REFERENCES

1. Jain N.K, Jain V.K (2001) "Modeling of material removal In mechanical type advanced machining processes: A state-of-art review", Int J Mach Tools Manuf 41(11): pp. 1573-1635.

2. Benedict GF (1987) Nontraditional Manufacturing Processes. Marcel Dekker Inc, New York.

3. McGeough JA (1988) Advanced Machining Methods. Chapman and Hall, London.

4. Merchant ME (1962) Newer Methods for the Precision Working of Metals-Research.and Present Status. Proc Int Con Production Res ASME: pp. 93-107.

5. Kalpakjian S, Schmid SR, Material removal processes: abrasive, chemical, electrical and high-energy beam, in: Manufacturing Processes for Engineering Materials, Prentice Hall, New Jersey, 2003, p. 541.

6. Webzell S, That first steps into EDM, in: Machinery, 159, (4040) Findlay Publications Ltd, Kent, UK, November 2001, p. 41.

7. Anonymous, History and development, in: The Techniques and Practice of Spark Erosion Machining, Sparcatron Limited, Gloucester, UK, 1965, p. 6.

8. A.L. Livshits, Introduction, in: Electro-erosion Machining of Metals, Department of Scientific & Industrial Research, Buttenvorth & Co., London, 1960, p. x.

9. E.C. Jameson, Description and development of electrical discharge machining (EDM), in: Electrical Discharge Machining, Society of Manufacturing Engineers, Dearbem, Michigan, 2001, p. 12.

10. L. Houman, Total EDM, in: E.C. Jameson (Ed.), Electrical Discharge Machining: Tooling, Methods and Applications, Society of Manufacturing Engineers, Dearbern, Michigan, 1983, pp. 5-19.

11. W. Konig, D.F. Dauw, G. Levy, U. Panten, EDM—future steps towards the machining of ceramics, Ann. CIRP 37 (2) (1988) pp. 623-631.

12. H.C. Tsai, B.H. Yan, F.Y. Huang, EDM performance of Cr/Cu based composite electrodes, Int. J. Mach. Tools Manuf. 43 (3) (2003) pp. 245-252.

205

13. G. Boothroyd, A.K. Winston, Non-conventional machining processes, in: Fundamentals of Machining and Machine Tools, Marcel Dekker, Inc, New York, 1989, p. 491.

14. J.A. McGeough, Electro discharge machining, in: Advanced Methods of Machining, Chapman & Hall, London, 1988, p. 130.

15. S.F. Krar, A.F. Check, Electrical discharge nriachining, in: Technology of Machine Tools, Glencoe/McGraw-Hill, New York, 1997, p. 800.

16. Qu, J., Shih, A. J., and Scattergood, R.. 2002. "Development of the Cylindrical Wire Electrical Discharge Machining Process, Part I: Concept, Design, and Material Removal Rate," Journal of Manufacturing Science and Engineering.

17. Beste, U., Hammerstrom, L., Engqvist, H., Rimlinger, S., and Jacobson, S., 2001,"Particle erosion of cemented carbides with low Co content." Wear, Vol. 250-251, pp. 809-817.

18. Pugsley, V.A., Allen, C, 1999, "Microstructure/property relationships in the cavitation erosion of tungsten carbide-cobalt," Wear, Vol. 233-235. pp. 93-103.

19. Guilemany, J.M., Llorca, I.N., and Szabo, P.J., 1996, "Residual Stress Characterization of Grit Blasted Steel Surfaces." Surface Engineering, Vol. 12, No.1, pp. 77-79.

20. Hung, N.P.. Teong. L.H.. and Yoong, CM., 1996, " Review of Unconventional Machining of Metal Matrix Composites," Proceedings of the 1996 3rd Biennial JointConference on Engineering Systems Design and Analysis, ASME PD, New York.NY. Vol. 75, No. 3, pp. 47-53.

