References on applications of DIC toexperimental solid mechanics

Jean-Jose OrteuEcole des Mines d’Albi-Carmaux, Campus Jarlard, 81013 Albi, FRANCE

Jean-Jose.Orteu@enstimac.fr

April 4, 2009

Journals

[1] J. Abanto-Bueno and J. Lambros. Investigation of crack growth in func-tionally graded materials using digital image correlation. EngineeringFracture Mechanics, 69(14):1695–1711, September 2002.

[2] J. Abanto-Bueno and J. Lambros. Mechanical and fracture behaviorof an artificially ultraviolet-irradiated poly(ethylene-carbon monoxide)copolymer. Journal of Applied Polymer Science, 92(1):139–148, April2004.

[3] J. Abanto-Bueno and J. Lambros. Experimental determination of co-hesive failure properties of a photodegradable copolymer. ExperimentalMechanics, 45(2):144–152, April 2005.

[4] J. Abanto-Bueno and J. Lambros. An Experimental Study of MixedMode Crack Initiation and Growth in Functionally Graded Materials.Experimental Mechanics, 46(2):179–196, April 2006.

[5] Jorge Abanto-Bueno and John Lambros. Parameters controlling frac-ture resistance in functionally graded materials under mode I loading.International Journal of Solids and Structures, 43(13):3920–3939, June2006.

[6] M. Abbadi, F. de Haan, and P. Hahner. Tensile strain measurementusing mechanical and in situ optical techniques in bi-metallic Ni-basesuperalloys. Measurement, 40(4):383–391, May 2007.

1

[7] H. Ait-Amokhtar, P. Vacher, and S. Boudrahem. Kinematics fieldsand spatial activity of Portevin-Le Chatelier bands using the digital im-age correlation method. Acta Materialia, 54(16):4365–4371, September2006.

[8] Mohamad Ali-Ahmad, Kolluru Subramaniam, and Michel Ghosn.Experimental Investigation and Fracture Analysis of Debonding be-tween Concrete and FRP Sheets. Journal of Engineering Mechanics,132(9):914–923, 2006.

[9] R. Ambu, F. Aymerich, and F. Bertolino. Investigation of the effect ofdamage on the strength of notched composite laminates by digital im-age correlation. The Journal of Strain Analysis for Engineering Design,40(5):451–462, July 2005.

[10] Damodar R. Ambur, Navin Jaunky, and Mark W. Hilburger. Pro-gressive failure studies of stiffened panels subjected to shear loading.Composite Structures, 65(2):129–142, August 2004.

[11] F. Amiot, F. Hild, and J.-P. Roger. Mesure de champs de deplacementmicrometrique d’une surface par correlation de sa topographie. Instru-mentation, Mesure, Metrologie, 5(1-2):33–43, 2005.

[12] F. Amiot, F. Hild, and J.-P. Roger. Identification of elastic propertyand loading fields from full-field displacement measurements. Interna-tional Journal of Solids and Structures, 44:2863–2887, 2007.

[13] D. Amodio, G. B. Broggiato, F. Campana, and G. M. Newaz. Digitalspeckle correlation for strain measurement by image analysis. Experi-mental Mechanics, 43(4):396–402, December 2003.

[14] E. Amsterdam, J. T. M. De Hosson, and P. R. Onck. Failure mecha-nisms of closed-cell aluminum foam under monotonic and cyclic load-ing. Acta Materialia, 54(17):4465–4472, October 2006.

[15] E. Amsterdam, P. R. Onck, and J. T. M. De Hosson. Fracture and mi-crostructure of open cell aluminum foam. Journal of Materials Science,40(22):5813–5819, November 2005.

[16] H. M. Andersson, T. S. Lundstrom, B. R. Gebart, and P. Synnergren.Application of digital speckle photography to measure thickness varia-tions in the vacuum infusion process. Polymer Composites, 24(3):448–455, June 2003.

2

[17] N. P. Andrianopoulos. Full-Field Displacement Measurement of aSpeckle Grid by using a Mesh-Free Deformation Function. Strain,42(4):265–271, November 2006.

[18] Antonia Antoniou, P. R. Onck, and Ashraf F. Bastawros. Experimentalanalysis of compressive notch strengthening in closed-cell aluminumalloy foam. Acta Materialia, 52(8):2377–2386, May 2004.

[19] A. Asundi and H. North. White-light speckle method-current trends.Optics and Lasers in Engineering, 29(2):159–169, March 1998.

[20] L. Babout, J. Quinta da Fonseca, and Michael Preuss. Local StrainImaging during Mechanical Loading of Lamellar Microstructures in Ti-tanium Based alloys. Applied Mechanics and Materials, 1-2:159–164,2004.

[21] D. Backman, A. Jodoin, C. Poon, and Y. Mendis. The Use of DigitalImage Correlation to Verify the Behavior of Fiber Metal LaminateCylinders under Torsional Loading. Journal of ASTM International,3(5), May 2006.

[22] N. Bahlouli, S. Mguil-Touchal, S. Ahzi, and M. Laberge. Stress-StrainResponse of Biomaterials by a Digital Image Correlation Method: Ap-plication to Tecoflex. Journal of Materials Science & Technology,20:114–116, 2004.

[23] F. Barthelat, Z. Wu, B. C. Prorok, and H. D. Espinosa. Dynamic tor-sion testing of nanocrystalline coatings using high-speed photographyand digital image correlation. Experimental Mechanics, 43(3):331–340,September 2003.

[24] A.-F. Bastawros, H. Bart-Smith, and A. G. Evans. Experimental anal-ysis of deformation mechanisms in a closed-cell aluminum alloy foam.Journal of the Mechanics and Physics of Solids, 48(2):301–322, Febru-ary 2000.

[25] A.-F. Bastawros and A. G. Evans. Deformation Heterogeneity in Cel-lular Al Alloys. Advanced Engineering Materials, 2(4):210–214, April2000.

[26] T. A. Berfield, J. K. Patel, R. G. Shimmin, P. V. Braun, J. Lambros,and N. R. Sottos. Micro- and Nanoscale Deformation Measurement ofSurface and Internal Planes via Digital Image Correlation. Experimen-tal Mechanics, 47(1):51–62, February 2007.

3

[27] S. Bergonnier, F. Hild, J.-B. Rieunier, and S. Roux. Strain hetero-geneities and local anisotropy in crimped glass wool. Journal of Mate-rials Science, 40(22):5949–5954, November 2005.

[28] S. Bergonnier, F. Hild, and S. Roux. Analyse d’une cinematique sta-tionnaire heterogene. Revue des Composites et des Materiaux Avances,13(1):293–302, 2003.

[29] S. Bergonnier, F. Hild, and S. Roux. Digital image correlation used formechanical tests on crimped glass wool samples. The Journal of StrainAnalysis for Engineering Design, 40(2):185–197, February 2005.

[30] S. Bergonnier, F. Hild, and S. Roux. Localisation de la deformation parcorrelation d’images numeriques sur laine de verre crepee. Mecanique& Industries, 7:383–391, 2006.

[31] G. Besnard, F. Hild, and S. Roux. Finite-Element Displacement FieldsAnalysis from Digital Images: Application to Portevin-Le ChatelierBands. Experimental Mechanics, 46(6):789–803, December 2006.

[32] A. R. Bhandari and J. Indue. Experimental Study of Strain RatesEffects on Strain Localization Characteristics of Soft Rocks. Soils andFoundations, 45(1):125–140, 2005.

[33] Dinkar N. Bhat and Shree K. Nayar. Ordinal Measures for ImageCorrespondence. IEEE Transactions on Pattern Analysis and MachineIntelligence, 20(4):415–423, April 1998.

[34] B. Birgisson, A. Montepara, E. Romeo, R. Roncella, J. A. L. Napier,and G. Tebaldi. Determination and prediction of crack patterns inhot mix asphalt (HMA) mixtures. Engineering Fracture Mechanics,75(3-4):664–673, February-March 2008.

[35] Bjorn Birgisson, Antonio Montepara, John Napier, Elena Romeo, Ric-cardo Roncella, and Gabriele Tebaldi. Micromechanical Analyses forMeasurement and Prediction of Hot-Mix Asphalt Fracture Energy.Transportation Research Record, 1970:186–195, 2006.

[36] C. Bisagni and C. Walters. Experimental investigation of the damagepropagation in composite specimens under biaxial loading. CompositeStructures, in press, 2008.

[37] M. Bornert, F. Bremand, P. Doumalin, J.-C. Dupre, M. Fazzini,M. Grediac, F. Hild, S. Mistou, J. Molimard, J.-J. Orteu, L. Robert,

4

Y. Surrel, P. Vacher, and B. Wattrisse. Assessment of Digital ImageCorrelation measurement errors: methodology and results. Experimen-tal Mechanics, in press, 2009.

[38] B. L. Boyce, P. L. Reu, and C. V. Robino. The Constitutive Behaviorof Laser Welds in 304L Stainless Steel Determined by Digital ImageCorrelation. Metallurgical and Materials Transactions A, 37(8):2481–2492, August 2006.

[39] T. Bretheau, J. Crepin, P. Doumalin, and M. Bornert. Microextensom-etry: a tool for the mechanics of materials. La Revue de Metallurgie,5:567–575, May 2003.

[40] J. Brillaud and F. Lagattu. Limits and Possibilities of Laser Speckle andWhite-Light Image-Correlation Methods: Theory and Experiments.Applied Optics, 41(31):6603–6613, November 2002.

[41] Giovanni B. Broggiato, Golam M. Newaz, and Dario Amodio. Appli-cation of Digital Speckle Correlation for Strain Measurement in Com-posites. Key Engineering Materials, 221-222:337–346, 2002.

[42] H. A. Bruck, G. Fowler, S. K. Gupta, and T. M. Valentine. Using geo-metric complexity to enhance the interfacial strength of heterogeneousstructures fabricated in a multi-stage, multi-piece molding process. Ex-perimental Mechanics, 44(3):261–271, June 2004.

[43] H. A. Bruck, S. R. McNeill, M. A. Sutton, and W. H. Peters. Digitalimage correlation using Newton-Raphson method of partial differentialcorrection. Experimental Mechanics, 29(3):261–267, September 1989.

[44] H. A. Bruck, C. L. Moore, and T. L. Valentine. Repeatable bendingactuation in polyurethanes using opposing embedded one-way shapememory alloy wires exhibiting large deformation recovery. Smart Ma-terials and Structures, 11(4):509–518, August 2002.

[45] H. A. Bruck, C. L. Moore, and T. M. Valentine. Bending actua-tion in polyurethanes with a symmetrically graded distribution of one-way shape memory alloy wires. Experimental Mechanics, 44(1):62–70,February 2004.

[46] M. Brunet, F. Morestin, and H. Walter. Damage Identification forAnisotropic Sheet-Metals Using a Non-Local Damage Model. Interna-tional Journal of Damage Mechanics, 13(1):35–57, January 2004.

5

[47] Yifang Cao, Randy Bly, Will Moore, Zhan Gao, Alberto Cuitino, andWole Soboyejo. On the measurement of human osteosarcoma cell elasticmodulus using shear assay experiments. Journal of Materials Science:Materials in Medicine, 18(1):103–109, January 2007.

[48] N. Chahine, G. Ateshian, and C. Hung. The effect of finite compressivestrain on chondrocyte viability in statically loaded bovine articularcartilage. Biomechanics and Modeling in Mechanobiology, 6(1-2):103–111, January 2007.

[49] S. Chang, C. S. Wang, C. Y. Xiong, and J. Fang. Nanoscale in-planedisplacement evaluation by AFM scanning and digital image correla-tion processing. Nanotechnology, 16(4):344–349, April 2005.

[50] Y. J. Chao and M. A. Sutton. Measurement of Strains in a Paper Ten-sile Specimen Using Computer Vision and Digital Image Correlation –Part 2: Tensile Specimen Test. Tappi Journal, 70(4):153–156, 1988.

[51] I. Chasiotis. Mechanics of thin films and microdevices. IEEE Trans-actions on Device and Materials Reliability, 4(2):176–188, June 2004.

[52] Ioannis Chasiotis and Wolfgang G. Knauss. A new microtensile testerfor the study of MEMS materials with the aid of atomic force mi-croscopy. Experimental Mechanics, 42(1):51–57, March 2002.

[53] Ghassan R. Chehab, Youngguk Seo, and Y. Richard Kim. Viscoelasto-plastic Damage Characterization of Asphalt-Aggregate Mixtures Us-ing Digital Image Correlation. International Journal of Geomechanics,7(2):111–118, 2007.

[54] Jin-Long Chen, Quan Yu Liu, Yu Wen Qin, and Xin Hua Ji. Two-StepsDigital Image Correlation and Application to Studies of Micromechan-ics Behavior of Coating Interface. Key Engineering Materials, 336-338:1810–1813, 2007.

[55] Jin-Long Chen, Ganmin Xia, Kebin Zhou, Guisuo Xia, and YuwenQin. Two-step digital image correlation for micro-region measurement.Optics and Lasers in Engineering, 43(8):836–846, August 2005.

[56] T. Y. Chen, I. T. Huang, and B. H. Chen. Micro-Deformation Mea-surement on a Specular Surface by DIC with Nanoparticles. Key En-gineering Materials, 326-328:261–264, 2006.

6

[57] Peng Cheng, Michael A. Sutton, Hubert W. Schreier, and Stephen R.McNeill. Full-field speckle pattern image correlation with B-Spline de-formation function. Experimental Mechanics, 42(3):344–352, Septem-ber 2002.

[58] Tao Cheng, Chenkai Dai, and Rong Gan. Viscoelastic Propertiesof Human Tympanic Membrane. Annals of Biomedical Engineering,35(2):305–314, February 2007.

[59] Yi-Wen Cheng, David T. Read, J. David McColskey, and Joyce E.Wright. A tensile-testing technique for micrometer-sized free-standingthin films. Thin Solid Films, 484(1-2):426–432, July 2005.

[60] L. Chevalier, S. Calloch, F. Hild, and Y. Marco. Digital image corre-lation used to analyze the multiaxial behavior of rubber-like materials.European Journal of Mechanics - A/Solids, 20:169–187, 2001.

[61] L. Chevalier and Y. Marco. Tools for multiaxial validation of behav-ior laws chosen for modeling hyper-elasticity of rubber-like materials.Polymer Engineering & Science, 42(2):280–298, 2002.

[62] S. W. Cho and I. Chasiotis. Elastic Properties and RepresentativeVolume Element of Polycrystalline Silicon for MEMS. ExperimentalMechanics, 47(1):37–49, February 2007.

[63] S. W. Cho, K. Jonnalagadda, and I. Chasiotis. Mode I and mixed modefracture of polysilicon for MEMS. Fatigue & Fracture of EngineeringMaterials & Structures, 30(1):21–31, January 2007.

[64] Sungwoo Cho, Jaime F. Cardenas-Garcia, and Ioannis Chasiotis. Mea-surement of nanodisplacements and elastic properties of MEMS viathe microscopic hole method. Sensors and Actuators A: Physical,120(1):163–171, April 2005.

[65] Sungwoo Cho, Ioannis Chasiotis, Thomas A. Friedmann, and John P.Sullivan. Young’s modulus, Poisson’s ratio and failure properties oftetrahedral amorphous diamond-like carbon for MEMS devices. Jour-nal of Micromechanics and Microengineering, 15(4):728–735, April2005.

[66] S. Choi and S. P. Shah. Measurement of deformations on concretesubjected to compression using image correlation. Experimental Me-chanics, 37(3):307–313, September 1997.

7

[67] Sokhwan Choi and Surendra P. Shah. Fracture Mechanism in Cement-Based Materials Subjected to Compression. Journal of EngineeringMechanics, 124(1):94–102, January 1998.

[68] Yangwook Choi, Mark E. Walter, June K. Lee, and Chung-Souk Han.Observations of anisotropy evolution and identification of plastic spinparameters by uniaxial tensile tests. Journal of Mechanics of Materialsand Structures, 1(2):303–325, February 2006.

[69] T. C. Chu, W. F. Ranson, M. A. Sutton, and W. H. Peters. Appli-cations of Digital-Image-Correlation Techniques to Experimental Me-chanics. Experimental Mechanics, 25(3):232–244, 1985.

[70] S. F. Chuang, T. Y. Chen, and C. H. Chang. Application of Digital Im-age Correlation Method to Study Dental Composite Shrinkage. Strain,44(3):231–238, June 2008.

[71] D. Claire, F. Hild, and S. Roux. Identification of Damage Fields usingKinematic Measurements. Comptes Rendus Mecanique, 330(11):729–734, November 2002.

[72] D. Claire, F. Hild, and S. Roux. A finite element formulation to identifydamage fields: the equilibrium gap method. International Journal forNumerical Methods in Engineering, 61(2):189–208, September 2004.

[73] D. Claire, F. Hild, and S. Roux. Identification of a Damage Law byUsing Full-Field Displacement Measurements. International Journalof Damage Mechanics, 16(2):179–197, April 2007.

