common pattern for models - investors worry profits may
suffer as lines compete, Wall Street Journal, New York, A.25. Miller, S., 2002, Volkswagen to overhaul audi brand--- Effort is first step by European car maker to shed
conservative image, Wall Street Journal, New York, D.8. Monroe, K., Sunder, S., Wells, W.A., and Zoltners, A.A., 1976, A multi-period integer programming
approach to the product mix problem, Proceedings of the American Marketing Association Meeting, Bernhardt, K. (Ed.), pp. 493-497.
Moore, W.L., Louviere, J..J., and Verma, R., 1999, Using conjoint analysis to help design product platforms, Journal of Product Innovation Management, 16(1): 27-39.
Muffatto, M., 1999, Introducing a platform strategy in product development, International Journal of Production Economics, 60-61: 145-153.
Nair, S.K., Thakur, L.S., and Wen, K., 1995, Near optimal solutions for product line design and selection: beam search heuristics, Management Science, 41(5): 767-785.
Naughton, K., Thornton, E., Kerwin, K., and Dawley, H., 1997, Can Honda build a world car?, Business Week, September, 8: 100-107.
Nayak, R.U., Chen, W., and Simpson, T.W., 2002, A variation-based method for product family design, Engineering Optimization, 34( 1 ): 65-81.
Nelson, S.A., II, Parkinson, M.B., and Papalambros, P.Y., 2001, Multicriteria optimization in product platform design, ASME Journal of Mechanical Design, 123(2): 199-204.
Nobeoka, K., and Cusumano, M.A., 1995, Multiproject strategy, design transfer, and project performance: A survey of automobile development projects in the US and Japan, IEEE Transactions on Engineering Management, 42(4): 397-409.
O'Banion, J., 2004, The C-130 product family, Platform Management for Continued Growth Conference, Atlanta, GA, PDMA.
O'Grady, 1'., 1999, The Age of Modularity, Adams and Steele Publishers, Iowa City, lA. Oostcrwal, D., 2004, Driving company growth and profitability through product platforms, Platform
Management for Continued Growth Conference, Atlanta, GA, PDMA. Ortega, R., Kalyan-Seshu, U., and Bras, B., 1999, A decision support model for the life-cycle design of a
family of oil filters, ASME Design Engineering Technical Conferences - Design Automation Conference, Las Vegas, NV, ASME, Paper No. DETC99/DAC-8612.
Ostwald, P.F., and McLaren, T.S., 2004, Cost Analysis and Estimating for Engineering and Management, Pearson Prentice Hall, Upper Saddle River, NJ.
Otis, C. E., and Vosbury, P.A., 2001, Aircraft Gas Turbine Powerplants, Jeppesen Sanderson, Inc., Englewood, CO.
Otto, K., and Wood, K., 2001, Product Design: Techniques in Reverse Engineering and New Product Development, Prentice Hall, Inc., Upper Saddle River, NJ.
Pahl, G., and Beitz, W., 1996, Engineering Design- A Systematic Approach (Second edition), (Translated by Wallace, K., and Pomerans, A.), Springer, London.
Papalambros, P.Y., and Wilde, D.J., 2000, The Principles of Optimal Design - Modeling and Computation, Cambridge University Press, Cambridge, UK.
Paraskevopoulos, D., Karakitsos, E., and Rustem, B., 1991, Robust capacity planning under uncertainty, Management Science, 37(7): 787-800.
Park, J., 2005, Methods for Incorporating Cost Information into Platform-Based Product Development, Ph.D. Dissertation, Department of Industrial & Manufacturing Engineering, Penn State University, University Park, PA.
Park, J., and Simpson, T.W., 2003, Production cost modeling to support product family design, ASME 2003 Design Engineering Technical Conferences, Chicago, IL, ASME, Paper No. DETC2003/DAC-48720.
Park, J., and Simpson, T.W., 2004, Development of a production cost estimation framework to support product family design, International Journal of Production Research, 43(4): 731-772.
