Readme for Cisco Prime Network 3.10 Device Package 1301

Date: January 24th, 2013

Table of Contents

1 Contents of Cisco Prime Network 3.10 Device Package 1301 ...................................................... 2

1.1 New Software/Feature for Cisco Network Elements ............................................................ 2

1.2 New Support for Device Package Mechanism ...................................................................... 4

1.3 New Reduced Polling (EVNE) Support ................................................................................... 4

1.4 New Support for Cisco ANA Configuration and Image Management ................................... 4

2 Installing Cisco Prime Network 3.10 Device Package 1301 ........................................................... 5

3 List of Latest Driver Files on Cisco Prime Network 3.10 server post installation of DP 1301 ....... 5

4 Resolved Defects ........................................................................................................................... 7

4.1 Bug Resolutions That Require Cisco ANA Patches .............................................................. 10

5 Open Bugs ................................................................................................................................... 10

5.1 Device-Specific Open Bugs .................................................................................................. 10

5.2 Cisco ANA-Specific Open Defects ........................................................................................ 11

6 Related Documentation .............................................................................................................. 11

7 Appendix A .................................................................................................................................. 13

Devices Supported in Cisco-Others-v4.0.0.0.jar Supported Device ............................................ 13

8 Appendix B .................................................................................................................................. 13

Specifying IP Addresses for which SNMP Trap and Syslog Events .............................................. 13

9 Appendix C .................................................................................................................................. 15

Configuration Task for Cisco 7600 for Modeling only iBGP Routes ................................................ 15

10 Appendix D .............................................................................................................................. 15

Configuration Task for UCS VNE Modeling ..................................................................................... 15

11 Appendix E ............................................................................................................................... 16

Configuration Task for ASR 901 for seeing the Soft Property ......................................................... 16

12 Appendix F ............................................................................................................................... 16

Configuration Task for ASR 5K VNE Modeling ................................................................................. 16

13 Appendix G .............................................................................................................................. 17

Configuration Task for ASR 9000 for Modeling only iBGP Routes .................................................. 17

1 Contents of Cisco Prime Network 3.10 Device Package

1301 Cisco Prime Network 3.10 Device Package (DP) 1301 provides new and enhanced device support and bug fixes for Cisco VNEs. The new support and bug fixes are described in this Readme. Note:

Cisco Prime Network 3.10 DP 1301 contains all of the support provided by the Device

packages released post Cisco Prime Network 3.10

Install the latest Cisco Prime Network 3.10 point patches / service patches on since some of

the bug fixes in the VNE Drivers are dependent on these patches. ( refer to sec 4.1 of

readme me for details )

At any point in time, to get the most up-to-date device support, install the most recent DP that is available from Cisco.com. To verify whether you have latest VNE driver files, refer to Section 3.

Pl. refer to Appendix F for modeling iBGP only in Cisco 7600

Pl. refer to Appendix G for modeling iBGP only in ASR 9000

1.1 New Software/Feature for Cisco Network Elements

This DP provides the following new NE support. Note that jar files are cumulative; a jar that

is revised for a newer DP contains all of the support that was contained in the previous

version of the jar. (For example, CiscoPrimeNetwork-3.10-DP1301.tar contains all of the

support that was delivered from CiscoPrimeNetwork-3.10-DP0.tar)

The following table describes the new NE support provided in Cisco Prime Network 3.10 DP 1301 (CiscoPrimeNetwork-3.10-DP1301.tar) .

Device Series Software New NE / Power supply/Modules

supported Feature/ Technologies Quality Enhancement

Name and Version of Jar File Containing the s/w Support

ASR 1000 XE 3.7.1

Cisco-ASR10xx-v4.0.0.0.jar

ASR 9000 XR 4.2.3 XR 4.3.0

New Modules

A9K-MPA-1X40GE

SFP-10G-ZR

Trap: RF-swap-notification-trap-V2* Feature:

Satellite support **

Ironman Cluster support

Cisco-ASR90xx-v4.0.0.0.jar

ASR 901 15.2(2r)SNH1

New NE:

A901-6CZ-F-D

A901-6CZ-FT-A

A901-6CZ-FT-D

A901-6CZ-F-A

Technology:

LLDP

EVC SVI Services

Cisco-MWR29xx-v4.0.0.0.jar

ASR 903 15.2(4)S1a

15.3(1)S

New Module:

ONS-SI-622-I1

ONS-SI-622-SR-MM

ONS-SI-622-L2

ONS-SI-622-L1

Cisco-ASR903-v4.0.0.0.jar

ASR 5000 Star-OS 14.0MR

Cisco-ASR5000-v4.0.0.0.jar

ASA 5500 8.4(3) Technology Port Channel

Cisco-asa55xx-v4.0.0.0.jar

Cisco 6500

Syslog:

Dlci Up

Dlci Down

Cisco-Commons-v4.0.0.0.jar

Cisco 7600

New Module

SPA-4XOC3-POS-V2

SPA-4XOC12-POS

ES+HD ES+T 8TG

SPA-4XT-SERIAL

Cisco-76xx_65xxIOS-v4.0.0.0.jar

CRS XR 4.2.3

XR 4.2.4

XR 4.3.0

New Module

4-40GE-L/OTN

1-100GE-DWDM/C

Trap: RF-swap-notification-trap-V2*

Cisco-CRS-v4.0.0.0.jar

CPT 9.5.1.1

9.5.1.2

Cisco-CPT-v4.0.0.0.jar

GSR XR XR 4.2.3

XR 4.2.4

XR 4.3.0

Technology: HSRP v2

Cisco-12xxx-v4.0.0.0.jar

MWR 2941 15.1(1)MR05

15.1(3)MR

Syslog Ticketable support for ENVM-1-OVERTEMP

Cisco-MWR29xx-v4.0.0.0.jar

ME 3600X 15.1(2)EY2

15.3(1)S

Cisco-ME36XX-ME38XX-v4.0.0.0.jar

ME 3800X 15.1(2)EY2

15.3(1)S

Cisco-ME36XX-ME38XX-v4.0.0.0.jar

Nexus 1000 4.2(1)SV1(5.1a)

Cisco-Nexus10xx-v4.0.0.0.jar

Nexus 5000 New Module: N2K-C2248TP-E-1GE

Technology: FCOE Interfaces : ID and WWN

Cisco-Nexus50xx-v4.0.0.0.jar

Nexus 7000 NX-OS 6.1.2

New Module

N7K-SUP2E

N7K-M224XP-23L

N2K-C2248TP-E-1GE

Registration Optimization:

PortLayer1

OSPF

VRF

Cisco-Nexus70xx-v4.0.0.0.jar

Nexus 2000

New NE

N2K-C2248TP-E-1GE***

Cisco-Nexus70xx-v4.0.0.0.jar

UCS

Technology:

Blade Interfaces

Fabric Interconnect Fiber Channel Ports

Fabric Interconnect: IP Address and Memory

Cisco-ucs-v4.0.0.0.jar

* cisco-RF-swap-notification-trap-V2(1.3.6.1.4.1.9.9.176.2.0.1) “cisco RF status – activeUnitFailed” has been

changed as Ticket able and also changed severity as “Minor”

** Satellite configurations are expected to be possible with ASR 901 and ASR 903 devices that are expected to

appear and behave like satellite devices that are connected to and managed by a host ASR 9000 devices.

*** Support for N2K-C2248TP-E-1GE connected to Nexus 7K

Consolidated list of devices, software, and modules supported post Prime Network 3.10 releases can be found here – Cisco

Prime Network Reference Guide – VNE Addendum, 3.10

1.2 New Support for Device Package Mechanism

This DP provides support for the Device Package update mechanism for the following devices. (This means that these devices can support VNE updates from the Cisco ANA Software Download site on Cisco.com.)

Device Series DP Support Added in Jar File Name and Version

None in the release

1.3 New Reduced Polling (EVNE) Support

This DP provides reduced polling (event-based polling) support for the following devices. After installing the DP, when you create a VNE for these device families using the Cisco ANA Manage GUI client, you will be able to choose reduced polling for these VNEs. (For information on reduced polling, see the Cisco Active Network Abstraction Administrator Guide.

Device Series EVNE Support Added in Jar File Name and Version

Nexus 70xx ANA 3.10 DP1 Cisco-Nexus70xx-v2.1.0.0.jar

Note: Pl. refer to Appendix B for Reduced VNE Polling support for Nexus 7000

1.4 New Support for Cisco ANA Configuration and Image Management

This DP provides the following new support for Cisco ANA Configuration and Image Management. For bug fixes, see Section 3. Device Series

Software Release

Software Version

Functionality Supported Device package jar file

Device Package release

NA

2 Installing Cisco Prime Network 3.10 Device Package 1301 For instructions on how to install (or uninstall) the DP, see the appropriate DP installation guide for

your Cisco ANA release. The guides are available from two places:

Go to Cisco Prime Network 3.10 Software Download site on Cisco.com (click on hyperlink)

and navigate to Cisco Prime Network 3.10 > Cisco Prime Network VNE Drivers. Choose the

latest Device Package release available on Cisco.com

For a complete list of Cisco Prime Network 3.10 documentation, see:

Cisco Prime Network 3.10 Documentation

3 List of Latest Driver Files on Cisco Prime Network 3.10

server post installation of DP 1301 The following list reflects the latest versions of VNE driver files for Cisco devices. This includes the

drivers that were provided with the base release of Cisco Prime Network 3.10 (without any DPs

installed). To check if the system has the latest driver files installed, log into the gateway server

and compare the contents of your $ANAHOME/Main/drivers directory with the list below.