[74] D. Claire, S. Roux, and F. Hild. Identification de conductivites ther-miques et de proprietes elastiques locales par analyse de champs.Mecanique & Industries, 4:655–665, 2003.

[75] D. Coburn and J. A. Slevin. Development of a Digital Speckle Corre-lation System for Use in the Non-Destructive Testing of Advanced En-gineering Ceramics. Key Engineering Materials, 86-87:237–244, 1993.

[76] S. A. Collette, M. A. Sutton, P. Miney, A. P. Reynolds, Xiaodong Li,P. E. Colavita, W. A. Scrivens, Y. Luo, T. Sudarshan, P. Muzykov, andM. L. Myrick. Development of patterns for nanoscale strain measure-ments: I. Fabrication of imprinted Au webs for polymeric materials.Nanotechnology, 15(12):1812–1817, December 2004.

8

[77] David Corr, Matteo Accardi, Lori Graham-Brady, and Surendra Shah.Digital image correlation analysis of interfacial debonding propertiesand fracture behavior in concrete. Engineering Fracture Mechanics,74(1-2):109–121, January 2007.

[78] H.-A. Crostack, G. Fischer, E. Soppa, S. Schmauder, and Y.-L. Liu.Localization of strain in metal matrix composites studied by a scan-ning electron microscope-based grating method. Journal of Microscopy,201(2):171–178, February 2001.

[79] J. Cugnoni, J. Botsis, V. Sivasubramaniam, and J. Janczak-Rusch.Experimental and numerical studies on size and constraining effects inlead-free solder joints. Fatigue & Fracture of Engineering Materials &Structures, 30(5):387–399, May 2007.

[80] J. Quinta da Fonseca, M. Preuss, P. Ryan, and P. J. Withers. Mechani-cal Property Mapping Using Image Correlation and Electronic SpeckleInterferometry. Applied Mechanics and Materials, 1-2:147–152, 2004.

[81] Jian Jun Dai, Xi Dong Liang, Xue Feng Yao, and H. Y. Yeh. Studyof Cracked Unidirectional Glass Fiber-reinforced Composites by Dig-ital Speckle Correlation Method. Journal of Reinforced Plastics andComposites, 24(16):1737–1746, November 2005.

[82] Xing Dai, Yan Cheong Chan, and Alex Chun Kwan So. Digital SpeckleCorrelation Method Based on Wavelet-Packet Noise-Reduction Pro-cessing. Applied Optics, 38(16):3474–3482, June 1999.

[83] Y. Z. Dai, C. J. Tay, and F. P. Chiang. Determination of the plasticzone by laser-speckle correlation. Experimental Mechanics, 31(4):348–352, December 1991.

[84] S. Daly, A. Miller, G. Ravichandran, and K. Bhattacharya. An exper-imental investigation of crack initiation in thin sheets of nitinol. ActaMaterialia, 55(18):6322–6330, October 2007.

[85] S. Daly, G. Ravichandran, and K. Bhattacharya. Stress-inducedmartensitic phase transformation in thin sheets of Nitinol. Acta Mate-rialia, 55(10):3593–3600, June 2007.

[86] D. S. Dawicke and M. A. Sutton. CTOA and crack-tunneling measure-ments in thin sheet 2024-T3 aluminum alloy. Experimental Mechanics,34(4):357–368, December 1994.

9

[87] Olivier De Almeida, Fabienne Lagattu, and Jean Brillaud. Analysis bya 3D DIC technique of volumetric deformation gradients: Applicationto polypropylene/EPR/talc composites. Composites Part A: AppliedScience and Manufacturing, in press, 2008.

[88] C. De Roover, J. Vantomme, J. Wastiels, and L. Taerwe. DeformationAnalysis of a Modular Connection System by Digital Image Correla-tion. Experimental Techniques, 26(6):37–40, November 2002.

[89] V. Doquet and S. Pommier. Fatigue crack growth under non-proportional mixed-mode loading in ferritic-pearlitic steel. Fatigue& Fracture of Engineering Materials & Structures, 27(11):1051–1060,November 2004.

[90] P. Doumalin, M. Bornert, and J. Crepin. Caracterisation dela repartition de la deformation dans les materiaux heterogenes.Mecanique & Industries, 4(6):607–617, November 2003.

[91] B. Durig, F. Zhang, S. R. McNeill, Y. J. Chao, and W. H. Peters.A study of mixed mode fracture by photoelasticity and digital imageanalysis. Optics and Lasers in Engineering, 14(3):203–215, 1991.

[92] I. Dutta, D. Pan, S. Ma, B. S. Majumdar, and S. Harris. Role of Shape-memory Alloy Reinforcements on Strain Evolution in Lead-free SolderJoints. Journal of Electronic Materials, 35(10):1902–1913, October2006.

[93] I. Elnasri, S. Pattofatto, H. Zhao, H. Tsitsiris, F. Hild, and Y. Girard.Shock enhancement of cellular structures under impact loading: PartI Experiments. J. Mech. Phys. Solids, 55:2652–2671, 2007.

[94] H. D. Espinosa, S. Berbenni, M. Panico, and K. W. Schwarz. Aninterpretation of size-scale plasticity in geometrically confined systems.Proceedings of the National Academy of Sciences of the United Statesof America, 102(47):16933–16938, November 2005.

[95] Qin-Zhi Fang, T. J. Wang, and Hui-Min Li. Large tensile deformationbehavior of PC/ABS alloy. Polymer, 47(14):5174–5181, June 2006.

[96] X. Fayolle, S. Calloch, and F. Hild. Controlling Testing Machineswith Digital Image Correlation. Experimental Techniques, 31(3):57–63, May/June 2007.

10

[97] X. Fayolle, S. Calloch, and F. Hild. Controler une machine d’essaiavec une camera. Mecanique & Industries, 9(5):447–458, Septembre-Octobre 2008.

[98] C. Feichter, Z. Major, and R. W. Lang. Deformation Analysis ofNotched Rubber Specimens. Strain, 42(4):299–304, November 2006.

[99] Reinhard Feiel and Philip Wilksch. High-Resolution Laser Speckle Cor-relation for Displacement and Strain Measurement. Applied Optics,39(1):54–60, January 2000.

[100] Alexander D. Fergusson, A. Puri, Andy Morris, and J. P. Dear. Flex-ural Testing of Composite Sandwich Structures with Digital SpecklePhotogrammetry. Applied Mechanics and Materials, 5-6:135–143, 2006.

[101] Richard J. Finno and Amy L. Rechenmacher. Effects of Consolida-tion History on Critical State of Sand. Journal of Geotechnical andGeoenvironmental Engineering, 129(4):350–360, April 2003.

[102] C. Forno. White-light speckle photography for measuring deformation,strain, and shape. Optics & Laser Technology, 7(5):217–221, October1975.

[103] P. Forquin and F. Hild. Fissuration quasi statique et dynamique deceramiques SiC - utilisation d’une technique de correlation d’images.Revue des Composites et des Materiaux Avances, 17(1):37–54, 2007.

[104] Pascal Forquin, Laurent Rota, Yann Charles, and Francois Hild. Amethod to determine the macroscopic toughness scatter of brittle mate-rials. International Journal of Fracture, 125(1):171–187, January 2004.

[105] M. Fouinneteau and A. K. Pickett. Failure Characterisation of HeavyTow Braided Composites Using Digital Image Correlation (DIC). Ap-plied Mechanics and Materials, 5-6:399–406, 2006.

[106] M. R. C. Fouinneteau and A. K. Pickett. Shear mechanism modelling ofheavy tow braided composites using a meso-mechanical damage model.Composites Part A: Applied Science and Manufacturing, 38(11):2294–2306, November 2007.

[107] Thomas Fricke-Begemann. Three-Dimensional Deformation FieldMeasurement with Digital Speckle Correlation. Applied Optics,42(34):6783–6796, December 2003.

11

[108] Y. Fu, X. H. Ji, and Y. W. Qin. Experimental Study of Micro Dis-placement Field of Microstate of Crack Tips of Ceramics Plasticizedwith Zirconia and Stabilized by Yttrium Oxide – Application of Digi-tal Image Correlation Method Based on Analysis by Scanning ElectronMicroscope. Key Engineering Materials, 336-338(3):2436–2439, 2007.

[109] M. Fujikawa and M. Takashi. An experimental and numerical hybridtechnique for reconstructing boundary conditions in elastic analysis.The Journal of Strain Analysis for Engineering Design, 42(1):47–54,January 2007.

[110] Jianxin Gao, Wei Xu, and Jianping Geng. 3D shape reconstructionof teeth by shadow speckle correlation method. Optics and Lasers inEngineering, 44(5):455–465, May 2006.

[111] M. G. D. Geers, R. de Borst, and T. Peijs. Mixed numerical-experimental identification of non-local characteristics of random-fibre-reinforced composites. Composites Science and Technology,59(10):1569–1578, August 1999.

[112] C. Genevois, A. Deschamps, A. Denquin, and B. Doisneau-cottignies.Quantitative investigation of precipitation and mechanical behaviourfor AA2024 friction stir welds. Acta Materialia, 53(8):2447–2458, May2005.

[113] C. Genevois, A. Deschamps, and P. Vacher. Comparative study onlocal and global mechanical properties of 2024 T351, 2024 T6 and 5251O friction stir welds. Materials Science and Engineering: A, 415(1-2):162–170, January 2006.

[114] A. L. Gershon, L. S. Gyger Jr., H. A. Bruck, and S. K. Gupta. Ther-moplastic Polymer Shrinkage in Emerging Molding Processes. Experi-mental Mechanics, in press, 2008.

[115] G. Geymonat, F. Hild, and S. Pagano. Identification of elastic param-eters by displacement field measurement. Comptes Rendus Mecanique,330(6):403–408, 2002.

[116] G. Geymonat and S. Pagano. Identification of Mechanical Properties byDisplacement Field Measurement: A Variational Approach. Meccanica,38(5):535–545, October 2003.

12

[117] M. Giton, A.-S. Caro-Bretelle, and P. Ienny. Hyperelastic BehaviourIdentification by a Forward Problem Resolution: Application to a TearTest of a Silicone-Rubber. Strain, 42(4):291–297, November 2006.

[118] A. Godara and D. Raabe. Influence of fiber orientation on global me-chanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformationinvestigated using digital image correlation. Composites Science andTechnology, 67(11-12):2417–2427, September 2007.

[119] A. Godara, D. Raabe, I. Bergmann, R. Putz, and U. Muller. Influenceof additives on the global mechanical behavior and the microscopicstrain localization in wood reinforced polypropylene composites duringtensile deformation investigated using digital image correlation. Com-posites Science and Technology, in press, 2009.

[120] Jason Y. L. Goh, Mark C. Pitter, Chung W. See, Michael G. Somekh,and Daniel Vanderstraeten. Sub-pixel image correlation: an alternativeto SAM and dye penetrant for crack detection and mechanical stresslocalisation in semiconductor. Microelectronics Reliability, 44(2):259–267, February 2004.

[121] A. M. Goijaerts, Y. W. Stegeman, L. E. Govaert, D. Brokken, W. A. M.Brekelmans, and F. P. T. Baaijens. Can a new experimental and numer-ical study improve metal blanking? Journal of Materials ProcessingTechnology, 103(1):44–50, June 2000.

[122] J. Gonzalez and W. G. Knauss. Strain inhomogeneity and discontinu-ous crack growth in a particulate composite. Journal of the Mechanicsand Physics of Solids, 46(10):1981–1995, October 1998.

[123] S. G. Grantham, C. R. Siviour, W. G. Proud, and J. E. Field. High-strain rate Brazilian testing of an explosive simulant using specklemetrology. Measurement Science and Technology, 15(9):1867–1870,September 2004.

[124] Per Gren. Pulsed TV Holography Combined with Digital SpecklePhotography Restores Lost Interference Phase. Applied Optics,40(14):2304–2309, May 2001.

[125] Jin Guanchang, Wu Zhen, Bao Nikeng, and Yao Xuefeng. Digitalspeckle correlation method with compensation technique for strain fieldmeasurements. Optics and Lasers in Engineering, 39(4):457–464, April2003.

13

[126] Li-Ping Guo, Wei Sun, Xiao-Yuan He, and Zhen-Bin Xu. Applica-tion of DSCM in prediction of potential fatigue crack path on concretesurface. Engineering Fracture Mechanics, 75(3-4):643–651, February-March 2008.

[127] Z. Q. Guo, H. M. Xie, B. C. Liu, B. Pan, P. W. Chen, Q. M. Zhang,and F. L. Huang. Digital Image Correlation Study on Micro-Crystalof Poly-crystal Aluminum Specimen under Tensile Load through SEM.Key Engineering Materials, 326-328:155–158, 2006.

[128] M. Gutierrez and I. Vardoulakis. Energy dissipation and post-bifurcation behaviour of granular soils. International Journal forNumerical and Analytical Methods in Geomechanics, 31(3):435–455,March 2007.

[129] K. Ha and R. A. Schapery. A three-dimensional viscoelastic constitu-tive model for particulate composites with growing damage and its ex-perimental validation. International Journal of Solids and Structures,35(26):3497–3517, 1998.

[130] H. Haddadi and S. Belhabib. Use of rigid-body motion for the investiga-tion and estimation of the measurement errors related to digital imagecorrelation technique. Optics and Lasers in Engineering, 46(2):185–196, February 2008.

[131] Herdawandi Halim, David S. Wilkinson, and Marek Niewczas. ThePortevin-Le Chatelier (PLC) effect and shear band formation in anAA5754 alloy. Acta Materialia, 55(12):4151–4160, July 2007.

[132] R. Hamam, F. Hild, and S. Roux. Stress intensity factor gauging by dig-ital image correlation: Application in cyclic fatigue. Strain, 43(3):181–192, August 2007.

[133] G. Han, M. A. Sutton, and Y. J. Chao. A study of stationary crack-tip deformation fields in thin sheets by computer vision. ExperimentalMechanics, 34(2):125–140, June 1994.

[134] J. Han and T. Siegmund. A combined experimental-numerical inves-tigation of crack growth in a carbon/carbon composite. Fatigue &Fracture of Engineering Materials & Structures, 29(8):632–645, August2006.

14

[135] R. S. He, C. T. Horn, H. J. Wang, and S. F. Hwang. Deformation Mea-surement by a Digital Image Correlation Method Combined with a Hy-brid Genetic Algorithm. Key Engineering Materials, 326-328(1):139–142, 2006.

[136] X. Y. He, W. Sun, X. Zheng, and M. Nie. Static and Dynamic Deforma-tion Measurements of Micro Beams by the Technique of Digital ImageCorrelation. Key Engineering Materials, 326-328(1):211–214, 2006.

[137] J. D. Helm. Digital Image Correlation for Specimens with MultipleGrowing Cracks. Experimental Mechanics, 48(6):753–762, December2008.

[138] E. Heripre, M. Dexet, J. Crepin, L. Gelebart, A. Roos, M. Bornert,and D. Caldemaison. Coupling between experimental measurementsand polycrystal finite element calculations for micromechanical studyof metallic materials. International Journal of Plasticity, 23(9):1512–1539, September 2007.

[139] F. Hild, B. Raka, M. Baudequin, S. Roux, and F. Cantelaube. Multi-scale Displacement Field Measurements of Compressed Mineral-WoolSamples by Digital Image Correlation. Applied Optics, 41(32):6815–6828, November 2002.

[140] F. Hild and S. Roux. Digital Image Correlation: from DisplacementMeasurement to Identification of Elastic Properties – a Review. Strain,42(2):69–80, May 2006.

[141] F. Hild, S. Roux, R. Gras, N. Guerrero, M. E. Marante, and J. Florez-Lopez. Displacement measurement technique for beam kinematics. Op-tics and Lasers in Engineering, in press, 2008.

[142] Francois Hild and Stephane Roux. Measuring stress intensity factorswith a camera: Integrated digital image correlation (I-DIC). ComptesRendus Mecanique, 334(1):8–12, January 2006.

[143] T. Hoc, L. Henry, M. Verdier, D. Aubry, L. Sedel, and A. Meunier.Effect of microstructure on the mechanical properties of Haversian cor-tical bone. Bone, 38(4):466–474, April 2006.

[144] P. Hof. Stress determination on glass by digital image correlation(DIC). IABSE Reports, 92:38–39, 2006.

15

[145] Zhende Hou and Yuwen Qin. The study of fractal correlation method inthe displacement measurement and its application. Optics and Lasersin Engineering, 39(4):465–472, April 2003.

[146] Tao Hua, Hui-Min Xie, Bing Pan, Xinlin Qing, Fu-Long Dai, andXiqiao Feng. A new micro-tensile system for measuring the mechani-cal properties of low-dimensional materials–fibers and films. PolymerTesting, 26(4):513–518, June 2007.

[147] Hseng-Ji Huang and Anthony M. Waas. Improved speckle method formeasuring in-plane displacement and strain fields. Optical Engineering,46(5):051005 (11 pages), May 2007.

