Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Reference
Reference
192
55.. RREEFFEERREENNCCEE
Abd El Rehim, S. S., Ibrahim, M. A., & Khalid, K. F. (2001). The inhibition of 4-(2′-amino-5′-
methylphenylazo) antipyrine on corrosion of mild steel in HCl solution. Materials Chemistry & Physics,
70(3), 268-273.
Abd El Rehim, S. S., Sayyah, S. M., El-Deeb, M. M., Kamal, S. M., & Azooz, R. E. (2010). Poly (o-
phenylenediamine) as an inhibitor of mild steel corrosion in HCl solution. Materials Chemistry &
Physics, 123(1), 20-27.
Abdallah, M. (2004). Guar gum as corrosion inhibitor for carbon steel in sulfuric acid solutions.
Portugaliae Electrochimica Acta, 22(2), 161-175.
Abdallah, M., Megahed, H. E., El-Etre, A. Y., Obied, M. A., & Mabrouk, E. M. (2004). Polyamide
compounds as inhibitors for corrosion of aluminum in oxalic acid solutions. Bulletin of Electrochemistry,
20(6), 277-281.
Abed, Y., Arrar, Z., Hammouti, B., Taleb, M., Kertit, S. & Mansri, A. (2001b). Poly(4-vinylpyridine) and
poly(4-vinylpyridine polyethylene glycol) as corrosion inhibitors for Cu60-Zn40 in 0.5M HNO3. Anti-
Corrosion Methods & Materials, 48(5), 304-308.
Abed, Y., Hammouti, B., Touhami, F., Aouniti, A., Kertit, S., Mansri, A. & Elkacemi, K. (2001a). Poly(4-
vinylpyridine) (P4VP) as corrosion inhibitors of armco iron in molar sulfuric acid solution. Bulletin of
Electrochemistry, 17(3), 105-110.
Achary, G., Naik, Y. A., Kumar, S. V., Venkatesha, T. V., & Sherigara, B. S. (2008). An electroactive co-
polymer as corrosion inhibitor for steel in sulphuric acid medium. Applied Surface Science, 254(17),
5569-5573.
Agrawal, S. L., & Awadhia, A. (2004). DSC and conductivity studies on PVA based proton conducting
gel electrolytes. Bulletin of Materials Science, 27(6), 523-527.
Akbarzadeh, E., Ibrahim, M. M., & Rahim, A. A. (2011). Corrosion inhibition of mild steel in near neutral
solution by kraft and soda lignins extracted from oil palm empty fruit bunch. International Journal of
Electrochemical Science, 6(11), 5396-5416.
Al Juhaiman, L. A., Mustafa, A. A., & Mekhamer, W. K. (2012). Polyvinyl Pyrrolidone as a Green
Corrosion Inhibitor of Carbon Steel in Neutral Solutions Containing NaCl: Electrochemical and
Thermodynamic Study. International Journal Electrochemical Science, 7(9), 8578-8596.
Ali Fathima Sabirneeza, A., & Subhashini, S. (2013). A novel water‐soluble, conducting polymer
composite for mild steel acid corrosion inhibition. Journal of Applied Polymer Science, 127(4), 3084-
3092.
Ali Fathima Sabirneeza, A., Subhashini, S., & Rajalakshmi, R. (2013). Water soluble conducting
polymer composite of polyvinyl alcohol and leucine: An effective acid corrosion inhibitor for mild steel.
Materials & Corrosion, 64(1), 74-82.
Ali, S. A., & Saeed, M. T. (2001). Synthesis and corrosion inhibition study of some 1,6-hexanediamine-
based N,N-diallyl quaternary ammonium salts and their polymers. Polymer, 42(7), 2785-2794.
Ali, S. A., Saeed, M. T., & El‐Sharif, A. M. (2012). Diallyl‐1, 12‐diamino dodecane‐based cyclopolymers
and their use as inhibitors for mild steel corrosion. Polymer Engineering & Science, 52(12), 2588-2596.
Reference
193
Al-Sabagh, A. M., Elsabee, M., Elazabawy, O. E., & Amira, E. E. (2010). Corrosion inhibition efficiency
of polytriethanolamine surfactants for pipe-lines carbon steel in 1M HCl, Journal of Dispersion Science
& Technology, 31(10), 1288–1297.
Aly, K. I., & Hussein, M. A. (2010). New polymer syntheses, part 45: Corrosion inhibition behavior of
novel polyurea derivatives based on diarylidenecycloalkanone moieties in the polymers backbone.
Journal of Polymer Research, 17(5), 607-620.
Aly, K. I., Abbady, M. A., Mahgoub, S. A., & Hussein, M. A. (2009a). New polymer syntheses, Part 44:
Synthesis, characterization, and corrosion inhibition behavior of new polyurea derivatives based on
diaryl ether in the polymers backbone. Journal of Applied Polymer Science, 112(2), 620-628.
Aly, K. I., Wahdan, M. H., & Hussein, M. A. (2009b). New polymer syntheses, Part 43: Novel
polyamides‐based diarylidenecyclopentanone: Synthesis, characterization, and corrosion inhibition
behavior. Journal of Applied Polymer Science, 112(1), 513-523.
Amin, M. A., Abd EI-Rehim, S.S., El-Sherbini, E. E. F., Hazzazi, O. A., & Abbas, M. N. (2009). Poly
acrylic acid as a corrosion inhibitor for aluminium in weakly alkaline solutions. Part I: Weight loss,
polarization, impedance EFM and EDX studies. Corrosion Science, 51(3), 658–667.
Amin, M. A., Abd El-Rehim, S. S., El-Sherbini, E. E. F., & Bayoumi, R. S. (2008). Chemical and
electrochemical (AC and DC) studies on the corrosion inhibition of low carbon steel in 1.0 M HCl
solution by succinic acid-temperature effect, activation energies and thermodynamics of adsorption.
International Journal of Electrochemical Sciences, 3(2), 199-215.
Amira, W. E., Rahim, A. A., Osman, H., Awang, K., & Raja, P. B. (2011). Corrosion inhibition of mild
steel in 1 M HCl solution by Xylopia ferruginea leaves from different extract and partitions. International
Journal of Electrochemical Science, 6(7), 2998-3016.
Aramaki, K., Hagiwara, M., & Nishihara, H. (1987). Adsorption and corrosion inhibition effect of anions
plus an organic cation on iron in 1M HClO4 and the HSAB principle. Journal of the Electrochemical
Society, 134(8), 1896-1901.
Arthur, D. E., Jonathan, A., Ameh, P. O., & Anya, C. (2013). A review on the assessment of polymeric
materials used as corrosion inhibitor of metals and alloys. International Journal of Industrial Chemistry,
4(1), 1-9.
Ashassi-Sorkhabi, H., Ghalebsaz-Jeddi, N., Hashemzadeh, F., & Jahani, H. (2006). Corrosion inhibition
of carbon steel in hydrochloric acid by some polyethylene glycols. Electrochimica Acta, 51(18), 3848–
3854.
Ashassi-Sorkhabi, H., Ghasemi, Z., & Seifzadeh, D. (2005a). The inhibition effect of some amino acids
towards the corrosion of aluminum in 1M HCl+ 1M H2SO4 solution. Applied Surface Science, 249(1),
408-418.
Ashassi-Sorkhabi, H., Majidi, M. R., & Seyyedi, K. (2004). Investigation of inhibition effect of some
amino acids against steel corrosion in HCl solution. Applied Surface Science, 225(1), 176-185.
Ashassi-Sorkhabi, H., Shaabani, B., & Seifzadeh, D. (2005b). Corrosion inhibition of mild steel by some
Schiff base compounds in hydrochloric acid. Applied Surface Science, 239(2), 154-164.
Aslan, E., Camuşcu, N., & Birgören, B. (2007). Design optimization of cutting parameters when turning
hardened AISI 4140 steel (63 HRC) with Al2O3 + TiCN mixed ceramic tool. Materials & design, 28(5),
1618-1622.
Reference
194
Assender, H. E., & Windle, A. H. (1998). Crystallinity in poly (vinyl alcohol). 1. An X-ray diffraction study
of atactic PVOH. Polymer, 39(18), 4295-4302.
Ateya, B. G., El-Anadouli, B. E., & El-Nizamy, F. M. (1984). The adsorption of thiourea on mild steel.
