REAL ESTATE & EQUIPMENT AUCTION - MaasCompanies · 2018-05-18 · 32 – CLARK FORK LIFT TRUCK, LPG ENGINE GCX25, Type LP GX230-0296-9085K0F (Mfg. 1992) 4,150 lb. capacity, 3- Stage

AUCTIONAUCTIONw w w . m a a s c o m p a n i e s . c o m

THURSDAY, MAY 24 at 10:00 AM

REAL ESTATE & EQUIPMENT

Complete Liquidation of Cherrington Enterprises- Clarissa, MN Facility39,407± Sq. Ft. Manufacturing & Warehouse Building on 4.38± Acres

Real Estate Plus Over 300 Equipment Lots!

Clarissa, Minnesota 56440 USA

AUCTION DIVISION

507.285.1444Rochester, Minnesota

BUY PRIOR TO AUCTION!!

TURN KEY READY WITH STAFF AVAILABLE

FOR REHIRE!!

EQUIPMENT CATALOG

Former Cherrington Enterprises Clarissa, Minnesota USA

LOT # QUANTITY MANUFACTURER MODEL SERIAL NUMBER DESCRIPTION

1 of 32 -ACCURACY OF DESCRIPTION NOT GUARANTEED-

-ALL ITEMS SOLD AS-IS WHERE-IS WITH NO WARRANTIES OR GUARANTEES, EXPRESSED OR IMPLIED- FOR COMPLETE EQUIPMENT PHOTOGRAPHS VISIT OUR WEBSITE:

WWW.MAASCOMPANIES.COM “THE LEADER IN CLIENT SATISFACTION”

10 – 2008 FORD PICKUP, 4- WHEEL DRIVE, 1 TON, SINGLE WHEEL F 350 Super Duty, Crew Cab, XLT Trim Package vin 1FTWW31R58EB79500 (06/2007) 156 in. Wheel Base, Automatic Power Stroke V8 Turbo Diesel, RHINO Liner, 6- disc CD Player, Cloth Interior, Power Seats, Gooseneck Hitch, REESE Ball Hitch, LT275/ 70R18 Tires, ND Tags 618 BTU, Exp. 12/2018, 105,029.8 Indicated Mileage.

11 – 2002 FORD PICKUP, 4- WHEEL DRIVE, 1 TON, DUAL REAR WHEELS F350 Super Duty, Extended Cab vin 1FTWX33FX2EC52058 (03/2002) 158 in. Wheel Base, Automatic Power Stroke V8 Turbo Diesel, CD Player, ALCOA Aluminum Wheels, Ball Hitch, LT 235/85R16 Tires, MN Tags YAW5885 Exp. 02/2019, 183,376 Indicated Mileage, (NOTE: Needs New Oil Pan, Area of Rust at Both Ends of the Rear Bumper.)

12 – 2004 FORD 1 TON FLAT BED, DUAL REAR WHEELS F 350 Super Duty, Extended Cab, XLT Trim Package vin 1FDWX37P84ED02022 (04/2004) 162 in. Wheel Base, 5-Speed Manual Power Stroke V8 Turbo Diesel, CD Player, Electronic Brake Controller, Chrome Step Bars, having an 8 ft. wide x 9 ft. 4 in. long Steel Flat Bed Deck, with Headache Rack and Gooseneck Ball Hitch, REESE Ball Hitch, LT 235/85R16 Tires, MN Tags YAW 5886, Exp. 02/2019, 168,295 Indicated Mileage.

13 – TITAN TRAILER MFG. TRAILER, FLAT BED, TANDEM AXLE, GOOSENECK 3F9966 vin 4TGF2920981051090 (Mfg. 05/2008) 14,000 lbs. GVWR, 102 in. wide x 24 ft. long Loading Deck, having 64 in. long Beaver Tail Loading Ramp, with 3- 55 in. long x 16 in. high (approx.) Folding Loading Ramps, Dual Front Crank-Down Landing Gear, ST 235/85R16 Tires ND Tags T177195 Exp. 12/2018.

14 – ABU TRAILERS INC. TRAILER, FLAT BED, TANDEM AXLE. BUMPER HITCH vin 4UGFH29282D009483 (Mfg. 05/2002) 14,000 lbs. GVWR, 101 in. wide x 23 ft. 4 in. long Loading Deck, having 64 in. long Beaver Tail Loading Ramp, with 3- 55 in. long x 16 in. high (approx.) Folding Loading Ramps, Dual Front Main Crank-Down Landing Gear, ST 235/85R16 Tires, MN Tags CBT0145, Exp. 2019.

15 – STEALTH TRAILERS SINGLE AXLE VAN TRAILER SLT612SA vin 52LBE1217AE002896 (Mfg. 05/2010) 2,990 lbs. GVWR, Having Curb Side Forward Positioned Man Hinged Door, Full Bottom Hinged Spring Counter Weighted Fully Opening Rear Door, Single Axle; 1,340 lbs. Empty Weight, 2,990 GVWR, 6ft. Wide x 12 ft. long x 6' tall; SD Tag T177194.

16 – JOHN DEERE 4600 TRACTOR, 4- WHEEL DRIVE, DIESEL vin LV4600H266072 (Mfg. 1999) Powered by 43 HP YANMAR 2.0 L, 4- Cylinder Diesel Engine, Roll-Over Protection Bar/Cage, 17.5L-24 Rear and 10-16.5 Front Tires, having a Model 460 Front Loader Attachment with 73 in. wide General Purpose Bucket, Pintle Hitch Attachment installed on 3- Point Hydraulic Lift; 1,226.7 Indicated Meter Hours.






17 – NEW HOLLAND LS 180 DIESEL SKID STEER LOADER s/n 191518 (Mfg. 5/29/2002) 67 HP, 2- Speed Super Boom, (CARLSON TRACTOR & EQUIPMENT CO. Unit No. 11890); 12- 16.5 NHS Tires, 1,179 hours.

18 – VIRNIG MANUFACTURING INC. GENERAL PURPOSE BUCKET 84 in. wide General Purpose Bucket (CARLSON TRACTOR & EQUIPMENT CO., Unit No. 12161).

19 – CARLSON TRACTOR & EQUIPMENT CO. FORKLIFT ATTACHMENT 123?5 (CARLSON Unit No.) Having 2- 48 in. long Forks for NEW HOLLAND Skid Steer Loader.

20 – PINTLE HITCH ATTACHMENT For NEW HOLLAND Skid Steer Loader.

21 – HYDRAULIC POWER SUPPLY AND TOW BAR ATTACHMENT For NEW HOLLAND Skid Steer Loader, 540 rpm, with Pintle Hitch. (NOTE: Used to Test the GLENMAC-HARLEY Units.)

22 – DRAW BAR ATTACHMENT To fit Forklift Forks.

23 – GLENMAC, INC-HARLEY POWER BOX BLADE / LANDSCAPE POWER RAKE Flex-10 F104B001 (Mfg. 2004) VG Condition. (NOTE: Was used as the/a Demonstration Unit.) With 3- Point Tractor Hitch.

24 – GLENMAC, INC-HARLEY POWER BOX BLADE / LANDSCAPE POWER RAKE Flex-10 F104B002 (Mfg. 2004) VG Condition. (NOTE: Was used as the/a Demonstration Unit.) With 3- Point Tractor Hitch and Operators Manual Male End with U-Joint and Safety Guard with PTO Shaft, 540 rpm, 2 ft. long (approx.).

LOTS 25-29 UNASSIGNED

FORK LIFT TRUCKS 30 – KALMAR FORK LIFT TRUCK, LPG ENGINE

P80PS 111008A (Mfg. 1985 approx.) 8,000 lbs. capacity, Type A2 / Forks having 3- Stage Mast, Hydraulic Side Shift 48 in. long Forks, Foam-Filled Tires, Operators ROPS Canopy, 4,639 Indicated Meter Hours.

31 – KOMATSU FORK LIFT TRUCK, LPG ENGINE FG25T-12 s/n 556123A (Mfg. Aug. 2001) 3,750 lbs. capacity; 3- Stage Mast, Model GC55F-SSS-A052, 188 in. Lift height, Hydraulic Side Shift Forks, Operators ROPS Canopy having Glass Front and Rear Panels, 2- Hinged Side Doors to provide Cold Weather Enclosed Cab, 7,095 Indicated Meter Hours. (NOTE: Lower Left Front fluid leak.)

32 – CLARK FORK LIFT TRUCK, LPG ENGINE GCX25, Type LP GX230-0296-9085K0F (Mfg. 1992) 4,150 lb. capacity, 3- Stage Mast having Hydraulic Side Shift, Solid Tires, Operators ROPS Canopy, 1,012.8 Indicated Meter Hours.






33 – YALE FORK LIFT TRUCK, ELECTRIC ERP030TFN36SE082 s/n B807N01706U (Mfg. 1997) 3,000 lb. capacity, Hydraulic Side-Shift Forks, 183 in. Lift height, 3- Stage Mast, Operators ROPS Canopy, 10,339.7 Indicated Meter Hours; With EXIDE BATTERY CHARGER, SELF START/STOP, AUTOMATIC BATTERY

SELECTION Load Hog™ LH1-18-850 208/240/480 VAC, 40/36/18 amps, 60 hz., 1 PH., 6 HR Rate, 19=8 Max Cells, 850 Max Amp/Hr; Co. No. 49, No. 850430.

34 – LOT 2- pair FORK EXTENSIONS For Forklift Truck, 1- Pair is 10 ft. long, 1- Pair is 5 ft. 6 in. long.

END OF FORK LIFT TRUCKS 35 – KUBOTA F-2560 LAWN MOWER, RIDING

s/n 20296 (Mfg. 1999) Powered by KUBOTA 25 hp Diesel Engine, having 5 ft. wide (approx.) Front Mounted Mower Attachment, Operators ROP Bar, 389.9 Indicated Meter Hours. (NOTE: Used to test Mower Attachments.)

36 – TENNANT FLOOR SWEEPER 1186 1186-20003 1,696 Indicated Meter Hours.

ELECTRIC MIG/TIG WELDERS 37 – MILLER WELDER

Axcess™ 450 s/n LE050211, Stock No. 907152-01-1 With MILLER Axcess-S 40 V Wire Feeder, s/n LE037020, Stock No. 195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.

38 – MILLER WELDER Axcess™ 450 s/n LE054219, Stock No. 907152-01-1 With MILLER Axcess-S 40 V Wire Feeder, s/n LE051274, Stock No. 195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.

39 – MILLER WELDER Axcess™ 450 s/n LE020394, Stock No. 907152-01-1 With MILLER Axcess-S 40 V Wire Feeder, s/n LE051256, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.

40 – MILLER WELDER Axcess™ 450 s/n LE060098, Stock No. 907152-01-1 With MILLER Axcess 40 V Wire Feeder, s/n LE037002, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.