[148] Po-Chih Hung and A. S. Voloshin. In-plane strain measurement bydigital image correlation. Journal of the Brazilian Society of MechanicalSciences and Engineering, 25(3):215–221, 2003.

[149] V. Huon, B. Wattrisse, M. S. El Youssoufi, and A. Chrysochoos. Elas-tic behavior of anisotropic terra cotta ceramics determined by kine-matic full-field measurements. Journal of the European Ceramic Soci-ety, 27(5):2303–2310, 2007.

[150] Vincent Huon, Olivier Maisonneuve, Bertrand Wattrisse, and Jean-Michel Muracciole. Mise en evidence par granularite en lumiereblanche de phenomenes de multilocalisation de la deformation pourles betons de poudres reactives sollicites en traction. Comptes Rendusde l’Academie des Sciences - Series IIB - Mechanics, 329(12):897–900,December 2001.

[151] C. Husson, N. Bahlouli, S. Mguil-Touchal, and S. Ahzi. Mechanicalcharacterization of thin metal sheets by a digital image correlationmethod. Journal de Physique IV, 12(11):393–400, 2002.

[152] S.-F. Hwang, J.-T. Horn, and H.-J. Wang. Strain Measurement ofNickel Thin Film by a Digital Image Correlation Method. Strain,44(3):215–222, June 2008.

[153] S.-F. Hwang, J.-T. Horn, and H.-J. Wang. Strain measurement ofSU-8 photoresist by a digital image correlation method with a hybridgenetic algorithm. Optics and Lasers in Engineering, 46(3):281–289,March 2008.

[154] M. Ikeda, M. Masuda, K. Murata, and S. Ukyo. Analysis of In-PlaneShear Behavior of Wood Based Panels by Digital Image Correlation.

16

Journal of the Society of Materials Science, Japan, 55(6):569–575,2006.

[155] C. Jacquemoud, K. Bruyere-Garnier, and M. Coret. Methodology todetermine failure characteristics of planar soft tissues using a dynamictensile test. Journal of Biomechanics, 40(2):468–475, 2007.

[156] P. J. Jacques, Q. Furnemont, F. Lani, T. Pardoen, and F. Delannay.Multiscale mechanics of TRIP-assisted multiphase steels: I. Charac-terization and mechanical testing. Acta Materialia, 55(11):3681–3693,June 2007.

[157] E. Jimenez-Pique, L. J. M. G. Dortmans, and G. De With. Frac-ture and crack profile fictitious crack modeling of porous poly(methylmethacrylate). Journal of Polymer Science Part B: Polymer Physics,41(10):1112–1122, May 2003.

[158] Helena Jin and Hugh A. Bruck. A new method for characterizing non-linearity in scanning probe microscopes using digital image correlation.Nanotechnology, 16(9):1849–1855, September 2005.

[159] Helena Jin, Wei-Yang Lu, Simon Scheffel, Terry D. Hinnerichs, andMichael K. Neilsen. Full-field characterization of mechanical behaviorof polyurethane foams. International Journal of Solids and Structures,44(21):6930–6944, October 2007.

[160] Huiqing Jin and Hugh A. Bruck. Pointwise Digital Image Correla-tion Using Genetic Algorithms. Experimental Techniques, 29(1):36–39,January 2005.

[161] Huiqing Jin and Hugh A. Bruck. Theoretical development for point-wise digital image correlation. Optical Engineering, 44(6):067003, June2005.

[162] Zhang Jue, Xiong Chun-Yang, Li Hongju, Li Ming, Wang Jianxiang,and Fang Jing. Damage and fracture evaluation of granular compositematerials by digital image correlation method. Acta Mechanica Sinica,20(4):408–417, August 2004.

[163] Zella L. Kahn-Jetter, Nand K. Jha, and Harmeet Bhatia. Optimalimage correlation in experimental mechanics. Optical Engineering,33(4):1099–1105, April 1994.

17

[164] C. Kanchanomaia, S. Yamamotoa, Y. Miyashitaa, Y. Mutoh, and A. J.McEvily. Low cycle fatigue test for solders using non-contact digital im-age measurement system. International Journal of Fatigue, 24(1):57–67, January 2002.

[165] J. Kang, M. Jain, D. S. Wilkinson, and J. D. Embury. MicroscopicStrain Mapping Using Scanning Electron Microscopy Topography Im-age Correlation at Large Strain. The Journal of Strain Analysis forEngineering Design, 40(6):559–570, 2005.

[166] J. Kang, D. S. Wilkinson, M. Jain, J. D. Embury, A. J. Beaudoin,S. Kim, R. Mishira, and A. K. Sachdev. On the sequence of inhomo-geneous deformation processes occurring during tensile deformation ofstrip cast AA5754. Acta Materialia, 54(1):209–218, January 2006.

[167] Jidong Kang, Yuriy Ososkov, J. David Embury, and David S. Wilkin-son. Digital image correlation studies for microscopic strain distribu-tion and damage in dual phase steels. Scripta Materialia, 56(11):999–1002, June 2007.

[168] N. R. Kay, S. Ghosh, I. Guven, and E. Madenci. A combined ex-perimental and analytical approach for interface fracture parametersof dissimilar materials in electronic packages. Materials Science andEngineering: A, 421(1-2):57–67, April 2006.

[169] J. Keller, A. Gollhardt, D. Vogel, E. Auerswald, N. Sabate,J. Auersperg, and B. Michel. FibDAC - Residual Stress Determinationby Combination of Focused Ion Beam Technique and Digital ImageCorrelation. Materials Science Forum, 524-525:121–128, 2006.

[170] Dong Hak Kim, Jeong Hyun Lee, Ho Dong Kim, and Ki Ju Kang. AnExperimental Measurement of Toughness Locus for a Ductile Material.Key Engineering Materials, 297-300:2410–2415, 2005.

[171] M. S. Kirugulige and H. V. Tippur. Measurement of Fracture Param-eters for a Mixed-Mode Crack Driven by Stress Waves using ImageCorrelation Technique and High-Speed Digital Photography. Strain, inpress, 2008.

[172] W. G. Knauss, I. Chasiotis, and Y. Huang. Mechanical measurementsat the micron and nanometer scales. Mechanics of Materials, 35(3-6):217–231, March 2003.

18

[173] W. G. Knauss and W. Zhu. Nonlinearly Viscoelastic Behavior ofPolycarbonate. I. Response under Pure Shear. Mechanics of Time-Dependent Materials, 6(3):231–269, 2002.

[174] Takeshi Kodaka, Yosuke Higo, Sayuri Kimoto, and Fusao Oka. Ef-fects of sample shape on the strain localization of water-saturated clay.International Journal for Numerical and Analytical Methods in Geome-chanics, 31(3):483–521, March 2007.

[175] Janne Koljonen and Jarmo T. Alander. Deformation image genera-tion for testing a strain measurement algorithm. Optical Engineering,47(10):107202 (13 pages), October 2008.

[176] M. Kuntz, M. Jolin, J. Bastien, F. Perez, and F. Hild. Digital imagecorrelation analysis of crack behaviour in a reinforced concrete beamduring a load test. Canadian Journal of Civil Engineering, 33:1418–1425, 2006.

[177] Jui-Chao Kuo, Delphic Chen, Shih-Heng Tung, and Ming-Hsiang Shih.Prediction of the orientation spread in an aluminum bicrystal duringplane strain compression using a dic-based taylor model. Computa-tional Materials Science, in press, 2008.

[178] F. Lagattu, M.-C. Lafarie-Frenot, T. Q. Lam, and J. Brillaud. Experi-mental characterisation of overstress accommodation in notched CFRPcomposite laminates. Composite Structures, 67(3):347–357, March2005.

[179] Fabienne Lagattu, Florent Bridier, Patrick Villechaise, and Jean Bril-laud. In-plane strain measurements on a microscopic scale by couplingdigital image correlation and an in situ SEM technique. MaterialsCharacterization, 56(1):10–18, January 2006.

[180] Fabienne Lagattu, Jean Brillaud, and Marie-Christine Lafarie-Frenot.High strain gradient measurements by using digital image correlationtechnique. Materials Characterization, 53(1):17–28, September 2004.

[181] Fabienne Lagattu, Jean Brillaud, and Marie-Christine Lafarie-Frenot.Erratum to ”High strain gradient measurements by using digital imagecorrelation technique” [Mater. Charact. 53 (2004) 17–28]”. MaterialsCharacterization, 54(4-5):479–480, May 2005.

19

[182] Fabienne Lagattu, Anne-Lise Gloanec, Gilbert Henaff, and Jean Bril-laud. Etude du role de la microstructure sur la resistance a la fissura-tion par fatigue des alliages TiAl a l’aide de la technique de correlationd’images numeriques de mouchetis. Mecanique & Industries, 6:499–507,2005.

[183] F. Laraba-Abbes, P. Ienny, and R. Piques. A new ’tailor-made’ method-ology for the mechanical behaviour analysis of rubber-like materials: I.Kinematics measurements using a digital speckle extensometry. Poly-mer, 44:807–820, 2003.

[184] J. S. Lawler, D. T. Keane, and S. P. Shah. Measuring Three-Dimensional Damage of Mortar in Compression with X-Ray Micro-tomography and Digital Image Correlation. ACI Special Publication,189:187–202, January 2000.

[185] John S. Lawler, Denis T. Keane, and Surendra P. Shah. MeasuringThree-Dimensional Damage in Concrete under Compression. ACI Ma-terials Journal, 98(6):465–475, November 2001.

[186] M. M. LeBlanc, J. N. Florando, D. H. Lassila, T. Schmidt, andJ. Tyson. Image Correlation Applied to Single Crystal Plasticity Exper-iments and Comparison to Strain Gage Data. Experimental Techniques,30(4):33–37, July/August 2006.

[187] D. Lecompte, A. Smits, S. Bossuyt, H. Sol, J. Vantomme,D. Van Hemelrijck, and A. M. Habraken. Quality assessment of specklepatterns for digital image correlation. Optics and Lasers in Engineer-ing, 44:1132–1145, 2006.

[188] David Lecompte, Arwen Smits, Hugo Sol, John Vantomme, and DannyVan Hemelrijck. Mixed numerical-experimental technique for or-thotropic parameter identification using biaxial tensile tests on cru-ciform specimens. International Journal of Solids and Structures,44(5):1643–1656, March 2007.

[189] J.-H. Lee, M.-C. Jeon, and K.-J. Kang. Evaluation of DisplacementMeasurement Technique Using Laser Speckle and Digital Image Corre-lation Method. Journal of the Korean Society of Precision Engineering,20(6):47–54, 2003.

[190] Sungsoo Lee, Francois Barthelat, Nicolaie Moldovan, Horacio D. Es-pinosa, and Haydn N. G. Wadley. Deformation rate effects on failure

20

modes of open-cell Al foams and textile cellular materials. InternationalJournal of Solids and Structures, 43(1):53–73, January 2006.

[191] D. Leveque, C. Huchette, P. Paulmier, F. Laurin, and J.-F. Maire.Displacement field measurements and capitalizing on experience: Ap-plication to the analysis of the rupture of holed composite plates. Com-posites Science and Technology, in press, 2008.

[192] E. B. Li, A. K. Tieu, and W. Y. D. Yuen. Application of digital imagecorrelation technique to dynamic measurement of the velocity field inthe deformation zone in cold rolling. Optics and Lasers in Engineering,39(4):479–488, April 2003.

[193] Jianming Li and Riyi Shi. Stretch-induced nerve conduction deficitsin guinea pig ex vivo nerve. Journal of Biomechanics, 40(3):569–578,2007.

[194] M. Li, J. Zhang, C. Y. Xiong, J. Fang, J. M. Li, and Y. Hao. Damageand fracture prediction of plastic-bonded explosive by digital imagecorrelation processing. Optics and Lasers in Engineering, 43(8):856–868, August 2005.

[195] N. Li, M. A. Sutton, X. Li, and H. W. Schreier. Full-field ThermalDeformation Measurements in a Scanning Electron Microscope by 2DDigital Image Correlation. Experimental Mechanics, in press, 2008.

[196] X. Li, W. Xu, M. A. Sutton, and M. Mello. In Situ Nanoscale In-PlaneDeformation Studies of Ultrathin Polymeric Films During Tensile De-formation Using Atomic Force Microscopy and Digital Image Corre-lation Techniques. IEEE Transactions on Nanotechnology, 6(1):4–12,January 2007.

[197] Xiaodong Li, Weijie Xu, M. A. Sutton, and M. Mello. Nanoscale de-formation and cracking studies of advanced metal evaporated magnetictapes using atomic force microscopy and digital image correlation tech-niques. Materials Science and Technology, 22(7):835–844, July 2006.

[198] Cheng Liu. On the minimum size of representative volume element:An experimental investigation. Experimental Mechanics, 45(3):238–243, June 2005.

[199] Jinyuan Liu and Magued Iskander. Adaptive Cross Correlation forImaging Displacements in Soils. Journal of Computing in Civil Engi-neering, 18(1):46–57, 2004.

21

[200] W. D. Lockwood and A. P. Reynolds. Simulation of the global responseof a friction stir weld using local constitutive behavior. Materials Sci-ence and Engineering: A, 339(1):35–42, January 2003.

[201] W. D. Lockwood, B. Tomaz, and A. P. Reynolds. Mechanical responseof friction stir welded AA2024: experiment and modeling. MaterialsScience and Engineering: A, 323(1):348–353, January 2002.

[202] Stepan V. Lomov, Dmitry S. Ivanov, Ignaas Verpoest, Masaru Zako,Tetsusei Kurashiki, Hiroaki Nakai, Jerome Molimard, and AlainVautrin. Full-field strain measurements for validation of meso-FE anal-ysis of textile composites. Composites Part A: Applied Science andManufacturing, in press, 2008.

[203] P. Lopez-Crespo, R. L. Burguete, E. A. Patterson, A. Shterenlikht,P. J. Withers, and J. R. Yates. Study of a Crack at a Fastener Holeby Digital Image Correlation. Experimental Mechanics, in press, 2009.

[204] Laurent Louis, Teng-Fong Wong, and Patrick Baud. Imaging strainlocalization by X-ray radiography and digital image correlation: De-formation bands in Rothbach sandstone. Journal of Structural Geology,29(1):129–140, January 2007.

[205] H. Lu and D. Cary. Deformation measurements by digital image cor-relation: Implementation of a second-order displacement gradient. Ex-perimental Mechanics, 40(4):393–400, December 2000.

[206] H. Lu, G. Vendroux, and W. G. Knauss. Surface deformation measure-ments of a cylindrical specimen by digital image correlation. Experi-mental Mechanics, 37(4):433–439, December 1997.

[207] H. Lu, X. Zhang, and W. G. Knauss. Uniaxial, shear, and poisson relax-ation and their conversion to bulk relaxation: Studies on poly(methylmethacrylate). Polymer Composites, 18(2):211–222, April 1997.

[208] H. Lu, X. Zhang, and W. G. Knauss. Uniaxial, shear, and poisson relax-ation and their conversion to bulk relaxation: Studies on poly(methylmethacrylate). Polymer Engineering & Science, 37(6):1053—1064,June 1997.

[209] H. Luo, H. Lu, and N. Leventis. The compressive behavior ofisocyanate-crosslinked silica aerogel at high strain rates. Mechanicsof Time-Dependent Materials, 10(2):83–111, June 2006.

22

[210] J. S. Lyons, J. Liu, and M. A. Sutton. High-temperature deformationmeasurements using digital-image correlation. Experimental Mechan-ics, 36(1):64–70, March 1996.

[211] S. P. Ma, L. G. Wang, and G. C. Jin. Damage Evolution Inspection ofRock Using Digital Speckle Correlation Method (DSCM). Key Engi-neering Materials, 326-328:1117–1120, 2006.

[212] K. Machida, K. Usui, Y. Sawa, and H. Okamura. Hybrid Stress Anal-ysis inside a Specimen under Mixed-Mode Loading by Speckle Photog-raphy. Key Engineering Materials, 243-244:153–158, 2003.

[213] Kenji Machida. Elastic-Plastic Stress Analyses by Digital Image Cor-relation and Nonlinear Hybrid Method. Applied Mechanics and Mate-rials, 3-4:39–46, 2005.

[214] Kenji Machida and Kazuhiro Okazaki. Improvement of the Accuracyof Infinitesimal Deformation of the Sub-Pixel Order by Digital ImageCorrelation. Key Engineering Materials, pages 1307–1310, 2007.

[215] Kenji Machida, Mitsuru Sato, and Shinji Ogihara. Application of StressAnalysis by Digital Image Correlation and Intelligent Hybrid Methodto Unidirectional CFRP Laminate. Key Engineering Materials, pages1121–1124, 2007.

[216] Kenji Machida and Yoshimasa Suzuki. Examination of Accuracy of theSingular Stress Field Near a Crack-Tip by Digital Image Correlation.Key Engineering Materials, 321-323:32–37, 2006.