Parkinson, A.R., and Balling, R.J., 2002, The OptdesX design optimization software, Structural and Multidiscipi!nary Optimization, 23(2): 127-139.
540 References
Perera, H.S.C., Nagarur, N., and Tabucanon, M.T., 1999, Component part standardization: A way to reduce the life-cycle costs of products, International Journal of Production Economics, 60-61: I 09-116.
Pessina, M.W., and Renner, J.R., 1998, Mass customization at Lutron Electronics - a total company process, Agility & Global Competition, 2(2): 50-57.
Pimmler, T.U., and Eppinger, S.D., 1994, Integration analysis of product decompositions, Proceedings of the ASME Design Engineering Technical Conferences- Design Theory and Methodology, Hight, T. K. and Mistree, F. (Eds.), Minneapolis, MN, ASME, 68, pp. 343-351
Pine, B.J., 1993a, Mass Customization: The New Frontier in Business Competition, Harvard Business School Press, Boston, MA.
Pine, J.B., 1993b, Standard modules allow mass customization at Bally Engineering Structures, Planning Review, 21(4): 20-22.
Pull mana, M.E., Mooreb, W.L., and Wardellb, D.G., 2002, A comparison of quality function deployment and conjoint analysis in new product design, Journal of Product Innovation Management, 19(5): 354-364.
Quiroga, T., 2005, 2 !'" Century Muscle Cars, Car and Driver, January 2005, http://www.caranddriver.com/article.asp?section id=15&article id=8908.
Rai, R., and Allada, V., 2003, Modular product family design: Agent-based pareto-optimization and quality loss function-based post-optimal analysis, International Journal of Production Research, 41(17): 4075-4098.
Raiffa, H., and Keeney, R., 1993, Decisions with Multiple Objectives: Preferences and Value Tradeoffs, Wiley, New York, NY.
Rajan, P., VanWie, M., Campbell, M., Otto, K., and Wood, K., 2003, Design for flexibility- Measures and guidelines, Design Studies, to appear.
Ramdas, K., and Sawhney, M.S., 2001, A cross-functional approach to evaluating multiple line extensions for assembled products, Management Science, 47(1): 22-36.
Raymer, D.P., 1989, Aircraft Design: A Conceptual Approach, AIAA, Washington, D.C. Rehman, S., and Guenov, M.D., 1998, A methodology for modeling manufacturing costs at conceptual
design, Computers & Industrial Engineering, 35(3-4): 623-626. Reinertsen, D.G., 1997, Managing the Design Factory, The Free Press, New York, NY. Renders, J.M., and Plasse, S.P., 1996, Hybrid methods using genetic algorithms for global optimization,
IEEE Transactions on Systems, Man and Cybernetics- Part B: Cybernetics, 26(2): 243-258. Roach, G.M., Cox, J.J., and Sorensen C. D., 2005, The product design generator: A system for producing
design variants, International Journal of Mass Customization, 1(1 ): 83-106. Roach, G.M., Cox, J.J., and Young, J.M., 2003, A new strategy for automating the generation of product
family members and artifacts applied to an aerospace application, Proceedings of the 2003 Design Engineering Technical Conferences, Chicago, IL, DETC2003/CIE-48185.
Robertson, D., and Ulrich, K., 1998, Planning for product platforms, Sloan Management Review, 39(4): 19-31
Robinson, T.J., Borror, C.M., and Myers, R.H., 2004, Robust parameter design: A review, Quality and Reliability Engineering International, 20: 81-10 I.
Robinson, W.T., 1988, Marketing mix reactions to entry, Marketing Science, 7(4): 368-385. Roemer, T.A., Ahmadi, R., and Wang, R.H., 2000, Time-cost trade-offs in overlapped product
development, Operations Research, 48(6): 858-865. Rolstadas, A., 1991, Editorial: group technology and design of production systems, Production Planning
and Control, 2(4): 297. Romanowski, C.J., and Nagi, R., 2005, On comparing bills of materials: A similarity/distance measure
for unordered trees, IEEE Transactions on Systems, Man, and Cybernetics, Part A, in press. Rothwell, R., and Gardiner, P., 1990, Robustness and product design families, in Design Management: A
Handbook of Issues and Methods, Oakley, M. (Ed.), Basil Blackwell Inc., Cambridge, MA, pp. 279-292.
