138

REFERENCES

1. Abe T., Tachibana Y., Uematsu T. and Iwamoto M. (1995), ‘Preparation and characterisation of Fe2O3 nanoparticles in mesoporous silicate’, J. Chem. Soc., Chem. Commun., pp. 1617-1618.

2. Alexandridis P., Olsson U. and Lindman B. (1998), ‘A record nine different phases (four cubic, two hexagonal and one lamellar lyotropic liquid crystalline and two micellar solutions) in a ternary isothermal system of an amphiphilic block copolymer and selective solvents (Water and Oil)’, Langmuir, Vol. 14, pp. 2627-2638.

3. Alfredsson V., Keung M., Monnier A., Stucky G. D., Unger K. K. and Schüth F. (1994), ‘High resolution transmission electron microscopy of mesoporous MCM-41 type materials’, J. Chem. Soc., Chem. Commun., pp. 921-922

4. Alliot C., Bion L., Mercier F. and Toulhoat P. (2005), ‘Sorption of aqueous carbonic, acetic and oxalic acid onto -alumina’, J. Colloid Interf. Sci., Vol. 287, pp. 444-451.

5. Armengol E., Cano M.L., Corma A., Garela H. and Navarro M.T. (1995), ‘Mesoporous aluminosilicate MCM-41 as a convenient acid catalyst for Friedel-Crafts alkylation of a bulky aromatic compound with cinnamyl alcohol’, J. Chem. Soc., Chem. Commun., pp. 519-520.

6. Avgul N.N. and Kiselev A.V. (1970), In Chemistry and Physics of Carbon, Walker, P.L.J., Jr., Ed., Marcel Dekker, New York, Vol. 6.

7. Badamali S.K., Sakthivel A. and Selvam P. (2000), ‘Tertiary butylation of phenol over mesoporous H-FeMCM-41’, Catal. Lett., Vol. 65, pp. 153-157.

139

8. Bambrough C.M., Slade R.C.T., Williams R.T., Burkett S.L., Sims S.V. and Mann S. (1998), ‘Sorption of nitrogen, water vapour and benzene by a phenyl-modified MCM-41 sorbent’, J. Colloid Interface Sci., Vol. 201, pp. 220-229.

9. Barrault J., Abdellaoui M., Bouchoule C., Majesste A., Tatibouet J.M., Louloudi A., Papayannakos N. and Gangas N.H. (2000), ‘Catalytic wet peroxide oxidation over mixed (Al–Fe) pillared clays’, Appl. Catal. B-Environ., Vol. 27, pp. L225-L230.

10. Barrett E.P., Joyner L.G. and Halenda P.P. (1951), ‘The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms’, J. Am. Chem. Soc., Vol. 73, pp. 373-380.

11. Beck J.S. (1991), ‘Method for synthesising mesoporous material’, US Patent 5057296.

12. Beck J.S., Chu C. T-W., Johnson I.D., Kresge C.T., Leonowicz M.E., Roth W.J. and Vartuli J.C. (1991), WO patent, 91/11390.

13. Beck J.S., Vartuli C., Roth W.J., Leonowicz M.E., Kresge C.T., Schmit K.D., Chu C.T.W., Olson D.H., Sheppard E.W., Mc Cullen S.B., Higgins J.B. and Schlenker J.L. (1992), ‘A new family of mesoporous molecular sieves prepared with liquid crystal templates’, J. Am. Chem. Soc., Vol. 114, pp. 10834-10843.

14. Beck J.S., Vartuli J.C., Kennedy G.S., Kresge C.T., Roth W.J. and Schramn S.E. (1994), ‘Molecular or supramolecular templating: defining the role of surfactant chemistry in the formation of microporous and mesoporous sieves’, Chem. Mater., Vol. 6, pp. 1816-1825.

15. Beltran F.J., Rivas F.J. and Montero-de-Espinosa R. (2003), ‘Ozone-enhanced oxidation of oxalic acid in water with cobalt catalysts 1: Homogenous catalytic ozonation’, Ind. Eng. Chem. Res., Vol. 42, pp. 3210-3217.

140

16. Beltran F.J., Rivas F.J. and Montero-de-Espinosa R. (2003a), ‘Ozone-enhanced oxidation of oxalic acid in water with cobalt catalysts 1: Heterogenous catalytic ozonation’, Ind. Eng. Chem. Res., Vol. 42, pp. 3218-3224.

17. Beltran F.J., Rivas F.J. and Montero-de-Espinosa R. (2004), ‘A TiO2/Al2O3 catalyst to improve the ozonation of oxalic acid in water’, Appl. Catal. B- Environ., Vol. 47, pp. 101-109.

18. Bergers P.J.M. and de Groot A.C. (1994), ‘The analysis of EDTA in water by HPLC’, Wat. Res., Vol.28, pp.639-642.

19. Biz S. and Occelli M.L. (1998), ‘Synthesis and characterization of mesostructured materials’, Catal. Rev. Sci. Eng., Vol. 40, pp. 329-407.

20. Biz S. and White M.G. (1999), ‘Syntheses of aluminosilicate meso structures with high aluminium content’, J. Phys. Chem.B, Vol.103, pp. 8432-8442.

21. Boehm H.P. (1966), In Advances in Catalysis, Academic Press, New York, Vol. 16.

22. Borade R.B. and Clearfield A. (1995), ‘Synthesis of aluminium rich MCM-41’, Catal. Lett., Vol. 31, pp. 267-272.

23. Bordiga S., Buzzoni R., Geobaldo F., Lambesrti G., Giametto E., Zecchina A., Petrini G., Tozzola G. and Valaic G. (1996), ‘Structure and reactivity of framework and extraframework iron in Fe-silicate as investigated by spectroscopic and physicochemical methods’, J. Catal., Vol. 158, pp. 486-501.

24. Bowers A.R. and Huang C.P. (1985), ‘Adsorption Characteristics of polyacetic aminoacids onto hydrous -Al2O3’, J. Colloid Interf. Sci., Vol. 106, pp. 197-215.

25. Branton P.J., Hall P.G. and Sing K.S.W. (1993), ‘Physorption of nitrogen and oxygen by MCM-41 a model mesoporous adsorbent’, J. Chem. Soc., Chem. Commun., pp. 1257-1258.

141

26. Branton P.J., Hall P.G., Sing K.S.W., Reichert H., Schuth F. and Unger K.K. (1994), ‘Physorption of argon, nitrogen, and oxygen by MCM-41: A model mesoporous adsorbent’, J. Chem. Soc., Faraday Trans., Vol. 90, pp. 2965-2967.

27. Branton P.J., Hall P.G., Treguer M. and Sing K.S.W. (1995), ‘Adsorption of carbon dioxide, sulphurdioxide and water vapour by MCM-41, a model mesoporous adsorbent’, J. Chem. Soc., Faraday Trans., Vol. 91, pp. 2041-2043.

28. Brauch H.J. and Schullerer S. (1987), ‘Behaviour of ethylenediaminetetraacetate (EDTA) and nitrilotriacetate (NTA) in drinking water treatement’, Vom Wasser, Vol. 69, pp.155-164.