41 – MILLER WELDER Axcess™ 450 s/n LE054197, Stock No. 907152-01-1 With MILLER Axcess 40 V Wire Feeder, s/n LE051266, Stock No.195182, with Wire Supply Reel, Weld Gun and Weld ad Power Leads, Mounted on 4- Wheel Base.






42 – UNASSIGNED

43 – MILLER WELDING POWER SOURCE DeltaWeld 302, CV-DC s/n LC237691 Stock No. 903376, With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LC236495, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)

44 – MILLER WELDING POWER SOURCE DeltaWeld 302, CV-DC s/n LC381304, Stock No. 903376 With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LC221233, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)

45 – MILLER WELDING POWER SOURCE DeltaWeld 302, CV-DC s/n LE233846, Stock No. 903376 With MILLER 70 Series 24 V Wire Feeder Wire Supply Reel, s/n LE275716, Stock No. 195057, Mounted on 4- Wheel Cart having End Platform for Gas Bottles, Welding and Power Supply Leads. (NOTE: Gas Bottles are not attached to nor being sold with this Welder.)

46 – LOT HYPERTHERM® PLASMA CUTTING SYSTEM MAX100 s/n 70-007338, No. 059001 150 volt, 100 amp, 3- Phase, 600 Hz; With Cutting and Power Leads and Gun, mounted on a 4- Wheel Cart.

47 – LOT 4 (approx.)- CCI POWER SUPPLY CORD / WELDING CABLES Seoprene 105 Consisting of but not necessarily limited to: 2- Coils Welding Grounding Cables 15 ft. long (est.), Welding Grounding Cables 10 ft. long (est.), Heavy Duty, 10 AWG, 4/C, 600 V, having End Fitting on Both Ends, 15 ft. Length, (est.).

48 – LOT 6- BOXES and 1- coil LINCOLN ELECTRIC WELDING WIRE Consisting of but not necessarily limited to: 3- Boxes SUPER ARC® .045 in. (1.1 MM) l-56®, ED011659, 60 lb. Coil; 2- Boxes SUPER ARC® .035 in. (0.9 mm), L-56®, ED021274, 44 lb. Coil; 1- Box NATIONAL STANDARD .045 in. Type NS-115CU, 45 lbs.; 1- Box STOODY® 965-G, .045 in. (NOTE: 1- of these Boxes has been Opened-may be Partial Coil); 1- Box and 1- Coil are Unidentified; (NOTE: The Box has been opened-may be Partial Coil).

49 – DONALDSON TORIT CARTRIDGE FUME COLLECTOR EASY TRUNK™ s/n 2294580-002 1.5 hp Electric Motor, Portable, with Power Cord.

50 – DONALDSON TORIT CARTRIDGE FUME COLLECTOR EASY TRUNK™ s/n 2330626-002 1.5 hp Electric Motor, Portable, with Power Cord.

51 – AIR FLOW SYSTEMS CARTRIDGE FUME COLLECTOR Dust-Pak Portable.






52 – LOT 5 (approx.)- TORIT FUME COLLECTORS / SMOKE EATERS Each with Filters Installed, 4- (approx.) Filters (apparently New and Used in Boxes), 1- Wood Crate of Hoses and Fittings. (NOTE: 1- is installed, suspended from the Ceiling in the Welding Cell Area; 4- are uninstalled, stored in the Northeast Corner Room with Related Items.)

53 – LOT INERT WELDING GAS MIXING CONTROL PANEL Consisting of but not necessarily limited to: 1- THERMCO Gas Mixer, Model 8500CA50X1100, s/n 24215 (Mfg. 02/2004); Argon and Carbon Dioxide Supply Gases. With WESTERN INNOVATOR Portable Bulk Gas Manifold, Model LCHP-3-2, s/n 27768, (Mfg. 02/2004); WESTERN INNOVATOR Model 8570D Electrical Junction Box; 1- HARRIS Model 330-350 psig Pressure Regulator.

54 – CUSTOM DESIGNED AND FABRICATED WELDING TABLE, STEEL, HEAVY DUTY 39 in. high x 40 in. wide x 46 in. long (approx.).

55 – LOT 3- BOXES CUSTOM DESIGNED AND FABRICATED C-CLAMPS, WELDING Consisting of but not necessarily limited to: 1- Box, 6- VISE GRIP® 11R Welding Clamps; 1- Box 3- C- Clamps: 1- 6 in., 1- 7 in. 1- 9 in. (est.) and 1- Slide Adjustable Clamp; 1- Box, 3- VG 6R Welding Clamps: 1- VG 11R; 1- VG 11-R Deep Throat Welding Clamps.

56 – LOT 5 (approx.)- CUSTOM DESIGNED AND FABRICATED WELDING SHIELD SCREEN 6 ft. high x 50 ft. + (est.) linear feet.

57 – CUSTOM DESIGNED AND FABRICATED WELDING TABLE, STEEL, HEAVY DUTY 39 in. high x 40 in. wide x 46 in long (approx.).

58 – LOT 5- BOXES WELDING CLAMPS AND TOOLS With 11 (approx.)- VISE GRIP® C-CLAMPS, WELDING 6R and 6SP; With 15 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 4 (approx.)- STRONG HAND AND STABIL AND WILTON C-CLAMPS,

WELDING UG125 and 606; With STRONG HAND C-CLAMP, WELDING 2400 S-4; With 10+ (approx.)- HAND TOOLS

Consisting of but not necessarily limited to: JOHNSON Aluminum Carpenter's Square; 2- Ball Peen Hammers; 1- Plastic Mallet and Related.

59 – LOT 2- AIWA AM/FM RADIOS WITH CASSETTE DECK PLAYERS 1- is similar to Model NSX 3500 and 1- is Undetermined. (NOTE: 1 is missing power cord.)






60 – CUSTOM DESIGNED AND FABRICATED WELDING WORK TABLE Consisting of but not necessarily limited to: 1- Welding and Work Table, Heavy Duty, 40 in. high x 36 in. deep x 48 in. long having Lower Shelf and 1/2 in. Plate Steel Top. WILTON V230 (est.) Vise.

61 – LOT 7- BOXES WELDING CLAMPS AND TOOLS With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 3 (approx.)- VISE GRIP® C-CLAMPS, WELDING 18 R, 18 SP, & Modified 11R; With 6 (approx.)- VISE GRIP® AND STRONG HAND C-CLAMPS, WELDING

Consisting of but not necessarily limited to: 1- STRONG HAND UG125; 1- STABIL; 2- STRONG HAND 12090-S8; and 2- WILTON C- Clamps;

With 4 (approx.)- VISE GRIP® AND CRESCENT C-CLAMPS, WELDING Consisting of but not necessarily limited to: 3- Vise GRIP® Modified 11 R and 1- CRESCENT® 11C Welding C- Clamps;

With 19 (approx.)- VISE GRIP® C-CLAMPS, WELDING 6R; With 11 (approx.)- HAND TOOLS

Consisting of but not necessarily limited to: 24 in. Adjustable Jaw Wrench having Splinted Repaired Handle, 4- 2 lb. (est.) Shop Mallets (1- is Plastic), 1- Crow Bar, 1- Drift Pin, and Related Hand Tools.

62 – LOT WESTWARD MACHINEST CABINET, STEEL WORK TABLE AND RELATED HAND TOOLS AND SUPPLIES Consisting of but not necessarily limited to: 1- WESTWARD 5 Drawer Tool Cabinet, mounted on Castering Wheels; 1- Tool Box, Hand Tools consisting of 2- Squares 2- Tri-Squares, Air Grinder, Wrenches, Mallets and related; 1- Material Table, Steel, 25 in. x 34 in.; and 1- Material Table 19 in. x 37 in.

63 – LOT WELDING CURTAIN Steel Frame, 6 ft. high x 28 ft. total (approx. ) Linear Feet, having 4 ft. long (est.) Folding Wings on Each End.

64 – CUSTOM DESIGNED AND FABRICATED WELDING TABLE, HEAVY DUTY 38 in. high x 40 in. wide x 60 in. long (approx.) having 1/2 in. tall Top Plate.

65 – LOT 3- BOXES WELDING CLAMPS With 3 (approx.)- VISE GRIP® AND STRONG HAND C-CLAMPS, WELDING

11R Consisting of but not necessarily limited to: 2- Vise GRIP® 18R; 1- STRONG HAND UG125;

With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R.






66 – LOT WESTWARD MECHANIC TOOL CHEST AND RELATED TOOLS Consisting of but not necessarily limited to: WESTWARD 5- Drawer Portable Tool Chest with Hand Tools: Ball Peen Hammer; 2- VISE GRIP® Pliers; Air Powered Hand Grinder; FOWLER Micrometer; Z36 Abrasive Disk, 1- Wood Work Table, 1- Metal Stool and 1- Portable Metal Work Cart/Stool.

67 – LOT 3- 1 gal. bottles SWAGELOCK®, SHERLOCK AND SNOOP® LIQUID LEAK DETECTOR.

68 – LOT ELECTRIC FLOOD LIGHTS AND POWER EXTENSION CORDS Consisting of but not necessarily limited to: 3- Incandescent Lights with Reflectors; 3- (est.) Electrical Power Extension Cords and 1- Power Strip.

69 – LOT ELECTRIC FANS With FLOW-PRO FAN 20 in. (approx.) Pedestal Mounted; With OCEAN FAN 18 in. (approx.) Floor/Table Mount; With 2- LAKEWOOD FANS 18 in. (approx.); With NS INDUSTRIAL FANS 20 in. (approx.); With PATTON FAN 20 in. (approx.); With 2- FANS 18 in. (approx.).

70 – LOT WELDING CURTAIN Having Steel Frame, 6 ft. high x 60 ft. (approx.) total linear feet.

71 – CUSTOM DESIGNED AND FABRICATED WELDING TABLE, STEEL, HEAVY DUTY 37 in. high x 59 in. wide x 60 in. long (approx.) having 3/4 in. tall Plate Top, 4- Legs.

72 – LOT 5- BOXES WELDING CLAMPS With 28 (approx.)- VISE GRIP® AND JONNESWAY® C-CLAMPS, WELDING

VISE GRIP Model 6R Welding C-Clamps; Jonnesway CR-MO Welding C-Clamps.

With 10 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 4 (approx.)- VISE GRIP® C-CLAMPS, WELDING

11R Each has Modified End Jig Tip; With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R; With 8 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R.






73 – LOT 5- BOXES WELDING CLAMPS AND C-CLAMPS With 5 (approx.)- VISE GRIP® C-CLAMPS, WELDING 11R and 11SP; With 4 (approx.)- VISE GRIP® C-CLAMPS, WELDING 18R; With 4 (approx.)- STRONG HAND C-CLAMPS, WELDING UG125; With 4 (approx.)- STRONG HAND C-CLAMPS, WELDING UG125; With 2 (approx.)- WILLIAMS C-CLAMPS, WELDING GC-408.

74 – LOT 3 (approx.)- BALLOW WORK TABLES AND WORK STAND 1- Work Table, 6 ft. long; 1- Work Table 42 in. long; 1- 2- Step Work Stand, with 1- AM/FM Radio Cassette Player.