Saaty, T., 1980, The Analytic Hierarchy Process, McGraw-Hill, New York, NY. Sabbagh, K., 1996, Twenty First Century Jet- The Making and Marketing of The Boeing 777, Scribner,
New York, NY. Sand, J.C., Gu, P., and Watson, G., 2002, HOME: house of modular enhancement - a tool for modular
product redesign, Concurrent Engineering: Research and Applications, 10(2): 153-164. Sanderson, S., and Uzumeri, M., 1995, Managing product families: The case of the Sony Walkman,
Research Policy, 24(5): 761-782. Sanderson, S.W., and Uzumeri, M., 1997, Managing Product Families, Irwin, Chicago, IL.
References 541
Sands, J., Loughlin, W., and Lu, F., 1998, Equipment Standardization under Acquisition Reform, Journal of Ship Production, 14(2): 110-123.
Sawhney, M.S., 1998, Leveraged high-variety strategies: from portfolio thinking to platform thinking, Journal of the Academy of Marketing Science, 26(1 ): 54-61.
Scheidt, L.G., and Zong, S., 1994, Approach to achieve reusability of electronic modules, Proceedings of the 1994 IEEE International Symposium on Electronics & the Environment, San Francisco, CA, USA, Paper No. 331-336.
Schlueter, J., 2004, Prepaid wireless: Launching a new platform for the burgeoning market of pay-as-yougo services, Platform Management for Continued Growth Conference, Atlanta, GA, PDMA.
Schonberger, R.J., 1986, World Class Manufacturing- The Lesson of Simplicity Applied, The Free Press, New York.
Seepersad, C.C., Hernandez, G., and Allen, J. K., 2000, A quantitative approach to determining product platform extent, ASME Design Engineering Technical Conferences - Design Automation Conference, Renaud, J. E. (Ed.), Baltimore, MD, ASME, Paper No. DETC2000/DAC-14288.
Seepersad, C.C., Mistree, F., and Allen, J.K., 2002, A quantitative approach for designing multiple product platforms for an evolving portfolio of products, ASME Design Engineering Technical Conferences - Design Automation Conference, Fadel, G. (Ed.), Montreal, Quebec, Canada, ASME, Paper No. DETC2002/DAC-34096.
Sella, M., 1998, It cuts both ways, Worth, September, pp. 82-93. Shaukat, M.M., 2001, Modularity, Platforms, and Customization in the Automotive Industry, M.S. Thesis,
Department of Industrial & Manufacturing Engineering, Penn State University, University Park, PA.
Shierholt, K., 2001, Process configuration: Combining the principles of product configuration and process planning, Artificial Intelligence in Engineering Design, Analysis, and Manufacturing, 15(5): 411-424.
Shimokawa, K., Jurgens, U., and Fujimoto, T., 1997, Transforming Automobile Assembly: Experience in Automation and Work Organization, Springer, New York.
Shirley, G.V., 1990, Models for managing the redesign and manufacture of product sets, Journal of Manufacturing and Operations Management, 3(2): 85-104.
Siddique, Z., 2000, Product Platform Development: Designing for Product Variety, Ph.D. Dissertation, G. W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
Siddique, Z., 2001, Estimating reduction in development time for implementing a product platform approach, ASME 2001 Design Engineering Technical Conferences, Pittsburgh, PA, ASME, Paper No. DETC2001/CIE-21238.
Siddique, Z., and Repphun, B., 2001, Estimating cost savings when implementing a product platform approach, Concurrent Engineering: Research and Application, 9(4): 285-294.
