RAV4_Navi_U

1

Introduction

Thank you for your purchase of the Navigation System. Please readthismanual carefully toensureproperuse. Keep thismanual inyourvehicle at all times.

The Navigation System is one of the most technologically advancedvehicle accessories ever developed. The system receives satellite sig-nals from the Global Positioning System (GPS) operated by the U.S.Department of Defense. Using these signals and other vehicle sen-sors, the system indicates your present position and assists in locatinga desired destination.

The navigation system is designed to select efficient routes from yourpresent starting location to your destination. The system is also designedtodirect you toadestination that is unfamiliar to you in anefficientmanner.The system uses DENSO maps. The calculated routes may not be theshortest nor the least traffic congested. Your own personal local knowl-edge or “short cut” may at times be faster than the calculated routes.

The navigation system’s database includes about 75 Point of Interestcategories to allow you to easily select destinations such as restaurantsand banks. If a destination is not in the database, you can enter the streetaddress or a major intersection close to it and the system will guide youthere.

The systemwill provide both a visual mapand audio instructions. The au-dio instructions will announce the distance remaining and the direction toturn in approaching an intersection. These voice instructions will help youkeep your eyes on the road and are timed to provide enough time to allowyou to maneuver, change lanes or slow down.

RAV4_Navi_U

2

Please be aware that all current vehicle navigation systems havecertain limitations that may affect their ability to perform properly.The accuracy of the vehicle’s position depends on the satellite con-dition, road configuration, vehicle condition or other circumstan-ces. For more information on the limitations of the system, refer topages 178 through 179.

RAV4_Navi_U

3

For safety reasons, this manual indicatesitems requiring particular attention with thefollowing marks.

CAUTIONThis is a warning against anythingwhich may cause injury to people ifthe warning is ignored. You are in-formed about what you must or mustnot do in order to reduce the risk ofinjury to yourself and others.

NOTICE

This is a warning against anythingwhich may cause damage to the ve-hicle or its equipment if the warningis ignored. You are informed aboutwhat you must or must not do in or-der toavoid or reduce the riskofdam-age to your vehicle and its equip-ment.

INFORMATIONThis provides additional information.

To use this system in the safest possiblemanner, followall the safety tips shownbe-low.

This system is intended to assist in reach-ing the destination and, if used properly,can do so. The driver is solely responsiblefor the safe operation of your vehicle andthe safety of your passengers.

Donot useany feature of this system to theextent it becomes a distraction and pre-vents safe driving. The first priority whiledriving should always be the safe opera-tion of the vehicle. While driving, be sureto observe all traffic regulations.

Prior to the actual use of this system, learnhow touse it andbecome thoroughly famil-iar with it. Read the entire Navigation Sys-temOwner’s Manual to make sure you un-derstand the system. Do not allow otherpeople to use this system until they haveread and understood the instructions inthis manual.

For your safety, some functions may be-come inoperable when driving. Unavail-able touch screen buttons are dimmed.Only when the vehicle is not moving, canthe destination and route selection bedone.

Important information aboutthis manual Safety Instruction

RAV4_Navi_U

4

CAUTIOND For safety, the driver should not

operate the navigation systemwhile he/she is driving.Insufficient attention to the roadand traffic may cause an accident.

D While driving, be sure to obey thetraffic regulations and maintainawareness of the road conditions.If a traffic sign on the road hasbeen changed, route guidancemay not indicate such changedinformation such as the directionof a one way street.

While driving, listen to the voice instruc-tions as much as possible and glance atthe screen briefly and only when it is safe.However, do not totally rely on voice guid-ance. Use it just for reference. If the sys-tem cannot determine the current vehicleposition correctly, there is a possibility ofincorrect, late, or non−voice guidance.

The data in the system may occasionallybe incomplete. Road conditions, includingdriving restrictions (no left turns, street clo-sures, etc.) frequently change. Therefore,before following any instruction from thesystem, look to seewhether the instructioncan be done safely and legally.

This system cannot warn about suchthings as the safety of an area, condition ofstreets, and availability of emergency ser-vices. If unsure about the safety of anarea, do not drive into it. Under no cir-cumstances is this system a substitutefor the driver’s personal judgement.

Use this system only in locations where itis legal to do so. Some states/provincesmay have laws prohibiting the use of videoand navigation screens next to the driver.

RAV4_Navi_U

5

Table of ContentsQuick guide —— Overview buttons and guidance screen 10. . . . . . . . . . .— Registering home 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .— Registering preset memory points(Quick access) 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

— Operation flow: guiding the route 16. . . . . . . . . . . . . . . . .— Setting home as the destination 17. . . . . . . . . . . . . . . . . .Navigation system function index 18. . . . . . . . . . . . . . . . . . .1 Basic Functions

�Basic information before operation�Display operation 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Initial screen 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Touch screen operation 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Inputting letters and numbers/List screen operation 26. . . . . . . . . . . .Function help 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Map screen operation 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current position display 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Screen scroll operation 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switching the screens 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Map scale 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foot print map 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Orientation of the map 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

QuickGuide

1

2

3

4

5

6

7

Index

RAV4_Navi_U

6

2 Destination SearchQuick reference (“Destination” screen) 42. . . . . . . . . . . . . . . . . . . . . . .Destination search 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Selecting the region to search 44. . . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by Home 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by Quick access 46. . . . . . . . . . . . . . . . . . . . . . .Destination search by “Address” 47. . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “POI�” 51. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Phone #” 58. . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Emergency” 59. . . . . . . . . . . . . . . . . . . . . . .Destination search by “Memory” 59. . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Previous” 60. . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Map” 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Intersection” 61. . . . . . . . . . . . . . . . . . . . . . .Destination search by “Freeway Ent./Exit” 62. . . . . . . . . . . . . . . . . .Destination search by “Coordinates” 63. . . . . . . . . . . . . . . . . . . . . . .Deleting set destinations 64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Starting route guidance 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Route GuidanceRoute guidance screen 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Typical voice guidance prompts 73. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Distance and time to destination 75. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Setting and deleting destination 76. . . . . . . . . . . . . . . . . . . . . . . . . . .

Adding destinations 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Reordering destinations 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting destinations 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting route 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Search condition 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Detour setting 79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route preference 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Starting route from adjacent road 81. . . . . . . . . . . . . . . . . . . . . . . . .

Map view 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Display POI� icons 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route overview 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route preview 85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route trace 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

�: Point of Interest

RAV4_Navi_U

7

4 Advanced Functions�Descriptions of functions for more effective use�Quick reference (“Menu” screen) 90. . . . . . . . . . . . . . . . . . . . . . . . . . . .Quick reference (“Setup” screen) 91. . . . . . . . . . . . . . . . . . . . . . . . . . . .Suspending and resuming guidance 92. . . . . . . . . . . . . . . . . . . . . . . . .Volume 93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User selection 94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .My places 96. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Registering memory points 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing memory points 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting memory points 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Registering home 104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting home 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Registering area to avoid 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing area to avoid 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting area to avoid 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting previous points 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .XMr NavTraffic 120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Other FunctionsMaintenance information 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maintenance information setting 128. . . . . . . . . . . . . . . . . . . . . . . . .Dealer setting 130. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Calendar with memo 132. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Adding a memo 134. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing a memo 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Memo list 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen adjustment 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Screen setting 138. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Beep setting 141. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Selecting a language 141. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

8

6 Audio SystemQuick reference 144. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Using your audio system 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Some basics 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Radio operation 149. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Radio operation (XMr Satellite Radio broadcast) 151. . . . . . . . . . .CD player operation 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Audio remote controls 169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Audio system operating hints 170. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 AppendixLimitations of the navigation system 178. . . . . . . . . . . . . . . . . . . . . . . . .Map database information and updates 180. . . . . . . . . . . . . . . . . . . . . .

Index 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

9

10

0U5122X

No. Name Function Page

1North−up orheading−upsymbol

This symbol indicates a map view withnorth−up or heading−up. Touching thissymbol changes the map orientation.

39

2 Scale indicator This figure indicates the map scale. 37

3 “MAP/VOICE”button

Push this button to repeat a voice guid-ance, cancel one touch scroll, startguidance, and display the current posi-tion.

30, 74

4 “DEST” button Push this button todisplay the “Destina-tion” screen.

12, 14, 16, 17,42, 43

5 “MENU” button Push this button to display the “Menu”screen.

90, 92, 93, 94,96, 110, 189

6 “DISP/TILT”button

Push this button to display the “Display”screen. 22, 137

RAV4_Navi_U

Quick guide —— Overview buttons and guidance screen

11

No. Name Function Page

7 “INFO” button Push this button to display the “Informa-tion” screen.

128, 132, 138,141

8 Zoom out button Touch this button to reduce the mapscale. 37

9 “Mark”Touch this button to register the currentposition or the cursor position as amemory point.

31

10 “Route” Touch this button to change the route. 76, 78

11 “Map View”

Touch this button to browse informationabout guidance route, to set the Pointsof Interest to be displayed on thescreen, or to record the route.

82, 84, 85, 86

12 “AAOFF”

Touch this button to obtain a broaderview. Someof thebuttons on thescreenare not displayed. They are displayedagain by touching “ON""”.

114

13 Zoom in button Touch this button to magnify the mapscale. 37

14 Foot print mapbutton

Touch this button todisplay the foot printmap and the building information. 37

15Screenconfigurationbutton

Touch this button to change the screenmode. 34

16 Distance and timeto destination

Displays the distance, the estimatedtravel time to the destination, and theestimatedarrival timeat thedestination.

75

17 XMr NavTrafficmark

This mark is displayed when XMr Nav-Traffic information is received. 120

18

“GPS” mark(GlobalPositioningSystem)

Whenever the vehicle is receiving sig-nals from the GPS, this mark is dis-played.

178

RAV4_Navi_U

12

0U5117X

1 Push “DEST” button.

2 Touch .

If home has not been registered, you can

register it by touching .

3 Thereare11differentmethods tosearch your home.

See “Destination search” on page 43.

4 Touch “Enter”.

The “Memory Point” screen is displayed.

RAV4_Navi_U

— Registering home

13

5 Touch “OK”.

Registration of home is complete.You can also register home by touchingthe “MENU” button. (See “—Registeringhome” on page 104.)You can change the icon, quick access,name, location and phone number. (See“ — Editing memory points” on page 98.)

RAV4_Navi_U

14

0U5117X

1 Push “DEST” button.

2 Touch one of the quick accessbuttons.

You can set a memory point to one of thequick access buttons which has not beenset.

3 Thereare12differentmethods tosearch preset memory points.

See “Destination search” on page 43.

4 Touch “Enter”.

The “Memory Point” screen is displayed.

RAV4_Navi_U

— Registering preset memory points(Quick access)

15

5 Touch “OK”.

Registration of preset memory points iscomplete.You can also register preset memorypoints by touching the “MENU” button.(See “ — Registering memory points” onpage 97.)You can change the icon, quick access,name, location and phone number. (See“ — Editing memory points” on page 98.)The registered points can be used on the“Destination” screen. (See“—Destinationsearch by Quick access” on page 46.)

RAV4_Navi_U

16

0U5117X

1 Push “DEST” button.

2 Thereare12differentmethods tosearch destinations.

See “Destination search” on page 43.

3 Touch “Enter”.

The navigation system performs a searchfor the route.

4 Touch“Guide”,andstartdriving.

Routes other than the one recommendedcan also be selected. (See “Starting routeguidance” on page 65.)

5 Guidance to the destination isgiven via voice and on the guid-ance screen.

RAV4_Navi_U

— Operation flow: guiding the route

17

0U5117X

1 Push “DEST” button.

2 Touch .

The can be used if your home hasbeen registered. (To register “Home”, see“ — Registering home” on page 104.)

3 Touch “Enter”.

The navigation system performs a searchfor the route.

4 Touch“Guide”,andstartdriving.

Routes other than the one recommendedcan also be selected. (See “Starting routeguidance” on page 65.)

5 Guidance to the destination isgiven via voice and on the guid-ance screen.

RAV4_Navi_U

— Setting home as the destination

RAV4_Navi_U

18

hMapiDisplaying maps Page

Viewing the map screen 10

Displaying the current vehicle position 30

Viewing the current position vicinity map 30

Changing the scale 37

Changing the map orientation 39

Displaying POIs� 82

Displaying the estimated travel/arrival time to the destination 75

Selecting the dual map screen 34

Viewing foot print map 37

Deleting map screen touch screen buttons 114

Searching destination Page

Searching the destination (by home, POI�, phone #, etc.) 43

Changing the selected region 44

Operating the map location of the selected destination 65

hRoute guidanceiBefore starting route guidance Page

Setting the destination 65

Viewing alternative routes 65

Starting route guidance 65

Before starting or during route guidance Page

Viewing the route 65

Adding destinations 76

Changing the route 78

Displaying the estimated travel/arrival time to the destination 75

�: Point(s) of Interest

Navigation system function index

RAV4_Navi_U

19

During route guidance Page

Suspending route guidance 92

Adjusting route guidance volume 93

Deleting the destination 64, 77

Displaying the entire route map 84

hUseful functionsiMemory points Page

Registering your own memory points 96

Marking icons on the map 96

Information Page

Displaying vehicle maintenance timing 128

Displaying the calendar 132

RAV4_Navi_U

20

SECTION 1

BASIC FUNCTIONS

21

BASIC FUNCTIONS

Basic information before operation

D Display operation 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Initial screen 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Touch screen operation 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Inputting letters and numbers/List screen operation 26. . . . . . . . . .

D Function help 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Map screen operation 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Current position display 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Screen scroll operation 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Switching the screens 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Map scale 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Foot print map 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Orientation of the map 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

BASIC FUNCTIONS

22

1. Push the “DISP/TILT” button.

2. Touch “TILT”.

INFORMATIONTo adjust the screen settings such asbrightness, see “Screen adjustment”on page 137.

Adjustment of the angle of the display canbe done by touching “TILT”. Each touch“TILT” will tilt the display to positions 1 ,2 , 3 and then back to 0 in the reverseorder.Vehicles with smart key system—

If the “ENGINE START STOP” switch isset at OFF, the display will automaticallymove back to position 0 . The display willautomatically resume the previous posi-tion when the engine switch is in ACCES-SORY or IGNITION ON mode.

Vehicles without smart key system—

If the engine switch is set at OFF, the dis-play will automatically move back to posi-tion 0 . The display will automatically re-sume the previous position when theengine switch is in “ACC” or “ON” position.

RAV4_Navi_U

Finish

Display operation

BASIC FUNCTIONS

23

CAUTIONInjurymay result fromplacing a handor any fingers on the display while itis moving.

NOTICE

Do not place any foreign objects onthedisplaywhile it ismoving. It coulddamage your navigation system.

INFORMATIONUnder extremely cold conditions, thedisplaymay react slowly or operationsound may become louder.

Vehicles with smart key system —When the “ENGINE START STOP” switchis in ACCESSORY or IGNITION ONmode, the initial screen will be displayedand the system will begin operating.

Vehicles without smart key system —When the engine switch is in “ACC” or“ON” position, the initial screen will bedisplayed and the system will begin oper-ating.

CAUTIONWhen the vehicle is stopped with theengine running, always apply theparking brake for safety.

After a few seconds, the “CAUTION”screen will be displayed.

RAV4_Navi_U

Finish

Initial screen

BASIC FUNCTIONS

24

After about 5 seconds, the “CAUTION”screen automatically switches to the mapscreen. When the “MAP/VOICE” buttonis also pushed, the map screen is dis-played.While the “CAUTION” screen is displayed,the “DEST” or “MENU” button cannot beoperated. And if the“Calendar” or“Main-tenance” buttons on the “Information”screenare touched, thescreenwill changeback to “CAUTION” screen and thenchange to the map screen in about 5 sec-onds later or if the “MAP/VOICE” button ispushed.

D Maintenance informationThis system informsaboutwhen to replacecertain parts or components and showsdealer information (if registered) on thescreen.When the vehicle reaches a previously setdriving distance or date specified for ascheduled maintenance check, the “Infor-mation” screen will be displayed when thenavigation system is in operation.

To disable this screen, touch “Do NotDisplay This Message Again.”. Thisscreen goes off if the screen is not op-erated for several seconds.Toprevent this information screen frombe-ing displayed again, touch “Do NotDisplay This Message Again.”.To register “Maintenance information”, see“Maintenance information” on page 128.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

25

D Memo informationThis system notifies about a memo entry.At the specified date, the memo informa-tion will be displayed when the navigationsystem is in operation. Thememo informa-tion screenwill be displayed every time thesystem is turned on.

The memo of the current date can beviewed by touching “Memo”. (See “ —Editing a memo” on page 135.)To disable this screen, touch “Do NotDisplay This Message Again.”. Thisscreen goes off if the screen is not op-erated for several seconds.Toprevent this information screen frombe-ing displayed again, touch “Do NotDisplay This Message Again.”.To register a memo information, see “Cal-endar with memo” on page 132.

This system is operated mainly by thetouch screen buttons on the screen.To prevent damage to the screen, light-ly touch buttons on the screen with thefinger. When a button on the screen istouched, a beep sounds.Donot use objects other than the fingerto touch the screen.

INFORMATIOND If the system does not respond to

a touch on a touch screen button,move the finger away from thescreen and then touch it again.

D Dimmed touch screen buttonscannot be operated.

D Wipe off fingerprints using a glasscleaning cloth. Do not use chemi-cal cleaners to clean the touchscreen.

D The displayed image may becomedarker and moving images may beslightly distorted when the displayis cold.

D Under extremely cold conditions,the map may not be displayed andthe data input by a user may be de-leted. Also, the touch screen but-tons may be harder than usual todepress.

D When you look at the screenthroughpolarizedmaterial such aspolarized sunglasses, the screenmay be dark and hard to see. If so,change the angle of the screen,look at the screen from differentangles, adjust the screen settingson the “Display” screen, or take offyour sunglasses.

RAV4_Navi_U

Finish

Touch screen operation

BASIC FUNCTIONS

26

When searching for an address or a name,or entering a memo, letters and numberscan be input via the touch screen.

INFORMATIONKeyboard layout can be changed.(See page 112.)

D To input lettersTodisplay thealphabet keys, touch “A−Z”

or “ ”.

Enter letters by touching the alphabet keysdirectly.

: Touching this button erases oneletter. By holding this button, let-ters will continue to be erased.

On certain letter entry screens, letters canbe entered in upper or lower case.

: To enter in lower case.

: To enter in upper case.

RAV4_Navi_U

Finish

Inputting letters andnumbers/List screenoperation

BASIC FUNCTIONS

27

D To input numbers and symbolsTo display the number keys and symbolkeys, touch “0−9”.

Enter numbers and symbols by touchingthe number keys and symbol keys directly.

: Touching this button erasesone letter. By holding thisbutton, letters will continue tobe erased.

: Touching this button displaysother symbols.

D To display the list

To search for an address or a name, touch“List”. Matching items from the databaseare listed even if the entered address orname is incomplete.If the number ofmatches is four or less, thelist is displayed without touching “List”.

INFORMATIONThe number of matching items isshown to the right side of the screen.If the number of matching items ismore than 9999, the system displays“����” on the screen.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

28

D List screen operationWhen a list is displayed, use the appropri-ate button to scroll through the list.

To shift to the next or previouspage.

To scroll up or down one item at atime.

This expresses a displayedscreen position.

If appears to the right of theitem name, the complete name istoo long for the display. Touchto scroll to the end of the name.

Touch to scroll to thebeginningof the name.

D SortingThe order of a list displayed on the screencan be rearranged.TYPE A

1. Touch “Sort by”.

2. Select the desired sorting criteria.Sorting criteria are as follows:“Distance”: To sort in the order of dis-tance from your current location.“Date”: To sort in the order of the date.“Category”: To sort in the order of thecategory.“Icon”: To sort in the order of the icons.“Name”: To sort in order by name.“Attribute”: To sort in order by attribute.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

29

TYPE B

“Dist. Sort”: To sort in the order of dis-tance from the current vehicle location.The distance from current vehicle positionup to the destination is displayed to theright of the name.“NameSort”:To sort in alphabetical orderby name.

Explanations for the functions of the “Des-tination”, “Setup”, “Menu” and “XM Nav-Traffic” screens can be viewed.

Touch .

: To view the previous page.

: To view the next page.

: To return to the previous screen.