Corrosion Science, 24(6), 509-515.
Atta, A. M., El-Azabawy, O. E., Ismail, H. S., & Hegazy, M. A. (2011). Novel dispersed magnetite core-
shell nanogel polymers as corrosion inhibitors for carbon steel in acidic medium. Corrosion Science,
53(5), 1680-1689.
Babic-Samardzija, K., Lupu, C., Hackerman, N., Barron, A. R., & Luttge, A. (2005). Inhibitive properties
and surface morphology of a group of heterocyclic diazoles as inhibitors for acidic iron corrosion.
Langmuir, 21(26), 12187-12196.
Badawy, W. A., Ismail, K. M., & Fathi, A. M. (2006). Corrosion control of Cu–Ni alloys in neutral chloride
solutions by amino acids. Electrochimica Acta, 51(20), 4182-4189.
Bama, G. K., Devi, P. I., & Ramachandran, K. (2009). Structural and thermal properties of PVDF/PVA
blends. Journal of materials science, 44(5), 1302-1307.
Banumathi, N., Subhashini, S., & Rajalakshmi, R. (2010a). Polyethylene glycol aniline composite as
corrosion inhibitor for mild steel in acid medium. Journal of Ultra Chemistry, 6(2), 129-136.
Banumathi, N., Subhashini, S., & Rajalakshmi, R. (2010b). Polyethylene glycol-anthranilic acid
composite as corrosion inhibitor for mild steel in acid medium. Journal of Chemistry, 7(S1), S67-S74.
Barouni, K., Bazzi, L., Salghi, R., Mihit, M., Hammouti, B., Albourine, A., & El Issami, S. (2008). Some
amino acids as corrosion inhibitors for copper in nitric acid solution. Materials Letters, 62(19), 3325-
3327.
Belkaid, S., Tebbji, K., Mansri, A., Chetouani, A., & Hammouti, B. (2012). Poly (4-vinylpyridine-
hexadecyl bromide) as corrosion inhibitor for mild steel in acid chloride solution. Research on Chemical
Intermediates, 38(9), 2309-2325.
Benabdellah, M., Ousslim, A., Hammouti, B., Elidrissi, A., Aouniti, A., Dafali, A., Bekkouch, K. &
Benkaddour, M. (2007a). The effect of poly(vinyl caprolactone-co-vinyl pyridine) and poly(vinyl imidazol-
co-vinyl pyridine) on the corrosion of steel in H3PO4 media. Journal of Applied Electrochemistry, 37(7),
819-826.
Benabdellah, M., Touzani, R., Dafali, A., Hammouti, B., & El Kadiri, S. (2007b). Ruthenium–ligand
complex, an efficient inhibitor of steel corrosion in H2SO4 media. Materials Letters, 61(4), 1197-1204.
Benchikh, A., Aitout, R., Makhloufi, L., Benhaddad, L., & Saidani, B. (2009). Soluble conducting
poly(aniline-co-orthotoluidine) copolymer as corrosion inhibitor for carbon steel in 3% NaCl solution.
Desalination, 249(2), 466–474.
Bentiss, F., Lagrenee, M., Traisnel, M., & Hornez, J. C. (1999). Corrosion inhibition of mild steel in 1 M
hydrochloric acid by 2, 5-bis (2-aminophenyl)-1, 3, 4-oxadiazole. Corrosion, 55(10), 968-976.
Bentiss, F., Lebrini, M., & Lagrenée, M. (2005). Thermodynamic characterization of metal dissolution
and inhibitor adsorption processes in mild steel/2, 5-bis (n-thienyl)-1, 3, 4-thiadiazoles/hydrochloric acid
system. Corrosion Science, 47(12), 2915-2931.
Bentiss, F., Traisnel, M., Chaibi, N., Mernari, B., Vezin, H., & Lagrenée, M. (2002). 2, 5-Bis (n-
methoxyphenyl)-1, 3, 4-oxadiazoles used as corrosion inhibitors in acidic media: correlation between
inhibition efficiency and chemical structure. Corrosion science, 44(10), 2271-2289.
Reference
195
Bereket, G., Yurt, A. & Tuerk, H. (2003). Inhibition of the corrosion of low carbon steel in acidic solution
by selected poly electrolytes and polymers. Anti-Corrosion Methods & Materials, 50(6), 422-435.
Bhandari, H., Choudhary, V., & Dhawan, S. K. (2009b). Synergistic effect of copolymers composition on
the electrochemical, thermal, and electrical behavior of 5‐lithiosulphoisophthalic acid doped poly
(aniline‐co‐2‐isopropylaniline): synthesis, characterization, and applications. Polymers for Advanced
Technologies, 20(12), 1024-1034.
Bhandari, H., Choudhary, V., & Dhawan, S. K. (2011). Influence of self-doped poly (aniline-co-4-amino-
3-hydroxy-naphthalene-1-sulfonic acid) on corrosion inhibition behaviour of iron in acidic medium.
Synthetic Metals, 161(9), 753-762.
Bhandari, H., Sathiyanaranayan, S., Choudhary, V., & Dhawan, S. K. (2009a). Synthesis and
characterization of proccessible polyaniline derivatives for corrosion inhibition. Journal of Applied
Polymer Science, 111(5), 2328-2339.
Cecchetto, L., Delabouglise, D., & Petit, J. P. (2007). On the mechanism of the anodic protection of
aluminium alloy AA5182 by emeraldine base coatings: Evidences of a galvanic coupling. Electrochimica
Acta, 52(11), 3485-3492.
Chamovska, D., Cvetkovska, M., & Grchev, T. (2007). Corrosion inhibition of iron in hydrochloric acid by
poly acrylamide. Journal of the Serbian Chemical Society, 72(7), 687-698.
Chetouani, A., Medjahed, K., Sid-Lakhdar, K. E., Hammouti, B., Benkaddour, M., & Mansri, A. (2004).
Poly(4-vinylpyridine-poly(3-oxide-ethylene) tosyle) as an inhibitor for iron in sulphuric acid at 80oC.
Corrosion Science, 46(10), 2421–2430.
Chin, R. J., & Nobe, K. (1972). Electrodissolution kinetics of iron in chloride solutions III. Acidic
solutions. Journal of the Electrochemical Society, 119(11), 1457-1461.
Choi, D. J., You, S. J., & Kim, J. G. (2002). Development of an environmentally safe corrosion, scale,
and microorganism inhibitor for open recirculating cooling systems. Materials Science & Engineering: A,
335(1-2), 228–235.
Chowdhury, P., Ali, M. A., & Roy, K. (2007). Free radical graft polymerization of methyl methacrylate
from polyvinyl alcohol using FeCl₃/K₂S₂O₅ redox pair. Indian journal of chemistry, 46, 1414-1418.
Coates, J. (2000). Interpretation of infrared spectra, a practical approach. Encyclopedia of analytical
chemistry.
Dahmani, M., Et-Touhami, A., Al-Deyab, S. S., Hammouti, B., & Bouyanzer, A. (2010). Corrosion
inhibition of C38 steel in 1 M HCl: a comparative study of black pepper extract and its isolated piperine.
International Journal of Electrochemical Science, 5(8), 1060-1069.
Daouadji, M. M., & Chelali, N. (2004). Influence of molecular weight of poly(ortho-ethoxyaniline) on the
corrosion inhibition efficiency of mild steel in acidic media. Journal of Applied Polymer Science, 91(2),
1275-1281.
Darwish, N. A., Hilbert, F., Lorenz, W. J., & Rosswag, H. (1973). The influence of chloride ions on the
kinetics of iron dissolution. Electrochimica Acta, 18(6), 421-425.
Do Duong, D. (1998). Absorption Analysis: Equilibria and Kinetics (Vol. 2). Imperial College Pr.
Ebenso, E. E., Ekpe, U. J., Ita, B. I., Offiong, O. E., & Ibok, U. J. (1999). Effect of molecular structure on
the efficiency of amides and thiosemicarbazones used for corrosion inhibition of mild steel in
hydrochloric acid. Materials Chemistry & Physics, 60(1), 79-90.
Reference
196
Ebenso, E. E., Ekpe, U. J., Umoren, S. A., Jackson, E., Abiola, O. K., & Oforka, N. C. (2006).
Synergistic effect of halide ions on the corrosion inhibition of aluminum in acidic medium by some
polymers. Journal of Applied Polymer Science, 100(4), 2889-2894.
