Embed Size (px)
Citation preview
3 Product sheet, Specialty gas
® HiQ and REDLINE are registered trademarks of The Linde Group.
REDLINE® Cylinder regulators C 200/1. Single stage regulator.
3 Product sheet, Specialty gas
Description
C 200/1A.
C 200/1 is a single stage cylinder regulator, especially suitable for specialty gases where demands on purity,
tightness and safety are high. A single stage regulator is preferred where the primary pressure is fairly constant
(e.g. for gases in liquid phase). C 200/1 can be plain or equip ped with a shut-off valve (type A), a metering
valve (type B) or equipped for purging of the high pressure side (type P) or cross-purge (type XP).
Product name bar psi HiQ® code
C 200/1, brass 0.2–3 3–45 4451
C 200/1, brass 0.5–6 8–85 5465
C 200/1, brass 2.5–14 35–200 5466
C 200/1, brass 2.5–50 35–725 4453
C 200/1, brass 10–200 150–3,000 4454
C 200/1, stainless steel 0.2–3 3–45 4455
C 200/1, stainless steel 0.5–6 8–85 5473
C 200/1, stainless steel 2.5–14 35–200 5474
C 200/1, stainless steel 2.5–50 35–725 4457
C 200/1, stainless steel 10–200 150–3,000 4458
C 200/1 A, brass 0.2–3 3–45 3100
C 200/1 A, brass 0.5–6 8–85 5467
C 200/1 A, brass 2.5–14 35–200 5468
C 200/1 A, brass 2.5–50 35–725 3102
C 200/1 A, brass 10–200 150–3,000 3103
C 200/1 A, stainless steel 0.2–3 3–45 3112
C 200/1 A, stainless steel 0.5–6 8–85 5475
C 200/1 A, stainless steel 2.5–14 35–200 5476
C 200/1 A, stainless steel 2.5–50 35–725 3114
C 200/1 A, stainless steel 10–200 150–3,000 3115
C 200/1 B, brass 0.2–3 3–45 3104
C 200/1 B, brass 0.5–6 8–85 5469
C 200/1 B, brass 2.5–14 35–200 5470
C 200/1 B, stainless steel 0.2–3 3–45 3116
C 200/1 B, stainless steel 0.5–6 8–85 5477
C 200/1 B, stainless steel 2.5–14 35–200 5478
2 of 2
Linde AGLinde Gases Division, Seitnerstrasse 70, D-82049 Pullach, Germany Phone +49.89.74 46 1661, Fax +49.89.74 46-2071, e-mail: [email protected], http://hiq.linde-gas.com.
3 REDLINE® Cylinder regulators C 200/1. Single stage regulator.
1011 – GDP Subject to change.
cont...
Technical data
All measurements in millimeters.
Type P. Drawings of other types
available on request.
Max primary pressure 230 bar 3,300 psi
Outlet pressure 0.2–3 bar 3–45 psi
0.5–6 bar 8–85 psi
2.5–14 bar 35–200 psi
2.5–50 bar 35–725 psi
10–200 bar 150–3,000 psi
Outlet gauge range –1–5 bar –14.5–75 psi
–1–10 bar –14.5–145 psi
0–25 bar 0–360 psi
0–80 bar 0–1,150 psi
0–315 bar 0–4,500 psi
Stability When the inlet pressure
drops by 10 bar, 145 psi
the outlet pressure rises
by less than 0.1 bar, 1.5 psi.
Connection Out = NPT ¼” female
Operating temperature –40 – +50°C –40 – +122°F
Weight 1.3 kg 2.9 lb
Material
Housing Brass, Ni/Cr plated
Stainless steel 316L
Seals PVDF PCTFE
Membrane Hastelloy®
Seating PCTFE
Product name bar psi HiQ® code
C 200/1 P, brass 0.2–3 3–45 3108
C 200/1 P, brass 0.5–6 8–85 5471
C 200/1 P, brass 2.5–14 35–200 5472
C 200/1 P, brass 2.5–50 35–725 3110
C 200/1 P, brass 10–200 150–3,000 3111
C 200/1 P, stainless steel 0.2–3 3–45 3120
C 200/1 P, stainless steel 0.5–6 8–85 5479
C 200/1 P, stainless steel 2.5–14 35–200 5480
C 200/1 P, stainless steel 2.5–50 35–725 3122
C 200/1 P, stainless steel 10–200 150–3,000 3123
C 200/1 XP, brass 0.2–3 3–45 5564
C 200/1 XP, brass 0.5–6 8–85 5565
C 200/1 XP, brass 2.5–14 35–200 5566
C 200/1 XP, brass 2.5–50 35–725 5567
C 200/1 XP, brass 10–200 150–3,000 5568
C 200/1 XP, stainless steel 0.2–3 3–45 5569
C 200/1 XP, stainless steel 0.5–6 8–85 5570
C 200/1 XP, stainless steel 2.5–14 35–200 5571
C 200/1 XP, stainless steel 2.5–50 35–725 5572
C 200/1 XP, stainless steel 10–200 150–3,000 5573
Flow characteristics
4
3
2
1
0 1 2 3 4 5 6 7 Flow, Nm3/h N2
Outlet pressure, bar
C 200/1 3
Max flow
7 bar*
5 bar*
3 bar*
* Inlet pressure
29 bar*
4
6
2
8
0
Max flow
10
12
14
16
6 12 18 24 30
11 bar*
21 bar*
Flow, Nm3/h N2
Outlet pressure, bar
C 200/1 14
* Inlet pressure
120
100
80
60
40
20
10 20 30 40 50 60 700
230 bar*
161 bar*
81 bar*
Flow, Nm3/h N2
Outlet pressure, bar
C 200/1 200
* Inlet pressure
Max flow
240 120–140
