112

REFERENCES

Abbott, P. (1987) Co-extrusion recent developments using cooking extruder. Cereal Foods

World, 32: 816-819.

Abdel-Aal, E.S.M., Sosulski, F.W., Adel, A., Shehata, Y., Youssef, M.M. and Bave, J.L.

(1992) Effect of extrusion cooking on the physical and functional properties of wheat,

rice and faba bean blends. LWT- Food Science and Technology, 25: 21-25.

Agbisit, R., Alavi, S., Cheng, E.Z., Herald, T., and Trater, A. (2007) Relationships between

microstructure and mechanical properties of cellular corn starch extrudates. Journal of

Texture Studies, 38(2): 709-719.

Aguilera, J.M. (2006) Structure-property relationships in low moisture products. In: P. Buera,

P. Milford, H. Corti and J. Welti-Chanes, Editors, Water properties of food,

pharmaceutical and biological materials, CRC Press, Boca Raton,

Aguilera, J.M. (2005) Why food microstructure. Journal of Food Engineering, 67: 3–11.

Aguilera, J.M. and Gloria, H. (1997) Determination of oil fried potato products by differential

scanning calorimetry. Journal of Agricultural and Food Chemistry, 45: 781-785.

Altan, A., McCarthy, K.L. and Maskan, M. (2008) Twin-screw extrusion of barley–grape

pomace blends: Extrudate characteristics and determination of optimum processing

conditions. Journal of Food Engineering, 89:24-32.

AOCS, (2004) Official methods of analysis, 5th edn. American oilchemist’s society

Champaign, Illinois, Washington.

113

Babin, P., Della, V., Dendievel, G.R., Lourdin, D. and Salvo, L.(2007) X-ray tomography

study of the cellular structure of extruded starches and its relations with expansion

phenomenon and foam mechanical properties. Carbohydrate Polymers, 68: 329-340.

Badding. S., Huff, H.E. and Hsieh, E. (1995) Processing Parameters and Product Properties

of Extruded Beef with Nonmeat Cereal Binders. LWT- Food Science and Technology,

28: 386-394.

Baixauli, R. andSanz, T. (2007) Influence of the dosing process on the rheological and micro

structural properties of a bakery product. Food Hydrocolloids, 21(2): 230-236.

Bakhru, H. K. (1993) Foods that Heal-The natural way to good health. Orient paper Backs,

Delhi.

Balunkeswar, N., Jose, D., Berrios, J., Joseph, R.P. and Tang, J. (2011) Effect of extrusion

on the antioxidant capacity and color attributes of expanded extrudates prepared from

purple potato and yellow pea flour mixes. Journal of Food Science, 76(6): 873-884

Banerjee, S. and Chakraborty. (2000) Analyzed the shear and thermal effect on extrusion

energy, pressure requirement and viscosity of dough. Journal of Food Science and

Technology, 37(2): 184-187.

Barret, A.H. and Ross (1992) Correlation of extrudate infusibility with bulk properties using

image analysis. Journal of Food Science, 55: 1378-1382.

Barrett, A. H. and Peleg, M. (1992) Extrudate cell structure-texture relationships. Journal of

Food Science, 57(5): 1253–1257.

Bawa, A.S., and Sian, S.P.S. (1987) Effect of method of preservation on the storage quality

of carrot juice. Indian Food Packer, 41(1): 42–46.

114

Beirendonck, K.V. (2001) Batter and coating systems. Food Ingredients and Analysis, 23(1):

26-28.

Bhattacharya, S. and Praksah, M. (1994) Extrusion of blends of rice and chickpea flours: a

response surface analysis. Journal of Food Engineering, 21(3): 315-330.

Bhattacharyya, P., Ghosh, U., Gangopadhyay, H. and Raychaudhuri U. (2006) Physico-

chemical characteristics of extruded snacks prepared from rice (Oryzas sativa L), corn

(Zea mays L) and taro Colocasia esculenta (L) Schott by twin-screw extrusion.

Journal of Scientific and Industrial Research, 65(2):165-168.

Blumenthal, M.M. and Stier, R.F. (1991) Optimization of deep-fat frying operations. Trends

in Food Science and Technology, 2(6): 144-148.

Bockel, V. (1996) Statistical aspects of kinetic modelling for food science problem. Journal

of Food Science, 61(3): 477-486.

Bou, R., Navas, J.A., Tres, A., Codony, R. and Guardiola, F. (2012) Quality assessment of

frying fats and fried snacks during continuous deep fat frying at different large scale

producers. Food Control, 27(1):254-267.

Bouchon, P. and Pyle,L. (2004) Study oil absorption in restructured potato chips. Journal of

Food Science, 69: 115-122.

Bouchon, P., Aguilera, J.M. and Pyle, D.L. (2003) Structure oil-absorption relationships

during deep-fat frying. Journal of Food Science, 68(9): 2711-2712.

Bouchon, P., Hollins, P., Pearson, M., Pyle, D.L. and Tobin, M.J. (2001) Oil distribution in

fried potatoes monitored by infrared microspectroscopy. Journal of Food Science, 66:

918- 923.

115

Brennan, C., Brennan, M., Derbyshire, E. and Tiwari,B. K. (2011) Effects of extrusion on the

polyphenols, vitamins and antioxidant activity of foods. Trends in Food Science and

Technology, 22: 570–575.

Brian, J.L., Brian, E.F. and Kevin, M.K. (2005) Quality comparison of french fry style

potatoes produced by oven heating, immersion frying and controlled dynamic radiant

heating. Journal of Food Processing and Preservation, 28(6): 460-472.

Buchanan, R.A. (1975) Low cost infant foods in Asia. Food Technology in Australia, 27(11):

493-494.