Ebenso, E. E., Ekpe, U. J., Umoren, S., Jackson, E., Abiola, O. K., & Oforka, N. C. (2005). Synergistic
effect of halide ions on the corrosion inhibition of aluminum by some polymers. Bulletin of
Electrochemistry, 21(10), 437-444.
Eddy, N. O., Ameh, P., Gimba, C. E., & Ebenso, E. E. (2011). GCMS studies On Anogessus leocarpus
(Al) gum and their corrosion inhibition potential for mild steel in 0.1 M HCl. International Journal of
Electrochemical Science, 6(11), 5815-5829.
Ein-Eli, Y. & Auinat, M. (2003). The behavior of zinc metal in alkaline solution containing organic
inhibitors. Journal of the Electrochemical Society, 150(12), A1606-A1613.
Elango, A., Umadevi, Paramasivam, M., & Periasamy, V. M. (2009). Polyaniline as a corrosion inhibitor
for commercial aluminum in alkaline solutions. Journal of Metallurgy & Materials Science, 51(2), 97-104.
El‐Awady, A. A., Abd‐El‐Nabey, B. A., & Aziz, S. G. (1992). Kinetic‐ thermodynamic and adsorption
isotherms analyses for the inhibition of the acid corrosion of steel by cyclic and open‐chain amines.
Journal of the Electrochemical Society, 139(8), 2149-2154.
El-Deeb, M. M., & Mohamed, S. M. (2011). Corrosion inhibition of aluminum with a 3-(10-sodium
sulfonate decyloxy) aniline monomeric surfactant and its analog polymer in a 0.5M hydrochloric acid
solution. Journal of Applied Polymer Science, 122(5), 3030-3037.
Elkadi, L., Mernari, B., Traisnel, M., Bentiss, F., & Lagrenee, M. (2000). The inhibition action of 3, 6-bis
(2-methoxyphenyl)-1, 2-dihydro-1, 2, 4, 5-tetrazine on the corrosion of mild steel in acidic media.
Corrosion Science, 42(4), 703-719.
El-Sherbini, E. F., Moussa, S. O., El-Rehim, S. A., & Hamed, E. (2007). Effect of some polymeric
materials on the corrosion behaviour of tin in succinic acid solution. Journal of Applied Electrochemistry,
37(5), 533-541.
Epelboin, I., & Keddam, M. (1972). Kinetics of formation of primary and secondary passivity in sulphuric
aqueous media. Electrochimica Acta, 17(2), 177-186.
Fanta, G. F. (1973). Synthesis of graft and block copolymers of starch. Block and graft
copolymerization, 1, 11.
Fekry, A. M., & Mohamed, R. R. (2010). Acetyl thiourea chitosan as an eco-friendly inhibitor for mild
steel in sulphuric acid medium. Electrochimica Acta, 55(6), 1933-1939.
Ferreira, E. S., Giacomelli, C., Giacomelli, F. C., & Spinelli, A. (2004). Evaluation of the inhibitor effect of
L-ascorbic acid on the corrosion of mild steel. Materials Chemistry & Physics, 83(1), 129-134.
Ferry M., Mohd Noor C.W., Gaspersz, F., Manuputty, M., Corrosion Performance of Mild Steel in
Seawater Inhibited By Allium CEPA. (2013). Journal of Engineering, Computers & Applied Sciences,
2(3), 24-30.
Finšgar, M., Fassbender, S., Hirth, S., & Milošev, I. (2009a). Electrochemical and XPS study of
polyethyleneimines of different molecular sizes as corrosion inhibitors for AISI 430 stainless steel in
near-neutral chloride media. Materials Chemistry & Physics, 116(1), 198-206.
Finšgar, M., Fassbender, S., Nicolini, F., & Milošev, I. (2009b). Polyethyleneimine as a corrosion
inhibitor for ASTM 420 stainless steel in near-neutral saline media. Corrosion Science, 51(3), 525-533.
Foroulis, Z. A. (1973). U.S. Patent No. 3,711,246. Washington, DC: U.S. Patent & Trademark Office.
Reference
197
Fouda, A. S., Heakal, F. E., & Radwan, M. S. (2009). Role of some thiadiazole derivatives as inhibitors
for the corrosion of C-steel in 1 M H2SO4. Journal of Applied Electrochemistry, 39(3), 391-402.
Fouda, A. S., Moussa, M. N., Taha, F. I., & Elneanaa, A. I. (1986). The role of some thiosemicarbazide
derivatives in the corrosion inhibition of aluminium in hydrochloric acid. Corrosion science, 26(9), 719-
726.
Fu, J., Li, S., Wang, Y., Cao. L., & Lu. L. (2010). Computational and electrochemical studies of some
amino acid compounds as corrosion inhibitors for mild steel in hydrochloric acid solution. Journal of
Material Science, 45(22), 6255-6265.
Gao, B., Cao, X., & Jiu, H. (2002). Quaternization of acrylamide/vinylpyridine copolymers and some
properties. Acta Polymerica Sinica, (4), 487-492.
Gao, B., Lv, Y., & Jiu, H. (2003). Synthesis and properties of cationic polyacrylamide containing pyridine
quaternary salt. Polymer International, 52(9), 1468-1473.
Gao, B., Zhang, X., & Sheng, Y. (2008). Studies on preparing and corrosion inhibition behaviour of
quaternized polyethyleneimine for low carbon steel in sulfuric acid. Materials Chemistry & Physics,
108(2), 375-381.
Garai, S., Jaisankar, P., Singh, J. K., & Elango, A. (2012). A comprehensive study on crude methanolic
extract of Artemisia pallens (Asteraceae) and its active component as effective corrosion inhibitors of
mild steel in acid solution. Corrosion Science, 60(0), 193-204.
Geethanjali, R., & Subhashini, S. (2013). Synthesis of magnetite-containing polyaniline-polyacrylamide
nanocomposite, characterization and corrosion inhibition behavior on mild steel in acid media. Chemical
Science Transactions, doi:10.7598/cst2013.513
Gomez, H., Ram, M. K., Alvi, F., Stefanakos, E., & Kumar, A. (2010). Novel synthesis, characterization,
and corrosion inhibition properties of nanodiamond-polyaniline films. Journal of Physical Chemistry C,
114(44), 18797-18804.
Gomma, G. K., & Wahdan, M. H. (1995). Schiff bases as corrosion inhibitors for aluminium in
hydrochloric acid solution. Materials Chemistry & Physics, 39(3), 209-213.
Gönder, Z. B., Kaya, Y., Vergili, I., & Barlas, H. (2010). Optimization of filtration conditions for CIP
wastewater treatment by nanofiltration process using Taguchi approach. Separation and Purification
Technology, 70(3), 265-273.
Granese, S. L., Rosales, B. M., Oviedo, C., & Zerbino, J. O. (1992). The inhibition action of heterocyclic
nitrogen organic compounds on Fe and steel in HCl media. Corrosion science, 33(9), 1439-1453.
Guerrouani, N., Couturaud, B., Mas, A., Schué, F., & Robin, J. J. (2013). Environment-friendly synthesis
of amphiphilic polyester-graft-poly (vinyl alcohol). European Polymer Journal. 49(6), 1621-1633.
Hanb, T., & Liua, J. (2010). Facile synthesis of palmitic acid polyacrylamide and its application for steel
protection from corrosion using electrochemical determination. Procedia Engineering, 7, 404–409.
Hariharaputhran, R., Subramanian, A., Antony, A. A., Sankar, P. M., Gopalan, A., Vasudevan, T., &
Iyer, S. V. (1998). Influence of substituent groups on performance of N-benzylidine phenylamine-N-
oxide as corrosion inhibitor of mild steel in acidic solutions. British Corrosion Journal, 33(3), 214-218.
Hassan, H. H., Abdelghani, E., & Amin, M. A. (2007). Inhibition of mild steel corrosion in hydrochloric
acid solution by triazole derivatives: Part I. Polarization and EIS studies. Electrochimica acta, 52(22),
6359-6366.
Reference
198
Hayes, S., & Kinlen, P. J. (2011). U.S. Patent No. 7,935,181. Washington, DC: U.S. Patent and
Trademark Office.