RAV4_Navi_U

Finish

Function help

BASIC FUNCTIONS

30

When starting the navigation system, thecurrent position is displayed first.This screen displays the current vehicleposition andamapof the surrounding localarea.

The current vehicle positionmark ( 1 ) ap-pears in the center or bottom center of themap screen.A street name will appear on the bottom ofthe screen, depending on the scale of themap ( 2 ).You can return to this map screen thatshows your current position at any timefrom any screen by pushing the “MAP/VOICE” button.While driving, the current vehicle positionmark is fixed on the screen and the mapmoves.The current position is automatically set asthe vehicle receives signals from the GPS(Global Positioning System). If the currentposition is not correct, it is automaticallycorrected after the vehicle receives sig-nals from the GPS.

INFORMATIOND After battery disconnection, or on

a new vehicle, the current positionmay not be correct. As soon as thesystem receives signals from theGPS, the correct current positionis displayed.

D To correct the current positionmanually, see page 118.

When any point on the map is touched,that pointmoves to the center of thescreenand is shown by the cursor mark ( 1 ).

Use the scroll feature to move the desiredpoint to the center of the screen for lookingat a point on the map that is different fromthe current position of the vehicle.If the finger is continuously held on thescreen, the map will continue scrolling inthat direction until the finger is removed.A street name, city name, etc. of thetouched point will be shown, depending onthe scale of the map ( 2 ). Distance fromthe current position to will also beshown ( 3 ).After the screen is scrolled, the map re-mains centered at the selected locationuntil another function isactivated. Thecur-rent vehicle position mark will continue tomove along your actual route and maymove off the screen. When the “MAP/VOICE” button is pushed, the current ve-hicle position mark returns to the center ofthe screen and the map moves as the ve-hicle proceeds along thedesignated route.

INFORMATIONWhen the one−touch scroll feature isused, the current vehicle positionmarkmay disappear from the screen.Move themapwithaone−touchscrollagain or push the “MAP/VOICE” but-ton to return to the current vehicleposition map location display.

RAV4_Navi_U

Finish

Map screen operation —— Current position display

— Screen scroll operation(one−touch scroll)

BASIC FUNCTIONS

31

D To set the cursor position as a des-tination

A specific point on the map can be set asa destination using the one−touch scrollfunction.

Touch “Enter ”.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)If there is already a set destination, “Addto ” and “Replace ” are displayed.

“Add to ”: To add a destination.

“Replace ”: To delete the existing des-tinations and set a new one.

D To register the cursor position as amemory point

Memory point registration enables easyaccess to a specific point.

Touch “Mark”.When you touch “Mark”, the followingscreen appears for a few seconds, andthen the map screen returns.

The registered point is shown by on themap.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

32

To change the icon or name, etc., see “ —Editing memory points” on page 98.Up to 106 memory points can be regis-tered. If there is an attempt to registermore than 106, a message appears forconfirmation.

D To see information about the iconwhere the cursor is set

To display information about an icon, setthe cursor on it.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

33

POI INFORMATIONWhen the cursor is set on a POI icon, thename and “Info.” are displayed on the topof the screen.

Touch “Info.”.

Information such as the name, address,and phone number are displayed.

If “Enter ” is touched, the position of thecursor is set as a destination.If there is already a set destination, “Addto ” and “Replace ” are displayed.

“Add to ”: To add a destination.

“Replace ”: To delete the existing des-tinations and set a new one.To register this POI as a memory point,touch “Mark”. (See page 97.)

INFORMATIONThe desired Point of Interest can bedisplayed on the map screen. (See“ — Display POI icons” on page 82.)

MEMORY POINT INFORMATIONWhen the cursor is set on a memory pointicon, the name and “Info.” are displayedon the top of the screen.

Touch “Info.”.

Information such as the name, address,and phone number are displayed.

If “Enter ” is touched, the position of thecursor is set as a destination.If there is already a set destination, “Addto ” and “Replace ” are displayed.

“Add to ”: To add a destination.

“Replace ”: To delete the existing des-tinations and set a new one.Toedit amemorypoint, touch “Edit”. (See“ — Editing memory points” on page 98.)To delete amemory point, touch “Delete”.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

34

DESTINATION INFORMATIONWhen the cursor is set on a destinationicon, the name and “Info.” are displayedon the top of the screen.

Touch “Info.”.

Information such as the name, address,and phone number are displayed.To delete a destination, touch “Delete”.

Any one of the screen configurations canbe selected .

1. Touch this button to display the fol-lowing screen.

2. To select the desired screen config-uration, touch one of the following but-tons.

RAV4_Navi_U

Finish

— Switching the screens

BASIC FUNCTIONS

35

Depending on the conditions, certainscreen configuration buttons cannot beselected.

: To display the single map screen.(See page 35.)

: To display the dual map screen.(See page 36.)

: To display the compass modescreen. (See page 36.)

: To display the turn list screen.(See page 72.)

: To display the arrow screen. (Seepage 72.)

: Todisplay the freeway informationscreen. (See page 70.)

: To display the intersection guid-ance screen or the guidancescreen on the freeway. (See page71.)

D Screen configurationsSINGLE MAPThis is a regular map screen.

While onadifferent screen, touchingwill display the single map screen.

The screen shows the single map.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

36

DUAL MAPA map can be displayed split in two.

While on adifferent screen, touchingwill display the dual map screen.

The screen shows the dual map. Themapon the left is the main map.The right sidemap can be edited by touch-ing any specific point on the right sidemap.

This screen can perform the following pro-cedures:1. Changing the map scale2. Displaying the POI icon3. Show XMr NavTraffic Info. (See page

120.)4. Changing the orientation of the mapTouch “OK” when you complete edi-ting.Thescreen returns to thedualmapscreen.

COMPASS MODECurrent vehicle position is indicated with acompass, not with a map.

While on adifferent screen, touchingwill display the compass mode screen.

Information about the destination and cur-rent position, as well as a compass, is dis-played on the screen.The destination mark is displayed in the di-rection of thedestination. Whendriving re-fer to the longitude and latitude coordi-nates, and the compass, tomake sure thatyour vehicle is headed in the direction ofthe destination.

INFORMATIONWhen the vehicle travels out of thecoverage area, the guidance screenchanges to the compass modescreen.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

37

Touch or to change the scaleof themap display. The scale bar and indi-cator at the bottom of the screen indicatesthe map scale menu. The scale range is150 feet (50 m) to 250 miles (400 km).

Touch or until the scale barchanges normally. By continuing to touchthe button, the scale bar changes smooth-ly.The scale of the map display can bechanged by touching the scale bar directly.It is not available while driving.The map scale is displayed under thenorth−up symbol or heading−up symbol atthe top left of the screen.

INFORMATIONWhen the map scale is at the maxi-mum range of 250 miles (400 km),

is not shown. When the mapscale is at the minimum range of 150feet (50 m), is not shown. Inareas where the foot print map isavailable themapscale changes from

to when at the minimumrange.

For the area which is covered by the footprint map (Some areas in the followingcities: Detroit, Chicago, N.Y., L.A), you canswitch to the foot print mapon a scale of 75feet (25 m).D To switch to the foot print map

changes into when the map isscaled down to 150 feet (50 m).

To display the foot print map, touch.

To delete the foot print map display, touch.

INFORMATIOND If themap or the current position is

moved to the areawhich is not cov-ered by the foot print map, thescreen scale automaticallychanges to 150 feet (50 m).

D On the foot print map, a one waystreet is displayed by .

D It is not possible to perform scroll-ing on the foot print map (one−touch scroll) while driving.

Building footprints in the database werecreated and provided byMAPMASTER.

RAV4_Navi_U

Finish

— Map scale — Foot print map

BASIC FUNCTIONS

38

D To display building informationInformation is available only for buildingsfor which information is recorded on themap disc.

1. Touch “Info.” while the foot printmap is displayed.If the map is displayed by a split screen,the map will change into a single map dis-play.

2. Using the eight−direction arrow,move the cursor to the position of thebuilding to display building informa-tion.3. Touch “Building Info.”.

Details of POIs in some buildings may bedisplayed.For detailed POI information, touch thebuilding name. You can see details of theselected POIs.

RAV4_Navi_U

Finish

BASIC FUNCTIONS

39

Theorientation of themapcanbechangedfromNorth−up to Heading−up by touchingthe orientation symbol at the top left of thescreen.

Touch or .

" North−up screen

" Heading−up screen

North−up symbol

Regardless of the direction of vehicle trav-el, North is always up.

Heading−up symbol

Thedirection of vehicle travel is always up.A red arrow indicates North.

RAV4_Navi_U

Finish

— Orientation of the map

BASIC FUNCTIONS

40

RAV4_Navi_U

Finish

SECTION 2

DESTINATION SEARCH

41

DESTINATION SEARCHD Quick reference (“Destination” screen) 42. . . . . . . . . . . . . . . . . . . . .

D Destination search 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Selecting the region to search 44. . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by Home 46. . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by Quick access 46. . . . . . . . . . . . . . . . . . . . .Destination search by “Address” 47. . . . . . . . . . . . . . . . . . . . . . . .Destination search by “POI�” 51. . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Phone #” 58. . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Emergency” 59. . . . . . . . . . . . . . . . . . . . .Destination search by “Memory” 59. . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Previous” 60. . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Map” 61. . . . . . . . . . . . . . . . . . . . . . . . . . .Destination search by “Intersection” 61. . . . . . . . . . . . . . . . . . . . .Destination search by “Freeway Ent./Exit” 62. . . . . . . . . . . . . . . .Destination search by “Coordinates” 63. . . . . . . . . . . . . . . . . . . . .Deleting set destinations 64. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Starting route guidance 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

�: Point of Interest

RAV4_Navi_U

Finish

DESTINATION SEARCH

42

The “Destination” screen allows you to search for a destination. To display the “Destina-tion” screen, push the “DEST” button.

1 “Address”A house number and the street addresscan be input by using the input keys.

47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 “POI”Select one of the many POIs (Points of In-terest) that have already been stored in thesystem’s database. 51. . . . . . . . . . . . . . .3 “Phone #”A destination can be entered by the tele-phone number. 58. . . . . . . . . . . . . . . . . . .4 “Previous”A destination can be selected from any ofthe last 100 previously set destinationsand from the previous starting point.

60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 “Memory”The location can be selected from the reg-istered “Memory points”. (To registermemory points, see “ — Registeringmemory points” on page 97.) 59. . . . . . .6 “Emergency”One of the four categories of emergencyservice points that arealready stored in thesystem’s database can be selected.

59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 “Map”A destination can be selected simply bytouching the location on the displayedmap. 61. . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

Quick reference (“Destination” screen)

DESTINATION SEARCH

43

8 “Intersection”The names of two intersecting streets canbe entered. This is helpful if only the gen-eral vicinity, not the specific address, isknown. 61. . . . . . . . . . . . . . . . . . . . . . . . . .9 “Freeway Ent./Exit”The name of a freeway (interstate) en-trance or exit can be entered. 62. . . . . .10 “?”Function help for the “Destination” screencan be viewed on this screen. 29. . . . . .11 “Del. Dest.”Set destinations can be deleted. 64. . . .12 “Change”To change the selected region to search,touch this button. 44. . . . . . . . . . . . . . . . .13 Quick access touch screen but-

tonsOne of 5 preset memory points can be se-lected by touching the screen directly. If aquick access point has not been regis-tered, amessage will be displayed andwillautomatically switch to the setting screen.To use this function, it is necessary to setthe “Quick Access” for eachmemorypoint.(To register a “Quick Access”, see “ —Editing memory points” on page 98.)

46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Home touch screen buttonA personal home address can be selectedwithout entering the address each time. Ifhome has not been registered, amessagewill be displayed and will automaticallyswitch to the setting screen. To use thisfunction, it is necessary to set “Home” forthe memory point. (To register “Home”,see “ — Registering home” on page 104.)

46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 “Coordinates”A destination can be set by using latitudeand longitude as coordinates. 63. . . . . .

Push the “DEST” button.

You can use one of 12 different methods tosearch your destination. (See pages 46through 63.)

INFORMATIONWhen searching the destination, theresponse to the touch screen buttonmay be slow.

RAV4_Navi_U

Finish

Destination search —

DESTINATION SEARCH

44

SELECTING THE REGION TO SEARCHON THE DESTINATION SCREEN1. Push the “DEST” button.

2. Touch “Change” on the “Destina-tion” screen to display a map of theUnited States and Canada divided into12 regions. (For map database informa-tion and updates, see “Map database in-formation and updates” on page 180.)

3. Touch one of “US1” through “CAN”to select a region to search.4. Touch “OK” and the “Destination”screen returns.

SELECTING THE REGION TO SEARCHON THE INPUT SCREENChange the selected region in order to seta destination from a different region by us-ing “Address”, “POI”, “Freeway Ent./Exit”or “Intersection”.

1. Touch the region to search buttonlike “US9” on the input screen to dis-play a map of the United States andCanada divided into 12 regions. (Formap database information and updates,see “Map database information and up-dates” on page 180.)

2. Touch one of “US1” through “CAN”to select a region to search.3. Touch “OK” and the previousscreen returns.

RAV4_Navi_U

Finish

— Selecting the region tosearch

DESTINATION SEARCH

45

U.S.A.

Button States included in the searchregion

“US1”IdahoOregonWashington

“US2” CaliforniaNevada

“US3”

ArizonaColoradoMontanaNew MexicoUtahWyoming

“US4”

IowaKansasMinnesotaMissouriNorth DakotaNebraskaSouth Dakota

“US5” OklahomaTexas

“US6”

IllinoisIndianaKentuckyMichiganOhioWisconsin

“US7”

ArkansasAlabamaLouisianaMississippiTennessee

“US8”

ConnecticutMassachusettsMaineNew HampshireNew JerseyNew YorkRhode IslandVermont

“US9”

Washington, D.C.DelawareMarylandPennsylvaniaVirginiaWest Virginia

“US10”

FloridaGeorgiaNorth CarolinaSouth Carolina

“HI” Hawaii

Canada

Button Provinces and regions in-cluded in the search region

“CAN” All provinces and regions inCanada included in thisbutton.

RAV4_Navi_U

Finish

DESTINATION SEARCH

46

1. Push the “DEST” button.

2. Touch the home touch screen but-ton on the “Destination” screen.The screen changes and displays themaplocation for home and the route prefer-ence. (See “Starting route guidance” onpage 65.)If home has not been registered, a mes-sage will be displayed and will automati-cally switch to the setting screen.To use this function, it is necessary to set“Home” for the memory point. (To register“Home”, see page 104.)

INFORMATIONGuidance starts from the current ve-hicle position to your home if “Enter”is touched even while driving.

1. Push the “DEST” button.

2. Touchanyof thequick access touchscreen buttons on the “Destination”screen.The screen changes and displays themaplocation of the quick access point and theroute preference. (See “Starting routeguidance” on page 65.)If a quick access point has not been regis-tered, amessage will be displayed andwillautomatically switch to the setting screen.To use this function, it is necessary to set“Quick Access” for each memory point.(To register “Quick Access”, see page100.)

INFORMATIONGuidance starts from the current ve-hicle position to the quick accesspoint if “Enter” is touched even whiledriving.

RAV4_Navi_U

Finish

— Destination search byHome

— Destination search byQuick access

DESTINATION SEARCH

47

There are 2 ways to input a destination byaddress.1. Push the “DEST” button.2. Touch “Address” on the “Destina-tion” screen.

(a) Inputting a house number and astreet name

1. Touch numbers directly on thescreen to input a house number.After inputting a house number, touch“OK” to display the screen for inputting astreet name.It is possible to input a street name first.Touch “Street” to display the screen for in-putting a street name.

2. Input the street name and touch“List”.

RAV4_Navi_U

Finish

— Destination search by“Address”

DESTINATION SEARCH

48

3. When the desired street name isfound, touch the corresponding but-ton.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)If the same address exists in more thanone city, the current screen changes to thecity list screen.

4. Select or enter the desired city.“Input Name”: To narrow down the listeditems by inputting the city name.

If inputting a street name first, the screenchanges. The house number can then beinput.

If the above screen appears, an addressrange on the screen can be selected.

If the same address exists in more thanone city, the current screen changes to thecity list screen.

RAV4_Navi_U

Finish

DESTINATION SEARCH

49

(b) Selecting a city to search

Touch “City”.

To search by city, the following threemeth-ods are possible.1. Input the city name2. Select from the nearest 5 cities3. Select from the last 5 cities

INFORMATIOND To change the selected region,

touch “Select Region”.

D To cancel the city setting, touch“Any City”.

INPUTTING THE CITY NAME1. Touch “Input City Name”.

2. Input a city name.

3. Touch the button of the desired cityname from the displayed list.“Map”:Todisplay theselected destinationand the route preference. (See “Startingroute guidance” on page 65.)The current screen changes to the screenfor inputting a house number or a streetname. (See “(a) Inputting a house numberand a street name” on page 47.)

RAV4_Navi_U

Finish

DESTINATION SEARCH

50

SELECTING FROM THE NEAREST 5CITIES1. Touch “Nearest 5 Cities”.

2. Touch the button of the desired cityname from the displayed list.The current screen changes to the screenfor inputting a house number or a streetname. (See “(a) Inputting a house numberand a street name” on page 47.)

SELECTING FROM THE LAST 5 CITIES

Touch the button of the desired cityname.If the navigation has never been used, nocities will be displayed on the screen.The current screen changes to the screenfor inputting a house number or a streetname. (See “(a) Inputting a house numberand a street name” on page 47.)

RAV4_Navi_U

Finish

DESTINATION SEARCH

51

There are two ways to search by POI(Points of Interest).(a) Search by name(b) Search by category1. Push the “DEST” button.2. Touch “POI” on the “Destination”screen.

3. Touch the button for the desiredmethod.

(a) Search by “Name”

1. Input the name of the Point of Inter-est.

2. Touch the button of the desired des-tination.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)When inputting the name of a specificPoint of Interest, and there are two ormoresites with the same name, the list screenis displayed.

RAV4_Navi_U

Finish

— Destination search by“POI”

DESTINATION SEARCH

52

Touch the button of the desired des-tination.If the same name exists in more than onecity, a search can be performedmore easi-ly with “City” and “Category”. (See “Se-lecting a city to search” on page 52 and“Selecting from the categories” on page54.)

INFORMATIONThe desired Point of Interest can bedisplayed on the map screen. (See“ — Display POI icons” on page 82.)

D Selecting a city to search

Touch “City”.

To search by city, the following threemeth-ods are possible.1. Input the city name2. Select from the nearest 5 cities3. Select from the last 5 cities

INFORMATIOND To change the selected region,

touch “Select Region”.

D To cancel the city setting, touch“Any City”.

RAV4_Navi_U

Finish

DESTINATION SEARCH

53

INPUTTING THE CITY NAME1. Touch “Input City Name”.

2. Input the city name.

3. Touch the button of the desired cityname from the displayed list.

SELECTING FROM THE NEAREST 5CITIES1. Touch “Nearest 5 Cities”.

2. Touch the button of the desired cityname.

RAV4_Navi_U

Finish

DESTINATION SEARCH

54

SELECTING FROM THE LAST 5 CITIES

Touch the button of the desired cityname.If the navigation has never been used, nocities will be displayed on the screen.

D Selecting from the categories

Touch “Category”.

If the desired POI category is on thescreen, touch the name to display a de-tailed list of the POI category.If the desired POI category is not on thescreen, touch “List All Categories” to listall POI categories.

When the desired category is touched, thePOI name list screen is displayed.

RAV4_Navi_U

Finish

DESTINATION SEARCH

55

(b) Search by “Category”The destination can be set by selecting thesearch point and the POI category.

Set the search point by the followingmethod:1. Input the city center2. Set the current position as the search

point3. Set the search point via the map

screen4. Set the search point from any destina-

tionIt is possible to display the names of POIslocated within approximately 20 miles (32km) from the selected search point.

INPUTTING THE CITY CENTER1. Touch “Input City Center”.

2. Input the city center name.

3. Touch the button of the desired citycenter name.

When an arrow facing the desired point istouched, the map scrolls in that direction.Releasing the finger from the arrow willstop the scrolling.4. Touch “Enter”.The search point is set and the “POI Cate-gory” screen will be displayed.

RAV4_Navi_U

Finish

DESTINATION SEARCH

56

SETTING THE CURRENT POSITION ASTHE SEARCH POINTTouch “Current Position”.The search point is set at the current posi-tion, and the “POI Category” screen will bedisplayed.