Note: This table only lists the latest Cisco VNE driver files. Your directory may also contain third-

party VNE drivers if you have installed any third-party VNE DPs.

S. No Device Series Jar File name DP version in which the jar file was changed

1 Cisco-CPT Cisco-CPT-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

2 Cisco-ASR90xx Cisco-ASR90xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

3 Cisco-CRS Cisco-CRS-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

4 Cisco-12xxx Cisco-12xxx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

5 Cisco-Commons Cisco-Commons-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

6 Cisco-IOX-Commons Cisco-IOX-Commons-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

7 Cisco-MWR29xx Cisco-MWR29xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

8 Cisco-ASR903 Cisco-ASR903-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

9 Cisco-Nexus10xx Cisco-Nexus10xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

10 Cisco-Nexus30xx Cisco-Nexus30xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

11 Cisco-Nexus50xx Cisco-Nexus50xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

12 Cisco-Nexus70xx Cisco-Nexus70xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

13 Cisco-UCS Cisco-ucs-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

14 Cisco-ME36XX-ME38XX Cisco-ME36XX-ME38XX-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

15 Mib2 Mib2-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

16 Cisco-NCCM_Core Cisco-NCCM_Core-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

17 Cisco-NCCM_IOX Cisco-NCCM_IOX-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

18 Cisco-ASR10xx Cisco-ASR10xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

19 Cisco-Modules Cisco-Modules-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

20 Cisco-Others * Cisco-Others-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

21 Cisco-70xx cisco-70xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

22 Cisco-76xx_65xxIOS Cisco-76xx_65xxIOS-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

23 Cisco-UBR100xx Cisco-UBR100xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

24 Cisco-3400ME Cisco-3400ME-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

25 Cisco-3750ME Cisco-3750ME-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

26 Cisco-ISR19xx Cisco-ISR19xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

27 Cisco-45xx Cisco-45xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

28 Cisco-ISR29xx Cisco-ISR29xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

29 Cisco-49xx Cisco-49xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

30 Cisco-ASA5000 Cisco-asa55xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

31 Cisco-ISR39xx Cisco-ISR39xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

32 Cisco-UBR72xx Cisco-UBR72xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

33 Cisco-ACE4710 Cisco-ACE4710-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

34 Cisco-ASR5000 Cisco-ASR5000-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

35 Generic-ICMP Generic-ICMP-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

36 Cisco-100xx Cisco-100xx-v4.0.0.0.jar CiscoPrimeNetwork-3.10-DP1301

*See Appendix A.

4 Resolved Defects This section lists all bugs that are resolved in this DP. Because bug fixes are cumulative and may be

inherited from previous DPs, this section also lists which DP provided the resolution.