29. Brown J., Richer R. and Mercier L. (2000), ‘One step synthesis of high capacity of mesoporous Hg2+ adsorbents by nonionic surfactant assembly’, Micropor. Mesopor. Mat., Vol. 37, pp. 41-48.

30. Bull L.M., Kumar D., Millar S.P., Besier T., Janicke M., Stucky G.D. and Chmelka B.F. (1994), ‘An in-situ X-ray and NMR study of the formation of layered mesophase materials’, Stud. Surf. Sci. Catal., Vol. 84, pp. 429-434.

31. Cauvel A., Brunel D., Di Renzo F., Garrone E. and Fubini B. (1997), ‘Hydrophobic and hydrophilic behaviour of micelle-templated mesoporous silica’, Langmuir, Vol. 13, pp. 2773-2778.

32. Centi C., Perathorier S., Torre T. and Verduna M.G. (2000), ‘Catalytic wet oxidation with H2O2 of carboxylic acids on homogeneous and heterogeneous fenton type catalysts’, Catal. Today, Vol. 55, pp. 61-69.

33. Chang H.L., Chun C.M., Aksay I.A. and Shih W.H. (1999), ‘Conversion of flyash into mesoporous aluminosilicate’, Ind. Eng. Chem. Res., Vol. 38, pp. 973-977.

34. Chaudhari K., Das T.K., Chandwadkar A.J. and Sivasankar S. (1999), ‘Mesoporous aluminosilicate of the MCM-41 type: Its catalytic activity in n-Hexane isomerisation’, J. Catal. Vol. 189, pp. 81-90.

142

35. Chen C.-Y., Li H.-X. and Davis M.E. (1993), ‘Studies on mesoporous materials. I. Synthesis and characterisation of MCM-41’, Micropor. Mater. Vol. 2, pp. 17-26.

36. Chen C.-Y., Burkett S.L., Li H.-X. and Davis M.E. (1993a), ‘Studies on mesoporous materials II. Synthesis mechanism of MCM-41’, Microporous Mater., Vol. 2, pp. 27-34.

37. Chen L.Y., Jaenicke S. and Chuah G.K. (1997), ‘Thermal and hydrothermal stability of framework substituted MCM-41 mesoporous materials’, Microporous Mater., Vol. 12, pp. 323-327.

38. Cheng C.F., Zhou W. and Klinoswski J. (1996), ‘Directing the pore-dimensions in the mesoporous molecular sieves MCM-41. Chem. Phys. Lett., Vol. 263, pp. 247-252.

39. Cheng C.F., Zhou W., Park D.H., Klinowski J., Jargreaves M. and Gladden L.F. (1997), ‘Controlling the channel diameter of the mesoporous molecular sieves MCM-41’, J. Chem. Soc. Faraday Trans., Vol. 93, pp. 359-364.

40. Chenite A., Page Y. L. and Sayari, A. (1995), ‘Direct TEM Imaging of Tubules in Calcined MCM-41 Type Mesoporous Materials’ Chem. Mater., Vol. 7, pp. 1015-1019.

41. Chiola V., Ritsko J.E. and Vanderpool C.D. (1971), US patent 3556725.

42. Chitra S., Paramasivam K., Sinha P.K. and Lal K.B. (2004), ‘Ultrasonic treatment of liquid waste containing EDTA’, J. Clean. Prod., Vol. 12, pp. 429-435.

43. Corma A., Fornes V., Navarro M.T. and Perez-Ppariente J. (1994), ‘Acidity and stability of MCM-41 crystalline aluminosilicates’ J. Catal., Vol. 148, pp. 137-144.

44. Corma A., Fornes V. Garcia H. Miranda M.A. and Sabater M.J. (1994a), ‘Highly efficient photoinduced electron transfer with 2,4,6-triphenylpyrylium cation incorporated inside extra large pore zeotype MCM-41’, J. Am. Chem. Soc., Vol. 116, pp. 9767-9768.

143

45. Corma A., Martinez A., Martinez-Soria V. and Montion J.B. (1995), ‘Hydrocracking of vacuum gasoil on the novel mesoporous MCM-41 aluminosilicates catalysts’, J. Catal., Vol. 153, pp. 25-31.

46. Corma A. (1997), ‘From microporous to mesoporous molecular sieve materials and their use in catalysis’, Chem, Rev., Vol. 97, pp. 2373-2419.

47. Corma A., Kan Q. Navarro M., Perez-pariente J. and Rey F. (1997), ‘Synthesis of MCM-41 with different pore diameters without addition of auxillary organics’, Chem. Mater., Vol. 9, pp. 2123-2126.

48. Crowther N. and Larachi F. (2003), ‘Iron-containing silicalites for phenol catalytic wet peroxidation’, Appl. Catal. B-Environ., Vol. 46, pp. 293-305.

49. Das T.K., Chaudhari K., Chandwadkar J. and Sivasanker S. (1995), ‘Synthesis and catalytic properties of mesoporous tin silicate molecular sieves’, J. Chem. Soc., Chem. Commun., pp. 2495-2496.

50. Davis M.E. (1992), ‘Zeolite and molecular sieve synthesis’, Chem. Mater., Vol. 4, pp. 756-768.

51. Davis M.E., Saldarriaga C., Montes C., Garces J. and Crowdert C. (1988), ‘A molecular sieve with eighteen-membered rings’, Nature, Vol. 331, pp. 643-730.

52. Derovane D.G., Mestsdagh M. and Vieluoge L. (1974), ‘EPR study of the nature and removal of Iron (III) impurities in ammonium-exchanged NaY-Zeolite’, J. Catal., Vol. 33, pp. 169-175.

53. Deshmukh M.R., Aohala V.A., Belhekar A.A., Kashalkar R.V. and Deshpande N.R. (2004), ‘Adsorption studies on activated charcoal prepared from agricultural wastes’, Asian J. Chem., Vol. 16, pp. 227-232.

54. Dessau R.M., Schlenker J.L. and Higgins J.B. (1990), ‘Framework topology of AlPO4-8: The first 14-ring molecular sieve’ Zeolites, Vol. 10, pp. 522-527.

144

55. Di Renzo F., Cambon H. and Dutartre R. (1997), ‘A 28-year-old synthesis of micelle-templated mesoporous silica’ Micropor. Mater., Vol. 10, pp. 283-286.

56. Ding Z.Y., Frisch M.A., Li L. and Gloyna E.F. (1996), ‘Catalytic oxidation in supercritical water’ Ind. Eng. Chem. Res., Vol. 35, pp. 3257-3279.

57. Dubois M., Gulk-krzywicki Th. and Cabane B. (1993), ‘Growth of silica polymer in a lamellar mesophase’, Langmuir, Vol. 9, pp. 673-680.

58. Echchahed B., Moen A., Nicholson D. and Bonneviot L. (1997), ‘Iron-modified MCM-48 mesoporous molecular sieves’, Chem. Mater., Vol. 9, pp. 1716-1719.