75 – LOT WELDING HAND TOOLS AND WORK TABLE 5- boxes plus items, Consisting of but not necessarily limited to: 2- Fiber-Metal Full Cover Face Shields; Socket and Ratchet Wrench Set; 2- Hammer Punch Set; 2- Plastic Mallets; 2- Hammers - 1- is Claw, 1- is Ball; Welding Aprons, Gloves, Level, Measuring Stick and Related.

76 – LOT MATERIAL HANDLING TOOLS Consisting of but not necessarily limited to: 1- TIGRIP Model SK-TBL 1.0, (Mfg. 1997), capacity - 0-20, Plate Grip; 2- Chain 4- Way; 4- (est.) Fabric Lift Straps; 6- (approx.) S-Hooks.

77 – LOT AIR HOSES AND AIR GUNS Consisting of but not necessarily limited to: 10- (est.) Hoses, 1- is Coiled, Most have QC End Fittings; 7- Air Guns - 4- have 2 ft. long (est.) Extensions.

78 – LOT OXY - ACETYLENE TORCH CUTTING AND WELDING SETS Consisting of 2- Regulators, Torch; Hoses; Face Shield and Gas Bottle Cart (NOTE: GAS BOTTLES ARE NOT ITEMS OF THE SET.); With OXY - ACETYLENE TORCH CUTTING AND WELDING SET

Consisting of 2- Regulators, Torch; Hoses; and Gas Bottle Cart (NOTE: GAS BOTTLES ARE NOT ITEMS OF THE SET.);

With OXY - ACETYLENE TORCH CUTTING AND WELDING SET Consisting of 3- (approx.) Regulators, Gauges; Hose; and Gas Bottle Cart. (NOTE: GAS BOTTLES ARE NOT ITEMS OF THE SET.)

METAL WORKING EQUIPMENT 79 – ACCURPRESS HYDRAULIC PRESS BRAKE

713010 s/n 3546 (Mfg. 05/1996) 130 Ton, 10 ft. long, Bed Length; Back Squaring Attachment.






80 – LOT COMPONENTS FOR MODEL 713010 PRESS BRAKE, LOT 79 Consisting of but not necessarily limited to: 20- Dies (approx.), Assorted from 1 ft. to 8 ft. long (est.), NOTE: Stored in Multiple Places including Portable Die Truck, in a Side-Positioned Storage Rack and on the Back of the Unit.

81 – CUSTOM DESIGNED AND FABRICATED STORAGE RACK, CANTILEVERED, HEAVY DUTY 4- Bay, 5- Tier Storage Arms, 24 in. tall x 20 ft. long, x 60 in. deep (est.). (NOTE: Item on Rack with Lot 80 Tag is NOT included.)

METAL CUTTING SHOP 82 – HEM INC HORIZONTAL BAND SAW

H90A-B/F s/n 483496 Powered by 3 hp Electric Motor; with 1- 10 ft. 8 in. long Roller Equipped In-Feed Table; 1- 5 ft. 5 in. long Roller Equipped Out-Put Table.

83 – HYD-MECH HORIZONTAL BAND SAW S-20 Series II s/n 60296151 Powered by 2 hp Electric Motor with 1- 175 in. long Roller Equipped In-Feed Table.

84 – JOHNSON HORIZONTAL BAND SAW Model J s/n J-16680 Powered by 2- hp (est.) Electric Motor with 1-7 ft. 2 in. Roller Equipped In-Feed Table.

85 – CUSTOM DESIGNED AND FABRICATED RAW MATERIAL HANDLING CLASSIFICATION RACK, PORTABLE, FABRICATED STEEL 40 in. high x 24 in. wide x 18 ft. long, having Top Mounted, Full Length Gravity Roller Conveyor, 6- Classification Levels, Center Divided with Cantilevered Arms and Shelves.

86 – UNI-HYDRO, INC. IRON WORKER, 66 TON Model 66.24, 66 Ton s/n 3P661375X With Safety Foot Cycle Switch.

87 – HARRISON ENGINE LATHE Model L 15" MK III 15 in. Swing, 2 in. Hollow Spindle, 45 in. (approx.) Center-to-Center, with 10 in. dia. 3- Jaw Chuck, Hardened Bed Ways, NEWALL Model DP7 Digital Read-Out System.

88 – LOT SUPERMAX 7 IN. LATHE AND TOOLING LG-1340, 7 in. Swing s/n W85 05-040 (Mfg. 1985) 32 in. (approx.) Center-to-Center, with 7 in. dia., 3- Jaw Chuck, 1-1/2 in. dia. (approx.) Hollow Spindle, with 1- 8 in. dia. 4- Independent Jaw Chuck; 1- box Misc. Tooling.

89 – SHARP TURRET MILLING MACHINE Sharp-LMV s/n 75128547 (Mfg. 1986) ACU-RITE 5, 9 in. x 42 in. T-Slotted Bed, with ACU-RITE III Digital Read-Out System.






90 – LOT TOOLING AND MATERIAL PROGRESS CART Consisting of but not necessarily limited to: 4- Chucks, 20-(approx.) Twist Drills, 16- Collets, Hammer, Wrenches, Flat Files, MLIC Hold-Down Kit, Air Powered Grinder and Related.

91 – LOT TOOL CABINET WITH CONTENTS FOR LATHE Consisting of but not necessarily limited to: 1- 3- Shelf Metal Storage Cabinet, 3- Head Stock Face Plates, 1- 4 in. dia. (est.) Chuck, 2- Boxes Tools Containing 6- (approx.) End Mills, (NOTE: Appear to be New/Unused) and Related Items.

92 – LOT DIE GRINDER / DRILL PRESS / WORK TABLE Consisting of but not necessarily limited to: 1- FLEXARM Air Tool Grinder Head having Parallelogram Extension Arm s/n 018041. With JET DRILL PRESS, BENCH-TYPE, 15 IN.

Model J-2530, 15 in. s/n 16070684 (NOTE: Lots 92 and 94 are mounted on Heavy Duty Portable Steel Work Table, 32 in. wide x 72 in. long, having a 6 in. Holding Vise.) (NOTE: Lot 92 is mounted on a Pallet Jack.)

93 – CLAUSING DRILL PRESS, FLOOR, SINGLE PEDESTAL TYPE Model 2276 s/n 530495 Having VCRO-KUEL x & y Adjusting Work Table with Vise, powered by 1-1/2 hp Electric Motor.

94 – JET DRILL PRESS, BENCH TYPE JDP-14J s/n 8010036 Stock No. 354068, with JACOBS 34-33 33 Taper Chuck, mounted on Portable Steel Stand.

95 – WILTON® DRILL PRESS, FLOOR TYPE, SINGLE PEDESTAL Type 24200 s/n 30646 8- Spindle Speeds, with Intermediate Adjustable Height Work Table, JACOBS 3A3 Taper Chuck.

96 – LOT WORKTABLE WITH BACKBOARD AND CONTENTS OF TOOLS Consisting of but not necessarily limited to: 3 ft. high x 4 ft. long (approx.) Steel Work Table with 4 ft. x 5 ft. (approx.) Backboard having Twist Drills, Taps, Adjustable Pipe Wrench and related.

97 – CLAUSING DRILL PRESS, FLOOR TYPE Model 2274 s/n 511309 Powered by REULAND 1-1/2 hp (est.) Electric Motor.

98 – KENT-OWENS HORIZONTAL MILL Model 2-20 s/n 2-20-350 Having 12 in. x 42 in. T-Slotted Bed.

99 – UNASSIGNED

100 – DAYTON BENCH GRINDER, DUAL WHEEL Model 2Z315-0 Powered by 1/3 hp Electric Motor, 1- 6 in. dia. and 1-8 in. dia. Grinding Wheel, mounted on Single Floor Type Pedestal.






101 – BELT AND DISC SANDER With 12 in. dia. Disc, 6 in. x 21 in. Belt, powered by 1/2 hp Electric Motor s/n 90190, Single Pedestal, Floor Mount.

102 – DAREX PRECISION DRILL SHARPENER M4/5 s/n 54418 Powered by 1/3 hp Electric Motor mounted on Single Pedestal Floor Stand.

103 – DAYTON COMBINATION BELT AND DISC SANDER 2PA29 Mounted on Metal Stand.

104 – WESTWARD MACHINERY TOOL CHEST, 5- DRAWER On Castor Wheels, with Contents consisting of but not necessarily limited to: Flat Files, Hammers, Tapes, Screw Drivers, Wire Brushes and related.

105 – LOT GRANITE BLOCK AND TEST INSTRUMENTS Consisting of but not necessarily limited to: 1- 3 in. high x 18-1/2 in. deep x 24 in. long Granite Block, 2- Combination Squares, 1- 23 ft. long Square, 1- Inside/Outside Caliper, 1- Height Caliper, 1- Center Locating and Protractor Combination Square, 1- Scribe Caliper, 1- 90° Block, mounted on Metal Stand.

106 – WORK TABLE 31 in. wide x 72 in. long, Metal with Wood Top, and 1- Stool.

107 – ACROPRINT TIME CLOCK Analog.

108 – LOT U-LINE AND OTHERS PLASTIC SHELF BINS, ASSSORTED 250 (est.) Count, (NOTE: All are Empty of Contents and Used).

109 – LOT LYON STORAGE CABINET, 2- BAY, EACH BAY HAVING 4- SHELVES WITH CONTENTS Consisting of but not necessarily limited to: 4- Band Saw Blades, 1- is BAHCO, 2- are LENAX, all appear to be 12 ft. 10 in. x 1 in. x .035; 4- 6 in. dia. Wheels having Polyester Tires.

110 – SIGNODE METAL BANDING UNIT, PORTABLE Having Banding Supply Reel, 2- Tensioning Tools, 2- Crimping Tools, 1- Metal Snips.

111 – PALMGREN 3 C- FRAME PRESS, MANUAL, 3- TON No. 3 Mounted on a 35 in. high x 30 in. wide x 30 in. deep Steel Table.

112 – CUSTOMED DESIGNED AND FABRICATED HYDRAULIC PRESS, C-FRAME Having MAXIM Hydraulic Cylinder, 3, 000 psi, 3.5 in. Bore, 12 in. Stroke, 1.75 in. Rod dia.






MACHINE SHOP OFFICE 113 – LOT CONTENTS OF ROOM

Consisting of but not necessarily limited to: Medical First Aid Cabinet, Steel, Wall mounted with Related Contents; Storage Cabinet, Steel 6 ft. long (approx.) with Contents of 3M Yellow Ear Plugs, Work Gloves, Tap and Die Set (incomplete); 4- DEWALT 90° Grinders; 1- Box DEWALT Grinder Parts; Oxyacetylene Pressure Gauges and Regulators; 3- Boxes of Twist Drills and Taps 7/8 in. and smaller.

