Reader_Configuration_Codes for DATAMAN cognex

DataMan® Configuration

Codes

12/5/2011 Version 4.2

DataMan® Configuration Codes

12/5/2011 | Version 4.2

P a g e | 2

Legal Notices

The software described in this document is furnished under license, and may be used or

copied only in accordance with the terms of such license and with the inclusion of the

copyright notice shown on this page. Neither the software, this document, nor any copies

thereof may be provided to, or otherwise made available to, anyone other than the

licensee. Title to, and ownership of, this software remains with Cognex Corporation or its

licensor. Cognex Corporation assumes no responsibility for the use or reliability of its

software on equipment that is not supplied by Cognex Corporation. Cognex Corporation

makes no warranties, either express or implied, regarding the described software, its

merchantability, non-infringement or its fitness for any particular purpose.

The information in this document is subject to change without notice and should not be

construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible

for any errors that may be present in either this document or the associated software.

No part of this document may be reproduced or transmitted in any form or by any means,

electronic or mechanical, for any purpose, nor transferred to any other media or language

without the written permission of Cognex Corporation.

Copyright © 2011 Cognex Corporation. All Rights Reserved.

Portions of the hardware and software provided by Cognex may be covered by one or more

of the U.S. and foreign patents listed below as well as pending U.S. and foreign patents.

Such pending U.S. and foreign patents issued after the date of this document are listed on

Cognex web site at http://www.cognex.com/patents.

VisionPro

5481712, 5495537, 5548326, 5583954, 5602937, 5640200, 5751853, 5768443, 5825913, 5850466, 5872870, 5901241, 5943441, 5978080, 5978521, 5987172, 6005978, 6039254, 6064388, 6075881, 6137893, 6141033, 6167150, 6215915, 6240208, 6324299, 6381366, 6381375, 6411734, 6421458, 6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842, 6697535, 6718074, 6748110, 6771808, 6804416, 6836567, 6850646, 6856698, 6920241, 6959112, 6963338, 6973207, 6975764, 6985625, 6993177, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366, 7313761, EP0713593, JP3522280, JP3927239

DataMan

5742037, 5943441, 6215915, 6236769, 6282328, 6381375, 6408109, 6457032, 6690842, 6941026, 7175090, 7181066, 7412106, 7427028, 7549582, 7604174, 7614563, 7617984, US-2005-0087601-A1, US-2006-0131418-A1, US-2006-0131419-A1, US-2006-0133757-A1, US-2007-0090193-A1, US-2007-0091332-A1, US-2007-0152064-A1, US-2007-0170259-A1, US-2008-0004822-A1, US-2008-0011855-A1, US-2008-0142604-A1, US-2008-0143838-A1, US-2008-0158365-A1, US-2009-0090781-A1, US-2009-0108073, US-2009-0121027-A1, US-2009-0166424-A1, US-2009-0294541-A1, WO06065619A1, EP1687752

CVL

5495537, 5548326, 5583954, 5602937, 5640200, 5717785, 5751853, 5768443, 5825483, 5825913, 5850466, 5859923, 5872870, 5901241, 5943441, 5949905, 5978080, 5987172, 5995648, 6002793, 6005978, 6064388, 6067379, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6240208, 6240218, 6324299, 6381366, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842, 6718074, 6748110, 6751361, 6771808, 6798925, 6804416, 6836567, 6850646, 6856698, 6920241, 6959112, 6975764, 6985625, 6993177, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366, EP0713593, JP3522280, JP3927239

VGR

5495537, 5602937, 5640200, 5768443, 5825483, 5850466, 5859923, 5949905, 5978080, 5995648, 6002793, 6005978, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6324299, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6690842, 6748110, 6751361, 6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366

OMNIVIEW

6215915, 6381375, 6408109, 6421458, 6457032, 6459820, 6594623, 6804416, 6959112, 7383536

CVL Vision Library

5495537, 5548326, 5583954, 5602937, 5640200, 5717785, 5751853, 5768443, 5825483, 5825913, 5850466, 5859923, 5872870, 5901241, 5943441, 5949905, 5978080, 5987172, 5995648, 6002793, 6005978, 6064388, 6067379, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6240208, 6240218, 6324299, 6381366, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6687402, 6690842, 6718074, 6748110, 6751361, 6771808, 6798925, 6804416, 6836567, 6850646, 6856698, 6920241, 6959112, 6975764, 6985625, 6993177, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366, EP0713593, JP3522280, JP3927239