Burdurlu, H.S., Koca, N. and Karadeniz, F. (2006) Degradation of vitamin C in citrus juice

concentrates during storage. Journal of Food Engineering, 74: 211–216.

Camire, M.E., Camire, A. and Krumhar, K. (1990) Chemical and nutritional changes in

foods during extrusion. Critical Reviews in Food Science Nutrition, 30: 35-45.

Carabasa, G. M. and Ibarz-Ribas, A. (2000) Kinetics of colour development in aqueous

glucose systems at high temperatures. Journal of Food Engineering, 44: 181-189

Cavadaa, E., PastorS.R., Drago, R., González, J., Rocío, J., Julio, P., Manuel, A. and

Vioquea, J.(2011) Effects of the addition of wild legumes (Lathyrus annuus and

Lathyrus clymenum) on the physical and nutritional properties of extruded products

based on whole corn and brown rice. Food Chemistry, 128: 961–967.

Chandrasekhar, P.R.and Chattopadhyay, P.K. (1990) Studies on microstructural changes of

parboiled and puffed rice. Journal of Food Processing and Preservation, 14: 27-37.

116

Chantaro, P., Devahastin, S. and Chiewchan, N. (2008) Production of antioxidant high

dietary fibre powder from carrot peels. LWT Food Science Technology, 41: 1987-

1994.

Chanvrier, H., Appelquist, I. A. M, Bird,A.R., Gilbert, E., Htom, A.,Li, Z., Liliford,P.I.,

Lopez-Rbubio, A., Msell, M.K. and Topping, D.L.(2007) Processing of novel

elevated amylase wheats; Functional properties and starch digestibility of extruded

products. Journal of Agricultural Food Chemistry, 55: 10248-10257.

Chau, C. F., Chen, C. H., Lee, M. H., Chau, C. F., Chen, C. H. and Lee, M. H. (2004)

Comparison of the characteristics, functional properties, and in vitro hypoglycemic

effects of various carrot insoluble fiber-rich fractions. LWT-Food Science and

Technology, 37(2): 155-160.

Chauhan, G. S. and Bains, G. S. (1988) Effect of some extruder variables on physico-

chemical properties of extruded rice-legume blends. Food Chemistry, 27(3): 213-224.

Chawangkul and Onanong, N. (2001) Microstructural changes in instant noodles during

production via triple staining and confocal laser scanning microscopy and scanning

electron microscopy. Journal of Food Processing and Preservation, 35(3): 311-317

Chinnaswamy, R., Hanna, M. A. and Zobel, H. F. (1989) Microstructural, physicochemical

and macromolecular changes in extrusion-cooked and retrograded corn starch. Cereal

Food World, 34 (5): 415-422.

Cho, K.Y. and Rizvi, S. S. H. (2009) New generation of healthy snack food by supercritical

fluid extrusion. Journal of Food Processing and Preservation, 34(2): 192-218.

Choi, I.D. and Philips, R.D. (2004) Cellular structure of peanut based extruded snack

products using SEM. Journal of Texture studies, 35: 353-370.

117

Cummings, D.B., Stanley, J.M. and Deman, J.M. (1972) Textural properties and

ultrastructure of an extruded soybean product. Journal of Canadian Institute of Food

science and Technology, 5: 124–128.

Ding, Q., Ainsworth, P., Tucker, G. and Marson, H. (2005) The effect of extrusion conditions

on the physicochemical properties and sensory characteristics of rice-based expanded

snacks. Journal of Food Engineering, 66(3):283-289.

Ding, Q.B., Ainsworth, P., Plonkell, A., Tucker, G. and Marson, H. (2006) The effect of

extrusion conditions on the functional and physical properties of wheat based

expanded snacks. Journal of Food Engineering, 73: 142-148.

Dobraszczyk, B.J., Ainsworth, P., Ibanoglu, S. and Bouchon, P. (2006) Baking, Extrusion

and Frying. In J.G. Brennan (Ed.), Food Processing Handbook, John Wiley and Sons,

USA.

Drake, B. (2006) Food crushing sounds an introductory study. Journal of Food Science,

28(2): 233-241

Dueik, V., Robert, P. and Bouchon, P. (2010) Vacuum frying reduces oil uptake and

improves the quality parameters of carrot crisps. Food Chemistry, 119(3): 1143–1149.

Dueik, V. and Bouchon, P. (2011) Vacuum frying as a route to produce novel snacks with

desired according to quality attributes according to new health trends. Journal of

Food Science, 76: 188-195.

Dueik, V., Moreno, M. and Bouchon, C. P. (2012) Microstructural approach to understand

oil absorption during vacuum and atmospheric frying. Journal of Food Engineering,

111(3): 528-536.

118

Duizer, L. (2001) A review of acoustic research for studying the sensory perception of crisp,

crunchy and crackly textures. Trends in Food Science and Technology, 12: 17–24.

Elisa, L.K., Lewis, K., Hulya, D. and Alavi, S. (2012) Matrix transformation in fiber-added

extruded products Impact of different hydration regimens on texture, microstructure

and digestibility. Journal of Food Engineering, (108): 171–182.

FAO, (2009) Statistics, Food and Agriculture Organisation, Rome,

http://faostat.fao.org/site/339/default.aspx.

FAO, (2011) Statistics, Food and Agriculture Organisation, Rome

http://faostat.fao.org/site/339/default.aspx L.

Faris, D.G. and Singh, U. (1990) Nutrition and Products. In: Nene, Y.L., S.D. Hall and V.K.

Sheila, (Eds.), The Pigeon Pea C.A.B. International Wallingford, Qxan, UK and

International Crops Research Institute for the Semi-Arid Tropics (ICRISAT),

Patancheru, India, pp: 401-433.