114 – LOT SHELVING AND TOOLING With 12 (approx.)- UNIT TOOL PUNCH ATTACHMENTS

HH2-1/2, C- Type In Wood Crate, (NOTE: 2- are in Wood Crate to the right); With UNI PUNCH MISCELLANEOUS CHUCK JAWS

8A 1-1/2 Contained in 2 Wood Crates; With RECTANGULAR TUBING PIECES AND RELATED, STEEL; With 21+ (approx.)- STRIPPIT PUNCHES In Wood Box; With MISCELLANEOUS STEEL

Consisting but not necessarily limited to: Press Break Dies, Plate, Rounds and Other contained in a box and a pallet;

With STORAGE SHELVING WITH CONTENTS Consisting of Twist Drills; Tap and Die Sets; Mills, Reamers; and consisting of but not necessarily limited to: Drills from 1-13/16 in. and smaller; 3- Tap and Die Sets and Related.






TOOL ROOM TEST EQUIPMENT 115 – LOT GRANITE BLOCK AND TOOLS

With TRU-STONE CORPORATION GRADE B GRANITE BLOCK 5374 9 in. high x 43 in. wide x 52 in. long, mounted on Steel 4- Leg Base.

With PRECISION GRANITE CO. GRADE B GRANITE BLOCK D-64 (Date Mfg. 2/22/1991) 3-1/4 in. high x 18 in. wide x 24 in. long, Overall Accuracy ± .00015, mounted on Fabricated, Portable, Metal Stand.

With KANON INSIDE / OUTSIDE STAINLESS CALIPERS 60 in./150 cm, graduated 1/1000 in. /150 mm, in Wood Case.

With 4- DIAL CALIPERS AND HEIGHT CENTERING TOOLS 433394 Consisting of but not necessarily limited to: 1- AEROSPACE Inside/Outside, 12 in. Stainless Steel, Hardened, in Wood Case; 1- FOWLER Inside/Outside, Digital Read-Out, 6 in./150 mm, in Plastic Case; 1- Inside/Outside Stainless Steel, Hardened, 6 in. s/n QN09017980, in Plastic Case; 1- Height/Centering Tool, in Plastic Case (NOTE: Is Incomplete);

With 3- SQUARES Consisting of but not necessarily limited to: 1- 23-1/2 in. x 15-1/2 in. (approx.), 1- 11 in. x 7-3/4 in. (approx.), 1- Set Magnetic Squares having 4- Squares;

With 3- HEIGHT MEASUREMENT CALIPERS Consisting of but not necessarily limited to: 1- ETALON Twin Column 12 in. capability, 77.29000, .001, having Rotary Digital Readout; 1- MITUOYO Stainless Steel, 10 in. Capacity, .001; and Other Related;

With 3- PRECISION LEVEL, PROTRACTOR AND LEVEL / ANGLE FINDER Consisting of but not necessarily limited to: 1- MOORE AND WRIGHT 12 in. 300 mm Precision Level, .001 in. per 10 in. / 0.1 mm/m, in Wood Case; 1- CRAFTSMAN No. 939840 Protractor, having Magnetic Base and Back; 1- MAYES BROTHERS Level and Angle Finder having Magnetic Base;

With 4- PUNCH STAMPS Consisting of but not necessarily limited to: 2- Sets Alpha/Letter Punch Sets, 2- Sets Numeric Punch Sets.

116 – LOT 2- WELDING TABLES With WELDING TABLE, HEAVY DUTY

36 in. high x 48 in. wide x 56 in. deep, having 3/4 in. tall Plate Steel Top, 4- Legs; With WELDING TABLE, ADJUSTABLE

35-1/2 in. high x 42 in. x 42 in., constructed from 2 in. x 2 in. Square Steel Tubing; with 1- in. tall x 12 in. wide x 60 in. long having 3- Rows of Threaded Holes Drilled Through; 1- 4 in. Channel Steel x 70 in. long; 1- 1 in. tall x 8 in. x 2 ft. long having 3 in. tall Sides.






117 – LOT 22 (approx.)- VISE GRIP® ADJUSTABLE WELDING C-CLAMPS 11R & 6R Consisting of but not necessarily limited to: 16- Model 11R; 2- 6R; 2- Modified 'Deep Throat'.

118 – LOT 4- BOXES ADJUSTABLE WELDING C-CLAMPS With 6 (approx.)- WILTON® ADJUSTABLE WELDING C-CLAMPS

Consisting of but not necessarily limited to: 1- SQ12; 1- 610; 1- SQ8; 3- SQ6 (approx.);

With 5 (approx.)- STRONG HAND ADJUSTABLE WELDING C-CLAMPS UG125 (NOTE: Very Good Condition-appears to be Unused);

With 4 (approx.)- WILTON® ADJUSTABLE WELDING C-CLAMPS SQ12; With 5 (approx.)- ADJUSTABLE WELDING C-CLAMPS

Consisting of but not necessarily limited to: 2- J.H. WILLIAMS & Co., Modified, Bolt-Down Base C- Clamp; 2- VISE GRIP® Modified, 16 in. 'Deep Throat'.

119 – LOT CUSTOM DESIGNED AND FABRICATED WORK TABLE, HEAVY DUTY STEEL, ON WHEELS 38 in. high x 42 in. deep x 80 in. long having Steel Top, 1- Shelf with BABCO 616 Vise.

120 – LOT TOOLS AND FIXTURES Consisting of but not necessarily limited to: Indexing Head, Coil Springs, Combination Wrench Set, Wire Brush, (NOTE: New/Unused), Welders and Work Gloves (NOTE: New/Unused), AM/FM Radio Cassette Player and Related; With 12 (approx.)- HAND AND POWER TOOLS AND RELATED

Consisting of but not necessarily limited to: 1- Set Combination Wrenches, 5/16 in. to 7/8 in.; 2- Boxes containing Wire Brushes, Files, Long Nose Pliers, Rasp, Screw Drivers, Safety Eye Glasses, 12- (approx.) Assorted Gloves, Leather and Fabric; 1- Tool Box with Tray; 1- JET Air Powered Hand Grinding Tool; 1- Box (partial) of PHOENIX Abrasive; 4.5 x 7/8 Resin Fiber Disc and Related.

121 – ALLWIN (OR SIMILAR) DUAL HEAD GRINDER / BUFFER Model TDS-200 Powered by 3/4 hp Electric Motor, with 2- Wire Brush Wheels, Single Pedestal, Floor Mounted.






122 – LOT 7 (approx.)- STORAGE SHELF, SUPPLY CABINET, BACK BOARD WITH CONTENTS Consisting of but not necessarily limited to: Tractor Draw Bars, Drag Links, Hoses, 2- 32 in. long Draw Bars (1- appears Unused); 1- 26 in. long Draw Bar; 1- JS2024R Top, Cat. II, 1 in. dia. x 29 in. long Adjustable Drag Link (appears Unused) Folding Leg Table, 8 ft. long and related; With 2- STORAGE UNITS

1- Steel Portable Storage Shelf; and 1- with 5- Shelves with 14- (approx.) Storage Bins/Compartments, Wood;

With WALL CABINET, MOUNTED.

123 – CUSTOM DESIGNED AND FABRICATED INCLINE RAMP, HEAVY DUTY Ramp is 0-39 in. high and is adjustable, 12 ft. 8 in. long x 7 ft. 8 in. wide (approx.).

124 – LOT 2- CANTILEVERED STORAGE RACKS Consisting of but not necessarily limited to: 2- Cantilevered Storage Racks: 1- is 6 ft. high x 4 ft. deep x 8 ft. 3 in. long and 1- is 6 ft. high x 4 ft. deep x 82 in. long.

125 – ENCO CARBIDE TOOL GRINDER, 6 IN. Model TC-302 (Mfg. 1985) Powered by Electric Motor, mounted on Single Pedestal Floor Mount.

126 – LOT MATERIAL HANDLING BIN, STEEL 21 in. high x 40 -1/2 in. deep x 60 in. wide, having Forklift Pockets, with 1- Pallet, 1- Wood Crate and Miscellaneous Contents.

127 – LOT CONTENTS OF BREAK ROOM Consisting of but not necessarily limited to: Refrigerator; 2- Microwave Ovens, 1- SHARP Carousel and 1- KENMORE; 3- 6 ft. long Folding Leg Tables; 19 - Stacking Chairs; 12- Folding Chairs, Steel; 1- 5 ft. long Flag; FUNAI VHS Player.

128 – LOT CLEANING AND MAINTENTANCE EQUIPMENT With 5 (approx.)- FLOOR PUSH BROOMS; With 7 (approx.)- HAND TOOLS

Consisting of but not necessarily limited to: 1- Square Point Shovel; 1- Snow Scraper; 1- Garden Rake; 3- Brooms.

129 – LOT 2- BOXES CARGO TIE-DOWN STRAPS AND RATCHETS Consisting of but not necessarily limited to: 2- Boxes containing LIFT ALL Load Huggers®, 3,333 lbs. Work Load Limit, 10,000 lbs. Assembly Break Limit Cargo Straps; 5- Cargo Strap Ratchet Assemblies; 6 + Pieces of Chain, Chain Boomer, Cargo Netting, Flat Belt.






130 – LOT WESTWARD TOOL CHEST AND STORAGE SHELF WITH CONTENTS Consisting of but not necessarily limited to: 1- WESTWARD 5- Drawer Tool Chest with Miscellaneous Contents, 1- NAPA and 1- CAMPBELL HAUSFELD 1/2 in. Air Powered Impact Wrench, 6- Combination Wrenches, Metal Storage Shelf with Tap and Die Wrench, 2- Boxes of Twist Drills, Parts Chest, 3- Hand brushes with Dust Pan, 1- Electric Drop Light, 1- Electrical Power Extension Cord.

131 – LOT STORAGE SHELF WITH CONTENTS Consisting of but no necessarily limited to: 1- Dust Pan with 3- Hand Brushes, Florescent 'Drop Light' with Extension Cord, Multi-Bin Fastener Cabinet, Plastic Parts Bins, Consumable Aerosol Supplies.

132 – HUSQVARNA® WEED TRIMMER Model 128L s/n 10068N200343 Straight Shaft.

133 – LOT UNLOTTED CONTENTS OF ROOM, NW CORNER 3- Crates, Wood, consisting of but not necessarily limited to: 1- Box containing Metal Storage Shelving Components; 2- Boxes containing Unidentified Contents. With 4- pallets MISCELLANEOUS CONTENTS

Consisting of but not necessarily limited to: 1- DANLY Water Hose; Steel Fixtures; 1- Plastic Storage Box with Contents; 1- CM Model WE 1- Ton Geared Chain Hoist; 7- PARKER 451ST-16 3000 psi Hydraulic Hoses and Fittings.

134 – SAFETY KLEEN PAINT SPRAY GUN AND EQUIPMENT CLEANER Model 1107 s/n 7069741.

135 – LOT EAGLE MANUFACTURING CO. SAFETY STORAGE CABINET Model 1947 45 gal. capacity.