Hazzazi, O. A. (2006). On the corrosion inhibition of aluminium bicarbonate buffer solutions part I:
weight loss, polarization and EDX studies. Journal of Saudi Chemical Society, 10(2), 421-428.
Hussin, M. H., & Kassim, M. J. (2011). The corrosion inhibition and adsorption behavior of Uncaria
gambir extract on mild steel in 1M HCl. Materials Chemistry and Physics, 125(3), 461-468.
Idowu, P. A. P., & Isaac, F. O. S. (2011). Environmental failure of 2m acid strength on zinc electroplated
mild steel in the presence of Nicotioana Tobacum. International Journal of Electrochemical Science,
6(10), 4798-4810.
Ita, B. I., & Offiong, O. E. (2001). The study of the inhibitory properties of benzoin, benzil, benzoin-(4-
phenylthiosemicarbazone) and benzil-(4-phenylthiosemicarbazone) on the corrosion of mild steel in
hydrochloric acid. Materials Chemistry & Physics, 70(3), 330-335.
Jevremović, I., Debeljković, A., Singer, M., Achour, M., Nešić, S., & Mišković-Stanković, V. (2012). A
mixture of dicyclohexylamine and oleylamine as a corrosion inhibitor for mild steel in NaCl solution
saturated with CO2 under both continual immersion and top of the line corrosion. Journal of the Serbian
Chemical Society, 77(8), 1047-1061.
Jeyaprabha, C., Sathiyanarayanan, S., & Venkatachari, G. (2006a). Polyaniline as corrosion inhibitor for
iron in acidic solution. Journal of Applied Polymer Science, 101(4), 2144–2153.
Jeyaprabha, C., Sathiyanarayanan, S., Phani, K. L. N. & Venkatachari, G. (2005b). Influence of
poly(aminoquinone) on corrosion inhibition of iron in acid media. Applied Surface Science, 252(4), 966–
975.
Jeyaprabha, C., Sathiyanarayanan, S., Phani, K. L. N., & Venkatachari, G. (2005a). Investigation of the
inhibitive effect of poly(diphenylamine) on corrosion of iron in 0.5M H2SO4 solutions. Journal of
Electroanalytical Chemistry, 585(2), 250-255.
Jeyaprabha, C., Sathiyanarayanan, S., Venkatachari, G. (2006b). Effect of cerium ions on corrosion
inhibition of PANI for iron in 0.5M H2SO4. Applied Surface Science, 253(2), 432-438.
Jianguo, Y., Lin, W., Otieno-Alego, V., & Schweinsberg, D. P. (1995). Polyvinylpyrrolidone and
polyethylenimine as inhibitors for the corrosion of a low carbon steel in phosphoric acid. Corrosion
science, 37(6), 975-985.
Jüttner, K. (1990). Electrochemical impedance spectroscopy (EIS) of corrosion processes on
inhomogeneous surfaces. Electrochimica Acta, 35(10), 1501-1508.
Karthikaiselvi, R. & Subhashini, S. (2012a). The water soluble composite poly(vinylpyrrolidone–
methylaniline): A new class of corrosion inhibitors of mild steel in hydrochloric acid media. Arabian
Journal of Chemistry, doi.org/10.1016/j.arabjc.2012.10.024.
Karthikaiselvi, R., & Subhashini, S. (2012b). Study of adsorption properties and inhibition of mild steel
corrosion in hydrochloric acid media by water soluble composite poly (vinyl alcohol-o-methoxy aniline).
Journal of the Association of Arab Universities for Basic & Applied Sciences,
doi.org/10.1016/j.jaubas.2013.06.002.
Karthikaiselvi, R., & Subhashini, S. (2013). Myristica frangans: A green corrosion inhibitor for mild steel
in boiler scale removal. International Journal of Research in Chemistry and Environment, 3(3), 62-69.
Reference
199
Karthikaiselvi, R., Subhashini, S., & Rajalakshmi, R. (2010). Corrosion inhibition of mild steel by water
soluble poly (vinyl pyrrolidone – aniline) in 1M HCl. International Journal of Chemistry & Applications,
2(1), 69-78.
Karthikaiselvi, R., Subhashini, S., & Rajalakshmi, R. (2011). Poly (vinyl alcohol – aniline) water soluble
composite as corrosion inhibitor for mild steel in 1 M HCl. Arabian Journal of Chemistry, 5(4), 517-522.
Kavitha, A. L., Vasudevan, T., & Gurumallesh Prabu, H. (2011). Evaluation of synthesized antiscalants
for cooling water system application. Desalination, 268(1-3), 38–45.
Keleş, H., Keleş, M., Dehri, I., & Serindağ, O. (2008). Adsorption and inhibitive properties of
aminobiphenyl and its Schiff base on mild steel corrosion in 0.5 M HCl medium. Colloids & Surfaces A:
Physicochemical & Engineering Aspects, 320(1), 138-145.
Khairou, K. S., & El-Sayed, A. (2003). Inhibition effect of some polymers on the corrosion of cadmium in
a hydrochloric acid solution. Journal of Applied Polymer Science, 88(4), 866-871.
Khairou, K. S., & Zaafarany, I. (2006). Some sulfated water soluble natural polymer (carrageenans)
compounds as corrosion inhibitors for dissolution of iron in hydrochloride acid solution. Material Science
Research India, 3(2a), 135-140.
Khairou, K. S., Alfi, A. A., & Mabrouk, E. M. (2007). Natural polymers as corrosion inhibitors for
aluminium and tin in acidic media. Material Science Research India, 4(2), 279-290.
Khaled, K. F. (2003). The inhibition of benzimidazole derivatives on corrosion of iron in 1 M HCl
solutions. Electrochimica Acta, 48(17), 2493-2503.
Khaled, M. M. (2010). The effect of molecular weight on the corrosion protection properties of
polyvinylpyrrolidone polymers on stainless steel. Arabian Journal for Science & Engineering, Section A:
Sciences, 35(1), 29-39.
Khan, M. I., Chaudhry, A. U., Hashim, S., Zahoor, M. K., & Iqbal, M. Z. (2010). Recent developments in
intrinsically conductive polymer coatings for corrosion protection. Chemical Engineering Research
Bulletin, 14(2), 73-86.
Khandpur, N., & Singh, G. (2005). Conducting polymers as corrosion inhibitors. Indian Surface
Finishing, 2(1), 118-126.
Khandpur, N., Kim, H., Bhrara, K., & Singh, G. (2007). Inhibition of mild steel corrosion in sulfuric acid
by poly vinyl pyrrolidone-iodine complex. Indian Surface Finishing, 4(1), 28-35.
Khramov, A. N., Voevodin, N. N., Balbyshev, V. N., & Mantz, R. A. (2005). Sol–gel-derived corrosion-
protective coatings with controllable release of incorporated organic corrosion inhibitors. Thin Solid
Films, 483(1), 191-196.
Kim, D. K., Muralidharan, S., Ha, T. H., Bae, J. H., Ha, Y. C., Lee, H. G., & Scantlebury, J. D. (2006).
Electrochemical studies on the alternating current corrosion of mild steel under cathodic protection
condition in marine environments. Electrochimica Acta, 51(25), 5259-5267.
Kim, Y. W., Kim, J. G., & Choi, D. J. (2001). Development of a blended corrosion, scale, and
microorganism inhibitor for open recirculating cooling systems. Materials & Corrosion, 52(9), 697-704.
Koehan, F. L., Dixon, B. G., & Cole, D. E. (1999). New low toxicity, multi-metal active vapor phase
corrosion inhibitors. CORROSION, NACE International, San Antonio, Tx. 99, ID- 99495.
Kuznetsov, Y. I. (2012). New possibilities of metal corrosion inhibition by organic heterocyclic
compounds. International Journal of Corrosion & Scale Inhibition, 1(1), 3-15.
Reference
200
Lagrenee, M., Mernari, B., Bouanis, M., Traisnel, M., & Bentiss, F. (2002). Study of the mechanism and
inhibiting efficiency of 3, 5-bis (4-methylthiophenyl)-4H-1, 2, 4-triazole on mild steel corrosion in acidic
media. Corrosion Science, 44(3), 573-588.
Laidler, K. J. (1963). Reaction Kinetics, Vol. 1, Homogeneous gas reactions (pp. Ch-2). Oxford:
Pergamon Press.