Farkas, B.E., Singh, R.P. andRumsey, T.R. (1996) Modelling heat and mass transfer in

immersion frying. Part I: model development. Journal of Food Engineering, 29: 211–

226.

Filipini, M. (2001) Preparation, application and evaluation of functional food additives from

organic residues using carrot pomace and wheat bread as the model system. Bulletin,

Institute for Food Technology, University of Bonn, Bonn.

Fillion, L. and Henry, C.J.K. (1998) Nutrient losses and gains during frying: A review.

International. Journal of Food Sciences and Nutrition, 49(2): 157–168

119

Fontannaz, P., Kilinc, T. and Heudi, O. (2006) HPLC –UV determination of total vitamin C

in a wide range of fortified food products. Food Chemistry, 24: 626–631

Gamble, M.H., Rice, P. and Selman, J.D. (1987). Relationship between oil uptake and

moisture loss during frying of potato slices. International Journal of Food Science

and Technology, 22: 233–241.

Gao, X. and Tan, J. (1996) Analysis of expanded-food texture by image processing. Part II.

Mechanical properties. Journal of Food Process Engineering, 19(4): 445–456

Garayo, J. and Moreira, R. (2002) Vacuum frying of potato chips. Journal of Food

Engineering, 55: 181–191.

Gillespie Brothers Pvt. Limited. (1971)Australian Patent No. 413774.

Grewal, K.S., and Jain, S.C. (1982) Physico-chemical characteristics of carrot juice

beverage. Indian Food Packer, 36(5): 44–47.

Grigelmo, M.N. and Martin-Belloso, O. (1999) Comparison of dietary fibre from by-products

of processing fruits and greens and from cereals. LWT – Food Science and

Technology, 32: 503–508.

Gu, L., House, S.E., Rooney, L.W. and Prior, R.L. (2008) Sorghum extrusion increases

bioavailability of catechins in weanling pigs. Journal of Agricultural Food Chemistry,

56: 1283-1288.

Guha, M., Syed,Z.A. and Bhattacharya, S. (2003) Screening of variables for extrusion of rice

flour employing a Plackett-Burman design. Journal of Food Engineering, 57(2): 135-

144.

120

Gupta, (2003) Mathematical modelling of thin layer solar drying kheer mix. Journal of Food

Science and Technology, 40: 310-312.

Gwiazada, S., Noguchi, A. and Saio, K. (1987) Microstructural studies of texturized

vegetable protein products: Effects of oil addition and transformation of raw materials

in various sections of twin-screw extruder. Food Microstructure, 6(1): 57–61.

Harri, P.L., Cuppet, S.L. and Lee, K.W. (1988) A SEM study of maize gluten meal and soy

extrudates. Cereal Chemistry, 65(3): 228-232.

Hubbard, L.J. and Farkas, B.E. (2000) Influence of oil temperature on convective heat

transfer during immersion frying. Journal of Food Processing and Preservation, 24(2):

143–162.

Iabnoglu, I., Ainsworth, P., Ozer, E.A.and Plunkett, A. (2006) Physical and sensory

evaluation of a nutritionally balanced gluten-free extruded snack. Journal of Food

Engineering 75: 469-472.

Ilker, R. and Szczesniak, A. (1990) Structural and chemical base for texture of plant food

stuffs. Journal of Texture Studies, 21: 1–36.

Jackman, R.L. and Stanley, D.W. (1995) Perspectives in the textural evaluation of plant

foods. Trends in Food Science and Technology, 6: 187-194.

Jean, I.J., Work, R., Camere, M.E., Briggs, J., Barrett, A.H. and Bushway, A.A. (1996)

Selected properties of extruded potato and chicken meat. Journal of Food Science,

61: 783-789.

Jian, K.L., Brian, P.M., Dougherty, P. and Mary, E.C. (2011) Control of lipid oxidation in

extruded salmon jerky snacks. Journal of Food Science 76 (1): 8–13.

121

Jin, Z., Hsiehl, F. and Huff, H. E. (1995) Effects of soy fiber, salt, sugar and screw speed on

physical properties and microstructure of corn meal extrudate. Journal of Cereal

Science, 22(2): 185-194.

Kadan, R.S., Bryant, R. J. and Pepperman, A.B. (2003) Functional properties of extruded

rice flours. Journal of Food Science, 68: 1669-1672.

Kalra, C.L., Kulkarni, S.G. andBerry, S.K. (1987) The carrot (Daucus carota L.) – a most

popular root vegetable. Indian Food Packer, 46–73.

Kaur,S., Sarkar B.C., Sharma H. K. and Singh, C. (2009) Response surface optimization of

conditions for the clarification of guava fruit juice using commercial enzyme.Journal

of Food Process Engineering, 34(4): 1298-1398

Khare, R.N., Krishnamurthy, K.and Pingle, S. V. (1966) Milling losses of food grains –

studies on losses of pigeon-pea during milling. Bull Grain Technology, 4, 125.

Kim, C.H., Maga, J.A.,and Martin, J.T. (1989) Properties of extruded dried distiller grains

and flour blends. Journal of Food Processing and Preservation, 13(3): 219-231.

Kokini J.L., Chang C. and Lei L.(1992) The role of rheological properties on extrudate

expansion In:Kokini, J., Ho, C. and Karwe, M. (eds), Food Extrusion science and

Technology. Marcel Dekker, New York, PP631-653.

Kong, J., Perkins, L.B., Dougherty, M.P. and Camire, M.E. (2011) Control of lipid oxidation

in extruded salmon jerky Snacks. Journal of Food Science, 76: 8–13.