136 – LOT ALC SANDY JET ABRASIVE BLASTER AND MARTECH Quality Air Breathing System 1- Abrasive Media Pot, 1- Abrasive Hood, 1- Rack with 40- (approx.) Material 'S' Hook Hangers.

137 – LOT 2 (approx.)- CUSTOMED DESIGNED AND FABRICATED PAINTING AND MATERIAL HANDLING RACK, PORTABLE A- Frame Type, 6 ft. high x 4 ft. wide x 80 in. long.

138 – CUSTOMED DESIGNED AND FABRICATED HORIZONTAL AXIS, A-FRAME STRUCTURAL END MEMBERS, HAVING INDEXING ROTATING HEAD 64 in. high x 68 in. wide x 14 ft. long (NOTE: The length is adjustable to shorter distance-current set-up appears to be near max extension capability).

139 – LOT 3- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL On 4- Wheels, 59 in. high x 78 in. wide x 60 in. depth (approx.).






140 – LOT 3- CUSTOM DESIGNED AND FABRICATED PAINTING AND MATERIAL HANDLING CARTS, PORTABLE 3- are 50 in. high x 34 in. wide x 72 in. long.

141 – LOT 2- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL On 4- Wheels, 38 in. high x 5 ft. wide x 12 ft. long (approx.).

142 – LOT 2- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL On 4- Wheels, 22 in. high x 6 ft. wide x 5 ft. 8 in. long (approx.) Drop-Center Design.

143 – LOT 4 (approx.)- SAW HORSES, STEEL 2- are 32 in. high x 85 in. long (approx.) 2 - are 30 in. high x 83 in. long (approx.); 1- U-Frame Stand, Adjustable Width.

144 – LOT 4 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL On 4- Wheels, 29 in. high x 2 ft. wide x 50 in. long (approx.).

145 – LOT 5 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL On 4- Wheels, 29 in. high x 2 ft. wide x 50 in. long (approx.).

146 – LOT 5 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.



149 – LOT 5 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4- Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.

150 – LOT 5 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4- Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long.







152 – LOT 8 (approx.)- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING DOLLIES, STEEL Having Expanded Metal Shelf Flooring and Sides, 1- Side is Hinged for Drop-Down Access, on 4 Wheels, 43-1/2 in. high x 24 in. wide x 48 in. long; 1- 44 in. high x 24 in. wide x 72 in. long and 1- 44 in. high x 18 in. wide x 38 in. long (approx.) having Expanded Metal Basket Top.

153 – LOT 3- MATERIAL HANDLING CARTS, STEEL Medium Duty, 2- are 35 in. high x 24 in. wide x 36 in. long, (approx.) on 4- Castering Wheels; 1- is 32 in. high (approx.). With MATERIAL HANDLING CART, PLATFORM, RAILROAD DOCK TYPE

On 4- Wheels, Wood Deck, Push Hand Bar on 1- end.

154 – LOT 2- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING CARTS With Solid Plate Steel Top, mounted on 4- Wheels, 44 in. high x 24 in. wide x 51 in. long (approx.).

155 – LOT CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING TABLE, STEEL 36 in. high x 46 in. wide x 84 in. long (approx.) and 1- 74 in. tall Post having 4 in. dia. Steel Ring at Top, 9 in. x 97 in. long Channel Steel Base.

156 – LOT 2- CUSTOM DESIGNED AND FABRICATED INDEXING, HORIZONTAL AXIS WORK POSITIONING / WELDING WORK HOLDING JIGS, MANUALLY OPERATED 48 in. high x 37 in. wide x 24 in. long, T-Shaped Base. With 2- CUSTOM DESIGNED AND FABRICATED HORIZONTAL AXIS, WORK

POSITIONING / WELDING WORK HOLDING JIGS, MANUALLY OPERATED 49 in. high x 48 in. wide x 28 in. deep T-Shaped Base constructed from 9 in. Channel Steel.

157 – CUSTOM DESIGNED AND FABRICATED ASSEMBLY / WELDING POSITIONING JIG HYDRAULIC POWERED Having 22 in. x 19 in. T-Shaped Base, HARLEY Independent Hydraulic Power Unit with 1- 20 in. dia. (approx.) Circular, Rotating Attachment Plate.

158 – LOT CENEX HYDROSTATIC FLUID TANK, 55 GAL. CAPACITY Item No. 094-326 having Crank Type Hand Fluid Pump, Filter Cartridge, mounted on 40 in. high (approx.) 4- Leg Steel Stand.






159 – LOT 7 (approx.)- WORK-IN-PROGRESS SUPPORT STANDS 3- are Adjustable Height, Steel; 3- have Roller Heads; 4- have Ball Bearing Heads; 1- has Max Height of 52 in.; Most have Working Height of 32 in.

160 – STORAGE SHELF, STEEL, DUAL SIDE Each Side having 9- Inclined Shelves, 65 in. high x 25 in. deep x 36 in. wide (approx.) (NOTE: Empty, No Contents.).

161 – LOT INGERSOLL RAND ROTARY SCREW AIR COMPRESSOR Model SSR-UP6-20-125 s/n PX4490U05013 125 psig, 83 cfm max, 460/3/60 Electrical Supply Requirements, 29,550.6 Indicated Meter Hours. With INGERSOLL RAND AIR DRYER, REFRIGERATED

DS100 2757960002 115/1/60 Electrical Supply Requirements. With STEEL-AB VERTICAL AIR RECEIVER TANK

Nat. Bd. No. 374791 (Mfg. 2005) 30 in. dia. x 68 in. (seam-to-seam) (approx.) Domed on Both Ends, Skirted at Bottom.

With INGERSOLL RAND FILTER IRHE 125 4251565.

162 – KAESER SX6 ROTARY SCREW AIR COMPRESSOR Model TAH6 s/n 1152 (Mfg. 2006) Part No. 1.3009.00100 Non-Cycling Refrigerated Air Dryer Mounted on 120 gal. (est.) Horizontal Air Receiver Tank.

163 – SPEEDAIRE® PORTABLE AIR COMPRESSOR / AC GENERATOR Model 4NB86 s/n 61020113619 Powered by HONDA GX200 Air Cooled Gasoline Engine. 2- Horizontal Air Receiver Tanks, mounted on Pneumatic Tires.

164 – FASTENAL COMPANY PALLET JACK 5,500 lbs. capacity.



167 – PALLET JACK 5,500 lbs. capacity (est.).

168 – LOT 4 (approx.)- BARREL AND MATERIAL HAND TRUCKS 1- having Portable, Octagonal Base, and Pneumatic Tires, and 1- having Solid Tires; Dolly, 60° Corner, with 4- Castering Wheels. With BARREL HAND TRUCK For 55 gal. Barrels, 1000 lbs. capacity.

169 – LOT 12- bays / sections STORAGE SHELVING, STEEL Solid Sides and Shelves, Open Back, Each Bay/Section is 7 ft. high x 2 ft. deep x 3 ft. wide, each having 5- Shelves, with Contents of Assorted Plastic Parts Bin Boxes.

170 – LOT 5- bays / sections PALLET RACK SHELVING 5- Bays/Sections, each is 12 ft. high x 42 in. Deep x 10 ft. long having 3- Shelves Floored with Multiple Boards 2 in. x 6 in. (approx.).






171 – LOT 6- PALLETS, WOOD OEM Shipping, Wood, 112 in. x 6 in. height x 60 in. wide (approx.) (NOTE: Appears to be New/Unused).

172 – LOT 2- pallets DONALDSON® TORIT® FILTER ELEMENTS White, 10 (approx.) Filters.

SHIPPING AREA 173 – LOT 3- U-LINE, PELOUZE, FAIRBANKS SHIPPING SCALES

Consisting of but not necessarily limited to: 1- U-Line, Model LAC-1260, 26 lbs. capacity; 1- U-Line, Model JCE-30K, 60 lbs. capacity; 1- PELOUZE, Model 4010, 125 lbs. capacity; FAIRBANKS Portable, Balance Beam Platform Scales 500 lbs. capacity Platform.

174 – LOT SHIPPING AREA FIXTURES, EQUIPMENT Consisting of but not necessarily limited to: 1-30 in. x 60 in. Double Pedestal Desk, Steel; 1- Folding Leg Table, 30 in. x 60 in., Fair Condition; 1- Work Shelf, Wood, 8 ft. long x 29 in. deep.

175 – SHIPPPING SUPPLIES Consisting of but not necessarily limited to: SIGNODE Steel Strapping, 3- Rolls of Shrink Wrap, Filament Tape and Related; 2- Rolls of Foam Wrapping/Cushioning.

176 – CABINET, PORTABLE Having 7- Drawers, and related Shipping Item Contents.

177 – LOT PALLET RACK SHELVING 4- Bays/Sections, Each Section is 10 ft. high x 42 in deep x 8 ft. long, having 3- Shelves in Each Section, Shelving Flooring on 2- Sections is Plywood, on 2- Sections it is Wire Mesh; With 2- Hose Reels (With Air Hoses).

178 – WORK BENCH Steel Structural Base with Wood Top, 3 ft. wide x 12 ft. long (NOTE: Is 1- Piece).

179 – LOT 8- bays / sections PALLET RACK SHELVING 4- Bays/Sections, Each Section is 12 ft. high x 42 in. deep x 10 ft. long having 3- 2 in. x 6 in. Flooring Boards; 4- Bays/Sections are 10 ft. high x 42 in. deep x 8 ft. long, having 3- Plywood Flooring Pieces.

180 – LOT 4- bays / sections PALLET RACK SHELVING 4- Bays/Sections, 2- Bays are 12 ft. high x 42 in. deep x 9 ft. long, 3- Shelves are Plywood; 2- Bays are 10 ft. high x 42 in. Deep x 8 ft. long, 3- Shelves are Plywood.

181 – LOT TOOLBOX, PICKUP CROSSBED Molded Plastic, 6 ft. wide, Locking.

182 – LOT 4- PARTS, FASTENERS AND FITTINGS STEEL CARTS, RACKS, TABLE All are Portable on Castering Wheels, 42 in. to 48 in. high x 4 ft. to 6 ft. long, 4- Carts have Plastic Display/Storage Bins, Some have Related Consumable Parts.






183 – LOT 3- CARTS, PORTABLE WITH CONTENTS OF PARTS, FASTENERS AND FITTINGS Consisting of but not necessarily limited to: Bins containing Fasteners, Roller Chain, Wire, Hand Tools, Leather Gloves, Tape and related.

184 – LOT 2- STORAGE SHELVING UNITS, STEEL. 1- is 5- Bay/Section, Solid Side, Open Back, 7 ft. high x 3 ft. wide Each Bay, 4- Shelves; 1- is 6- Bay/Section, Open Side and back, 4- Shelves, 8 ft. high x 3 ft. wide, 4- Shelves.