Lebrini, M., Bentiss, F., Chihib, N. E., Jama, C., Hornez, J. P., & Lagrenée, M. (2008). Polyphosphate
derivatives of guanidine and urea copolymer: Inhibiting corrosion effect of Armco iron in acid solution
and antibacterial activity. Corrosion Science, 50(10), 2914-2918.
Lebrini, M., Lagrene´e, M., Vezin, H., Traisnel, M. & Bentiss, F. (2007). Experimental and theoretical
study for corrosion inhibition of mild steel in normal hydrochloric acid solution by some new macrocyclic
polyether compounds. Corrosion Science, 49(5), 2254–2269.
Li, W. H., He, Q., Zhang, S. T., Pei, C. L., & Hou, B. R. (2008). Some new triazole derivatives as
inhibitors for mild steel corrosion in acidic medium. Journal of Applied Electrochemistry, 38(3), 289-295.
Li, X., & Mu, G. (2005). Tween-40 as corrosion inhibitor for cold rolled steel in sulphuric acid: weight
loss study, electrochemical characterization, and AFM. Applied Surface Science, 252(5), 1254-1265.
Li, Y. J., Wu, B., Zeng, X. P., Liu, Y. F., Ni, Y. M., Zhou, G. D., & Ge, H. H. (2002). The voltammetry–
photocurrent response study of passivation of carbon steel in slightly alkaline solutions containing the
corrosion inhibitor phosphor-polymaleic acid–ZnSO4. Thin solid films, 405(1), 153-161.
Li, Y., Zhao, P., Liang, Q., & Hou, B. (2005). Berberine as a natural source inhibitor for mild steel in 1M
H2SO4. Applied Surface Science, 252(5), 1245-1253.
Lorenz, W. J., & Mansfeld, F. (1981). Determination of corrosion rates by electrochemical DC and AC
methods. Corrosion Science, 21(9), 647-672.
Machnikova, E., Whitmire, K. H., & Hackerman, N. (2008). Corrosion inhibition of carbon steel in
hydrochloric acid by furan derivatives. Electrochimica Acta, 53(20), 6024-6032.
Manickavagam, R., Jaya Karthik, K., Paramasivam, M., & Venkatakrishn Iyer, S. (2002). Poly (styrene
sulphonic acid)-doped polyaniline as an inhibitor for the corrosion of mild steel in hydrochloric acid. Anti
Corrosion Methods & Materials, 49(1), 19-26.
Manimaran, N., Rajendran. S., Manivannan, M., & Mary. S. (2012). Corrosion Inhibition of Carbon Steel
by Polyacrylamide. Research Journal of Chemical Sciences, 2(3), 52-57.
Manivel, P., & Venkatachari, G. (2006). The inhibitive effect of para-amino benzoic acid and its polymer
on corrosion of iron in 1 mol/L HCl solution. Journal of Materials Science & Technology, 22(3), 301-305.
Manivel, P., & Venkatachari, G. (2007). The inhibitive effect of poly(p-toluidine) on corrosion of iron in
1M HCl solutions. Journal of Applied Polymer Science, 104(4), 2595-2601.
Manivel, P., Sathiyanarayanan, S., & Venkatachari, G. (2007). Influence of H+ and Cl
- ions on inhibitive
performance of poly(aniline) for iron corrosion in acid. Journal of Applied Polymer Science, 106(6),
3988-3993.
Mansfeld, F. (1990). Electrochemical impedance spectroscopy (EIS) as a new tool for investigating
methods of corrosion protection. Electrochimica Acta, 35(10), 1533-1544.
Mansfeld, F. (Ed.). (1987). Corrosion mechanisms (Vol. 28). CRC Press.
Mansfeld, F., & Inman, R. V. (1979). A Versatile, Inexpensive Potentiostat for Corrosion Studies.
Corrosion, 35(1), 21-23.
Reference
201
Mansfeld, F., Kendig, M. W., & Lorenz, W. J. (1985). Corrosion inhibition in neutral, aerated media.
Journal of the Electrochemical Society, 132(2), 290-296.
Mansfeld, F., Kendig, M. W., & Tsai, S. (1982). Recording and analysis of AC impedance data for
corrosion studies. Corrosion, 38(11), 570-580.
Martinez, S., & Metikoš-Huković, M. (2003). A nonlinear kinetic model introduced for the corrosion
inhibitive properties of some organic inhibitors. Journal of Applied Electrochemistry, 33(12), 1137-1142.
Mayanna, S. M., & Setty, T. H. V. (1975). Effect of Benzotriazole on the dissolution of copper single
crystal planes in dilute sulphuric acid. Corrosion Science, 15(6), 627-637.
McCafferty, E., & Hackerman, N. (1972a). Double layer capacitance of iron and corrosion inhibition with
polymethylene diamines. Journal of the Electrochemical Society, 119(2), 146-154.
McCafferty, E., & Hackerman, N. (1972b). Kinetics of iron corrosion in concentrated acidic chloride
solutions. Journal of the Electrochemical Society, 119(8), 999-1009.
Meena, B. V., Anthony, N., Mangayarkarasi, K., Jayaram, P., & Rajendran, S. (2000). Kinetics of
Corrosion of Carbon Steel in the Presence of CMC. Proceedings of Tenth National Congress on
Corrosion Control, NCCI, & CECRI Karaikudi, 241–247.
Metikoš-Huković, M., Babić, R., & Grubač, Z. (2002). The study of aluminium corrosion in acidic solution
with nontoxic inhibitors. Journal of Applied Electrochemistry, 32(1), 35-41.
Migahed, M. A., Aly, R. O., & Al-Sabagh, A. M. (2004). Impact of gamma-ray pre-irradiation on the
efficiency of corrosion inhibition of some novel polymeric surfactants. Corrosion Science, 46(10), 2503-
2516.
Morad, M. S. (2000). An electrochemical study on the inhibiting action of some organic phosphonium
compounds on the corrosion of mild steel in aerated acid solutions. Corrosion science, 42(8), 1307-
1326.
Moretti, G., Quartarone, G., Tassan, A., & Zlngales, A. (1996). 5-Amino-and 5-chloro-indole as mild
steel corrosion inhibitors in 1 N sulphuric acid. Electrochimica Acta, 41(13), 1971-1980.
Mu, G., Li, X., & Liu, G. (2005). Synergistic inhibition between Tween 60 and NaCl on the corrosion of
cold rolled steel in 0.5 M sulfuric acid. Corrosion science, 47(8), 1932-1952.
Muhamath, B. M. A., & Kulanthai, K. (2009). Inhibition Effect of Parthenium Hystophrous L extracts on
the corrosion of mild steel in sulphuric acid. Journal of Applied Sciences & Environmental Management,
13(1), 27-36.
Müller, B. (2002). Adsorption and corrosion inhibition of aluminium by polymers. Adhaesion-Kleben &
Dichten, 46(6), 34-38.
Müller, B., & Imblo, G. (1996). Styrene copolymers with carboxyl groups as corrosion inhibitors for zinc
pigments in aqueous alkaline media. Journal of applied polymer science, 59(1), 57-62.
Müller, B., & Triantafillidis, D. (2001). Polymeric corrosion inhibitors for copper and brass pigments.
Journal of Applied Polymer Science, 80(3), 475-483.
Müller, B., Paulus, A., Lettmann, B., & Poth, U. (1998). Amphiphilic maleic acid copolymers as corrosion
inhibitors for aluminum pigment. Journal of Applied Polymer Science, 69(11), 2169–2174.
Muralidharan, S., Quraishi, M. A., & Iyer, S. V. K. (1995). The effect of molecular structure on hydrogen
permeation and the corrosion inhibition of mild steel in acidic solutions. Corrosion Science, 37(11),
1739-1750.
Reference
202
Negm, N. A., & Zaki, M. F. (2008). Corrosion inhibition efficiency of nonionic Schiff base amphiphiles of
p-aminobenzoic acid for aluminum in 4N HCl. Colloids & Surfaces A: Physicochemical & Engineering
Aspects, 322(1), 97-102.
Negm, N. A., & Zaki, M. F. (2009). Synthesis and characterization of some amino acid derived Schiff
bases bearing nonionic species as corrosion inhibitors for carbon steel in 2N HCl. Journal of Dispersion
Science & Technology, 30(5), 649-655.