59. Elder K.J., Reynolds P.R., Branton P.J., Trouw F.R. and White J.W.C (1997), ‘Structure and dynamics of hydrogen sorption in mesoporous MCM-41’, J. Chem. Soc., Faraday Trans., Vol. 93, pp. 1667-1670.

60. Engelhardt G. Lohse U.V., Lippmaa E., Taramask M. and Magi M. (1981), Anorg. Allg. Chem., Vol. 482, pp. 49-64.

61. Engelhardt G. and Michel D. (1987), ‘High resolution solid state NMR of silicates and zeolites’, John Wiley and Sons, New York, pp. 67.

62. Estermann M., Mc Cusker L.B., Baerlocher Ch., Merrouche A. and Kessler H. (1991), ‘Synthetic Gallophosphate Molecular Sieves with a 20-Tetrahedral. Atom Pore Opening’, Nature, Vol. 352, pp. 320-323.

63. Fajerwerg K., Foussard J.N., Ferraed A. and Debellefontaine H. (1997), ‘Wet oxidation of phenol by hydrogen peroxide: The key role of pH on the catalytic behaviour of Fe-ZSM-5’, Water Sci. Technol., Vol. 35(4), pp. 103-110

145

64. Falcon M., Fajerweg K., Foussard J.-N., Peuch-Costes E., Maurette M.T. and Debellefontaine H. (1995), ‘Wet oxidation of carboxylic acids with hydrogen peroxide. Wet peroxide oxidation (WPO) process. Optimal ratios and role of Fe:Cu:Mn metals’, Environ. Technol., Vol.16, pp. 501-513.

65. Fauconnier N., Bee A., Roger J. and Pons J.N. (1996), ‘Adsorption of gluconic acids on maghemite particles in aqueous medium, Prog. Coll. Pol. Sci., Vol. 100, pp. 212-216.

66. Faust S.D. and Aly O.M. (1983), ‘Chemistry of water treatment’, Butterworths Publishers, Boston.

67. Fendler J.H. and Fendler E.J. (1975), ‘Catalysis in micellar and macromolecular systems’, Academic press, New york.

68. Feng X., Fryxell F.E., Wang I.Q., Kim A., Liu J. and Komnero K.M. (1997), ‘Functionalised monolayers on ordered mesoporous supports’, Science, Vol. 276, pp. 923-926.

69. Feuston B.P. and Higgins J.B. (1994), ‘Model Structures for MCM-41 Materials: A Molecular Dynamics Simulation’, J. Phys. Chem., Vol. 98, pp. 4459-4462.

70. Firouzi A. Atef F., Oertli A.G., Stucky G.D. and Chmelka B.F. (1997), ‘Alkaline Lyotropic Silicate-Surfactant Liquid Crystals’ J. Am. Chem. Soc., Vol. 119, pp. 3596-3610.

71. Flanigen E.M. (1976), ‘Zeolite chemistry and catalysis’ in Rabo J.A. (ed.), ACS Monograph 171, Washington D.C., pp. 231-241.

72. Flanigen E.M., Khatami H. and Szymanki H.A. (1971), ‘Infrared structural studies of zeolite frameworks’, Adv. Chem. Ser., Vol. 101, pp. 201-229.

73. Franke O., Schuluz-Ekloff G., Rathousky J., Starck J. and Zukal A. (1993), ‘Unusual type of adsorption isotherm describing capillary condensation without hysteresis’, J. Chem. Soc., Chem. Commun. pp. 724-725.

146

74. Fukushima Y. and Inagaki S. (1996), ‘Nano-scale structure control of mesoporous silica ‘, Mater. Sci. Eng. A, Vol. 217-218, pp. 116-118.

75. Fyfe C.A., Gobbi G.C., Hartmann J.S., Klinoski J. and Thomas J.M. (1982), ‘Solid state magic angle spinning aluminium-27 nuclear magnetic resonance studies of zeolites using a 400 MHz high resolution spectrometer’, J. Phys. Chem., Vol. 86, pp. 1247-1250.

76. Garnov A.Y., Gogolev A.V., Shilov V.P., Astafurova L. N. and Krot N.N. (2002), ‘Catalytic decomposition of organic anions in alkaline radioactive waste: EDTA oxidation’, Radiochemistry, Vol. 44, 482-488.

77. Ghiselli G., Jardim W.F., Litter M.I. and Mansilla H.D (2004), ‘Destruction of EDTA using Fenton and photo-Fenton-like reactions under UV-A irradiation’, J. Photoch. Photobio. A, Vol. 167, pp. 39-67.

78. Gokulakrishnan N., Pandurangan A. and Sinha P.K. (2005), ‘Effective uptake of decontaminating agent (citric acid) from aqueous solution by mesoporous and microporous materials: An adsorption process’, Chemosphere (in press).

79. Goldfrab D., Bernardo M., Strohmarier K.G., Vaughan D.E.W. and Thomann H. (1994), ‘Characterisation of iron in zeolites by X-band and Q-band ESR, pulsed ESR, and UV-Visible Spectroscopies’, J. Am. Chem. Soc., Vol. 116, pp. 6344-6353.

80. Gregg S.J. and Sing K.S.W. (1982), ‘Adsorption, surface area and porosity, 2nd Edn., Academic press, London.

81. Grubert G., Hudson M.J., Joyner R.W. and Stockenhuber M. (2000), ‘The room temperature, stoichiometric conversion of N2O to adsorbed NO by Fe-MCM-41 and Fe-ZSM-5’, J. Catal., Vol. 196, pp. 126-133.

147

82. Grun M., Kurganov A.A., Schacht s., Schuth f. and Unger K.K. (1996), ‘Comparision of an ordered mesoporous aluminosilicate, silica, alumina, titania and zirconia in normal-phase High Performance Liquid Chromatography’, J. Chromatogr. A, Vol. 740, pp. 1-9

83. Grun M., Lauer I. and Unger K.K. (1997), ‘The synthesis of micrometer and sub micrometer-size spheres of ordered mesoporous oxide MCM-41. Adv. Mater., Vol. 9, pp. 254-257.

84. Guclu K. and Apak R. (2003), ‘Modeling the adsorption of free and heavy metal complex-bound EDTA onto red mud by a non-electrostatic surface complexation model’, J. Colloid Interf. Sci., Vol. 260, pp. 280-290.

85. Hansen E.W., Schmidt R., Stocker M. and Akporiaye D. (1995), ‘Self-diffusion coefficient of water confined in mesoporous MCM-41 materials determined by 1H nuclear magnetic resonance spin-echo measurements’, Micropor. Mater. Vol. 5, pp. 143-150.

86. He N.Y., Cao J.M., Bao S.C. and Xu Q.H. (1997), ‘Room temperature synthesis of an Fe-containing mesoporous molecular sieve’, Mater. Lett., Vol. 31, pp. 133-136.

87. He N., Bao S. and Xu Q. (1998), ‘Fe-contiaining mesoporous molecular sieves materials: very active Friedel-Crafts alkylation catalysts’ Appl. Catal. A-Gen., Vol. 169, pp. 29-36.