TOOL CHEST 185 – CRAFTSMAN MACHINEST CHEST, PORTABLE

14- Drawer, Ball Bearing, Grip Latch, each Drawer has Contents consisting of but not necessasrily limited to: 4- (approx.) Sets of Deep Sockets for 1/4 in. and 3/8 in. Drive; 1-3/8 in to 7/16 in. Combination Wrenches; Air Impact Wrenches and Grinders with Deep Socket Set; 1-1/2 Open End Wrench; Pry Bar; 2 in. and smaller Open End and Combination Wrenches, MARSON Model 325-RN, Heavy Duty Thread Setter; CHICAGO PNEUMATIC 1 in. Drive Air Impact Wrench; 1-1/2 in. to 3/4 in. Die Set and Related.

186 – LOT CRAFTSMAN MACHINEST TOOL CHEST AND WORK BENCH, PORTABLE Consisting of but not necessarily limited to: CRAFTSMAN 8- Drawer chest having Hinged Top Tray, with Contents of Hand Tools, 1- Work Bench, Steel with Wood Top, 33 in. high x 2 ft. deep x 4 ft. long, having Mid and Bottom Shelf with Contents of Hand Tools.

187 – LOT CRAFTSMAN MACHINEST TOOL CHEST AND WORK CART, PORTABLE Consisting of but not necessarily limited to: CRAFTSMAN 6- Drawer 'Quiet Glide' Tool Chest having Hinged Top with Contents of Tools; Work Cart is 32 in. high x 24 in. deep x 38 in long, Steel on Castering Wheels.

188 – LOT CRAFTSMAN MACHINEST TOOL CHEST AND WORK CART, PORTABLE Consisting of but not necessarily limited to: CRAFTSMAN 6- Drawer 'Quiet Glide' Tool Chest having Hinged Top with Contents of Tools; Work Cart is 32 in. high x 24 in. deep x 38 in long, Steel on Castering Wheels.

189 – LOT 10 (approx.)- PIPE CLAMPS 1 in. dia. x various lengths 93 in. to 32 in. (approx.) long.

190 – LOT NAPA HYDRAULIC POWER UNIT, 10- TON, PORTABLE Having Cylinder Unit, 5- Application Fittings, with Plastic Storage/Carrying Case.

191 – LOT WESTWARD HYDRAULIC POWER UNIT, 4- TON, PORTABLE With Ram Extension, Expander Jaw, with Plastic Storage/Carrying Case.






192 – LOT OMEGA HYDRAULIC POWER UNIT, 10- TON, PORTABLE With Body Repair Kit, with Plastic Storage/Carrying Case (NOTE: Unit appears to be Complete with all of its originally assigned Components).

193 – LOT 3- CUSTOM DESIGNED AND FABRICATED MATERIAL HANDLING CARTS Steel, 43-1/2 in. high x 24 in. wide x 48 in. long, having Expanded Metal shelf Flooring and Sides, 1- Side is Hinged for Fold-Down Access, on 4- Wheels.

194 – LOT CUSTOM DESIGNED AND FABRICATED WORK BENCH AND HAND TOOLS Consisting of but not necessarily limited to: Work Bench, heavy Duty, Wood, 38 in. high x 30 in. deep x 8 ft. long (approx.), having Peg Board Back Board, Mid-Shelf; WILTON 6 in. Vise, 1- Set of GRIP™ 2 in. to 1 ft. 16 in. Open-End Crow Feet Wrenches Related Tools, Hand and Power; 1- Stool; Heat Gun.

195 – NAPA BATTERY CHARGER AND STARTER 85-2250 Portable on 2- Wheels; (NOTE: Appears to be in VG Condition.).

196 – LOT AC DELCO™, TORIN FLOOR JACKS, HYDRAULIC Consisting of but not necessarily limited to: 1- AC DELCO 3-1/2 Ton Heavy Duty Garage Jack, Hydraulic, Portable; 1- TORIN 2- Ton Hydraulic Trolley Jack, Portable.

197 – LOT HAND TOOLS Consisting of but not necessarily limited to: 3- Open-End Wrenches, 2 in. to 1-1/2 in.; Hammers; Mallets; BEHRENS Oil Can; Funnels; 5- Grease Guns, Deep Socket Set; 3- Drill and Tap Sets; Flash Lights, NAPA 2-1/2 in. dia. Muffler Clamps and Related. With LOT 10 (approx.)- STEWART WARNER, DATCAN, NAPA AND VDO® OIL

GAUGES AND RELATED Consisting of but not necessarily limited to: 4- STEWART WARNER Model 279A Pressure Sender Kit, (Appear to be New/Unused in OEM Box); 1- is STEWART WARNER Model 284-L Oil Pressure Gauge, (Appears to be New/Unused in OEM Box);1- DATCON Part No. 100172 09-05 Oil Pressure Sender Unit; 1- VDO® Model 360-801 Oil Pressure Sender Unit; and 5- (approx.) Related Items.

198 – LOT 4- NAPA JACK STANDS 520-2000 Consisting of but not necessarily limited to: 4- of which are NAPA Model 520-2000 6 ton Jack Stands.

199 – 2- BIG RED JACK STANDS T43002 3- Ton (NOTE: have been modified to increase height).

200 – LOT 3- 1 gal. bottles JOHN DEERE BREAK-IN PLUS MOTOR OIL SAE 10 W-30.






201 – LOT 3- EVERCRAFT, LARIN, AC DELCO MECHANICS FLOOR CREEPERS, PADDED Consisting of but not necessarily limited to: 1- EVERCRAFT, 1- LARIN, 1- AC DELCO.

202 – LOT 2- CARQUEST MECHANICS FLOOR CREEPERS Rigid with Headrests.

203 – LOT WORKTABLE AND VISE Steel, 32 in. high x 24 in. deep x 96 in. long (est.).

204 – CENEX MULTIPURPOSE HIGH TEMPERATURE GREASE WITH PUMP Molyplex 500 + Premium Having STEWART-WARNER Air Operated Pump, Part No. 8551-4 Grease Pump, s/n V-5 with Hose.

205 – LOT MATERIAL HANDLING CART WITH RELATED PARTS AND CONSUMABLES Consisting of but not necessarily limited to: 4- Hydraulic Hoses, 3/4 in. dia. x 3 ft. length (est.); Safety Glasses and Face Shield; Flexible PVC Tubing; 2- Equipment Attachment Pins; MAGIC Aluminum Cutting Fluid; Bag of Shop Tools; Material Handling Cart, Steel, 42 in. high x 23 in. deep, x 48 in. long, on Castering Wheels.

206 – LOT 6- WORK TABLES AND MATERIAL HANDLING CARTS Consisting of but not necessarily limited to: 1- Work Table, Steel with Wood Top Surface, 32-1/2 in. high x 3 ft. wide x 10 ft. long; 2 Material Handling Carts, Steel, 41 in. high x 24 in. wide x 48 in. long, having 3- Shelves, Plywood Bottom, on 4- Castering Wheels; 2- Material Handling Carts, Steel, 35 in. x 24 in. x 36 in. (approx.) on 4 Wheels, 1- is smaller, Portable, Steel.

207 – LOT 15- bays / sections STORAGE SHELVING, STEEL 15- total Bays/Sections consisting of but not necessarily limited to: 8- Bays/Sections are 7 ft. tall x 2 ft. deep x 3 ft. wide, Open Sides and Back, Each having 4- Steel Shelves; 7 Bays/Sections are 8 ft. tall x 2 ft. deep x 3 ft. wide.

208 – LOT GORBEL BRIDGE CRANE, FREE STANDING STEEL WORK STATION Having 16 ft. GORNEL 16 ft. Span, 1000 lbs. capacity having Air Powered travel Under-Slung Bridge; Pendent Controls; 4- Bay/Sections 16 ft. high x 16 ft. 3 in.(approx.) each Bay, total length 50 ft. (approx.) Runways, Each Section with Column and Header Weldments; With HARRINGTON 1/2 ton air Operated Geared Chain Hoist, having Pendant Controls, 8 ft. high (approx.) Hook Height, Manual Traverse, Air Supply Hose Festooning; With 1- Pallet containing 1000 lb. Bridge s/n G101560, 2- Column and 1- Header Weldments, Columns are 11 ft. high, Header is 13 ft. 6 in. long.

209 – VESTIL MOBILE GANTRY CRANE AHA Series (mfg. 12-2006) 2,000 lbs. capacity, 10 ft. 4 in. OAH, 11 in. approx. Inside Span, on 4- Castering Wheels, each with Wheel Lock; with COFFING Model JLC Geared Chain Hoist, 1,500 lbs. capacity, having Pendent Controls; COFFING 2- ton Traversing Hoist Trolley.






NORTH-EAST CORNER 210 – LOT 2- 55 gal. drums CENEX HYDROSTATIC FLUID

ISO46 MV 1- Barrel has a Hand Operated Gear Type Pump with Cartridge Type Filter and 5 ft. (est.) Hose (NOTE: 1- Barrel appears to be Empty, 1- Barrel apparently has been drawn from).

211 – LOT WORK BENCH AND REALTED CONTENTS Consisting of but not necessarily limited to: Heavy Duty Wood Work Bench, 37-1/2 in. high x 28-1/2 in. Deep x 8 ft. long with Mid-Positioned Shelf and Peg Board Back Stop; 11- (approx.) Plastic Parts Tubs and Bins.

212 – LOT LIFT ALL, US CARGO CONTROL, JUN KAUNG CARGO TIE-DOWN FABRIC STRAPPING WITH TENSION RATCHET. Consisting of but not necessarily limited to: LIFT ALL Load Hugger, US CARGO CONTROL and Others; 1- JUN KAUNG Cable Type Come-a-Long; 20-ton Hydraulic Jack. With TOOL BOX, PLASTIC With Contents. With 5 (approx.)- PRY BARS

With 1 in. Drive Socket Extension; 1- Crow Bar; 1- Welding Chipping Hammer. With 5 (approx.)- ROAD EMERGENCY SIGNAL KITS

Consisting of but not necessarily limited to: 1- Flashing Light Kit; 4- Reflective Triangle Kits.

213 – LOT 3- WERNER STEP LADDERS Consisting of but not necessarily limited to: 1- WERNER, Model FS104 MK10, 4 ft. Step Ladder, Fiberglass with Aluminum Steps, 250 lbs. Load Capacity; 1- WERNER, Model 150-4, 26 in. Step Ladder, 200 lbs. Load Capacity, all Aluminum; 1- 24 in. Step Ladder having Hand Hold Safety Bar, Aluminum.

214 – WERNER STEP LADDER 6008 MK9 8 ft. Step Ladder, Fiberglass with Aluminum Steps, 250 lbs., Load Rating.

215 – WERNER STEP LADDER 6008 MK9 8 ft. Step Ladder, Fiberglass with Aluminum Steps, 250 lbs., Load Rating.

216 – EGA PRODUCTS, INC. SAFETY LADDER, PORTABLE, ROLLING 5 ft. 10 in. high, Steel.

