Click here to load reader

Reader Configuration Codes - ... TableofContents LegalNotices 2 TableofContents 3 ConfigurationCodes 5 ProductSettings 6 Reset 7 Diagnostics 8 Setup 9 LightAimer 10 TriggerType 11

  • View
    7

  • Download
    0

Embed Size (px)

Text of Reader Configuration Codes - ... TableofContents LegalNotices 2 TableofContents 3 ConfigurationCodes...

  • DataMan® Configuration Codes

    9/22/2015 Version 5.6.0

  • Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms of such license and with the inclusion of the copyright notice shown on this page. Neither the software, this document, nor any copies thereof may be provided to, or otherwise made available to, anyone other than the licensee. Title to, and ownership of, this software remains with Cognex Corporation or its licensor. Cognex Corporation assumes no responsibility for the use or reliability of its software on equipment that is not supplied by Cognex Corporation. Cognex Corporation makes no warranties, either express or implied, regarding the described software, its merchantability, non-infringement or its fitness for any particular purpose.

    The information in this document is subject to change without notice and should not be construed as a commitment by Cognex Corporation. Cognex Corporation is not responsible for any errors that may be present in either this document or the associated software.

    Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, nor transferred to any other media or language without the written permission of Cognex Corporation.

    Copyright © 2015. Cognex Corporation. All Rights Reserved.

    Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as well as pending U.S. and foreign patents listed on the Cognex web site at: http://www.cognex.com/patents.

    The following are registered trademarks of Cognex Corporation:

    Cognex, 2DMAX, Advantage, Alignplus, Assemblyplus, Check it with Checker, Checker, Cognex Vision for Industry, Cognex VSOC, CVL, DataMan, DisplayInspect, DVT, EasyBuilder, Hotbars, IDMax, In-Sight, Laser Killer, MVS-8000, OmniView, PatFind, PatFlex, PatInspect, PatMax, PatQuick, SensorView, SmartView, SmartAdvisor, SmartLearn, UltraLight, Vision Solutions, VisionPro, VisionView

    The following are trademarks of Cognex Corporation:

    The Cognex logo, 1DMax, 3D-Locate, 3DMax, BGAII, CheckPoint, Cognex VSoC, CVC-1000, FFD, iLearn, In-Sight (design insignia with cross-hairs), In-Sight 2000, InspectEdge, Inspection Designer, MVS, NotchMax, OCRMax, PatMax RedLine, ProofRead, SmartSync, ProfilePlus, SmartDisplay, SmartSystem, SMD4, VisiFlex, Xpand

    Other product and company trademarks identified herein are the trademarks of their respective owners.

    2

    Legal Notices

    http://www.cognex.com/patents

  • Table of Contents Legal Notices 2 Table of Contents 3 Configuration Codes 5 Product Settings 6 Reset 7 Diagnostics 8 Setup 9 Light Aimer 10 Trigger Type 11 Global Shutter Emulation 12 Custom Commands 13 Maximum Exposure 14 Symbology Settings 17 2D Symbology Settings 25 QR Code Maximum Grid Size 27 1D Symbology Settings 29 Training 31 Data Validation / Data Formatting 32 Non-Printable Characters 34 Wireless 35 Buffering 36 Power Management 37 Wake-up Message 38 PS/2 Keyboard Emulation Enable 39 Mobile Computer Keyboard Emulation 40 ASCII Keyboard Command Codes 41 USB Connection 52 USB Mode 54 Communication Settings 56 RS-232 Baud Rate 60 RS-232 Parity Settings 62

    3

    Table of Contents

  • RS-232 Databit Settings 64 RS-232 Stopbit Settings 65 RS-232 Handshaking 66 RS-232 Routing 67 Network Settings 68 Decode Settings 69 Master / Slave 70 Keyboard Country 71 Alt Key Combo Zero Padding 74 USB Keyboard Inter-Character Delay 75 Code Quality Settings 76

    4

    Table of Contents

  • Configuration Codes Configuration Codes are special Data Matrix codes to configure your reader without the DataMan Setup Tool. Lights and beeping indicate that a Configuration Code was read. Beeps can also indicate that a command has not been executed: if the code is read but the command is not executed (e.g. because of the command not being valid for the type of reader used for reading the code), the reader gives 2 beeps.