Kumar, N., Sarkar, B.C. and Sharma, H.K. (2010b) Development and characterization of

extruded product using carrot pomace and rice flour. International Journal of Food

Engineering, 6: 1-24.

122

Kumar, N., Sarkar, B.C. and Sharma, H.K. (2011) Effect of air velocity on kinetics of thin

layer carrot pomace drying. Food Science and Technology International, 17:459-469.

Kumar, N., Sarkar, B.C. and Sharma, H.K. (2012) Mathematical modelling of thin layer hot

air drying of carrot pomace. Journal of Food Science and Technology, 49: 33-41.

Kumar, N., Sarkar,B. and Sharma,H.K. (2010) Development and characterization of

extruded product of carrot pomace, rice flour and pulse powder. African Journal of

Food Science, 4(11): 703-717.

Kumar, N., Sarkar, B.C. and Sharma, H.K. (2012) Colour kinetics and storage characteristics

of carrot, pulse and rice by-product based extrudates. British Food Journal, 114(9):

1279-1296.

Kumari, S. and Grewal, R.B. (2007) Nutritional evaluation and utilization of carrot pomace

for preparation of high fiber biscuits. Journal of Food Science and Technology, 44:

56–58.

Kurien, P.P. and Parpia, H.A.B. (1968) Pulse milling in India. I. Processing and milling of

tur (Cajanus cajan Linn.). Journal of Food Science and Technology, 5: 203-207.

Kyi, H., Mruthunjaya, Khan, N.A., Rupasena, L. and Bottema, J.W.T. (1997)Market

Prospects for Pulses in South Asia: International and Domestic Trade. Working Paper

27, The CGPRT Centre, Bogor, Indonesia, 101p.

Lasekan, O.O., Lasekan, W., Idowu, M. A. and Ojo, O. A.(1996) Effect of extrusion cooking

on the nutritional value, storage stability and sensory characteristics of a maize-based

snack food. Journal of Cereal Science, 24: 79-85.

123

Lazou, A. and Krokida, M. (2010) Structural and textural characterization of corn-lentil

extruded snacks. Journal of Food Engineering, 100: 392–408.

Lee, C. and Han, O. (1997) Optimization of extrusion process of rice-ISP-file fish mixture by

response surface technology. Food and Biotechnology, 6(2): 97-103.

Liang, Y., Hosahalli, S.R.and Joyce, B. (2013) Protein rich extruded products prepared from

soy protein isolate-corn flour blends. LWT - Food Science and Technology, (50): 279–

289.

Lobato, L., Anibal, D., Lazaretti, M.M. and Grossmann, M.V.E. (2011) Extruded puffed

functional ingredient with oat bran and soy flour. LWT - Food Science and

Technology, 44: 933-939.

Lopez, R.A., Morell, M.K. and Topping, D.L. (2007) Processing of novel elevated amylose

wheats: Functional properties and starch digestibility of extruded products. Journal of

Agricultural and Food Chemistry, 55(25): 10248-10257.

Luyten, H., Plijter, J.J. and Van-Vliet, T. (2004) Crispy/crunchy crusts of cellular solid foods.

Journal of Texture Studies, 35: 445-492.

Maga, J.A. and Kim, C.H. (1989) Co-extrusion of rice flour with dried fruits and fruit juice

concentrates. LWT- Food Science and Technology, 22(4): 182-187.

Manjunatha, S.S., Kumar, M. and Gupta, D.K. (2003) Development and evaluation of carrot

kheer mix. Journal Food Science& Technology, (40): 310-312.

Manuel, M.S. and Sereno, A.M. (1999) The kinetics of browning measured during the

storage of onion and strawberry. International Journal of Food Science and

Technology, 34: 343–349.

124

Mariscal, M. and Bouchon, P. (2008) Comparison between atmospheric and vacuum frying

of apple slices. Food Chemistry, 107(4): 1561–1569.

Martina C., van Dalen, G., Meinders, M., Don, A., Hamer, R. and Vliet, T. (2010) Bread

crispness and morphology can be controlled by proving conditions. Food Research

International,43: 207-217.

Martína, C. and Vandeventer, H. (2011) Deep-fat fried battered snacks prepared using super-

heated steam (SHS): Crispness and low oil content. Food Research International 44:

442–448.

Mckee, L.H. and Latner, T.A. (2000) Underutilized sources of dietary fiber. Foods for

Human Nutrition, 55: 285-304.

Medina, W. T., Llera, A. A., Condori, J. L. and Aguilera, J. M. (2011) Physical properties

and microstructural changes during soaking of individual corn and quinoa breakfast

flakes. Journal of Food Science, 76(3): 254-265.

Mendonca, S., Grossmann, M.V.E. and Verhe, R. (2000) Corn bran as a fiber source in

expanded snacks. LWT-Food Science and Technology, 33(1): 2–8.

Meng, X., Threinen, D., Hansen, M. and Driedger, D. (2010) Effects of extrusion conditions

on system parameters and physical properties of a chickpea flour based snack. Food

Research International, 43(2): 650-658.

Mesa, N.J.E., Alsvi, S., Singh, N., Shi, Y.C., Dogan, H. and Sang, Y. (2009) Soy protein

fortified expanded extrudates using normal corn starch. Journal of Food Engineering,

90: 262-270.

125

Meyers, M. A. and Conklin, J. R. (1990) Method of inhibiting oil adsorption in coated fried

foods using hydroxypropyl methyl cellulose. US patent 4,900,573.

Ming, C.L., Shieh, T.C. and Chiang, W. (1993) Factors affecting starch degradation of rice

extruded by a twin-screw extruder. Journal of the Chinese Agricultural Chemical

Society, 31(4): 497-505.