SETTING THESEARCHPOINT VIA THEMAP SCREEN1. Touch “Map”.

When an arrow facing the desired point istouched, the map scrolls in that direction.Releasing the finger from the arrow willstop the scrolling.2. Touch “Enter”.The search point is set and the “POI Cate-gory” screen will be displayed.

RAV4_Navi_U

Finish

DESTINATION SEARCH

57

SETTING THE SEARCH POINT FROMDESTINATIONS1. Touch the destination buttons at thebottom of the screen.

When an arrow facing the desired point istouched, the map scrolls in that direction.Releasing the finger from the arrow willstop the scrolling.2. Touch “Enter”.The search point is set and the “POI Cate-gory” screen will be displayed.

D To search POIs near the searchpoint

When the search point is set, the “POICategory” screen will be displayed.

Select the desired POI categories.“List”: If the desired POI categories havealready been selected, a list of POI will bedisplayed from among the selected cate-gories.The selected category icon appears on thetop left of the screen.If the desired POI category is not on thescreen, touch “List All Categories” to listall POI categories.

Select the desired POI categories fromthe list and touch “OK”.Theselected category icon appears on thetop left of the screen.

RAV4_Navi_U

Finish

DESTINATION SEARCH

58

“Select Category”: To return to the POIcategory selection screen.“Show List”: To display the list of POIs inthe selected categories.

By touching the button of the desired item,the screen changes and displays the maplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)The direction arrows ofPOIs aredisplayedonly when the current position is set as thesearch point.“On Route”:When the indicator is illumi-nated by touching this button, the list of theitems searched along the route is dis-played.

1. Push the “DEST” button.2. Touch “Phone #” on the “Destina-tion” screen.

3. Input a telephone number.4. After inputting a telephone number,touch “OK”.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)If there is more than one site having thesame number, the following screen will bedisplayed.

INFORMATIOND If there is no match for the tele-

phone number inputted, a list ofidentical numbers with differentarea codes will be displayed.

D Toset amemory point as adestina-tion using the phone number, thenumber must be registered pre-viously. (See page 103.)

RAV4_Navi_U

Finish

— Destination search by“Phone #”

DESTINATION SEARCH

59

1. Push the “DEST” button.2. Touch “Emergency” on the “Des-tination” screen.The display changes to a screen to selectpolice stations, dealers, hospitals or firestations. While driving, only nearby policestations, dealers, hospitals, or fire stationsare shown. The current position is shownwith an address, and the latitude and thelongitude at the top of the screen.

3. Touch the desired emergency cate-gory.The selected emergency category list isdisplayed.

4. Touch the button of the desired des-tination.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)

INFORMATIONThe navigation system does notguide in areas where route guidanceis unavailable. (See page 179.)

1. Push the “DEST” button.2. Touch “Memory” on the “Destina-tion” screen.A list of registered memory points is dis-played. (To register or edit memory points,see “My places” on page 96.)

3. Touch the button of your desiredmemory point.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)

RAV4_Navi_U

Finish

— Destination search by“Emergency”

— Destination search by“Memory”

DESTINATION SEARCH

60

1. Push the “DEST” button.2. Touch “Previous” on the “Destina-tion” screen.

The previous starting point and up to 100previously set destinations are displayedon the screen.3. Touch the button of the desired des-tination.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)

D Deleting previous points1. Touch “Delete” for the previouspoint button you want to delete.“Delete All”: To delete all previous pointsin the system.

2. To delete the point, touch “Yes”. Tocancel the deletion, touch “No”.

INFORMATIONThe list of previous destinations canalso be deleted by touching “DeletePrevious Points” on the “My Places”screen when the vehicle is stopped.(See“—Deletingpreviouspoints”onpage 110.)

RAV4_Navi_U

Finish

— Destination search by“Previous”

DESTINATION SEARCH

61

1. Push the “DEST” button.2. Touch “Map” on the second page ofthe “Destination” screen.

The screen changes and displays themaplocation that was previously displayed justbefore the destination input operation andthe route preference. (See “Starting routeguidance” on page 65.)

INFORMATIONGuidance starts if “Enter” is touchedeven while driving. However, the cur-sor cannot be moved.

1. Push the “DEST” button.2. Touch “Intersection” on the secondpage of the “Destination” screen.

3. Input the name of the two intersect-ing streets which are located near thedestination to be set.

4. Touch the button of the desireditem.After inputting the two intersecting streets,the screen changes and displays the maplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)

RAV4_Navi_U

Finish

— Destination search by“Map”

— Destination search by“Intersection”

DESTINATION SEARCH

62

If the same two streets cross at more thanone intersection, the screen changes anddisplays the menu to select the city namewhere the streets intersect. Select the city,and the map location of the selected des-tination and the route preference. (See“Starting route guidance” on page 65.)

1. Push the “DEST” button.2. To input a freeway entrance or exit,touch “Freeway Ent./Exit” on the sec-ond page of the “Destination” screen.

Be sure to use the complete name of thefreeway or highway, including the hyphen,when entering the destination. Freewaysand interstates usean “I” (I−405). UShigh-ways use the state designation before thenumber (CA−118).

3. Select thedesired freewayby touch-ing the button.

4. Either a freeway “Entrance” or“Exit” can be selected.

RAV4_Navi_U

Finish

— Destination search by“Freeway Ent./Exit”

DESTINATION SEARCH

63

5. Touch the button of the desired en-trance or exit name.The screen changes and displays themaplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)“Input Name”: An applicable list is dis-played by touching this button and input-ting the name.

1. Push the “DEST” button.2. Touch “Coordinates” on the secondpage of the “Destination” screen.

3. Input the latitude and the longitude.4. When the input is finished, touch“OK”.By touching thebutton of the desired point,the screen changes and displays the maplocation of the selected destination and theroute preference. (See “Starting routeguidance” on page 65.)

RAV4_Navi_U

Finish

— Destination search by“Coordinates”

DESTINATION SEARCH

64

A set destination can be deleted.1. Push the “DEST” button.2. Touch “Del. Dest.” on the “Destina-tion” screen.When more than one destination is set, alist will be displayed on the screen.

3. Touch the destination for deletion.“Delete All”: To delete all destinations onthe list.

Amessage appears to confirm the requestto delete.4. To delete the destination(s), touch“Yes”.If “Yes” is touched, the data cannot be re-covered.If “No” is touched, the previous screenwillreturn.

5. If more than one destination is set,touch “OK” after deleting the destina-tions.The system searches for the guidanceroute again, and displays the entire route.

INFORMATIONSet destinations can also be deletedby touching “Route”. (See “—Delet-ing destinations” on page 77.)

RAV4_Navi_U

Finish

— Deleting set destinations

DESTINATION SEARCH

65

After inputting the destination, the screenchanges and displays the map location oftheselected destination and the routepref-erence.

1. When an arrow facing the desiredpoint is touched, themap scrolls in thatdirection.Releasing the finger from the arrow willstop the scrolling.2. Touch “Enter”.The system starts route search and dis-plays recommended routes.If there is already a set destination, “Addto ” and “Replace ” are displayed.

“Add to ”: To add a destination.

“Replace ”: To delete the existing des-tinations and set a new one.“RoutePreference”: To change the routepreference. (See page 66.)“Info.”: If this button is displayed on thetop of the screen, touch it to view itemssuch as name, address, and phone num-ber.

1 Current position2 Destination point3 Type of the route and the distance4 Distance of the entire route3. To start guidance, touch “Guide”.“3 Routes”: To select the desired routefrom three possible routes. (See page67.)“Route”: To change the route. (Seepages 76 and 78.)

RAV4_Navi_U

Finish

Starting route guidance

DESTINATION SEARCH

66

INFORMATIOND Guidance can be suspended or re-

sumed. (See “Suspending and re-suming guidance” on page 92.)

D If “Guide” is touched until a beepsounds, demo mode will start.Push the “MAP/VOICE” button tofinish Demo mode.

D The route for returning may not bethe same as that for going.

D The route guidance to the destina-tion may not be the shortest routenor a route without traffic conges-tion.

D Route guidance may not be avail-able if there is no road data for thespecified location.

D When setting the destination on amap with a scale larger than 0.5miles (800 m), the map scalechanges to 0.5 miles (800 m) auto-matically. Set the destinationagain.

D If a destination is entered, the roadnearest to the point you selected isset as the destination.

CAUTIONBe sure to obey traffic regulationsand keep road conditions in mindwhile driving. If a traffic sign on theroad has been changed, the routeguidance may not indicate suchchanged information.

D To change the route before startingguidance

ROUTE PREFERENCE

1. You can change route preference bytouching “Route Preference”.

2. Select the desired route preferenceby touching the button.Whensearching fora route, the systemwillavoid routes when the indicator is off.3. After choosing the desired routepreference, touch “OK”.

RAV4_Navi_U

Finish

DESTINATION SEARCH

67

INFORMATIOND Even if the “Allow Freeway” indi-

cator is dimmed, the route cannotavoid including a freeway in somecases.

D If the calculated route includes atrip by ferry, the route guidanceshows a sea route. After you travelby ferry, the current vehicle posi-tionmaybe incorrect. Upon recep-tion of GPS signals, it is automati-cally corrected.

3 ROUTES SELECTION

1. To select the desired route fromthree routes, touch “3 Routes”.

2. Touch “Quick1”, “Quick2” or“Short” to select the desired route.“Quick1”: Recommended route.This route is indicated by an orange line.“Quick2”: Alternative route.This route is indicated by a purple line.“Short”: A route by which you can reachthe destination in the shortest distance.This route is indicated by a green line.“Info.”: To display the following informa-tion about each of the 3 routes.

RAV4_Navi_U

Finish

DESTINATION SEARCH

68

1 Time necessary for the entire trip2 Distance of the entire trip3 Toll road4 Freeway5 Ferry

RAV4_Navi_U

Finish

SECTION 3

ROUTE GUIDANCE

69

ROUTE GUIDANCED Route guidance screen 70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Typical voice guidance prompts 73. . . . . . . . . . . . . . . . . . . . . . . . . . .

D Distance and time to destination 75. . . . . . . . . . . . . . . . . . . . . . . . . .

D Setting and deleting destination 76. . . . . . . . . . . . . . . . . . . . . . . .Adding destinations 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Reordering destinations 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting destinations 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Setting route 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Search condition 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Detour setting 79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route preference 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Starting route from adjacent road 81. . . . . . . . . . . . . . . . . . . . . . .

D Map view 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Display POI� icons 82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route overview 84. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route preview 85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Route trace 86. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

�: Point of Interest

RAV4_Navi_U

Finish

ROUTE GUIDANCE

70

During route guidance, various types ofguidance screens can be displayed de-pending on conditions.D Screen layout

1 Distance to the next turn and thearrow indicating turning direction

2 Current street name3 Distance and travel/arrival time to

the destination4 Current position5 Guidance route

INFORMATIOND If the vehicle goes off the guidance

route, the route is searched again.

D For someareas, the roadshavenotbeen completely digitized in ourdatabase. For this reason, theroute guidance may select roadthat should not be traveled on.

D When you arrive at your destina-tion, the destination name will bedisplayed on the top of the screen.Touching “OFF”clears thedisplay.

D During freeway drivingDuring freeway driving, the freeway exit in-formation screen will be displayed.This screen displays the distance to thenext junction and exit, or POIs in the vicin-ity of the freeway exit.

1 Current position2 Points of Interest that are close to

a freeway exit3 Exit number and junction name4 Distance from the current position

to the exit or junction5 Current street name

: To display the selected map of theexit vicinity.

: To scroll for farther junctions or exits.

: To scroll for closer junctions or exits.

: To scroll for the closest three junc-tions or exits.

RAV4_Navi_U

Finish

Route guidance screen

ROUTE GUIDANCE

71

D When approaching a freeway exit orjunction

When the vehicle approaches an exit orjunction, the guidance screen for the free-way will be displayed.

1 Road/area name2 Distance from the current position

to the exit or junction3 Current position“OFF”: The guidance screen on freewaydisappears and the map screen appears.

When touching or pushing the“MAP/VOICE” button, the guidancescreen on freeway reappears.

D When approaching an intersectionWhen the vehicle approaches an intersec-tion, the intersection guidance screen willbe displayed.

1 Next street name2 Distance to the intersection3 Current position“OFF”: The intersection guidance screendisappears and the map screen appears.

When touching or pushing the“MAP/VOICE” button, the intersectionguidance screen reappears.

RAV4_Navi_U

Finish

ROUTE GUIDANCE

72

D Other screensTURN LIST SCREENOn this screen, the list of turns on the guid-ance route can be viewed.

Touching during guidance displaysthe turn list.

1 Next street name or destinationname

2 Turn direction3 Distance between turns4 Current street name

ARROW SCREENOn this screen, information about nextturnson theguidance route canbeviewed.

Touching during guidance displaysthe arrow screen.

1 Exit number, street name contain-ing number or next street name

2 Turn direction3 Distance to the next turn4 Current street name

RAV4_Navi_U

Finish

ROUTE GUIDANCE

73

The voice guidance provides variousmes-sages as you approach an intersection, orother point where you need to maneuverthe vehicle.

4.7miles

0.25miles +�

1 “Proceed about 5 miles.”

2 “In a quarter of a mile, rightturn.”

3 “Right turn.”

4 (Beep sound only)

INFORMATIONOn freeways, interstates or otherhighways with higher speed limits,the voice guidance will be made atearlier points than on city streets inorder to allow time to maneuver.

4.2 miles

0.25 miles

1 “Proceed about 4 miles to thetraffic circle.”

2 “In a quarter of a mile, trafficcircle ahead, and then 3rd exitahead.”

3 “The 3rd exit ahead.”

4 “The exit ahead.”

5 (Beep sound only)

RAV4_Navi_U

Finish

Typical voice guidanceprompts

ROUTE GUIDANCE

74

One−way road

One−way road

�: The system indicates a U−turn if the dis-tance between two one−way roads (of op-posite directions) is less than 50 feet (15m) in residential areas or 164 feet (50 m)in non−residential areas.

1 “In half of a mile, make a legalU−turn.”

2 “Make a legal U−turn ahead.”

3 (Beep sound only)

The system announces the approach tothe final destination.

1 “Your destination is ahead.”

2 “You have arrived at your des-tination. The route guidance isnow finished.”

INFORMATIOND If the system cannot determine the

current vehicle position correctly(in cases of poorGPSsignal recep-tion), the voice guidance may bemade early or delayed.

D If you did not hear the voice guid-ance command, push the “MAP/VOICE” button to hear it again.

D To adjust the voice guidance vol-ume, see “Volume” on page 93.

RAV4_Navi_U

Finish

ROUTE GUIDANCE

75

When the vehicle is on the guidance route,thedistance and theestimated travel/arriv-al time to the destination are displayed.When the vehicle is not on the guidanceroute, the distance and the direction of thedestination are displayed.When driving on the guidance route andmore than one destination is set, the dis-tance and the estimated travel/arrival timefrom the current position to each destina-tion are displayed.1. Touch this button to display the fol-lowing screen.

2. Touch the number button to displaythe desired destination.

The distance, the estimated travel timeand theestimated arrival time from the cur-rent position to the selected destinationare displayed.

Estimated travel time is dis-played.

Estimated arrival time is dis-played.

To switch to estimated arrivaltime.

To switch to estimated traveltime.

Displayed while driving off theguidance route. The destina-tion direction is indicated byan arrow.

INFORMATIONWhen the vehicle is on the guidanceroute, the distance measured alongthe route is displayed. Travel timeand arrival time is calculated basedon the set vehicle speed information.(See page 111.) However, when thevehicle is not on the guidance route,the distance is the linear distance be-tween the current position and thedestination.

RAV4_Navi_U

Finish

Distance and time todestination

ROUTE GUIDANCE

76

Adding destinations and searching againfor the routes can be done.

1. Touch “Route”.

2. Touch “Add”.3. Input an additional destination inthe same way as the destinationsearch. (See “Destination search” onpage 43.)

4. Touch the desired “Add” to deter-mine the arrival order of the additionaldestination.

When more than one destination is set,you can change the arrival order of thedestinations.

1. Touch “Route”.

2. Touch “Reorder”.

3. Select the destination in the order ofarrival by touching the destination but-ton.Reordered number of arrival is displayedon the right side of the screen.Touching “Undo” will cancel each se-lected order number from the previouslyinput number.

RAV4_Navi_U

Finish

Setting and deletingdestination —— Adding destinations — Reordering destinations

ROUTE GUIDANCE

77

4. After selecting the destinations,touch “OK”.The system searches for the guidanceroute again, and displays the entire route.Even if “OK” is not touched, the entireroute is displayed automatically within afew seconds when the order is fixed.

A set destination can be deleted.

1. Touch “Route”.

2. Touch “Delete”.When more than one destination is set, alist will be displayed on the screen.

3. Touch the destination for deletion.“Delete All”: To delete all destinations onthe list.Amessage appears to confirm the requestto delete.

RAV4_Navi_U

Finish

— Deleting destinations

ROUTE GUIDANCE

78

4. To delete the destination(s), touch“Yes”.If “Yes” is touched, the data cannot be re-covered.If “No” is touched, the previous screenwillreturn.5. If more than one destination is set,touch “OK” after deleting the destina-tions.The system searches for the guidanceroute again, and displays the entire route.

You can designate the route conditions ofthe route to the destination.

1. Touch “Route”.

2. Touch “Search Condition”.

3. Touch “Quick”, “Quick1”, “Quick2”or “Short” and touch “OK”.

RAV4_Navi_U

Finish

Setting route —— Search condition

ROUTE GUIDANCE

79

The entire route from the starting point tothe destination is displayed.“Guide”: To start guidance.“Route”: To change a route. (See pages76 and 78.)

While the route guidance is operating, youcan change the route to detour around asection of the route where a delay iscaused by road repairs, or an accident,etc.

1. Touch “Route”.

2. Touch “Detour”.

RAV4_Navi_U

Finish

— Detour setting

ROUTE GUIDANCE

80

3. Select the button below to select thedesired detour distance.“1mile (km)”, “3miles (km)” or “5miles(km)”: Touch one of these buttons to startthe detour process. After detouring, thesystem returns to the original guidanceroute.“Whole Route”: By touching this button,the system will calculate an entire newroute to the destination.“Around Traffic”: If you touch this button,the system will search for the route basedon the traffic congestion information re-ceived from XMr NavTraffic. For details,see “XMr NavTraffic” on page 120.

This picture shows an example of how thesystem would guide around a delaycaused by a traffic jam.1 This position indicates the location of

a traffic jamcaused by road repairs oran accident.

2 This route indicates the detour sug-gested by the system.

INFORMATIOND When your vehicle is on a freeway,

the detour distance selections are5, 15, and 25 miles (km).

D The systemmay not be able to cal-culate adetour routedependingonthe selected distance and sur-rounding road conditions.

RAV4_Navi_U

Finish

ROUTE GUIDANCE

81

A number of choices are provided on theconditions which the systemuses to deter-mine the route to the destination.

1. Touch “Route”.

2. Touch “Route Preference” tochange the conditions that determinethe route to the destination.

3. Select the desired route preferenceby touching the button.Whensearching fora route, the systemwillavoid routes when the indicator is off.4. After choosing the desired routepreference, touch “OK”.

You can start the route guidance from theadjacent road.(ex. When route guidance is set on thefreeway, but the vehicle is driven parallelalong the freeway.)

1. Touch “Route”.

2. Touch “Start from Adjacent Road”.When there is noadjacent road, this buttonwill not be displayed.

RAV4_Navi_U

Finish

— Route preference— Starting route fromadjacent road

ROUTE GUIDANCE

82

Points of Interest such as gas stations andrestaurants can be displayed on the mapscreen. You can also set their location asa destination and use them for route guid-ance.

1. Touch “Map View”.

2. Touch “Display POI Icon” to displaya particular type of Point of Interest onthe screen.

A screen with a limited choice of Points ofInterest will be displayed. (To change thedisplayed POI, see page 114.)

D Selecting POIs to be displayedUp to 5 categories of icons can be dis-played on the screen.