SMD 4

5995648, 5850466, 6751361, 6690842, 6563324, 6490375, 5949905, 5978080, 6137893, 6167150, 6075881, 6748110, 5859923, 6411734, 6324299, 6516092, 7190834, 6658145, 6836567, 6850646, 6975764, 6985625, 6993192, 7006712, 7043081, 7058225, 7065262, 7088862, 7164796, 7251366, 6856698, 6002793, 6005978, 6771808, 6804416, 7016539, 6959112, 5602937, 7242801, 5640200, 5495537, 5768443, 5825483, 6421458, 6459820,

http://www.cognex.com/patents


12/5/2011 | Version 4.2

P a g e | 3

Legal Notices

6215915, 6381375, 6457032, 6157732, 6408109, 6141033, 6026176, 6442291, 6151406, 6396942, 6614926, 5371690, 5845007, 5943441, 6963338, 5805722, 5909504, 5933523, 5964844, 5974169, 5987172, 6078700, 6252986, 6278796, 6307210, 6408429, 6424734, 6526165, 6571006, 6639624, 6681039, 6748104, 6813377, 6853751, 6898333, 6950548, 6993177, 7139421, 5757956

BGA II and BGA III

5495537, 5602937, 5640200, 5768443, 5801966, 5825483, 5850466, 5859923, 5949905, 5978080, 5995648, 6002793, 6005978, 6026176, 6055328, 6075881, 6115042, 6118893, 6130959, 6137893, 6141009, 6141033, 6151406, 6157732, 6167150, 6215915, 6289117, 6324299, 6353676, 6381375, 6396942, 6408109, 6411734, 6421458, 6442291, 6457032, 6459820, 6490375, 6516092, 6563324, 6577775, 6614926, 6658145, 6690842, 6748110, 6751361, 6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7190834, 7242801, 7251366

Wire Bonder

5495537, 5532739, 5581632, 5602937, 5640199, 5640200, 5642158, 5676302, 5754679, 5757956, 5768443, 5825483, 5835622, 5850466, 5859923, 5861909, 5949905, 5978080, 5991436, 5995648, 6002793, 6005978, 6035066, 6061467, 6075881, 6137893, 6141033, 6157732, 6167150, 6215915, 6289492, 6324299, 6381375, 6408109, 6411734, 6421458, 6457032, 6459820, 6490375, 6516092, 6563324, 6658145, 6690842, 6748110, 6751361, 6771808, 6804416, 6836567, 6850646, 6856698, 6959112, 6975764, 6985625, 6993192, 7006712, 7016539, 7043081, 7058225, 7065262, 7088862, 7164796, 7171036, 7190834, 7242801, 7251366

The following are registered trademarks of Cognex Corporation:

acuReader® BGAII® Check it with Checker® Checker® Cognex Vision for Industry CVC-1000® CVL® DataMan® DisplayInspect® DVT® EasyBuilder® IDMax® In-SightIn-Sight 2000® In-Sight® (insignia with cross-hairs) MVS-8000® OmniView® PatFind® PatFlex® PatInspect® PatMax® PatQuick® SensorView® SmartLearn® SmartView® SMD4® UltraLight® Vision Solutions® VisionPro® VisionView®

The following are trademarks of Cognex Corporation:

3D-Locate™ 3DMax™ CheckPoint™ Cognex VSoC™ FFD™ iLearn™ InspectEdge™ Legend™ LineMax™ NotchMax™ ProofRead™ SmartAdvisor™ SmartSync™ SmartSystem™

Other product and company names mentioned herein are the trademarks, or registered

trademarks, of their respective owners.