Nik, W. W., Sulaiman, O., Giap, S. E., & Rosliza, R. (2010). Evaluation of inhibitive action of sodium
benzoate on corrosion behaviour of AA6063 in seawater. International Journal of Technology, 1, 20‐28.
Noor, E. A., & Al-Moubaraki, A. H. (2008). Thermodynamic study of metal corrosion and inhibitor
adsorption processes in mild steel/1-methyl-4 [4′(-X)-styryl pyridinium iodides/hydrochloric acid systems.
Materials Chemistry & Physics, 110(1), 145-154.
Obot, I. B., & Obi-Egbedi, N. O. (2010). 2, 3-Diphenylbenzoquinoxaline: a new corrosion inhibitor for
mild steel in sulphuric acid. Corrosion Science, 52(1), 282-285.
Obot, I. B., Obi-Egbedi, N. O., & Umoren, S. A. (2009). Adsorption characteristics and corrosion
inhibitive properties of clotrimazole for aluminium corrosion in hydrochloric acid. International Journal of
Electrochemical Science, 4(6), 863-877.
Öğretir, C., Mihci, B., & Bereket, G. (1999). Quantum chemical studies of some pyridine derivatives as
corrosion inhibitors. Journal of Molecular Structure: THEOCHEM, 488(1), 223-231.
Oguzie, E. E. (2006). Studies on the inhibitive effect of Occimum viridis extract on the acid corrosion of
mild steel. Materials Chemistry & Physics, 99(2), 441-446.
Oguzie, E. E. (2008). Corrosion inhibitive effect and adsorption behaviour of Hibiscus sabdariffa extract
on mild steel in acidic media. Portugaliae Electrochimica Acta, 26(3), 303-314.
Okafor, P. C., Ikpi, M. E., Uwah, I. E., Ebenso, E. E., Ekpe, U. J., & Umoren, S. A. (2008). Inhibitory
action of i Phyllanthus amarus. extracts on the corrosion of mild steel in acidic media. Corrosion
Science, 50(8), 2310-2317.
Olusegun, A. K., Oforka, N. C., & Ebenso, E. E. (2004). The inhibition of mild steel corrosion in an acidic
medium by the juice of Citrus paradisi (Grapefruit). The Journal of Corrosion Science & Engineering,
8(5), 1-10.
Othman, N., azahari, N. A., & ismail, H. (2011). Thermal Properties of Polyvinyl Alcohol (PVOH)/Corn
Starch Blend Film. Malaysian Polymer Journal, 6(6), 147-154.
Oyaizu, K., Yamaguchi, A., Hayashi, T., Nakamura, Y., Yoshii, D., Ito, Y., & Yuasa, M. (2006).
Controlled oxidation of dextran for evolution of polyether segment bearing pendant carboxyl groups for
corrosion inhibition applications. Polymer Journal, 38(4), 343-348.
Özcan, M., Karadağ, F., & Dehri, I. (2008). Interfacial behavior of cysteine between mild steel and
sulfuric acid as corrosion inhibitor. Acta Physico-Chimica Sinica, 24(8), 1387-1392.
Pal, K., Banthia, A. K., & Majumdar, D. K. (2007). Biomedical evaluation of polyvinyl alcohol–gelatin
esterified hydrogel for wound dressing. Journal of Materials Science: Materials in Medicine, 18(9), 1889-
1894.
Patachia, S., Savin, G., Luca, C., & Beldie, C. (2001). On the electrochemical corrosion inhibition. II.
Effect of the polyvinylimidazole and some of its derivatives. Analele Stiintifice ale Universitatii "Al. I.
Cuza" din Iasi, Chimi, 9, 219-224.
Reference
203
Poongothai, N., Rajendran, P., Natesan, M., & Palaniswamy, N. (2005). Wood bark oils as vapour
phase corrosion inhibitors for metals in NaCl and SO2 environments. Indian Journal of Chemical
Technology, 12(6), 641.
Prakash, S., Rao, C. R., & Vijayan, M. (2008). New polyaniline (PAni)-polyelectrolyte (PDDMAC)
composites: Synthesis and applications. Electrochimica Acta, 53(18), 5704-5710.
Praveen, B. M., Venkatesha, T. V., Arthoba Naik, Y., & Prashantha, K., (2007). Corrosion studies of
carbon nanotubes–Zn composite coating. Surface & Coatings Technology, 201(12), 5836-5842.
Quaraishi, M. A., Shukla, S. K., & Ebenso, E. E. (2012). Ketorol: New and effective corrosion inhibitor
for mild steel in hydrochloric acid solution, International Journal of Electrochemical Science, 7(10),
9920–9932.
Quraishi, M. A., & Shukla, S. K. (2009). Poly(aniline-formaldehyde): A new and effective corrosion
inhibitor for mild steel in hydrochloric acid. Materials Chemistry & Physics, 113(2), 685–689.
Quraishi, M. A., Farooqi, I. H., & Saini, P. A. (1999). Investigation of some green compounds as
corrosion and scale inhibitors for cooling systems. Corrosion, 55(5), 493-497.
Raja, P. B., & Sethuraman, M. G. (2008). Natural products as corrosion inhibitor for metals in corrosive
media — A review. Materials Letters, 62(1), 113-116.
Rajalakshmi, R., Prithiba, A., & Leelavathi, S. (2012). An overview of emerging scenario in the frontiers
of eco-friendly corrosion inhibitors of plant origin for Mild Steel. Journal of Chemica Acta, 1(1), 6-13.
Rajan, K. P., Veena, N. R., Singh, P., & Nando, G. B. (2010). Optimization of processing parameters for
a polymer blend using Taguchi method. Yanbu Journal of Engineering and Science, 1, 59-67.
Rajendran, A. (2011). Isolation, characterization, pharmacological and corrosion inhibition studies of
flavonoids obtained from Nerium oleander and Tecoma stans. International Journal of PharmTech
Research, 3(2), 1005-1013.
Rajendran, S., Apparao, B. V. & Palaniswamy, N. (1998). Synergistic and antagonistic effects existing
among polyacrylamide, phenyl phosphonate and Zn2+
on the inhibition of corrosion of mild steel in a
neutral aqueous environment. Electrochimica Acta, 44(2-3), 533-537.
Rajendran, S., Sridevi, S. P., Anthony, N., Amalraj, A. J., & Sundaravadivelu, M. (2005). Corrosion
behaviour of carbon steel in polyvinyl alcohol. Anti-Corrosion Methods & Materials, 52(2), 102-107.
Ren, Y., Luo, Y., Zhang, K., Zhu, G., & Tan, X. (2008). Lignin terpolymer for corrosion inhibition of mild
steel in 10% hydrochloric acid medium. Corrosion Science, 50(11), 3147-3153.
Riggs Jr, O. L., & Hurd, R. M. (1967). Temperature coefficient of corrosion inhibition. Corrosion, 23(8),
252-260.
Robert, G. K., John, R. S., David, W. S., & Rudolph, G. B. (2003). Electrochemical Techniques in
Corrosion Science and Engineering. New York, Marcel Dekker, USA.
Ross, P. J. (1995). Taguchi techniques for quality engineering (2nd ed'95).
Şahin, M., Bilgic, S., & Yılmaz, H. (2002). The inhibition effects of some cyclic nitrogen compounds on
the corrosion of the steel in NaCl mediums. Applied Surface Science, 195(1), 1-7.
Saleh, R. M., & Shams El Din, A. M. (1972). Efficiency of organic acids and their anions in retarding the
dissolution of aluminium. Corrosion Science, 12(9), 689-697.
Şanlı, O., Ay, N., & Işıklan, N. (2007). Release characteristics of diclofenac sodium from poly (vinyl
alcohol)/sodium alginate and poly (vinyl alcohol)-grafted-poly (acrylamide)/sodium alginate blend beads.
European Journal of Pharmaceutics and Biopharmaceutics, 65(2), 204-214.
Reference
204
Sanyal, B. (1981). Organic compounds as corrosion inhibitors in different environments - A review.
Progress in Organic Coatings, 9(2), 165-236.
Saremi, M., Dehghanian, C., & Sabet, M. M. (2006). The effect of molybdate concentration and
hydrodynamic effect on mild steel corrosion inhibition in simulated cooling water. Corrosion Science,
48(6), 1404-1412.
Sathiyanarayanan, S., Balakrishnan, K., Dhawan, S. K., & Trivedi, D. C. (1994). Prevention of corrosion
of iron in acidic media using poly(o-methoxy-aniline). Corrosion science, 39(6), 831-837.