Moraru, C.I. and Kokini, J.L. (2003) Nucleation and expansion during extrusion and

microwave heating of cereal foods. Comprehensive Reviews in Food Science and

Food Safety, 2: 120-138.

Moreira, R.G., Castell, M.E. and Barrufet, M.A. (1999) Deep-fat frying: fundamentals and

applications. Aspen Publishers, Gaithensburg, MA, 6(98): 179-202.

Moreira, R.G., Sun, X. and Chen, Y. (1997) Factors affecting oil uptake in tortilla chips in

deep-fat frying. Journal of Food Engineering, 31: 485–498.

Moreno, M.C., Brown, C.A. and Bouchon, P. (2010) Effect of food surface roughness on oil

uptake of deep-fat fried food. Journal of Food Engineering, 101: 179-186.

Mouquet, C., Salvignol, B., Van-Hoan, N., Monvois, J. and Treche. S. (2003) Ability of a

'very low-cost extruder' to produce instant infant flours at a small scale in Vietnam.

Food Chemistry, 82(2): 249-255.

Moyano, P. and Pedreschi, F. (2006) Kinetics of oil uptake during frying of potato slices:

effect of pre-treatments. LWT-Food Science and Technology, 39: 285–291.

Mueses, C., Deleon, L., Matute, J. and Bressani, R. (1993) Production of flours processed

with pigeon pea grains. Archives Latinoamericanos De Nutrition, 43(1): 33–40.

126

Mujumdar, A. S. and Devahastin, S. (2000) Fundamental principles of drying. In:

Devahastin, S (eds) Mujumdar’s practical guide to industrial drying. Exergex Vorp,

Montreal, pp 1–22.

Nath, A., Chattopadhyay, P. K. and Majumdar, G.C. (2007) High temperature short time air

puffed ready-to-eat potato snacks process parameter optimization. Journal of Food

Engineering, 80(3): 770-780.

Nath, A. and Chattopadhyay, P.K. (2008) Effect of process parameters and soy flour

concentration on quality attributes and microstructural changes in ready-to-eat potato–

soy snack using high-temperature short time air puffing. LWT - Food Science and

Technology 41(4): 707–715.

Nawirska, A. and Kwaśniewska, M. (2005) Dietary fibre fractions from fruit and vegetable

processing waste. Food Chemistry, 91: 221-225.

Nayak, B., Berrios, J. and Powers, J. (2011) Effect of extrusion on the antioxidant capacity

and color attributes of expanded extrudates prepared from purple potato and yellow

pea flour mixes. Journal of Food Science, 76(6): 74-83.

Negi, P.S. and Roy,S.K. (2001) Effect of drying under different processing and preservation

conditions on quality of green leaves during long methods, World. Journal of

Agricultural Sciences, 6(6): 639-643.

Negi,P.S. and Roy, S.K. (2001a) The effect of blanching on quality attributes of dehydrated

carrots during long term storage. European Food Research Technology, 212: 445–

448.

127

Ng, A., Lecain, S., Parker, M. L., Smith, A. C. and Waldron, K.W. (1999) Modification of

cell wall polymers of onion waste and effect of extrusion-cooking on cell wall

material of outer fleshy tissue. Carbohydrate Polymers, 39: 341–349.

Ng, S.C., Anderson, A., Coker, J. and Ondrus, M. (2007) Characterization of lipid oxidation

products in quinoa (Chenopodium quinoa). Food Chemistry, 101: 185–192.

Norajit, K.and Ryu,G.H.( 2011) Effects of the addition of hemp powder on the

physicochemical properties and energy bar qualities of extruded rice. Food Chemistry,

123(9): 1919–1925.

Nuria, G.M., Albert I.R. and Olga, M.B. (1999) Low properties of orange dietary fiber

suspensions. Journal of Texture Studies, 30(3): 245–257.

Oliveira, J.C., Pereira. P.M. and Oliveira, F.A. (1994) The role of transport phenomena. In

R.P. Singh, and F.A. Oliveira (Eds.), Minimal processing of foods and process

optimization. CRC Press (21): 257–266, Boca Raton, USA.

Oroszvari, B.K., Bayod, E., Sjoholm, I. and Tornberg, E. (2005) The mechanisms controlling

heat and mass transfer on frying of beef burgers. Part 2: The influence of the pan

temperature and patty diameter. Journal of Food Engineering, 71: 18-27.

Orr, D. (1984) The role of twin extrusion cooking in the production of breakfast cereals.

Institution of Chemical Engineers Symposium Series, 84: 61-66.

128

Orset, S., Leach, G.C., Morais, R. and Young, A.J. (1999) Spray-drying of the microalga

Dunaliella salination effects on β-carotene content and isomer composition.Journal

of Agricultural Food Chemistry, 47(11): 4782-90.

Oshawa,K., Chinen, C, Takanami, S. and Kuribayashi, K. (1995) Studies on effective

utilization of carrot pomace. II. Effective utilization to cake, dressings and

pickles. International Journal of Food Science Technology, 23: 15–18.

Ozkoc, O.S., Summu,G. and Sahin, S. (2009) The effect of gums on macro and

microstructure of breads baked in different ovens. Food Hydrocolloids, 23(8): 2182–

2189.

Pansawat, N., Jangchud, K., Jangchud, A., Wuttijumnong, P., Saalia, F.K., Eitenmiller, R.R.

and Phillips, R.D. (2008) Effects of extrusion conditions on secondary extrusion

variables and physical properties of fish, rice-based snacks. LWT-Food Science and

Technology, 41: 632-641.

Parada, J., Aguilera, J.M. and Brennan, C. (2011) Effect of guar gum content on some

physical and nutritional properties of extruded products. Journal of Food

Engineering, (103): 324-332.

