RDSO SPECIFICATION FOR IP BASED CLOSED CIRCUIT …

Page 1 of 33 Effective from 24/04/2019 RDSO/SPN/TC/106/2019 Rev.Version 12.0

RDSO SPECIFICATION

FOR

IP BASED CLOSED CIRCUIT TELEVISION (CCTV) SURVEILLANCE SYSTEM IN COACHES OF INDIAN

RAILWAYS

SPECIFICATION NO.: RDSO/SPN/TC/106/201921

ReviVersion 12.0

Number of Pages: 21

TELECOM DIRECTORATE RESEARCH DESIGNS & STANDARDS ORGANISATION

LUCKNOW-226011


DOCUMENT DATA SHEET

Title of Document

RDSO Specification of IP based Closed Circuit Television (CCTV) Surveillance

System in Coaches of Indian Railways

Specification no.

RDSO/SPN/TC/106/201921

:

ReviVersion

12.0

Author

Director/Telecom-II/RDSO

:

Approved by

Executive Director/Telecom-I/RDSO

:

Abstract

This document specifies technical specification of IP based Closed Circuit Television (CCTV) Surveillance System in Coaches of Indian Railways


DOCUMENT CONTROL SHEET

NAME

ORGANIZATION

FUNCTION

LEVEL

Director/Telecom-II

RDSO Member Prepare

Executive Director/ Telecom-I RDSO - Approve

REVISIONS:

Version

Chapter/ Annexure

Revision

Effective

Month / Year

RDSO/SPN/TC/106/2018 - Revision 0.0 FIRST ISSUE

March, 2018

RDSO/SPN/TC/106/2019 All Pages

Revision 1.0

April, 2019

RDSO/SPN/TC/106/2019 Required/

Relative Pages Amendment 1.0 January, 2020

RDSO/SPN/TC/106/2021 All Pages

Version 2.0

____, 2021


TABLE OF CONTENTS

S. No. Items Clause No. Page No.

1. Scope 1.0 6

2. System Description 2.0 6 3. General Requirements 3.0 7

4. Technical Requirements: 4.0 11

Fixed Dome Type IP Colour Camera 4.1 911

Video Recorder Unit 4.2 1013

Managed PoE Ethernet Switch 4.3 1214

Wi-fi Access Point 4.4 1315

Mobile Network Video Recorder (Mobile NVR) 4.5 1316

System Software 4.6 1517 Face Recognition Software 4.7 1719

Server Hardware (Data Centre): 4.8 1720

Various types of Cables 4.9 1821

Command Control Centre Software 4.10 21

5. Software License 5.0 1821

6. Test Requirements 6.0 1921

7. Making and Packing 7.0 2124

8. Information to be supplied by the Purchaser 8.0 2124 9. Drawings for standard fixing protocol for installation of

CCTV system.

9.0 26


I. SUMMARY:

This document covers the technical requirements of IP based Closed

Circuit Television (CCTV) Surveillance System in Coaches of Indian Railways.

II. SOURCE:

1. Specification RDSO/SPN/TC/106/2018, Revision 0.0 was prepared by RDSO, Lucknow as per Railway Board‟s letter no. 2017/Tele/3(1)/1/CCTV, dated 07/11/2017.

2. Specification RDSO/SPN/TC/106/2019, Revision 1.0 has been

prepared by RDSO, Lucknow based on comments received from RAILTEL through Railway Board and Industries.

3. Specification No. RDSO/SPN/TC/106/2021, Version 2.0 has been

prepared by RDSO, Lucknow as per DG/RDSO letter No. DG/Misc. dated 04.12.2019 and 10.06.2020, Indian Railways D.B. Task ID:

3857, dtd. 04.12.2020, and comments received from industry.


Specification of IP based Closed Circuit Television (CCTV) Surveillance System in Coaches of Indian Railways

RDSO Specification No. RDSO/SPN/TC/106/2019, Revision 1.0

1.0 SCOPE:

The Specification of IP based Closed Circuit Television (CCTV) Surveillance System in Coaches of Indian Railways covers technical

specification and requirement of IP based CCTV Surveillance Systems in Coaches consisting of Fixed Dome IP colour Camera, Video Recorder Unit, Mobile NVR, System Software, Managed PoE Ethernet Switch either standalone or in built and Wi-fi Access Point either standalone or in built

etc. for Surveillance in Coaches of passenger trains of Indian Railway.

2.0 SYSTEM DESCRIPTION:

2.1 Each Coach shall be installed with tentatively 8 nos. of Cameras. 4 nos. of Cameras shall be installed in doorways, 1 no. of camera facing each Vestibule portion and 2 nos. of Cameras shall be installed in aisle area. Each Camera shall be enabled with tampering alarms.

Note: The above scheme is tentative and no. of cameras may vary as per type of

Coaches or as specified by the purchaser.

2.2 Each Coach shall be provided with a Video Recorder Unit or Mobile Network Video Recorder (Mobile NVR) along with System Software.

2.3 The Video and Tampering Alarm data of Cameras shall be stored in the

Video Recorder Unit/ Mobile NVR for at least 30 7 days at 25 FPS with Full HD resolution with H.265 or higher Video Compression and a secondary stream shall be saved for at least 30 days at HD/SD resolution or higher.

2.4 Each Coach shall be provided with Wi-fi Access Point and 5G / LTE (4G),

3G for connecting the Video Recorder Unit/ Mobile NVR to the Data Centre/Centralized location/Cloud. Video Recorder Unit /Mobile NVR

should be provided with GPS module for GPS applications within the housing as specified in clause 3.2016.