88. He Y. and Seaton N.A. (2003), ‘Experimental and computer simulation studies of the adsorption of ethane, carbon dioxide, and their binary mixtures in MCM-41, Langmuir, Vol. 19, pp. 10132-10138.

89. Helfferich, F., 1962. Ion Exchange Mc Graw Hill Book Company Inc., New York.

90. Herbst J.A., Kresge C.T., Olson D.H., Schmidt K.D., Vartuli J.C. and Wang D.C.I. (1995), US Patent, 5,378,440.

148

91. Hinck M.L., Ferguson J. and Puhaakka J. (1997), ‘Resistance of EDTA and DTPA to aerobic biodegradation’, Wat. Sci. Tech., Vol. 35, pp. 25-31.

92. Hu X., Qiao S., Zhao X.S. and Lu G.Q. (2001), ‘Adsorption of benzene in ink-bottle-like MCM-41’, Ind. Eng. Chem. Res., Vol. 40, pp. 862-867.

93. Huang L., Xiao H. and Ni Y. (2004), ‘Cationic MCM-41: Synthesis, characterisation and sorption behaviour towards aromatic compounds’, Colloid Surface A, Vol. 247, pp. 129-136.

94. Huber C., Moller K. and Bein T. (1994), ‘Reactivity of a trimethyl stannyl molybdenum complex in mesoporous MCM-41’, J. Chem. Soc., Chem. Commun., pp 2619-2620.

95. Huo Q., Margolese D.I., Ciesla U., Demuth D.G., Feng P., Gier T.E., Singer P., Firouzi A., Chmelka B.F., Schuth F. and Stucky G.D. (1994), ‘ Organisation of organic molecules with inorganic molecular species into nanocomposite biphase arrays’, Chem. Mater. Vol. 6, pp. 1176-1191.

96. Huo Q., Margolese D.I., Cielsa U., Feng P., Gier T.E., Sieger P., Leon R., Petroff P.M., Schuth F. and Stucky G.D (1994a), ‘Generalised synthesis of periodic surfactant/inorganic composite materials’, Nature, Vol. 368, pp. 317-321.

97. Huo Q., Margolese D.I. and Stucky G.D. (1996), ‘Surfactant Control of Phases in the Synthesis of Mesoporous Silica-based Materials’, Chem. Mater., Vol.8, pp.1147-1160.

98. IAEA Bull. (2000), ‘Contains a large number of articles related to radioactive waste management’, Vol. 42.

99. IAEA Technical Report Series (1970), ‘Standardisation of radioactive waste categories’, Vol. 101, pp 22.

100. IAEA Technical Report Series (1983), ‘Conditioning of low and intermediate level radioactive waste’, Vol. 222, pp 14.

149

101. IAEA Technical Report Series (1983), ‘Treatment of low and intermediate level liquid radioactive waste’, Vol. 236, pp 62-63.

102. Inagaki S., Fukushima Y. and Kuroda K. (1993) ‘Synthesis of highly ordered mesoporous materials from a layered polysilicate‘, J. Chem. Soc., Chem. Commun. pp. 680-681.

103. Inci I. (2004), ‘Removal of citric acid by activated carbon adsorption’, Asian J. Chem., Vol. 16, pp. 649-653.

104. Jacobs P.A. and Ballmoos R.V. (1982), ‘Framework hydroxyl groups of H-ZSM-5 zeolites’, J. Phys. Chem., Vol. 86, pp. 3050-3052.

105. Jain K.K., Prasad G. and Singh V.N. (1979), ‘Application of flyash instead activated carbon for oxalic acid removal’, J. Chem. Technol. Biot., Vol. 29, pp. 36-38.

106. Janicke M., Kumar D., Stucky G.D. and Chmelka B.F. (1994), ‘Aluminium incorporation in mesoporous molecular sieves’, Stud. Surf. Sci. Catal., Vol. 84, pp.243-250.

107. Jones R.H., Thomas J.M., Chen J., Xu R., Huo Q., Li S. and Chippindale A.M. (1993), ‘Structure of an unusual aluminium phosphate ([Al5P6O24H]2-2[N(C2H5)3H]+ 2H2O) JDF-20 with large elliptical apertures. J. Solid State Chem., Vol. 102, pp. 204-208.

108. Juang R.S. and Chou T.C. (1996), ‘Sorption of citric acid from aqueous solution by macroporous resins containing a tertiary amine equillibria’, Separ. Sci. Technol., Vol. 31, pp. 1409-1425.

109. Katiyar A., Ji L., Smirniotis P.G., Pinto N.G. (2005), ‘Adsorption of bovine serum albumin and lysozyme on siliceous MCM-41’, Micropor. Mesopor. Mat., Vol. 80, pp. 311-320.

110. Khan A.R., Uddin F. and Ahmed S.Z. (2002), ‘Adsorption behaviour of citric from aqueous solutions on activated charcoal’, ‘Pakistan J. Sci. Ind. R., Vol. 45, pp. 82-85.

150

111. Khushalani D., Kuperman A., Ozin G.A., Tanaka G., Garces J., Olken M.M. and Coombs N. (1995), ‘Metamorphic materials-restructing siliceous mesoporous materials’, Adv. Mater. Vol. 7, pp. 842-846.

112. Kiseler A.V. and Lygin V.I. (1992), ‘Infrared spectra of surface compounds and adsorbed substances’, Nauka, Moscow (in Russian).

113. Kloestra R.K. and Van Bekkum H. (1995), ‘Catalysis of the tetrahydropyranylation of alcohols and phenols by the H-MCM-41 mesoporous molecular sieves’ J. Chem. Res. (Symp.), pp. 26-27.

114. Kloetstra R.K. and Van Bekkum H. (1995a), ‘Base and acid catalysis by the alkali containing MCM-41 mesoporous molecular sieves’, J. Chem. Soc., Chem. Commun., pp. 1005-1006.

115. Kolodziejski W., Corma A., Navarro M.T. and Perez-Pariente J. (1993), ‘Solid state NMR study of mesoporous aluminosilicate MCM-41 synthesised on a liquid crystal template’, Solid State Nuclear Magnetic Resonance, Vol. 2, pp. 253-259.

116. Kordis-Krapez M., Abram V., Kac M. and Ferjancic S. (2001), ‘Determination of organic acids in white wines by RP-HPLC’, Food Technol. Biot., Vol.39, pp.93-99.

117. Kosslick H., Landmesser H. and Fricke R. (1997), ‘Acidity of substituted MCM-41 type mesoporous silicates probed by ammonia’, J. Chem. Soc., faraday Trans., Vol. 93, pp. 1849-1854.

118. Kosslick H., Lischke G., Parlitz B., Storek W. and Fricke R. (1999), ‘Acidity and active sites of Al-MCM-41’, Appl. Catal. A-Gen., Vol. 184, pp. 49-60.

119. Koyano K.A. and Tatsumi T. (1996), ‘Synthesis of titanium-containing mesoporous molecular sieves with a cubic structure’, Chem. Commun., pp. 145-146.