21. J. Tlusty, "Manufacturing processes and equipment." Prentice-Hall, pp. 859-860, 2000.

22. Stevens. Luc Antoon. "Improvement of surface quality in die-sinking EDM" Ph. D. dissertation, Kathoholieke University LEUVEN (BELGIUM). 1998.

23. R. Snoeys. F. Van Dijck and J. Peters "Plasma channel diameter growth affects stock removal in EDM," Annals of CIRP Vol.21/1, p. 39, 1972.

24. Chien-Nan Yang, "Physical modeling of wire-cut Electrical Discharge Machining," Ph.D. Thesis, University of California Davis, 1995.

206

25. L.C. Lee, L.C. Urn, V. Narayanan, V.C. Venkatesh, Quantification of surface damage of tool steels after EDM, Int. J. Mach: Tools Manuf 28 (4) (1988) pp. 359-372.

26. L.C. Lee, L.C. Lim, Y.S. Wong, H.H. Lu, Towards a better understanding of the surface features of electro-discharge machined tool steels, J. Mater. Process.Technol. 24 (1990)

27. Y.F. Luo, The dependence of interspace discharge transitivity upon the gap debris in precision electro-discharge machining, J. Mater. Process. Technol. 68 (2) (1997) pp. 121-131.

28. M. Bayramoglu, A.W. Duffill, Systematic investigation on the use of cylindrical tools for the production of 3D complex shapes on CNC EDM machines. Int. J. Mach. Tools Manuf 34 (3) (1994) 327-339.

29. Arthur, P.M. Dickens, R.C. Cobb, Using rapid prototyping to produce electrical discharge machining electrodes. Rapid Prototyping J.2 (1)(1996)pp. 4-12.

30. F.T. Weng, M.G. Her, Study of the batch production of micro parts using the EDM process, Int. J. Adv. Manuf Technol. 19 (4) (2002) pp. 266-270.

31. K.P. Rajurkar, Z.Y. Yu, 3D micro-EDM using CAD/CAM, Ann. CIRP 49(1) (2000) pp. 127-130.

32. T. Masuzawa, State of the art of micromachining, Ann. CIRP 49 (2) (2000) pp. 473-488.

33. T. Masuzavi/a, M. Fujino, K. Kobayashi, Wire electro-discharge grinding for micro-machining, Ann. CIRP 34 (1) (1985) 431-434.

34. T. Masuzawa, C.L. Kuo, M. Fujino, A combined electrical machining process for micro nozzle fabrication, Ann. CIRP 43 (1) (1994) pp. 189-192.

35. Z.Y. Yu, T. Masuzawa, M. Fujino, Micro-EDM for three dimensional cavities—development of uniform wear method, Ann.CIRP 47(1) (1998) pp. 169-172.

36. S.H. Yeo, G.G. Yap, A feasibility study on the micro electro discharge machining process for photo mask fabrication. Int. J. Adv. Manuf. Technol. 18 (1) (2001) pp.7-11.

37. Ishida, Y. Takeuchi, L-shaped curved hole creation by means of electrical discharge machining and an electrode curved motion generator, Int. J. Adv. Manuf Technol. 19 (4) (2002) pp. 260-265.

207

38. M.K. Fukui, N. Kinoshita, Developing a 'mole' electric discharge digging machining, Ann. CIRP 38 (1) (1989) pp.203-206.

39. S. Ichiyasu, A. Takeuchi, K. Watanabe, A. Goto, T. Magara, Machining curved tunnel for coolant with mole EDM, in: Proceedings of the Fourth International Conference on Die and Mould Technology, Kuala Lumpur, Malaysia, 1997.

40. J.A. Sanchez, I. Cabanes, L.N. Lopez de Lacalle, A. lamikiz. Development of optimum electro discharge machining technology for advanced ceramics, Int. J. Adv. Manuf. Technol. 18 (12) (2001) pp.897-905.

41. T.C. Lee, J.H. Zhang, W.S. Lau, Machining of engineering ceramics by ultrasonic vibration assisted EDM method, J. Mater. Manuf. Processes 13 (1) (1998) pp. 133-146.