Touch the desired Point of Interestcategory to display POI location sym-bols on the map screen.By selecting the desired POI category andthen touching “OK”, the selected POIicons are displayed on the map screen.To turn off the Points of Interest icon on themap screen, touch “Delete”.“Other POIs”: If the desired Point of Inter-est can not be found on the limited choicescreen, touch this button.“Local POI List”:When searching for thenearest Point of Interest, touch this button.Then choose one of the categories. Thesystem will list the points within 20 miles(32 km). (See page 83.)

RAV4_Navi_U

Finish

Map view —— Display POI icons

ROUTE GUIDANCE

83

Touch “Other POIs” on the “DisplayPOI icons” screen.When a Point of Interest category is se-lected from either the limited list or thecomplete list, the screen will display sym-bols of those locations on the map screen.

Select the desired POI categories.

Theselected category icon appears on thetop left of the screen.By selecting the desired POI category andthen touching “OK”, the selected POIicons are displayed on the map screen.If the desired POI category is not on thescreen, touch “List All Categories” to listall POI categories.

Select the desired POI categories fromthe list.

Theselected category icon appears on thetop left of the screen.By selecting the desired POI category andthen touching “OK”, the selected POIicons are displayed on the map screen.To return to the POI category selectionscreen, touch “More”.

D To display the local POI listPoints of Interest that are within 20 miles(32 km) of the current position will be listedfrom among the selected categories.

1. Touch “Local POI List” on the “Dis-play POI icons” screen.

2. Touch the button of the desiredPoint of Interest.The selected Points of Interest are dis-played on the map screen.“On Route”:When the indicator is illumi-nated by touching this button, the list of theitems searched along the route is dis-played.

RAV4_Navi_U

Finish

ROUTE GUIDANCE

84

D To set a POI as a destinationYou can select one of the Points of Interesticons on the map screen as a destinationand use it for route guidance.

1. Directly touch the Point of Interesticon that you want to set as a destina-tion.The map will shift so that the icon is cen-tered on the screen and overlaps with thecursor . At this time, the distance fromthe current position is displayed on thescreen. The distance shown is measuredas a straight line from the current vehicleposition to the POI.2. When the desired Point of Interestoverlaps with the cursor, touch “Enter”.

The screen changes and displays themaplocation of the selected destination androute preference. (See “Starting routeguidance” on page 65.)

1. Touch “Map View”.

2. Touch “Route Overview”.

The entire route from the current positionto the destination is displayed.“Guide”: To start guidance.“Route”: To change the route. (Seepages 76 and 78.)“TurnList”:The following screendisplaysthe list of the roads up to the destination.

RAV4_Navi_U

Finish

— Route overview

ROUTE GUIDANCE

85

You can scroll through the list of roads by

touching or . However, not all roadnames in the route may appear on the list.If a road changes its name without requir-ing a turn (such as on a street that runsthrough two or more cities), the namechange will not appear on the list. Thestreet names will be displayed in orderfrom the starting point, along with the dis-tance to the next turn.

These marks indicate thedirection in which you shouldturn at an intersection.

Touch “Map” on the “Turn List” screen.The point which you choose is displayedon the map screen.

1. Touch “Map View”.

2. Touch “Route Preview”.

RAV4_Navi_U

Finish

— Route preview

ROUTE GUIDANCE

86

: To indicate the next destination.

: To preview the route to the nextdestination.

: To preview the route to the nextdestination in fast−forward mode.

: To stop the preview.

: To review the route to the previousdestination or starting point.

: To review the route to the previousdestination or starting point infast−forward mode.

: To indicate the previous destina-tion or starting point.

It is possible to store the traveled route upto124miles (200 km) and retrace the routeon the display.

INFORMATIONThis feature is available on the mapwith more detailed map scale than 30mile (50 km).

Touch “Map View”.

RAV4_Navi_U

Finish

— Route trace

ROUTE GUIDANCE

87

“Record”: To start recording the routetrace.“Stop”: To stop recording the route trace.If you touch “Stop” to display the followingscreen.

Touching “Yes” stops recording and theroute trace remains displayed on thescreen.Touching “No” stops recording and theroute trace is erased.

RAV4_Navi_U

Finish

ROUTE GUIDANCE

88

RAV4_Navi_U

Finish

SECTION 4

ADVANCED FUNCTIONS

89

ADVANCED FUNCTIONS

Descriptions of functions for more effectiveuse

D Quick reference (“Menu” screen) 90. . . . . . . . . . . . . . . . . . . . . . . . .

D Quick reference (“Setup” screen) 91. . . . . . . . . . . . . . . . . . . . . . . . .

D Suspending and resuming guidance 92. . . . . . . . . . . . . . . . . . . . . . .

D Volume 93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D User selection 94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D My places 96. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Registering memory points 97. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing memory points 98. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting memory points 103. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Registering home 104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting home 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Registering area to avoid 105. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing area to avoid 106. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting area to avoid 109. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Deleting previous points 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Setup 110. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D XMr NavTraffic 120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

90

The “Menu” screen allows effective use of the navigation system. To display the “Menu”screen, push the “MENU” button.

1 “Suspend Guidance” or “ResumeGuidance”

Suspends or resumes guidance. 92. . . .2 “Volume”Sets the volume for voice guidance.

93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 “?”Function help for the “Menu”screen canbeviewed on this screen. 29. . . . . . . . . . . .4 “Map DVD”Displays information regarding the discversion or covered area. 180. . . . . . . . . .

5 “Select User”Up to 3 different settings for different userscan be memorized. 94. . . . . . . . . . . . . . .6 “XM NavTraffic”Sets XMr NavTraffic information.

120. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 “Setup”Enables various settings for thenavigationsystem. 91, 110. . . . . . . . . . . . . . . . . . . . .8 “My Places”Enables changes to “Memory points”,“Home” and “Areas to avoid”. Enablesdeletion of the previous point. 96. . . . . .

RAV4_Navi_U

Finish

Quick reference (“Menu” screen)

ADVANCED FUNCTIONS

91

The items shown on the “Setup” screen can be set. To display the “Setup” screen, pushthe “MENU” button and touch “Setup”.

1 “Unit of Measurement”Thedistance units “km”or“miles” canbeselected. 111. . . . . . . . . . . . . . . . . . . . . . . .2 “Estimated Travel Time”The system to display the travel time andthe arrival time to the destination on theroute guidance screen can be set.

111. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 “Keyboard Layout”Key layout can be changed. 112. . . . . .4 “Time Zone”The desired time zone can be selected.

113. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 “ Function”The choice whether to display each touchscreen button and current street name onthe map screen can be set. 114. . . . . . .

6 “Display POI Icons”A selection of 6 icons displayed on the“Display POI Icons” top screen is possible.

114. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 “Display Building Shapes”Selection of either ON or OFF to displaythe building shape on the map screen ispossible. 115. . . . . . . . . . . . . . . . . . . . . . .8 “Traffic Restrict. Notification”Notification of seasonal restrictions canbeselected. 116. . . . . . . . . . . . . . . . . . . . . . .9 “Voice Guidance in All Modes”Voice guidance can be set in all modes.

116. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 “Auto Voice Guidance”Automatic voice guidance can be set.

117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

Quick reference (“Setup” screen)

ADVANCED FUNCTIONS

92

11 “Pop−up Message”Selection of either ON or OFF to displaythe pop−up message is possible.

117. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 “Calibration”Adjustment of the current vehicle positionmark can be done manually. 118. . . . . .13 “Default”This touch screen button initializes all ofthe settings. 110. . . . . . . . . . . . . . . . . . . .14 “?”Function help for the “Setup” screen canbe viewed. 29. . . . . . . . . . . . . . . . . . . . . . .

D To suspend guidance

1. Push the “MENU” button.

2. Touch “Suspend Guidance”.

INFORMATIONWithout route guidance, “SuspendGuidance” cannot be used.

The screen will return to the current posi-tion map without route guidance.

RAV4_Navi_U

Finish

Suspending and resumingguidance

ADVANCED FUNCTIONS

93

D To resume guidance1. Push the “MENU” button.

2. Touch “Resume Guidance”.

The screen will change to the current posi-tion map with route guidance.

The voice guidance volume can be ad-justed or switched off.

1. Push the “MENU” button.

2. Touch “Volume”.

To adjust the volume, select the desiredlevel by touching the appropriate number.If voice guidance is not needed, touch“OFF” to disable the feature.

When selected the number or “OFF” willbe highlighted.3. Touch “OK” to confirm your selec-tion.

RAV4_Navi_U

Finish

Volume

ADVANCED FUNCTIONS

94

INFORMATIONDuring route guidance, the voiceguidance continues even if the navi-gation screen is changed to otherscreens.

“Adaptive Volume Control”: By turning“Adaptive Volume Control” on, the volumeis turned up automatically when the ve-hicle speed exceeds 50 mph (80 km/h).To turn the “Adaptive Volume Control”system on, touch the button. The indicatorwill be highlighted.

The system can memorize the followingsettings for up to three users.D Map directionD Map scaleD Map configurationD Guidance modeD SetupD VolumeD LanguageD Route traceD Travel time/arrival timeD Right screen of dual mapD Route preferenceD Maintenance notification

1. Push the “MENU” button.

2. Touch “Select User”.

RAV4_Navi_U

Finish

User selection

ADVANCED FUNCTIONS

95

D To register

1. Touch “Memorize”.The confirmation screen will be displayed.

2. Toregister, touch“Yes”. To return tothe previous screen, touch “No” or

.

When a button that is already registered istouched, the following screen appears.

To replace, touch “Yes”. To cancel the re-placement, touch “No” or .

D To change user

Touch “User number”.

The above message appears, then themap screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

96

D To delete user

1. Touch “Delete”.The confirmation screen will be displayed.

2. To delete, touch “Yes”. To return tothe previous screen, touch “No” or

.

Points or areas on the map can be regis-tered.The registered points can be used on the“Destination” screen. (See“—Destinationsearch byHome” on page 46, “—Destina-tion search by Quick access” on page 46and “—Destination search byMemory” onpage 59.)Registered areasareavoided at the timeofroute search.

1. Push the “MENU” button.

2. Touch “My Places”.

RAV4_Navi_U

Finish

My places —

ADVANCED FUNCTIONS

97

On this screen, the following operationscan be performed.1 Registers memory points

(See “—Registering memory points”on page 97.)

2 Edits memory points(See “ — Editing memory points” onpage 98.)

3 Deletes memory points(See “—Deleting memory points” onpage 103.)

4 Registers or deletes home(See “— Registering home” on page104 or “ — Deleting home” on page105.)

5 Registers areas to avoid(See “ — Registering area to avoid”on page 105.)

6 Edits areas to avoid(See “ — Editing area to avoid” onpage 106.)

7 Deletes areas to avoid(See “ — Deleting area to avoid” onpage 109.)

8 Deletes previous points(See “—Deleting previous points” onpage 110.)

9 Number of remaining memorypoints

10 Number of remaining areas toavoid

1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Register”.

4. Enter the location in the same wayas for a destination search. (See “Des-tination search” on page 43.)After memory point registration is com-pleted, the “Memory Point” screen will bedisplayed.

RAV4_Navi_U

Finish

— Registering memorypoints

ADVANCED FUNCTIONS

98

5. Touch “OK”.To edit registered information, see “ —Editing memory points” on page 98.

INFORMATIONUp to 106 memory points can be reg-istered.

The icon, attribute, name, location and/ortelephone number of a registered memorypoint can be edited.1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Edit”.

4. Touch the desired memory pointbutton.

RAV4_Navi_U

Finish

— Editing memory points

ADVANCED FUNCTIONS

99

5. Touch the button to be edited.“Icon”: To select icons to be displayed onthe map. (See page 99.)“Quick Access”: To set an attribute.Memory points with a set attribute can beused as a “Quick access” or “Home” but-ton. (See page 100.)“Name”: To edit memory point names.The names can be displayed on the map.(See page 101.)“Location”: To edit location information.(See page 102.)“Phone #”: To edit telephone numbers.(See page 103.)6. Touch “OK”.

D To change “Icon”1. Touch“Icon”onthe“MemoryPoint”screen.

2. Touch the desired icon.Turn the page by touching “Page 1”,“Page 2” or “with Sound”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

100

SOUND ICONSWhen the vehicle approaches thememorypoint, the selected sound will be heard.1. Touch“withSound”on the“ChangeIcon” screen.

2. Touch the desired sound icon.Thenext screen appearswhen “Bell (withDirection)” is touched.

Touch either or to adjust thedirection. Touch “Enter”.The bell sounds only when the vehicle ap-proaches this point in thedirection that hasbeen set.

D To change “Quick Access”It is possible to change attributes of thequick access points. Memory points witha set attribute can be used as a “QuickAccess” or “Home” touch screen button.(See “ — Destination search by Home” onpage 46 and “ — Destination search byQuick access” on page 46.)1. Touch “Quick Access” on the“Memory Point” screen.

2. Touch the desired attribute.It is possible to replace a registered attrib-ute.

3. To replace the attribute, touch“Yes”. To return to thepreviousscreen,touch “No” or .

INFORMATIONOne“Home” and five “QuickAccess”can be set.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

101

DELETING “Quick Access”

1. Touch “Del.”.

2. To delete an attribute, touch “Yes”.To return to the previous screen, touch“No” or .

D To change “Name”1. Touch “Name” on the “MemoryPoint” screen.

2. Enter the name using the alphanu-meric keys.Up to 24 letters can be entered.3. Touch “OK”.The previous screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

102

DISPLAYING MEMORY POINT NAMESThe name of a memory point that may bedisplayed on the map can be set.

To show the name, touch “ON” on the“Memory Point” screen. Tonot show it,touch “OFF”.

D To change “Location”1. Touch “Location” on the “MemoryPoint” screen.

2. Touch the eight directional touchscreen button to move the cursor tothe desired point on the map.3. Touch “Enter”.The previous screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

103

D To change “Phone #” (telephonenumber)

1. Touch “Phone #” on the “MemoryPoint” screen.

2. Enter the number using numberkeys.3. Touch “OK”.The previous screen will be displayed.

1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Delete”.

4. Touch the button to be deleted.“Delete All”: To delete all memory pointsin the system.5. To delete the memory point, touch“Yes”. To cancel the deletion, touch“No”.

RAV4_Navi_U

Finish

— Deleting memory points

ADVANCED FUNCTIONS

104

If home has been registered, that informa-tion can be recalled by using the “Home”touch screen button on the “Destination”screen. (See “ — Destination search byHome” on page 46.)1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Register”.

4. Enter the location in the same wayas for a destination search. (See “Des-tination search” on page 43.)

When registration of home is completed,the “Memory Point” screen will be dis-played.

5. Touch “OK”.To edit registered information, see “ —Editing memory points” on page 98.

RAV4_Navi_U

Finish

— Registering home

ADVANCED FUNCTIONS

105

1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Delete”.4. To delete home, touch “Yes”. Tocancel the deletion, touch “No”.

Areas you want to avoid because of trafficjams, construction work or other reasonscan be registered as areas to avoid.1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Register”.

4. Enter the location in the same wayas for a destination search, or displaythemap of the area to be avoided. (See“Destination search” on page 43.)

5. Touch the eight directional touchscreen button to move the cursor tothe desired point on the map.6. Touch “Enter”.

RAV4_Navi_U

Finish

— Deleting home — Registering area to avoid

ADVANCED FUNCTIONS

106

7. Touch either or tochange the size of the area to beavoided.8. Touch “OK”.

INFORMATIOND If a destination is input in the area

to avoid or the route calculationcannot be made without runningthrough the area to avoid, a routepassing through the area to beavoided may be shown.

D Up to 10 locations can be regis-tered as points/areas to avoid. Ifthere are 10 locations already reg-istered, the followingmessage willbe displayed: “Unable to registeradditional points. Perform opera-tion again after deleting unneces-sary points.”.

The name, location and/or area size of aregistered area can be edited.1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Edit”.

4. Touch the desired area button.

RAV4_Navi_U

Finish

— Editing area to avoid

ADVANCED FUNCTIONS

107

5. Touch the button to be edited.“Name”: To edit the name of the area toavoid. The names can be displayed on themap. (See page 107.)“Location”: To edit area location. (Seepage 108.)“Area Size”: To edit area size. (See page109.)“Active”:To turn onor off thearea toavoidfeature. To turn on the feature touch “ON”on the “Edit Area to Avoid” screen. To turnoff the feature touch “OFF” on the “EditArea to Avoid” screen.6. Touch “OK”.

D To change “Name”1. Touch “Name” on the “Edit Area toAvoid” screen.

2. Enter the name using alphanumerickeys.Up to 24 letters can be entered.3. Touch “OK”.The previous screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

108

DISPLAYINGNAMESOFAREAS TOBEAVOIDEDThe name of an area to be avoided thatmay be displayed on the map can be set.

To show the name, touch “ON” on the“Edit Area to Avoid” screen. To notshow it, touch “OFF”.

D To change “Location”1. Touch “Location” on the “Edit Areato Avoid” screen.

2. Touch the eight directional touchscreen button to move the cursor tothe desired point on the map.3. Touch “Enter”.The previous screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

109

D To change “Area Size”1. Touch “Area Size” on the “Edit Areato Avoid” screen.

2. Touch either or tochange the size of the area to beavoided.3. Touch “OK”.The previous screen will be displayed.

1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Delete”.

4. Touch the button to be deleted.“DeleteAll”:Todelete all registered areasto avoid in the system.5. To delete the area, touch “Yes”. Tocancel the deletion, touch “No”.

RAV4_Navi_U

Finish

— Deleting area to avoid

ADVANCED FUNCTIONS

110

The previous destination can be deleted.1. Push the “MENU” button.2. Touch “My Places” on the “Menu”screen.

3. Touch “Delete Previous Points”.

4. Touch thebutton youwant todelete.“Delete All”: To delete all previous pointsin the system.

5. To delete the point, touch “Yes”. Tocancel the deletion, touch “No”.

Setting the items shown on the “Setup”screen can be done. (See page 91.)

1. Push the “MENU” button.

2. Touch “Setup”.

3. Touch the items to be set.

4. Touch “OK”.The previous screen will be displayed.

INFORMATIONTo reset all setup items, touch “De-fault”.

RAV4_Navi_U

Finish

— Deleting previous points Setup

ADVANCED FUNCTIONS

111

D Unit of MeasurementUnit of Measurement can be changed.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

3. Touch “km” or “miles” of “Unit ofMeasurement” to choose the distanceunit.The selected button is highlighted.4. Touch “OK”.

INFORMATIONThis function is available only in En-glish or Spanish. To switch language,see “Selecting a language” on page141.

D Estimated travel timeThe speed that is used for the calculationof the estimated travel time and the esti-mated arrival time can be set.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

3. Touch “Set Speed” of the “Esti-mated Travel Time”.

4. Touch or to set the averagevehicle speeds for “Residential”, “Mainstreet”, and “Freeway”.To set the default speeds, touch “De-fault”.5. Aftersettingof thedesiredspeeds iscompleted, touch “OK”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

112

INFORMATIOND The displayed time to the destina-

tion is theapproximatedriving timethat is calculated based on the se-lected speeds and the actual posi-tion along the guidance route.

D The time shown on the screenmayvary greatly depending on prog-ress along the route, whichmay beaffected by road conditions suchas traffic jams, and constructionwork.

D It is possible to display up to 99hours 59 minutes.

D Input key layoutKey layout can be changed.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

3. Touch “ABC” or “QWE” of “Key-board Layout” to choose the input keylayout.LAYOUT TYPE

" “ABC” type

" “QWE” type

The selected button is highlighted.4. Touch “OK”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

113

D Time zoneTime zone can be changed.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

3. Touch “Change” of “Time Zone”.The “Adjust Time Zone” screen will be dis-played on the display.

4. Touch the desired time zone.The selected button is highlighted.“Daylight Saving Time”: Daylight savingtime can be set or cancelled.To set daylight saving time, touch “ON”,and to cancel it, touch “OFF”.5. Touch “OK”.

When you touch “Other”, this screen isdisplayed. Touch “Y”or “B” to adjust thetime zone.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

114

D Screen layout function( Function)

Each touch screen button and currentstreet name on themap screen can be dis-played or hidden.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

3. Touch“Change” of “ Function”.

4. Touch the button to be turned off.The button becomes dimmed.To set the default, touch “Default”.5. Touch “OK”.

D POI category change(Display POI Icons)

Select from among the 6 icons displayedon the “Display POI Icons” top screen, sothat setting of the icons to be displayed onthe map screen can be done easily.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch to display page 2 of the“Setup” screen.