[217] Kenji Machida and Hirohisa Yamada. Automatic Stress AnalyzingSystem by Digital Speckle Photography Using 2-D Hybrid Method.Key Engineering Materials, 270-273:800–807, 2004.

[218] Yann Marco, Luc Chevalier, and Mohend Chaouche. WAXD study ofinduced crystallization and orientation in poly(ethylene terephthalate)during biaxial elongation. Polymer, 43(24):6569–6574, November 2002.

[219] Manuel Marya, Louis G. Hector, Ravi Verma, and Wei Tong. Mi-crostructural effects of AZ31 magnesium alloy on its tensile deforma-tion and failure behaviors. Materials Science and Engineering: A,418(1-2):341–356, February 2006.

[220] M. A. Matin, J. G. A. Theeven, W. P. Vellinga, and M. G. D.Geers. Correlation between localized strain and damage in shear-loaded

23

Pb-free solders. Microelectronics Reliability, 47(8):1262–1272, August2007.

[221] S. R. McNeill, W. H. Peters, and M. A. Sutton. Estimation of stressintensity factor by digital image correlation. Engineering Fracture Me-chanics, 28(1):101–112, 1987.

[222] S. R. McNeill, M. A. Sutton, Z. Miao, and J. Ma. Measurement ofsurface profile using digital image correlation. Experimental Mechanics,37(1):13–20, March 1997.

[223] Waleed Mekky and Patrick S. Nicholson. Bridging-Stress Evaluation ina NiAl2O3 System via the Digital Image-Correlation Technique. Jour-nal of the American Ceramic Society, 89(3):1095–1098, March 2006.

[224] Waleed Mekky and Patrick S. Nicholson. The fracture toughness ofNi/Al2O3 laminates by digital image correlation I: Experimental crackopening displacement and R-curves. Engineering Fracture Mechanics,73(5):571–582, March 2006.

[225] Waleed Mekky and Patrick S. Nicholson. The fracture toughness ofNi/Al2O3 laminates by digital image correlation II: Bridging-stressesand R-curve models. Engineering Fracture Mechanics, 73(5):583–592,March 2006.

[226] Waleed Mekky and Patrick S. Nicholson. Modeling constrained metalbehavior in ceramic/metal laminates. Composites Part B: Engineering,in press, 2008.

[227] L. B. Meng, G. C. Jin, and X. F. Yao. Application of iteration and fi-nite element smoothing technique for displacement and strain measure-ment of digital speckle correlation. Optics and Lasers in Engineering,45(1):57–63, January 2007.

[228] K. Miyauchi, M. Masuda, and K. Murata. Analysis of Strain Dis-tributions of Wooden Dovetail Joints Using Digital Image CorrelationMethod. Journal of the Society of Materials Science, Japan, 55(4):367–372, 2006.

[229] G. P. Mogadpalli and V. Parameswaran. Determination of Stress In-tensity Factor for Cracks in Orthotropic Composite Materials usingDigital Image Correlation. Strain, 44(6):446–452, 2008.

24

[230] D. Mohr and M. Oswald. A New Experimental Technique for the Multi-axial Testing of Advanced High Strength Steel Sheets. ExperimentalMechanics, 48(1):65–77, February 2008.

[231] C. L. Moore and H. A. Bruck. A fundamental investigation into largestrain recovery of one-way shape memory alloy wires embedded in flex-ible polyurethanes. Smart Materials and Structures, 11(1):130–139,February 2002.

[232] Andy Morris, J. P. Dear, and M. Kourmpetis. Monitoring High Tem-perature Steam Pipes Using Optical Strain Measurement Techniques.Applied Mechanics and Materials, 5-6:145–154, 2006.

[233] Go Murasawa and Satoru Yoneyama. Local Strain Distribution Arisingin Shape Memory Alloy Composite Subjected to Thermal Loading.Materials Transactions, 47(3):766–771, 2006.

[234] Go Murasawa, Satoru Yoneyama, and Toshio Sakuma. Nucleation, bi-furcation and propagation of local deformation arising in NiTi shapememory alloy. Smart Materials and Structures, 16(1):160–167, Febru-ary 2007.

[235] Go Murasawa, Satoru Yoneyama, Toshio Sakuma, and MasahisaTakashi. Influence of Cyclic Loading on Inhomogeneous DeformationBehavior Arising in NiTi Shape Memory Alloy Plate. Materials Trans-actions, 47(3):780–786, 2006.

[236] K. Murata and M. Masuda. Microscopic observation of transverseswelling of latewood tracheid: effect of macroscopic/mesoscopic struc-ture. Journal of Wood Science, 52(4):283–289, 2006.

[237] Lech Muszynski. Empirical Data for Modeling: Methodological As-pects in Experimentation Involving Hygromechanical Characteristicsof Wood. Drying Technology, 24(9):1115–1120, 2006.

[238] Kenneth W. Ng, Christopher C.-B. Wang, Robert L. Mauck, Terri-Ann N. Kelly, Nadeen O. Chahine, Kevin D. Costa, Gerard A.Ateshian, and Clark T. Hung. A layered agarose approach to fabri-cate depth-dependent inhomogeneity in chondrocyte-seeded constructs.Journal of Orthopaedic Research, 23(1):134–141, January 2005.

[239] T. W. Ng. Shear measurement in digital speckle shearing interferom-etry using digital correlation. Optics Communications, 115(3-4):241–244, March 1995.

25

[240] Quang Thanh Nguyen, Sabine Care, Alain Millard, and Yves Berthaud.Analyse de la fissuration du beton arme en corrosion acceleree. ComptesRendus Mecanique, 335(2):99–104, February 2007.

[241] Christopher J. Orendorff, Sarah C. Baxter, Edie C. Goldsmith, andCatherine J. Murphy. Light scattering from gold nanorods: trackingmaterial deformation. Nanotechnology, 16(11):2601–2605, November2005.

[242] B. Pan, H. Xie, Z. Wang, K. Qian, and Z. Wang. Study on subsetsize selection in digital image correlation for speckle patterns. OpticsExpress, 16:7037–7048, 2008.

[243] B. Pan, H. M. Xie, T. Hua, W.N. Wang, and Y. Fang. DisplacementSmoothing and Strain Estimation Using Savitaky-Golay Filters in Digi-tal Image Correlation. Key Engineering Materials, 326-328(1):135–138,2006.

[244] Bing Pan and Hui-Min Xie. Digital Image Correlation Method withDifferential Evolution. Journal of Optoelectronics Laser, 18(1):100–103,2007.

[245] Bing Pan, Hui-Min Xie, Bo-Gin Xu, and Fu-Long Dai. Performanceof sub-pixel registration algorithms in digital image correlation. Mea-surement Science and Technology, 17(6):1615–1621, June 2006.

[246] Bing Pan, Hui-Min Xie, Bo-Gin Xu, and Fu-Long Dai. Performanceof sub-pixel registration algorithms in digital image correlation. Mea-surement Science and Technology, 17(6):1615–1621, June 2006.

[247] Bing Pan, Huimin Xie, Zhiqing Guo, and Tao Hua. Full-field strainmeasurement using a two-dimensional Savitzky-Golay digital differen-tiator in digital image correlation. Optical Engineering, 46(3):033601,March 2007.

[248] V. V. Panasyuk, Ya L. Ivanytskyi, and O. P. Maksymenko. Analysisof the Elastoplastic Deformation of the Material in the Process Zone.Materials Science, 40(5):648–655, June 2005.

[249] A. V. Panin, A. A. Panina, and Y. F. Ivanov. Deformation macrolocal-isation and fracture in ultrafine-grained armco iron. Materials Scienceand Engineering: A, in press, 2008.

26

[250] Seungbae Park, Ramji Dhakal, Lawrence Lehman, and Eric J. Cotts.Grain Deformation and Strain in Board Level SnAgCu Solder Inter-connects Under Deep Thermal Cycling. IEEE Transactions on Com-ponents and Packaging Technologies, 30(1):178–185, March 2007.

[251] E. Parsons, M. C. Boyce, and D. M. Parks. An experimental investiga-tion of the large-strain tensile behavior of neat and rubber-toughenedpolycarbonate. Polymer, 45:2665–2684, 2004.

[252] E. M. Parsons, M. C. Boyce, D. M. Parks, and M. Weinberg.Three-dimensional large-strain tensile deformation of neat and calciumcarbonate-filled high-density polyethylene. Polymer, 46(7):2257–2265,March 2005.

[253] S. Pattofatto, I. Elnasri, H. Zhao, H. Tsitsiris, F. Hild, and Y. Girard.Shock enhancement of cellular structures under impact loading: PartII Analysis. J. Mech. Phys. Solids, 55:2672–2686, 2007.

[254] Y. T. Pei, V. Ocelık, and J. T. M. De Hosson. Interfacial adhesion oflaser clad functionally graded materials. Materials Science and Engi-neering: A, 342(1):192–200, February 2003.

[255] A. Peled, J. M. Torrents, T. O. Mason, S. P. Shah, and E. J. Garboczi.Electrical Impedance Spectra to Monitor Damage During Tensile Load-ing of Cement Composites. ACI Materials Journal, 98(4):313–322, July2001.

[256] R. D. Pendse and P. Zhou. Methodology for predicting solder jointreliability in semiconductor packages. Microelectronics Reliability,42(2):301–305, February 2002.

[257] Jean-Noel Perie, Sylvain Calloch, Christophe Cluzel, and Francois Hild.Analysis of a multiaxial test on a C/C composite by using digital imagecorrelation and a damage model. Experimental Mechanics, 42(3):318–328, September 2002.

[258] Jean-Noel Perie, Hugo Leclerc, Stephane Roux, and Francois Hild.Digital image correlation and biaxial test on composite material foranisotropic damage law identification. International Journal of Solidsand Structures, 46(11-12):2388–2396, June 2009.

[259] W. H. Peters and W. F. Ranson. Digital imaging techniques in exper-imental stress analysis. Optical Engineering, 21(3):427–431, 1982.

27

[260] Alan Pilch, Ajay Mahajan, and Tsuchin Chu. Measurement of Whole-Field Surface Displacements and Strain Using a Genetic AlgorithmBased Intelligent Image Correlation Method. Journal of Dynamic Sys-tems, Measurement, and Control, 126(3):479–488, 2004.

[261] G. P. Pires, M. H. Robert, and R. Arrieux. Studies on drawing of thealuminium A5052 alloy in the thixocast condition. Journal of MaterialsProcessing Technology, 157-158:596–603, December 2004.

[262] Mark Pitter, Chung See, Jason Goh, and Michael Somekh. Focus errorsand their correction in microscopic deformation analysis using correla-tion. Optics Express, 10(23):1361–1367, 2002.

[263] Mark Pitter, Chung Wah See, and Michael Somekh. Subpixel mi-croscopic deformation analysis using correlation and artificial neuralnetworks. Optics Express, 8(6):322–327, 2001.

[264] O. Ple, E. Astudillo de la Vega, G. Bernier, and O. Bayard. Biax-ial Tensile Behavior of the Reactive Powder Concrete. ACI SpecialPublication, 209:369–388, September 2002.

[265] C. Poilane, E. Lantz, G. Tribillon, and P. Delobelle. Measurement ofin-plane displacement fields by a spectral phase algorithm applied tonumerical speckle photography for microtensile tests. The EuropeanPhysical Journal - Applied Physics, 11:131–145, 2000.

[266] J. Poissant and F. Barthelat. A novel ”subset splitting” procedure fordigital image correlation on discontinuous displacement fields. Experi-mental Mechanics, in press, 2010.

[267] A. Poitou, A. Ammar, Y. Marco, L. Chevalier, and M. Chaouche.Crystallization of polymers under strain: from molecular propertiesto macroscopic models. Computer Methods in Applied Mechanics andEngineering, 192(28-30):3245–3264, July 2003.

[268] M. Puyo-Pain, F. Hild, and J. Lamon. Methodes de mesures de champset d’identification des proprietes elastiques par correlation d’imagesnumeriques : application a l’etude d’un joint de brasure ceramique.Revue des Composites et des Materiaux Avances, 15(1):19–31, 2005.

[269] C. Quan, C. J. Tay, and Y. H. Huang. 3-D deformation measurementusing fringe projection and digital image correlation. Optik - Inter-national Journal for Light and Electron Optics, 115(4):164–168, July2004.

28

[270] C. Quan, C. J. Tay, W. Sun, and X. He. Determination of three-dimensional displacement using two-dimensional digital image correla-tion. Applied Optics, 47(4):583–593, February 2008.

[271] J. Quinta Da Fonseca, P. M. Mummery, and P. J. Withers. Full-fieldstrain mapping by optical correlation of micrographs acquired duringdeformation. Journal of Microscopy, 218(1):9–21, April 2005.

[272] P. J. Rae, S. J. P. Palmer, H. T. Goldrein, A. L. Lewis, and J. E.Field. White-light digital image cross-correlation (DICC) analysis ofthe deformation of composite materials with random microstructure.Optics and Lasers in Engineering, 41(4):635–648, April 2004.

[273] D. Raffard, P. Ienny, and J. P. Henry. Displacement and Strain Fieldsat a Stone/Mortar Interface by Digital Image Processing. Journal ofTesting and Evaluation, 29(2):115–122, 2001.

[274] Joseph F. Rakow and Anthony M. Waas. Size Effects in Metal FoamCores for Sandwich Structures. AIAA Journal, 42(7):1331–1337, July2004.

[275] David T. Read, Yi-Wen Cheng, Robert R. Keller, and J. David Mc-Colskey. Tensile properties of free-standing aluminum thin films.Scripta Materialia, 45(5):583–589, September 2001.

[276] A. L. Rechenmacher and R. J. Finno. Digital Image Correlation toEvaluate Shear Banding in Dilative Sands. ASTM Geotechnical TestingJournal, 27(1):13–22, January 2004.

[277] Amy L. Rechenmacher. Grain-scale processes governing shear bandinitiation and evolution in sands. Journal of the Mechanics and Physicsof Solids, 54(1):22–45, January 2006.

[278] J. Rethore, A. Gravouil, F. Morestin, and A. Combescure. Estima-tion of mixed-mode stress intensity factors using digital image corre-lation and an interaction integral. International Journal of Fracture,132(1):65–79, March 2005.

[279] J. Rethore, F. Hild, and S. Roux. Shear-band capturing using a multi-scale extended digital image correlation technique. Computer Methodsin Applied Mechanics and Engineering, 196(49-52):5016–5030, Novem-ber 2007.

29

[280] J. Rethore, F. Hild, and S. Roux. Extended digital image correlationwith crack shape optimization. International Journal for NumericalMethods in Engineering, 73(2):258–272, 2008.

[281] J. Rethore, S. Roux, and F. Hild. From pictures to extended finite el-ements: extended digital image correlation (X-DIC). Comptes RendusMecanique, 335(3):131–137, March 2007.

[282] J. Rethore, S. Roux, and F. Hild. An extended and integrated digitalimage correlation technique applied to the analysis fractured samples.Eur. J. Comput. Mech, in press, 2008.

[283] J. Rethore, S. Roux, and F. Hild. Noise-robust Stress Intensity Fac-tor Determination from Kinematic Field Measurements. EngineeringFracture Mechanics, in press, 2008.

[284] Mohammad R. Riahi, Hamid Latifi, and Mohsen Sajjadi. Speckle cor-relation photography for the study of water content and sap flow inplant leaves. Applied Optics, 45(29):7674–7678, October 2006.

[285] S. Roux and F. Hild. Stress intensity factor measurements from digitalimage correlation: post-processing and integrated approaches. Inter-national Journal of Fracture, 140(1-4):141–157, July 2006.

[286] S. Roux and F. Hild. Digital Image Mechanical Identification (DIMI).Experimental Mechanics, in press, 2008.

[287] S. Roux, F. Hild, P. Viot, and D. Bernard. Three dimensional imagecorrelation from X-ray computed tomography of solid foam. Comp.Part A, in press, 2008.

[288] Kevin L. Ruggy and Brian N. Cox. Deformation Mechanisms of DryTextile Preforms under Mixed Compressive and Shear Loading. Jour-nal of Reinforced Plastics and Composites, 23(13):1425–1442, Septem-ber 2004.

[289] N. Sabate, D. Vogel, A. Gollhardt, J. Keller, C. Cane, I. Gracia, J. R.Morante, and B. Michel. Residual Stress Measurement on a MEMSStructure With High-Spatial Resolution. IEEE/ASME Journal of Mi-croelectromechanical Systems, 16(2):365–372, April 2007.

[290] N. Sabate, D. Vogel, A. Gollhardt, J. Keller, B. Michel, C. Cane,I. Gracia, and J. R. Morante. Measurement of residual stresses inmicromachined structures in a microregion. Applied Physics Letters,88(7):071910, February 2006.