Siddique, Z., Rosen, D.W., and Wang, N., 1998, On the applicability of product variety design concepts to automotive platform commonality, ASME Design Engineering Technical Conferences - Design Theory and Methodology, Atlanta, GA, ASME, Paper No. DETC98/DTM-5661.
Simon, H.A., 1996, Sciences of the Artificial, The MIT Press, Cambridge, MA. Simpson, T.W., 1998, A Concept Exploration Method for Product Family Design, Ph.D. Dissertation,
G.W. Woodruff School of Mechanical Engineering, Georgia Institute ofTechnology, Atlanta, GA. Simpson, T.W., 2004, Product platform design and customization: Status and promise, A/EDAM, 18(1):
3-20. Simpson, T.W., Chen, W., Allen, J.K., and Mistree, F., 1999, Use of the robust concept exploration
method to facilitate the design of a family of products, in Simultaneous Engineering: Methodologies and Applications, Roy, U., Usher, J.M., and Parsaei, H.R. (Eds.), Gordon and Breach Science Publishers, Amsterdam, The Netherlands, pp. 247-278.
Simpson, T.W., and D'Souza, B., 2004, Assessing variable levels of platform commonality within a product family using a multiobjective genetic algorithm, Concurrent Engineering: Research and Applications, 12(2): 119-130.
Simpson, T.W., Maier, J.R.A., and Mistree, F., 2001a, Product platform design: method and application, Research in Engineering Design, 13(1): 2-22.
Simpson, T.W., Seepersad, C.C., and Mistree, F., 2001 b, Balancing commonality and performance within the concurrent design of multiple products in a product family, Concurrent Engineering: Research and Applications, 9(3): 177-190.
Smith, J., and Duffy, A., 2001, Modularity in support of design for re-use, International Conference on Engineering Design, Glasgow.
Smith, P.G., and Reinertsen, D.G., 1991, Developing Products In Half The Time, Van Nostrand Reinhold, New York.
542 References
Sodhi, M., and Knight, W.A., 1998, Product design for disassembly and bulk recycling, CIRP Annals, 47(1): 115-118.
Sosa, M., Eppinger, S., and Rowles, G., 2003, Identifying modular and integrative systems and their impact on design team interactions, Journal of Mechanical Design, 125(1 0): 240-252.
Srinivas, N., and Deb, K., 1995, Multiobjective function optimization using non dominated sorting genetic algorithms, Evolutionary Computation Journal, 2(3): 22 I -248.
Stalk, G., Jr., and Hout, T., 1990, Competing Against Time, The Free Press, New York. Stalk, G., Jr., and Webber, A.M., I 993, Japan's dark side of time, Harvard Business Review, 71(4): 93-
102. Steiner, W.J., and Hruschka, H., 2002, A probabilistic one-step approach to the optimal product line
design problem using conjoint and cost data, Review of Marketing Science Working Papers, 1(4): Working Paper 4, http://www.bepress.com/roms/vol I /iss4/paper4.
Stone, R.B., Wood, K.L., and Crawford, R.H., I 998, A heuristic method to identify modules from a functional description of a product, ASME Design Engineering Technical Conference, Atlanta, Georgia, Scp. I 3- I 6, Paper No. DETC98/DTM-5642.
Stone, R.B., Wood, K.L., and Crawford, R.H., 2000a, A heuristic method to identify modules from a functional description of a product, Design Studies, 21(1): 5-31.
Stone, R.B., Wood, K.L., and Crawford, R.H., 2000b, Using quantitative functional models to develop product architectures, Design Studies, 21(3): 239-260.