The following bugs are resolved in Prime Network 3.10 DP 1301

S No Defect Platform Headline

1 CSCud37211 Cpt link missing, cdp table on CPT device missing local port

2 CSCub78748 Crs EVNE functionality is not working properly for logical Inv CRS device

3 CSCub82417 Cisco 7600 DWDM events dropped as generic in PN 3.10

4 CSCuc73668 All Cisco Ios

Devices BGP Neighbour table is not getting modeled for IOS devices

5 CSCud32761 All Cisco Devices PN:STP mode not getting updated with reduced polling for IOS device

6 CSCtz57805 Asr 9000 ANA37313/DP13 - ASR9K BFD sessions modelled partially

7 CSCud34066 Asr 901 PN:Port-channel addition/removal and MPLSTE issue for ASR901 as EVNE

8 CSCud40225 Cisco 7600 PN:MPLS TP enabled links not getting added/removed as EVNE -7600

9 CSCua84644 Cisco 7600 CFM RemoteMaintenanceEndPoints are not modeled for 7600

10 CSCub15751 Vne-Fw some times accounting and authentication conf are not populating

11 CSCub20825 Cisco 7600 evil twin dc exception- POS port missing in 7600 device

12 CSCub33493 Vne-Nexus-5k ANA373 PP3/DP16 Nex7K no card down/up seen for N7K-C7010-FAB-2 in

EVNE

13 CSCub35915 Nccm-Xr CCM config backup job fails when used sftp protocol on ipv6 device

14 CSCub37275 Cisco 7600 gigabit port missing in 7604 modeling

15 CSCub45650 Asr 9000 Incorrect Chassis Disconnect ticket on Chassis Disconnect

16 CSCud42340 Asr 9000 Multiple VRRP group are not populating in VRRP group inventory for ASR9k

17 CSCub50676 Vne-Nexus-5k Two VPC Port Channel are missing under VPC domain for nexus5k

18 CSCub55128 Vne-Nexus LAG down ticket not raised in N7K for Port Channel shut down

19 CSCud44619 Asr 9000 AVM Crash due to huge number of VRF route entries

20 CSCud44784 Cpt Add support for VPLS in CPT

21 CSCud52593 Cisco 7600 PN: Cisco HSRP state none active not expedite HSRP

22 CSCub58324 Tech-Access vne failed to module when selecting default scheme

23 CSCub62922 Asr 9000 Missing local interface on PW of ASR9K

24 CSCud52621 Cisco-Iox-

Common Missing fault category details for DWDM,IPv6,Sonet related syslogs

25 CSCub64904 Actvscripts-Infra Only VLSM is supported in Command builder.

26 CSCub67488 Vne-Nexus-5k One port channel is populating several times in VPC domain for Nexus5K

27 CSCub69885 All Cisco Devices EVNE will not apply configuration until \"poll now\" is pressed

28 CSCub69886 Vne-Mwr-29xx Non Optimized cmds are sent to IOS devices for PW deletion

29 CSCud52807 Vne-Asr-903 EVNE - LSP role is not updatde after lockout

30 CSCud52874 All Cisco Devices CiscoInvestigator Loader prints false masseges to log

31 CSCub71717 Actvscripts-Infra Existing Vrf was not able associate with router bgp.

32 CSCub73685 Tech-Access Aggregation Group 66 missing - Evil Twin DC RuntimeException

33 CSCub73863 Asr 9000 ASR9K Power Module PID missing

34 CSCud53810 Nccm Squeeze timed-out during CCM Clear Flash on ASR901

35 CSCud56263 Vne-Nexus-1k Nexus 1010 is not modeling threw ssh in Prime Network 3.10

36 CSCub74233 Vne-Asr-5k Error in mobility by creating same name with different length

37 CSCud58694 Asr 9000 VRRP Group config Invalid Virtual IP Address populating in ASR 9k

38 CSCud63487 Vne-Nexus-5k ucs c series rack mount server modeling wrong

39 CSCud63521 Vne-Nexus LACP topology modeling fails for Nexus 7k

40 CSCud69280 All Cisco Devices redundant data in troubleshooting field for PPM events

41 CSCud70706 Asr 9000 PN re sync MAC address table even when no bridge domain configured.

42 CSCud71852 Alarm-Infra PN: OSPF neighbor up syslog has missing location ME

43 CSCud73873 Vne-Ucs 3.10:PN Inventory gets Updated 14 Mins after XMP refresh completion

44 CSCud75736 Xr 12000 12k VNE in Unsynchronized State

45 CSCub77582 Tech-Datacenter Missing UUID for Host and VM in inventory result

46 CSCud76378 Asr 9000 Wrong Slot Number for 903 and 901 Satellite Modules

47 CSCud79095 Vne-Crs interface is modeled as T3 instead of Serial

48 CSCud81792 Asr 9000 ControlEthernet0/RSPx/CPUx/S0/x I/Fs are showing up under RSP0/1

49 CSCud82772 Vne-72xx CDP is not modeling for 7206VXR is running with IOS Version 12.3(21)

50 CSCub79441 Vne-Asr-5k APN QCI Downlink Traffic Policing Violation Action is shown wrong

51 CSCub82312 Vne-Me-34xx missing bridge table on 3400ME and 3750ME

52 CSCud83935 Asr 9000 Filtering eBGP & iBGP entries for 76xx & ASR 9K

53 CSCud97595 All Cisco Devices bgp neighbor entry modeling has changed in the latest DP

54 CSCue00084 Vne-Me-34xx no MPIDs under CFM (no local nor remote)

55 CSCub84798 Actvscripts-Infra Wrong validation message is thrown in Route Access list

56 CSCub87024 All Cisco Devices PN: specific Bgp Link down event not clean

57 CSCub87099 Actvscripts-Infra while creating EGTP without a gtpu configured activation sc error

58 CSCub88850 Actvscripts-Infra SGW script should not show accounting mode-no change