3. Touch “Change” of “Display POIIcons”.

4. Touch the category button to bechanged.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

115

5. Touch the category button to be dis-played on the “Display POI Icons” topscreen.6. Touch “OK”.

D Display of building shapeWhen the “Display Building Shapes” fea-ture is turnedon, thesystemwill display thebuilding shape on the map screen using ascale of 150 feet (50m) to300 feet (100m).To turn the “Display Building Shapes” on:1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch to display page 2 of the“Setup” screen.

3. Touch “ON” of “Display BuildingShapes”.

The selected button is highlighted.4. Touch “OK”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

116

D Notifying traffic restrictionWhen the “Traffic Restrict. Notification”feature is turned on, the system notifiesyou of traffic or seasonal restrictions.To turn the “Traffic Restrict. Notification”on:1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch to display page 2 of the“Setup” screen.

3. Touch“ON”of“TrafficRestrict.Noti-fication”.

The selected button is highlighted.4. Touch “OK”.

D Voice guidance in all modesWhen the “Voice Guidance in All Modes”feature is turned on, the voice guidance inall modes can be heard.When the “Voice Guidance in All Modes”feature is turned off, voice guidance can-not beheardwhenusing theaudio system.To turn the “Voice Guidance in All Modes”on:1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch to display page 2 of the“Setup” screen.

3. Touch “ON” of “Voice Guidance inAll Modes”.The selected button is highlighted.4. Touch “OK”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

117

D Auto voice guidanceWhen the “AutoVoiceGuidance” feature isturned on, the voice guidance can beheard automatically.When the “AutoVoiceGuidance” feature isturned off, the voice guidance can beheard only if the “MAP/VOICE” button ispushed.To turn the “Auto Voice Guidance” modeon:1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch twice to display page 2 ofthe “Setup” screen.

3. Touch “ON” of “Auto Voice Guid-ance”.The selected button is highlighted.4. Touch “OK”.

D Pop−up messageWhen the “Pop−upMessage” is turned on,the pop−up message will be displayed.To turn the “Pop−up Message” on:1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch twice to display page 3 ofthe “Setup” screen.

3. Touch “ON” of “Pop−up Message”.The selected button is highlighted.4. Touch “OK”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

118

When the “Pop−upMessage” is turned off,the following messages will not displayed.

Thismessage appears when the system isin the POI mode and the map scale is over0.5 miles (800 m).

The message appears when the map isswitched to the dual map screen mode.

D Currentposition/tirechangecalibra-tion

The current vehicle position mark can beadjusted manually. Miscalculation of thedistance caused by tire replacement canalso be adjusted.1. Push the “MENU” button.2. Touch “Setup” on the “Menu”screen.

Then touch twice to display page 3 ofthe “Setup” screen.

3. Touch “Adjust” of “Calibration”.

4. Touch the desired button.

INFORMATIONFor additional information on the ac-curacy of a current vehicle position,see “Limitations of the navigationsystem” on page 178.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

119

POSITION/DIRECTION CALIBRATIONWhen driving, the current vehicle positionmark will be automatically corrected byGPS signals. If GPS reception is poor dueto location, you can manually adjust thecurrent vehicle position mark.

1. Touch “Position/Direction”.

2. Touch the eight directional touchscreen button to move the cursor tothe desired point on the map.

3. Touch “Enter”.

4. Touch either or to adjust thedirection of the current vehicle positionmark.5. Touch “Enter”.The map screen will be displayed.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

120

TIRE CHANGE CALIBRATIONThe tire change calibration function will beused when replacing the tires. This func-tion will adjust the miscalculation causedby the circumference difference betweenthe old and new tires. If this procedure isnot performedwhen the tires are replaced,the current vehicle position mark may beincorrectly displayed.

To perform a distance calibration pro-cedure, touch “Tire Change” on the“Calibration” screen.The message appears and the quick dis-tance calibration is automatically started.A few seconds later, a map screen will bedisplayed.

TheXMrNavTraffic service that allows thenavigation system to display traffic infor-mation on themap is available if your satel-lite radio tuner can receive traffic informa-tion.For details about the XMr NavTraffic ser-vice coverage area, refer to www.xmra-dio.com.D Howtoactivate theXMrNavTrafficser-

viceTo receive the XMr NavTraffic service,it is necessary to activate the service.To activate the service, an extra fee isrequired in addition to subscription feesfor the XMr Satellite Radio. For detailsabout service and activation, call XMrListener Care at 1−800−967−2346.

Customers should have their radio IDready; the radio ID can be found by select-ing “channel 000” on the radio. For details,see “Displaying the radio ID” on page 152.All fees and service are the responsibilityof the XMr Satellite Radio and are subjectto change.

INFORMATIONCargo loadedon the roof luggagecar-rier, especiallymetal objects,mayad-versely affect the reception of XMrSatellite Radio.

RAV4_Navi_U

Finish

XMr NavTraffic

ADVANCED FUNCTIONS

121

1. Push the “MENU” button.

2. Touch “XM NavTraffic”.

On this screen, the following operationscan be performed.1 Show XMr NavTraffic InformationTraffic information isdisplayed on themap.(See page 122.)2 Auto Avoid TrafficIf any heavy congestion ormoderate traffichas been detected on the guidance route,it may be possible for you to select anotherroute offered by the system. (See page123.)3 Traffic Voice GuidanceTraffic information is provided using voiceguidance. (See page 124.)4 Show Free Flowing TrafficFreely flowing traffic is shown by the arrowon the map. (See page 124.)

INFORMATIONWhen“OFF” for “ShowXMNavTrafficInformation” is selected, “AutoAvoidTraffic”, “TrafficVoiceGuidance”and“Show Free Flowing Traffic” will notoperate.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

122

(a) Show XMr NavTraffic informationXMr NavTraffic information is displayedon the map.

" Map screen

" Freeway information screen

1 XMr NavTraffic iconWhen any traffic information has beenreceived, the XMr NavTraffic icon willappear on the map screen. Touching theXMrNavTraffic iconon thescreenwill startvoice guidance for the traffic information.(See page 123.)

INFORMATIONWhen the XMr NavTraffic icon istouched,voiceguidance for thetrafficinformationwill start even if “OFF” for“Traffic Voice Guidance” is selected.

2 XMr NavTraffic information arrowWhen any XMrNavTraffic information hasbeen received, the XMr NavTraffic infor-mation arrow will appear on the mapscreen. The color of the arrow changesdepending on the traffic information re-ceived.“Orange”: Heavy congestion“Yellow”: Moderate traffic“Green”: Freely flowing traffic

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

123

3 XMr NavTraffic indicatorWhen any XMrNavTraffic information hasbeen received, the XMrNavTraffic indica-tor will appear on the screen. The color ofthe indicator changes depending on thetraffic information received.“White”: Traffic information has been re-ceived.“Yellow”: Traffic restriction information onthe guidance route has been received(touch switch*).“Orange”: Congestion information on theguidance route has been received (touchswitch*).*: Touching the XMr NavTraffic indicatorwill start voice guidance.

Touch“ON”of the“ShowXMNavTrafficInformation.”.

(b) Auto Avoid TrafficThe guidance route automaticallychanges to another route to avoid heavycongestion.

Touch “ON”of the “AutoAvoid Traffic”.

When congestion information about theguidance route has been received, ascreen will appear to ask you whether toreroute to avoid the congestion.If youwish to reroute, touch “Yes”. Anoth-er route to allow you to avoid the conges-tion will appear.If you do not wish to reroute, touch “No”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

124

(c) Traffic Voice GuidanceYou can receive congestion informationthrough voice guidance while beingguided to your destination.

Touch “ON” of the “Traffic Voice Guid-ance”.

INFORMATIONThis function is available only in En-glish. To switch language, see “Se-lecting a language” on page 141.

(d) Show Free Flowing TrafficFreely flowing traffic is shown with the ar-row.

Touch “ON” of the “Show Free FlowingTraffic”.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

125

(e) XMr NavTraffic text informationWhen you touch the XMr NavTraffic iconon the map, the XMr NavTraffic info. barwill appear on the upper part of the screen.

1. Touch “Info.” to display the “TrafficInformation” screen.

2. Touch “Detail” to display detailedtraffic event information.

RAV4_Navi_U

Finish

ADVANCED FUNCTIONS

126

RAV4_Navi_U

Finish

SECTION 5

OTHER FUNCTIONS

127

OTHER FUNCTIONS

D Maintenance information 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Maintenance information setting 128. . . . . . . . . . . . . . . . . . . . . . .Dealer setting 130. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Calendar with memo 132. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Adding a memo 134. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing a memo 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Memo list 135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Screen adjustment 137. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Screen setting 138. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Beep setting 141. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Selecting a language 141. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

OTHER FUNCTIONS

128

When the navigation system is turned on,the “Information” screen displayswhen it istime to replace a part or certain compo-nents. (See page 24.)

1. Push the “INFO” button.

2. Touch “Maintenance”.

3. Touch the desired button.For details of each touch screen button,see “INFORMATION ITEMS”onpage129.“Delete All”: To cancel all conditionswhich have been inputted.“Reset All”: To reset the item which hassatisfied a condition.“Set Dealer”: To register or edit dealer in-formation. (See “ — Dealer setting” onpage 130.)If“ON” is selected, thesystemgivesmain-tenance information with the “Information”screenwhen the system is turned on. (Seepage 24.)If “OFF” is selected, the “Information”screen is disabled.When thevehicle needs tobeserviced, thetouch screen button color will change toorange.

RAV4_Navi_U

Finish

Maintenance information —— Maintenance informationsetting

OTHER FUNCTIONS

129

INFORMATION ITEMS“ENGINE OIL”: Replace engine oil“OIL FILTER”: Replace engine oil filter“ROTATION”: Rotate tires“TIRES”: Replace tires“BATTERY”: Replace battery“BRAKE PAD”: Replace brake linings“WIPERS”: Replace wiper blades“LLC”: Replace engine coolant“BRAKE OIL”: Replace brake fluid“ATF”: Replace ATF (Automatic Trans-mission Fluid)“SERVICE”: Scheduled maintenance“AIR FILTER”: Replace air filter“PERSONAL”: New information itemscan be created separately from providedones.

4. Input the conditions.Notice of “Date”: The next maintenancedate can be input.Notice of “Distance”: The driving dis-tance until the next maintenance checkcan be input.“Delete”: To cancel the date and distanceconditions.“Reset”: To reset the date and distanceconditions.5. Touch “OK”.The screen then returns to the “Mainte-nance” screen.

INFORMATIOND For scheduled maintenance infor-

mation, please refer to the “Sched-uledMaintenanceGuide” or “Own-er’s Manual Supplement”.

D Depending on driving or road con-ditions, the actual date and dis-tance may differ from the storeddate and distance in the system.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

130

It is possible to register a dealer in the sys-tem. With dealer information registered,route guidance to the dealer is available.1. Push the “INFO” button.2. Touch “Maintenance” on the “Infor-mation” screen.3. Touch “Set Dealer” on the “Mainte-nance” screen.

4. If thedealer hasnot been registered,enter the location of the dealer in thesame way as for a destination search.(See “Destination search” on page 43.)When “Set Dealer” registration is finished,the “Edit Dealer” screen will be displayed.

5. Touch the button to be edited.“Dealer”: To enter the name of a dealer.(See page 131.)“Contact”: To enter the name of a dealermember. (See page 131.)“Location”: To set a location. (See page131.)“Phone #”: To set a telephone number.(See page 132.)“Delete Dealer”: To delete the dealer in-formation displayed on the screen.

“Enter ”: To set the displayed dealer asa destination. (See “Starting route guid-ance” on page 65.)

RAV4_Navi_U

Finish

— Dealer setting

OTHER FUNCTIONS

131

D To edit “Dealer” or “Contact”1. Touch “Dealer” or “Contact” on the“Edit Dealer” screen.

2. Enter the name using the alphanu-meric keys.Up to 24 letters can be entered.3. Touch “OK”.The previous screen will be displayed.

D To edit “Location”1. Touch “Location” on the “Edit Deal-er” screen.

2. Touch the eight directional touchscreen button to move the cursor tothe desired point on the map.3. Touch “Enter”.The previous screen will be displayed.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

132

D To edit “Phone #” (telephone num-ber)

1. Touch “Phone #” on the “Edit Deal-er” screen.

2. Enter the number using numberkeys.3. Touch “OK”.The previous screen will be displayed.

It is possible to enter memos for particulardateson thecalendar. The system informsyou of the memo entry when the system isturned on. (See page 25.)Memos can also be used for route guid-ance if thememo has been registered withlocation information.

1. Push the “INFO” button.

2. Touch “Calendar”.

RAV4_Navi_U

Finish

Calendar with memo —

OTHER FUNCTIONS

133

On this screen, the current date is high-lighted in yellow.

or : To change month.

or : To change year.

“Today”:Todisplay the currentmonth cal-endar (if another month will be displayed).“List”: To display the list of registered me-mos. (See “ — Memo list” on page 135.)Touching a date button on the “Calendar”screen displays the “Memo” screen.

Memos can be edited by touching the listbutton. (See “—Editing amemo” on page135.)“Add Memo”: To add a memo. (See “ —Adding a memo” on page 134.)“Markf”:To change the color of themarkdisplayed next to the date. To default themark color, touch “Delete” on the “Markcolor” screen.“Datef”:To change the color of the date.To default the date color, touch “Delete”on the “Date color” screen.“Prev. Day”: To go to the “Memo” screenof the previous date.“Today”: To go to the “Memo” screen forthe current day.“Next Day”: To go to the “Memo” screenof the next date.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

134

If a memo is added, the system informs ofthememoentrywhen the system is startedon the memo date. (See page 25.)1. Push the “INFO” button.2. Touch “Calendar” on the “Informa-tion” screen.3. Touch the date you want to add amemo on the “Calendar” screen.

4. Touch “Add Memo”.Up to 100 memos can be added.

5. Touch “Memo”.

6. Enter text using the keys.Up to 24 letters can be entered.After entering the text, touch “OK” at thebottom right of the screen.

7. When registering informationonthememo, touch “Location”.A screen similar to the destination searchscreen appears. Search the same way assearching a destination. (See “Destinationsearch” on page 43.)

RAV4_Navi_U

Finish

— Adding a memo

OTHER FUNCTIONS

135

The registered memo can be edited.1. Push the “INFO” button.2. Touch “Calendar” on the “Informa-tion” screen.3. Touch the day you want to edit amemo on the “Calendar” screen.

4. Touch the memo to be edited.

5. Touch the item to be edited.“Memo”: To edit a memo. (See “ — Add-ing a memo” on page 134.)“Location”: To change a registered loca-tion. (See “ — Adding a memo” on page134.)

“Enter ”: To set the registered locationasadestination. (See “Starting route guid-ance” on page 65.)“Delete”: To delete the memo.

It is possible to display a memo list by set-ting a condition.1. Push the “INFO” button.2. Touch “Calendar” on the “Informa-tion” screen.3. Touch “List” on the “Calendar”screen.

4. Touch the desired search conditionto list the memos.“ThisWeek”: To display the list ofmemosfor the current week.“This Month”: To display the list of me-mos for the current month.“Future”: To display a list of future me-mos.“Past”: To display the list of past memos.“All”: To display the list of all memos.“Period”: To display the list of memos fora specified period. (See page 136.)

RAV4_Navi_U

Finish

— Editing a memo — Memo list

OTHER FUNCTIONS

136

5. To delete and/or edit the memo,touch the desired memo button.“Delete All”: To delete all the displayedmemos.A message will be displayed.6. Todelete, touch“Yes”. Tocancel thedeletion, touch “No”.

D Todisplaymemos foraspecifiedpe-riod of time

1. Touch “Period” on the “MemoSearch” screen.

2. Enter the period using the numeralkeys.The period from January 1, 2007 throughDecember 31, 2026 can be set for search-ing.3. Aftersetting theperiod, touch“OK”.The “Memo List” screen will be displayed.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

137

You can adjust thebrightness and contrastof the screen. Youcanalso turn thedisplayoff, and change the screen to either day ornight mode.D ContrastandbrightnessadjustmentThe brightness and contrast of the screencan be adjusted depending on the bright-ness of your surroundings. You can alsoturn the display off.

1. Push the “DISP/TILT” button.

2. Touch the desired button to adjustcontrast and brightness.“Contrast” “+”: Strengthens the contrastof the screen.“Contrast” “–”:Weakens the contrast ofthe screen.“Brightness” “+”: Brightens the screen.“Brightness” “–”: Darkens the screen.3. After adjusting the screen, touch“OK”.The screen goes off when “Screen Off” istouched. To turn the display screen backon, push any button such as “DISP/TILT”,etc. The selected screen appears.

INFORMATIONWhen you donot touch any button onthe “Display” screen for 20 seconds,thepreviousscreenwill bedisplayed.

RAV4_Navi_U

Finish

Screen adjustment

OTHER FUNCTIONS

138

D Changing between day mode andnight mode

Depending on the position of the headlightswitch, the screen changes to the daymode or night mode.

To display the screen in the day modeeven with the headlight switch on,touch “Day Mode” on the adjustmentscreen forbrightnessandcontrast con-trol.If the screen is set in the daymodewith theheadlight switch turnedon, this condition ismemorized in the systemevenwith theen-gine turned off.

1. Push the “INFO” button.

2. Touch “Screen Setting”.

RAV4_Navi_U

Finish

Screen setting

OTHER FUNCTIONS

139

(a) Automatic transitionYou can select a function that enables au-tomatic return to the navigation screenfrom the audio screen.

Select “ON” or “OFF” and then touch“OK”.“ON”:Thenavigation screen automatical-ly returns from the audio screen 20 sec-onds after the end of audio screen opera-tion.“OFF”: The audio screen remains on.

(b) Switch colorYou can select the color of the touchscreen buttons.

Select “Green” or “Orange” and thentouch “OK”.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

140

(c) Delete personal dataThe following personal data can be de-leted or returned to their default settings:D Maintenance conditionsD Maintenance information “off” set-

tingD Memory pointsD Areas to avoidD Previous pointsD Route traceD User selection settingsThis function is available onlywhen the ve-hicle is not moving.

1. Touch “Delete personal data”.The “Delete personal data” screen ap-pears.

2. Touch “Delete”.The “Confirmation to delete all personaldata” screen appears.

3. Touch “Yes”.

RAV4_Navi_U

Finish

OTHER FUNCTIONS

141

You can set a beep sound off.

1. Push the “INFO” button.

2. Touch “Beep Off”.“Beep Off” is highlighted.To switch the beep sound on, touch “BeepOff” again.

The language of the touch screen buttons,pop−upmessages and the voice guidancecan be changed.

1. Push the “INFO” button.

2. Touch “Language”.

RAV4_Navi_U

Finish

Beep setting Selecting a language

OTHER FUNCTIONS

142

3. Touch “English”, “Français” or “Es-pañol” to select a language.If a screen other than for the navigationsystem is displayed, the current screenwould change to the “CAUTION”screenbypushing the “MAP/VOICE”, “DEST” or“MENU” button.

4. Touch “OK”.The language is changed and the screenreturns to the map display.

RAV4_Navi_U

Finish

SECTION 6

AUDIO SYSTEM

143

AUDIO SYSTEMD Quick reference 144. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Using your audio system 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Some basics 145. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Radio operation 149. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Radio operation (XMr Satellite Radio broadcast) 151. . . . . . . . .CD player operation 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Audio remote controls 169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Audio system operating hints 170. . . . . . . . . . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

AUDIO SYSTEM

144

Operations such as selecting a preset station and adjusting the sound balance are car-ried out on the touch screen. To display the audio screen, push the “AUDIO” button.

1 Function menu display screenTo control the radio or CD player,touch the touch screen buttons. Fordetails, see page 147.

2 “AUDIO” buttonPush this button to display the audiocontrol screen. For details, see page146.

3 “ ” buttonPush this button to insert or eject adisc. For details, see pages 158 and160.

4 “DISC·AUX” buttonPush this button to turn the CDplayerand AUX on. For details, see pages146, 149 and 160.

5 “FM” buttonPush this button to choose anFMsta-tion. For details, see pages 146 and149.

6 “AM·SAT” buttonPush this button to choose an AM orSAT station. For details, see pages146 and 149.