42. R.F. Firestone, Ceramic—Applications in Manufacturing, Society of Manufacturing Engineers, Michigan, 1988 p. 133.

43. N. Mohri, Y. Fukuzawa, T. Tani, N. Saito, K. Fuoitani, Assisting electrode method for machining insulating ceramics, Ann. CIRP 45 (1) (1996) pp. 201-204.

44. N. Mohri, Y. Fukuzawa, T. Tani, T. Sata, Some considerations to machining characteristics of insulating ceramics— t̂owards practical use in industry, Ann. CIRP 51 (1) (2002) pp. 161-164.

45. T. Matsuo, E. Oshima, Investigation on the optimum carbide content and machining condition for wire EDM of zirconia ceramics, Ann. CIRP 41 (1) (1992) pp.231-234.

46. B.H. Yan, C.C. Wang, W.D. Liu, F.Y. Huang, Machining characteristics of AI2O3/6061AI composite using rotary EDM with a disklike electrode, Int. J. Adv. Manuf. Technol. 16 (5) (2000) pp. 322-333.

47. A.G. Mamalis, N.M. Vaxevanidis, D.I. Pantelis, on the electro discharge machining of ceramic plasma-sprayed steel plates, Ann. CIRP 41 (1) (1992) pp.235-238.

48. F. Muller, J. Monaghan, Non-conventional machining of particle reinforced metal matrix composite. Int. J. Mach. Tools Manuf. 40 (9) (2000) pp. 1351-1366.

49. J.S. Soni, G. Chakraverti, Experimental investigation on migration of material during EDM of die steel (T215 Cr12), J. Mater. Process. Technol. 56 (1-4) (1996) pp. 439-451.

208

50. F. Roethel, L. Kosec, V. Garbajs, J. Peklenik, Contribution to the micro-analysis of the spark eroded surfaces, Ann. CIRP 25 (1) (1976) pp. 135-140.

51. Erden, Effect of materials on the mechanism of electric discharge machining (EDM), J. Eng. IVIater. Technol. 105 (1983) pp. 132-138.

52. A.Gangadhar, M.S. Sunmugam, P.K. Philip, Pulse train studies in EDM with controlled pulse relaxation. Int. J. Mach. Tools Manuf. 32 (5) (1992) pp. 651-657.

53. A.Singh, A. Ghosh, A thermo-electric model of material removal during electric discharge machining. Int. J. Mach. Tools Manuf. 39 (4) (1999) pp. 669-682.

54. A.M. Gadalla, W. Tsai, Machining of WC-Co composites, Mater. Manuf. Processes 4 (3) (1989) pp. 411-423.

55. T.C. Lee, W.S. Lau, Some characteristics of electrical discharge machining of conductive ceramics. Mater. Manuf. Processes 6 (4) (1991) pp. 635-648.

56. M. Bayramoglu, A.W. Duffill, Manufacturing linear and circular contours using CNC EDM and frame type tools, Int. J. Mach. Tools Manuf. 35 (8) (1995) pp. 1125-1136.

57. K. Saito, T. Kishinami, H. Konno, M. Sato, H. Takeyama, Development of numerical contouring control electrical discharge machining (NCC-EDM), Ann. CIRP 35 (1) (1986) pp. 117-120.

58. T. Kaneko, M. Tsuchiya, Three dimensionally controlled EDM using cylindrical electrodes, J. Japan Soc. Electr. Machining Eng. 18 (35) (1984) pp. 1-4.

59. P. Bleys, J.P. Kruth, B. Lauwers, A. Aryd, R. Delpretti, C. Tricarico, Real-time tool wear compensation in milling EDM, Ann. CIRP 51 (2) (2002) pp. 157-160.