217 – LOT SHOP∙VAC WET/DRY VACUUM AND JUSTRITE® OILY WASTE CAN Consisting of but not necessarily limited to: 1- SHOP∙ VAC®, Model 92L625C, Wet/Dry Utility Vacuum, Portable, powered by 6.25 peak hp Electric Motor, 16 gal. capacity; 1- JUSTRITE®, Model 09100, 8 gal. capacity Oily Waste Can.

218 – BOSCH ARBOR TABLE SAW, TILTING ON FOLDER WHEELED STAND 4000 69213 1501 With Model TS2000 Table Saw Stand.






POWER HAND TOOLS 219 – LOT 5 (approx.)- INGERSOLL-RAND, NORTHERN INDUSTRIAL, JONESWAY AND

CHICAGO PNEUMATIC 1/2 IN. AIR POWERED IMPACT WRENCHES AND GRINDER.

220 – LOT JONESWAY AND EVERCRAFT 1/2 IN. AIR POWERED IMPACT WRENCHES AND DUAL ACTION SANDER and 1- Box of 6 in. (est.) Abrasive Disks.

221 – LOT STANLEY BOSTICH PNEUMATIC COIL NAILER N80CB-1 With 1- Box (partial) of 3-1/4 in. x .120, Bright, Smooth Shank, 314X120C, Wire Weld Coil Nails.

222 – GENESIS CIRCULAR SAW, 7-1/4 IN. 12 amp. 120 v AC.

223 – BLACK & DECKER DRILL WITH CHUCK, 1/2 IN.

224 – LOT 2- MAKITA POWER HAND TOOLS Consisting of but not necessarily limited to: 1- Model N9514B 4 in. 90° Hand Grinder; 1- Model N/A 1/4 in. Hand Drill.

225 – MAKITA HAND GRINDER, HEAVY DUTY, 7 IN. (EST.) 90°.

226 – MILWAUKEE BAND SAW, HEAVY DUTY, DEEP CUT Cat. No. 6225 457F40237056.

227 – MILWAUKEE HAND GRINDER, 6 IN. (EST.) 90° Cat. No.6082.

228 – LOT MILWAUKEE MULTI-VOLTAGE CHARGER AND BATTERIES Cat. No. 48-59-1812 Having 3- M18 Lithium Batteries.

229 – MILWAUKEE IMPACT WRENCH, 1/2 IN. DRIVE Cat. No. 2663-20 880AD14100472 With Charger and M18 Red Lithium XC Spare Battery, All mounted in a Molded Plastic Carrying Case.

230 – MILWAUKEE DRILL WITH CHUCK, 1/2 IN. M 18 With Charger and M18 Red Lithium XC Spare Battery.

231 – LOT 4 (approx.)- MILWAUKEE IMPACT WRENCH Cat. No. 2763-20 F42CD1621 0039 Consisting of Drive Impact Wrench, with Battery Charger and M18 Red Lithium Spare Battery, Molded Plastic Carrying/Storage Case.

232 – LOT 3 (approx.)- DEWALT ANGLE GRINDERS, 4-1/2 IN., 90° DW402 Type 2.










237 – DEWALT PADDLE SWITCH, SMALL ANGLE GRINDER, 4-1/2 IN. DWE 402 61303 NOTE: Apparently in Excellent/Unused Condition. In OEM Packaging/Shipping Cardboard /Boxes.

238 – DEWALT PADDLE SWITCH, SMALL ANGLE GRINDER, 4-1/2 IN. DWE 402 670158 NOTE: Apparently in Excellent/Unused Condition. In OEM Packaging/Shipping Cardboard /Boxes.

239 – DEWALT SMALL ANGLE GRINDER, HEAVY DUTY, 4-1/2 IN. D28402.

240 – LOT 3- DEWALT DRILLS, 3/8 IN. VSR 2- are Model DW106 Type 2 and 1- is Model D21009.

241 – DEWALT DRILL, 1/2 IN. VSR DW235 G, Type 1 Corded.

242 – DEWALT DRILL, 1/2 IN. VSR DC727, Type 1 12 v, with Charger and 3- Extra Batteries.

243 – DEWALT DRILL, 3/8 IN. With 4- 9.6 v XR Batteries.

244 – DEWALT DRILL, 1/2 IN. VSR DC759, Type 1 18 v, XRP with Charger.

245 – DEWALT DRILL, 3/8 IN. 12 v, with Model DW 9118 Charger and Extra Battery.

246 – LOT DEWALT IMPACT DRIVERS, 1/4 IN. DC825, Type 3 18 v, with Battery Charger.

247 – LOT DEWALT IMPACT WRENCH, 3/8 IN. DCF883, Type 2 With 1- Model DCB101 12 v-20 v, and 1- DCB115 Battery Chargers with Extra Battery on Each Charger, All in Molded Plastic Carry/Storage Case.

248 – LOT DEWALT IMPACT DRIVERS, 1/4 IN. DC825, Type 3 18 v with Battery Charger.

249 – LOT DEWALT IMPACT WRENCH, 3/8 IN. DC823, Type 3 18 v, with Model DW9116, 7.2v-18 v Battery Charger, in Molded Plastic Carrying/Storage Case.

250 – LOT DEWALT DRILL, 1/2 IN. VSD DCD 950 Type 2 18 v, with DEWALT Model DW9116, 7.2 v-18 v Charger with Extra Battery.

251 – CUSTOM DESIGNED AND FABRICATED WORK TABLE, STEEL Having Mid- Shelf, 36 -1/2 in. high x 36 in. deep x 8ft. long, having Plywood Top, COLUMBIAN Model D45-M4 Vise.

252 – LOT 2- CUSTOM DESIGNED AND FABRICATED WORK TABLES Having Bottom Shelf 40 in. high x 38 in. deep x 48 in. long, mounted on Castering Wheels. (NOTE: 1- Table contains 19- Spools of 16 gauge, Color Coded Electrical Instrumentation Communication and Lighting Wiring.

253 – CUSTOM DESIGNED AND FABRICATED WORK TABLE, STEEL 35-1.2 in. high x 30-1/2 in. deep x 10 ft. long, All Steel with 4 in. high Back Splash.






254 – LOT 4- STORAGE RACKS Each with Plastic Parts Bins, consisting of but not necessarily limited to: 4- Rack Stands, each 60 in. high x 16 in. deep, x (2- are 59-1/2 in. wide, 1- is 48 in. wide and 1- is 37-1/2 in. wide), having 5- Sloping, Expanded Metal Shelves: 2- have 28- (approx.) Molded Plastic Parts Display Storage Bins; 1- has 25 (approx.); and 1- has 18 (approx.).

255 – LOT 5 (est.)- STORAGE RACKS 3- are 5 ft. high with Plastic Storage Bins; 1-is 3- Bay/Section Storage Shelving, 8 ft. high x 9 ft. long OA with Plastic Storage Bins; 1- is Material Handling Wire Basket containing Plastic Parts Storage Bins.

256 – LOT 6- bays / sections PALLET RACK SHELVING 6- Bays/Sections, Each Section is 12 ft. high x 42 in. deep x 10 ft wide having 3- Shelves, Each Floored with 2 in. x 6 in - 2 in. x 8 in. Wood.

257 – LOT 10 (est.)- ELECTRICAL POWER EXTENSION CORDS With AIR HOSES, 1- is Coiled.

258 – LOT FABRIC CARGO LIFTING STRAPS/SLINGS AND CHAINS 8- (est.); LIFT PRO 3-Leg TOG Chain Fall with Clevis, 7000 lb. Vertical capacity; 2- 3- Leg Swivel Hooks, Chains Cargo Straps. With CHAIN AND LOAD BOOMERS

Consisting of but not necessarily limited to: 12-(approx.) Chain Load Boomers both Over Center and Ratchet, 3- (est.) Chains.

259 – AGENT™ FLAMMABLE LIQUID STORAGE CABINET No. 1068342 30 gal. capacity.

260 – LOT 3 (est.)- U-LINE MOVING BLANKETS.

261 – LOT 5- bays / sections PALLET RACK STORAGE SHELVING 5- Bays/sections, each Section is 10 ft. high x 42 in. deep x 9 ft. long, (1- Section is 12 ft. high ), Each Section having 3- Shelves; are Plywood and 2 in. x 6 in. Flooring.

262 – LOT 2- ACROPRINT TIME CLOCKS With Card Racks.

263 – LOT 15 (approx.)- MAINTENANCE EQUIPMENT FOR FLOOR / SIDEWALK Consisting of but not necessarily limited to: 9- Push Brooms; 1- Snow Shovel; 1- Garden Rake; 3- Dust Pans; 1- Ice Chipper / Scraper.

264 – DEIMCO INC. POWDER COATING BOOTH, 3-K, WALK-IN Consisting of: 1- 8 ft. high x 12 ft. wide x 20 ft. long Panel Section Galvanized Steel Booth, having 1- Power Up-Down Rolled Fabric End Door, having Up-Draft Ventilation System with Filter Cartridges, DEIMCO INC. Control Panel having DWYER® Pressure Gauge and other Controls, 2- Side Positioned, Filtered Forced Air Intake Plenum Chambers.






265 – ITW GEMA POWDER DELIVERY SYSTEM / POWDER COAT GUN Opti Star CG07 (Mfg. 2006) Mounted on Model Optiflex F, 4- Wheel Cart with 5 gal. (approx.) Canister.

266 – ITW GEMA POWDER DELIVERY SYSTEM / POWDER COAT GUN Type PGC1 8105.07812 (Mfg. 1998).

267 – LOT 2- ITW GEMA AND PCF CANISTERS, PORTABLE 10 gal.(est.), Stainless Steel; with 1- Gun, Hoses and Related.

268 – NORTECH POWDER VACUUM, AIR POWERED With 20 gal. (est.) Receiver Barrel.

269 – FREMONT INDUSTRIES, INC. PHOSPHATING CHEMICAL SYSTEM System 1024 Consisting of HOTSY Steam Unit, FRIPLEX Pressure Pump powered by Electric Motor, Controls, Exhaust Piping and Related Support Items with Hose and Wash Wand.

270 – WISCONSIN OVEN CORP. OVEN, FORCED AIR, NATURAL GAS FIRED EWN-818-8G 06161 9909 500° F, 850,000 BTU/hr.; 2- HONEYWELL Fluid Power Gas Valves and Related Safety Modules, 10 ft. high x 10 ft. wide x 18 ft. long (approx. OAD), Double Hinged Doors on both Ends.

271 – WASH BOOTH Metal Interior and Exterior Skin, 9 ft. 8 in. high x 18 ft. wide x 25 ft. long (approx. OAD) having 2- 9 ft. high x 10 ft. wide End Openings, 1- of these with 2- Sliding, Top Rail Track Enclosure Doors; 1- High Pressure, 1-Steam Wash Wand, 50 ft. x 1 in. dia. (est.) Water Hose, 4- Wall Mounted 7 ft. long (est.) Florescent Light Fixtures.