Stratasys FDM Technologies, 2003, http://www.stratasys.com. Sudharshan, D., May, J.H., and Shocker, A.D., 1987, A simulation comparison of methods for new
product location, Marketing Science, 6(2): 182-201. Sudjianto, A., and Otto, K., 2001, Modularization to support multiple brand platforms, ASME Design
Engineering Technical Conferences, Pittsburgh, DETC2001/DTM-21 695. Sub, N., 2001, Axiomatic Design: Advances and Applications, Oxford University Press, New York, NY. Sundgren, N., I 999, Introducing interface management in new product family development, Journal of
Product Innovation Management, 16(1): 40-51. Tanaka, M., 1989, Cost planning in the design phase of a new product, in Japanese Management
Accounting, Mondem, Y., Sakurai, M. (Eds.), Productivity Press, Cambridge, MA. Ten Brinke, E., Lutters, E., Streppel, T., and Kals, H.J.J., 2000, Variant-based cost estimation based on
information management, International Journal of Production Research, 38(1 7): 4467-4479. Terwiesch, C., and Loch, C. H., I 999, Managing the process of engineering change orders: the case of the
climate control system in automobile development, Journal of Product Innovation Management, I 6(2): 160-172.
Thevenot, 1-I.J., Nanda, J., and Simpson, T.W., 2005, A methodology to support product family redesign using a genetic algorithm and commonality indices, ASME International Design Engineering Technical Conferences - Design Automation Conference, Long Beach, CA, Paper No. DETC2005/DAC-84927.
Thevenot, 1-I.J., and Simpson, T.W., 2004, A comparison of commonality indices for product family design, ASME International Design Engineering Technical Conferences - Design Automation Conference. Salt Lake City, UT, Paper No. DETC2004/DAC-57 141.
Thevenot, H.J., and Simpson, T.W., 2006, Commonality indices for product .family design: A detailed comparison, Journal of Engineering Design, in press.
Thomke, S.H., I 997, The role of flexibility in the development of new products: An empirical study, Research Policy, 26(1): 105-119.
Thonemann, U.W., and Brandeau, M.L., 2000, Optimal commonality in component design, Operations Research, 48(1 ): I -19.
Torenbcck, E., 1976, Synthesis of Subsonic Airplane Design, Delft University Press, Delft, The Netherlands.
Train, K.E., 2003, Discrete Choice Methods with Simulation, Cambridge University Press, UK. Ulrich, K.T., 1995, The role of product architecture in the manufacturing firm, Research Policy, 24(3):
419-440. Ulrich, K.T., and Eppinger, S.D., 2004, Product Design and Development, McGraw-Hill/Irwin, New
York. Ulrich, K.T., and Pearson, S.A., 1993, Does product design really determine 80% of manufacturing cost?
MIT Sloan School of Management, Cambridge, MA, pp. 3 I. Ulrich, K.T., and Pearson, S.A., I 998, Assessing the importance of design through product archaeology,
Management Science, 44(3): 352-369.
References 543
Ulrich, K.T., and Tung, K., 1991, Fundamentals of product modularity, ASME Winter Annual Meeting, Atlanta, GA, ASME, 39: 73-80.
Umeda, Y., Shimomura, Y., Yoshioka, M., and Tomiyama, T., 1999, A proposal of design methodology for upgradeable products, ASME Design Engineering Technical Conferences - Design for Manufacturing, Las Vegas, NV, ASME, Paper No. DETC99/DFM-8969.
Uppal, K.B., 1996, Estimating engineered equipment costs, AA CE Transactions 40: EST.! 0.1-EST.l 0.6. Uzumeri, M., and Sanderson, S., 1995, A framework for model and product family competition, Research
Policy, 24(4): 583-607. Valiente, G., 2002, Algorithms on Trees and Graphs, Springer-Verlag, Berlin. van Veen, E.A., 1992, Modeling Product Structures by Generic Bills-of-Materials, Elsevier, New York. Veinott, C.G., and Martin, J.E., 1986, Fractional and Subfractional Horsepower Electric Motors,
McGraw-Hill, New York. Vollrath, K., 2001, Flugzeug der Zukunft fliegt mit Feinguss, VDI nachrichten, Duesseldorf, pp. 19. von Hippe!, E., 1990, Task partitioning: An innovation process variable, Research Policy, 19(5): 407-
418. Wacker, .J.G., and Trelevan, M., 1986, Component part standardization: An analysis of commonality
sources and indices, Journal of Operations Management, 6(2): 219-244. Wang, L.C., and Wu, S.Y., 1998, Modeling with colored timed object-oriented Petri nets for automated
manufacturing systems, Computers and Industrial Engineering, 34(2): 463-480. Westkamper, E., Schmidt, T., and Wiendahl, H.H., 2000, Production planning and control with learning
technologies: Simulation and optimization of complex production processes, Knowledge-based Systems, Leondes, G., (Ed.).