60. Y.S. Wong, C.F. Noble, Electrical discharge machining with transverse tool movement, in: M.T.D.R. Conference, 1986.

61. M. Kunieda, H. Muto, Development of multi-spari< EDM, Ann. CIRP 49(1) (2000) pp. 119-122.

62. N. Mohri, N. Saito, T. Takawashi, K. Kobayashi, Mirror-like finishing by EDM, in: Proceedings of the 25th MTDR Conference, 1985.

209

63. M. Kunieda, S. Furuoya, N. Taniguchi, Improvement of EDM efficiency by supplying oxygen gas into gap, Ann. CIRP 40 (1) (1991) pp.215-218.

64. N. Mohri, M. Suzuki, M. Furuya, N. Saito, Electrode wear process in electrical discharge machining, Ann. CIRP 44 (1) (1995) 165-168.

65. J. Marafona, C. Wykes, A new method of optimizing material removal rate using EDM with copper-tungsten electrodes, Int. J.Mach. Tools Manuf. 40 (2) (2000) pp. 153-164.

66. N. Mohri, H. Takezawa, K. Furutani, Y. Ito, T. Sata, A new process of additive and removal machining by EDM with a thin electrode, Ann. CIRP 49 (1) (2000) pp. 123-126.

67. R. Snoeys, F. Staelens, W. Dekeyser, Current trends in non-conventional machining techniques, Ann. CIRP 35 (2) (1986) pp. 467- 480.

68. F. Staelens, J.P. Kruth, A computer integrated machining strategy for planetary EDM, Ann. CIRP 38 (1) (1989) pp. 187-190.

69. D. Dauw, R. Snoeys, On the derivation and application of a real-time tool wear sensor in EDM, Ann. CIRP 35 (1) (1986) 111-116.

70. M. Kunieda, M. Yoshida, N. Taniguchi, Electrical discharge machining in gas, Ann. CIRP 46 (1) (1996) pp. 143-146.

71. D. Dauw, Geometrical simulation of the EDM die-sinking process, Ann. CIRP 37 (1) (1988) pp. 191-196.

72. M. Kunieda, M. Kiyohara, Simulation of die-sinking EDM by discharge location searching algorithm, Int. J. Electr. Machining 3 (1998) pp. 79-85.

73. M. Kunieda, W. Kowaguchi, T. Takita, Reverse simulation of die-sinking EDM, Ann. CIRP 48 (1) (1999) pp. 115-118.

74. L.C. Lim, L.C. Lee, Y.S. Wong, H.H. Lu, Solidification microstructure of electro discharge machined surfaces of tool steels. Mater. Sci. Technol. 7 (1991) pp.239-248.

75. P.C. Pandey, S.T. Jilani, Plasma channel growth and the resolidified layer in EDM, Precision Eng. 8 (2) (1986) pp. 104-110.

76. Y.C. Lin, B.H. Yan, F.Y. Huang, Surface improvement using a combination of electrical discharge machining with ball burnish

210

machining based on the Taguchi method, Int. J. Adv. Manuf. Technol. 18 (9) (2001) pp. 673-682.

77. O.A. Abu Zeid, On the effect of electro-discharge machining parameters on the fatigue life of AISI D6 tool steel, J. Mater. Process. Technol. 68 (1) (1997) pp.27-32.

78. J.P. Kmth, L. Stevens, L. Froyen, B. Lauwers, Study of the white layer of a surface machined by die-sinking electro-discharge machining, Ann. CIRP 44 (1) (1995) pp. 169-172.

79. J.D. Ayers, K. Moore, Formation of metal carbide powder by spark machining of reactive metals, Metal. Trans. A 15A (1984) pp.1117-1127.

80. P.F. Thomson, Surface damage in electro discharge machining, Mater. Sci. Technol. 5 (1989) pp. 1153-1157.

81. Gangadhar, M.S. Sunmugam, P.K. Philip, Surface modification in electrodischarge processing with a powder compact tool electrode, Wear 143 (1991) pp. 45-55.

82. N. Mohri, N. Saito, Y. Tsunekawa, Metal surface modification by electrical discharge machining with composite electrode, Ann. CIRP 42(1) (1993) pp. 219-222.