Parimala, K.R. and Sudha, M.L. (2012) Effect of hydrocolloids on the rheological,

microscopic, mass transfer characteristics during frying and quality characteristics of

puri. Food Hydrocolloids, 27: 191-200.

Pedreschi, F., Aguilera, J.M. and Arbildua, J.J. (1999) CLSM study of oil location in fried

potato slices. Microscopy and Analysis, 37: 21–22.

Pedreschi, F. and Moyano, P.C. (2005b) Effect of pre-drying on texture and oil uptake of

potato chips. LWT - Food Science and Technology, 38: 599–604.

129

Peleg, M, (1983) Physical characteristics of Food powders In: Peleg,M and Bagley

(Eds).Physical properties of foods AVI publishing Co., Westport CT, pp. 293-324.

Plahar, W.A., Onuma, O.B. and Annan,N.T. (2003) Nutritional quality and storage stability

of extruded weaning food based on peanut, maize and soybean. Plant Foods for

Human Nutrition, 58(3): 1-16.

Potter, R., Stojceska, V. and Plunket, A. (2013) The use of fruit powders in extruded snacks

suitable for children’s diets, LWT-Food Science Technology, 51: 537-544.

Prakash, S., Jha, S.K. and Datta, N. (2004)Modelling of the rehydration process of

evaluation of blanched carrots dried by three different driers. Journal of Food

Engineering, 212: 449-453.

Primo-Martín, C. (2012) Cross-linking of wheat starch improves the crispness of deep-fried

battered food. Food Hydrocolloids, 28: 53-58.

Priya, R., Singhal, R.S. and Kulkarni, P.R. (1996) Carboxymethylcellulose and hydroxyl

propylmethylcellulose as additive in reduction of oil content in batter based deep fat

fried boondies.Carbohydrate Polymers, 29: 333–336.

Pua, C.K., Hamid, S.A.H., Tan, C.P., Hossein, M., Rahman, R.A. and Rusul, G.( 2008)

Storage stability of jackfruit (Artocarpus heterophyllus) powder packaged in

aluminium laminated polyethylene and metalized co-extruded biaxially oriented

polypropylene during storage. Journal of Food Engineering, 89: 419–428.

Ralet, M.T. (1991) Solubilisation of sugar-beet pulp cell wall polysaccharides by extrusion-

cooking. LWT – Food Science and Technology, 24:107–112.

130

Ramírez, C., Troncoso, E., Muñoz, J. and Aguilera, J.M. (2011) Microstructure analysis on

pre-treated apple slices and its effect on water release during air drying. Journal of

Food Engineering, 106: 253-261.

Rampersad, R., Badrie, N. and Comissiong, E. (2006) Physico-chemical and sensory

characteristics of flavoured snacks from extruded cassava/pigeon pea flour, Journal of

Food Science, 68(1): 363-367.

Ranganna, S. (2003)Handbook of analysis and quality control for fruits and vegetable

products - 2nd Edition,Tata McGraw-Hill Publishing Company Limited, New Delhi.

Riaz, M,N., Ali, M. and Rashida. (2009) Stability of Vitamins during Extrusion. Critical

Reviews in Food Science and Nutrition 49(4): 361-368.

Robin, F., Engmann, J., Pineau, N., Chanvrier, H., Bovet, N. and Della Valle, G. (2010)

Extrusion, structure and mechanical properties of complex starchy foams. Journal of

Food Engineering, 98(1): 19-27.

Ruales, J., Polit, P. and Nair, B. (1988) Nutritional quality of blended foods of rice, soy and

lupins, processed by extrusion. Food Chemistry, 29(4): 309-321.

Ryu, G.H. and Lee, C.H. (1988) Effects of moisture content and particle size of rice flour on

physical properties of the extrudate. Korean Journal of Food Science and Technology,

20(4): 463-469.

Ryu, G.H., Neumann, P. E., and Walker, C. E. (1993) Effect of some baking ingredients on

physical and structural properties of wheat flour extrudates. Cereal Chemistry, 70:

291–297.

131

Rzedzicki1, Z. and Baszczak, W. (2005) Impact of microstructure in modelling physical

properties of cereal extrudates. International Agro Physics, 19: 175-186.

Sacchetti, G., Pinnavaia, G.G., Guidoliu, E. and Rosa, D.M. (2004) Effect of extrusion

temperature and feed composition on functional, physical and sensory properties of

chestnut and rice flour based snack like products. Food Research International, 73:

527-534.

Saeleaw, M. and Schleining, G. (2011) Effect of frying parameters on crispiness and sound

emission of cassava crackers. Journal of Food Engineering, 103(3): 229-236

Saeleaw, M., Dürrschmid, K. and Schleining, G. (2012) The effect of extrusion conditions

on mechanical-sound and sensory evaluation of rye expanded snack. Journal of Food

Engineering, 110: 532–540.

Saguy, I.S. and Dana, D. (2003) Integrated approach to deep fat frying: engineering,

nutrition, health and consumer aspects. Journal of Food Engineering, 56: 143-152.

Sanz, T., Salvador, A. and Fiszman, S. M. (2004) Effect of concentration and temperature on

properties of methylcellulose-added batters application to battered fried seafood. Food

Hydrocolloid, 18(1): 127–131.

Schieber, A., Stintzing, F.C. and Carle, R. (2001)By-products of plant food processing as a

source of functional compounds recent developments. Trends in Food Science and

Technology 12: 401-413.

Schweiggert, U. (2004). Carrot pomace as a source of functional ingredients. Fluss Obst.

71:136–140.

132

Semin O.O., Gulum, S., Serpil, S. and Elif, T. (2009) Investigation of physicochemical

properties of breads baked in microwave and infrared-microwave combination ovens

during storage. European Food Research and Technology, 228(6): 883-893.

