1

PRODUCTS 2017

RED DOT SIGHTSFOR HUNTING &

SPORT Shooting

When the time comes to take the shot, there should be no question that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness.

demands on your equipment, so we design and test Aimpoint products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are.

The Aimpoint Philosophy

2

Why an Aimpoint ® Red Dot Sight?

To be successful, shooters must be able to aim accurately and quickly under a wide variety of conditions. On a shooting range, there is plenty of time to take aim, but in the real world, everything is in fast motion. Add rough terrain, foul weather, poor light and high levels of stress and even the most

Tests have repeatedly proven that the single red dot reticule is the fastest on target in timed and

the greatest increase in hit probability with moving targets. Other aiming devices require that the shooter’s focus leaves the target or create limited situational awareness. Aimpoint red dot sights give

remain on target and shoot with both eyes open, so you are fully aware at all times.

3

Many great hunting opportunities happen suddenly, and you have to be ready when game appears. An Aimpoint® sight gives you a tremendous advantage, aiming with both eyes open allows you to see the animal as well as the surroundings. You instinctively place the red dot on the game, and are ready to pull the trigger.

when you really need to be.

Get the WHO

4

LE picture

5

”From deer to coyotes and wildebeests to warthogs, I hunt awide variety of species around the world. With an Aimpoint

I’m at 50 yards in South Africa or 250 yards in South Dakota.”

Mike SchobyEditor, Petersen’s Hunting

Host, Petersen’s Hunting Adventures

6

All conditions – Anywhere

Aimpoint® sights work in all light conditions, from the darkness of the forest before dawn, to bright mountain sunlight. They are comple-tely waterproof so you never have to worry about rain or immersion. Aimpoint sights are developed and tested to be used in any weather conditions, from the sub-zero tempe-ratures of the Arctic to the heat and humidity of the tropics.

Aimpoint has a sight for you.

User friendlinessAimpoint sights are extremely user friendly. Operated by a mechanical switch or push-buttons, an Aimpoint sight can be easily and quickly changed to the right setting while simultane-ously aiming through your sight. Our mechanical switch and push buttons won’t freeze and are easy to ope-rate whether you are wearing gloves or not.

Environmental awarenessAt Aimpoint, we take great pride in making sure that neither hazardous nor radioactive materials are used in our sights.

Standard features on

all Aimpoint® sights

7

The Micro H-2 is a result of feedback coming from hard core customers desiring an even more hard core Micro sight. With a redesigned and reinforced house

all types of environmental conditions. And thanks to new optical lenses and cut-ting edge lens coatings, the optical performance and the shape and clarity of the red dot are radically improved.

MICRO SERIES SIGHTS

aimpoint micro H-2

A

AIMPOINT MICRO H-1

The Micro sights series can be mounted onto scope with an adapter to hunt at

both long and short distances.

Plenty of mounts for the Micro sights are available on the market.

Aimpoint Micro sights are available as a kit with Blaser original saddle mount.

Complete information about this product Micro H-1 Art.No. 200090

Since its introduction in 2007, the Micro H-1 has become a very popular hunting sight worldwide due to its size, light weight and robust build quality.

8

aimpoint micro H-2

A

AIMPOINT MICRO H-1

A

The Micro sights series can be mounted onto scope with an adapter to hunt at

both long and short distances.

Plenty of mounts for the Micro sights are available on the market.

Aimpoint Micro sights are available as a kit with Blaser original saddle mount.

Micro H-1 Art.No. 200090

Since its introduction in 2007, the Micro H-1 has become a very popular hunting sight worldwide due to its size, light weight and robust build quality.

MICRO SERIES SIGHTS

The Micro H-2 is a result of feedback coming from hard core customers desiring an even more hard core Micro sight. With a redesigned and reinforced house

all types of environmental conditions. And thanks to new optical lenses and cut-ting edge lens coatings, the optical performance and the shape and clarity of the red dot are radically improved.

9

10

MICRO SERIES SIGHTSThe new Aimpoint® -

to the shotgun at any point along the ventilated rib, and interchangeable adapter plates are included to accommodate most popular shotgun rib sizes.