12/5/2011 | Version 4.2

P a g e | 4

Contents

Configuration Codes ................................................................................................... 5

Product Settings ........................................................................................................ 6

Reset.......................................................................................................................... 7

Diagnostics ................................................................................................................ 8

Disconnect ................................................................................................................. 9

Setup ....................................................................................................................... 10

Light Aimer .............................................................................................................. 11

Trigger Type............................................................................................................. 12

Global Shutter Emulation ......................................................................................... 14

Custom Commands .................................................................................................. 15

Maximum Exposure .................................................................................................. 16

Symbology Settings ................................................................................................. 23

2D Symbology Settings ............................................................................................ 30

1D Symbology Settings ............................................................................................ 31

Training ................................................................................................................... 33

Data Validation/Data Formatting ............................................................................. 34

Non-Printable Characters ......................................................................................... 35

Wireless ................................................................................................................... 36

Buffering .................................................................................................................. 37

Timeouts .................................................................................................................. 38

Wake-up Message .................................................................................................... 39

PS/2 Keyboard Emulation Enable ............................................................................. 40

USB Connection ........................................................................................................ 41

USB Mode ................................................................................................................. 42

Communication Settings .......................................................................................... 44

RS-232 Baud Rate .................................................................................................... 46

RS-232 Word Length ................................................................................................ 47

RS-232 Handshaking ................................................................................................ 49

Master/Slave ........................................................................................................... 50

Keyboard Country .................................................................................................... 51

Alt Key Combo Zero Padding .................................................................................... 53

USB Keyboard Inter-Character Delay ....................................................................... 54

Code Quality Settings ............................................................................................... 55


12/5/2011 | Version 4.2

P a g e | 5

Configuration Codes

Configuration Codes

Configuration Codes are special Data Matrix codes that are read irrespective of the Data

Matrix symbology being checked. Use Configuration Codes to configure your reader without

the Setup Tool. Lights and beeping indicate that a Configuration Code was read.

Adjust focus settings if you have trouble reading Configuration Codes.


12/5/2011 | Version 4.2

P a g e | 6

Product Settings

Product Settings

Reset Scanner to Factory Defaults

DMAE50 ● DM100 ● DM200 ● DM500 ● DM700 ● DM7500 ● DM8000

Reset Code Quality Calibration

DM100 ● DM7500

Reset Base Station to Factory Defaults

DM7550Base

Reset Base Station to Factory Defaults

DM8000Base


12/5/2011 | Version 4.2

P a g e | 7

Reset

Reset

Reboot Scanner



12/5/2011 | Version 4.2

P a g e | 8

Diagnostics

Diagnostics

Output Diagnostic String

(only with RS-232 and USB connections)



12/5/2011 | Version 4.2

P a g e | 9

Disconnect

Disconnect

Unlink Bluetooth Connection

DM7550


12/5/2011 | Version 4.2

P a g e | 10

Setup

Setup

Enable Setup 1 Only*

DM7500 ● DM8500

Enable Setup 2 Only

DM7500 ● DM8500

Enable Setup 3 Only

DM7500 ● DM8500

Enable Setup 4 Only

DM7500 ● DM8500


12/5/2011 | Version 4.2

P a g e | 11

Light Aimer

Light Aimer

*Light aimer ON

(default for all devices except for DM500)

DMAE50 ● DM100 ● DM200 ● DM500 ● DM8000

*Light aimer OFF

(default for DM500)

DMAE50 ● DM100 ● DM200 ● DM500 ● DM8000


12/5/2011 | Version 4.2

P a g e | 12

Trigger Type

Trigger Type

Enable Presentation

DMAE50 ● DM100 ● DM200 ● DM500 ● DM700 ● DM8000

*Enable Manual (button)


DMAE50 ● DM100 ● DM200 ● DM500 ● DM700 ● DM8000

Enable Single (external)

DMAE50 ● DM100 ● DM200 ● DM500

Enable Burst (external)

DMAE50 ● DM100 ● DM200 ● DM500

Enable Self (internal)

DMAE50 ● DM100 ● DM200 ● DM500


12/5/2011 | Version 4.2

P a g e | 13

Trigger Type

*Enable Continuous (external)

(default for DM500)