2.5 The Cameras and Video Recorder Unit / Mobile NVR of running trains

shall be accessible on real time basis through available Wi-fi and 5G / LTE(4G)/3G network as and when required from Data Centre / Centralized locations / Clients for Viewing and Monitoring and Alarms.

2.6 It shall be possible to transmit the Alarms generated by Video Recorder Unit / Mobile NVR of running trains and prompt to Data Centre / Centralized locations on real time basis through the available Wi-fi and 5G / LTE(4G)/3G network.


2.7 (i) There shall be provision of Panic Button / Buttons in each Coach. Pressing Panic Button shall provide local buzzer as well as alarm to the Data Centre / Centralized location through available network for CCTV application.

(ii) No. of Panic Buttons and its suitable location shall be decided by the

purchaser as per requirement.

(iii) Panic button alarms, Camera tampering alarms and FRS blacklist alarms (presence of blacklisted person) should be sent to DC / DR / Designated Central Monitoring Location in real time subject to the connectivity through 5G / LTE (4G) / Wi-Fi. Operator at DC / DR or

Command Control Centre shall be able to alert selected RPF Thana / stations / Authorized person(s) for taking appropriate action. Authorized / registered mobile phone user(s) on Coaches should be able

to record incident from their registered mobile phones and upload the video to the Central Datacenter / Command & Control Centre.

2.8 Standard fixing protocol for installation of CCTV system:

The drawings to be followed for following type of coaches are as follows:

S.N. Drawing No. Type Variant Type of Coach

1. CG-18229 LHB, AC LWFAC, LWACCN/LWACCW, LWLRRM, LWSCZAC/LFCZAC

2. CG-18230 LHB, NON AC GS, LWSCN, LWSCZ, LDSLR

3. CG-18231 ICF AC WGFAC, WGACCW, WGACCN, WGSCZ

4. CG-18232 ICF NON AC SLRD, GS, SDC, WGSCN

5. ICF/SK3-9-0-248 (Sheet 1&2)

EMU & MRVC Coaches

6. ICF/SK3-9-0-171

3-Phase Air-conditioned EMU Coaches

Note: For other types of coaches, based on the requirement, Railways may

procure cameras and other associated accessories as per this RDSO specification and may decide the standard fixing protocol for installation of CCTV system in consultation with concerned Directorate (Carriage/EMU) of RDSO and with approval of the competent authority.

3.0 GENERAL REQUIREMENTS:

3.1 The Closed-Circuit Television (CCTV) Surveillance System shall be end to

end IP (Internet Protocol) based. 3.2 The Video Surveillance system shall be based on non-proprietary open

architecture where the System Software can work and integrate with any

make of IT hardware.


3.3 Profile „S‟ defines interoperability between Video Management

Software/NVR and Camera.

The System i.e. Mobile NVR, IP cameras and System Software shall be compliant to global standards ONVIF Profile „S‟ for the interface of network video product (ONVIF – Open Network Video Interface Forum). The quoted camera models should appear on the ONVIF conformant products

under Device List & quoted Video Management Software/Mobile NVR should appear under conformant Client List on the ONVIF website and a confirmation certificate for the offered models should be available at the time of supply. It should be confirmed from ONVIF Website at the time of

supply while offered for inspection. In case ONVIF „S‟ certifications is not available, then to fulfill requirement of interoperability between Video Management Software / NVR and

Camera, certification from Indian bodies i.e. TEC / TSEC, STQC, BIS or any accredited lab by them or any other Government / NABL accredited lab, is a mandatory requirement to be submitted by the OEM / Vendor at the time of supply while offered for inspection.

Software Development Kit (SDK) of all Hardware is to be shared with the purchaser for integration purposes.

3.4 The Railway Track / Stations / EMU Shed / Stabling Line / Washing Line / Coaching depot may be provided with the high-speed Wi-fi or 5G / LTE(4G), 3G network. The Video Recorder Unit / Mobile NVR shall have capability to automatically transmit the required data (video / face images /

alarms etc.) from the Coaches to the Data Centre / Divisional Control / Cloud on getting connected automatically to available Wi-fi or 5G / LTE (4G)/ 3G network.

3.5 If Required Data is not offloaded instantaneously through available Wi-fi network and/or 5G / 4G/3G network completely at first Station due to short stoppage time or network outage, it is required that timestamps are maintained in order to avoid duplication in transmission of data at next

station(s). 3.6 In case of any disconnection / disruption in transmission of data, the Video

Recorder Unit / Mobile NVR shall be able to resume the transmission

when network gets connected without any duplication of the Video data in the Data Centre / Centralized location / Cloud.

3.7 Video Recorder Unit / Mobile NVR installed in individual Coaches shall be

provided with unique digital identification number. This shall be used as key identifier for Video Recorder Unit / Mobile NVR while communicating to Data Centre / Cloud through Wi-fi link or 5G / LTE (4G), 3G network. It shall be possible to change identification number of Video Recorder Unit /

Mobile NVR as per requirement while adding or deleting the coaches in train-set.


3.8 Central Management System (CMS)Command Control Centre (CCC)

Software including VMS shall be deployed in Datacenter / Centralized Location / Cloud or any other location as specified by the purchaser.

Centralized ManagementCCC Servers with 1N:1 redundancy (N is to be defined by the purchaserHA mode) in Datacenter / Centralized Location / Cloud shall be provided. CMS CCC shall maintain a mapping of all train coaches and their respective Video Recorder Unit / Mobile NVR

associated with coach. Once an alert is generated, Central Server shall help in escalating a particular event to RFP‟s / Thana Posts using GPS location of the train.

