Upload
others
View
24
Download
0
Embed Size (px)
Citation preview
Press K1 and K3 to choose a channel, press UP, STOP DOWN to control the channel.
11.03.03.SMS-RE1101/1104YT-V1
4.Single control
Press UP and DOWN simultaneously once. Then press STOP once. Code learning is done.
single channel
RE1101
double channels
RE1102
K1K2
K3
16M
2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
RE1103-16C
K1K2
K3
RE1103-4T
14 082 3 4
Su
K1K2
K3
RE1104
K1K2
K3
RE1104-i
down down down
down
16 channels
4 channels with timer 16 channels with 8 intermediate positions
16 channels with 3 intermediate positions
RE1101-1104 series instruction
03.Screen Emitter (take 16 channels as an sample)
6.Multi-channel control (screen emitter) note: short press K2, you can change between multi-channel control and single control
7.Cancel multi-channel control
75%
50%
25%
RE1101-i
25%
50%
75% down
single channel with 3 intermediate positions
learning button
back
75%
50%
25%
5. Percentage control
After code learning, press 25%,50%,75% to have percentage control.
.Channel Hiding8
MM
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9 10 11 12 13
M
1 2 3 4 5 6 7 8
9 10 11 12 13
S S S
short press UP or STOP or
DOWN to final confirm,
the screen will show ” “.
Press K1 and K3 simultaneously to enter
hiding mode. The screen will show "CS”.
Press K1 to hide channels. Press
K3 to show again.
16 M
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
16 M
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
16 M
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
01 M1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
16 M
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
06 M1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
06 M1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
01 M1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
down down down
02.Double channels
Power: Model:
-10℃ +60℃( )
3V CR2032
:-20℃ +60℃( )
:
Working Temperature
working temperature ~
~ emitter without screen
emitter with screen
Currency:≤16mA
Code:rolling code
Frequency:433.92MHz
Long press K2 for 2 seconds to
enter multi-channel control mode.
The current channel will shine on
the screen.
Press K1 or K3 to choose a channel
and press K2 to confirm.
After choosing channels, press UP or STOP
or DOWN to final confirm. Now you can
control the channels together.
Long press K2 for 2 seconds to enter
multi-channel mode. The current
channel will shine on the screen.
Press K1 or K3 to choose the
channel that you want to cancel.
Press K2 to cancel the channel. Do
same to the other channels.
Press UP or STOP or DOWN to final confirm.
Now the channels are canceled.
Press UP and DOWN simultaneously once. Press STOP once. Code learning is done.
Repeat the operation to the other channel.
16 1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Press K1 or K3 to choose a channel.
The screen will show the channel
that is chose
Press UP and DOWN once
simultaneously.
Press STOP once. The code learning
is done. Repeat the operation to
other channels.
03 03
11.03.03.SMS-RE1101/1104YT-V1
RE1101-1104 series instruction
10.Smart position Function (for RE1104、RE1104-i )only
Press K2 to shift to the timing setting that you want to close.
To save energy and prolong the using time of the emitter, we advise you press 0.5S and press in 1s interval.
Short press K2 to enter smart position mode.
9.Emitter With Timer Function
04.timing channel hiding
05.Stopwatch function
Press K1 to enter time mode. The
hour figures will shine. Press UP or
DOWN to set.
Press K1 again. The minutes will
shine. Press UP or DOWN to set.
Press K1 again. The weekend will shine.
Press UP or DOWN to set.
Press STOP to final confirm.
Press K2 to enter timing mode. There will be . you can set at most 16 open&close time.Press K2 to shift between them.
Press K2 to enter timing mode. Press K2 again to number the
timing setting. You can number
it by 1,2,3...16.
Press K3 once to activate time setting. Press K3 again to choose channel.
After choosing the channel, press K1
to set time. Please refer to “01 time
setting” to check how to set time.
If you want to set more timing, press K2 to start again.
When you finish setting, press
STOP to final confirm.
03.Close timing
Press K2 to enter timing mode. Long Press K3 until the screen shows as above. The timing is closed. PressK3 again to restore.
When you finish, press STOP to final confirm.
Press K1 and K3 simultaneously to enter
hiding mode. The screen will show “CS”.
Press K1 to hide channels.
Press K3 to show again.
Short press UP or STOP or DOWN to
final confirm. The screen will show“ ”.
Hide the timing function until there
is only one channel. Press K3 to enter stopwatch mode.
Press K3 to final confirm.
when you have timing setting, be sure there is a clock on the screen. Otherwise it will be invalid. You can get quick access to timing mode by long press STOP and press K2 once.
The emitter stops work when battery is used up. Please change battery.
01. single smart position mode
Note: please set the limit before using smart position.
Short press K2 to enter smart position mode. Press K2 again to choose a channel. Press K1 or K3 to control the percentage. The blinds will stop at the position according
to the percentage.
01. Multi-channel mode
Choose a channel referring to 6 Multi-channel control (screen emitter) .
Press K1 or K3 to control the percentage. The blinds will stop at the position according to the percentage.