DMAE50 ● DM100 ● DM200 ● DM500

Enable Presentation Mode

DM7500

*Disable Presentation Mode

DM7500


12/5/2011 | Version 4.2

P a g e | 14

Global Shutter Emulation

Global Shutter Emulation

Enable Global Shutter Emulation

DMAE50

*Disable Global Shutter Emulation

DMAE50


12/5/2011 | Version 4.2

P a g e | 15

Custom Commands

Custom Commands

Enable Serial Trigger

DMAE50 ● DM100 ● DM200 ● DM500

*Disable Serial Trigger

DMAE50 ● DM100 ● DM200 ● DM500

Enable Echo Commands

DMAE50 ● DM100 ● DM200 ● DM500

*Disable Echo Commands

DMAE50 ● DM100 ● DM200 ● DM500


12/5/2011 | Version 4.2

P a g e | 16

Maximum Exposure

Maximum Exposure

1/10000 s

DMAE50 ● DM100 ● DM200

1/7500 s

DMAE50 ● DM100 ● DM200

1/5000 s

DMAE50 ● DM100 ● DM200

1/4000 s

DMAE50 ● DM100 ● DM200

1/3000 s

DMAE50 ● DM100 ● DM200


12/5/2011 | Version 4.2

P a g e | 17

Maximum Exposure

1/2500 s

DMAE50 ● DM100 ● DM200

1/2000 s

DMAE50 ● DM100 ● DM200

1/1500 s

DMAE50 ● DM100 ● DM200

1/1250 s

DMAE50 ● DM100 ● DM200

1/1000 s

DMAE50 ● DM100 ● DM200

1/750 s

DMAE50 ● DM100 ● DM200


12/5/2011 | Version 4.2

P a g e | 18

Maximum Exposure

1/500 s

DMAE50 ● DM100 ● DM200

1/300 s

DMAE50 ● DM100 ● DM200

1/250 s

DMAE50 ● DM100 ● DM200

1/200 s

DMAE50 ● DM100 ● DM200

1/150 s

DMAE50 ● DM100 ● DM200

1/125 s

DMAE50 ● DM100 ● DM200


12/5/2011 | Version 4.2

P a g e | 19

Maximum Exposure

1/100 s

DMAE50 ● DM100 ● DM200

*1/75 s

(default for DMAE50)

DMAE50 ● DM100 ● DM200

*1/50 s

(default for DM100)

DMAE50 ● DM100 ● DM200

*1/40 s

(default for DM200)

DMAE50 ● DM100 ● DM200

10 us

DM500

20 us

DM500


12/5/2011 | Version 4.2

P a g e | 20

Maximum Exposure

33 us

DM500

50 us

DM500, DM8000

67 us

DM500, DM8000

100 us

DM500, DM8000

133 us

DM500, DM8000

*170 us

(default for DM500)

DM500, DM8000


12/5/2011 | Version 4.2

P a g e | 21

Maximum Exposure

250 us

DM8000

500 us

DM8000

800 us

DM8000

1000 us

DM8000

2000 us

DM8000

5000 us

DM8000


12/5/2011 | Version 4.2

P a g e | 22

Maximum Exposure

8000 us

DM8000

10000 us

DM8000

*13333 us

(default for DM8000)

DM8000

20000 us

DM8000

25000 us

DM8000


12/5/2011 | Version 4.2

P a g e | 23

Symbology Settings

Symbology Settings

*Enable Data Matrix



*Disable Data Matrix

(default for DM500)


Enable QR Code


*Disable QR Code


*Enable Code 128


Disable Code 128



12/5/2011 | Version 4.2

P a g e | 24

Symbology Settings

*Enable UPC/EAN


Disable UPC/EAN


*Enable Code 39


Disable Code 39


*Enable Code 93


Disable Code 93



12/5/2011 | Version 4.2

P a g e | 25

Symbology Settings

*Enable Interleaved 2 of 5


Disable Interleaved 2 of 5


*Enable Codabar


Disable Codabar


Enable Pharmacode


*Disable Pharmacode



12/5/2011 | Version 4.2

P a g e | 26

Symbology Settings

*Enable PDF417

(default for handheld readers)


*Disable PDF417

(default for fixed mount readers)


Enable Databar


*Disable Databar


Enable Micro PDF417


*Disable Micro PDF417



12/5/2011 | Version 4.2

P a g e | 27

Symbology Settings

Enable EAN.UCC Composite


*Disable EAN.UCC Composite


Enable POSTNET


*Disable POSTNET


Enable PLANET


*Disable PLANET



12/5/2011 | Version 4.2

P a g e | 28

Symbology Settings

Enable Japan Post


*Disable Japan Post


Enable Australia Post


*Disable Australia Post


Enable UPU


*Disable UPU



12/5/2011 | Version 4.2

P a g e | 29

Symbology Settings

Enable Intelligent Mail Barcode


*Disable Intelligent Mail Barcode



12/5/2011 | Version 4.2

P a g e | 30

2D Symbology Settings


Enable Extreme Print Growth

(Data Matrix only)


*Disable Extreme Print Growth

(Data Matrix only)