3.9 Central Management System shall have a dashboard to display status of all requests pertaining to video footage by various RPF Thana/Post. CMS shall also provide a dashboard to respective RPF Thana/Post displaying status (in-progress/completed) of the requests created by that RPF

Thana/Post. 3.910 On reception of incident from RPF Thana / Post, Central Server shall

create an entry & will be responsible for fetching the recordings related

with the incident from the respective Train Coach-Video Recorder Unit / Mobile NVR once it becomes live in the network. Subsequently, system should send an alert and it should change the state from in-process to close state and an acknowledgement to be shared to the RPF Thana /

Post. 3.101 Once the RPF Thana / Post sees completed status in the dashboard

against a particular request, they should be able to view the required video

footage. Client at RPF Thana / Post should also have the facility to flag / mark indicating the duration (time period) for which the video footage need to be retained along with justification / remarks for the same. System shall also display the list of video footage with details e.g. date, duration, video

recording unit, train no., video file size) being stored for long term retention as desired by RPF officials.

3.112 The Video data at Data Centre / Cloud shall be accessible to any other

centralized location or other clients through MPLS / IP network as per requirement of purchaser for Viewing and Monitoring.

3.12 The equipments shall be able to work in the temperature range and

humidity as specified in the corresponding clauses of the specification. Purchaser may specify any other temperature requirement and humidity as per site requirement.

3.13 The Video Recorder Unit / Mobile NVR shall provide secured recording for evidence purposes and user authentication to protect data integrity. Necessary provisions for Cyber Security required for the system at different levels shall be implemented based on the latest technology and

as specified by the purchaser. To ensure security of IP based CCTV in Coaches of Indian Railways (Camera & Software) from vulnerabilities &


breaches and discourage false undertaking from OEMs, security auditing and testing of equipment including source code of camera and software shall be carried out from STQC (Ministry of Electronics & Information Technology) or any other Government Agency from the list of CERT-In

empanelled Information Security Auditing Organization. In order to ensure security of network and other IT equipment of VSS system, before bulk supply and installation, purchaser should ensure that security auditing and testing at the time of POC (Proof of Concept) as well as at the time of

completion of project are conducted or as specified by the purchaser. In case any security breach is found in the system at any stage including at POC level, immediate strict penal action is to be initiated by the purchaser.

3.14 OEMs must submit a declaration certificate regarding their genuinity, have their own manufacturing setups and IPR for the hardware(s)/software(s), and shall not have 3rd party manufacturing from any company blacklisted in India or abroad (due to proven backdoor access and data vulnerability)

or any company sharing land border with India. The Intellectual Property Rights (IPR) of all manufactured final product and source code of all software including camera firmware, switch firmware, FRS algorithm, Command Control Centre Software etc. should not reside in countries

sharing land borders with India, until unless specifically allowed by the Government of India and is registered with the Competent Authority of Government of India. Proof of IPR & source code residing in which country and requisite permission & registration with Competent Authority of Govt.

of India, as applicable to comply with the above, shall be provided by the OEMs. The purchaser should ensure that latest Public Procurement Policy & other related orders issued by Government of India are followed. In case any breach or false declaration is found at any stage, immediate strict

penal action is to be initiated by the purchaser. 3.15 OEM need to confirm that the equipment, like Cameras etc., shall not be

installed with standards like - GB28181, GB/T28181-2011, GB/T 28181-

2011, GBT 28181-2011, GBT28181-2011, GB/T28181-2016, etc., protocols / standards and there shall be no option in the camera web page / settings to activate or deactivate such protocols / standards any of their version(s) or any such protocol which allow certain organizations to

bypass all security parameters and look into the devices directly. 3.16 The MAC address of all cameras should not be registered in the name of

any OEM / company / entity sharing land border with India until unless

specifically allowed by the Government of India. 3.17 Mean Time Between Failure (MTBF) calculated at 40°C for each type of

camera should not be less than 1,00,000 hours for which OEM shall

submit complete and detailed test reports issued from Govt. / NABL Accredited Test Labs / 3rd party test house of International repute such as UL, TUV etc.

3.184 The power available in the Coach for Train lighting is 110V DC / 110V AC (nominal). A Suitable Power Supply Unit conforming to EN 50155/ IEC


60571 (For Temperature, Humidity, Vibration and BIS/UL/EN/IEC/BIS/CE/FCC as applicable for Safety and EMI/EMC) for Rolling Stock application shall be provided by the supplier to operate Video Recorder Unit / Mobile NVR, Wi-fi Access Point and Managed PoE

Ethernet Switch. 3.195 The Cameras shall be installed and fixed on Coach Ceiling. The

equipments viz. Video Recorder Unit / Mobile NVR, Wi-fi Access Point, 5G

/ LTE(4G), 3G Mobile communication equipment, GPS Module, Managed PoE Ethernet Switch and Power Supply etc. and other accessories shall be housed in concealed, powder coated metal enclosure with suitable Ingress Protection for dust and water by providing gasket & sealing of

cable entry / exit along with suitable lock and key as specified by the purchaser.

3.2016 The dimension of metal enclosure shall be within

400(L)x300(B)x200(H)mm approximately so as to house the equipments in such a way that maintenance can be done without any difficulty. The metal enclosure should be such that it is able to dissipate heat generated by equipments.

3.21 There shall be provision to view any camera from the Divisional, Zonal

Headquarters and from the Railway Board at the time of emergency or whenever desired.

4.0 TECHNICAL REQUIREMENTS:

The technical requirements of different components shall be as below: 4.1 Full HD Fixed Dome type IP Colour Camera:

The camera shall have the following minimum specifications:

S.

No.