AIMPOINT MICRO s-1

A

11

The Micro S-1 greatly enhances hit percentage for waterfowl and upland bird hun-

optic for turkey and deer shotgun hunters. The big, bright 6 MOA red dot provides an optimal combination of target acquisition speed and visibility. This sight is rated

design advances Aimpoint has learned over 20 years of service with the U.S. military,

Give yourself the advantage of the ultimate shotgun optic – the Aimpoint Micro S-1.

HUNTER SERIES SIGHTSmaking fast shots to hit moose, wild boar and red stag moving through

thick forests in rain and snow, made the illuminated red dot sight a necessity. Using the Hunter Series of sights, you’ll be able to make

the tough shots and forget about being challenged by bad light or

12

This sight has a 34 mm tube diameter for an exceptional optical performance.

or magnum actions, a plus to any hunter who desires the classic lines of a full length sight.

choice of mounting rings. Due to its length, we recommend this sight primarily for

classic lines of a full length sight.

AIMPOINT HUNTER H30L

AIMPOINT HUNTER H34L

B

B

13

HUNTER SERIES SIGHTS-

culty in making fast shots to hit moose, wild boar and red stag moving through thick forests in rain and snow, made the illuminated red dot sight a necessity. Using the Hunter Series of sights, you’ll be able to make the tough shots and forget about being challenged by bad light

14

AIMPOINT HUNTER H30S

B

B

This sight has a 34 mm tube diameter for an exceptional optical performance. Due to its length, we recommend this sight for use on standard or short action

handguns.

a wide choice of mounting rings. Due to its length, we recommend this sight

hunter who desires the classic lines of a full length sight.

AIMPOINT HUNTER H34S

15

9000L™

C

This is the most popular sight within the 9000 series due to its long length. It makes it ideal

a long or short version.

9000 SERIES SIGHTS

9000SC™

Accessories & mounts info on page 22-23.More tech details on page 27.

C

16

17

9000SC-NV™

C

Accessories & mounts info on page 22-23.More tech details on page 27.

9000 SERIES SIGHTS

This is the same sight as the 9000SC, but it is compatible with night vision devices (NVD.) With more and more states and countries allowing hunting of predators and

the dot is not visible with a naked eye. Through the night vision equipment, the red dot becomes white and can be used as usual.

18

19

20

3x-cThe Aimpoint® 3X-C can be used in conjunction with all Aimpoint® sights for long-

as the aiming reticle, eliminating the need for re-zeroing when shifting between

See page 23 for more details aboutthe FlipMount and the TwistMount.

In order to mount the 3X-C you need: FlipMount and TwistMount base NOTE!

3x-c

21

22

Accessories

ARD KillFlash® Filter For CompM4, PRO, ACO, CompC3 & 9000.

Art.No. 12239

Flip-Up Rear CoverFor CompC3 & 9000

Art.No. 12224

Flip-up Front CoverFor CompC3 & 9000

Art.No. 12223

Flip-up Front CoverTransparent

For CompC3 & 9000

Art.No. 12241

Flip-up Rear CoverTransparent

For CompC3 & 9000

Art.No. 12240

Polarization Filter For CompC3 & 9000

Art.No. 12216

Rubber Bikini Lens Cover For Micro sights

Art. No. 12204

Lens Cover BikiniFor 9000 & CompC3, Art.No. 10628

For H30L & H30S, Art.No. 12663

For H34L & H34S, Art.No. 12664

CR 2032Lithium BatteryFor Micro & Hunter

Art.No. 12211

Micro ToolArt.No. 12207

DL1/3N Lithium BatteryFor 9000 and CompC3

Art.No. 10903

23

* Screws and Allen key included** Screws and Micro Tool included*** Screws, Micro Tool and Thread Sealer included

LQR 34 mm RingsBlack, one pair. For H34S and H34LFits on Leupold Quick Release bases.

Art.No. 12910*

WH 34 mm RingsBlack, one pair. For H34S and H34LFits on Weaver bases and Picatinny rail.