12/5/2011 | Version 4.2

P a g e | 31



*Enable Use Target Decoding

(simulates laser scanning)

(default for handheld readers except for DM8000)

DMAE50 ● DM100 ● DM200 ● DM700 ● DM7500 ● DM8000

*Disable Use Target Decoding

(simulates laser scanning)

(default for fixed mount readers and DM8000)

DMAE50 ● DM100 ● DM200 ● DM700 ● DM7500 ● DM8000

*Enable Short Quiet Zone



*Disable Short Quiet Zone

(default for DM500)


*Code Orientation: Omnidirectional

(default for DM500X and DM500QL readers)

DM500

Code Orientation: Ladder and Picket Fence

DM500


12/5/2011 | Version 4.2

P a g e | 32


Code Orientation: Ladder

DM500

Code Orientation: Picket Fence

(default for DM500L readers)

DM500


12/5/2011 | Version 4.2

P a g e | 33

Training

Training

Enable incremental training

DMAE50 ● DM100 ● DM200 ● DM500

*Disable incremental training

DMAE50 ● DM100 ● DM200 ● DM500

Enable untrained symbologies

DMAE50 ● DM100 ● DM200 ● DM500

*Disable untrained symbologies

DMAE50 ● DM100 ● DM200 ● DM500


12/5/2011 | Version 4.2

P a g e | 34

Data Validation/Data Formatting

Data Validation/Data Formatting

Enable DoD UID Validation with UII Output

(Enable Data Matrix prior to reading this code)


*Disable DoD UID Validation with UII Output

(Enable Data Matrix prior to reading this code)


Use Next Code As Match String

(Enable Match String Validation prior to

reading this code)



12/5/2011 | Version 4.2

P a g e | 35

Non-Printable Characters

Non-Printable Characters

Enable Translate Unprintable Characters


*Disable Translate Unprintable Characters



12/5/2011 | Version 4.2

P a g e | 36

Wireless

Wireless

Unassign Reader from Base Station

DM8000 Wireless


12/5/2011 | Version 4.2

P a g e | 37

Buffering

Buffering

*Enable Offline Buffering

DM7550

Disable Offline Buffering

DM7550

*Enable Offline Buffering

DM8000 Wireless

Disable Offline Buffering

DM8000 Wireless


12/5/2011 | Version 4.2

P a g e | 38

Timeouts

Timeouts

Enable Never Enter Power Save Mode

DM7550

*Disable Never Enter Power Save Mode

DM7550

Enable Never Enter Power Off Mode

DM8000 Wireless

*Disable Never Enter Power Off Mode

DM8000 Wireless

Enable Never Enter Hibernation Mode

DM8000 Wireless

*Disable Never Enter Hibernation Mode

DM8000 Wireless


12/5/2011 | Version 4.2

P a g e | 39

Wake-up Message

Wake-up Message

Enable Output Diagnostic String on Wake-up


*Disable Output Diagnostic String on Wake-up



12/5/2011 | Version 4.2

P a g e | 40

PS/2 Keyboard Emulation Enable



DM700 ● DM7500 ● DM8000

*PS/2 Keyboard Emulation Disable

DM700 ● DM7500 ● DM8000

Base Station PS/2 Keyboard Emulation Enable

DM8000Base

Base Station PS/2 Keyboard Emulation Disable

DM8000Base


12/5/2011 | Version 4.2

P a g e | 41

USB Connection

USB Connection

*USB-COM/RS-232

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

USB-COM/RS-232

DM7550

USB Keyboard

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Enable USB Keyboard for the base station

DM8000Base

*Disable USB Keyboard for the base station

DM8000Base


12/5/2011 | Version 4.2

P a g e | 42

USB Mode

USB Mode

USB compatibility mode enabled

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

*USB compatibility mode disabled

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

USB compatibility mode enabled

DM8000Base

*USB compatibility mode disabled

DM8000Base

USB 2.0 mode

DM8000


12/5/2011 | Version 4.2

P a g e | 43

USB Mode

*USB 1.1 mode

DM8000

USB 2.0 mode on base station

DM8000Base

*USB 1.1 mode on base station

DM8000Base


12/5/2011 | Version 4.2

P a g e | 44

Communication Settings


*Enable DHCP

(default for all Ethernet readers)

DMAE50 ● DM200 ● DM500 ● DM8000

DO NOT SCAN this code with a DM8000 wireless reader.