7 “TUNE·SEEK/TRACK” buttonPush either side of this button to stepup or down the frequency, or to ac-cess a desired track or file. For de-tails, see pages 149, 151, 154, 161and 165.

8 “PWR·VOL” knobPush this knob to turn the audio sys-temonandoff, and turn it to adjust thevolume. For details, see page 146.

RAV4_Navi_U

Finish

Quick reference

AUDIO SYSTEM

145

This section describes some of the basicfeatures of your audio system. Some in-formation may not pertain to your system.Vehicles with smart key system —Your audio system works when the “EN-GINE START STOP” switch is in ACCES-SORY or IGNITION ON mode.Vehicles without smart key system —Your audio system works when the engineswitch is in “ACC” or “ON” position.

NOTICE

Toprevent thebattery frombeingdis-charged, do not leave the audio sys-tem on longer than necessary whenthe engine is not running.

This device complies with part 15 of theFCC Rules and RSS−210. Operation issubject to the following two conditions:(1) This device may not cause harmfulinterference, and (2) this device mustaccept any interference received, in-cluding interference that may cause un-desired operation.

CAUTION: Changes or modificationsnot expressly approved by theparty re-sponsible for compliance could voidthe user’s authority to operate theequipment.D Laser productsD Do not take this unit apart or at-

tempt to make any changesyourself. This is an intricate unitthat uses a laser pickup to re-trieve information from the sur-faceof compact discs. The laseris carefully shielded so that itsrays remain inside the cabinet.Therefore, never try to disas-semble the player or alter any ofits parts since you may be ex-posed to laser rays and danger-ous voltages.

D This product utilizes a laser.Use of controls or adjustmentsor performance of proceduresother than those specified here-in may result in hazardous radi-ation exposure.

RAV4_Navi_U

Finish

Using your audio system —— Some basics

AUDIO SYSTEM

146

D Turning the system on and off

“AUDIO”: Push this button to displaytouch screen buttons foraudio system (au-dio control mode).“PWR·VOL”: Push this knob to turn theaudio system on and off. Turn this knob toadjust the volume. The system turns on inthe last mode used.You can select the function that enablesautomatic return to the previous screenfrom the audio screen. See “(a) Automatictransition” on page 139 for details.

D Switching between functions

Push “AM·SAT”, “FM” or “DISC·AUX”button to turnon thedesiredmode. Theselected mode turns on immediately.Push these buttons if you want to switchfrom one mode to another.If the disc is not inserted, the “CD” screenwill not appear.

RAV4_Navi_U

Finish

AUDIO SYSTEM

147

The function buttons for radioandCDplay-er operation are displayed on the screenwhen the audio control mode is selected.

Touch them lightly and directly on thescreen.The selected button is highlighted.

INFORMATIOND If the system does not respond to

a touch of a touch screen button,move your finger away from thescreen and then touch it again.

D You cannot operate dimmed touchscreen buttons.

D Wipe off fingerprints using a glasscleaning cloth. Do not use chemi-cal cleaners to clean the touchscreen.

RAV4_Navi_U

Finish

AUDIO SYSTEM

148

D Tone and balanceHowgoodanaudio programsounds toyouis largely determined by the mix of thetreble and bass levels. In fact, differentkinds ofmusic and vocal programs usuallysound better with different levels of trebleand bass.A good balance of the left and right stereochannels and of the front and rear soundlevels is also important.Keep in mind that if you are listening to astereo recording or broadcast, changingthe right/left balance will increase the vol-ume of one group of sounds while de-creasing the volume of another.1. Push the “AUDIO” button.

2. Touch “SOUND”.

3. Touch the desired button.“TREB” “+” or “–”: Adjusts high−pitchedtones.“BASS” “+” or “–”: Adjusts low−pitchedtones.“FRONT” or “REAR”:Adjusts sound bal-ance between the front and rear speakers.“L” or “R”: Adjusts sound balance be-tween the left and right speakers.4. Touch “OK”.The tone of each mode (for such as AM,FM1 and CD player) can be adjusted.

RAV4_Navi_U

Finish

AUDIO SYSTEM

149

D Your CD playerWhen you insert a disc, insert it with the la-bel side up. The CD player will play fromtrack 1 through to the end of thedisc. Thenit will play from track 1 again.

NOTICE

Never try to disassemble or oil anypart of the CD player. Do not insertanything other than discs into theslot.

The player is intended for use with 4.7 in.(12 cm) discs only.D AUX portThe sound of portable audio players con-nected to the AUX port can be enjoyed.Push the “DISC·AUX” button to switch toAUXmode. For details, refer to the “Own-er’s Manual”.

D Listening to the radio

Push these buttons to choose either anAM or FM station.“AM”, “FM1” or “FM2” appears on thescreen.If your vehicle is equipped with a satelliteradio broadcast system, when you pushthe “AM·SAT” button, “AM”, “SAT1”,“SAT2”, “SAT3” station appears on the dis-play. For details about satellite radiobroadcast, see “— Radio operation (XMrSatellite Radio broadcast)” on page 151.

RAV4_Navi_U

Finish

— Radio operation

AUDIO SYSTEM

150

Push “ ” or “ ” sides of the“TUNE·SEEK/TRACK” button to stepup or step down the station band.Your radioautomatically changes tostereoreception when a stereo broadcast is re-ceived. “ST” appears on the screen. If thesignal becomes weak, the radio reducesthe amount of channel separation to pre-vent the weak signal from creating noise.If the signal becomes extremely weak, theradio switches from stereo to mono recep-tion. In this case, “ST”disappears from thescreen.

D Presetting a station

1. Tune in the desired station.2. Touch one of the channel selectorbuttons (1—6) youwant and hold it un-til a beep is heard.This sets the station to the touch screenbutton and the frequency appears on thetouch screen button.Each radio mode can store up to 6 station-s. To change the preset station to a differ-ent one, follow the same procedure.The preset station memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.

RAV4_Navi_U

Finish

AUDIO SYSTEM

151

D Selecting a stationTune in the desired station using one of thefollowing methods.Preset tuning: Touch the channel selec-tor button (1— 6) for the station you want.The touch screen button is highlighted andthe station frequency appears on thescreen.Seek tuning: Push “ ” or “ ” sides ofthe “TUNE·SEEK/TRACK” button andhold it until you hear a beep. The radio willbegin seeking up or down for a station ofthe nearest frequency and will stop on re-ception. Each time you push the button,the stations will be searched automaticallyone after another.To scan all the frequencies: Touch“SCAN” on the screen briefly. “SCAN”ap-pears on the screen. The radiowill find thenext station and stay there for a few se-conds, and then scan again. To select astation, touch “SCAN” again.To scan the preset stations: Touch“SCAN” on the screen for longer thanapproximately a second. “P·SCAN” ap-pears on the screen. The radio will tune inthe next preset station, stay there for a fewseconds, and thenmove to the next presetstation. To select a station, touch “SCAN”again.

To listen to a satellite radio broadcast inyour vehicle, the subscription to the XMrSatellite Radio is necessary.D Howtosubscribe toanXMrSatellite

RadioAnXMrSatellite Radio is a tuner designedexclusively to receivebroadcasts providedunder a separate subscription. Availabilityis limited to the 48 contiguous states and10 Canadian provinces.How to subscribe:You must enter into a separate serviceagreement with the XMr Satellite Radio inorder to receive satellite broadcast pro-gramming in thevehicle. Additional activa-tion and service subscription fees applythat are not included in the purchase priceof the vehicle and optional digital satellitetuner.For detailed information about XMr Satel-lite Radio or to subscribe:U.S.A.—Visit on the web at www.xmradio.com orcall 1−800−967−2346.Canada—Visit on the web at www.xmradio.ca or call1−877−438−9677.TheXMrSatelliteRadio is solely responsi-ble for the quality, availability and contentof the satellite radio services provided,which are subject to the terms and condi-tions of the XMr Satellite Radio customerservice agreement.Customers should have their radio IDready; the radio ID can be found by tuningto “channel 000” on the radio. For details,see “Displaying the radio ID” below.All fees and programming are the respon-sibility of the XMr Satellite Radio and aresubject to change.

RAV4_Navi_U

Finish

— Radio operation(XMr Satellite Radiobroadcast)

AUDIO SYSTEM

152

Satellite tuner technology notice:Toyota’s satellite radio tuners are awardedType Approval Certificates from XMrSatellite Radio Inc. as proof ofcompatibility with the services offered bythe XMr Satellite Radio.D Displaying the radio IDEach XMr tuner is identified with a uniqueradio ID. You will need the radio ID whenactivating XMr service or when reportinga problem.If you select the “CH 000” using the“TUNE·SEEK/TRACK” button, the IDcode of 8 alphanumeric characters ap-pears. If you select another channel, dis-play of the ID code is canceled. The chan-nel (000) alternates the display betweenthe radio ID and the specific radio ID code.

INFORMATIONCargo loadedon the roof luggagecar-rier, especiallymetal objects,mayad-versely affect the reception of XMrSatellite Radio.

D Listening to satellite radio

Push the “AM·SAT” button to chooseeither an AM station or a SAT (satellite)channel.Besides “AM”, “SAT1”, “SAT2” or “SAT3”appears on the display.

Push “ ” or “ ” sides of the“TUNE·SEEK/TRACK” button to selectthe next or previous channel.If you push and hold, you can rapidly scrollforward or down through the channels.

RAV4_Navi_U

Finish

AUDIO SYSTEM

153

D Channel category

Touch either “TYPEA” or “TYPE"” to goto the next or previous category.

D Presetting a channel1. Tune in the desired channel.

2. Touch one of the channel selectorbuttons (1 — 6) and hold it until a beepis heard.This sets the channel to the touch screenbutton and the name and number of thechannel appears on the touch screen but-ton.Each touch screen button can store threeSATchannels. Tochange thepreset chan-nel to a different one, follow the same pro-cedure.The preset channel memory is cancelledwhen the power source is interrupted bybattery disconnection or a blown fuse.

RAV4_Navi_U

Finish

AUDIO SYSTEM

154

D Selecting a channelTune in the desired channel using one ofthe following methods.Preset tuning: Touch the channel selec-tor button (1—6) for the channel youwant.Thebutton (1—6) ishighlighted andchan-nel number appears on the display.To select channel within the currentcategory: Push “ ” or “ ” sides of the“TUNE·SEEK/TRACK” button. The radiowill step up or down the channel within thecurrent channel category. Touch “TYPESEEK”. The radio will step up the channelwithin the current channel category.

To scan the currently selected channelcategory: Touch “TYPE SCAN” briefly.“SCAN” appears on the display. The radiowill find the next channel in the samechan-nel category, stay there for a few seconds,and then scan again. To select a channel,touch “TYPE SCAN” a second time.

RAV4_Navi_U

Finish

AUDIO SYSTEM

155

D Displaying the title and name

When you touch “TEXT”, the song/pro-gram title and the artist name/feature aredisplayed.Up to 16 alphanumeric characters can bedisplayed. (Some information will not befully displayed.)When you touch “TEXT” again, the dis-play returns.

RAV4_Navi_U

Finish

AUDIO SYSTEM

156

D If the satellite radio tuner malfunctionsWhen problems occur with the XMr tuner, a message will appear on the display. Refer-ring to the table below to identify the problem, take the suggested corrective action.

ANTENNA

The XMr antenna is not connected. Check whether the XMr anten-na cable is attached securely.

ANTENNAA short circuit occurs in the antenna or the surrounding antennacable. See a Toyota certified dealer for assistance.

You have not subscribed to the XMrSatellite Radio. The radio is be-ing updated with the latest encryption code. Contact the XMrSatel-lite Radio for subscription information. When a contract is canceled,you can choose the “CH000” and all free−to−air channels.

UPDATING The premium channel you selected is not authorized. Wait for about2 seconds until the radio returns to the previous channel or “CH001”.If it does not change automatically, select another channel. If youwant to listen to the premium channel, contact the XMr Satellite Ra-dio.

NO SIGNAL The XMr signal is too weak at the current location. Wait until yourvehicle reaches a location with a stronger signal.

LOADING Theunit is acquiring audio or program information. Wait until the unithas received the information.

OFF AIR Thechannel you selected is notbroadcasting anyprogramming. Se-lect another channel.

−−−−− There is no song/program title or artist name/feature associated withthe channel at that time. No action needed.

−−−The channel you selected is no longer available. Wait for about 2seconds until the radio returns to the previous channel or “CH001”.If it does not change automatically, select another channel.

Contact the XMr Listener Care Center at 1−800−967−2346 (U.S.A.) or1−877−438−9677 (Canada).

RAV4_Navi_U

Finish

AUDIO SYSTEM

157

NOTICE

This equipment has been tested andfound to comply with the limits for aclass B digital device, pursuant toPart 15 of the FCC Rules. These lim-its are designed to provide reason-able protection against harmful inter-ference in a residential installation.This equipment generates, uses andcan radiate radio frequency energyand, if not installed and used in ac-cordance with the instructions, maycause harmful interference to radiocommunications. However, there isno guarantee that interference willnot occur in a particular installation.

If this equipment does cause harmfulinterference to radio or television re-ception, which can be determined byturning the equipment off and on, theuser is encouraged to try to correctthe interference byone ormore of thefollowing measures:

— Reorient or relocate the receivingantenna.

— Increase the separation betweenthe equipment and receiver.

— Connect the equipment into anoutlet on a circuit different from thatto which the receiver is connected.

— Consult the dealer or an experi-enced radio/TV technician for help.

Information to user

Alternation or modifications carriedout without appropriate authoriza-tionmay invalidate the user’s right tooperate the equipment.

INFORMATIONThis XMr tuner supports “Audio Ser-vices” (Music and Talk) of only XMrSatellite Radio and “Text Informa-tion”* linked to the respective “AudioServices”.*: Text Information includes, StationName, (Artist) Name, (Song) Title andCategory Name.

RAV4_Navi_U

Finish

AUDIO SYSTEM

158

The CD player can play audio CDs, CDtext, WMA discs and MP3 discs.D Audio CD, CD text 161. . . . . . . . .D MP3/WMA disc 164. . . . . . . . . . .

For appropriate discs for this changer, see“Audio system operating hints” on page170.

(a) Inserting discsVehicles with smart key system —The “ENGINE START STOP” switch mustbe set at ACCESSORY or IGNITION ONmode.Vehicles without smart key system —The engine switch must be set at “ACC” or“ON” position.

1. Push the “ ” button.

RAV4_Navi_U

Finish

— CD player operation

AUDIO SYSTEM

159

2. Insert a disc.

3. Push the “ ” button to close thedisplay.After insertion, the set disc is automaticallyloaded.If the label faces down, the disc cannot beplayed. In this case, “CD Check” appearson the screen.

CAUTIOND Do not place anything on theopened display, as such itemsmaybe thrown about and possibly in-jure people in the vehicle duringsudden braking or in an accident.

D To reduce the chance of injury incase of an accident or sudden stopwhile driving, keep the displayclosed.

D Take care not to jam your handwhile the display ismoving. Other-wise, you could be injured.

NOTICE

Do not obstruct the display while it ismoving. It could damage your audiosystem.

INFORMATIONUnder extremely cold conditions, thedisplaymay react slowly or operationsound may become louder.

RAV4_Navi_U

Finish

AUDIO SYSTEM

160

(b) Ejecting discs

Push the “ ” button.

The display will open and the disc will beejected. A disc can then be inserted.

NOTICE

If a disc cannot be ejected, do not for-cibly take out the disc. Keep pushingthe “ ” button for approximately 5seconds and release it. At this time,the audio disc and the map DVD−ROM will be ejected.

(c) Playing a disc

Push the “DISC·AUX” button if the discare already loaded in the CD player.The “CD” screen will be displayed.

RAV4_Navi_U

Finish

AUDIO SYSTEM

161

(d) Operating an audio CDD Playing an audio CD

Push the “AUDIO” button to displaythis screen.

D Selecting a desired track

“TUNE·SEEK/TRACK” button:Use for adirect access to a desired track.Push “ ” or “ ” sides of the“TUNE·SEEK/TRACK”button and repeatit until the desired track number appearson the screen. As you release the button,theCDplayerwill start playing theselectedtrack from the beginning.“TRACK LIST”: The desired track can beselected from a list. This function is avail-able only when the vehicle is not moving.Touch “TRACK LIST”. The track list isdisplayed.

RAV4_Navi_U

Finish

AUDIO SYSTEM

162

Touch the desired track number. TheCDplayer will start playing the selectedtrack from the beginning.

:By touching this button, the listmovesup by 6 track groups. If this button istouchedwhen the top pageof the list is dis-played, the last page is displayed.

:By touching this button, the listmovesdown by 6 track groups. If this button istouched when the last page of the list isdisplayed, the top page is displayed.Fast forward: Push “ ” sides of the“TUNE·SEEK/TRACK” button and hold itto fast forward the disc. When you releasethe button, theCDplayer will resume play-ing from that position.Reverse: Push “ ” sides of the“TUNE·SEEK/TRACK” button and hold itto reverse the disc. When you release thebutton, the CD player will resume playing.

D Searching for a desired track

While the disc is playing, touch“SCAN” briefly.“SCAN” appears on the screen. The CDplayer will play the next track for 10 sec-onds, then scan again. To select a track,touch “SCAN” once again. If the CDplayer reaches the end of the disc, it willstart playing at track 1.After all the tracks are scanned in onepass, normal play resumes.

RAV4_Navi_U

Finish

AUDIO SYSTEM

163

D Other functions

“RPT”: Use it for automatic repeat of thetrack or disc you are currently listening to.While the track is playing, touch “RPT”briefly.“RPT” appears on the screen. When thetrack is finished, the CD player will auto-matically go back to the beginning of thetrack and play the track again. To cancelit, touch “RPT” once again.

“RAND”:Use it for automatic and randomselection.While the disc is playing, touch“RAND” briefly.“RAND” appears on the screen. The sys-tem selects a track on the disc being lis-tened to in random order. To cancel it,touch “RAND” once again.If a CD−TEXT disc is inserted, the title ofthe disc and track will be displayed. Up to29 letters can be displayed.

RAV4_Navi_U

Finish

AUDIO SYSTEM

164

(e) Operating a MP3/WMA discD Playing a MP3/WMA disc

Push the “AUDIO” button and touch aMP3/WMA disc number to display thisscreen.

D Selecting a desired folder“FOLDERY”: Touch this button to go tothe next folder.“FOLDERB”: Touch this button to go tothe previous folder.“FOLDER LIST”: The desired folder canbe selected in a list. This function is avail-able only when the vehicle is not moving.Touch “FOLDER LIST”. The folder list isdisplayed.

Touch the desired folder number. Thechanger will start playing the first file ofthe selected folder.

:By touching this button, the listmovesup by 6 folder groups. If this button istouchedwhen the top pageof the list is dis-played, the last page is displayed.

:By touching this button, the listmovesdown by 6 folder groups. If this button istouched when the last page of the list isdisplayed, the top page is displayed.“FILE”: The file list is displayed.“DETAIL”: Details of the file currentlyplaying is displayed. This function is avail-able only when the vehicle is not moving.

RAV4_Navi_U

Finish

AUDIO SYSTEM

165

D Selecting a desired file

“TUNE·SEEK/TRACK” button: Use fordirect access to a desired file.Push “ ” or “ ” sides of the“TUNE·SEEK/TRACK”button and repeatit until the desired file number appears onthe display. As you release the button, theCDplayer will start playing the selected filefrom the beginning. When “RAND” or“FLD.RPT” is on, the file number within thefolder you are currently being listened toappears.Fast forward: Push “ ” sides of the“TUNE·SEEK/TRACK” button and hold itto fast forward the disc. When you releasethe button, theCDplayer will resume play-ing from that position.Reverse: Push “ ” sides of the“TUNE·SEEK/TRACK” button and hold itto reverse the disc. When you release thebutton, the CD player will resume playing.

“FILE”:The desired file can be selected ina list. This function is available only whenthe vehicle is not moving.Touch “FILE”. The file list is displayed.

RAV4_Navi_U

Finish

AUDIO SYSTEM

166

Touch the desired file number. The CDplayer will start playing the selected filefrom the beginning.

:By touching this button, the listmovesup by 6 file groups. If this button is touchedwhen the top page of the list is displayed,the last page is displayed.

:By touching this button, the listmovesdown by 6 file groups. If this button istouched when the last page of the list isdisplayed, the top page is displayed.“FOLDER”: The folder list is displayed.“DETAIL”: Details of the file currentlyplaying is displayed. This function is avail-able only when the vehicle is not moving.