30

[291] N. Sabate, D. Vogel, A. Gollhardt, J. Marcos, I. Gracia, C. Cane, andB. Michel. Digital image correlation of nanoscale deformation fields forlocal stress measurement in thin films. Nanotechnology, 17(20):5264–5270, October 2006.

[292] Samer Sadek, Magued G. Iskander, and Jinyuan Liu. Accuracy ofDigital Image Correlation for Measuring Deformations in TransparentMedia. Journal of Computing in Civil Engineering, 17(2):88–96, April2003.

[293] Samer Sadek, Magued G. Iskander, and Jinyuan Liu. Closure to ”Accu-racy of Digital Image Correlation for Measuring Deformation in Trans-parent Media” by Samer Sadek, Magued G. Iskander, and Jinyuan Liu.Journal of Computing in Civil Engineering, 19(2):219–222, 2005.

[294] Takahide Sakagami, Takashi Nishimura, Naoki Yamaguchi, and ShiroKubo. Development of a New Motion Compensation Techniquein Infrared Stress Measurement Based on Digital Image CorrelationMethod. Transactions of the Japan Society of Mechanical Engineers.A, 72(724):1853–1859, 2006.

[295] F. M. Sanchez and G. Pulos. Micro and Macromechanical Study ofStress-Induced Martensitic Transformation in a Cu-Al-Be Polycrys-talline Shape Memory Alloy. Materials Science Forum, 509:87–92,2006.

[296] P. Schlosser, H. Louche, D. Favier, and L. Orgeas. Image Processing toEstimate the Heat Sources Related to Phase Transformations duringTensile Tests of NiTi Tubes. Strain, 43(3):260–271, August 2007.

[297] H. W. Schreier, J. Braasch, and M. A. Sutton. Systematic errors indigital image correlation caused by intensity interpolation. Optical En-gineering, 39(11):2915–2921, 2000.

[298] H. W. Schreier and M. A. Sutton. Systematic Errors in Digital ImageCorrelation Due to Undermatched Subset Shape Functions. Experi-mental Mechanics, 42(3):303–310, September 2002.

[299] W. A. Scrivens, Y. Luo, M. A. Sutton, S. A. Collette, M. L. Myrick,P. Miney, P. E. Colavita, A. P. Reynolds, and X. Li. Developmentof Patterns for Digital Image Correlation Measurements at ReducedLength Scales. Experimental Mechanics, 47(1):63–77, February 2007.

31

[300] Y. Seo, Y. R. Kim, M. W. Witczak, and R. Bonaquist. Application ofDigital Image Correlation Method to Mechanical Testing of Asphalt-Aggregate Mixtures. Transportation Research Record, 1789:162–172,2002.

[301] X. Q. Shi, Z. P. Wang, and J. P. Pickering. A new methodology forthe characterization of fracture toughness of filled epoxy films involvedin microelectronics packages. Microelectronics Reliability, 43(7):1105–1115, July 2003.

[302] X. Q. Shi, Y. L. Zhang, and W. Zhou. Determination of FractureToughness of Underfill/Chip Interface With Digital Image Speckle Cor-relation Technique. IEEE Transactions on Components and PackagingTechnologies, 30(1):101–109, March 2007.

[303] Dong-Jin Shim, S. Mark Spearing, and Qingda Yang. Crack Initi-ation and Growth in Solder Joints Under Cyclic Shear DeformationUsing Piezomechanical Actuation. Journal of Engineering Materialsand Technology, 129(1):19–28, 2007.

[304] Andrey Shipsha, Stefan Hallstrom, and Dan Zenkert. Failure Mecha-nisms and Modelling of Impact Damage in Sandwich Beams – A 2DApproach: Part I – Experimental Investigation. Journal of SandwichStructures and Materials, 5(1):7–31, January 2003.

[305] A. Shterenlikht, F. A. Dıaz Garrido, P. Lopez Crespo, Philip. J. With-ers, and E. A. Patterson. Mixed Mode (KI+KII) stress Intensity FactorMeasurement by Electronic Speckle Pattern Interferometry and ImageCorrelation. Applied Mechanics and Materials, 1-2:107–112, 2004.

[306] A. Shterenlikht, Danut Stefanescu, Matthew E. Fox, Kerry Taylor,Joao Quinta da Fonseca, A. H. Sherry, and Philip. J. Withers. Mea-suring and Predicting the Effects of Residual Stresses on Crack Prop-agation. Materials Science Forum, 524-525:77–82, 2006.

[307] G. Sierra, B. Wattrisse, and C. Bordreuil. Structural Analysis of Steelto Aluminum Welded Overlap Joint by Digital Image Correlation. Ex-perimental Mechanics, 48(2):213–223, April 2008.

[308] M. Sjodahl. Electronic speckle photography: increased accuracy bynonintegral pixel shifting. Applied Optics, 33:6667–6673, October 1994.

[309] M. Sjodahl. Accuracy in electronic speckle photography. Applied Op-tics, 36(13):2875–2885, May 1997.

32

[310] M. Sjodahl. Some recent advances in electronic speckle photography.Optics and Lasers in Engineering, 29(2-3):125–144, March 1998.

[311] E. Soppa, P. Doumalin, P. Binkele, T. Wiesendanger, M. Bornert, andS. Schmauder. Experimental and numerical characterisation of in-planedeformation in two-phase materials. Computational Materials Science,21(3):261–275, July 2001.

[312] Y. W. Stegeman, A. M. Goijaerts, D. Brokken, W. A. M. Brekelmans,L. E. Govaert, and F. P. T. Baaijens. An experimental and numericalstudy of a planar blanking process. Journal of Materials ProcessingTechnology, 87(1):266–276, March 1999.

[313] Kolluru V. Subramaniam, Christian Carloni, and Lucio Nobile. Widtheffect in the interface fracture during shear debonding of FRP sheetsfrom concrete. Engineering Fracture Mechanics, 74(4):578–594, March2007.

[314] Yaofeng Sun and John H. L. Pang. AFM image reconstruction for de-formation measurements by digital image correlation. Nanotechnology,17(4):933–939, February 2006.

[315] Yaofeng Sun and John H. L. Pang. Study of optimal subset size indigital image correlation of speckle pattern images. Optics and Lasersin Engineering, 45(9):967–974, September 2007.

[316] Yaofeng Sun and John H. L. Pang. Digital image correlation for solderjoint fatigue reliability in microelectronics packages. MicroelectronicsReliability, 48(2):310–318, 2008.

[317] Yaofeng Sun, John H. L. Pang, Chee Khuen Wong, and Fei Su. Finiteelement formulation for a digital image correlation method. AppliedOptics, 44(34):7357–7363, December 2005.

[318] Zili Sun, Jed S. Lyons, and Stephen R. McNeill. Measuring micro-scopic deformations with digital image correlation. Optics and Lasersin Engineering, 27(4):409–428, July 1997.

[319] Hyung Jin Sung, Sang-Hyun Park, and Moo Sang Kim. Accuracy ofcorrelation-based image registration for pressure-sensitive paint. Ex-periments in Fluids, 39(3):630–635, September 2005.

[320] Hyung Jin Sung, Sang-Hyun Park, and Moo Sang Kim. Erratum to”accuracy of correlation-based image registration for pressure-sensitive

33

paint” [Exp. in Fluids 39 (2005) 630–635]. Experiments in Fluids,40(4):664–664, April 2006.

[321] M. A. Sutton and Y. J. Chao. Measurement of Strains in a Paper Ten-sile Specimen Using Computer Vision and Digital Image Correlation –Part 1: Data Acquisition and Image Analysis System. Tappi Journal,70(3):173–175, 1988.

[322] M. A. Sutton, M. Q. Cheng, W. H. Peters, Y. J. Chao, and S. R.McNeill. Application of an Optimized Digital Correlation Method toPlanar Deformation Analysis. Image and Vision Computing, 4(3):143–150, August 1986.

[323] M. A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S. R. McNeill,H. W. Schreier, and X. Li. Metrology in a scanning electron microscope:theoretical developments and experimental validation. MeasurementScience and Technology, 17(10):2613–2622, August 2006. ISSN 0957-0233.

[324] M. A. Sutton, N. Li, D. Garcia, N. Cornille, J.-J. Orteu, S. R. McNeill,H. W. Schreier, X. Li, and A. P. Reynolds. Scanning Electron Mi-croscopy for Quantitative Small and Large Deformation Measurementspart II: Experimental Validation for Magnifications from 200 to 10,000.Experimental Mechanics, 47(6):789–804, December 2007.

[325] M. A. Sutton, N. Li, D. C. Joy, A. P. Reynolds, and X. Li. Scan-ning Electron Microscopy for Quantitative Small and Large Deforma-tion Measurements part I: SEM Imaging at Magnifications from 200 to10,000. Experimental Mechanics, 47(6):775–787, December 2007.

[326] M. A. Sutton, S. R. McNeill, J. Jang, and M. Babai. Effects of Sub-pixelImage Restoration on Digital Correlation Error. Optical Engineering,27(10):870–877, 1988.

[327] M. A. Sutton, W. J. Wolters, W. H. Peters, W. F. Ranson, and S. R.McNeill. Determination of Displacements Using an Improved DigitalCorrelation Method. Image and Vision Computing, 1(3):133–139, Au-gust 1983.

[328] M. A. Sutton, J. H. Yan, S. Avril, F. Pierron, and S. M. Adeeb. Identi-fication of Heterogeneous Constitutive Parameters in a Welded Speci-men: Uniform Stress and Virtual Fields Methods for Material PropertyEstimation. Experimental Mechanics, in press, 2009.

34

[329] Michael A. Sutton, Baolin Wan, Michael F. Petrou, and Kent Harries.Two-dimensional computer vision to investigate FRP-concrete bondtoughness. Advanced Measurement Methods, 1, 2002.

[330] Michael A. Sutton, Bangcheng Yang, Anthony P. Reynolds, and JunhuiYan. Banded microstructure in 2024-T351 and 2524-T351 aluminumfriction stir welds: Part II. Mechanical characterization. MaterialsScience and Engineering: A, 364(1-2):66–74, January 2004.

[331] Per Synnergren and Mikael Sjodahl. Optical in-plane strain field sensor.Applied Optics, 41(7):1323–1329, March 2002.

[332] L. Tabourot, P. Vacher, T. Coudert, F. Toussaint, and R. Arrieux.Numerical determination of strain localisation during finite elementsimulation of deep-drawing operations. Journal of Materials ProcessingTechnology, 159(2):152–158, January 2005.

[333] H. Tan, C. Liu, Y. Huang, and P. H. Geubelle. The cohesive law for theparticle/matrix interfaces in high explosives. Journal of the Mechanicsand Physics of Solids, 53(8):1892–1917, August 2005.

[334] C. Tang. A new synthetical algorithm for digital image correlationmethod and its application in the fracture. Optical Technique, 29(1):69–72, 2003.

[335] Chen Tang, Ming Liu, Haiqing Yan, Guimin Zhang, and ZhanqingChen. The improved genetic algorithms for digital image correlationmethod. Chinese Optics Letters, 2(10):574–577, 2004.

[336] Gang Tao and Zihui Xia. A non-contact real-time strain measurementand control system for multiaxial cyclic/fatigue tests of polymer mate-rials by digital image correlation method. Polymer Testing, 24(7):844–855, October 2005.

[337] V. Tarigopula, O. S. Hopperstad, M. Langseth, A. H. Clausen, andF. Hild. A study of localisation in dual-phase high-strength steels un-der dynamic loading using digital image correlation and FE analysis.International Journal of Solids and Structures, 45(2):601–619, January2008.

[338] V. Tarigopula, O. S. Hopperstad, M. Langseth, A. H. Clausen, F. Hild,O.-G. Lademo, and M. Eriksson. A Study of Large Plastic Defor-mations in Dual Phase Steel Using Digital Image Correlation and FEAnalysis. Experimental Mechanics, 48(2):181–197, April 2008.

35

[339] C. J. Tay, C. Quan, Y. H. Huang, and Y. Fu. Digital image correlationfor whole field out-of-plane displacement measurement using a singlecamera. Optics Communications, 251(1-3):23–26, 2005.

[340] M. S. Thompson, H. Schell, J. Lienau, and G. N. Duda. Digital imagecorrelation: A technique for determining local mechanical conditionswithin early bone callus. Medical Engineering & Physics, 29(7):820–823, September 2007.

[341] Qi Tian and Michael N. Huhns. Algorithms for subpixel registration.Computer Vision, Graphics, and Image Processing, 35(2):220–233, Au-gust 1986.

[342] W. Tong. Strain characterization of propagative deformation bands.Journal of the Mechanics and Physics of Solids, 46(10):2087–2102, Oc-tober 1998.

[343] W. Tong. An Evaluation of Digital Image Correlation Criteria forStrain Mapping Applications. Strain, 41(4):167–175, November 2005.

[344] Wei Tong. Detection of plastic deformation patterns in a binary alu-minum alloy. Experimental Mechanics, 37(4):452–459, December 1997.

[345] Wei Tong. Plastic Surface Strain Mapping of Bent Sheets by ImageCorrelation. Experimental Mechanics, 44(5):502–511, October 2004.

[346] Wei Tong. Technical Application Series – An Adaptive Backward ImageCorrelation Technique for Deformation Mapping of a Growing Crackin Thin Sheets. Experimental Techniques, 28(3):63–67, 2004.

[347] Wei Tong, Hong Tao, Xiquan Jiang, Nian Zhang, Manuel P. Marya,Louis G. Hector, and Xiaohong Q. Gayden. Deformation and Fractureof Miniature Tensile Bars with Resistance-Spot-Weld Microstructures.Metallurgical and Materials Transactions A, 36(10):2651–2669, Octo-ber 2005.

[348] M. D. Trexler, T. H. Sanders, and P. M. Singh. Automation of aMcBain-Bakr-type thermogravimetric analyzer using a digital imagecorrelation technique. Review of Scientific Instruments, 77(B2):025103,February 2006.

[349] S. Ukyo and M. Masuda. Fracture Analysis of Wood in Moment-Resisting Joints with Four Drift-Pins Using Digital Image CorrelationMethod (DIC). Journal of the Society of Materials Science, Japan,51(4):367–372, 2002.

36

[350] S. Ukyo and M. Masuda. Strain Analysis of Wood around Drift-pinJoints Using the Digital Image Correlation Method. Journal of theJapan Wood Research Society, 49(3):197–203, 2003.

[351] S. Ukyo and M. Masuda. Investigation of the True Stress-Strain Rela-tion in Shear Using the Digital Image Correlation Method. Journal ofthe Japan Wood Research Society, 50(3):146–150, 2004.

[352] E. Umezaki and K. Futase. Deformation Behaviour of the Cross-Sectionof a Heat-Sealed Area in Plastic Film Used for Liquid Package Bags.The Journal of Strain Analysis for Engineering Design, 32(1):29–35,1997.

[353] Eisaku Umezaki. Evaluation of Crack Closure in Epoxy Resin Plateswith an Embedded SMA Wire Using Digital Image Correlation. Trans-actions of Materials Research Society of Japan, 28(3):679–682, 2003.

[354] Eisaku Umezaki and Tadashi Ichikawa. Measurement of Deformationof Epoxy Resin Plates with an Embedded SMA Wire Using Digitalimage Correlation. International Journal of Modern Physics B, 17(8-9):1750–1755, 2003.

[355] P. Vacher, S. Dumoulin, F. Morestin, and S. Mguil-Touchal. Bidi-mensional strain measurement using digital images. Proceedings of theInstitution of Mechanical Engineers, Part C: Journal of MechanicalEngineering Science, 213(8):811–817, 1999.

[356] M. F. Vallat, P. Martz, J. Fontaine, and J. Schultz. The application ofcoherent optics to the study of adhesive joints. I. Speckle photography.Journal of Applied Polymer Science, 31(2):309–321, February 1986.

[357] H. C. E. van der Aa, M. A. H. van der Aa, P. J. G. Schreurs, F. P. T.Baaijens, and W. J. van Veenen. An experimental and numerical studyof the wall ironing process of polymer coated sheet metal. Mechanicsof Materials, 32(7):423–443, July 2000.

[358] Wim Van Paepegem, Assen A. Shulev, Ilia R. Roussev, Stijn De Pauw,Joris Degrieck, and Ventseslav C. Sainov. Study of the deformationcharacteristics of window security film by digital image correlation tech-niques. Optics and Lasers in Engineering, 47(3-4):390–397, 2009.

[359] S. Vanlanduit, J. Vanherzeele, R. Longo, and P. Guillaume. A digitalimage correlation method for fatigue test experiments. Optics andLasers in Engineering, 47(3-4):371–378, 2009.

37

[360] G. Vendroux and W. G. Knauss. Submicron deformation field mea-surements: Part 1. Developing a digital scanning tunneling microscope.Experimental Mechanics, 38(1):18–23, March 1998.

[361] G. Vendroux and W. G. Knauss. Submicron deformation field: Part 2.Improved digital image correlation. Experimental Mechanics, 38(2):86–92, June 1998.