Parameter : Specification

i. Image Sensor : 1/ 2.8“ or larger, Progressive scan, CMOS Sensor

ii. Video Compression : H.265 Streams or higher

Audio Compression G.711/G.722/G.726/AAC or similar

iii. PixelsResolution and Frame Rate

: 2.0 Mega Pixel Full HD (1920x1080) resolution and 25 frames per second (FPS)

iv. Minimum Illumination : 0.3 Lux (Colour)

v. Lens : Focal Length 2.8 mm or larger, IR corrected, 1 m minimum object distance, Auto IRIS

Control suitable for Full HD Dome type IP Colour Camera.

vi. Infra-Red : Built-in Infra-Red Illuminator with range 10 m or more

vii. Wide Dynamic Range : ≥ 120 90 dB


viii. Network Connectivity & PoE : Ethernet, 10/100 Base T, IEEE 802.3af/at PoE compliant with M12/M23 connector

ix. Video Streaming : Unicast and Multicast streams

x. Streaming Capability : Three (3) H.265 or higher Streams

xi. Video resolutions : a) For Main stream:

i)1920x1080 (Full HD). ii)Configurable from Full HD to other HD/SD resolutions. b) For Second Stream: Configurable from

Full HD to other HD/SD resolutions or Configurable form HD to D1 resolution. c) For Third Stream: VGA or CIF or QVGA or

QCIF resolutions. xii. Resolution and Frame Rate : Full HD @ 25 FPS with H.265 or higher

compression on one stream. FHD / HD / D1 @ 25 FPS with H.265 or higher compression on 2nd stream. VGA or CIF or QVGA or QCIF @ 15 FPS

with H.265 or higher compression on 3rd stream.

xiii. Data Rate : Shall work on 3 Mbps bit rate or less average for Full HD@ 25 FPS at Variable bit rate (VBR) on individual (Single) stream with

H.265 or higher Video Compression. The camera shall also support Constant Bit Rate (CBR).

x.xiv. Discovery Interface : OEM interface to detect the camera automatically and configure network settings

xi.xv. Network Protocols

: Suitable and required network protocol stack to work Camera in TCP/IP based Ethernet

network environment. (As required for system working)

xii.xvi. Web Server : Internal Web server required with embedded operating system.

xiii.xvii. Activity controlled video recording

: During periods of negligible motion, the recording bits rate shall drop and when motion occurs, the recording bit rate shall

return to normal without any perceptible delay.

xiv.xviii. MAC Address : The MAC address of the IP cameras must be registered in the name of OEM supplying the Cameras.

xix. MTBF : Mean Time Between Failure (MTBF) calculated at 40°C should not be less than

1,00,000 hours.

xv.xx. Operating Temperature : 0°C to +50°C or as specified by the purchaser

mailto:D1@[email protected]


xvi.xxi. Humidity : 20% to 80% RH, Non-condensing or as specified by the purchaser

xvii.xxii. Ingress Protection : IP 66 67 or higher

xviii.xxiii. Vandal Proof Casing : IK10 8 or higher

xix.xxiv. Regulatory Approvals/ Certifications

: a) BIS / EN 50155/IEC 60571 for Rolling Stock application for Temperature, Humidity and Vibration.

b) BIS/UL/EN/CE/IEC/BIS for Equipment

Safety and BIS/EN/IEC/CE/FCC/BIS for EMI & EMC

c) ONVIF Profile „S‟ for the interface of network video product (ONVIF – Open

Network Video Interface Forum) or interoperability compliance as per clause no. 3.3.

c)d) SDK is to be shared with the

purchaser for integration purpose. Note: 1) For BIS/EN/IEC/UL/IS/CE/FCC, test

certificate to be provided from internationally

reputed and accredited test Labs/agencies or NABL/NABCB accredited Labs. 2) BIS/EN/IEC Standards for Temperature, Humidity, Vibration and EMI/EMC which are

part of EN 50155 or IEC 60571 are also applicable as EN 50155 / IEC 60571 Certification.

xxv. Security Verification Certification

: The Full HD Fixed Dome type IP Colour Camera shall have security features which can be deployed meeting the security

assurance requirements as per relevant clauses / paras mutually decided by Purchaser & STQC (or other Govt. agency as per note below) regarding “Appendix C of

OWASP: Internet of Things Verification Requirements” of OWASP Application Security Verification Standard version 4.0 - Level 2 for CCTV with relevant and

equivalent safeguards. Note: The Regulatory Approvals / Certifications are to be provided from STQC

(Ministry of Electronics & Information Technology) or any other Government Agency from the list of CERT-In empanelled Information Security Auditing Organization.


4.2 Video Recorder Unit:

The Video Recorder Unit shall have the following minimum specifications or otherwise as specified by the purchaser:

S.

No.

Parameters : Specifications

i. Processor* Latest generation x86 Intel/ AMD Processor.

ii. No. of Cores* : 4 Core

iii. Hardware Platform : PC

iv. Operating System : Windows or Linux

v. Camera type which is required to be supported

: 8 Nos., IP 2 Mega Pixel Full HD (1920x1080) Camera

vi. Storage : HDD/SSD of minimum 8 TB Capacity.

vii. GPS Module : Inbuilt or external (within the housing as per clause no. 3.20) GPS Module

viii. Mobile Communication : Inbuilt or external (within the housing as per clause no. 3.20) 5G / LTE(4G), 3G Mobile communication with standard SIM Card slot

with external antenna ix. Wi-fi Access Point : Inbuilt Wi-fi Access Point as per IEEE 802.11

b/g/n or 802.11 ac with 23 dBm or higher Antenna or External Wi-fi Access Point as per Clause

no.4.4

x. 10/100 Base T Ethernet

Interface

: 8 nos. or more 10/100 Base T, IEEE

802.3af/at compliant PoE with M12/M23 connector or External Managed PoE Ethernet Switch as

per Clause no. 4.3

xi. 10/100/1000 Base T Ethernet Interface

: As required for External Wi-fi Access Point and External Managed PoE Ethernet Switch with M12/M23 connector

xii. Video Output/ Interface (optional)