151

120. Kozhenikov I.V., Sinnema A., Jansen R.J.J., Pain K. and Van Bekkum H. (1995), ‘New acid catalyst comprising heteropolyacid on a mesoporous molecular sieves MCM-41’, Catal. Lett., Vol. 30, pp. 241-252.

121. Kresge C.T., Leonowicz M.E., Roth W.J., Vartuli C. and Beck J.S. (1992), ‘Ordered mesoporous molecular sieves synthesized by a liquid crystal templating mechanism’, Nature, Vol.359, pp.710-712.

122. Kruk M., Jaroniec M. and Sayari A. (1997), ‘Characterization of MCM-41 using molecular simulation: Heterogeneity effects’, Langmuir, Vol. 13, pp. 1737-1745.

123. Kumar S., Upadhyay S.N. and Upadha Y.D. (1987), ‘Removal of phenols by adsorption on flyash’, J. Chem. Technol. Biot., Vol. 37, pp. 281-290.

124. Kunz A., Peralta-Zamora P. and Duran N. (2001), ‘Hydrogen peroxide assisted photochemical degradation of ethylenediaminetetracetic acid’, Adv. Environ. Res., Vol. 7, pp. 197-202.

125. Lackovic K., Jhonson B.B., Angove M.J. and Wells J.D. (2003), ‘Modeling the adsorption of citric acid onto Muloorina illite and related clay minerals’, J. Colloid Interf. Sci., Vol. 267, pp. 49-59.

126. Lagergren S. (1898) ‘About the theory of so-called adsorption of soluble substances’, Kungliga Svenska Ventenskapsakad Handl., Vol. 24, pp.1-39.

127. Lee C.Y., Pedram E.O. and Hines A.L. (1986), ‘Adsorption of oxalic acid, malic and succinic acids on activated carbon’, J. Chem. Eng. Data, Vol. 31, pp. 133-136.

128. Lee D.-K. and Kim D.-S. (2000), ‘Catalytic wet air oxidation of carboxylic acids at atmospheric pressure’, Catal. Today, Vol. 63, pp. 249-255.

152

129. Li Z.H. and Bowman R.S. (1998), ‘Sorption of perchloroethylene by surfactant-modified zeolite as controlled by surfactant loading’, Environ. Sci. Technol., Vol. 32, pp. 2278-2282.

130. Lind A., Anderson J., Karlsson S., Agren P., Bursain P., Amenitsch H. and Linden M. (2002), ‘Controlled solubilization of toluene by silicate-catanionic surfactant mesophases as studied by in situ and ex situ XRD’, Langmuir, Vol. 18, pp. 1380-1385.

131. Lippmaa E., Magi M., Samason A., Engelhardt G. and Grimma A.R. (1980), ‘Structural studies of silicates by solid-state high resolution 29Si NMR spectroscopy’, J. Am. Chem. Soc., Vol. 12, pp. 4889-4993.

132. Lippmaa E., Magi M., Samason A., Jarmark M. and Engelhardt G (1981), ‘Investigation of the structure of zeolites by solid-state high resolution 29Si NMR spectroscopy’, J. Am. Chem. Soc., Vol. 103, pp. 4992-4996.

133. Llewellyb P.C., Schuth F., Grillet Y., Rouquerol F., Rouquerol J. and Unger K.K. (1995), ‘Water sorption on mesoporous aluminosilicate MCM-41’, Langmuir, Vol. 11, pp. 574-577.

134. Lok B.M., Messina C.A., Lyle Patton R., Gajek R.T., Cannan T.R. and Flanigen E.M. (1984), ‘Silicoaluminophosphate molecular sieves: Another new class of microporous crystalline inorganic solids’, J. Am. Chem. Soc., Vol. 106, pp. 6092-6093.

135. Luan Z., Cheng C.F., Zhou W. and Klinowski J. (1995), ‘Mesopore molecular sieve MCM-41 containing framework aluminium’, J. Phys. Chem. Vol. 99., pp. 1018-1024.

136. Luan Z., He H., Zhou W., Cheng C.F and Klinowski J. (1995a), ‘Effect of structural aluminium on the mesoporous structure of MCM-41’, J. Chem. Soc., Faraday Trans., Vol.91, pp. 2955-2959.

137. Luan Z., Zhou W., Cheng C.F., Zani H. and Klinowski J. (1995b), ‘Thermal stability of structural aluminium in the mesoporous molecular sieve MCM-41’, J. Phys. Chem., Vol.99, pp.10590-10593.

153

138. Marouf-Khelifa K., Khelifa A., Belhakem A., Marouf R., Abdelmalek F. and Addou A. (2004), ‘The adsorption of pentachlorophenol from aqueous solution onto exchanged Al-MCM-41 materials’, Adsorpt. Sci. Technol., Vol. 22, pp. 1-12.

139. Mastikhin V.M. and Zamaraev K.I. (1987), ‘NMR studies of heterogeneous catalysts’, J. Phys. Chem., Vol. 152, pp. 59-80.

140. Matatov-Meytal Y.I. and Sheimtuch M. (1988), ‘Catalytic Abatement of Water Pollutants’, Ind. Eng. Chem. Res., Vol. 37, pp. 309-326.

141. Matsumoto A., Chen H., Tsutsumi K. Grun M. and Unger K. (1999), ‘Novel route in the synthesis of MCM-41 containing framework and its characterisation’, Micropor. Mesopor. Mater., Vol. 32, pp. 55-62.

142. McBain J.W. (1932), ‘The sorption of gases and vapours by solids’, Routledge and Sons, London.

143. Menon V.C. and Komarneni S. (1998), ‘Porous adsorbents for vehicular natural gas storage: A review’, J. Porous Mater., Vol. 5, pp. 43-58.

144. Mercier L. and Pinnavaia T.J. (1997), ‘Access in mesoporous materials: Advantages of uniform pore structure in the design of a heavy metal ion adsorbent for environmental remediation’, Adv. Mater., Vol. 9, pp. 500-503.

145. Mishra V.S., Mahajani V.V. and Joshi J.B. (1995), ‘Wet air oxidation’. Ind. Eng. Chem. Res., Vol. 34. pp. 2-48

146. Mitchell P.C.H. (1991), ‘Zeolite-encapsulated metal complexes: Biomimetic catalyts’, Chem. Ind., pp. 308-310

147. Mokaya R. and Jones W. (1997), ‘Physicochemical characterisation and catalytic activity of primary amine templated aluminosilicate mesoporous catalysts’, J. Catal., Vol. 172, pp. 211-221.

154

148. Muller D., Gessener W., Betrens H.J. and Scheler G. (1981), ‘Determination of the aluminium coordination of aluminium-oxygen compounds by solid state high resolution Al-NMR’, Chem. Phys. Lett., Vol. 79, pp. 59-62.

149. Newman J.M., Treacy M.M.J., Koetsier W.T. and de Gruyter C.B. (1988), ‘Structural characterisation of zeolite Beta’ Proc. Royal Soc. London. A, Vol. 420, pp. 375-405.

150. Nguyen C., Sonwane C.G., Bhatia S.K. and Do D.D. (1998), ‘Adsorption of benzene and ethanol on MCM-41 material’, Langmuir, Vol. 14, pp. 49-52.