Weustink, I.F., Ten Brinke, E., Streppel, A.H., and Kals, H.J.J., 2000, A generic framework for cost estimation and cost control in product design, Journal of Materials Processing Technology, 103(1 ): 141-148.
Wheelwright, S.C., and Clark, K.B., 1992, Revolutionizing Product Development: Quantum Leaps in Speed, Efficiency, and Quality, The Free Press, New York, NY.
Wheelwright, S.C., and Clark, K.B., 1995, Leading Product Development, Free Press, New York, NY. Wheelwright, S.C., and Sasser, W.E. Jr., 1989, The new product development map, Harvard Business
Review, 67(3): 112-125. Whitney, D.E., 1993, Nippondenso Co. Ltd.: A case study of strategic product design, Research in
Engineering Design, 5(1): 1-20. Wilhelm, B., 1997, Platform and modular concepts at Volkswagen- their effect on the assembly process,
in Transforming Automobile Assembly: Experience in Automation and Work Organization, Shimokawa, K., Jurgens, U., and Fujimoto, T. (Eds.), Springer, New York, pp. 146-156.
Wilkins, D., 2005, Classic Cars: Cadillac Cimarron, The Independent, March 22, Online Edition, http://motoring.independent.co.uk/features/article7325.ece, 9 pgs.
Willcox, K., and Wakayama, S., 2003, Simultaneous optimization of a multiple-aircraft family, Journal of Aircraft, 40(4): 616-622.
Williams, C.B., Allen, J.K., Rosen, D.W., and Mistree, F., 2004, Designing platforms for customizable products in markets with non-uniform demand, Proceedings of ASME Design Theory Methodology Conference, Salt Lake City, UT, DETC2004/DTM-57469.
Williams, C.B., Panchal, J.H., and Rosen, D.W., 2003, A general decision-making method for the rapid manufacturing of customized parts, Proceedings of ASME Computer and Information in Engineering Conference, Chicago, Ill., DETC2003/CIE-48198.
Womack, J.P., Jones, D.T., and Roos, D., 1990, The Machine that Changed the World, Rawson Associates, New York, NY.
Wortmann, J.C., Muntslag, D.R., and Timmerrnans, P.J.M., 1997, Customer-Driven Manufacturing, Chapman and Hall, London.
Yang, L., and Gao, Y., 1996, Fuzzy Mathematics: Theory and Applications, Springer, New York, NY. Yano, C., and Dobson, G., 1998, Profit optimizing product line design, selection and pricing with
manufacturing cost considerations, in Product Variety Management: Research Advances, Ho, T.-H., Tang, C.S. (Eds.), Kluwer Academic Publisher, pp. 145-176.
Yin, R.K., 1994, Case Study Research: Design and Methods, Sage publications, Thousand Oaks, CA. Zamirowksi, E.J., and Otto, K.N., 1999, Identifying product portfolio architecture modularity using
function and variety heuristics, ASME Design Engineering Technical Conferences - Design Theory and Methodology, Las Vegas, NV, ASME, Paper No. DETC99/DTM-8760.
Zhang, D., and Hebert, M., 1999, Harmonic maps and their applications in surface matching, IEEE Conference on Computer Vision and Pattern Recognition, 2, 7 pgs.
544 References
Zhang, L., Jiao, J., and Pokharel, S., 2004, Internet-enabled information management for configure-toorder product fulfillment, Asia Pacific Management Review, 9(5): 851-876.