[362] G. Vendroux, N. Schmidt, and W. G. Knauss. Submicron deformationfield measurements: Part 3. Demonstration of deformation determina-tions. Experimental Mechanics, 38(3):154–160, September 1998.

[363] D. Vogel, A. Gollhardt, and B. Michel. Micro- and nanomaterials char-acterization by image correlation methods. Sensors and Actuators A:Physical, 99(1-2):165–171, April 2002.

[364] B. Wagne, S. Roux, and F. Hild. Spectral Approach to DisplacementEvaluation from Image Analysis. The European Physical Journal -Applied Physics, 17:247–252, 2002.

[365] Baolin Wan, Michael A. Sutton, Michael F. Petrou, Kent A. Harries,and Ning Li. Investigation of Bond between Fiber Reinforced Polymerand Concrete Undergoing Global Mixed Mode I/II Loading. Journalof Engineering Mechanics, 130(12):1467–1475, 2004.

[366] Christopher C.-B. Wang, Nadeen O. Chahine, Clark T. Hung, and Ger-ard A. Ateshian. Optical determination of anisotropic material prop-erties of bovine articular cartilage in compression. Journal of Biome-chanics, 36(3):339–353, March 2003.

[367] Christopher C.-B. Wang, Jian-Ming Deng, Gerard A. Ateshian, andClark T. Hung. An Automated Approach for Direct Measurement ofTwo-Dimensional Strain Distributions Within Articular Cartilage Un-der Unconfined Compression. Journal of Biomechanical Engineering,124(5):557–567, 2002.

[368] H. Wang, H. Xie, Y. Ju, and Q. Duan. Error Analysis of Digital SpeckleCorrelation Method Under Scanning Electron Microscope. Experimen-tal Techniques, 30(2):42–45, March 2006.

[369] Hongzhi Wang, Suwei Yao, and Sowjun Matsumura. Preparation, char-acterization and the study of the thermal strain in NiW gradient de-posits with nanostructure. Surface and Coatings Technology, 157(2-3):166–170, August 2002.

38

[370] Min Wang, Yuwan Cen, Xiaofang Hu, Xiaoliu Yu, Nenggang Xie,Yuguo Wu, Peimin Xu, and Deyi Xu. A weighting window appliedto the digital image correlation method. Optics & Laser Technology,in press, 2008.

[371] Y. Wang and A. M. Cuitino. Full-field measurements of heterogeneousdeformation patterns on polymeric foams using digital image correla-tion. International Journal of Solids and Structures, 39(13):3777–3796,June 2002.

[372] Y. Wang, G. Gioia, and A. M. Cuitino. The Deformation Habits ofCompressed Open-Cell Solid Foams. Journal of Engineering Materialsand Technology, 122(4):376–378, October 2000.

[373] Y. Q. Wang, M. A. Sutton, H. A. Bruck, and H. W. Schreier. Quan-titative Error Assessment in Pattern Matching: Effects of IntensityPattern Noise, Interpolation, Strain and Image Contrast on MotionMeasurements. Strain, 45(2):160–178, April 2009.

[374] Z. Y. Wang, H. Q. Li, J. W. Tong, and J. T. Ruan. Brief TechnicalNote – Statistical Analysis of the Effect of Intensity Pattern Noise onthe Displacement Measurement Precision of Digital Image CorrelationUsing Self-correlated Images. Experimental Mechanics, 47(5):701–707,2007.

[375] Z. Y. Wang, H. Q. Li, J. W. Tong, M. Shen, F. Aymerich, and P. Priolo.Dual Magnification Digital Image Correlation Based Strain Measure-ment in CFRP Laminates with Open Hole. Composites Science andTechnology, in press, 2008.

[376] B. Wattrisse, A. Chrysochoos, J.-M. Muracciole, and M. Nemoz-Gaillard. Analysis of Strain Localization during Tensile Tests by DigitalImage Correlation. Experimental Mechanics, 41(1):29–39, March 2001.

[377] B. Wattrisse, A. Chrysochoos, J.-M. Muracciole, and M. Nemoz-Gaillard. Kinematic manifestations of localisation phenomena insteels by digital image correlation. European Journal of Mechanics- A/Solids, 20(2):189–211, March 2001.

[378] B. Wattrisse, J.-M. Muracciole, and A. Chrysochoos. Thermomechani-cal effects accompanying the localized necking of semi-crystalline poly-mers. International Journal of Thermal Sciences, 41(5):422–427, April2002.

39

[379] B. Wattrisse, J.-M. Muracciole, and A. Chrysochoos. Dissipative mech-anisms during the necking of a semi-crystalline polymer. Mecanique &Industries, 4(6):667–671, November 2003.

[380] H. Wen and Y. R. Kim. Simple performance test for fatigue crack-ing and validation with westrack mixtures. Transportation ResearchRecord, 1789:66–72, 2002.

[381] David J. White, W. Andy Take, and Malcolm D. Bolton. Discussionof ”Accuracy of Digital Image Correlation for Measuring Deformationsin Transparent Media” by Samer Sadek, Magued G. Iskander, andJinyuan Liu. Journal of Computing in Civil Engineering, 19(2):217–219, 2005.

[382] A. Willems, S. V. Lomov, I. Verpoest, and D. Vandepitte. Opticalstrain fields in shear and tensile testing of textile reinforcements. Com-posites Science and Technology, in press, 2008.

[383] A. Willems, S. V. Lomov, I. Verpoest, and D. Vandepitte. Drape-abilitycharacterization of textile composite reinforcements using digital imagecorrelation. Optics and Lasers in Engineering, 47(3-4):343–351, 2009.

[384] An Willems, Stepan V. Lomov, Ignaas Verpoest, and Dirk Vandepitte.Picture frame shear tests on woven textile composite reinforcementswith controlled pretension. AIP Conference Proceedings, 907(1):999–1004, 2007.

[385] Philip J. Withers. Strain Measurement by Digital Image Correlation.Strain, 44(6):421–422, 2008.

[386] H. Wolf, D. Konig, and Th. Triantafyllidis. Centrifuge model tests onsand specimen under extensional load. International Journal for Nu-merical and Analytical Methods in Geomechanics, 29(1):25–47, January2005.

[387] H. Wolf, D. Konig, and Th. Triantafyllidis. The influence of the stress-strain behavior of non-cohesive soils on the geometry of shear bandsystems under extensional strain. Engineering Structures, 28(13):1760–1773, November 2006.

[388] Guo-Fu Xiang, Qing-Chuan Zhang, Hao-Wen Liu, Hui-Feng Jiang, andXiao-Ping Wu. Deformation measurements of three types of Portevin-Le Chatelier bands. Chinese Physics, 15(10):2378–2384, October 2006.

40

[389] Luhua Xu and John H. L. Pang. In-Situ Electromigration Study onSn-Ag-Cu Solder Joint by Digital Image Speckle Analysis. Journal ofElectronic Materials, 35(11):1993–1999, November 2006.

[390] I. Yamaguchi. Automatic measurement of in-plane translation byspeckle correlation using a linear image sensor. Journal of PhysicsE - Scientific Instruments, 19(11):944–948, November 1986.

[391] Fujun Yang, Xiaoyuan He, and Chenggen Quan. Characterization ofdynamic microgyroscopes by use of temporal digital image correlation.Applied Optics, 45(30):7785–7790, 2006.

[392] Guobiao Yang and Kui Wu. Principles and research of a high accuracydigital image correlation measurement system. Optical Engineering,46(5):051006 (5 pages), May 2007.

[393] S. Yoneyama, A. Kitagawa, S. Iwata, K. Tani, and H. Kikuta. BridgeDeflection Measurement Using Digital Image Correlation. ExperimentalTechniques, 31(1):34–40, January/February 2007.

[394] S. Yoneyama, A. Kitagawa, S. Iwata, K. Tani, K. Kitamura, andH. Kikuta. Noncontact Deflection Distribution Measurement of BridgesUsing digital Image Correlation. Journal of Japanese Society for Non-Destructive Inspection, 55(B3):119–125, 2006.

[395] S. Yoneyama and Y. Morimoto. Accurate Displacement Measurementby Correlation of Colored Random Patterns. JSME International Jour-nal. Series A, Solid Mechanics and Material Engineering, 46(2):178–184, 2003.

[396] S. Yoneyama, Y. Morimoto, and M. Takashi. Automatic Evaluationof Mixed-mode Stress Intensity Factors Utilizing Digital Image Corre-lation and Nonlinear Least-squares. Journal of Japanese Society forNon-Destructive Inspection, 51(10):667–673, 2002.

[397] S. Yoneyama, Y. Morimoto, and M. Takashi. Automatic Evaluation ofMixed-mode Stress Intensity Factors Utilizing Digital Image Correla-tion. Strain, 42(1):21–29, February 2006.

[398] S. Yoneyama, T. Ogawa, and Y. Kobayashi. Evaluating mixed-modestress intensity factors from full-field displacement fields obtained byoptical methods. Engineering Fracture Mechanics, 74(9):1399–1412,June 2007.

41

[399] Satoru Yoneyama, Hisao Kikuta, Akikazu Kitagawa, and Koji Kita-mura. Lens distortion correction for digital image correlation by mea-suring rigid body displacement. Optical Engineering, 45(2):023602,February 2006.

[400] Satoru Yoneyama, Akikazu Kitagawa, Koji Kitamura, and HisaoKikuta. In-Plane Displacement Measurement Using Digital Image Cor-relation with Lens Distortion Correction. JSME International Journal.Series A, Solid Mechanics and Material Engineering, 49(3):458–467,2006.

[401] Y. Yong, W. Yanlei, and L. Ming. Research of High-Accuracy Dig-ital Image Correlation Measurement System. Acta Optica Sinica,26(B2):197–201, 2006.

[402] Nobuhiro Yoshikawa, Shouji Kuzukami, and Osamu Kuwazuru. Iden-tification of Displacement Field by X-Ray CT. Key Engineering Ma-terials, 326-328:765–768, 2006.

[403] K. Zarrabi and Z. Lu. Creep strain evaluation on 2.25%CR1%MOsteel at elevated temperatures using a non-destructive technique. Non-Destructive Testing - Australia, 41(4):108–109, 2004.

[404] D. Zhang, D. Arola, P. G. Charalambides, and M. C. L. Patterson.On the mechanical behavior of carbon-carbon optic grids determinedusing a bi-axial optical extensometer. Journal of Materials Science,39(14):4495–4505, July 2004.

[405] D. Zhang, A. Nazari, M. Soappman, D. Bajaj, and D. Arola. Methodsfor Examining the Fatigue and Fracture Behavior of Hard Tissues.Experimental Mechanics, 47(3):325–336, June 2007.

[406] Dongsheng Zhang, Dwayne D. Arola, Robert K. Reprogel, Wei Zheng,Uri Tasch, and Robert M. Dyer. A method for characterizing themechanical behaviour of hoof horn. Journal of Materials Science,42(4):1108–1115, January 2007.

[407] Dongsheng Zhang, Charles D. Eggleton, and Dwayne D. Arola. Eval-uating the mechanical behavior of arterial tissue using digital imagecorrelation. Experimental Mechanics, 42(4):409–416, December 2002.

[408] Dongsheng Zhang, Miao Luo, and Dwayne D. Arola. Displace-ment/strain measurements using an optical microscope and digital im-age correlation. Optical Engineering, 45(3):033605, March 2006.

42

[409] J. Zhang, M. Li, C. Y. Xiong, J. Fang, and S. Yi. Thermal deforma-tion analysis of BGA package by digital image correlation technique.Microelectronics International, 22(1):34–42, January 2005.

[410] J. Zhang, C. Xiong, H. Li, M. Li, J. Wang, and J. Fang. Damage andfracture evaluation of granular composite materials by digital imagecorrelation method. Acta Mechanica Sinica, 20(4):408–417, 2004.

[411] Jun Zhang, Guanchang Jin, Shaopeng Ma, and Libo Meng. Applica-tion of an improved subpixel registration algorithm on digital specklecorrelation measurement. Optics & Laser Technology, 35(7):533–542,October 2003.

[412] Zhi-Feng Zhang, Yi-Lan Kang, Huai-Wen Wang, Qing-Hua Qin,Yu Qiu, and Xiao-Qi Li. A novel coarse-fine search scheme for dig-ital image correlation method. Measurement, 39(8):710–718, October2006.

[413] J. Zhou, Z. Gao, S. Allameh, E. Akpan, A. Cuitino, and W. Soboyejo.Multiscale Deformation of Open Cell Aluminum Foams. Mechanics ofAdvanced Materials and Structures, 12(3):201–216, May-June 2005.

[414] J. Zhou, Z. Gao, A. M. Cuitino, and W. O. Soboyejo. Effects of heattreatment on the compressive deformation behavior of open cell alu-minum foams. Materials Science and Engineering: A, 386(1-2):118–128, November 2004.

[415] B. Zhu, T. X. Yu, and Xiao Ming Tao. Large Deformation and FailureMechanism of Plain Woven Composite in Bias Extension Test. KeyEngineering Materials, 334-335:253–256, 2007.

[416] Audrey G. Zink, Robert W. Davidson, and Robert B. Hanna. StrainMeasurement in Wood Using a Digital Image Correlation Technique.Wood and Fiber Science, 27(4):346–359, 1995.

Conference proceedings

[1] S. Adapa, T. P. Chu, and J. A. Schneider. Evaluation of Friction StirWelds. In Proceedings of ASME International Mechanical EngineeringCongress and Exposition, Orlando, Florida, USA, November 2005.

43

[2] S. Adeeb, D. Horsley, J. Yan, M. A. Sutton, and A. P. Reynolds. Lo-cal Stress-Strain Response of an Axial X100 Girth Weld Under Ten-sile Loading Using Digital Image Correlation. In Proceedings of IPC2006 6th International Pipeline Conference, Calgary, Alberta, Canada,September 2006.

[3] Ashraf Bastawros and Antonia Antoniou. Deformation Characteristicsof Solder Joints. In Proceedings of International Electronic PackagingTechnical Conference and Exhibition, Maui, Hawaii, USA, July 2003.

[4] Ashraf Bastawros and Antonia Antoniou. Experimental Observations ofthe Deformation Characteristics in Layered Structures. In Proceedingsof ASME International Mechanical Engineering Congress, Washington,D.C, USA, November 2003.

[5] S. Benedic, N. Bourgeois, S. Berveiller, and A. Eberhardt. Localstrain measurements by correlation of digital images obtained by whitelight confocal interferometery. In Proceedings of Photomechanics 2006,Clermont-Ferrand, France, 2006.

[6] Michel Bornert. Resolution and spatial resolution of digital image cor-relation techniques. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France, 2006.

[7] Michel Bornert. Evaluation metrologique d’algorithmes de correlationd’images numeriques. In Proceedings of Colloque Photomecanique 2007,Grenoble, France, 2007.

[8] B. L. Boyce, C. V. Robino, and P. L. Reu. Constitutive Gradientsand Pore Tolerance in Two Weldments. In Proceedings of ASME In-ternational Mechanical Engineering Congress and Exposition, Chicago,Illinois, USA, November 2006.

[9] G. B. Broggiato, F. Campana, and G. M. Newaz. Digital speckle cor-relation method: error assessment by design of experiment approach.In Proceedings of SEM 2004 Annual Conference on Experimental andApplied Mechanics, Costa Mesa, CA, USA, June 2004.

[10] Sylvain Calloch, Christophe Bouvet, Francois Hild, Cedric Doudard,and Christian Lexcellent. Analysis of mechanical behavior and in-situobservations of Cu-Al-Be SMA under biaxial compressive tests by usingDIC. In Xiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke, editors,SPIE Proceedings of Third International Conference on ExperimentalMechanics, volume 4537, pages 83–86, Beijing, China, 2002.

44

[11] S. Chambon and A. Crouzil. Dense matching using correlation: newmeasures that are robust near occlusions. In Proceedings of BritishMachine Vision Conference (BMVC’2003), pages 143–152, September2003.

[12] I. Chasiotis, S. W. Cho, T. A. Friedmann, and J. P. Sullivan. TheNanomechanics of Tetrahedral Amorphous Diamond-Like Carbon (ta-C)MEMS. In Proceedings of ASME International Mechanical EngineeringCongress, Washington, D.C, USA, November 2003.

[13] Ioannis Chasiotis and Wolfgang G. Knauss. Mechanical propertiesof thin polysilicon films by means of probe microscopy. In Craig R.Friedrich and Yuli Vladimirsky, editors, SPIE Proceedings of Materialsand Device Characterization in Micromachining, volume 3512, pages66–75, Santa Clara, CA, USA, 1998.

[14] Ioannis Chasiotis and Wolfgang G. Knauss. Microtensile tests with theaid of probe microscopy for the study of MEMS materials. In YuliVladimirsky and Philip J. Coane, editors, SPIE Proceedings of Materialsand Device Characterization in Micromachining III, volume 4175, pages96–103, Santa Clara, CA, USA, 2000.