: HDMI/VGA/BNC

xiii. I/O Interfaces : USB Port and/or, Serial Interface

xiv. Operating Temperature : 0°C to +50°C or as specified by the purchaser

xv. Humidity : 20% to 80% RH, Non-condensing or as specified by the purchaser

xvi. Regulatory Approvals / Certifications

: a) BIS / EN 50155/IEC 60571 for Rolling Stock application for Temperature,

Humidity and Vibration.


b) BIS/UL/EN/IEC/BIS for Equipment Safety and BIS/EN/IEC/CE/FCC/BIS for

EMI & EMC Note: 1) For BIS/EN/IEC/UL/IS/CE/FCC, test

certificate to be provided from internationally reputed and accredited test Labs/agencies or

NABL/NABCB accredited Labs. 2) BIS/EN/IEC Standards for Temperature, Humidity, Vibration and EMI/EMC which are part of EN 50155 or IEC 60571 are also

applicable as EN 50155 / IEC 60571 Certification.

*Note: In case the VRU has embedded system architecture with system on Chip (SOC) and microprocessor together, deviation can be accepted if full functionality is achieved.

4.3 Managed PoE Ethernet Switch:

The PoE Ethernet Switch shall have the following minimum specifications or

otherwise as specified by the purchaser:

S. No.

Parameters : Specifications

i. No. of Ports : 8 Ports or more

ii. Ethernet Ports : a) 8 nos. or more 10/100 Base T, IEEE

802.3af/at compliant PoE with M12/M23 connector

b) 02 No. 10/100/1000 Base T Ethernet interface with M12/M23 connector

iii. Power Supply : The switch should be able to work on power provided as per clause 3.1814.

iv. Operating Temperature : 0°C to +50°C or as specified by the

purchaser v. Humidity : 20% to 80% RH, Non-condensing or as

specified by the purchaser

vi. Regulatory Approvals / Certifications

: a) BIS / EN 50155/IEC 60571 for Rolling Stock application for Temperature, Humidity and Vibration.

b) BIS/UL/EN/IEC/BIS for Equipment

Safety and BIS/EN/IEC/CE/FCC/BIS for EMI & EMC

Note: 1) For BIS/EN/IEC/UL/IS/CE/FCC, test

certificate to be provided from internationally reputed and accredited test Labs/agencies or NABL/NABCB accredited Labs. 2) BIS / EN/IEC Standards for Temperature,

Humidity, Vibration and EMI/EMC which are part of EN 50155 or IEC 60571 are also



4.4 Wi-fi Access Point:

The Wi-fi Access Point from train to ground link shall have following minimum specifications or otherwise as specified by the purchaser:

S.

No.


i. Ethernet Port : 10/100/1000 Base T auto-sensing

ii. Wi-Fi network : IEEE 802.11 b/g/n or 802.11 ac

iii. Wi-Fi mode : Access point

iv. Output Power : The maximum radiated power should be as specified by the WPC.

v. Input Voltage : Should be able to work on power provided as per clause 3.1814.

vi. Ingress Protection : IP 66 67 or higher

vii. Operating Temperature : 0°C to +50°C or as specified by the purchaser

viii. Humidity : 20% to 80% RH, Non-condensing or as specified by the purchaser

ix. Regulatory Approvals / Certifications

: a) BIS / EN 50155/IEC 60571 for Rolling Stock application for Temperature, Humidity (20% to 80% RH, Non-

condensing) and Vibration. b) BIS/UL/EN/IEC/BIS for Equipment

Safety and c) BIS/EN/IEC/CE/FCC/BIS for EMI & EMC


certificate to be provided from internationally reputed and accredited test Labs/agencies or

NABL/NABCB accredited Labs. 2) BIS/EN/IEC Standards for Temperature, Humidity, Vibration and EMI/EMC which are part of EN 50155 or IEC 60571 are also


4.5 Mobile Network Video Recorder (Mobile NVR):

The Mobile Network Video Recorder shall have the following minimum specifications:

S. No.


i. Channels : Minimum 8 nos.

ii. Processor* : Latest generation x86 Intel/ AMD Processor


iii. Operating System : Embedded Windows or Linux

iv. Camera type which is required to be supported

: IP 2 Mega Pixel Full HD (1920x1080)

v. Recording Resolution and

Frame Rate

: Full HD (1920x1080) @ 25 FPS

vi. Supported Image Resolution : SD, HD and Full HD resolution

vii. Compression

a)Video : H.265 or higher b) Audio : G.711/G.722/G.726/AAC or similar

viii. Recording Bandwidth (Max.) : 64 Mbps

ix. Storage : HDD/SSD of minimum 8 TB Capacity. x. Network Protocols : Suitable and required network protocol stack

to work Camera in TCP/IP based Ethernet network environment. (As required for system working)

xi. Discovery Interface : OEM interface to detect the camera automatically and configure network settings

xii. GPS Module : Inbuilt (within the housing) GPS Module

xiii. Mobile Communication : Inbuilt (within the housing) 5G / LTE(4G), 3G Mobile communication interface with standard SIM Card Slot

xiv. Wi-fi Access Point : Inbuilt Access Point, IEEE 802.11 b/g/n or 802.11 ac with 23 dBm or higher Antenna

or External Wi-fi Access Point as per Clause no.4.4

xv. 10/100 Base T Ethernet Interface

: Inbuilt 8 nos. or more 10/100 Base T, IEEE 802.3af/at compliant PoE with M12/M23

connector or External PoE Switch as per Clause no. 4.3

xvi. 10/100/1000 Base T Ethernet Interface

: As required for External Wi-fi Access Point and External Managed PoE Ethernet Switch with M12/M23 connector

xvii. Video Output/ Interface

(optional)