59 CSCub89262 Tech-Physical Mistake in physical inventory imo's

60 CSCub91736 Alarm-Infra Fault is not categorised properly

61 CSCub94199 Tech-Mcast Mis-Match in IGMP data between device and ANA

62 CSCub96360 Cisco 7600 VNE Customization : MPLS-TP tech is not modelling in Userdefined Scheme.

63 CSCuc10678 Cisco-Iox-

Common Customisation Missing biridge container

64 CSCuc10890 Vne-Fw Customizaton: AVM Restart reusult in wrong scheme on VNE

65 CSCuc10962 Actvscripts-Infra Major attributes missing in create network pdp context

66 CSCuc11012 Tech-Access Customization: Access profile do come by default in Customized Scheme.

67 CSCuc13097 Cisco 7600 Customization: IMA Groups are modelling in EMS Scheme in Cisco76xx

68 CSCue05845 Asr 9000 ASR901 Satellite Wrong Chassis ID

69 CSCue06071 Asr 9000 PN: ASR9K - IPv6 ACL does not model IP protocol

70 CSCue13576 Vne-Asa-558x Power supply and fan sensors are modeling as slots-ASA

71 CSCue17836 All Cisco Devices PN: IPv6 Routing Table not modelling in ANA GUI

72 CSCuc21786 Vne-Asr-5k IP Pools values are not reflected in ANA

73 CSCuc21822 Actvscripts-Infra Error is seen while executing the Modify VRF Script.

74 CSCuc26301 Vne-Asr-5k Configured mode doesnt get updated in ANA for credit control group

75 CSCuc39142 All Cisco Devices Out interface of TE-Tunnels missing after device reload

76 CSCuc44359 Asr 9000 PN: The mismatch bewteen entries of Routing Entity and xml output.

77 CSCuc47793 Xr 12000 GSRXR 4.1.1 modelling as regular VNE eventhough evne is selected

78 CSCuc53131 Vne-Mwr-29xx PW interface creation is not updating for MWR in PN310

79 CSCuc57352 Vne-Ios-Cat6k catalyst 6500 are being queried 150 times about the native vlan

80 CSCuc65265 Asr 9000 'interfaces' regitration spikes Cisco ASR9k should be optimized.

81 CSCuc65310 Asr 9000 Registration for Megatron device can be optimized to reduce CPU spike.

82 CSCuc65460 Equip-Autodisc EDDP:FC ports for Nexus 5K are not modeling in Auto discovery

83 CSCuc71849 Vne-Infra NullPointerException in OspfInterfacePHLoader class

84 CSCuc73111 Cisco 7600 More optimized cmd can be sent for PW enhancement

85 CSCuc73857 Cisco-Iox-

Common Not all VSI are modelling in XR

86 CSCuc73922 Asr 9000 all SyncE properties model as UNKNOWN on ASR9000

87 CSCuc76082 Ios-Logical-Infra CFM parser need to be handled for etherchannel

88 CSCuc77359 Vne-Asr-903 Clock PTP Service not poplated or has wrong PTP State for ASR903/901

89 CSCuc81181 Vne-Me-38xx PN: Unable to upgrade 3800ME/3600ME image

90 CSCuc85391 Tech-Access Customization:ISIS is not modeling if enabled alone in Customized Scheme

91 CSCuc85484 Vne-Asr-5k peer ip address for ipv6 is not reflecting in details

92 CSCuc86976 Asr 9000 ANA 3.8 : ClassCastException in modeling ASR9k

93 CSCuc87789 Asr 9000 Reserved Address not getting modelled in IP Pool Entries for ASR9K

94 CSCuc87804 Cpt nvRAMSize not modelling for CPT when there are Active & Standby NGXP's

95 CSCuc88068 Asr 9000 Issue in modeling of ASR9K Flash Files Systems in Product Scheme

96 CSCuc90153 Equip-Autodisc Auto-discovery Service alarm needs to be supported

97 CSCuc90543 Vne-Nexus Nexus port admin status modeling incorrect for Nx-OS 6.1(1)

98 CSCuc92314 Vne-Me-38xx PN: IPv6 Routing Table tab does not exists under ME3800 Routing Entity c

99 CSCud00053 Equip-Autodisc EDDP: DWDM container not shown for unsupported module

100 CSCud00260 Equip-Autodisc EDDP:HundredGigE port is not modeling for unsupported module

101 CSCud01942 Vne-Asr-1k PN 3.9 :EVNE functionality not working for all types of tunnels like 6rd

102 CSCud05074 Equip-Autodisc EDDP:unsupportedmodule was auto discovered alarm is not generated forCPT

103 CSCud05474 Vne-Nexus Poll now is not working for some technologies in nexus 7000

104 CSCud06747 Vne-Ucs For xmp events same type is there for all subtypes.

105 CSCud07691 Vne-Nexus VRF Routing Table not modeling for Nexus 7K apart from Management VRF

106 CSCud08757 Asr 9000 MPLS TP, working LSP modeled with default IN/OUT lable

107 CSCud09202 Cisco-Iox-

Common PN: GetPseudowireKeywithTunnelIndex.getKey failed parse long number

108 CSCud09395 Nccm Copy startup-config to running-config will not work for CPT

109 CSCud09398 Vne-Asr-901 Pseudowire is not modelling for ASR901

110 CSCud09660 Vne-Cat-29xx PN Catalist 2960 48TCL getting java.lang.NullPointerException at AVM.out

111 CSCud12133 Vne-Asr-1k PN 3.9-IPSEC tunnel removal issue as EVNE and poll now not working

112 CSCud14066 Vne-Asr-901 PN 3.9 Bridge domain for ASR901 not working with reduced polling

113 CSCud14121 Vne-Nexus-3k Events for Port up/down not working when used Reduced Polling

114 CSCud14616 Asr 9000 ASR9K Line Card Out tickets are not getting cleared

115 CSCud15666 Vne-Asr-901 VRFRoutingTarget and LAG registration can be optimized to reduce device