[15] Jin-Long Chen, Jinglin Li, Yuwen Qin, and Baohui Liu. Digital im-age correlation for mechanical behavior of viscoelastic materials. InGong Xin Shen, Soyoung S. Cha, Fu-Pen Chiang, and Carolyn R. Mer-cer, editors, SPIE Proceedings of Optical Technology and Image Pro-cessing for Fluids and Solids Diagnostics, volume 5058, pages 543–547,Beijing, China, 2003.

[16] Jin-Long Chen, Cuiru Sun, Yuwen Qin, and Xin-Hua Ji. Marking-dotsdigital image correlation and application to studies of spinal biomechan-ics. In Chenggen Quan, Fook Siong Chau, Anand Asundi, Brian StephenWong, and Chwee Teck Lim, editors, SPIE Proceedings of Third Inter-national Conference on Experimental Mechanics and Third Conferenceof the Asian Committee on Experimental Mechanics, volume 5852, pages455–461, Singapore, 2005.

[17] J. Y. Cognard, P. Davies, and L. Sohier. Design and evaluation ofbonded composite assemblies. In Proceedings of European Congress onComputational Methods in Applied Sciences and Engineering (ECCO-MAS 2004), July 2004.

45

[18] J. Cugnoni, J. Botsis, and J. Janczak-Rusch. In-situ characterization ofconstrained lead-free solder materials by digital image correlation andinverse numerical methods. In Proceedings of Photomechanics 2006,Clermont-Ferrand, France, 2006.

[19] P. Doumalin and M. Bornert. Micromechanical applications of digitalimage correlation techniques. In P. Jacquot and J.M. Fournier, editors,Proceedings of Interferometry in Speckle Light, Theory and Applications,pages 67–74, 2000.

[20] P. Doumalin, M. Bornert, and D. Caldemaison. Caracterisationexperimentale du champ local de deformation dans les materiauxheterogenes par technique de correlation d’images numeriques. InY. Berthaud, M. Cottron, F. Morestin, P. Moucheront, and M. Taroni,editors, Proceedings of Photomecanique 98, pages 29–36. GAMAC, 1998.

[21] P. Doumalin, M. Bornert, and D. Caldemaison. Microextensometry byimage correlation applied to micromechanical studies using the scanningelectron microscopy. In The Japan Society of Mechanical Engineering,editor, Proceedings of International Conference on Advanced Technologyin Experimental Mechanics (ATEM 99), pages 81–86, Ube City, Japan,1999.

[22] P. Doumalin, M. Bornert, and E. Soppa. Computational and experi-mental investigations of the local strain field in elastoplastic two-phasematerials. In D. Miannay, P. Costa, D. Francois, and A. Pineau, edi-tors, Proceedings of Euromat 2000 – Advances in mechanical behaviour,plasticity and damage, pages 323–328, November 2000.

[23] Gustavo Gioia and Alberto Cuitino. The energetics of heterogeneousdeformation in open-cell elastic foams. In Proceedings of Annual APSMarch Meeting, Indianapolis, Indiana, USA, March 2002. AmericanPhysical Society (APS).

[24] H. Haddadi and B. Sofiane. Investigation and Estimation of the Mea-surement Errors Related to Digital Image Correlation Technique. In Pro-ceedings of 3rd Workshop on Optical Measurement Techniques for Struc-tures and Systems (OPTIMESS’2007), Leuven, Belgium, May 2007.

[25] Xiaoyuan He, Xin Kang, Chenggen Quan, Cho J. Tay, Shihua Wang,and Huai M. Shang. Optical methods for the measurement of MEMSmaterials and structures. In Xiaoping Wu, Yuwen Qin, Jing Fang, and

46

Jingtang Ke, editors, SPIE Proceedings of Third International Confer-ence on Experimental Mechanics, volume 4537, pages 63–68, Beijing,China, 2002.

[26] Jeffrey Helm and Stephen Kurtz. Digital-image-correlation-based exper-imental stress analysis of reinforced concrete beams strengthened usingcarbon composites. In J.-Angelo Beraldin, Sabry F. El-Hakim, ArminGruen, and James S. Walton, editors, SPIE Proceedings of VideometricsVIII, volume 5665, pages 40–50, San Jose, CA, USA, 2004.

[27] F. Hild. Digital image correlation: from measurement to identifica-tion. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France,2006.

[28] F. Hild, J.-N. Perie, J. Lamon, and M. Puyo-Pain. On the use of digitalimage correlation to analyze the mechanical properties of brittle matrixcomposites. In Proceedings of 107th Annual Meeting & Exposition of TheAmerican Ceramic Society, Baltimore, Maryland, USA, April 2005.

[29] Zhende Hou and Yuwen Qin. Study of the fractal correlation methodin displacement measurement. In Fook S. Chau and Chenggen Quan,editors, SPIE Proceedings of Second International Conference on Ex-perimental Mechanics, volume 4317, pages 32–36, Singapore, Singapore,2001.

[30] Zhende Hou, Yuwen Qin, and Lianyun Xiu. Measurement of displace-ment field around a crack tip using fractal correlation method. InGong Xin Shen, Soyoung S. Cha, Fu-Pen Chiang, and Carolyn R. Mer-cer, editors, SPIE Proceedings of Optical Technology and Image Process-ing for Fluids and Solids Diagnostics 2002, volume 5058, pages 312–316,Beijing, China, 2003.

[31] Y. Y. Hung, Y. H. Huang, and L. Liu. Novel Washer as Force Trans-ducer for Monitoring Clamping Force of Bolted Joints. In Proceedingsof ASME Pressure Vessels and Piping Division Conference, Vancoucer,BC, Canada, July 2006.

[32] Dmitry Ivanov, Kelly Vandenbosche, Sergey Ivanov, Fabien Baudry,Stepan Lomov, and Ignaas Verpoest. Strain mapping analysis of vari-ous textile composite and noise filtering of the data. In Proceedings of3rd Workshop on Optical Measurement Techniques for Structures andSystems (OPTIMESS’2007), Leuven, Belgium, May 2007.

47

[33] Hong-Wei Ji, Yuwen Qin, and Hua Lu. Nonlinear digital-image correla-tion method and its application in finite deformation measurement. InXiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke, editors, SPIEProceedings of Third International Conference on Experimental Mechan-ics, volume 4537, pages 390–393, Beijing, China, 2002.

[34] Ming Jiang, H. Y. Tam, and Xiao Yuan He. Phase shifting calibratedwith digital image correlation method. In Chenggen Quan, Fook SiongChau, Anand Asundi, Brian Stephen Wong, and Chwee Teck Lim, ed-itors, SPIE Proceedings of Third International Conference on Exper-imental Mechanics and Third Conference of the Asian Committee onExperimental Mechanics, volume 5852, pages 599–607, Singapore, 2005.

[35] Helena Jin, Wei-Yang Lu, Jeff Chames, and Nancy Yang. Characteriza-tion of LIGA Microsystems Using Digital Image Correlation Techniqueand SEM Imaging. In Proceedings of ASME International MechanicalEngineering Congress and Exposition, Orlando, Florida, USA, Novem-ber 2005.

[36] Helena Jin, Wei-Yang Lu, Simon Scheffel, Michael K. Neilsen, andTerry D. Hinnerichs. Characterization of Mechanical Behavior ofPolyurethane Foams Using Digital Image Correlation. In Proceedingsof ASME International Mechanical Engineering Congress and Exposi-tion, Orlando, Florida, USA, November 2005.

[37] Jidong Kang, David S. Wilkinson, Mukesh Kumar Jain, and Raja K.Mishra. Three-Dimensional Structure of Portevin-Le Chatelier Bandsand Shear Bands in Strip Cast AA5754 Sheets Using Digital ImageCorrelation. In Proceedings of Society of Automotive Engineers (SAE)World Congress - SAE Technical Paper in SP-2094, Detroit, Michigan,USA, April 2007.

[38] L. Kehoe, V. Guenebaut, and P. V. Kelly. Measurement of deforma-tion and strain in flip chip on BGA (FC-BGA). In Proceedings of 54thElectronic Components and Technology Conference, June 2004.

[39] L. Kehoe, P. Lynch, and V. Guenebaut. Measurement of Deformationand Strain in First Level C4 Interconnect and Stacked Die using OpticalDigital Image Correlation. In Proceedings of 56th Electronic Componentsand Technology Conference, June 2006.

[40] Jurgen Keller, Astrid Gollhardt, Dietmar Vogel, and Bernd Michel.Characterization of microcracks by application of digital image corre-lation to SPM images. In Norbert Meyendorf, George Y. Baaklini, and

48

Bernd Michel, editors, SPIE Proceedings of Testing, Reliability, and Ap-plication of Micro- and Nano-Material Systems II, volume 5392, pages43–53, San Diego, CA, USA, 2004.

[41] Jurgen Keller, Astrid Gollhardt, Dietmar Vogel, and Bernd Michel.Nanoscale deformation measurements for reliability analysis of sensors.In Norbert Meyendorf, George Y. Baaklini, and Bernd Michel, editors,SPIE Proceedings of Advanced Sensor Technologies for NondestructiveEvaluation and Structural Health Monitoring, volume 5770, pages 160–167, San Diego, California, USA, 2005.

[42] D. Lecompte, S. Bossuyt, S. Cooreman, H. Sol, and J. Vantomme.Study of speckle patterns for DIC. In Proceedings of 3rd Workshopon Optical Measurement Techniques for Structures and Systems (OP-TIMESS’2007), Leuven, Belgium, May 2007.

[43] D. Lecompte, H. Sol, J. Vantomme, and A. Habraken. Analysis ofspeckle patterns for deformation measurements by digital image correla-tion. In Pierre Slangen and Christine Cerruti, editors, SPIE Proceedingsof Speckle06 Conference, volume 6341, Nımes, France, 2006.

[44] M. Li, J. Zhang, Chun-Yang Xiong, J. Fang, Y. Hao, and M. P. Wen.Fracture analysis of plastic-bonded explosive by digital image correlationtechnique. In Xiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke,editors, SPIE Proceedings of Third International Conference on Exper-imental Mechanics, volume 4537, pages 107–110, Beijing, China, 2002.

[45] L. Liu and E. F. Morgan. The accuracy and precision of digital imagecorrelation in quantifying local 3-D strains in trabecular bone dependon trabecular architecture. In Proceedings of 5th World Congress ofBiomechanics, Munich, Germany, July 2006.

[46] H. Lu and B. Ganesan. Implementation of Third-order DisplacementGradient in Digital Image Correlation. In Proceedings of the 2002 Inter-national Conference on Computational Engineering & Sciences, Reno,Nevada, USA, August 2002.

[47] Kenji Machida and Kensaku Morita. Elastic-plastic stress analysis nearthe crack tip by the 2-dimensional elastic-plastic hybrid method anddigital image correlation. In Chenggen Quan, Fook Siong Chau, AnandAsundi, Brian Stephen Wong, and Chwee Teck Lim, editors, SPIE Pro-ceedings of Third International Conference on Experimental Mechanics

49

and Third Conference of the Asian Committee on Experimental Mechan-ics, volume 5852, pages 614–620, Singapore, 2005.

[48] A. Mahajan, A. Pilch, and T. Chu. Intelligent image correlation using ge-netic algorithms for measuring surface deformations in the autonomousinspection of structures. In Proceedings of the 2000 American ControlConference, June 2000.

[49] T. Marin, G. Nicoletto, E. Romeo, and R. Roncella. Determinationof elastic-plastic strains by digital image correlation. In Proceedings ofPhotomechanics 2006, Clermont-Ferrand, France, 2006.

[50] M. Martinez, G. Renaud, D. Backman, M. Genest, and M. Delannoy.Demonstration of an instrumented patch. In Kara J. Peters, editor, SPIEProceedings of Sensor Systems and Networks: Phenomena, Technology,and Applications for NDE and Health Monitoring, volume 6530, SanDiego, California, USA, 2007.

[51] N. McCormick, J. Lord, and A. Ive. Towards a fully validated digi-tal image correlation system. In Proceedings of Photomechanics 2006,Clermont-Ferrand, France, 2006.

[52] Stephen R. McNeill, Michael A. Sutton, and Samuel S. Russell. Deter-mination of high temperature strains using a PC based vision system. InProceedings of the 1992 NASA Langley Measurement Technology Con-ference: Measurement Technology for Aerospace Applications in High-Temperature Environments, pages 237–243, 1992.

[53] Bernd Michel, Jurgen Keller, and Hans Walter. Nanoscale deformationmeasurements to improve reliability assessment of sensors and MEMS.In Norbert Meyendorf, George Y. Baaklini, and Bernd Michel, editors,SPIE Proceedings of Advanced Sensor Technologies for NondestructiveEvaluation and Structural Health Monitoring II, volume 6179, pages129–136, San Diego, CA, USA, 2006.

[54] E. Montemayor and R. P. Ray. Displacement Measurements for CyclicTriaxial Tests Using Digital Image Correlation. In Paul W. Mayne,Ellen Rathje, Jason DeJong, Amy Rechenmacher, Jerry Yamamuro,Sunil Sharma, and Clinton Willson, editors, Site Characterization andModeling (GSP 138), volume 164, Austin, Texas, USA, 2005. ASCE.

[55] A. Montepara, E. Romeo, R. Roncella, and G. Tebaldi. Local straininhomogeneity in hot mix asphalt by digital image correlation. In Pro-ceedings of Photomechanics 2006, Clermont-Ferrand, France, 2006.

50

[56] D. R. Mumm, W. L. Morris, M. S. Dadkhah, and B. N. Cox. Subcrit-ical Crack Growth in Ceramic Composites at High Temperature Mea-sured Using Digital Image Correlation. In M. G. Jenkins, S. T. Gonczy,E. Lara-Curzio, N. E. Ashbaugh, and L. P. Zawada, editors, Thermaland Mechanical Test Methods and Behavior of Continuous-Fiber Ce-ramic Composites. ASTM STP 1309, 1997.

[57] L. K. Nait-Ali, A.-S. Caro-Bretelle, P. Ienny, L. Ferry, and A. Bergeret.Study of the dissipative behavior in reprocessed pet by image correla-tion. In Proceedings of Photomechanics 2006, Clermont-Ferrand, France,2006.

[58] G. Nicoletto, G. Anzelotti, E. Riva, and R. Roncella. Mesomechanicstrain fields in woven composites: experiments vs. FEM modeling.In Proceedings of 3rd Workshop on Optical Measurement Techniquesfor Structures and Systems (OPTIMESS’2007), Leuven, Belgium, May2007.

[59] G. Nicoletto, P. Baicchi, and R. Roncella. Heterogeneous elasto-plasticstrain mapping using microscopic visualization and digital image corre-lation. In Proceedings of 3rd Workshop on Optical Measurement Tech-niques for Structures and Systems (OPTIMESS’2007), Leuven, Bel-gium, May 2007.

[60] J.-J. Orteu, D. Garcia, L. Robert, and F. Bugarin. A Speckle-TextureImage Generator. In Pierre Slangen and Christine Cerruti, editors, SPIEProceedings of Speckle06 Conference, volume 6341, Nımes, France, 2006.

[61] Jean-Jose Orteu. Digital Image Correlation Error Assessment. In Pro-ceedings of SEM 2007 Annual Conference on Experimental and AppliedMechanics, Springfield, Massachusetts, USA, June 2007.

[62] Bing Pan, Peng Cheng, and Boqin Xu. In-plane displacements measure-ment by gradient-based digital image correlation. In Chenggen Quan,Fook Siong Chau, Anand Asundi, Brian Stephen Wong, and Chwee TeckLim, editors, SPIE Proceedings of Third International Conference on Ex-perimental Mechanics and Third Conference of the Asian Committee onExperimental Mechanics, volume 5852, pages 544–551, Singapore, 2005.

[63] J. H. L. Pang, X. K. Zhang, Q. J. Liu, F. X. Che, T. H. Low, X. Q. Shi,and Z. P. Wang. In-situ reliability analysis of solder joint by digital im-age correlation. In Proceedings of 4th Electronics Packaging TechnologyConference, December 2002.

51

[64] Seungbae Park, Ramji Dhakal, Lawrence Lehman, and Eric Cotts. GrainFormation and Intergrain Stresses in a Sn-Ag-Cu Solder Ball. In Pro-ceedings of ASME InterPACK 2005, San Francisco, California, USA,July 2005.

[65] C. Pinna, M. Bornert, J. H. Beynon, and C. M. Sellars. Experimen-tal investigation and micromechanical modeling of the hot deformationof duplex stainless steels. In P. Martins, S. Macewen, Y. Verreman,W. J. Liu, and J. Goldak, editors, Proceedings of Mathematical model-ing in metal processing and manufacturing (CD-ROM, 39th Conferenceof metallurgists), Ottawa, Canada, August 2000.

[66] M. C. Pitter, C. W. See, and M. G. Somekh. Fast subpixel digitalimage correlation using artificial neural networks. In Proceedings ofInternational Conference on Image Processing, October 2001.