: HDMI/VGA/BNC

xviii. I/O Ports : USB Port and/or, Serial Interface

xix. Software Features : Software features shall be as per Clause no. 4.6 of the specification

xx. Operating Temperature : 0°C to +50°C or as specified by the purchaser

xxi. Humidity : 20% to 80% RH, Non-condensing or as specified by the purchaser

xxii. Regulatory

Approvals/Certifications

: a) BIS / EN 50155/IEC 60571 for Rolling

Stock application for Temperature,


Humidity and Vibration. b) BIS/UL/EN/IEC/BIS for Equipment

Safety and BIS/EN/IEC/CE/FCC/IS for EMI & EMC


certificate to be provided from internationally reputed and accredited test Labs/agencies or NABL/NABCB accredited Labs. 2) BIS/EN/IEC Standards for Temperature,

Humidity, Vibration and EMI/EMC which are part of EN 50155 or IEC 60571 are also applicable as EN 50155 / IEC 60571 Certification.

*Note: In case the NVR has embedded system architecture with system on Chip

(SOC) and microprocessor together, deviation can be accepted if full functionality is achieved.

4.6 System Software:

The System Software shall have following minimum specifications or otherwise as specified by the purchaser:

4.6.1 Live display of cameras. 4.6.2 Recording of Video.

4.6.3 Playback of archived video. 4.6.4 Retrieval of archived video.

4.6.5 Configuration of system settings. 4.6.6 Configuration of Camera parameters.

4.6.7 The software shall support multiscreen display on monitors. 4.6.8 The system software shall have following recording features:

4.6.8.1 The Software shall support continuous recording, activity control recording, motion detection recording and Alarm and Trigger input recording etc.

4.6.8.2 In case Video Recorder Unit/ Mobile NVR operation is interrupted, like

power disconnection and once the Video Recorder Unit/ Mobile NVR is restarted, the Video Recorder Unit/ Mobile NVR shall automatically resume recording of cameras.

4.6.8.3 The system software shall support network fault-tolerant recording such that if the network connection between Video Recorder Unit and Camera


is unavailable, the Video Recorder Unit shall automatically recover when the connection is restored.

4.6.8.3 Search and Export: The system software shall support recording search by

camera, date and time, events etc. and support export of video clips to USB drives.

4.6.9 The system software shall maintain system log such as alarms, events

and operator log etc. 4.6.10 It shall be possible for Video Recording Unit/ Mobile NVR to transfer and

append the Video data to Server at Cloud/ Data Centre for the data if

demanded. 4.6.11 The system software shall support user management such as

authentication of user login, configuration of users and user access rights.

4.6.12 It shall be possible to access Cameras through Video Recording Unit/

Mobile NVR from Centralized location for diagnostic and management purpose.

4.6.13 Software such as Facial Recognition etc. as required by the purchaser

shall run on the Cloud/ Data Centre and it should be possible to send alarms to central location through available network.

4.6.14 It shall be possible for system to transfer event-based video footage to the

Data Centre/ Cloud through network during course of journey.

4.6.15 Camera Tampering (Camera Blinding) analytics shall be provided for each Camera. The Camera Tampering alert shall be sent over Wi-Fi or 5G / 4G (LTE)/3G network to Datacenter / Cloud.

4.6.16 Face image cropping tool shall run on 4 CCTV cameras installed at 4 entry/exit doors of each coach. Face image cropping tool on the camera and/or video recording unit/Mobile NVR shall identify the faces of person from the live feed and crop it which should meet the requirement of FRS.

This face image with the metadata shall be sent over Wi-Fi or 5G / 4G (LTE)/3G network to Face matching Server at Datacenter / Cloud for matching.

4.6.17 Security Verification Certification: The System Software shall have security features which can be deployed meeting the security assurance requirements as per Relevant clauses / paras to be applicable for security, vulnerabilities, etc. Such clauses / paras shall be mutually decided by

Purchaser and STQC (Ministry of Electronics & Information Technology) or any other Government Agency from the list of CERT-In empanelled Information Security Auditing Organization for testing and issuing the certificate / clearance.

4.7 Facial Recognition System:


The Face Recognition Software (FRS) shall be deployed on Servers at Data Centre/Cloud/Centralized location as specified by the purchaser with the following minimum requirements:

4.7.1 The Face Recognition Algorithm vendor should have participated and

have established in the latest Face Recognition Algorithm Evaluation conducted by NIST (National Institute of Standards and Technology, U.S.

Department of Commerce), Face Recognition Vendor Test (FRVT) 1: N Evaluation. The benchmarking parameters such as acceptable Error rate/Ranking in NIST report as applicable may be specified by the purchaser. Proof of concept trials/ demo may be asked by the purchaser

The NIST benchmark / latest performance FRVT test results of current calendar year with respect to the opening date of tender or last 1 preceding year, the performance efficiency of the algorithm shall be within the top 25 ranked algorithms of the FRVT (1:N) test results with FNIR

(N=1.6M, T=0, Rank=1). 4.7.2 FRS Central Database server as specified by the purchaser for Facial

Recognition system in High Availability (HA) shall be hosted in

Cloud/centralized location/Datacenter. 4.7.3 For processing of metadata generated from Video Recording Unit/Mobile

NVR configured based on coach (unique) number in train coaches,

adequate numbers of Face Matching Servers shall be provided at cloud/datacenter assuming a minimum load of 100 new faces per hour per coach. Central face matching engine shall have capability to process face matching request from the coaches sequentially with Queue management

and load balancing for the matching request. 4.7.4 Matching response shall be available on web-based application which can

be configured for individual users at railway stations, central location etc.