151. Nowack B. and Sigg L. (1996), ‘Adsorption of EDTA and metal-EDTA complexes onto Goethite’, J. Colloid Interf. Sci., Vol. 77, pp. 106-121.

152. Occelli M.L., Biz S., Auroux A. and Ray G.J. (1998), ‘Effects of the nature of the aluminium source on the acidic properties of some mesostructured materials’, Micropor. Mesopor. Mater., Vol.26, pp.193-213.

153. Oda H., Kishida M. and Yokokawa C. (1981), ‘Adsorption of benzoic acid and phenol from aqueous solution by activated carbons – effect of surface acidity’, Carbon, Vol. 19, pp. 243-248.

154. Oda H. and Yokokawa C. (1983), ‘Adsorption of aromatic amines and o-substituted derivates of phenol from organic solutions by activated carbons – effect of surface acidity’, Carbon, Vol. 21, pp. 485-489.

155. Ogawa M., Ishikawa H., Kikuchi T. (1998), ‘Preparation of transparent mesoporous silica films by a rapid solvent evaporation methodology’, J. Mater. Chem. Vol. 8, pp. 1783-1786.

156. Oh J.S., Shim W.G., Lee J.W., Kim J.H., Moon H. and Seo G. (2003), ‘Adsorption equilibrium of water vapor on mesoporous materials’, J. Chem. Eng. Data, Vol. 48, pp. 1458-1462.

155

157. Oviedo C., Contreras D., Freer J. and Rodriguez J. (2003), ‘Degradation of Fe(III)-ehtylenediaminetetraacetic acid (EDTA) complex by a catechol-driven fenton reaction’, Fresen. Environ. Bull., Vol. 12, pp. 1323-1327.

158. Ozin G.A. (1992), ‘Nanochemistry: Synthesis in diminishing dimensions’, Adv. Mater. Vol. 10, pp. 612-649.

159. Pauly T.R., Liu Y., Pinnavaia T.J., Billinge S.J.L. and Rieler T.P. (1992), ‘Textural mesoporosity and the catalytic activity of mesoporous molecular sieves with Wormhole framework structures’, J. Am. Chem. Soc., Vol. 121, pp. 8835-8842.

160. Plant L. and Jeff M. (1994), ’ Hydrogen peroxide: a potent force to destroy organics in wastewater ‘, Chem. Eng. (September) EE16-EE20.

161. Puri B.R. (1970), In Chemistry and Physics of Carbon, Walker, P.L., Jr., Ed., Marcel Dekker, New York, Vol. 6.

162. Qiao S.Z., Bhatia S.K. and Nicholson D. (2004), ‘Study of hexane adsorption in nanoporous MCM-41 silica’, Langmuir, Vol. 20, pp. 389-395.

163. Raimondo M., Sinibaldi P.M., De Stefanis A. and Tomlinson A.A.G. (1997), ‘Mesoporous M41S materials in capillary gas chromatography’, Chem. Commun., pp. 1343-1344.

164. Ramdas S. and Klinowski J. (1984), ‘A simple correlation between isotropic 29Si NMR chemical shift and T-O-T angles in zeolite framework’, Nature, Vol. 308, pp. 521-523.

165. Rathore H.S., Sharma S.K. and Agarwal M. (1985), ‘Adsorption of some organic acids on flyash impregnated with hydroxides of Al, Cd, Cu, Fe and Ni’, Environ. Pollut. B, Vol. 10, pp. 249-260.

166. Rathousky J., Zukai A., Franke O. and Schuluz-Ekloff G. (1994), ‘Adsorption on MCM-41 mesoporous molecular sieves. Part 1, Nitrogen isotherms and paramerters of the porous structure’, J. Chem. Soc., Faraday Trans., Vol. 90, pp. 2821-2816.

156

167. Rathousky J., Zukai A., Franke O. and Schuluz-Ekloff G. (1995), ‘Adsorption on MCM-41 meosporous molecular sieves, Part 2, cyclopentane isotherms and their temperature dependance’, J. Chem. Soc., Faraday Trans., Vol. 91, pp. 937-940.

168. Reddy J.S. and Sayari A. (1995), ‘Room temperature synthesis of a highly active vanadium-containing mesoporous molecular sieves, V-HMS’, J. Chem. Soc., Chem. Commun., pp. 2231-2232.

169. Reddy K.M and Song C. (1996), ‘Synthesis of mesoporous zeolites and their application for catalytic conversion of polycyclic aromatic hydrocarbons’, Catal. Today, Vol.31, pp.137-144.

170. Regev O. (1996), ‘Nucleation events during the synthesis of mesoporous materials using liquid crystalline templating’, Langmuir, Vol. 12, pp. 4940-4944.

171. Ribeiro Carrott M.M.L., Candelas A.J.E., Carrott P.J.M., Ravikovitch P.I., Neimark A.V. and Sequeria A.D. (2002), ’Adsorption of nitrogen, neopentane, n-hexane, benzene and methanol for the evaluation of pore sizes in silica grades of MCM-41’, Micropor. Mesopor. Mat., Vol. 47, pp. 323-337.

172. Riley R.G., Zachara J.M. and Wobber F.H. (1992), ‘Chemical contaminants on DOE lands and selection of contaminant mixture for subsurface science research’, DOE/ER-0547T, Department of Energy, U.S.

173. Rozwadowski M., Lezanska M., Wloch J., Erdmann K., Golemblewski R. and Kornatowski J. (2001), ‘Mechanism of adsorption of water, benzene and nitrogen on Al-MCM-41 and effect of coking on the adsorption’, Langmuir, Vol. 17, pp. 2112-2119.

174. Rubio J. and Matijevic E. (1979), ‘Interaction of metal hydrous oxides with chelating agents -I FeOOH-EDTA’, J. Colloid Interf. Sci., Vol. 68, pp. 408-421.

157

175. Rudolf P.R., Saldarriaga C. and Clearfield A. (1986), ‘Preparation and x-ray powder structure solution of a novel aluminium phosphate molecular sieves, (AlPO4)3(CH3)4NOH’, J. Phys. Chem., Vol. 90, pp. 6122-6125.

176. Ryczkowski J. (2000), ‘FT-IR study of the adsorption of some complexones and of EDTA alkaline salts into alumina’, Vib. Spectrosc., Vol. 22, pp. 55-62.

177. Samanta S., Giri S., Sastry P.U., Mai N.K., Manna A. and Bhaumik A. (2003), ‘Synthesis and characterisation of iron-rich highly ordered mesoporous Fe-MCM-41’, Ind. Eng. Chem. Res., Vol. 42, pp. 3012-3018.

178. Sano T., Doi K., Hagimoto H., Wang Z., UozumiT. and Soga K. (1999), ‘Adsorptive separation of methylalumoxane by mesoporous molecular sieves MCM-41’, Chem. Commun., pp. 733-734

179. Sayari A., Danumah C. and Moudrakovski I.L. (1995), ‘Boron-modified MCM-41 mesoporous molecular sieves’, Chem. Mater. Vol. 7, pp. 813-815.