83. Y. Tsuekawa, N. Okumiya, N. Mohri, I. Takahashi, Surface modification of aluminium by electrical discharge alloying, Mater. Sci. Eng. A174 (1994) pp. 193-198.

84. M.P. Samuel, P.K. Philips, Power metallurgy tool electrodes for electrical discharge machining. Int. J. Mach. Tools Manuf. 37 (11) (1997) pp. 1625-1633.

85. J. Simao, H.G. Lee, D.K. Aspinwall, R.C. Dewes, E.M. Aspinwall, Workpiece surface modification using electrical discharge machining, Int J. Mach. Tools Manuf 43 (2) (2003) pp. 121-128.

86. A.M. Hassan, An investigation into the surface characteristics of burnished cast Al-Cu alloys. Int. J. Mach. Tools Manuf 37 (6) (1997) pp. 813-821.

87. A.M. Hassan, The effect of ball- and roller-burnishing on the surface roughness and hardness of some non-ferrous metals, J. Mater. Process. Technol. 72 (3) (1997) pp. 385-391.

211

88. N.H. Loh, S.C. Tarn, S. Miyazama, Application of experimental design in ball burnishing, Int. J. Mach. Tools Manuf. 33 (6) (1993) pp.841-852.

89. N.H. Loh, S.C. Tarn, Effects of ball burnishing parameters on surface finish—a literature survey and discussion. Precision Eng. 10 (4) (1988) pp. 215-220.

90. B.H. Yan, C.C. Wang, H.M. Chow, Y.C. Lin, Feasibility study of rotary electrical discharge machining with ball burnishing for AI2O3/6061AI composite. Int. J. Mach. Tools Manuf. 40 (10) (2000) pp. 1403-1421.

91. B.M. Schumacher, About the role of debris in the gap during electrical discharge machining, Ann. CIRP 39 (1) (1990) 197- 199.

92. Y.F. Tzeng, C.Y. Lee, Effects of powder characteristics on electro discharge machining efficiency. Int. J. Adv. Manuf. Technol. 17 (8) (2001) pp.586-592.

93. M.L. Jeswani, Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining. Wear 70 (1981) pp. 133-139.

94. N. Mohri, N. Saito, M. Higashi, A new process of finish machining on free surface by EDM methods, Ann. CIRP 40 (1) (1991) pp. 207-210.

95. Y.M. Quan, Y.H. Liu, Powder-suspension dielectric fluid for EDM, J. Mater. Process. Technol. 52 (1) (1995) pp.44-54.

96. K.M. Tsai, P.J. Wang, Predictions on surface finish in electrical discharge machining based upon neural network models. Int. J. Mach. Tools Manuf. 41 (10) (2001) pp. 1385-1403.

97. K.M. Tsai, P.J. Wang, Semi-empirical model of surface finish on electrical discharge machining. Int. J. Mach. Tools Manuf. 41 (10) (2001)pp.1455-1477.

98. M.L. Jeswani, Roughness and wear characteristics of spari< eroded surface, Wear 51 (1978) pp. 227-236.

99. J.H. Zhang, T.C. Lee, W.S. Lau, Study on the electro-discharge machining of a hot pressed aluminium oxide based ceramic, J. Mater. Process. Technol. 63 (1997) pp.908-912.

212

100. C.L. Lin, J.L. Lin, T.C. Ko, Optimization of the EDM process based on the orthogonal array with fuzzy logic and grey relational analysis method. Int. J. Adv. Manuf. Technol. 19 (4) (2002) pp. 271-277.

101. J.L. Lin, K.S. Wang, B.H. Yan, Y.S. Tarng, Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics, J. Mater. Process. Technol. 102 (2000) pp.48-55.

102. Y.F. Tzeng, F.C. Chen, A simple approach for robust design of high­speed electrical discharge machining technology. Int. J. Mach. Tools Manuf. 43 (3) (2003) pp. 217-227.

