Reservoir Stimulation on CD-ROM User Guide
Reservoir Stimulation User Guide
Minimum System Requirements
i486 or Pentium processor-based personal computer
Microsoft Windows 95, Windows 98, or Windows NT 4.0 with Service
Pack 3 or later
10 MB of available RAM on Windows 95 and Windows 98 (16 MB
recommended)
16 MB of available RAM on Windows NT (24 MB recommended)
10 MB of available hard-disk space
This CD-ROM contains Reservoir Stimulation and the latest
version of Adobe Acrobat Reader 4.0. If you do not have Acrobat
Reader 4.0 installed on your system, you will need to install it
before installing Reservoir Stimulation. If you have an earlier
version of Acrobat Reader installed on your system, you will need
to upgrade to the latest version.
Upgrading Adobe Acrobat Reader 4.0
If you are using an earlier version of Acrobat Reader you will
need to upgrade to Acrobat Reader 4.0. We recommend you uninstall
your current installation first and then install the current
version from this CD-ROM.
To uninstall an earlier version, locate Settings | Control Panel
from the Start button. Double- click on the Add/Remove Programs
icon and select the entry that describes your current installation
(i.e. Adobe Acrobat Reader 3.0). Click on the Add/Remove button to
start the un-installation. When the process has finished, we
recommend that you restart your machine. You are now ready to
install Acrobat Reader 4.0.
Existing installations of Acrobat Reader 4.0
If you already have an installation of Acrobat Reader 4.0, you
will need to make sure that it has the Search plug-in. In order to
check that the plug-in is installed, start Acrobat Reader and from
the Menu bar select Help | About Plug-ins. If the option Acrobat
Search is displayed, select it and make sure that it is Version
4.0. If it is not, or the option is not being displayed, it is
likely that Acrobat Search is not installed. We recommend you
un-install your current installation (as detailed above) and
reinstall from the version on the CD-ROM.
Installing Adobe Acrobat Reader 4.0
Locate the Adobe directory on the CD-ROM using My Computer and
double-click on the rs405eng.exe file. The Adobe Acrobat Reader 4.0
installation will now begin. You should now follow the instructions
on screen. When the installation has finished, you may be advised
to restart your computer. You should do this before proceeding with
the Reservoir Stimulation installation.
Installing Reservoir Stimulation
Locate the Resstim directory on the CD-ROM using My Computer and
double-click on the setup.exe file. You will now be shown a
Copyright and Disclaimer statement. Please read the terms and
conditions. If you do not agree with them, click on the No button
and the installation will terminate. If you agree to them, click on
the Yes button and the installation will continue. The installer
will now detect if you have Acrobat Reader 4.0 installed on your
system. You will be asked Do you wish to use this installation for
Reservoir Stimulation? If you have just re/installed Acrobat Reader
4.0 from the CD-ROM or have determined that your current
installation has the Search Plug-in, you should choose Yes.
Follow the remaining instructions on screen until the
installation is complete.
You can exit the installation at any time by clicking on the
Cancel button.
During the installation, a shortcut will have been created on
your Desktop. To start Reservoir Stimulation, simply click on the
shortcut.
Having Problems?
Requests for technical assistance in connection with the CD-ROM
should be made to:
Customer Service Department
John Wiley & Sons, Ltd
1 Oldlands Way, Bognor Regis
West Sussex, PO22 9SA, UK
Tel: Freephone (UK Only) 0800 834993 or +44 (0) 1243 843312
Fax: +44 (0) 1243 843315
Email: [email protected]