Zhang, Y., and Gershenson, J.K., 2003, An initial study of direct relationships between life-cycle modularity and life-cycle cost, Concurrent Engineering: Research and Application, 11(2): 121-128.
Zhang, Y., Gershenson, J.K., and Allamneni, S., 2001, Determining relationships between modularity and cost in product retirement, ASME Design Engineering Technical Conferences - Design Theory and Methodology Conference, Pittsburgh, PA, ASME, Paper No. DETC200liDTM-21686.
Zillober, C., 2001, Software manual for SCPIP 2.2, Informatik, Universitaet Bayreuth, Bayreuth.
Index
ABB 475-478, 491 Activity-based costing (ABC)
14, 327, 330, 335, 336, 339, 343,346,360,375
Activity-based time 360 Activity hierarchy 362, 363, 370,
371,375 Analytical target cascading 225-
227,229-231,233-235,237-239
Apple 77, 79, 80, 90 Architecture costing 305, 307,
312,325,326,331-334 Assembly system 30 Attribute quantification 189 Audi4,5,22,83-85
Bill of Materials (BOM) 495 BMW 478 Branch and bound, 153, 155
CAD 403-409, 412, 414, 419, 504-506
Cetetherm Platform System (CPS) 521-523
Cetetherm 513-518
Combinatorial selection 190 Common Gateway Interface
(CGI) 510 Commonality 160, 194, 199-201,
204,211-216,218,219 Commonality index 405,410,
414 Commonality plan 343, 344, 349-
351,355,356 Configuration synthesis 188 Conjoint analysis 93, 94, 96, 100,
102, 106 Constructal theory 427, 430, 440 Cost distribution 363, 364, 371 Cost driver 98 Cost of variety 422 Cost structure 192, 193, 196, 209 Customer demand 2, 34,478,
481,487,490 Customer need(s) 2, 7, 11, 14, 19,
21,26,30,41,43-45,51,54, 55, 71, 88, 91, 107
Customer preference 12, 31, 92-97, 102, 106
Customer requirement 2, 19, 22-24,70,92,154
546
Customer satisfaction 2, 11, 51, 54, 70, 71
Customer segment 480 Customer specification 503, 505,
511 Customization 1, 2, 4, 15, 19, 31,
85,91,92,98 Cycle time 28, 75, 98, 99
Daimler Chrysler 478 Data mining 390, 391, 400, Decision Support Problem 430,
431,440 Decision-based design 155 Decision-making 44, 46, 52, 100 Decomposition 225, 228 Design structure matrix (DSM)
61 Deterministic first choice rule 96 Domain framework 10 Dynamic programming 153, 155
Engineering Resource Planning (ERP) 491,497
Fixed Costs of Variety (FCV) 483,484
Flexible Manufacturing Systems (FMS) 422
Ford Motor Company 1 Fuji 6 Functional variety 480, 481, 488 Function-component allocation
310,317-318,320,323,324, 330
Generalized reduced gradient algorithm (GRG) 140, 141, 152, 153, 155
Genetic algorithm (GA) 103, 126, 146, 147, 153, 155
Geometrical feature 412
Index
Gillette 81, 82 General Motors 73, 74, 80, 83 Goal programming, 140, 145
Heat Exchanger 515, 520 Heat Exchanging System 520,
521,524
Innovation factory 460, 463, 467 Integer programming 155
Linear programming 155
Manufacture-to-order, 423 Market segmentation 12, 73, 75,
77-81, 83, 85-90 Market share 3, 4, 6, 24, 25, 73,
75, 83, 93-97 Mass customization 85, 91-92,
379,386,400,402,420-424 Model instantiation 188, 189 Modular combination 429, 437 Modularization 517, 520, 525 Multi-attribute utility function
430,442 Multinomiallogit choice rule 97 Multi-platform 243, 244, 246,