180. Sayari A., Liu P., Kruk M. and Jaronier M. (1997), ‘Characterisation of large pore MCM-41 molecular sieves obtained via hydrothermal restructuring’, Chem. Mater., Vol. 9, pp. 2499-2506.

181. Sayari A., Kruk M., Jaronier M. and Moudrakovski I.L. (1998), ‘New approaches to pore size engineering of mesoporous silicates’, Adv. Mater., Vol. 10, pp. 1376 –1379.

182. Sayari A., Yang Y., Kruk M. and Jaroniec M. (1999), ‘Expanding the pore size of MCM-41 silicas: use of amines as expanders in direct synthesis and post synthesis procedures’, J. Phys. Chem. B., Vol.103, pp.3651-3658.

183. Sayari A., Hamoudi S. and Yang Y. (2005), ‘Applications of pore-expanded mesoporous silica. I. Removal of heavy metal cations and organic pollutants from wastewater’, Chem. Mater., Vol. 17, pp. 212-216.

158

184. Schmidt R., Akporiaye D., Stocker M. and Ellestad O. (1994), ‘Synthesis of Al-containing MCM-41 Materials: Template interaction and removal’, Stud. Surf. Sci. Catal., Vol. 84, pp. 61-68.

185. Schmidt R., Stocker M., Hansen E., Akporiyae D. and Ellestad O.H. (1995), ‘MCM-41: a model system for adsorption studies on mesoporous materials’, Microporous Mater.Vol. 3, pp. 443-448.

186. Schullerer S. and Brauch H.J. (1989), ‘Oxidation and adsorption processes in water containing EDTA and NTA’, Vom Wasser, Vol. 72, pp. 21-29.

187. Schuth F. and Sing K. (2002), J. WeitkampHandbook of Porous Solids, Vol. I-V, Wiley-VCH, Weinheim.

188. Selvaraj M., Pandurangan A., Seshadri K.S., Sinha P.K. and Lal K.B. (2003), ‘Synthesis, characterisation and catalytic application of MCM-41 mesoporous molecular sieves containing Zn and Al’, Appl. Catal. A-Gen., Vol. 242, pp. 347-364.

189. Shilov, V.P., Dzyubenko, V.I., Astafurova L.N. and Krot N.N. (1990), ‘Catalytic decompostion of EDTA by Pt/SiO2’, Zh. Prikl. Khim., Vol. 62, pp. 348-353.

190. Sing K.S.W., Everett D.H., Haul R.A.W., Moscou L., Pierotti R.A., Rouquerol J. and Siemieniewska T. (1985), ‘Reporting physisorption data for gas/solid systems — with special reference to the determination of surface area and porosity’, Pure Appl. Chem., Vol. 57, pp. 603-619.

191. Singh A.K., Singh D.P. and Singh V.N. (1988), ‘ Removal of Zn(II) from water by adsorption on china clay’, Environ. Technol. Lett. Vol. 9, pp. 1153-1162.

192. Sinha P.K., Amalraj R.V. and Krishnasamy V. (1993), ‘Flocculation studies on freshly precipitated Copper ferrocyanide for the removal of Caesium from radioactive liquid waste’, Waste Manag., Vol. 13, pp. 341–350.

159

193. Steel A., Carr S.W. and Anderson M.W. (1994), ‘14N NMR study of surfactant mesopores in the synthesis of mesoporous silicates‘, J. Chem. Soc., Chem. Commun., pp. 1571-1572.

194. Stocker M. (1996), ‘Characterisation of zeolitic materials by solid state NMR state of the art’, Stud. Surf. Sci. Catal., Vol. 102, pp. 141-189.

195. Stucky G.D., Monnier A. Schuth F., Huo Q., Margolese D., Kumar D., Krishnamurty M., Petroff P., Firuozi A., Janicke M. and chmelka B.F. (1994), ‘Molecular and atomic arrays in nano and mesoporous materials synthesis‘, Mol. Cryst. Liq. Cryt., Vol. 240, pp. 187-200.

196. Stucky G.D., Huo Q., Firuozi A. Chmelka B.F., Schacht S., Voigtmartin I.G. and Schuth F., (1997), ‘Direct Synthesis of organic/inorganic composite structures’, Stud. Surf. Sci. Catal., Vol. 105, Elsevier science B.V., Amsterdam, pp. 69-76.

197. Sun Y., Yue Y. and Gao Z. (1997), ‘Synthesis and characterisation of Al-MCM-41 molecular sieves’, Appl. Catal. A-Gen., Vol. 161, pp. 121-127.

198. Takahashi H., Ohba K. and Kikuchi K.-I. (2003), ‘Sorption of di- and tricarboxylic acids by an anion-exchange membrane’, J. membrane sci., Vol. 222, pp. 103-111.

199. Takatsuji W. and Yoshida H. (1998), ‘Adsorption of organic acids on polyaminated highly porous chitosan: Equilibria’, Ind. Eng. Chem. Res., Vol. 37, pp. 1300-1309.

200. Tanev P.T. and Pinnavaia T.J. (1995), ‘A neutral templating route to mesoporous molecular sieves’ Science, Vol. 267, pp. 865-867.

201. Tanev P.T., Chibwe M. and Pinnavaia T.J. (1994), ‘Titanium-containing mesoporous molecular sieves for catalytic oxidation of aromatic compounds, Nature, Vol. 368, pp. 321-323.

160

202. Therien M. and Dallaire R. (1982), ‘Adsorption of oxalic acid on malachite: Influence of a surface and solubility of copper in an aqueous solution’, Can. Metall. Quart., Vol. 21, pp. 367-375.

203. Thomas J.M., Fyfe C.A., Ramdas S., Klindwski J. and Gobbi G.C. (1981), ‘High resolution 29Si nuclear magnetic resonance spectrum of zeolite ZK-4. Its significance in assessing magic angle spinning nuclear magnetic resonance as a structural tool for aluminosilicates’, J. Phys. Chem.. Vol. 86, pp. 3061-3064.

204. Thomas J.M. (1994), ‘The chemistry of crystalline sponges’, Nature, Vol. 368, pp. 289-290.

205. Tucker M.D., Barton L.L., Thomson B.M., Wagener B.M. and Aragon A. (1999), ‘Treatment of waste containing EDTA by chemical oxidation’, Waste Manag., Vol. 19, pp. 477-482.

206. Tuel A. (1999), ‘Modification of mesoporous silicas by incorporation of heteroelements in the framework’, Micropor. Mesopor. Mater., Vol. 27, pp. 151-169.

207. Tuel A., Gontier S. and Teissier R. (1996), ‘Zirconium containng mesoporous silicas: new catalysts for oxidation reactions in the liquid phase’, Chem. Commun. pp. 651-652.

208. Tuel A., Arcon I. and Millet J.M.M. (1998), ‘Investigation of structural iron species in Fe-mesoporous silicas by spectroscopic techniques’, J. Chem. Soc., Faraday Trans., Vol. 94, pp. 3501-

209. Uckawa H. and Kaneko K. (1998), ‘Nanostoichiometric properties of nanoporous iron oxide films’ , J. Phys. Chem. B, Vol. 12, pp 8719-8724.

