RCPRCEDF

More productivity in the concrete process.Reinforcement technology from Wacker Neuson.

Reinforcement technology

RCE

Innovations that speed up the concrete process. Reinforcement technology from Wacker Neuson.

REINFORCEMENT TECHNOLOGY RETHOUGHT.

"I could only imagine it in part until I experienced it in reality: Accurately and safely cutting and bending reinforcing steel on site, that much was clear. But connecting reinforcing rods with up to 1,000 evenly twisted and fixed knots per hour with just one hand, that is the convincing advancement of Wacker Neuson."

Tomek PiesiewiczConcrete construction technician, Poland

2_3

Guarantees increased efficiency and safety on the construction site.

The robust and electro-hydraulic operated RCP / RCE simply cut better on both large and small sites – especially compared to cutting torches and right angle grinders.

They bend and cut more economically, safely and efficiently. No flying sparks are produced and extremely loud working noises are a thing of the past. In addition, they provide a great deal of safety for the operator and entire team.

RCE series:

- High quality shear head with a high cutting performance.- For reinforcing steel with diameters from 16 to 25 mm.- Opening of relief valve without a tool.

RCP Line:

- High cutting performance.- Interchangeable head system for cutting and bending.- Two cutting head systems: Wedge and shear cutting head.- Different holding positions.- For reinforcing steel with diameters up to 32 mm.- Opening of relief valve without a tool.

RCP 20

RCPRCE

Cut and bend reinforcing steel safely and economically:With the rebar cutting and bending machines RCP and RCE.

RCE 16

RCP 16

RCP 20

Change cutting and bending heads in 5 easy steps:

Loosen the clamp of the cutting head.

Loosen the screws to remove the cutting block from the cutting piston.

Replace the cutting headwith the bending head.

Put the clamp back on. Fasten the clamp.

4_5

Shear cutting head RCP 20 with relief valve Bending head RCP 20 Wedge cutting head RCP 16

1 2 3 4 5

Efficient use, first-class result.

Tried and tested twin wire technology for up to 1,000 evenly twisted and fastened knots per hour. Working with pliers in a bent over position and with a constantly overstrained wrist is history.

An immediately understandable professional device for traditional work on reinforcement and for securing plastic tubes for component activation.

- Equally suitable for horizontal applications (ceiling and floor panels) and vertical utilization (walls, pillars).

- Easy to operate with just one hand and in an anatomically correct, upright posture.

Apply vertically. Press without effort: The tie wire surrounds the reinforcement.

Pull evenly: The tie twists itself.

Keep pulling until reaching the automatic release point: The tie reaches its full strength.

Completed tie.

It doesn't get any easier: Apply - press - pull - release - done.

6_7

DFThe ideal combination of practical experience and innovation:DF 16 rebar tier.

DF 16

1 2 3 4 5

Versatile applications in horizontal and vertical applications: The DF 16 also secures plastic tubes for component activation on the reinforcement in no time and proves itself when laying ducts and during other installation work.

Awarded with the Euro-Test award from BG Bau* for its outstanding performances in occupa-tional safety and health protection.

* BG Bau (Professional Associa- tion of the Construction Industry)

UP TO 1,000KNOTSPER HOUR!

Always ready for use.And always a clean job in no time.

- Independent of battery level and charging times.- No wire waste that needs to be removed.

Practical holster:

For DF 16 ties – can easily be attached to your waistband.