272 – LOT 4- CUSTOM DESIGNED AND FABRICATED POWDER COATING, MATERIAL HANDLING CARTS Consisting of 1- Cart, Steel, 7 ft. 2 in. high x 5 ft. wide x 12 ft. 5 in. long mounted on 4- Wheels; 3- Carts Steel, 7 ft. 2 in. high x 5 ft. wide x 8 ft. 6 in. long mounted on 4- Wheels.

273 – LOT CUSTOM DESIGNED AND FABRICATED POWDER COATING S-HOOK MATERIAL HANGERS For suspending Work-in-Progress, Assorted Sizes from 30 in. long to 6 in. long in 4 Intermediate Length with Custom Designed and Fabricated Cart on Wheels.

274 – LOT 24 (approx.)- BOXES POWDER COATING, POLYESTER FREE Consisting of but not necessarily limited to: 12- Boxes SHERMAN WILLIAMS, 50 lbs. per Box, of RHS8-20004, Beige; DYS8-20008, Yellow; RBS 8-00002, Jet Black; EAS6-C00000, Gray Primer; DYSB-20008-C50, Caterpillar Yellow; DIAMOND VOGEL Peridium® EH -3352 Yellow; EH-3392 Construction Yellow; EH-0322 Tan Primer and Related.






275 – LOT PERSONAL SAFETY EQUIPMENT Consisting of but not necessarily limited to: 2- MOLDEX® 8000 Series Respirator Face Pieces; 1- Box MOLDEX® 8020 Filter Retainer; 2- Boxes MOLDEX® Replaceable Cartridges; 1- Box 3M 7253 Gas Cartridge; 1- Box 3M 7200S Dual Cartridge; 2- Boxes AMERICAN ALL SAFE Monogoggle Protective Eyewear; and Related.

POWDER COATING OFFICE / SUPPLY ROOM 276 – UNLOTTED CONTENTS OF ROOM

Consisting of but not necessarily limited to: Double Pedestal Desk, 30 in. x 60 in., Metal; HON, 4- Drawer, Letter, Vertical File Cabinet; Storage Cabinet, 84 in. high (approx.) Double Hinged Front Doors; STEELMASTER 2- Drawer Card File Cabinet.

277 – LOT 3- GOODYEAR TIRES, MOUNTED 38 x 20.00-16.1NHS 8 STG TL, STG398 (NOTE: 2- are New/Unused).



280 – LOT 2- HANKOOK TIRES, MOUNTED P255/50R20 104H Tires mounted on European Agricultural Wheels; (Appear to be New/Unused).

281 – COATS INFLATE-AIR TIRE CHANGER 20-20A Super Star 57149 With WORKSHOP Tool Cabinet and 3- Drawers and Top Tray Tool Box.

282 – LOT MOLDED PLASTIC PARTS STORAGE / DISPLAY BINS On Pallet and in Box.

283 – LOT 6- MATERIAL HANDLING WIRE BASKETS, STACKABLE 1- is Portable on Castering Wheels.

284 – LOT 3- bays / sections PALLET RACK SHELVING 3- Bays/Sections, 10 ft. high x 34 in. deep x 8 ft. long having 3- Shelves with Plywood Flooring.

285 – LOT CM & JET CHAIN HOISTS AND RELATED Consisting of but not necessarily limited to: 1- CM Model WL, 1- Ton Electric Motor Geared Chain Hoist s/n LW-169-P; 1- JET Model L-90, 1/2 Ton Manual Chain Hoist; 1- Coil of Electrical Power Cord, Miscellaneous Parts; 1- Steel Storage Rack.

LOTS 286-289 UNASSIGNED






OFFICE FURNITURE, FIXTURES AND EQUIPMENT

RECEPTION AREA 290 – LOT OFFICE FURNITURE AND MODULAR RECEPTION UNIT

1- 8 ft. Folding Leg Table, 2- Side Arm Chairs; 2- Section Wood Grain Formica Top.

291 – LOT ROOM DIVIDER, OFFICE CUBICAL 4- Panel/Section Modular Room Divider; 5- Sections of Modular Wall Panels, 4- Cantilevered Steel Shelves; With EAST END, ACCOUNTING / IT - LOCATION

6- Sections, 74 in. high x 48 in. wide (approx.), 2- Sections having 20 in. high (approx.) Clear Glass Panel, 6- (approx.) Cantilevered Shelves; 1- Section, 62 in. high x 48 in. wide (approx.) and 5- Sections (approx.) 62 in. high x 24 in. wide (approx.);

With CENTER ROOM/AREA-LOCATION 2- Sections, 74 in. long x 48 in. wide (approx.), 1- Section having Clear Glass Panel;

With CENTER CONFERENCE ROOM-WEST Area 1: 5- Sections, 74 in. x 48 in. (approx.) having 8-(approx.) Cantilevered Steel Book Shelves and Partition Divider Plates; Area 2: 2- Sections 74 in. x 48 in. (approx.) having 1- Cantilevered Steel Book Shelf and related Items.

NEXT OFFICE 292 – LOT OFFICE FURNITURE AND EQUIPMENT

1- Double Pedestal Desk; 1- HON 2- Drawer Lateral File Cabinet; 1- TENNESCO 2- Drawer Lateral File Cabinet; 1- Floor Fan, Pedestal Type; Chair Floor Mat.

293 – LOT DELL TOWER CASE COMPUTER OptiPlex 210L With DELL Monitor, Logitech Keyboard and Mouse; With HEWLETT PACKARD PRINTER LaserJet 1020.

CONFERENCE ROOM 294 – LOT OFFICE FURNITURE FIXTURES AND EQUIPMENT

2- Folding Leg Tables, each 6 ft. long; WHIRLPOOL Microwave Oven; BLACK & DECKER Versa Brew™ Plus Coffee Maker.

295 – LOT FURNITURE 2- 8 ft. Long and 2- 5 ft. 6 in. long Tables having Wood Grain Plastic Laminate Tops; 20- (approx.) Stacking Chairs; 1- 2- Shelf Book Case; 1- Wood 2- Drawer Cabinet; (NOTE: Tables are arranged as a Conference Table).

296 – SYMPHONIC TV MONITOR AND VHS With Wood Stand and Cabinet.






UPSTAIRS

WEST OFFICE 297 – LOT CONTENTS OF ROOM

Consisting of but not necessarily limited to: L-Shaped Double Pedestal Desk; 6 ft. tall Bookcase/Hutch; Printer Stand; 2- HON 4- Drawer Letter, Locking, Vertical File Cabinets; Side Table; Swivel Executive Chair; 2- Side Arm Chairs; Desk Chair Floor Mat; 3 ft. x 4 ft. (est.) Dry Marker Board.

NEXT OFFICE -EAST 298 – LOT FURNITURE

30 in. x 60 in. Double Pedestal Desk, Steel; 3- Shelf, Wood Bookcase; HON 4- Drawer, Letter, Locking, Vertical File Cabinet; /Dry Marker/Cork Board, Executive Swivel Chair; Desk Chair Floor Mat.

299 – ASUS MONITOR VH196T.

2ND NEXT OFFICE - EAST

ENGINEERING DESIGN / DRAFTING 300 – LOT CONTENTS OF ROOM

Consisting of but not necessarily limited to: Computer Work Station having 90° Corner Segment and Left and Right Hand Units; 2- 3- Drawer File Pedestals; 1- 4- Drawer Vertical File Cabinet; Executive Swivel Chair; Desk Chair Floor Mat; Double Pedestal Desk with L-Return, Executive Swivel Chair; Desk Chair Floor Mat; Bookcase/ Curio Unit, Wood, 3- Shelf; Dry Marker Board; HEWLETT PACKARD Design Jet 90 Plotter; NEC Multi-Sync LCD1760V Monitor.

301 – LOT MAYLINE, SAFECO FILE CABINETS AND CREDENZA 3- are MAYLINE C-File Drawing File Cabinets, 2- are 10- Drawer and 1- is 7- Drawer; 2- SAFECO Drawing File Cabinets, Each having 5- Drawers; 1- SAFE CABINET LABORATORIES, Fire Proof, 4- Drawer, Locking, Vertical, File Cabinet.; 1- Credenza, Steel.

IT / FILE ROOM

NEXT OFFICE - EAST 302 – LOT OFFICE FURNITURE AND CONSUMABLES

30 in. x 60 in. Double Pedestal Desk, Swivel Chair, Supply Closet Contents having Miscellaneous Office Consumables.






CONFERENCE ROOM 303 – LOT HON, HOOVER OFFICE FURNITURE

Double Pedestal Desk having L-Return; Executive Swivel Chair; Desk Chair Mat; HON 3- Drawer, Locking, Vertical, File Cabinet; 3- Shelf Printer Cabinet; 8 ft. long Conference Table, Boat Shaped; 6- Chairs, Swivel; HOOVER 12- amp Wide Path, Vertical Vacuum cleaner.

304 – KYOCERA COPY MACHINE KM-2050 AGJ3075359 (Mfg. 04/2006).

305 – KYOCERA MULTIFUNCTION COLOR LASER PRINTER Ecosys FS-C5020N APD 6104888.

306 – DART BLUEPRINT MACHINE/ PRINTER Diazit®.

307 – DELL MID-TOWER CASE COMPUTER OptiPlex 3010 Windows 7 OS; DELL Monitor, 1- DELL and HEWLETT PACKARD Keyboards, 2- DELL Mice.

308 – EPSON COLOR INKJET DURA BRITE INK Stylus C66.

309 – DELL PRINTER: COPY/ SCAN/ PHOTO V313.

310 – LOT 3- COMPUTER MONITORS 1- AOC; 1- NEC Flat Screen and 1- DELL CRT Monitor.

311 – BROTHER MULTIFUNCTION MACHINE Intelli-FAX 2820.

312 – GBC BINDING PUNCH PRESS Image-Maker 2000.

313 – LOT COMPUTER RELATED PERIPHERALS Consisting of but not necessarily limited to: 2- Boxes/Tubs containing 3- Keyboards, Mice, Power Strips, Keyboard Shelf; Foot Rest and Others.

OFFICE 2ND FROM EAST-MOST / EAST-MOST 314 – LOT OFFICE FURNITURE AND FIXTURES

Double Pedestal Desk with L-Return, Steel; BROYHILL Executive Chair, Swivel; Desk Chair Mat; Straight Side Arm Chair; Dry Marker Board; With LOT OFFICE FURNITURE AND FIXTURES

Double Pedestal Desk; Work Table, 58 in. wide, having Cantilevered Top Work Surface; HON 2- Drawer, Letter, Vertical File Cabinet; Swivel Chair; Desk Chair Mat; 2- Side Arm Chairs; Dry Marker Board.

315 – OKI LASER PRINTER, COLOR C3400.

316 – HEWLETT PACKARD LASER JET PRINTER, COLOR Enterprise M553.

Documents

REAL ESTATE & EQUIPMENT AUCTION - MaasCompanies · 2018-05-18 · 32 – CLARK FORK LIFT TRUCK, LPG ENGINE GCX25, Type LP GX230-0296-9085K0F (Mfg. 1992) 4,150 lb. capacity, 3- Stage