D Searching for a desired file

While the disc is playing, touch“SCAN” briefly.“SCAN” appears on the screen. Thechanger will play the next file in the folderfor 10 seconds, then scan again. To selecta file, touch “SCAN” once again. If thechanger reaches the end of the folder, itwill start playing from file 1.After all the files are scanned in one pass,normal play resumes.

RAV4_Navi_U

Finish

AUDIO SYSTEM

167

D Searching for a desired folder

While the disc is playing, touch“SCAN” and hold it until the“FLD.SCAN” appears on the screen.The program at the beginning of each fold-erwill be played for 10 seconds. To contin-ue listening to the program of your choice,touch “SCAN” once again.After all the folders are scanned in onepass, normal play resumes.

D Other functions

“RPT”: Use it for automatic repeat of thefile or folder you are currently listening to.Repeating a file —While the file is playing, touch“RPT”briefly.“RPT” appears on the screen. When thefile is finished, the CDplayer will automati-cally go back to the beginning of the fileand play the file again. To cancel it, touch“RPT” once again.Repeating a folder —While the folder isplaying, touch“RPT”and hold it until the “FLD.RPT” appearson the screen.When the folder is finished, the CD playerwill automatically go back to the beginningof the folder and play the folder again. Tocancel it, touch “RPT” once again.

RAV4_Navi_U

Finish

AUDIO SYSTEM

168

“RAND”:Use it for automatic and randomselection of the folder or thedisc which youare currently listening to.Playing the files inone folder in randomorder —While the disc is playing, touch“RAND” briefly.“RAND” appears on the screen. The sys-tem selects a file in the folder you are cur-rently listening to. To cancel it, touch“RAND” once again.Playing the files in all the folders ononedisc in random order —While the disc is playing, touch“RAND” and hold it until the“FLD.RAND” appears on the screen.The system selects a file in all the folders.To cancel it, touch the button once again.When a file is skipped or the system is in-operative, touch “RAND” to reset.

(f) If the player malfunctionsIf the player or another unit equipped withthe player malfunctions, your audio sys-tem will display following messages.If “No CD” appears on the display: It in-dicates that there is no disc in the CDplay-er.If “CD Check” appears on the display:It indicates that the disc dirty, damaged, orit was inserted upside down. Clean thedisc or insert it correctly. If a disc which isnot playable is inserted, “CD Check” willalso appear on the screen. For appropri-ate discs for this player, see “Audio systemoperating hints” on page 170.If “CD Error” appears on the display:The following causes are possible.D There is a trouble inside the system.

Eject the disc.D The inside of the player unit may be too

hot due to the very high ambient tem-perature. Eject the disc and allow theplayer to cool down.

If “NOMUSIC FILE” appears on the dis-play: It indicates that the disc has no play-able data.If the malfunction is not rectified: Takeyour vehicle to your dealer.If an MP3/WMA disc contains CD−DAfiles, only CD−DA files are played. If anMP3/WMA disc contains files other thanCD−DA, only MP3/WMA files are played.

RAV4_Navi_U

Finish

AUDIO SYSTEM

169

Someparts of the audio system can be ad-justed with the switches on the steeringwheel.Details of the specific switches, controls,and features are described below.1 Volume control switch2 “ ” “ ” switches3 “MODE” switch

1 Volume control switchPush “+” side to increase the volume. Thevolume continues to increase while theswitch is being pressed.Push “−” side to decrease the volume.The volume continues to decrease whilethe switch is being pressed.2 “ ” “ ” switchesRadioTo select a preset station:Quickly push and release the “ ” or “ ”switch. Do this again to select thenext pre-set station.To seek a station:Push and hold the “ ” or “ ” switch untilyou hear a beep. Do this again to find thenext station. If you push either the “ ” or“ ” switch in seek mode, the seek modewill cancel.CD playerUse this button to skip up or down to a dif-ferent track or file in either direction.To select a desired track or file:Quickly push and release the “ ” or “ ”switch until the track or file youwant to playis set. If youwant to return to thebeginningof the current track or file, push the “ ”switch once, quickly.3 “MODE” switchEach time you push the “MODE” switch,the system changes the audio mode.To turn the audio system on, push the“MODE” switch.To turn the audio systemoff, push andholdthe “MODE” switch until you hear a beep.

RAV4_Navi_U

Finish

Audio remote controls —— Steering switches

AUDIO SYSTEM

170

NOTICE

To ensure correct audio system op-erations:

D Be careful not to spill beveragesover the audio system.

D Do not put anything other than ap-propriate discs into the CD player.

D The use of a cellular phone insideor near the vehicle may cause anoise from the speakers of theaudio system which you arelistening to. However, this doesnot indicate a malfunction.

Radio receptionUsually, the problem with radio receptiondoes notmean there is aproblemwith yourradio − it is just the normal result of condi-tions outside the vehicle.For example, nearby buildings and terraincan interfere with FM reception. Powerlines or telephone wires can interfere withAM signals. And of course, radio signalshave a limited range, and the farther youare fromastation, theweaker its signal willbe. In addition, reception conditionschange constantly as your vehicle moves.Here are some common reception prob-lems that probably do not indicate a prob-lem with your radio:

FMFading and drifting stations—General-ly, the effective range of FM is about 25miles (40 km). Once outside this range,you may notice fading and drifting, whichincrease with the distance from the radiotransmitter. They are often accompaniedby distortion.Multi−path — FM signals are reflective,making it possible for two signals to reachyour antenna at the same time. If this hap-pens, the signals will cancel each otherout, causing a momentary flutter or loss ofreception.Static and fluttering — These occurwhen signals are blocked by buildings,trees, or other large objects. Increasingthe bass level may reduce static and flut-tering.Station swapping— If the FM signal youare listening to is interrupted orweakened,and there is another strong station nearbyon the FMband, your radiomay tune in thesecond station until the original signal canbe picked up again.AMFading—AMbroadcasts are reflected bythe upper atmosphere — especially atnight. These reflected signals can inter-fere with those received directly from theradio station, causing the radio station tosound alternately strong and weak.Station interference—When a reflectedsignal and a signal received directly froma radio station are very nearly the samefrequency, they can interfere with eachother, making it difficult to hear the broad-cast.Static—AM is easily affected by externalsources of electrical noise, such as hightension power lines, lightening, or electri-cal motors. This results in static.

RAV4_Navi_U

Finish

Audio system operatinghints

AUDIO SYSTEM

171

MP3/WMA filesD MP3 (MPEGAudio Layer 3) and WMA

(Windows Media Audio) are audiocompression standards.

D The MP3/WMA player can play MP3and WMA files on CD−ROM, CD−Rand CD−RW discs.The unit can play disc recordings com-patible with ISO 9660 level 1 and level2 and with the Romeo and Joliet filesystem.

D Whennaming anMP3orWMA file, addthe appropriate file extension (.mp3 or.wma).

D The MP3/WMA player plays back fileswith .mp3 or .wma file extensions asMP3 or WMA files. To prevent noiseand playback errors, use the appropri-ate file extensions.

D The player can play only the first ses-sion using multi−session compatibleCDs.

D MP3 files are compatible with the ID3Tag Ver. 1.0, Ver. 1.1, Ver. 2.2, and Ver.2.3 formats. The unit cannot displaydisc title, track title and artist name inother formats.

D WMA files can contain aWMA tag thatis used in the same way as an ID3 tag.WMA tags carry information such astrack title, artist name.

D The emphasis function is availableonly when playing MP3/WMA files re-corded at 32, 44.1 and 48 kHz. (Thesystem can play MP3 files with sam-pling frequencies of 16, 22.05, and 24kHz. However, the emphasis functionis not available for files recorded atthese frequencies.)

D The sound quality of MP3/WMA filesgenerally improves with higher bit rate-s. In order to achieve a reasonable lev-el of sound quality, discs recorded witha bit rate of at least 128 kbps are rec-ommended.Playable bit ratesMP3 files:MPEG1 LAYER3—64 to 320 kbpsMPEG2LSF LAYER3—64 to 160 kbpsWMA files:Ver. 7, 8 CBR—48 to 192 kbpsVer. 9 CBR—48 to 320 kbps

D The MP3/WMA player does not playback MP3/WMA files from discs re-corder using packet write data transfer(UDF format). Discs should be re-cordedusing “pre−mastering”softwarerather than packet−write software.

D The m3u playlists are not compatiblewith the audio player.

D MP3i (MP3 interactive) and MP3PROformats are not compatible with the au-dio player.

D The MP3 player is compatible withVBR (Variable Bit Rate).

D When playing back files recorded asVBR (Variable Bit Rate) files, the playtime will not be correctly displayed iffast−forward or reverse operations areused.

D It is not possible to check folders thatdo not include MP3/WMA files.

D MP3/WMA files in folders up to 8 levelsdeep can be played. However, thestart of playback maybe delayed whenusing discs containing numerous lev-els of folders. For this reason, we rec-ommend creating discs with no morethan two levels of folders.

D It is possible to play up to 192 folders or255 files on one disc.

RAV4_Navi_U

Finish

AUDIO SYSTEM

172

001.mp3002.wma

Folder 1003.mp3Folder 2004.wma005.mp3

Folder 3006.mp3

D The play order of the compact disc withthe structure shown on the left is as fol-lows:

CD−R AND CD−RW DISCSD CD−R/CD−RW discs that have not

been subject to the “finalizing process”(a process that allows discs to beplayed on a conventional CD player)cannot be played.

D It may not be possible to play CD−R/CD−RW discs recorded on a musicCD recorder or a personal computerbecause of disc characteristics,scratches or dirt on the disc, or dirt,condensation, etc. on the lens of theunit.

D It may not be possible to play discs re-corded on a personal computer de-pending on theapplication settingsandthe environment. Record with the cor-rect format. (For details, contact theappropriate application manufacturersof the applications.)

D CD−R/CD−RWdiscsmaybedamagedby direct exposure to sunlight, hightemperatures or other storage condi-tions. The unit may be unable to playsome damaged discs.

D If you insert a CD−RW disc into theMP3/WMA player, playback will beginmore slowly than with a conventionalCD or CD−R disc.

D Recordings on CD−R/CD−RW cannotbe played using the DDCD (DoubleDensity CD) system.

RAV4_Navi_U

Finish

AUDIO SYSTEM

173

CARING FOR YOUR CD PLAYER ANDDISCSD Your CD player is intended for use with

4.7 in. (12 cm) discs only.D Extremely high temperature can keep

your CD player from working. On hotdays, use air conditioning to cool thevehicle interior before you listen to adisc.

D Bumpy roads or other vibrations maymake your CD player skip.

D If moisture gets into your CD player,you may not hear any sound eventhough your CD player appears to beworking. Remove the discs from theCD player and wait until it dries.

CAUTIONCD player uses an invisible laserbeam which could cause hazardousradiation exposure if directedoutside the unit. Be sure to operatethe player correctly.

CD player

Audio CDs

D Use only compact discs marked asshown above. The following productsmaynot beplayable onyour CDplayer.SACDsdts−CDsCopy−protected CDs

RAV4_Navi_U

Finish

AUDIO SYSTEM

174

" Special shaped discs

" Transparent/translucent discs

" Low quality discs

" Labeled discs

NOTICE

D Do not use special shaped, trans-parent/translucent, low quality orlabeled discs such as those shownin the illustrations. Theuseofsuchdiscs may damage the player orchanger, or it may be impossible toeject the disc.

D Thissystem isnotdesigned foruseof Dual Disc. Do not use Dual Discbecause it may cause damage tothe player.

D If a disc cannot be ejected, do notforcibly take out the disc. Keeppushing the “ ” button forapproximately 5 seconds and re-lease it. At this time, the audio discand the map DVD−ROM will beejected.

RAV4_Navi_U

Finish

AUDIO SYSTEM

175

" Correct " Wrong

D Handle discs carefully, especiallywhen you are inserting them. Holdthem on the edge and do not bend the-m. Avoid getting fingerprints on them,particularly on the shiny side.

D Dirt, scratches, warping, pin holes, orother disc damage could cause theplayer to skip or to repeat a section ofa track. (Toseeapin hole, hold thediscup to the light.)

D Remove discs from the players whenyou are not using them. Store them intheir plastic cases away frommoisture,heat, and direct sunlight.

To clean a compact disc: Wipe it with asoft, lint−free cloth that has been damp-ened with water. Wipe in a straight linefrom the center to the edge of the disc (notin circles). Dry it with another soft, lint−freecloth. Do not use a conventional recordcleaner or anti−static device.

RAV4_Navi_U

Finish

AUDIO SYSTEM

176

TERMSPacket write—This is a general term that describes theprocess of writing data on−demand toCD−R, etc., in the same way that data iswritten to floppy or hard discs.ID3 Tag—This is a method of embedding track−re-lated information in an MP3 file. This em-bedded information can include the tracktitle, the artist’s name, the album title, themusic genre, the year of production, com-ments and other data. The contents canbe freely editedusing softwarewith ID3 tagediting functions. Although the tags are re-stricted to thenumber of characters, the in-formation can be viewed when the track isplayed back.WMA Tag—WMA files can contain a WMA tag that isused in the sameway as an ID3 tag. WMAtags carry information such as track title,artist name.ISO 9660 format—This is the international standard for theformatting of CD−ROM folders and files.For the ISO9660 format, there are two lev-els of regulations.Level 1:The file name is in 8.3 format (8 characterfile names, with a 3 character file exten-sion. File names must be composed ofone−byte capital letters andnumbers. The“_” symbol may also be included.)Level 2:The file namecanhave up to31characters(including the separation mark “.” and fileextension). Each folder must contain few-er than 8 hierarchies.m3u—Playlists created using “WINAMP” soft-ware have a playlist file extension (.m3u).

MP3—MP3isanaudio compression standard de-termined by a working group (MPEG) ofthe ISO (International Standard Organiza-tion). MP3 compresses audio data toabout 1/10 the size of that on conventionaldiscs.WMA—WMA (Windows Media Audio) is an audiocompression format developed by Micro-soft. It compresses files into a size smallerthan that of MP3 files. The decoding for-mats for WMA files are Ver. 7, 8, and 9.

RAV4_Navi_U

Finish

SECTION 7

APPENDIX

177

APPENDIXD Limitations of the navigation system 178. . . . . . . . . . . . . . . . . . . . . .

D Map database information and updates 180. . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

Finish

APPENDIX

178

This navigation system calculates thecurrent vehicle position using satellitesignals, various vehicle signals, mapdata, etc. However, the accurate posi-tion may not be shown depending onthe satellite condition, road configura-tion, vehicle condition or other circum-stances.The Global Positioning System (GPS) de-veloped and operated by the U.S. Depart-ment ofDefense provides an accurate cur-rent vehicle position, normally using 4 ormore satellites, and in some case 3 satel-lites. The GPS system has a certain levelof inaccuracy. While the navigation sys-tem will compensate for this most of thetime, occasional positioning errors of up to300 feet (100m) can and should be expec-ted. Generally, position errors will be cor-rected within a few seconds.

When your vehicle is receiving signalsfrom the satellites, the “GPS” mark ap-pears at the top left of the screen.The GPS signal may be physically ob-structed, leading to inaccurate vehicleposition on the map display. Tunnels, tallbuildings, trucks, or even the placement ofobjects on the instrument panel may ob-struct the GPS signals.The GPS satellites may not send signalsdue to repairs or improvements beingmade to them.Even when the navigation system is re-ceiving clear GPS signals, the vehicleposition may not be shown accurately orinappropriate route guidance may occur insome cases.

NOTICE

The installation of window tintingmay obstruct the GPS signals. Mostwindow tinting contains somemetal-lic content thatwill interferewithGPSsignal reception of the antenna in theinstrument panel. We advise againstthe use of window tinting on vehiclesequipped with navigation systems.

RAV4_Navi_U

Finish

Limitations of thenavigation system

APPENDIX

179

(a) Accurate current vehicle positionmay not be shown in the followingcases:D When driving on a small angled Y−

shaped road.D When driving on a winding road.D When driving on a slippery road such

as in sand, gravel, snow, etc.D When driving on a long straight road.D When motorway and surface streets

run in parallel.D After moving by ferry or vehicle carrier.D When a long route is searched during

high speed driving.D When driving without setting the cur-

rent position calibration correctly.D After repeating achangeof direction by

going forward andbackward, or turningon a turntable in the parking lot.

D When leaving a covered parking lot orparking garage.

D When a roof carrier is installed.D When driving with tire chains installed.D When the tires are worn.D After replacing a tire or tires.D When using tires that are smaller or

larger than the factory specifications.D When the tire pressure in any of the

four tires is not correct.

INFORMATIONIf your vehicle cannot receive GPSsignals, you can correct the currentposition manually. For informationon setting the current position cal-ibration, see page 118.

(b) Inappropriate route guidance mayoccur in the following cases:D When turning at an intersection off the

designated route guidance.D If you setmore thanonedestination but

skip any of them, auto reroute will dis-play a route returning to thedestinationon the previous route.

D When turning at an intersection forwhich there is no route guidance.

D When passing through an intersectionfor which there is no route guidance.

D During auto reroute, the route guid-ance may not be available for the nextturn to the right or left.

D It may take a long time to operate autoreroute during high speed driving. Inauto reroute, a detour route may beshown.

D After auto reroute, the routemaynot bechanged.

D An unnecessary U−turnmay be shownor announced.

D A location may have multiple namesand the system will announce one ormore.

D Some routes may not be searched.D If the route to your destination includes

gravel, unpaved roads or alleys, theroute guidance may not be shown.

D Your destination point might be shownon the opposite side of the street.

D When a portion of the route has regula-tions prohibiting the entry of the vehiclethat vary by time or season or otherreasons.

D The road and map data stored in yournavigation system may not be com-plete or may not be the latest version.

RAV4_Navi_U

Finish

APPENDIX

180

After replacing a tire, implement theop-eration described in the “TIRECHANGE CALIBRATION”. (See page120.)This navigation system uses tire turningdata and is designed to work with factory−specified tires for your vehicle. Installingtires that are larger or smaller than theorig-inally equipped diameter may cause inac-curate display of the vehicle’s position.The tire pressure also affects the diameterof the tires so please make sure the tirepressure of all four tires is correct.

This system uses the maps of DENSO.

� 2011 DENSO CORPORATION� 2010 NAVTEQ. All rights reserved.� 2010 Tele Atlas North America, Inc.All rights reserved. This material isproprietary and thesubject ofcopyrightprotection and other intellectualproperty rights owned by or licensed toTele Atlas North America, Inc. The useof this material is subject to the termsof a license agreement. You will beheld liable for any unauthorizedcopying or disclosure of this material.Data by infoUSACopyright� 2010, AllRights Reserved.� 2010 VISA CorporationCopyright � CoStar RealtyInformation, Inc.The Bullseye Design is a registeredtrademark of Target Brands, Inc.The building footprints and relatedcartographic information in thisproduct comes with MAPMASTERdigital materials.

RAV4_Navi_U

Finish

Map database informationand updates —

APPENDIX

181

END USER LICENSE AGREEMENTPLEASE READ THIS AGREEMENTCAREFULLY BEFORE USING THE

NAVIGATION SYSTEMTHIS IS A LICENSE AGREEMENTFOR YOUR COPY OF THE SPATIALMAP DATABASE, INCLUDINGLOCATION CODES AND RELATEDPRODUCTS (COLLECTIVELY, THE“DATABASE”), USED IN THENAVIGATION SYSTEM. BY USINGTHE NAVIGATION SYSTEM ANDTHE DATABASE, YOU ACCEPT ANDAGREE TO BE BOUND BY ALLTERMS AND CONDITIONS SETFORTH BELOW.LICENSE GRANTDENSO CORPORATION (“DENSO”),as a licensed distributor of theDATABASE, grants to you anon−exclusive, non−perpetual licenseto use your copy of the DATABASE foryour personal use or for your use inyour business’ internal operations andnot for any other purpose. This licensedoes not include the right to grantsub−licenses.OWNERSHIPThe DATABASE and the copyrightsand intellectual property andneighboring rights therein are ownedby Tele Atlas North America, Inc.(“TANA”) and its licensors. ThisAgreement does not transfer any titleor interest in the DATABASE, exceptfor the license to use the DATABASEaccording and subject to the termsandconditions of this Agreement. Youshallnot alter, obscure or remove anycopyright notices, trademarknoticesorother restrictive legends relating to theDATABASE.