Sathiyanarayanan, S., Dhawan, S. K., Trivedi, D. C., & Balakrishnan, K. (1992). Soluble conducting poly
ethoxy aniline as an inhibitor for iron in HC1. Corrosion Science, 33(12), 1831-1841.
Sedahmed, G. H., Nagy, S. M., & El-Kholy, N. S. (1982). Effect of drag reducing polymers on the rate of
mass transfer in relation to their use as corrosion inhibitors in pipelines under turbulent flow conditions.
Journal of Applied Electrochemistry, 12(4), 479-485.
Sekine, I., Sanbongi, M., Hagiuda, H., Oshibe, T., Yuasa, M., Imahama, T., & Wake, T. (1992).
Corrosion inhibition of mild steel by cationic and anionic polymers in cooling water system. Journal of
the Electrochemical Society, 139(11), 3167-3173.
Shokry, H., Yuasa, M., Sekine, I., Issa, R. M., El-Baradie, H. Y., & Gomma, G. K. (1998). Corrosion
inhibition of mild steel by schiff base compounds in various aqueous solutions: part 1. Corrosion
science, 40(12), 2173-2186.
Shukla, J., & Pitre, K. S. (2005). Corrosion & inhibition kinetics of PVA polymer on carbon steel in
sulfuric acid solution. Indian Journal of Chemistry Section A: Inorganic, Physical, Theoretical &
Analytical Chemistry, 44(11), 2270-2273.
Shukla, J., Pitre, K. S., & Jain, P. (2003). Inhibitive effect of PEG on the corrosion of aluminium in acidic
medium. Indian Journal of Chemistry Section A: Inorganic, Physical, Theoretical, Analytical, Chemistry,
42(11), 2784-2787.
Shukla, S. K. & Ebenso, E. E. (2011). Corrosion inhibition, adsorption behavior and thermodynamic
properties of streptomycin on mild steel in hydrochloric acid medium, International Journal of
Electrochemical Science, 6(8), 3277–3291.
Shukla, S. K., & Quraishi, M. A. (2009). 4-Substituted anilinomethylpropionate: New and efficient
corrosion inhibitors for mild steel in hydrochloric acid solution. Corrosion Science, 51(9), 1990-1997.
Shukla, S. K., & Quraishi, M. A. (2012). Effect of Some Substituted Anilines-Formaldehyde Polymers on
Mild Steel Corrosion in Hydrochloric Acid Medium. Journal of Applied Polymer Science, 124(6), 5130–
5137.
Shukla, S. K., Quraishi, M. A. & Rajiv Prakash, (2008). A self doped conducting polymer ‗‗polyanthranilic
acid‖: An efficient corrosion inhibitor for mild steel in acidic solution. Corrosion Science, 50(10), 2867–
2872.
Singh, A. K., & Quraishi, M. A. (2011). Investigation of the effect of disulfiram on corrosion of mild steel
in hydrochloric acid solution. Corrosion Science, 53(4), 1288-1297.
Singh, A. K., Ebenso, E. E., & Quraishi, M. A. (2012). Adsorption behaviour of cefapirin on mild steel in
hydrochloric acid solution. International Journal of Electrochemical Science, 7(3), 2320.
Singh, A. K., Shukla, S. K., Singh, M., & Quraishi, M. A. (2011). Inhibitive effect of ceftazidime on
corrosion of mild steel in hydrochloric acid solution. Materials Chemistry & Physics, 129(1), 68-76.
Reference
205
Singh, A., Ahamad, I., Singh, V. K., & Quraishi, M. A. (2011). Inhibition effect of environmentally benign
Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution. Journal
of Solid State Electrochemistry, 15(6), 1087-1097.
Singh, A., Singh, V. K., & Quraishi, M. A. (2010). Aqueous extract of kalmegh (Andrographis paniculata)
leaves as green inhibitor for mild steel in hydrochloric acid solution. International Journal of Corrosion,
2010, Article ID 275983, doi:10.1155/2010/275983
Singh, M. R., Bhrara, K., & Singh, G. (2008). The inhibitory effect of diethanolamine on corrosion of mild
steel in 0.5 M sulphuric acidic medium. Portugaliae Electrochimica Acta, 26(6), 479-492.
Solmaz, R., Kardaş, G., & Erbil, M. (2008). Adsorption and corrosion inhibitive properties of 2-amino-5-
mercapto-1, 3, 4-thiadiazole on mild steel in hydrochloric acid media. Colloids and Surfaces A:
Physicochemical and Engineering Aspects, 312(1), 7-17.
Solomon, M. M., Umoren, S. A., Udosoro, I. I., & Udoh, A. P. (2010). Inhibitive and adsorption behaviour
of carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution. Corrosion Science, 52(4),
1317–1325.
Song, Z. L., Wang, H., Zhang, X., Wu, X. D., Li, J. Z., & Dai, D. (2009). Anticorrosion Behaviors of
Quaternary Polyethyleneimine in Acidic Environment. In Materials Science Forum, 610, 136-141.
Soror, T. K. (2004). New naturally occurring product extract as corrosion inhibitor for 316 stainless steel
in 5% HCl. Journal of Material Science & Technology, 20(4), 463–466.
Srikanth, A. P., Lavanya, A., Nanjundan, S., & Rajendran, N. (2006). Synthesis, characterization, and
corrosion protection properties of poly(N-(methacryloyloxymethyl) benzotriazole-co-methyl
methacrylate) on mild steel. Applied Surface Science, 253(4), 1810-1816.
Srimathi, M., Rajalakshmi, R., & Subhashini, S. (2011). Polyvinyl alcohol-anthranilic acid composite as
corrosion inhibitor for mild steel. Asian Journal of Chemistry, 23(1), 273-277.
Srivastava, V., Banerjee, S., & Singh, M. M. (2010). Inhibitive effect of polyacrylamide grafted with
fenugreek mucilage on corrosion of mild steel in 0.5 M H2SO4 at 35° C. Journal of Applied Polymer
Science, 116(2), 810-816.
Subasria, R., Shinoharaa, T., & Morib, K. (2005). Modified TiO2 coatings for cathodic protection
applications. Science & Technology of Advanced Material, 6(5), 501-507.
Subhashini, S., & Sabirneeza. A. A. (2011). Gravimetric and electrochemical investigation of water
soluble poly(vinyl alcohol- threonine) as corrosion inhibitor for mild steel. Proceedings of WCECS, San
Francisco, USA, Vol-II, 657-662.
Subhashini, S., Rajalakshmi, R., Prithiba, A., & Mathina, A. (2010). Corrosion mitigating effect of
Cyamopsis Tetragonaloba seed extract on mild steel in acid medium. Journal of Chemistry, 7(4), 1133-
1137.
Tager, A. A., & Tsilipotkina, M. V. (1978). The porous structure of polymers and the mechanism of
sorption. Russian Chemical Reviews, 47(1), 83-97.
Tan, Y. J., Bailey, S., & Kinsella, B. (1996). An investigation of the formation and destruction of
corrosion inhibitor films using electrochemical impedance spectroscopy (EIS). Corrosion Science, 38(9),
1545-1561.
Tang, C., Rohani, J. M., & Yajid, M. A. M. (2013). Characterization of green corrosion inhibitor using
Taguchi dynamic approach. International Journal of Electrochemical Science, 8(6), 7991-8004.
Reference
206
Tang, L., Li, X., Li, L., Mu, G., & Liu, G. (2006). Interfacial behavior of 4-(2-pyridylazo) resorcin between
steel and hydrochloric acid. Surface & Coatings Technology, 201(1), 384-388.
Thakore, I. M., Desai, S., Sarawade, B. D., & Devi, S. (2001). Studies on biodegradability, morphology
and thermo-mechanical properties of LDPE/modified starch blends. European Polymer Journal, 37(1),
151-160.
Touir, R., Cenoui, M., El Bakri, M., & Ebn Touhami, M. (2008). Sodium gluconate as corrosion and
scale inhibitor of ordinary steel in simulated cooling water. Corrosion Science, 50(6), 1530-1537.
Touir, R., Dkhireche, N., Ebn Touhami, M., Lakhrissi, M., Lakhrissi, B., & Sfaira, M. (2009). Corrosion
and scale processes and their inhibition in simulated cooling water systems by monosaccharides
derivatives: Part I: EIS study. Desalination, 249(3), 922-928.