116 CSCud17510 Vne-Crs CRS: MLPPP is not modeled

117 CSCud19442 Vne-Ios-Cat6k Serial number and device series missing for 6500-vss

118 CSCud19634 Vne-Ucs UCS - serial number is missing for Fan and powersupply modules

119 CSCud19872 Asr 9000 Wrong location of syslog event when I/F is bundle

120 CSCud19889 Asr 9000 illegal question on ANA

121 CSCud22054 Vne-Ucs UCS - Fan detials are missing under FI

122 CSCud25096 Cisco-Iox-

Common Poor handling of error conditions in CiscoRouterIOXCPUUtilizationParser

123 CSCud28774 Cisco-Iox-

Common VRRP is modeling in customized scheme even though disabled in XR

124 CSCud28838 Alarm-Infra BGP link down events are not getting generated

125 CSCud29020 Cisco 7600 PN:EVC under Ethernet LMI not removed as EVNE

Note: For information regarding the support provided in previous DPs, refer to the respective DP Readme files. Links are provided in Section 6.

4.1 Bug Resolutions That Require Cisco ANA Patches

The following bug resolutions are contained in this DP. However, to get the complete bug fix you

must also install the indicated version (or later revision) of the Cisco ANA patch. The following table

lists these bugs along with the required ANA patch, and the ANA bug identifier.

To obtain any ANA patches, contact your Cisco representative.

Identifier Platform Headline ANA Release in which it is the dependent ANA bug is

fixed Resolved in

5 Open Bugs

5.1 Device-Specific Open Bugs

This sections lists the bugs on the devices because of which some features relating to VNE might

not work.

Sno Bug ID Platfor

m Description Impact

Workaround

5.2 Cisco ANA-Specific Open Defects

S no Defect ID Description

1 CSCud97454 Unsupported Modules forASR903, configured as ASR9K Satellite

2 CSCud07414 PN: OSPF Neighbor Down ticket is not getting clean

3 CSCue12898 ASR 901 Chassis Disconnect ticket is not cleared

4 CSCud19034 Sub interfaces on Havoc Port missing in ANA310 and ANA311

5 CSCud09546 Syslogs are not processed in case of OIR in ASR9000

6 Related Documentation

The following documents provide information that is specific to DPs.

Document Provides the Following Information on DPs Cisco Prime Network 3.10 Release Notes

• New features, enhancements, and device support.

• Important notes to be aware of before using this release of the product.

• Known open bugs in Prime Network 3.10, resolved bugs.

Cisco Prime Network 3.10 Quick Start Guide

• Planning and installing Prime Network 3.10, and post-installation tasks.

• Applies to fresh installations with 100 devices or less, and without gateway high availability.

Cisco Prime Network 3.10 Installation Guide

• Installing and upgrading to Prime Network 3.10, including installation of gateways (with no gateway high availability), units, and clients.

• Applies to all deployments of Prime Network that do not have gateway high availability.

Cisco Prime Network 3.10 Gateway High Availability Guide

• Installing and managing Prime Network 3.10 with gateway high availability provided by Red Hat Cluster Suite (RHCS) and Oracle Active Data Guard (ADG).

• Applies to all deployments of Prime Network with an embedded database.

Cisco Prime Network 3.10 User Guide

• Introduction to the Prime Network Vision and Events GUI clients.

• Viewing network element physical and logical inventories, network topologies, and network and service maps.

• Monitoring and viewing network technologies and configurations, with explanations of the data Prime Network provides.

• Viewing, tracking, and resolving fault trends using the reporting, fault management, and path-tracing capabilities of Prime Network.

• Using Prime Network Change and Configuration Management to manage software and device configuration changes made to network devices.

• Using command scripts that are packaged with Prime Network.

Cisco Prime Network 3.10 Administrator Guide

• Introduction to the Prime Network Administration GUI client.

• Setting up and managing the server, units, AVMs; and adding devices by creating and managing VNEs. Includes setting up and managing unit and process redundancy.

• Managing the database, including adjusting data purging settings.

• Controlling user authentication and authorization with user accounts and device scopes.

• Setting up and controlling event monitoring, including configuring trap

Document Provides the Following Information on DPs and e-mail notifications.

• Managing workflows, activations, and command scripts.

• Advanced VNE tasks: Adjusting polling, changing settings that determine device reachability, controlling data collectors and command priorities, and creating cloud VNEs for unmanaged network segments.

• Using and adjusting the backup and restore mechanism.

• System security basics.

• Reference material including device prerequisites, VNE properties, and system log files.