[67] Sailesh Pradhan and T. C. Chu. Tensile Test Apparatus for Micro-ScaleSpecimens on Scanning Electron Microscope Using Sub-Pixel DigitalImage Correlation. In Proceedings of ASME International MechanicalEngineering Congress and Exposition, Orlando, Florida, USA, Novem-ber 2005.

[68] M. Puyo-Pain and J. Lamon. Determination of elastic properties ofceramic-based joint using l ocal techniques. In Proceedings of 5th Inter-national Conference on High Temperature Ceramic Matrix CompositesHTCMC5, Westerville, Ohio, USA, 2004.

[69] M. Puyo-Pain and J. Lamon. Determination of elastic moduli and Pois-son coefficient of thin silicon-based joint using digital image correlation.In Proceedings of 29th International Conference on advanced Ceramicsand Composites, Cocoa Beach, Florida, USA, 2005.

[70] Yuwen Qin, Baohui Liu, Xin-Hua Ji, and Y. Y. Hung. Applicationof digital-image correlation method to dynamic displacement measure-ments. In Xiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke, ed-itors, SPIE Proceedings of Third International Conference on Experi-mental Mechanics, volume 4537, pages 378–381, Beijing, China, 2002.

[71] D. T Read, Y. W. Cheng, D. Zhang, W. Tong, G. B. Broggiato, andH. W. Schreier. Results of a Mini Round Robin on Digital Image Corre-lation. In Proceedings of SEM 2004 Annual Conference on Experimentaland Applied Mechanics, Costa Mesa, CA, USA, June 2004.

52

[72] Brad Regez, Ying Zhang, Tsuchin Chu, and Ajay Mahajan. In-PlaneDeformation Measurements Using Digital Image Correlation of Ultra-sonic C-Scan Images. In Proceedings of ASME International MechanicalEngineering Congress and Exposition, Washington, D.C, USA, Novem-ber 2003.

[73] L. Robert and J.-J. Orteu. Assessment of Digital Image Correlation Per-formances. In Proceedings of International Conference on ExperimentalMechanics (ICEM13), Alexandroupolis, Greece, July 2007.

[74] Vesna Savic and Louis Hector Jr. Tensile Deformation and Fractureof Press Hardened Boron Steel Using Digital Image Correlation. InProceedings of Society of Automotive Engineers (SAE) World Congress- SAE Technical Paper in SP-2103, Detroit, Michigan, USA, April 2007.

[75] P. L. W. Scheijgrond, D. X. Q. Shi, W. D. van Driel, G. Q. Zhang, andH. Nijmeijer. Digital image correlation for analyzing portable electronicproducts during drop impact tests. In Proceedings of 6th InternationalConference on Electronic Packaging Technology, September 2005.

[76] N. Shishido, T. Ikeda, N. Miyazaki, and Y. Honmachi. Strain mea-surement in the microstructure of advanced electronic packages usingdigital image correlation. In Proceedings of International Symposium onElectronics Materials and Packaging (EMAP 2005), December 2005.

[77] V. Srinivasan, S. Radhakrishnan, X. Zhang, G. Subbarayan, T. Baughn,and L. Nguyen. High Resolution Characterization of Materials Used inPackages Through Digital Image Correlation. In Proceedings of ASMEInterPACK 2005, San Francisco, California, USA, July 2005.

[78] Yaofeng Sun, J. H. L. Pang, Xunqing Shi, and J. W. R. Tew. Ther-mal Deformation Measurement by Digital Image Correlation Method.In Proceedings of The Tenth Intersociety Conference on Thermal andThermomechanical Phenomena in Electronics Systems (ITHERM 06),June 2006.

[79] Yaofeng Sun, Yeow Meng Tan, J. H. L. Pang, and Fei Su. Digital imagecorrelation and its applications in electronics packaging. In Proceed-ings of 7th Electronic Packaging Technology Conference (EPTC 2005),December 2005.

[80] M. A. Sutton, T. L. Chae, J. L. Turner, and H. A. Bruck. Developmentof a Computer Vision Methodology for the Analysis of Surface Deforma-tions in Magnified Images. In George F. Vander Voort, editor, MiCon

53

90: Advances in Video Technology for Microstructural Control, pages109–132. ASTM STP 1094, 1991.

[81] M. A. Sutton, W. Zhao, S. R. McNeill, J. D. Helm, R. S. Piascik, andW. T. Riddell. Local Crack Closure Measurements: Development ofa Measurement System Using Computer Vision and a Far-Field Micro-scope. In Advances in Fatigue Crack Closure Measurement and Analysis,pages 145–156, West Conshohocken, PA, USA, November 1997. ASTMSTP 1343.

[82] A. R. Tolat, S. R. McNeill, and M. A. Sutton. Effects of contrast andbrightness on subpixel image correlation. In Proceedings of the Twenty-Third Southeastern Symposium on System Theory, March 1991.

[83] John L. Turner, Samuel S. Russell, and Michael A. Sutton. Applicationof digital image analysis to strain measurement of elevated temperature.In Proceedings of the Conference on Hostile environments and high tem-perature measurements, pages 31–34, Kansas City, MO, USA, November1989.

[84] S. Vanlanduit, J. Vanherzeele, R. Longo, and P. Guillaume. A digitalimage correlation method for fatigue test experiments. In Proceedingsof 3rd Workshop on Optical Measurement Techniques for Structures andSystems (OPTIMESS’2007), Leuven, Belgium, May 2007.

[85] Dietmar Vogel, Jurgen Keller, Astrid Gollhardt, and Bernd Michel. De-formation field measurement on micro and nanotechnology componentsutilizing SFM and FIB equipment. In Chenggen Quan, Fook SiongChau, Anand Asundi, Brian Stephen Wong, and Chwee Teck Lim, ed-itors, SPIE Proceedings of Third International Conference on Exper-imental Mechanics and Third Conference of the Asian Committee onExperimental Mechanics, volume 5852, pages 302–308, Singapore, 2005.

[86] Dietmar Vogel, Jurgen Keller, and Bernd Michel. Characterization ofmaterials with nanoscopic filler particles by AFM techniques. In Nor-bert Meyendorf, George Y. Baaklini, and Bernd Michel, editors, SPIEProceedings of Testing, Reliability, and Application of Micro- and Nano-Material Systems II, volume 5392, pages 148–157, San Diego, CA, USA,2004.

[87] Dietmar Vogel, Jurgen Keller, and Bernd Michel. High-resolution stressmeasurements for microsystem and semiconductor applications. InChristophe Gorecki, Anand K. Asundi, and Wolfgang Osten, editors,

54

SPIE Proceedings of Optical Micro- and Nanometrology in MicrosystemsTechnology, volume 6188, Strasbourg, France, 2006.

[88] Dietmar Vogel, Daniel Lieske, Astrid Gollhardt, Jurgen Keller, NeusSabate, Joan Ramon Morante, and Bernd Michel. FIB based measure-ments for material characterization on MEMS structures. In Robert E.Geer, Norbert Meyendorf, George Y. Baaklini, and Bernd Michel, edi-tors, SPIE Proceedings of Testing, Reliability, and Application of Micro-and Nano-Material Systems III, volume 5766, pages 60–69, San Diego,California, USA, 2005.

[89] Dietmar Vogel, Neus Sabate, Astrid Gollhardt, Jurgen Keller, JuergenAuersperg, and Bernd Michel. FIB-based measurement of local resid-ual stresses on microsystems. In Robert E. Geer, Norbert Meyendorf,George Y. Baaklini, and Dietmar W. Vogel, editors, SPIE Proceedingsof Testing, Reliability, and Application of Micro- and Nano-MaterialSystems IV, volume 6175, San Diego, CA, USA, 2006.

[90] Cong-Shun Wang, Chun-Yang Xiong, Sheng Chang, Jing Fang, andZhi-Hong Li. Testing and simulation of comb-driven MEMS relay byapplying digital image correlation technology. In Proceedings of IEEESensors, June 2002.

[91] Cong-Shun Wang, Weibin Zhang, Chunyang Xiong, and Jing Fang. Ex-periment and simulation study of instability of a novel electrostaticMEMS relay. In Xiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke,editors, SPIE Proceedings of Third International Conference on Exper-imental Mechanics, volume 4537, pages 430–433, Beijing, China, 2002.

[92] A. Willems, D. Vandepitte, and S. V. Lomov. Drape-ability characteriza-tion of textile composite reinforcements using digital image correlation.In Proceedings of 3rd Workshop on Optical Measurement Techniquesfor Structures and Systems (OPTIMESS’2007), Leuven, Belgium, May2007.

[93] Thomas Wolf, Bernd Gutmann, and H. Weber. Three-dimensional dis-placement analysis by projected fringes and speckle correlation. InRyszard J. Pryputniewicz, Gordon M. Brown, and Werner P. Jueptner,editors, SPIE Proceedings of Laser Interferometry VIII: Applications,volume 2861, pages 72–84, Denver, CO, USA, 1996.

[94] B. Wunderle, E. D. Dermitzaki, J. Keller, D. Vogel, and B. Michel.Fracture mechanical characterization of micro- and nano-filled polymers

55

by a combined experimental and simulative procedure. In Proceedingsof 4th IEEE Conference on Nanotechnology, August 2004.

[95] Dongmei Xing, Hong-Qi Li, Zhi Wang, Jingwei Tong, and Shibin Wang.New digital-image correlation method and its application. In XiaopingWu, Yuwen Qin, Jing Fang, and Jingtang Ke, editors, SPIE Proceedingsof Third International Conference on Experimental Mechanics, volume4537, pages 378–381, Beijing, China, 2002.

[96] Lianyun Xu, Zhende Hou, and Yuwen Qin. The measurement of theYoung’s modulus of thin or flexible specimen with digital-image correla-tion method. In Xiaoping Wu, Yuwen Qin, Jing Fang, and Jingtang Ke,editors, SPIE Proceedings of Third International Conference on Exper-imental Mechanics, volume 4537, pages 406–409, Beijing, China, 2002.

[97] Eunice Yang, Mary I. Frecker, Eric M. Mockensturm, and Danielle Wu.Analytical model and experimental characterization of a dielectric elas-tomer annulus actuator undergoing large quasi-static deformation. InAlison B. Flatau, editor, SPIE Proceedings of Smart Structures and Ma-terials 2004: Smart Structures and Integrated Systems, volume 5390,pages 183–193, San Diego, CA, USA, 2004.

[98] Satoru Yoneyama, Akikazu Kitagawa, Koji Kitamura, and HisaoKikuta. Deflection distribution measurement of steel structure usingdigital image correlation. In Leonard M. Hanssen and Patrick V. Far-rell, editors, SPIE Proceedings of Optical Diagnostics, volume 5880, SanDiego, CA, USA, 2005.

[99] CanLin Zhou and Yi-Lan Kang. Improved digital speckle correlationmethod and its application. In Yun-Jiang Rao, Osuk Y. Kwon, andGang-Ding Peng, editors, SPIE Proceedings of Advanced Sensor Systemsand Applications II, volume 5634, pages 827–834, Beijing, China, 2005.

Collection of articles

[1] P. Aschwanden and W. Guggenbul. Experimental results from a compar-ative study on correlation-type registration algorithms. In W. Forstnerand S. Ruwiedel, editors, Robust Computer Vision: Quality of Vision Al-gorithms, pages 268–289. Wichmann Verlag, Karlsruhe, Germany, March1992.

56

[2] K. D. Hinsch, G. Gulker, H. Hinrichs, and H. Joost. Artwork Monitoringby Digital Image Correlation. In Klaus Dickmann, Costas Fotakis, andJohn F. Asmus, editors, Lasers in the Conservation of Artworks, volume100 of Springer Proceedings in Physics, pages 459–467. Springer BerlinHeidelberg, 2005. ISBN 978-3-540-22996-4.

[3] Bjorn Kemper, Patrik Langehanenberg, Sabine Knoche, and Gert vonBally. Combination of Digital Image Correlation Techniques and SpatialPhase Shifting Interferometry for 3D-Displacement Detection and NoiseReduction of Phase Difference Data. In Wolfgang Osten, editor, Fringe2005, pages 221–225. Springer Berlin Heidelberg, 2006.

[4] S. Mguil-Touchal, F. Morestin, and M. Brunet. Various experimental ap-plications of digital image correlation method. In C. A. Brebbia, P. Anag-nostopoulos, and G. M. Carlomagno, editors, Computational Methods inExperimental Measurements VIII, Modelling and Simulation volume 17,pages 45–58. WIT Press, 1997.

[5] M. A. Sutton. Digital image correlation. In W. Sharpe, editor, Handbookof Experimental Solid Mechanics. Springer, 2008. SBN: 978-0-387-30877-7.

[6] M. A. Sutton, S. R. McNeill, J. D. Helm, and Y. J. Chao. Advances inTwo-Dimensional and Three-Dimensional Computer Vision. In P. K. Ras-togi, editor, Photomechanics, Topics in Applied Physics. Springer Verlag,Berlin, 2000.

[7] M. A. Sutton, S. R. McNeill, J. D. Helm, and H. W. Schreier. Computervision applied to shape and deformation measurement. In P. K. Rastogiand D. Inaudi, editors, Trends in Optical Nondestructive Testing andInspection. Elsevier Science, 2000.

[8] Michael Sutton, Stephen McNeill, Helm Jeffrey, and Michael Boone. Mea-surement of Crack Tip Opening Displacement and Full-field DeformationsDuring Fracture of Aerospace Materials Using 2D and 3D Image Correla-tion Methods. In Alexis Lagarde, editor, IUTAM Symposium on AdvancedOptical Methods and Applications in Solid Mechanics, volume 82 of SolidMechanics and Its Applications, pages 571–580. Springer Netherlands,1998.

[9] J.-F. Witz, F. Hild, S. Roux, and J.-B. Rieunier. Mechanical propertiesof crimped mineral wools: Identification from digital image correlation.In H Zhao and N.A Fleck, editors, IUTAM Symposium on Mechanical

57

Properties of Cellular Materials, volume 12 of IUTAM Bookseries, pages135–147. Springer Netherlands, 2007.

Ph.D. theses

[1] Sandra Bergonnier. Relations entre microstructure et proprietesmecaniques de materiaux enchevetres. PhD thesis, Universite Pierreet Marie Curie Paris 6, December 2005.

[2] Patrice Clerc. Mesure de champs de deplacements et de deformationspar stereovision et correlation d’images numeriques. PhD thesis, INSALyon, France, December 2001.

[3] Pascal Doumalin. Microextensometrie locale par Correlation d’ImagesNumeriques. PhD thesis, Ecole Polytechnique, France, June 2000.

[4] Dorian Garcia. Mesure de formes et de champs de deplacements tridi-mentionnels par stereo-correlation d’images. PhD thesis, Institut Na-tional Polytechnique de Toulouse, France, December 2001.

[5] Huiqing Jin. New metrological techniques for mechanical characteriza-tion at the microscale and nanoscale. PhD thesis, University of Mary-land, College Park, MD, USA, May 2004.

[6] Jurgen Keller. Micro- and Nanoscale Characterization of Polymeric Ma-terials by Means of Digital Image Correlation Techniques. PhD thesis,Lehrstuhl Polymermaterialien at Brandenburg University of TechnologyCottbus and Fraunhofer Institute for Reliability and Micro Integration(IZM), Berlin, May 2005.

[7] Felix Latourte. Identification des parametres d’une loi elastoplastique dePrager et calcul de champs de contrainte dans des materiaux heterogenes.PhD thesis, Universite Montpellier 2, December 2007.

[8] David Lecompte. Elastic and Elasto-Plastic Material Parameter Iden-tification by Inverse Modeling of Static Tests using Digital Image Cor-relation. PhD thesis, Vrije Universiteit Brussel – Koninklijke MilitaireSchool, Belgium, March 2007.

[9] Siham Mguil-Touchal. Une technique de correlation directe d’imagesnumeriques : application a la determination de courbes limites de for-mage et proposition d’un critere de striction. PhD thesis, INSA Lyon,France, 1997.

58

[10] Matthieu Puyo-Pain. Comportement mecanique d’assemblages de com-posites 2D SiC/SiC brases par un joint a base-silicium : mesures dechamps par correlation d’images numeriques en conditions extremes.PhD thesis, Universite de Bordeaux I, France, December 2004.

[11] H. W. Schreier. Investigation of Two and Three-Dimensional ImageCorrelation Methods with Applications in Mechanical Engineering. PhDthesis, University of South Carolina, Columbia, USA, September 2003.

[12] Karen Triconnet. Identification des proprietes mecaniques a partir demesures de champs dans un materiau multi-phase. PhD thesis, EcoleNationale Superieure d’Arts et Metiers (ENSAM), June 2007.

[13] Bertrand Wattrisse. Etude cinematique des phenomenes de localisationdans des aciers par intercorrelation d’image. PhD thesis, Universite deMontpellier II, France, 1999.

59