Trasatti, S. (1971). Work function, electronegativity, and electrochemical behaviour of metals: II.
Potentials of zero charge and ―electrochemical‖ work functions. Journal of Electroanalytical Chemistry &
Interfacial Electrochemistry, 33(2), 351-378.
Tudorachi, N., & Lipsa, R. (2011). Poly (vinyl alcohol)‐g‐lactic acid copolymers and films with silver
nanoparticles. Journal of Applied Polymer Science, 122(2), 1109-1120.
Tudorachi, N., Cascaval, C. N., Rusu, M., & Pruteanu, M. (2000). Testing of polyvinyl alcohol and starch
mixtures as biodegradable polymeric materials. Polymer testing, 19(7), 785-799.
Uhlig, & Herbert H. (Herbert Henry) (1971). Corrosion and corrosion control: An introduction to
corrosion science and engineering (2nd edn). Wiley, New York.
Umoren, S. A. (2009a). Polymers as Corrosion Inhibitors for Metals in Different Media - A Review. Open
Corrosion Journal, 2, 175-188.
Umoren, S. A. (2009b). Corrosion inhibition of aluminum alloy 3SR in HCl by polyvinylpyrrolidone and
polyacrylamide: effect of molecular structure on inhibition efficiency. Surface Review & Letters, 16(6),
831-844.
Umoren, S. A. (2011). Synergistic inhibition effect of polyethylene glycol–polyvinyl pyrrolidone blends for
mild steel corrosion in sulphuric acid medium. Journal of Applied Polymer Science, 119(4), 2072–2084.
Umoren, S. A., Ebenso, E. E., & Ogbobe, O. (2009). Synergistic effect of halide ions and polyethylene
glycol on the corrosion inhibition of aluminium in alkaline medium. Journal of Applied Polymer Science,
113(6), 3533–3543.
Umoren, S. A., Ebenso, E. E., Okafor, P. C., & Ogbobe, O. (2006a). Water soluble polymers as
corrosion inhibitors. Pigment & Resin Technology, 35(6), 346-352.
Umoren, S. A., Ebenso, E. E., Okafor, P. C., Ekpe, U. J., & Ogbobe, O. (2007b). Effect of halide ions on
the corrosion inhibition of aluminium in alkaline medium using polyvinyl alcohol. Journal of Applied
Polymer Science, 103(5), 2810-2816.
Umoren, S. A., Li, Y., & Wang, F. H. (2010a). Electrochemical study of corrosion inhibition and
adsorption behaviour for pure iron by polyacrylamide in H2SO4: Synergistic effect of iodide ions.
Corrosion Science, 52(5), 1777–1786.
Umoren, S. A., Li, Y., & Wang, F. H. (2010b). Synergistic effect of iodide ion and polyacrylic acid on
corrosion inhibition of iron in H2SO4 investigated by electrochemical techniques. Corrosion Science,
52(7), 2422–2429
Reference
207
Umoren, S. A., Ogbobe, O., Ebenso, E. E., & Ekpe, U. J. (2006b). Effect of halide ions on the corrosion
inhibition of mild steel in acidic medium using polyvinyl alcohol. Pigment & resin technology, 35(5), 284-
292.
Umoren, S. A., Ogbobe, O., Igwe, I. O., & Ebenso, E. E. (2008). Inhibition of mild steel corrosion in
acidic medium using synthetic and naturally occurring polymers and synergistic halide additives.
Corrosion Science, 50(7), 1998–2006.
Umoren, S. A., Ogbobe, O., Okafor, P. C., & Ebenso, E. E. (2007a). Polyethylene glycol and polyvinyl
alcohol as corrosion inhibitors for aluminium in acidic medium. Journal of Applied Polymer Science,
105(6), 3363–3370.
Umoren, S. A., Solomon, M. M., Udosoro, I. I., & Udoh, A. P. (2010c). Synergistic and antagonistic
effects between halide ions and carboxymethyl cellulose for the corrosion inhibition of mild steel in
sulphuric acid solution. Cellulose, 17(3), 635–648.
Vakili Azghandi, M., Davoodi, A., Farzi, G. A., & Kosari, A. (2012). Water-base acrylic terpolymer as a
corrosion inhibitor for SAE1018 in simulated sour petroleum solution in stagnant and hydrodynamic
conditions. Corrosion Science, 64(0), 44–54.
Vatsala, S., Bansal, V., Tuli, D. K., Rai, M. M., Jain, S. K., Srivastava, S. P., & Bhatnagar, A. K. (1994).
Gas chromatographic determination of residual hydrazine and morpholine in boiler feed water and
steam condensates. Chromatographia, 38(7-8), 456-460.
Villamil, R. F., Corio, P., Agostinho, S. M., & Rubim, J. C. (1999). Effect of sodium dodecylsulfate on
copper corrosion in sulfuric acid media in the absence and presence of benzotriazole. Journal of
Electroanalytical Chemistry, 472(2), 112-119.
Wahyuningrum, D., Achmad, S., Syah, Y. M., & Buchari, B. B., and Ariwahjoedi, B. (2008). The
correlation between structure and corrosion inhibition activity of 4, 5-diphenyl-1-vinylimidazole derivative
compounds towards mild steel in 1% NaCl solution. International Journal of Electrochemical Science,
3(2), 154-166.
Wu, J., Wang, N., Wang, L., Dong, H., Zhao, Y., & Jiang, L. (2012). Unidirectional water-penetration
composite fibrous film via electrospinning. Soft Matter, 8(22), 5996-5999.
Xu, Y., Zhang, B., Zhao, L., & Cui, Y. (2013). Synthesis of polyaspartic acid/5-aminoorotic acid graft
copolymer and evaluation of its scale inhibition and corrosion inhibition performance. Desalination, 311,
156-161.
Yadav, A. K., & Singh, G. (2004). Corrosion inhibition by some organic polymers. Journal of the
Electrochemical Society of India, 53(4), 125-128.
Yang, W., & Liu, R. (2010). Effects of polymers on extending surface area for DC etched aluminum foil.
Cailiao Kexue Yu Gongcheng Xuebao, 28(3), 434-438.
Yurt, A., Bütün, V., & Duran, B. (2007). Effect of the molecular weight and structure of some novel
water-soluble triblock copolymers on the electrochemical behaviour of mild steel. Materials Chemistry &
Physics, 105(1), 114-121.
Zaafarany, I. (2006). Inhibition of acidic corrosion of iron by some carrageenan compounds. Current
World Environment, 1(2), 101-108.
Zarrok, H., Al-Deyab, S. S., Zarrouk, A., Salghi, R., Hammouti, B., Oudda, H., Bouachrine, M. &
Bentiss, F. (2012). Thermodynamic Characterisation and Density Functional Theory Investigation of 1,
Reference
208
1', 5, 5'-Tetramethyl-1H, 1'H-3, 3'-Bipyrazole as Corrosion Inhibitor of C38 Steel Corrosion in HCl.
International Journal of Electrochemical Science, 7(5).
Zarrouk, A., Hammouti, B., Zarrok, H., Al-Deyab, S. S., & Messali, M. (2011). Temperature effect,
activation energies and thermodynamic adsorption studies of l-cysteine methyl ester hydrochloride as
copper corrosion inhibitor in nitric acid 2M. International Journal of Electrochemical Science, 6(12),
6261-6274.
Zhang, X., Wu, X., & Gao, B. (2011). Studies of cationic property of quaternary polyethyleneimine.
Materials Science Forum: Materials Modeling, Simulation, & Characterization, 689, 432-439.
Zhao, P., Liang, Q., & Li, Y. (2005). Electrochemical, SEM/EDS and quantum chemical study of
phthalocyanines as corrosion inhibitors for mild steel in 1 mol/l HCl. Applied Surface Science, 252(5),
1596-1607.
Zidan, H. M. (2003). Electron spin resonance and ultraviolet spectral analysis of UV‐irradiated PVA films
filled with MnCl2 and CrF3. Journal of applied polymer science, 88(1), 104-111.
Zucchi, F., Brunoro, G., & Trabanelli, G. (1977). Corrosion and Inhibition Tests on copper‐base alloy
tubes in flowing conditions. Materials and Corrosion, 28(12), 834-837.