Cisco Prime Network 3.10 Customization Guide

• Extending the information model by:

– Creating soft properties to display additional network element property information in the GUI clients.

– Adding support for new event types, software versions, and models using the VNE Customization Builder.

• Extending device configuration capabilities by creating custom command scripts with Command Builder, using the Workflow Editor to create workflows that execute sequences of tasks, and adding activation scripts to the GUI client using the Activation Wizard Builder.

• Extending and configuring fault management by adding support for unsupported traps and custom syslogs, changing event settings (such as event severity), and using Soft Properties to create new threshold-crossing alarms.

• Extending the GUI clients by adding launch points for external applications.

Cisco Prime Network 3.10 Supported Cisco VNEs

• Devices supported by Prime Network.

• Software versions, topologies, modules, and technologies that Prime Network supports for each device type.

Cisco Prime Network 3.10 Supported Service Alarms

• Service Alarms supported by Prime Network, including background about the network or system state that caused the alarm.

• Source object identifiers (OIDs) for alarms generated by Prime Network, including the source OID description and structure (with examples).

Cisco Prime Network 3.10 Supported Syslogs

• Syslogs supported by Prime Network, with their raw format.

• Registry settings for the syslogs, including event types and subtypes, when the syslog state is generated, and how Prime Network processes the syslogs (severity, whether they are ticketable, can be correlated, are auto-cleared, and so on).

Cisco Prime Network 3.10 Supported Traps

• Traps supported by Prime Network with their version, OID, varbinds, and other technical details.

• Registry settings for the traps, including event types, event subtypes, when the trap is generated, and how Prime Network processes the traps (severity, whether they are ticketable, can be correlated, are autocleared, and so on).

Cisco Prime Network 3.10 Supported System and Security Events

• System events supported by Prime Network, including their severity, cause, description, and source OID.

• Security events supported by Prime Network, including their severity, cause, description, and source OID.

Cisco Prime Network 3.10 Supported Technologies and Topologies

• Supported technologies, and the per-technology support Prime Network provides for element modeling, network modeling, and topology views.

• Supported topologies and how they are discovered and displayed by Prime Network.

Cisco Prime Network 3.10 Integration Developer Guide

• Broadband Query Language (BQL) and Information Model Objects (IMOs) and functions.

• Running BQL over web services (WSDL) connections and over HTTP interfaces.

• Using the Event Notification Service to create trap and e-mail

Document Provides the Following Information on DPs notifications.

• Changing the Root Cause Analysis mechanism using Drools.

• Productivity tools.

• The Cisco Prime Network shell interface (which is no longer supported but can still be used on certain upgrade deployments).

Open Source Used in Cisco Prime Network 3.10

• Lists of licenses and notices for open source software.

Prime OSS Integration Guide for MTOSI and 3GPP

• Information about 3GPP and MTOSI OSS integration and describes the associated network management of its supported devices.

For a complete list of Cisco ANA documentation, see:

Cisco Prime Network 3.10 Documentation

7 Appendix A

Devices Supported in Cisco-Others-v4.0.0.0.jar Supported Device

The following device series are supported by Cisco-Others-v4.0.0.0.jar.

Routers Switches

Cisco 1000 Series Routers Cisco 800 Series Routers Cisco 1600 Series Routers Cisco 1700 Series Modular Access Routers Cisco 1800 Series Integrated Services Routers Cisco 2500 Series Routers Cisco 2600 Series Multiservice Platform Routers Cisco 2800 Series Integrated Services Routers Cisco 3600 Series Multiservice Platform Routers Cisco 3700 Series Multiservice Access Routers Cisco 3800 Series Integrated Services Routers Cisco 4700 Series Routers

Cisco Catalyst 3500 XL Series Switches Cisco Catalyst 3550 Series Switches Cisco Catalyst 3560 Series Switches Cisco Catalyst 3750 Series Switches Cisco Catalyst 4000 Series Switches Cisco Catalyst 5000 Series Switches Cisco Catalyst 6500 Series (CatOS) Switches Cisco ME 6500 Series Ethernet Switches (6524) Cisco Service Control Engines

Access Servers Gateways, Security Appliances, and Generic Devices

Cisco Access Server 5800 Series Cisco AS5300 Series Universal Gateways

8 Appendix B

Specifying IP Addresses for which SNMP Trap and Syslog Events

On many occasions, SNMP syslog’s are generated with source IP address other than the

management IP address. In this case, the IP address has to be added in the “Events” tab

while adding the VNE to the Server, so that Cisco Prime Network associates the events to

the appropriate VNE

8.1.1.1 Reduced VNE Polling support for Nexus 7000

Configuration Tasks for Nexus 7000 reduced polling VNE Creation

Choose “Reduced Polling ( event-based)* “ in “Polling Method” pane under “Polling Tab”

of the VNE Creation window

All VDC should be configured with Cisco Prime Network Management server IP address.