210. Ulagappan N. and Rao C.N.R (1996), ‘Evidence of supramolecular organisation of alkane and surfactant molecules in the process of forming mesoporous silica’, Chem. Commun., pp. 2759-2760.

211. Ulagappan N. and Rao C.N.R. (1996a), ‘Synthesis and characterisation of the mesoporous chromium silicates, Cr-MCM-41’, Chem. Commun., pp. 1047-1048.

161

212. Ulagappan N., Battaram N., Raju V.N. and Rao C.N.R. (1996), ‘Preparation of lamellar and hexagonal forms of mesoporous silica and zirconia by the neutral amine route: Lamellar-hexagonal transformation in the solid state’, J. Chem. Soc., Chem. Commun., pp.2243-2244.

213. Umamaheswari V., Palanichamy M. and Murugesan V. (2002), ‘Isopropylation of m-cresol over mesoporous Al-MCM-41 molecular sieves’, J. Catal., Vol. 210, pp. 367-374.

214. Vartuli J.C., Schimdt K.D., Kresge C.T., Roth W.J., Leonowicz M.E., McCullen S.B., Hellering S.D., Beck J.S., Schlenker J.L., Olson D.H. and Sheppard E.W. (1994), ‘Effect of Surfactant/Silica Molar Ratios on the Formation of Mesoporous Molecular Sieves’, Inorganic Mimicking of Surfactant Liquid Crystal Phase and Mechanistic Implications’, Chem. Mater., Vol.6, pp.2317-2326.

215. Vartuli J.C., Kresge C.T., Roth W.J., Mc cullen S.B., Beck J.S., Schmidt K.D., Leonowicz M.E., Lutner J.D. and Sheppard E.W. (1995), American Chemical Society Meeting in Anaheim, CA.

216. Vega E.D., Narda G.E. and Ferretti F.H. (2003), ‘Adsorption of citric acid from dilute aqueous solutions by hydroxyapatite’, J. Colloid Interf. Sci., Vol. 268, pp. 37-42.

217. Wandleler R. and Baiker A. (2000), ‘Supercritical fluids; Opportunities in Heterogenous catalysis’, CATTECH, Vol. 4, pp. 128-143.

218. Wang. A and Kabe. T (1999), ‘Fine-tuning of pore size of MCM-41 by adjusting the initial pH of the synthesis mixture’, Chem. Commun., pp.2067-2068

219. Wang Y., Zhang Q., Shishido T. and Takehira K. (2002), ‘Characterisation of iron-containing MCM-41 and its Catalytic Properties in Epoxidation of Styrene with Hydrogen Peroxide’, J. Catal., Vol.209, pp.186-196.

220. Ward J.W. (1976), ‘Zeolite chemistry and catalysis’, in Rabo J.A. (ed.), ACS Monograph 171, Washington D.C.

162

221. Weber W.J., Jr. and Morris J.C. (1963) ‘Kinetics of adsorption on carbon from solution’, J. Sanit. Eng. Div., Am. Soc. Civ. Engrs., Vol. 89 (SA2), pp. 31-59.

222. William J.C., Randy D.C. and Kevin E. O. (1998), ‘Organics in mixed nuclear wastes: gamma-radiolytic degradation of chelating and complexing agents. In: Anthony, P.T., Environmental Applications of Ionizing Radiation’, Publications John Wiley & Sons, New york, pp. 429-449.

223. Wilson E. (1997), ‘Coated mesoporous silica: supersoaker for heavy metals’, Chem.. Eng. News, Vol. 5, pp. 46.

224. Wilson S.T., Lok B.M., Messina C.A., Cannan T.R. and Flanigen E.M. (1982), ‘Aluminophosphate molecular sieves : A new class of microporous crystalline inorganic solids’, J. Am. Chem. Soc., Vol.104, pp.1146-1147.

225. Wingen A., Anastasievic N., Hollnagel A., Werner D. and Schuth F. (2000), ‘Fe-MCM-41 as a catalyst for sulfurdioxide in highly concentrated gases’, J. Catal., Vol. 193, pp. 248-254.

226. Wu C.G. and Bein T. (1994), ‘Conducting carbon wires in ordered, nanomaterials-S channels’, Science, Vo1. 266, pp. 1013-1014.

227. Wu C.G. and Bein T. (1994a), ‘Conducting polyaniline filaments in a mesoporous channel host’, Science, Vol. 264, pp. 1757-1759.

228. Wu C.G. and Bein T. (1994b), ‘Polyaniline wires in oxidant containing mesoporous channels host’, Chem. Mater., Vol. 6, pp. 1109-1112.

229. Wu, C.N., Tsai T.S., Liao C.N. and Chao K.J. (1996), ‘Controlling pore size distribution of MCM-41 by direct synthesis’, Microporous Mater., Vol. 7, pp. 173-185.

230. Xu Y.M., Wang R.S. and Wu F. (1999), ‘Surface characters and adsorption behaviour of Pb(II) onto a mesoporous titanosilicate molecular sieve’, J. Colloid Interf. Sci., Vol. 209, pp. 380-385.

163

231. Yanagisawa T., Shimizu T., Kuroda K. and Kato C. (1990), ‘Preparation of alkyltrimethylammonium kanemite complexes and their conversion to mesoporous materials’, Bull. Chem. Soc. Jpn., Vol. 63, pp. 988-992.

232. Yuan Z.Y., Liu S.Q., Chen T.H., Wang J.Z. and Li H.X. (1995), ‘Synthesis of iron containing MCM-41’, J. Chem. Soc., Chem.. Commun., pp. 973-974.

233. Zhang Q., Wang Y., Itsuki S., Shishido T. and Tatekhira K. (2001), ‘Fe-MCM-41 for selective epoxidation of styrene with hydrogen peroxide’, Chem. Lett., pp. 946-947.

234. Zhao D. and Goldfrab d. (1995), ‘Synthesis of mesoporous manganosilicates: Mn-MCM-41, Mn-MCM-48 and Mn-MCM-L’, J. Chem. Soc., Chem. Commun., pp. 875-876.

235. Zhao X.S., (Max) Lu G.Q. and Millar G.J. (1996), ‘Advances in mesoporous molecular sieve MCM-41’, Ind. Eng. Chem. Res., Vol. 35, pp. 2075-2090.

236. Zhao X.S. and Lu G.Q. (1998), ‘Modification of MCM-41 by surface silylation with trimethylchlorosilane and adsorption study’, J. Phys. Chem. B, Vol. 102, pp. 1556-1563.

237. Zhao D., Yang r., Melosh N. Feng J. Chmelka B.F. and Stucky G.D. (1998), ‘Continours mesoporous silica films with highly ordered large pore structures’, Adv. Mater. Vol. 10, pp. 1380-1385.

238. Zhao X.S., Liu G. and Hu X. (2000), ‘Characterization of the structural and surface properties of chemically modified MCM-41 material’, Micropor. Mesopor. Mat., Vol. 41, pp. 37-47.