    You can read these codes without enabling the decoding of Data Matrix symbols. In such cases, make sure that you use Manual or Presentation trigger mode.

    Adjust focus settings if you have trouble reading Configuration Codes.

    Note: When using wireless handheld readers, the reader must be put on the base station for security reasons after reading a printed configuration code.

    5

    Configuration Codes

  • Product Settings

    Reset Scanner to Factory Defaults

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●

    DM9050 ● DM9500

    Reset Code Quality Calibration

    DM100

    Reset Base Station to Factory Defaults

    DM8000Base

    6

    Product Settings

  • Reset

    Reboot Scanner

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●

    DM9050 ● DM9500

    Reboot Base Station

    DM8000Base

    7

    Reset

  • Diagnostics

    Output Diagnostic String (only with RS-232 and USB connections)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●

    DM9050 ● DM9500

    Output Diagnostic String (through the DM8000 Base Station with RS-232 and USB

    connections)

    DM8000 wireless

    8

    Diagnostics

  • Setup

    Enable Setup 1 Only

    DM8500 ● DM8600 ● DM9050 ● DM9500

    Enable Setup 2 Only

    DM8500 ● DM8600 ● DM9050 ● DM9500

    Enable Setup 3 Only

    DM8500 ● DM8600 ● DM9050 ● DM9500

    Enable Setup 4 Only

    DM8500 ● DM8600 ● DM9050 ● DM9500

    9

    Setup

  • Light Aimer

    *Light aimer ON (default for DMAE50, DM50, DM60, DM100, DM200, and

    DM8000)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM8000 ● DM9050 ● DM9500

    *Light aimer OFF (default for DM300)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM8000 ● DM9050 ● DM9500

    10

    Light Aimer

  • Trigger Type

    Enable Presentation

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●

    DM9050 ● DM9500

    *Enable Manual (button)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503 ● DM700 ● DM8000 ●

    DM9050 ● DM9500

    Enable Single (external)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503

    Enable Burst (external)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM500● DM503

    Enable Self (internal)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503

    Enable Continuous (external)

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM500● DM503

    11

    Trigger Type

  • Global Shutter Emulation

    Enable Global Shutter Emulation

    DMAE50

    *Disable Global Shutter Emulation

    DMAE50

    12

    Global Shutter Emulation

  • Custom Commands

    Enable Serial Trigger

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM503

    *Disable Serial Trigger

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503

    Enable Echo Commands

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503

    *Disable Echo Commands

    DMAE50 ● DM50 ● DM60 ● DM100 ● DM150 ● DM200 ● DM260 ● DM300 ● DM360 ● DM503

    13

    Custom Commands

  • Maximum Exposure

    100 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ● DM8000 ● DM9050 ● DM9500

    133 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ● DM8000 ● DM9050 ● DM9500

    *170 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ● DM8000 ● DM9050 ● DM9500

    250 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360● DM503 ● DM8000 ● DM9050 ● DM9500

    500 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360● DM503 ● DM8000 ● DM9050 ● DM9500

    14

    Maximum Exposure

  • 800 µs

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ● DM8000 ● DM9050 ● DM9500

    *1000 µs (default for DM50, DM60, DM300, DM360, and DM503)

    DM50 ● DM60 ● DM150 ● DM260 ● DM300 ● DM360 ● DM503 ● DM8000 ● DM9050 ● DM9500

    2000 µs

    DM50 ● DM60● DM503 ● DM8000 ● DM9050 ● DM9500

    5000 µs

    DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500

    8000 µs

    DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500

    10000 µs

    DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500

    15

    Maximum Exposure

  • *13333 µs (default for DM8000)

    DM50 ● DM60 ● DM503 ● DM8000 ● DM9050 ● DM9500

    20000 µs

    DM50 ●