Every VDC in Nexus 7K should be configured with a management ip for EVNE to work.

Example:

interface mgmt0

ip address 10.1.1.1/26

The Cisco Prime Network Management IP address of each VDC should be added in the

Event- Generating IP addresses box which appears in the “Events” Tab of the VNE Creation

window

Logging should be enabled on Nexus 7000 (default vdc as well as non-default vdc’s ) and

add the IP address of Cisco Prime Network Server as logging server host.

Nexus7K(config)# logging server <Cisco Prime Network server IP address> 5 use-vrf <Cisco Prime Network Management VRF> Note: All the above steps are mandatory for events (Syslog/Trap) to work for Nexus 7k. This is applicable for “Regular Polling” also.

8.1.1.2 Support for ACE Card (Cisco 7600) Events

Add the source IP address of the event generated from ACE card residing on the 7600

chassis as mentioned in Sec 8.1.1.1

9 Appendix C

Configuration Task for Cisco 7600 for Modeling only iBGP Routes

The following procedure needs to be done to filter eBGP routes and model only iBGP routes

on 76xx in Prime Network

1) Go to $ANAHOME/Main

2) Run the following regtool command,

./runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-router-repository/vrf-table-

ibgp-telnet/instrumentation services/command"

./runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-router-repository/vrf-table-

ibgp-telnet"/default cisco-router-repository/vrf-table-telnet

./runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-router-repository/vrf-table-

ibgp-telnet/instrumentation services/command"/parseutility

com.sheer.metrocentral.vendor.cisco2.router.command.parsers.CiscoRouterVrfTab

leIbgpParser

3) Restart avm

The following procedure needs to be done to rollback to default behavior in Prime Network,

1) Go to $ANAHOME/Main

2) Run the following regtool command,

/runRegTool.sh -gs localhost remove 0.0.0.0 "site/cisco-router-repository"

3) Restart avm

10 Appendix D

Configuration Task for UCS VNE Modeling

UCS uses the following protocols for modeling Physical & Logical Inventory:-

SNMP, Telent/SSH, HTTP.

While adding UCS VNE besides providing SNMP & Telnet/SSH credentials like any other VNE user

should give HTTP/HTTPS credentials also

Procedure for adding HTTP/HTTPS credentials in Prime Network Administrator:-

While adding VNE after providing General, SNMP & Telnet/SSH credentials. Go to HTTP tab as

shown in the picture below.

Enable HTTP if HTTP is configured in UCS.

Enable HTTPS also if HTTPS is configured in UCS.

Provide Management Path. E.g. nuova.

Provide HTTP credentials (Username & Passowrd) by enabling "Use Authentication".

11 Appendix E

Configuration Task for ASR 901 for seeing the Soft Property

Below steps need to be done for seeing the soft property in GUI

After installing PrimeNetwork-3.8.xTo3.9.x-DP1209 in the server, run the command "./clientregpacker.sh" from the location "$ANAHOME$/Main/scripts"

Restart the client.

12 Appendix F

Configuration Task for ASR 5K VNE Modeling

Starting from StarOS 14.0, following mibs have been disabled by default in the device.

o ENTITY-MIB

o IF-MIB

o ENTITY-STATE-MIB

They need to be enabled for the ASR5k/5500 VNE to model using following configuration in

the device.

o configure

o snmp mib ENTITY-MIB

o snmp mib IF-MIB

o snmp mib ENTITY-STATE-MIB

Verify if above mibs are enabled by using below given command

show snmp server

13 Appendix G

Configuration Task for ASR 9000 for Modeling only iBGP Routes

The following procedure needs to be done to filter eBGP routes and model only iBGP routes on

asr9k in Prime Network

1) Go to $ANAHOME$/Main and run

2) Run the following regtool command,

./runRegTool.sh -gs localhost add 0.0.0.0 "site/cisco-opt-xr-router-iox-repository/vrf-

table-ibgp-telnet/instrumentation services/command"

./runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-opt-xr-router-iox-repository/vrf-

table-ibgp-telnet"/default cisco-opt-xr-router-iox-repository/crs1-vrf-table-telnet

./runRegTool.sh -gs localhost set 0.0.0.0 "site/cisco-opt-xr-router-iox-repository/vrf-

table-ibgp-telnet/instrumentation services/command"/parseutility

com.sheer.metrocentral.vendor.cisco2.router.command.parsers.CiscoRouterVrfTable

IbgpParser

3) Restart the avm

The following procedure needs to be done to rollback to default behavior in Prime Network,

1) Go to $ANAHOME$/Main and run

2) Run the following regtool command,

./runRegTool.sh -gs localhost remove 0.0.0.0 "site/cisco-opt-xr-router-iox-repository"

3) Restart the AVM.