103. Cogun, A technique and its applications for evaluation of material removal contributions of pulses in electrical discharge machining. Int. J. Mach. Tools Manuf. 30 (1) (1990) pp. 19-31.

104. J.Y. Kao, Y.S. Tamg, A neutral-network approach for the online monitoring of ttie electrical discharge machining process, J. Mater. Process. Technol. 69 (1997) pp. 112-119.

105. H.S. Liu, Y.S. Tamg, Monitoring of the electrical discharge machining process by abductive networks. Int. J. Adv. Manuf. Technol. 13 (1997) pp. 264-270.

106. M. Week, J.M. Dehmer, Analysis and adaptive control of EDM sinking process using the ignition delay time and fall time as parameter, Ann. CIRP 41 (1) (1992) pp.243-246.

107. K.P. Rajurkar, M.W. Wang, R.P. Lindsay, A new model reference adaptive control of EDM, Ann. CIRP 38 (1) (1989) pp.183-186.

108. R. Snoeys, D.F. Dauw, J.P. Kruth, Improved adaptive control system for EDM processes, Ann. CIRP 29 (1) (1980) pp. 97-101.

109. D.F. Dauw, R. Snoeys, W. Dekeyser. Advanced pulse discriminating system for EDM process analysis and controls, Ann. CIRP 32 (2) (1983) pp.541-549.

110. S.F. Yu, B.Y. Lee, W.S. Lin, Waveform monitoring of electrical discharge machining by wavelet transform, Int. J. Adv. Manuf. Technol. 17 (5) (2001) pp. 339-343.

111. W.M. Wang, K.P. Rajurkar, K. Akamatsu, Digital gap monitor and adaptive integral control for auto-jumping in EDM, J. Eng. Ind. 117 (1995) pp. 253-258.

213

112. K.P. Rajurkar, M.W. Wang, R.P. Lindsay, Real-time stochastic model and control of EDM, Ann. CIRP 39 (1) (1990) pp. 187-190.

113. M. Boccadoro, D.F. Dauw, About the application of fuzzy controllers in high-performance die-sinking EDM machines, Ann. CIRP 44 (1) (1995) pp. 147-150.

114. Y.S. Tarng, CM. Tseng, LK. Chung, A fuzzy pulse discriminating system for electrical discharge machining, Int. J. Mach. Tools Manuf. 37 (4) (1997) pp. 511-522.

115. Y.S. Tarng, J.L. Jang, Genetic synthesis of a fuzzy pulse discriminator in electrical discharge machining, J. Intell. Manuf. 7 (1996) pp.311-318.

116. S.K. Bhattacharyya, M.F. El-Menshawy, Monitoring the EDM process by radio signals. Int. J. Prod. Res. 16 (5) (1978) 353-363.

117. S.K. Bhattacharyya, M.F. El-Menshawy, Monitoring and controlling the EDM process, J. Eng. Ind. 102 (1980) pp. 189-194.

118. K.P. Rajurkar, M.W. Wang, Improvement of EDM performance with advanced monitoring and control system, J. Manuf. Sci.Eng. 119 (1997) pp. 770-775.

119. P.M. Lonardo, A.A. Bnjzzone, Effect of flushing and electrode material on die sinking EDM, Ann. CIRP 48 (1) (1999) pp. 123-126.

120. Y.S. Wong, L.C. Lim, L.C. Lee, Effects of flushing on electro discharge machined surfaces, J. Mater. Process. Technol. 48 (1995) pp. 299-305.

121. Anonymous, Dielectric Fluids for Electro discharge Machining, British Petroleum Company, UK, 1982.

122. K. Kagaya, Y. Oishi, K. Yada, Micro-electro discharge machining using water as a working fluid—I: micro-hole drilling. Precision Eng. 8 (3) (1986) pp. 157-162.

123. G.F. Benedict, Electrical discharge machining (EDM), in: Nontraditional Manufacturing Processes, Marcel Dekker, Inc, New York & Basel, 1987, pp. 211-213.