RCP 12 RCP 16 RCP 20 RCP 25 RCP 32

REBAR CUTTING AND BENDING MACHINES

Device size (L x W x H) mm 510 x 110 x 135 520 x 130 x 120 385 x 180 x 240 405 x 170 x 250 560 x 180 x 335

Operating weight kg 6.7 9.1 13.7 13.9 27.0

Cutting diameter max. mm 12 16 20 25 32

Cutting speed max.* sec 5.0 4.0 5.0 5.5 6.0

Hydraulic cutting force t 7 10 30 40 50

Drive Electro-hydraulic Electro-hydraulic Electro-hydraulic Electro-hydraulic Electro-hydraulic

Power input kW / Voltage V 1.2 / 230 1˜ 1.1 / 230 1˜ 1,4 / 230 1˜ 1.4 / 230 1˜ 1.4 / 230 1˜Rated current at 230 V A 5.8 5.3 6.8 6.8 6.8

Cutting head Wedge cutting head Wedge cutting head Shear cutting head Shear cutting head Shear cutting head

Interchangeable head system No No Yes Yes No

Availability of blade Frequency 1 2 2 2 2

Reinforcing steel grade N/mm2 750 750 750 750 750

RCE 16 RCE 20 RCE 25

REBAR CUTTING AND BENDING MACHINES

Device size (L x W x H) mm 420 x 110 x 215 420 x 110 x 215 475 x 140 x 235

Operating weight kg 7.1 10.0 13.8

Cutting diameter max. mm 16 20 25

Cutting speed max.* sec 5.0 5.0 5.0

Hydraulic cutting force t 11 14 31

Drive Electro-hydraulic Electro-hydraulic Electro-hydraulic

Power input kW / Voltage V 1.2 / 230 1˜ 1.1 / 230 1˜ 1.1 / 230 1˜Rated current at 230 V A 5.8 5.3 5.3

Cutting head Shear cutting head Shear cutting head Shear cutting head

Interchangeable head system No No No

Availability of blade Frequency 2 2 2

Reinforcing steel grade N/mm2 750 750 750

DF 16

REBAR TIER

Device size (L x W x H) mm (with retracted handle)

656 x 164 x 118

Device size (L x W x H) mm (with extended handle)

883 x 164 x 118

Operating weight kg 2.2

Number of ties per tie wire strip (magazine) Piece

77

Material of tie wire Copper-coated wire

Tie ø Wire thickness mm 1.1

Tie speed knots/h Approx. 1,000

Time required per knot sec/knot Approx. 0.8

Field of application: External diameter of the round materials to be tied mm

Minimum 6 + 6 / Maximum 16 + 16

Tie order sizes Cardboard box: content 7,700 ties Pallet: content 138,600 ties

Technical data.

Subject to change without notice. Information without guarantee. Only the contractual agreement is decisive. 8_9

2 Norton Shores, USA

1 Milwaukee, USA

Production worldwide. Service near you.

8 Manila, Philippines

3 Korbach, Germany

7 Kragujevac, Serbia

4 Pfullendorf, Germany

6 Linz, Austria

5 Reichertshofen, Germany

Always in your area: www.wackerneuson.com

10_11_12

PRODUCTION LOCATIONS OF THE WACKER NEUSON GROUP

1 Milwaukee, USA2 Norton Shores, USA3 Korbach, Germany4 Pfullendorf, Germany5 Reichertshofen, Germany6 Linz, Austria7 Kragujevac, Serbia8 Manila, the Philippines

1

5

3

7

2

6

4

8

INTERNATIONAL CENTRE OF EXCELLENCE AND MODERN SHOWCASE FACTORY FOR CONSTRUCTION EQUIPMENT.

The factory in Reichertshofen (Germany) is one of the most traditional production and development sites in the group. This is where concepts for the future arise - and also where the leading machines and devices in the industry are manufactured.

CUSTOMER

PERFORMANCE

INNOVATION QUALITY

CHARACTER

The vision and values wheel of Wacker Neuson: Customer success is at our center.

We win customers over with the values of a medium-sized and market-listed family-owned company. With the strength and expertise of a global organization. With people who fulfill our creed every day with life and ideas.

We believe in quality, innovation, performance and character. And the sustainable success of our customers, whom everything is ultimately about. Always in your area: www.wackerneuson.com

WN.25.63.1/03/2013 EN

www.wackerneuson.com