Art.No. 200087*

Mount Adapter 30 mmFor magnifying scopes with 30 mm tube.

Art.No. 200152*

Mount Adapter 34 mmFor magnifying scopes with 34 mm tube.

Art.No. 200153*

Mounting solutions

Rings 30 mm Black, one pair. For 9000 sights.

Art.No. 12229*

Micro Drilling MountFits most of the Merkel Drillings.

Art.No. 12200**

Micro Mount kit

MK III.

Art.No. 12464**

Micro Mount Kit For Ruger 10/22.

Art.No. 12466**

Micro 11 mm Dovetail MountFits most of the 11 mm Dovetail Bases ranging from 10-12.5 mm.

Art.No. 12215**

Micro LRP Mount KitTo convert Micro Mount to Lever Release Picatinny.

Art.No. 12184

Micro Mount For Glock pistols.

Art.No. 12437**

Micro Safari MountFits most of the Merkel

Art.No. 12201**

Micro H-1 2MOA With Blaser Mountoriginal factory installed. Fits Blaser guns with saddle mount interface. The Blaser mount is not sold separately.

Art.No. 200090

Micro Spacer HighFor Micro sights. Raises height of optical axis to 39 mm for cowitness with AR-15.

Art.No. 12358***

Micro Spacer LowFor Micro sights. Raises height of optical axis to 30 mm.

Art.No. 12357***

Micro LRP MountLever Release Picatinny for Micro sights. Return to zero after dismount-ing. Thread sealerincluded.

Art.No. 12905 ***

TwistMount Ring Separate ring for TwistMountArt. No. 12238 *

TwistMount Complete Quick Release Mount for 3XMag and CEUFits on Picatinny rail (MIL-STD 1913)Art. No. 12234 *

TwistMount Base Separate base for Twist-Mount Fits on Picatinny rail (MIL-STD 1913)Art. No. 12236

FlipMount including TwistMount baseA quick attach/detach mount that can be quickly

optical axis. For Aimpoint

equipment with a 30 mm tube. Micro tool included.

Art No. 200250(30 mm height of optical axis)

Art No. 200251 (39 mm height of optical axis)

24

The Aimpoint® sight combines battle proven lineage and

package price. It simply doesn’t get any better.”

Ben BattlesEditor, On Target

25

26

TECHNICAL SPECS

Aimpoint Hunter Series

Aimpoint 9000 Series Aimpoint CompC3

27

Warranty InformationAimpoint values your business and always attempts to provide you the very best of products and services. That’s why we back our products with one of the best guarantees in the industry. Our products are guaranteed to be free from original manufacturer defects in material and/or workmanship under normal use from the date of purchase for ten (10) years for personal use and two (2) years for professional or competition use.

Customer Service & Dealership EligibilityFor dealership eligibility and information about customer service, please scan the code or follow the link.

www.aimpoint.com/customerservice www.aimpoint.com/dealership

28

1 Optics must be mounted using two heavy duty steel mounting rings and a solid one piece mounting base

** A at room temperature & at setting 8 out of 12 ** B at room temperature & at start-up setting 7 ** C at room temperature & at setting 7 out of 10

General TECHNICAL DATA

FEATURES FOR ALL AIMPOINT RED DOT SIGHTS

When the time comes to take the shot, there should be no ques-tion that you can count on your sight to perform. We believe that a weapon sight should simplify aiming while meeting the highest possible requirements for reliability and ruggedness.

your equipment, so we design and test Aimpoint products to stand up to any condition you are likely to encounter. We also design our products to operate constantly for years on a single battery so your sight will be ready when you are.

The Aimpoint Philosophy

29

30

Aimpoint, Inc.7309 Gateway Court

Manassas, Virginia 20109Phone 703.263.9795

Fax 703.263.9463E-mail: info@aimpoint.com

www.aimpoint.com

Printing House: Exaktaprinting, Malmö, SWEDENThis printed material is for information purposes only and does not constitute any binding obligation or agreement by Aimpoint AB

All rights reserved. © 2017 Aimpoint AB. Art. No. M02476