124. T. Masuzawa, X.X. Cui, N. Taniguchi, Improved jet flushing for EDM, Ann. CIRP 41 (1) (1992) pp.239-242.

125. T. Masuzawa, C.J. Heuvelman, A self-flushing method with spark-erosion machining, Ann. CIRP 32 (1) (1983) pp. 109-111.

214

126. H.E. De Bruijn, T.H. Delft, A.J. Pekelaring. Effect of a magnetic field on the gap cleaning in EDM, Ann. CIRP 27 (1) (1978) pp. 93-95.

127. S. Enache, C. Opran, G. Stoica, E. Strajescu, The study of EDM with forced vibration of tool electrode, Ann. CIRP 39 (1) (1990) pp. 167-170.

128. V.S.R. Murti, P.K. Philip, A comparative analysis of machining characteristics in ultrasonic assisted EDM by the response surface methodology. Int. J. Prod. Res. 25 (2) (1986) pp.259-272.

129. Y.H. Guu, H." Hocheng, Effects of workpiece rotation on machinability during electrical discharge machining, J. Mater. Manuf. Processes 16 (1) (2001) pp.91-101.

130. M. Kunieda, T. Masuzawa, A fundamental study on a horizontal EDM, Ann. CIRP 37 (1) (1988) pp. 187-190.

131. T. Masuzawa, K. Okajima, T. Taguchi, EDM-lathe for micromachining, Ann. CIRP 51 (1) (2002) pp.355-358.

132. N. Mohri, J. Tsukamoto, M. Fujino, Drilling of deep micro holes by EDM, Ann. CIRP 38 (1) (1989) pp. 195-198.

133. T. Sato, T. Mizutani, K. Yonemochi, K. Kawata, The development of an electro discharge machine for micro-hole boring, Precision Eng. 8 (3) (1986) pp. 163-168.

134. J.S. Soni, Microanalysis of debris formed during rotary EDM of titanium alloy (Ti 6AI 4V) and die steel (T 215 Cr12), Wear 177 (1994) pp.71-79.

135. J.S. Soni, G. Chakraverti, Machining characteristics of titanium with rotary electro-discharge machining. Wear 171 (1994) pp. 51-58.

136. S. Enache, Dynamic stability of the technological machining system in EDM, Ann. CIRP 42 (1) (1993) pp. 209-214.

137. X.M. Ding, J.Y.H. Fuh, K.S. Lee, Y.F. Zhang, A.Y.C. Nee, A computer-aided EDM electrode design system for mold manufacturing. Int. J. Prod. Res. 38 (13) (2000) pp. 3079-3092.

138. J.P. Kruth, J. Peters, Steps towards an integrated CAD/CAM system for mould design and manufacture: anisotropic shrinkage, component library and link to NC machining and EDM, Ann. CIRP 35(1) (1986) pp.83-88.

215

139. Lauwers, J.P. Kruth, Computer-aided process planning for EDM operations. J. Manuf. Syst. 13 (5) (1994) pp. 313-322.

140. S.H. Yeo, A.K. New, A method for green process planning in electric discharge machining, Int. J. Adv. Manuf. Technol. 15 (4) (1999) pp. 287-291.

141. M.F. DeVries, N.A. Duffie, J.P. Kruth, D.F. Dauw, B. Schumacher, Integration of EDM within a CIM environment, Ann CIRP 39 (2) (1990) pp. 665-672.

142. F.E.H. Tay, E.A. Haider, The potential of plating techniques in the development of rapid EDM tooling. Int. J. Adv. Manuf. Technol. 18 (12) (2001) pp. 892-896.

143. Yang, M.C. Leu, Integration of rapid prototyping and electroforming for tooling applications, Ann. CIRP 48 (1) (1999) pp.119-122.

144. Arthur, P.M. Dickens, The measurement of heat distribution in stereolithography electrodes during electro-discharge machining. Int. J. Prod. Res. 36 (9) (1998) pp. 2451-2461.