Serena,A. and Kundsen, B. (2007) Chemical and physicochemical characterisation of co-

products from vegetable food and agro industries. Animal Feed Science and

Technology, 139: 109–124.

Shannon, D., Hood, N. and Robert, T.T. (2010) Effect of protein, moisture content and barrel

temperature on the physicochemical characteristics of pea flour extrudates. Food

Research International, 43: 659–663.

Sharma, H.K., Kaur, J., Sarkar, B.C., Singh, C. and Singh, B. (2009) Effect of pretreatment

conditions on physiochemical parameters of carrot juice. International Journal of

Food Science and Technology, 44: 1-9.

Sharma, H.K., Kaur,B., Sarkar,B.C. and Singh, C. (2006) Thermal behavior of pure rice bran

oil, sunflower oil and their model blends during deep fat frying. Grasas Y Aceites, 57

4: 376-381.

Shoar, Z.D., Allan, K.H., Charles, S. and Brennan (2010) The physico-chemical

characteristics of extruded snacks enriched with tomato lycopene. Food Chemistry

123(4): 1117–1122.

Shyu, S.L., Hau, L.B. and Hwang, L.S. (2005) Effects of processing conditions on the quality

of vacuum-fried carrot chips. Journal of the Science of Food and Agriculture, 85:

1903–1908.

Siegel, A. and Fawcit, B. (1976) Food legume processing and utilization, IDRC-TS1.

International development centre Otttawa,Canada.

133

Singh, R.P. (1995) Heat and mass transfer in foods during deep-fat frying. Food Technology

49(4):134-137.

Singh, J., Dartois, A. and Kaur, L. (2010) Starch digestibility in food matrix: A review.

Trends in Food Science and Technology, 21: 168-180.

Singh, N. and Smith, A.C. (1997) A comparison of wheat starch, whole wheat meal and oat

flour in the extrusion cooking process. Journal of Food Engineering, 34: 15-32.

Singh, R.P. (2000) Scientific principles of shelf-life evaluation. In: Man, C.M.D., Jones, A.A.

(Eds.), Shelf life of foods, Second ed., Aspen Publishers Inc., Maryland, USA, 3-22.

Singh, U. (1988) Anti-nutritional factors of chickpea and pigeon pea and their removal by

processing. Plant Food Human Nutrition, 38: 251-261.

Singh, U., Santosa, B.A.S. and Rao, P.V. (1992) Effect of dehulling methods and physical

characteristics of grains on dhal yield of pigeon pea (Cajanus cajan L.) genotypes.

Journal of Food Science and Technology, 29(6): 350 – 353.

Smithy, S.L., Huff, H. E. and Hsieh, F. (1995) Processing parameters and product properties

of extruded beef and nonmeat cereal binders. LWT-Food Science and Technology, 28:

386–394.

Sothornvit, R. (2011) Edible coating and post-frying centrifuge step effect on quality of

vacuum-fried banana chips. Journal of Food Engineering, 107: 319–325.

Srivastava, R.P. and Kumar, S. (2003) Fruits and vegetable preservation – principles and

practices, International Book Distributing Co., India, pp. 360.

134

Stefanovich, A.F. and Karel, M. (1982) Kinetic of beta carotene degradation at temperature

typical of air drying of foods. Journal of Food Processing and Preservation, 6: 227–

242.

Stephens, S.T., Saldana, G. and Lime, B.J. (1976) Neutralized juice of acid treated

carrots. Journal of Food Science, 41: 1245–1246.

Stephens, T.H. and McLemore, T.A. (1969) Preparation and storage of dehydrated carrot

flakes. Food Technology, 23(12): 1600–1602.

Stojceska, V., Ainsworth, P., Plunkett, A., Ibanoglu, E. and Ibanoglu, S. (2008) Cauliflower

by-products as a new source of dietary fibre, antioxidants and proteins in cereal based

ready-to-eat expanded snacks. Journal of Food Engineering, 87: 554–563.

Stojceskaa, V., Ainsworth, A., Plunkett, A. and SenolIbanoglu, A. (2010) The advantage of

using extrusion processing for increasing dietary fibre level in gluten-free products.

Food Chemistry, 12(1): 156–164.

Stoll, A., Schieber, A., Carle, R., Pfannhauser, W., Fenwick, G. R. and Khokhar, S. (2001)

Carrot pomace an under estimated by-product in foods. Cambridge: The Royal Society

of Chemistry, 525–527.

Stoll, T., Schweiggert, U., Schieber, A. and Carle, R. (2003) Application of hydrolyzed carrot

pomace as a functional food ingredient to beverages. Journal of Food Agriculture and

Environment, 1(2): 88-92.

Sulaeman, A., Keeler, L., Giraud, D. W., Taylor, S. L. and Driskell, J. A. (2003) Changes in

carotenoid, physicochemical and sensory values of deep-fried carrot chips during

storage. International Journal of Food Science and Technology, 38: 603–613.

135

Sung, W.C and Stone, M. (2005) Microstructural studies of pasta and starch pasta. Journal of

Marine Science and Technology, 13: 83-88.

Tan, J., Zhang, H. and Gao, X. (1997) SEM image processing for food structure analysis.

Journal of Texture Studies, 28: 657–672.

Tangirala, S., Sarkar, B.C., Sharma, H.K. and Kumar, N. (2012) Modelling and

characterization of blended guava pomace and pulse powder based rice extrudates.

International Journal of Food Engineering, 8(1): 1–24.

Torres, A., Frias, J., Grantio, M. and Vidalvelrede, C. (2006) Fermented pigeon pea (Cajanus

cajan) ingredients in pasta products. Journal of Agricultural Food Chemistry, 54 (18):

6685-6691.