4.7.5 If the system detects any match then alerts carrying coach (unique)

number, frame of the detected person etc. shall be sent to the Command Control Centre and nearest RPF Thana/Post via shortest route calculation

using GPS location of the train through available Wi-Fi or 5G / 4G (LTE)/3G network.

4.7.6 The system shall be able work on moderate face rotation either horizontal

or vertical. It should support a yaw angle of -40 to +40 degrees, a pitch angle of -30 to +30 degrees and a roll angle of -20 to +20 degrees.

4.7.7 The system shall have in-built tool with capability to build partial faces and

enhancement of quality of image before enrolment. 4.7.8 The image Database Server shall support redundancy with N:1

redundancy configuration.

4.7.9 Security Verification Certification: The Face Recognition Software shall


have security features which can be deployed meeting the security assurance requirements as per Relevant clauses / paras to be applicable for security, vulnerabilities, etc. Such clauses / paras shall be mutually decided by Purchaser and STQC (Ministry of Electronics & Information

Technology) or any other Government Agency from the list of CERT-In empanelled Information Security Auditing Organization for testing and issuing the certificate / clearance.

4.8 Server Hardware (Data Centre):

Server hardware at Data Centre for FRS (Face Matching) and Central

Management System (including VMS) separately shall have the following

minimum specifications: S. No.


i. Processor : Latest Generation x86 Intel Xeon/ AMD Epyc Processor

ii. No. of Cores & No. of Processors

: Minimum 16 Cores in Single Processor or 2 nos. of 8 Core Processor (Dual Socket)

iii. No. of Threads : 2 Threads per Core

iv. Frequency : 2.1 GHz or higher

v. Memory : 32 GB or higher, DDR4 SDRAM or latest.

vi. Operating System : Windows Operating System or Linux, latest with required no. of Client licenses as specified by the purchaser.

vii. LAN/ Ethernet : Onboard/ on slot Gigabit Ethernet (RJ45) with Load Balancing and Fail over Support,

IPv6 compliant. viii. Interface type

: FC or iSCSI or SAS or FCoE or Ethernet

interface for connecting External Storage device.

ix. Disk Drive : Minimum 1.6 TB usable: Hot Pluggable Enterprise SATA HDDs / Hot Pluggable SSD or SAS (10000 RPM or higher for SAS)

HDD. Hot Pluggable SSD/ SAS HDD (10000 RPM or higher)

x. RAID Controller : RAID Controller with RAID 5 configuration.

xi. DVD R/W Drive & USB Ports

: DVD R/W Drive (internal) or USB 3.0 Ports

xii. USB/ PS/2 mouse and keyboard

: Required

xiii. Power Supply : Redundant Hot-swappable power supply

xiv. Fan configuration : Redundant Hot swappable Fan

xv. Chassis Type : 19” Rack mountable with sliding rails and fittings to install into a Rack.

xvi. Any other additional item which fulfills the FRS solution without affecting the FRS requirements.

xvii. Regulatory Approvals/ : BIS/UL/EN/CE/IEC/BIS certification for


Certifications Safety and BIS/CE/FCC Certifications for EMC & Immunity.

4.9 Various Types of Cables: 4.9.1 STP CAT-6 Cable:

Fire Retardant (as per IEC/EN 60332-1) STP (Shielded Twisted Pair)

CAT-6 Cable shall be compliant with latest EIA/TIA-568-B.2-1 standard for CAT 6 cable with Fire Retardant as per IEC/EN 60332-1.

4.9.2 Electrical Power Cable:

Electrical Cable used in the Coach for Video Surveillance System shall meet RDSO specification ELRS/SPEC/ELC/0019, Rev. 3 Feb. 2017(or latest Revision).

4.10 Command Control Centre Software:

Command Control Centre software shall be as per RDSO/SPN/TC/65/2021, Version 6.0 or latest.

5.0 SOFTWARE LICENSES:

Required number of Software licenses for Video Surveillance System in

Coaches shall be as specified by purchaser. The Licenses shall be of one-time type. Licenses related compliance shall be ensured by purchaser depending upon the requirement.

All software license(s) should be provided as Paper License in favor of purchaser / user.

6.0 TEST REQUIREMENTS:

6.1 Unless otherwise specified all tests shall be carried out at ambient

atmospheric conditions.

6.2 Inspection and testing shall be carried out to the effect that all

requirements of this specification are complied with.

6.3 Routine Test /Factory Acceptance Test (FAT): Routine test /Factory Acceptance test (FAT) shall be conducted by Original Equipment manufacturer (OEM) on every items/equipment and the test results shall be submitted to the inspection authority before inspection (Type Test and

Acceptance Test). 6.4 Regulatory Approvals/Certifications: All compliances to various standards

as given in specifications shall be submitted with documentary proof to the

inspection authority before inspection (Type Test and Acceptance Test). 6.5 TYPE TEST:


6.5.1 Cameras, Video Recorder Unit/ Mobile NVR and System Software along

with required accessories shall be considered as one system.

