Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
RED RHINO 7000 SERIES MINI CRUSHER
TECHNICAL SPECS Crusher: Single toggle jaw crusher, 14% manganese steel
reversible Jaws.
Engine: Deutz 74hp air cooled diesel.
Fuel Consumption: Approximately 10 litres per hour (at 50kw/2300rpm).
Chassis: Hydraulic steel tracks.
Jaw Aperture: 700mm x 400mm
Output: 45t per hour has been achieved.
Fuel Capacity: 90 litres.
Output Size: Instant hydraulic adjustment, choice of 20mm–140mm.
Control System: Dual remote control and umbilical cord for all functions.
Unique: Hydraulic reversible jaw action, reversible jaw plates
(2 “lives”).
It can crush a full UK kerbstone in under 10 seconds.
Options: Conveyor mounted screener attachment
Overband magnet.
Hydraulic breaker circuit
DIMENSIONS
Length: 6700mm
Width: 2200mm
Total Height: 2720mm
Loading Height: 2720mm
Weight: 10,000kgs (subject to specification)
RED RHINO 7000 SERIES MINI CRUSHER
Red Rhino Crushers (UK) Ltd, Alma Park Road, Alma Park Industrial Estate, Grantham, Lincs. NG31 9SE
Tel: 01476 590 790 Fax: 01476 593 821 Email: [email protected]
Description: Single toggle jaw crusher with a jaw aperture of 700mm x 400mm – this crusher will crush a
full UK kerbstone in approximately 10 seconds. The 7000 series is 2200mm wide and a has a loading height of
2720mm. This machine will provide significant daily tonnage where a larger machines is too bulky or noisy.
The 7000 series will produce an output size ranging from 20mm up to 140mm.
Material: The 7000 series will crush concrete, kerbstone, marble, paving slabs, bricks, tiles, blocks, stone, porcelain, flint,
gravestones, glass, etc.
Output: Output will vary according to jaw setting, loading method, loading equipment, input material and familiarity of
the loading operator. In excess of 45t per hour has been achieved.
Jaws: The hydraulic adjustment/reverse lever allowing for the quick release of jammed material and adjustment
Of output product size.
Further safety features are fitted as standard. Jaw plates are made of 14% manganese steel which will „work-
harden. The jaws are reversible meaning that they have „2 lives‟.
Reinforced Concrete & Steel: For reinforced concrete it is recommended that you protect your conveyor belt and crush this material having
removed the conveyor belt.
Engine: The engine is a Deutz 74hp air cooled diesel set at 2,300rpm.
The fuel tank capacity is 90 litres, with a fuel consumption of approximately 10 litres per hour.
Tracks & Controls: Tracks are steel and controlled by a remote control for safe loading, unloading and tracking. Controls are
simple and clearly labelled. A hydraulic oil cooler is fitted to ensure longer life of all hydraulic equipment
Conveyor & Dust Suppression: Dust suppression is fitted as standard and is by means of fine water spray nozzles, utilising standard domestic
hose pressure. The output conveyor is simple in design with a moulded belt providing strength and durability.
Loading: Maximum productivity is achieved by correct loading of the crusher.
Optimum tonnage per hour is achieved by positioning the excavator directly in-line with the rear of the machine,
and that the excavator operator has a clear line of sight with the jaw.
Screener: An optional conveyor mounted screener is available for the separation of dust and topsoil from the crushing
process. Supplied with a 10mm mesh, the screener can also assist with the creation of decorative aggregates.
Safety & Maintenance: There are two emergency stop buttons located to either side of the machine, and the front inspection covers are
fitted with a cut-off switch. The engine cover is lockable and a central greasing point is fitted. Service intervals
are every 250 hours.
WATCH THE VIDEOS ON WWW.REDRHINOCRUSHERS.COM
Hydraulic jaw adjustment
(Choice of output size
20mm-140mm) 700mm x 400mm jaw aperture
Hydraulic reversible jaw
action
Powerful 74hp Deutz air
cooled diesel engine
Electric start with clear and
simple hydraulic controls.
Dust suppression fitted
as standard.
Up to 45t/hour output.
Additional options for
Screeners, hydraulic
breakers, magnets Single toggle jaw crusher with
14% manganese steel
‘reversible’ jaw plates.
Full radio controlled system