Trater, A.M., Alavi, S. and Rizvi, S.S.H. (2005) Use of non-invasive X-ray microtomography

for characterizing microstructure of extruded biopolymer foams. Food Research

International, 38(6): 709-719.

Troncosoa, E., Pedreschi, F and Zunigac, R.N. (2009) Comparative study of physical and

sensory properties of pre-treated potato slices during vacuum and atmospheric frying

LWT - Food Science and Technology, 42: 187–195.

Ufheil, G. and Escher, F. (1996) Dynamics of oil uptake during deep-fat frying of potato

slices. LWT-Food Science and Technology, (29): 640-643.

Upadhyay, A., Sharma, H.K. and Sarkar, B.C. (2008) Characterization and Dehydration

Kinetics of Carrot Pomace. Agricultural Engineering International: The CIGR

Ejournal. Manuscript FP07 35. Vol. X.

136

Upadhyay, A., Sharma, H.K. and Sarkar, B.C. (2010) Optimization of carrot pomace powder

incorporation on extruded product quality by response surface methodology. Journal

of Food Quality, 33: 350-369.

Varnalis, A.I., Brennan, J.G. and MacDougall, D.B. (2001) A proposed mechanism of high-

temperature puffing of potato part I The influence of blanching and drying conditions

on the volume of puffed cubes. Journal of Food Engineering, 48: 361-367.

Vickers, Z., and Bourne, M.C. (1976) A psychoacoustic theory of crispness. Journal of Food

Science, 41: 1158–1164.

Visessurakarn, S., Duangmal, K. and Itthiwachana, S. (1991) Use of broken rice for breakfast

cereals. Food, 21(1): 24-36.

Wagner, L.A. and Warthesen, J.J. (1995) Stability of spray dried encapsulated carrot

carotenes. Journal of Food Science, 60: 1048-1053.

Walde, S.G., Math, R.G., Chakkarvarthi, A. and Rao, D.G. (1992) Preservation of carrots by

dehydration techniques. Indian Food Packer, 46: 37-42.

Wang, N., Bhirud, P., Sosulski, F. and Tyler, R. (1999) Pasta-like product from pea flour by

twin-screw extrusion. Journal of Food Science, 64: 671–678.

Wang, Y.Y. and Ryu, G.H. (2013) Physical properties of properties extruded corn grits with

corn fibre by CO2 injection extrusion. Journal of Food Engineering, 116(1): 14-20.

Wang, R., Zhanga, M.and Arun ,M.(2010) Effects of vacuum and microwave freeze drying

on microstructure and quality of potato slices. Journal of Food Engineering, 101:

131–139.

137

Warburton, S.C., Donald, A.M. and Smith, A.C. (1992) Structure and mechanical properties

of brittle starch foams. Journal of Material Science, 27: 1469–1474.

Wójtowicz, A. (2005) Influence of some functional components addition on the

microstructure of precooked pasta. Polish Journal of Food and Nutrition Sciences, 14

(4): 417-422.

Wójtowicz,A. and Leszek, M. (2011)Effect of wheat bran addition and screw speed on

microstructure and textural characteristics of common wheat precooked pasta-like

products.Polish Journal of Food and Nutrition,61 (2): 101-107.

Yagci, S. and Goguş, F. (2008) Response surface methodology for evaluation of physical and

functional properties of extruded snack foods developed from food-by-products.

Journal of Food Engineering, 86: 122–132.

Yagci, S. and Gogus, F. (2009) Effect of incorporation of various food by-products on some

nutritional properties of rice-based extruded foods. Food Science and Technology.

International, 15: 571-581.

Yeh, A. and Jaw, Y.M. (1999) Effects of feed rate and screw speed on operating

characteristics and extrudate properties during single-screw extrusion cooking of rice

flour. Cereal Chemistry, 76(2): 236-242.

Yogua,V. and Rosana, G. (2011) Physical and thermal properties of potato chips during

vacuum frying, Journal of Food Engineering, 104 (2): 272-283.

Yoon, K.Y., Cha, M.H., Shin, S.R.and Kim, K. S. (2005) enzymatic production of a soluble-

fibre hydrolyzate from carrot pomace and its sugar composition. Food Chemistry,

92(1): 151-157.

138

Yoshitomi, B. (2004) Effect of extrusion cooking temperature on the microstructure of

extruded fish pellets. Fish Science, 70: 1157–1163.

Young, T.L. and Schwarz, P.B. (2004) Physical and cooking properties of restructured grain

extruded from selected cereal and legume flours. Food Science and Biotechnology,

13(4): 438-442.

Zarzycki, P., Rzedzicki, Z. and Baszczak, W. (2010) Application of oat whole-meal and

protein components as modifiers of extrudates microstructure. International

Agrophysics, 24: 397-406.

Zhang, D. and Hamauzu, Y. (2004) Phenolics, ascorbic acid, carotenoids and antioxidant

activity of broccoli and their changes during conventional and microwave cooking.

Food Chemistry, 88: 503-509.

Zhen-Ma, A.B., Joyce, I., Boyeb, Benjamin, K., Simpsonc, Shiv, O., Prasher, A. D. and

Monpetit, B.L.M. (2011) Thermal processing effects on the functional properties and

microstructure of lentil, chickpea, and pea flours. Food Research International, 44:

2534–2544.

Zhu, L.J., Shukri. R., Normell. J.,Street. S., Alavi. S., Dogan, H. and Cheng-Shi,Y.(2010)

Mechanical and microstructural properties of soy protein high amylose corn starch

extrudates in relation to physiochemical changes of starch during extrusion. Journal

of Food Engineering, 100 (2): 232–238.