248,284-287,289-295
Nippondenso 6 Nissan 2, 83, 84 Non-linear programming 15 5
Optimization 8-13,49,92, 94, 97, 100, 103, 106, 126, 129, 133, 134, 138-140, 142-148, 151, 153-156, 159, 161-164, 172, 226-230, 238, 273-275, 277,279,284-287,290,292, 294
Original Equipment Manufacturers (OEM) 478
Index
Orthogonal array 102, 153, 155
Pareto frontier 134, 139 Part-worth utility 96, 102, 103 Pattern search 153, 155 Penalty function 98, 144 Physical Programming 142, 144,
145, 155 Platform design 421, 424, 428 Platform extent 241-249, 284-
286, 291-295 Platform planning 10, 12, 19-26,
32,73,88,89,343-347,349, 351,355,357
Platform strategy 346, 351, 353, 359-362, 364-366, 368, 369, 375
Platforrning 241, 243-245, 247, 251,254,266,269,270, 273, 276-278, 282-286, 290, 293,335
Pragmatic costing approach 98, 106
Probabilistic choice rule 97 Process family 378, 380, 395 Process parameter platform 422,
424,429 Process platform 377-379, 381-
386,388,390,398,400,402 Process variety 378, 379, 381,
390 Product architecture 7, 8, 14, 22,
25-27,30,32,36,38,42,45, 72,75,242-248,252,294, 305-313, 315-326, 328, 329, 331,334
Product behavior predictions 503 Product customization 427, 428 Product design generator (PDG)
499-503 Product development 2-11, 13-
15,19,22,24,26-29,31,33,
547
38,42,46,49,50,62, 73, 75, 76, 88-91, 107
Product dissection 459 Product family architecture 413,
417,497 Product family design 335, 336,
338,343,346,357,378 Product family 1, 3, 5, 6, 8-15,
28-38, 40-47, 52, 56, 60, 73, 77, 78,88,89,91-94,99, 100, 103-108, 110-112, 116, 117,119,121,122,124-129, 133, 134, 139, 143, 144, 146, 147, 151-156, 157, 158, 161,163-165,167,169,225, 229-2333, 235-237, 239, 413, 461, 468, 471
Product Generation Schematic (PGS) 502, 503, 505
Product life cycle 28, 42, 44 Product line 2, 6, 11, 21, 22, 24-
26,29,38,75-77,86,88,91, 93, 106, 107, 111, 121, 135
Product Platform Constructal Theory Method (PPCTM) 426,428,430
Product platform(s) 2, 3, 5, 6, 8, 11-13, 15, 19-21, 23-26, 28, 30-32, 36, 39, 40, 41, 43, 45, 47,49,50,63, 71, 73, 74, 76-78, 82-85, 87-90, 124, 133-135, 137, 139, 141, 143, 145, 147, 149, 151, 153-156, 157,158,426,428,454, 476,500,506
Product portfolio 11, 23, 25, 74 Product strategy 19-22, 76, 77 Product structure 109, 110, 117 Product variant 22, 49, 55, 57, 64,
67,69, 70,92,98, 143,158 Product variety 1, 2, 11, 13, 28,
29, 51, 55, 71, 91, 98, 186-
548
197, 199-201,203-205,207-213,215,217,220,222, 223,421,424,478,487,492
Production configuration 377, 378,379,384-388,395
Quality function development (QFD) 8, 23, 93, 489
Reconfigurable Manufacturing Systems (RMS) 423
Robust design 33, 154
Sales Configurators 491, 497 Scale economies 5 Shape commonality 404, 407,
410,413 Similarity measure 391 Simulated annealing 153, 155 Sony 5, 6, 28, 30, 114 Standard time 98, 102, 103, 106 Standardization 436, 445, 495 Supply chain 23, 30, 89 System structure synthesis 188
Text mining 390-393 Tree matching 390, 392, 393
Value chain 3, 30 Variable Costs of Variety (VCV)
483 Voice of the Customer (VOC) 88,
89 Volkswagen 4, 83-85 VRML 511
Web application 500, 509
XML511
Index