145. H. Durr, R. Pilz, N.S. Eleser, Rapid tooling of EDM electrodes by means of selective laser sintering, Comput. Ind. 39 (1999) 35-45.

146. S.M. Pandit, T.M. Mueller, Verification of on-line computer control of EDM by data dependent systems, J. Eng. Ind. 109 (1987) 109-121.

147. G. Semon, A Practical Guide to Electro-discharge Machining, second ed.. Ateliers des Charmilles, Geneva, 1975 pp. 63-76.

148. D.R. Stovicek, The state-of-the-art EDM science, in: Tooling and Production, Nelson Publishing Inc., Ohio, US, 59(2) (1993), p. 42.

149. Taylan, L. Blaine, Y.C. Yen, Manufacturing of dies and molds, Ann. CIRP 50 (2) (2001) pp. 405-423.

150. Haas R (1992) An Innovative State of EDM Die-sinking into future. Proceeding of ISEM X: pp. 106-111

151. All Ozgedik, Can Cogun (2006) An experimental investigation of tool wear in EDM. Int J Adv Manuf Technol 27: pp. 488-500

152. Kruth JP, Lauwers B, Clappaert W (1992) A study of EDM pocketing. ISEM 10, Magdeburg, Germany: pp. 121-135

216

153. Rajurkar KP, Narasimhan J, Yu Z (2004) Tool Wear Compensation and Path Generation in Micro and Macro EDM. Transactions of NAMRI/SME. Vol. 32, UNC Charlotte

154. Wang CC, Yan BH (2000) Blind hole drilling of AI2O3/6061AI composite using rotary EDM. Journal of Material Processing Technology 102: pp. 90-102

155. Lin CL, Lin JL, Ko TC(2002) Optimization of the EDM process based on the orthogonal array with fuzzy logic and grey relational analysis method. Int J Adv Manuf Technol 19 (4): pp. 271-277

156. Kleljnen, JPC (1987) Statistical tools for simulation practitioners. New Yori<: Marcel Dekker

157. Kleijnen, JPC, Sargent RG (2000) A methodology for fitting and validating metamodels in simulation. European Journal of Operational Research 120: pp. 14-29

158. Myers Raymond H, Montgomery DC (2002) Response Surface Methodology: Process and product optimization using designed experiment. A Wiley-Inter science Publication

159. Cochran WG, Cox GM (1992) Experimental Designs. John Wiley and Sons, New York

160. Montgomery DC (2004) Design and Analysis of Experiments. Fifth Edition, John Wiley and Sons, New York

161. Karthikeyan R, Lakshmi Narayan PR, Naagarazan RS (1999) Mathematical modeling for electric discharge machining of aluminum-silicon carbide particulate composites, J Mater Process Technol 87: pp. 59-63

162. Minitab Inc (2006) Minitab user manual version 13, Quality Plaza, 1829 Pine Hall Road, State College, PA 16801-3008, USA

163. C.F.J. Wu, M. Hamada, Experiments Planning, Analysis, and Parameter Design Optimization, 2000, (John Wiley & Sons, New Yori<).

164. Cogun C, Akaslan S (2002) The effect of machining parameters on tool electrode wear and machining performance in electric discharge machining. KSME Int J 16(1): pp. 46-59

165. Hewidy MS, El-Taweel TA, E!-Safty MF (2005) Modeling the machining parameters of wire electrical discharge machining of Inconel 601 using RSM. J Mater Process Technol 169: pp. 328-336

217

166. Lee SH, Li XP (2001) Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide. J Mater Process Technol 115: pp. 344-358

167. E.I. Shobert (1983) What happens in EDM, in: E.G. Jameson (Ed.). Electrical Discharge Machining: Tooling, Methods and Applications, Society of Manufacturing Engineers, Dearbern, Michigan, pp. 3-4.

168. Chen Y, Mahdavian SM (1999) Parametric study into erosion wear in a computer numerical controlled electro-discharge machining process. Wear 236: pp. 350-354

.»*>.*>.*>.

218