6.5.2 The following shall constitute the Type Tests which shall be carried out by the inspecting authority on randomly selected one system for the purpose of Type Test.

i) Visual inspection and Performance test

ii) Endurance test iii) Compliance of clause 3.14, 3.15, 3.16, 3.17 6.5.3 Visual Inspection and Performance Test: For Visual Inspection and

Performance test, equipment/system shall be tested to ensure compliance of relevant specification. The compliances to Regulatory Approvals/ Certifications shall be submitted with documentary proof.

6.5.4 Endurance Test: Endurance test shall be conducted on one complete system for continuous operation which shall be 72 hrs at ambient room temperature without giving any deterioration of equipment performance.

6.5.5 Test certificates along with test reports shall be submitted if the tests for Temperature, Humidity and Ingress Protection are already conducted on the equipment as per standards mentioned in the respective clauses of specification.

6.5.6 For Vibration, Equipment Safety, EMI/EMC, ONVIF Profile „S‟ or

interoperability and Vandal Proofing, test certificates along with test reports as per standards mentioned in the respective clauses of

specification shall be submitted. 6.5.7 Any other tests shall be carried out as considered necessary by the

inspecting authority. 6.6 ACCEPTANCE TEST:

6.6.1 The following shall constitute the Acceptance Tests which shall be carried

out by the inspecting authority for the purpose of acceptance on randomly selected of items.

i) Visual inspection and Performance test ii) Endurance test

iii) Compliance of clause 3.14, 3.15, 3.16, 3.17 6.6.2 Sampling Plan: The Sampling Plan for Acceptance test shall be as under:

Quantity offered (Lot Size) Sample size

2 to 8 2

9 to 15 3

16 to 25 5

26 to 50 8


51 to 90 13

91 to 150 20

151 to 280 32

281 to 500 50

501 to 1200 80

1201 to 3200 125

3201 to 10000 200

10001 to 35000 315

35001 to 150000 500

150001 to 500000 800

500001 and over 1250

6.6.3 For various types of cables as per clause no. 4.9, Acceptance test shall be

carried out on randomly selected 10% of items offered from the lot.

6.6.4 Visual inspection and Performance test: For Visual Inspection and

Performance test, equipment/system shall be tested to ensure compliance of relevant specification. The compliances to Regulatory

Approvals/Certifications as applicable shall be submitted with documentary proof which is enumerated below: i) BIS/EN 50155/IEC 60571 for Rolling Stock application ii) BIS/UL/EN/CE/IEC/BIS for Equipment Safety

iii) BIS/EN/IEC/CE/FCC/BIS for EMI & EMC iv) ONVIF Profile „S‟ or interoperability

6.6.5 Endurance test: Endurance test shall be conducted on randomly selected

samples for continuous operation which shall be 48 hrs at ambient room temperature without giving any deterioration of equipment performance.

6.6.6 Face Recognition Software: The Face Recognition Software shall be

tested for its performance as per clause no. 4.7 along with required no. of Cameras and other required devices & equipments.

6.6.7 Any other tests shall be carried out as considered necessary by the

inspecting authority. 7.0 MARKING & PACKING:

7.1 The following information shall be clearly marked at a suitable place on each equipment:

i) Make and Model/Part No. of Equipment ii) Serial number of equipment

7.2 The equipment and its sub-assemblies shall be packed in suitable packing

so that it can withstand bumps and jerks encountered during transportation.


8.0 INFORMATION TO BE SUPPLIED BY THE PURCHASER:

The purchaser shall clearly indicate details/requirement of items which

shall mainly consist of following items:

S. No.

Description Clause No. Quantity

i. POC parameters to be defined and included along with other policy / Govt. Orders / Letters.

3.13 To be included / defined / ensured by the purchaser

i.ii. Fixed Dome Type IP Colour Camera 4.1 As specified by the purchaser

ii.iii. Video Recorder Unit / Mobile NVR

with inbuilt/external units for PoE ports, Wi-Fi access point, GPS module, mobile data communication with Standard SIM slot

4.2, 4.3, 4.4,

4.5

As specified by the

purchaser

iii. Managed PoE Ethernet Switch As specified by the purchaser

iv. Wi-fi Access Point As specified by the

purchaser v. Mobile NVR As specified by the

purchaser

vi. System Software As specified by the purchaser

vii.iv. 1. Face Recognition Software (Acceptable benchmarking performance parameters to be specified by the purchaser).

2. Data Base server for FRS data

4.7 As specified by the purchaser

N:1 redundancy configuration for image Database Server redundancy

As specified by the purchaser Note: N shall be 1 in case of

only mirroring required & N shall be more than 1 in case failover system

viii.v. Server Hardware (Data Centre) & N:1 redundancy

4.8 As specified by the purchaser

ix.vi. STP CAT-6 Cable 4.9.1 As specified by the

purchaser x.vii. Electrical Power Cable 4.9.2 As specified by the

purchaser

viii. Command Control Centre Software 4.10 As specified by the purchaser

xi. Software License As specified by the purchaser


xii.ix. Panic Button/Buttons 2.7 As specified by the purchaser

x. Security Verification Certification 4.1 (xxiv),

4.6.17, 4.7.9

As specified by the

purchaser. (Relevant clauses / paras to be applicable for security,

vulnerabilities, etc. shall be mutually decided by Purchaser and STQC)

xiii. Sets of Technical Manuals As specified by the purchaser

xiv. Any other item(s) required for Video

Surveillance System.

As specified by the

purchaser Note: Detailed warranty clause as required shall be specified by the purchaser. Any

maintenance requirement shall also be specified by the purchaser.

-x-x-x-


9.0 Drawings for standard fixing protocol for installation of CCTV system as per clause no. 2.8:







-x-x-x-

Documents

RDSO SPECIFICATION FOR IP BASED CLOSED CIRCUIT …