Enable Multi-Port (RS-232 Sharing)

DM100 ● DM200 ● DM500

*Disable Multi-Port (RS-232 Sharing)

DM100 ● DM200 ● DM500

Enable EtherNet/IP

DM200 ● DM500 ● DM8000 (corded)

*Disable EtherNet/IP

DM200 ● DM500 ● DM8000 (corded)

Enable PROFINET

DM200 ● DM500 ● DM8000 (corded)


12/5/2011 | Version 4.2

P a g e | 45


*Disable PROFINET

DM200 ● DM500 ● DM8000 (corded)

Enable MC Protocol

DM200 ● DM8000 (corded)

*Disable MC Protocol


Enable Modbus TCP


Disable Modbus TCP



12/5/2011 | Version 4.2

P a g e | 46

RS-232 Baud Rate

RS-232 Baud Rate

9600 BPS

DMAE50 ● DM100 ● DM200 ● DM500 ● DM700 ● DM7500 ● DM8000 (corded)

19200 BPS


*38400 BPS

(default for DM7500)


*57600 BPS

(default for DMAE50 and DM8000)


*115200 BPS

(default for DM100, DM200, DM500, DM700, and DM8000Base)

DM100 ● DM200 ● DM500 ● DM700 ● DM7500


12/5/2011 | Version 4.2

P a g e | 47

RS-232 Word Length

RS-232 Word Length

7 Data, 1 Stop, Even


7 Data, 1 Stop, None


7 Data, 1 Stop, Odd






7 Data, 2 Stop, Odd



12/5/2011 | Version 4.2

P a g e | 48

RS-232 Word Length



*8 Data, 1 Stop, None


8 Data, 1 Stop, Odd



DMAE50 ● DM100 ● DM200 ● DM500 ● DM700 ● DM8000 (corded)



8 Data, 2 Stop, Odd



12/5/2011 | Version 4.2

P a g e | 49

RS-232 Handshaking

RS-232 Handshaking

*RTS/CTS Off

DMAE50 ● DM7500 ● DM8000 (corded)

RTS/CTS On

DMAE50 ● DM7500 ● DM8000 (corded)


12/5/2011 | Version 4.2

P a g e | 50

Master/Slave

Master/Slave

Enable MST

DM500

*Disable MST

DM500

Select Reader as Master

DM500

Deselect Reader as Master

DM500


12/5/2011 | Version 4.2

P a g e | 51

Keyboard Country

Keyboard Country

*USA

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Germany

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

France

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Spain

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Japan

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Norway

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000


12/5/2011 | Version 4.2

P a g e | 52

Keyboard Country

Finland

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Alt Key Combo

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000


12/5/2011 | Version 4.2

P a g e | 53

Alt Key Combo Zero Padding

Alt Key Combo Zero Padding

*Enable Alt Key Combo Zero Padding

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

Disable Alt Key Combo Zero Padding

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000


12/5/2011 | Version 4.2

P a g e | 54

USB Keyboard Inter-Character Delay

USB Keyboard Inter-Character Delay

*100 ms OFF

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000

100 ms ON

DMAE50 ● DM100 ● DM700 ● DM7500 ● DM8000


12/5/2011 | Version 4.2

P a g e | 55

Code Quality Settings


Code Quality On

DM100 ● DM7500

*Code Quality Off

DM100 ● DM7500

*Enable Bright Field – Diffuse Perpendicular (90)

DM100

Disable Bright Field – Diffuse Perpendicular (90)

DM100

*Enable Dark Field – 30 Degree All Quadrants (30Q)

DM100 ● DM7500

Disable Dark Field – 30 Degree All Quadrants (30Q)

DM100 ● DM7500


12/5/2011 | Version 4.2

P a g e | 56


*Enable Dark Field – 30 Degree E-W Quadrants (30T)

DM100 ● DM7500

Disable Dark Field – 30 Degree E-W Quadrants (30T)

DM100 ● DM7500

*Enable Dark Field – 30 Degree N-S Quadrants (30T)

DM100 ● DM7500

Disable Dark Field – 30 Degree N-S Quadrants (30T)

DM100 ● DM7500

Enable Custom Light Configuration

DM100

*Disable Custom Light Configuration

DM100

* - default setting

Documents

Reader_Configuration_Codes for DATAMAN cognex