The DATABASE comprisesconfidential and proprietaryinformation and materials of TANA.Accordingly, you shall hold theDATABASE in confidence and trust.You shall take reasonable steps toprotect the DATABASE frommisappropriation or misuse. You shallnot extract stand−alone data from orpublish any part of the DATABASEwithout the prior written consent ofTANA and its licensors.LIMITATIONS ON USEThe DATABASE is restricted for use inthe specific system for which it wascreated. Except to the extent explicitlypermitted bymandatory laws, youmaynot extract or reutilize any portion ofthe contents of the DATABASE, norreproduce, copy, duplicate, modify,adapt, translate, disassemble,decompile, or reverse engineer anyportion of the DATABASE.TRANSFERYou may not transfer the DATABASEto third parties, except together withthe system for which it was created,provided that you do not retain anycopy of the DATABASE, and providedthat the transferee agrees to all termsand conditions of this AGREEMENT.

RAV4_Navi_U

Finish

APPENDIX

182

DISCLAIMER OF WARRANTYTHE DATABASE IS PROVIDED ONAN “AS IS” AND “WITH ALL FAULTSBASIS” AND DENSO AND TANA(AND THEIR LICENSORS ANDSUPPLIERS) EXPRESSLYDISCLAIM ALL OTHERWARRANTIES, EXPRESS ORIMPLIED, INCLUDING BUT NOTLIMITED TO, THE IMPLIEDWARRANTIES OFNON−INFRINGEMENT,MERCHANTABILITY,SATISFACTORY QUALITY,ACCURACY, TITLE AND FITNESSFOR A PARTICULAR PURPOSE. NOORAL OR WRITTEN ADVICE ORINFORMATION PROVIDED BYDENSO OR TANA (OR ANY OFTHEIR LICENSORS, AGENTS,EMPLOYEES OR THIRD PARTYPROVIDERS) SHALL CREATE AWARRANTY, AND YOU ARE NOTENTITLED TO RELY ON ANY SUCHADVICE OR INFORMATION. THISDISCLAIMER OF WARRANTIES ISAN ESSENTIAL CONDITION OFTHIS AGREEMENT.LIMITATION OF LIABILITYIN NO EVENT SHALL DENSO ORTANA (OR THEIR LICENSORS ORSUPPLIERS) BE LIABLE FOR ANYINCIDENTAL, CONSEQUENTIAL,SPECIAL, INDIRECT OREXEMPLARY DAMAGES ARISINGOUT OF THIS AGREEMENT ORYOUR USE OF THE DATABASE,INCLUDING, WITHOUT LIMITATION,LOST PROFITS OR COSTS OFCOVER, LOSS OF USE ORBUSINESS INTERRUPTIONOR THELIKE, REGARDLESS OF WHETHERTHE PARTY WAS ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES.

IN NO EVENT WILL THE TOTALLIABILITY OF DENSO OR TANA (ORTHEIR LICENSORS ORSUPPLIERS) EXCEED THEAMOUNTS PAID BY YOU FOR THEDATABASE.WARNINGSThe DATABASE comprises facts andinformation from government andother sources reflectingcircumstances in existence before youreceived the DATABASE, which maycontain errors and omissions.Accordingly, the DATABASE maycontain inaccurate or incompleteinformation due to the passage of time,changing circumstances, and due tothe nature of the sources used. TheDATABASE does not include or reflectinformation relating to, among otherthings, neighborhood safety; lawenforcement; emergency assistance;construction work; road or laneclosures; vehicle or speed restrictions;road slope or grade; bridge height,weight or other limits; road or trafficconditions; special events; trafficcongestion; or travel time.

RAV4_Navi_U

Finish

APPENDIX

183

U.S. GOVERNMENT RIGHTSIf you are an agency, department, orother entity of the United StatesGovernment, or funded in whole or inpart by the United States Government,then use, duplication, reproduction,release, modification, disclosure ortransfer of this commercial product andaccompanying documentation, isrestricted in accordance with theLIMITED or RESTRICTED rights asdescribed in DFARS252.227−7014(a)(1) (JUN 1995)(DOD commercial computer softwaredefinition), DFARS 227.7202−1 (DODpolicy on commercial computersoftware), FAR52.227−19 (JUN1987)(commercial computer softwareclause for civilian agencies), DFARS252.227−7015 (NOV 1995) (DODtechnical data − commercial itemsclause); FAR 52.227−14 Alternates I,II, and III (JUN 1987) (civilian agencytechnical data and noncommercialcomputer software clause); and/orFAR 12.211 and FAR 12.212(commercial item acquisitions), asapplicable. In case of conflict betweenany of the FAR and DFARS provisionslisted herein and this Agreement, theconstruction that provides greaterlimitations on the Government’s rightsshall control. Contractor/manufactureris Tele Atlas North America, Inc., 11Lafayette Street, Lebanon, NH03766−1445. Phone: 603.643. 0330.The DATABASE is �1984−2010 byTele Atlas North America, Inc. ALLRIGHTS RESERVED. For purpose ofany public disclosure provision underany federal, state or local law, it isagreed that the DATABASE is a tradesecret and a proprietary commercialproduct and not subject to disclosure.

If you are an agency, department, orother entity of any State government,the United States Government or anyother public entity or funded inwhole orin part by the United StatesGovernment, then you hereby agree toprotect the DATABASE from publicdisclosure and to consider theDATABASE exempt from any statute,law, regulation, or code, including anySunshine Act, Public Records Act,Freedom of Information Act, orequivalent, which permits publicaccess and/or reproduction or use ofthe Licensed Products. In the eventthat such exemption is challengedunder any such laws, this Agreementshall be considered breached and anyand all right to retain any copies or touse of the DATABASE shall beterminated and consideredimmediately null and void. Any copiesof the DATABASE held by you shallimmediately be destroyed. If any courtofcompetent jurisdiction considers thisclause void and unenforceable, inwhole or in part, for any reason, thisAgreement shall be consideredterminated and null and void, in itsentirety, and any and all copies of theDATABASE shall immediately bedestroyed.

RAV4_Navi_U

Finish

APPENDIX

184

END USER NOTICE

PLEASE READ THIS NOTICECAREFULLY BEFORE USING THISNAVIGATION SYSTEM

The Point Of Interest Data (“POI”Data) in the navigation system is inpart provided by Infogroup Inc.(“Infogroup”). By using the POIData, you accept and agree to allterms and conditions set forthbelow.

1. Ownership

All rights, title and interest to theInfogroup POI Data shall be retainedby Infogroup.2. Limitations on use

Except to the extent explicitlypermitted bymandatory laws, youmaynot extract or reutilize any portion ofthe contents of the POI Data, norreproduce, copy, modify, adapt,translate, disassemble, decompile, orreverse engineer any portion of thePOI Data.3. Transfer

You may not transfer the POI Data tothird parties, except together with thesystem for which it was created,provided that you do not retain anycopy of the POI Data.4. Disclaimer of warranty

EXCEPT AS STATED HEREIN,INFOGROUP MAKES NO EXPRESSOR IMPLIED WARRANTIES,INCLUDING, WITHOUT LIMITATION,ANY EXPRESS OR IMPLIEDWARRANTY OF FITNESS FOR APARTICULAR PURPOSE ORWARRANTY OFMERCHANTABILITY.

5. Limitation of Liability

EITHER INFOGROUPORSUPPLIEROFPOIDATASHALLNOTBELIABLEFOR ANY INDIRECT,CONSEQUENTIAL OR INCIDENTALDAMAGES MADE OR ALLEGED INCONNECTION WITH YOUR USE OFTHE POI DATA.END USER LICENSE AGREEMENTPersonal Use Only. You agree to usethis information for solely personal,non−commercial purposes, and not forservice bureau, time−sharing or othersimilar purposes. You may not modifythe information or remove anycopyright notices that appear on theinformation in any way. You may notdecompile, disassemble or reverseengineer any portion of thisinformation, and may not transfer ordistribute it in any form, for anypurpose. Without limiting theforegoing, you may not use thisinformation with any products,systems, or applications installed orotherwise connected to or incommunication with vehicles, capableof vehicle navigation, positioning,dispatch, real time route guidance,fleet management or similarapplications.

RAV4_Navi_U

Finish

APPENDIX

185

No Warranty. This information isprovided to you “as is,” and you agreeto use it at your own risk. DENSO andits licensors (and their licensors andsuppliers, collectively “DENSO”)makeno guarantees, representations orwarranties of any kind, express orimplied, arising by law or otherwise,including but not limited to, andDENSO expressly disclaims anywarranties regarding content, quality,accuracy, completeness,effectiveness, reliability, fitness for aparticular purpose, non−infringement,usefulness, use or results to beobtained from this information, or thatthe information or server will beuninterrupted or error−free. Somestates, territories and countries do notallow certain warranty exclusions, soto that extent, theabove exclusionmaynot apply to you.Disclaimer of Liability: DENSOSHALLNOT BE LIABLE TO YOU FOR ANYCLAIM, DEMAND OR ACTION,IRRESPECTIVE OF ITS NATURE,ALLEGING ANY LOSS, INJURY ORDAMAGES, WHETHER DIRECT,INDIRECT, INCIDENTAL, SPECIALOR CONSEQUENTIAL DAMAGES,INCLUDING ANY LOSS OF PROFIT,REVENUE OR CONTRACTSARISING OUT OF YOURPOSSESSION, USE OF ORINABILITY TO USE THISINFORMATION, ANY DEFECT INTHE INFORMATION, OR THEBREACH OF THESE TERMS ORCONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORTORBASED ONAWARRANTY, EVENIF DENSO OR ITS LICENSORSHAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES.Some states, territories and countriesdo not allow certain liability exclusionsor damages limitations, so to thatextent the above may not apply to you.

Indemnity. You agree to indemnify,defend and hold DENSO and itslicensors (including their respectivelicensors, suppliers, assignees,subsidiaries, affiliated companies, andthe respective officers, directors,employees, shareholders, agents andrepresentatives of each of them) freeand harmless from and against anyliability, loss, injury (including injuriesresulting in death), demand, action,cost, expense, or claim of any kind orcharacter, including but not limited toattorney’s fees, arising out of or inconnection with any use or possessionby you of this information.END USER NOTICEThe marks of companies displayed bythis product to indicate businesslocations are the marks of theirrespective owners. The use of suchmarks in this product does not implyany sponsorship, approval, orendorsement by such companies ofthis product.

RAV4_Navi_U

Finish

APPENDIX

186

END−USER TERMSThe data (“Data”) is provided for yourpersonal, internal use only and not forresale. It is protected by copyright, andis subject to the following terms andconditions which are agreed to by you,on the one hand, and DENSOCORPORATION (“DENSO”) and itslicensors (including their licensors andsuppliers) on the other hand.� 2010 NAVTEQ. All rights reserved.NAVTEQ holds a non−exclusivelicense from the United States PostalServiceR to publish and sell ZIP+4Rinformation.�UnitedStatesPostal ServiceR2010.Prices are not established, controlledor approved by the United StatesPostal ServiceR. The followingtrademarks and registrations areowned by the USPS: United StatesPostal Service, USPS, and ZIP+4.

TERMS AND CONDITIONSPersonal Use Only. You agree to usethis Data together with vehiclenavigation system for the solelypersonal, non−commercial purposesfor which you were licensed, and notfor service bureau, time−sharing orother similar purposes. Accordingly,but subject to the restrictions set forthin the following paragraphs, you maycopy this Data only as necessary foryour personal use to (i) view it, and (ii)save it, provided that you do notremove any copyright notices thatappear and do not modify the Data inany way. You agree not to otherwisereproduce, copy, modify, decompile,disassemble or reverse engineer anyportion of this Data, and may nottransfer or distribute it in any form, forany purpose, except to the extentpermitted by mandatory laws.Multi−disc sets may only betransferred or sold as a complete setas provided by DENSO and not as asubset thereof.

RAV4_Navi_U

Finish

APPENDIX

187

Restrictions. Except where you havebeen specifically licensed to do so byDENSO, and without limiting thepreceding paragraph, you may not (a)use this Data with any products,systems, or applications installed orotherwise connected to or incommunication with vehicles, capableof vehicle navigation, positioning,dispatch, real time route guidance,fleet management or similarapplications; or (b) with or incommunication with any positioningdevices or any mobile orwireless−connected electronic orcomputer devices, including withoutlimitation cellular phones, palmtop andhandheld computers, pagers, andpersonal digital assistants or PDAs.Warning. The Data may containinaccurate or incomplete informationdue to the passage of time, changingcircumstances, sources used and thenature of collecting comprehensivegeographic data, any of which maylead to incorrect results.No Warranty. This Data is provided toyou “as is,” and you agree to use it atyour own risk. DENSO and itslicensors (and their licensors andsuppliers) make no guarantees,representations or warranties of anykind, express or implied, arising by lawor otherwise, including but not limitedto, content, quality, accuracy,completeness, effectiveness,reliability, fitness for a particularpurpose, usefulness, use or results tobe obtained from this Data, or that theData or server will be uninterrupted orerror−free.

Disclaimer of Warranty: DENSO ANDITS LICENSORS (INCLUDINGTHEIRLICENSORS AND SUPPLIERS)DISCLAIM ANY WARRANTIES,EXPRESS OR IMPLIED, OFQUALITY, PERFORMANCE,MERCHANTABILITY, FITNESS FORA PARTICULAR PURPOSE ORNON−INFRINGEMENT. SomeStates,Territories and Countries do not allowcertain warranty exclusions, so to thatextent the above exclusion may notapply to you.Disclaimer of Liability: DENSO ANDITS LICENSORS (INCLUDINGTHEIRLICENSORS AND SUPPLIERS)SHALL NOT BE LIABLE TO YOU: INRESPECTOF ANY CLAIM, DEMANDOR ACTION, IRRESPECTIVE OFTHE NATURE OF THE CAUSE OFTHE CLAIM, DEMAND OR ACTIONALLEGING ANY LOSS, INJURY ORDAMAGES, DIRECT OR INDIRECT,WHICH MAY RESULT FROM THEUSE OR POSSESSION OF THEINFORMATION; OR FOR ANY LOSSOF PROFIT, REVENUE,CONTRACTSORSAVINGS, ORANYOTHER DIRECT, INDIRECT,INCIDENTAL, SPECIAL ORCONSEQUENTIAL DAMAGESARISINGOUTOF YOURUSEOFORINABILITY TO USE THISINFORMATION, ANY DEFECT INTHE INFORMATION, OR THEBREACH OF THESE TERMS ORCONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORTORBASED ONAWARRANTY, EVENIF DENSO OR ITS LICENSORSHAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES.SomeStates, Territories andCountriesdo not allow certain liability exclusionsor damages limitations, so to thatextent the above may not apply to you.

RAV4_Navi_U

Finish

APPENDIX

188

Export Control. You agree not to exportfrom anywhere any part of the Dataprovided to you or any direct productthereof except in compliance with, andwith all licenses and approvalsrequiredunder,applicable export laws,rules and regulations.Entire Agreement. These terms andconditions constitute the entireagreement between DENSO (and itslicensors, including their licensors andsuppliers) and you pertaining to thesubject matter hereof, and supersedesin their entirety any and all written ororal agreements previously existingbetween us with respect to suchsubject matter.Governing Law. The above terms andconditions shall be governed by thelaws of the State of Illinois, withoutgiving effect to (i) its conflict of lawsprovisions, or (ii) the United NationsConvention for Contracts for theInternational Sale of Goods, which isexplicitly excluded. You agree tosubmit to the jurisdiction of the State ofIllinois for any and all disputes, claimsand actions arising from or inconnection with the Data provided toyou hereunder.Government End Users. If the Data isbeing acquired by or on behalf of theUnited States government or any otherentity seeking or applying rights similarto those customarily claimed by theUnited States government, this Data isa “commercial item” as that term isdefined at 48 C.F.R. (“FAR”) 2.101, islicensed in accordance with theseEnd−User Terms, and each copy ofData delivered or otherwise furnishedshall be marked and embedded asappropriate with the following “Noticeof Use,” and shall be treated inaccordance with such Notice:

NOTICE OF USECONTRACTOR (MANUFACTURER/

SUPPLIER) NAME: NAVTEQCONTRACTOR (MANUFACTURER/

SUPPLIER) ADDRESS:425 West Randolph Street,Chicago, Illinois 60606

This Data is a commercial item asdefined in FAR 2.101 and is subjectto these End−User Terms underwhich this data was provided.

� 2010 NAVTEQ − All rights reserved.

If the Contracting Officer, federalgovernment agency, or any federalofficial refuses to use the legendprovided herein, the ContractingOfficer, federal government agency, orany federal official must notifyNAVTEQ prior to seeking additional oralternative rights in the Data.

RAV4_Navi_U

Finish

APPENDIX

189

There are two types of areas availablefor route guidance. In one type of area,primarily around metropolitan centers,detailed route guidance is available forthe entire area. In theother typeofarea,all roads are displayed on the map butroute guidance is limited. The naviga-tion routemight lackprecisionbecausethe data (no right turns, one−way traf-fic, etc.) is not complete. It is still pos-sible to reach the destination by follow-ing the arrow direction and distance asshown on the bottom left of the screen.The arrow points in the direction of thedestination. The distance shown is asmeasured inastraight line fromthecur-rent vehicle position to the destinationarea.In order to provide you with as accuratemap information as possible, we are al-ways gathering information such as onroad repairs and carrying out on−site in-vestigations. However, the names ofroads, streets, facilities, and their locationsfrequently change. In some places,construction on roads may be in progress.For that reason, information on someareas in this systemmightbedifferent fromthe actual location.The map database is normally updatedonce a year. Contact your Toyota dealerfor information about the availability andpricing of an update.

1. Push the “MENU” button.

2. Touch “Map DVD”.

3. Touch “ DVD” to eject the mapDVD−ROM.

RAV4_Navi_U

Finish

— Changing the mapDVD−ROM

APPENDIX

190

4. Insert the new map DVD−ROM withthe label side up.

5. Push the “ ” button to close thedisplay.

CAUTIOND Do not place anything on theopened display, as such itemsmaybe thrown about and possibly in-jure people in the vehicle duringsudden braking or in an accident.

D To reduce the chance of injury inthe case of an accident or suddenstopping while driving, keep thedisplay closed.

D Take care not to jam your handwhile the display ismoving. Other-wise, you could be injured.

NOTICE

D Do not obstruct the display while itis moving. It could damage yournavigation system.

D If a disc cannot be ejected, do notforcibly take out the disc. Keeppushing the “ ” button forapproximately 5 seconds and re-lease it. At this time, the audio discand the map DVD−ROM will beejected.

INFORMATIONUnder extremely cold conditions, thedisplaymay react slowly or operationsound may become louder.

RAV4_Navi_U

Finish

APPENDIX

191

D To confirm the database versionand disc coverage area

1. Push the “MENU” button.

2. Touch “Map DVD”.

Make sure the version of the database onthis screen.To display the disc coverage area, touch“Covered Area”. Confirm the coveredarea on the screen.Contact your Toyota dealer to find out ifthere is a more recent update released.

D CertificationFor vehicles sold in Canada.

Operation is subject to the following twoconditions: (1) this device may notcause interference, and (2) this devicemust accept any interference, includinginterference that may cause undesiredoperation of the device. This CategoryII radiocommunication device complieswith Industry Canada StandardRSS−310.L’utilisation decedispositif est autoriséeseulement aux deux conditionssuivantes: (1) il ne doit pas produire debrouillage, et (2) l’utilisateur dudispositifdoit être prêt à accepter tout brouillageradioélectrique reçu, même si cebrouillage est susceptible decompromettre le fonctionnement dudispositif. Ce dispositif deradiocommunication de catégorie IIrespecte la normeCNR−310d’IndustrieCanada.

RAV4_Navi_U

Finish

APPENDIX

192

RAV4_Navi_U

Finish

INDEX

INDEX

193

For navigation system function, please also refer to the “Navigation systemfunction index” on page 18.

RAV4_Navi_U

Finish

INDEX

194

Numbers/Symbols? button 42,90,91. . . . . . . . . . . . . . . . . . . . . .3 Routes selection 67. . . . . . . . . . . . . . . . . .

AAdding a memo 134. . . . . . . . . . . . . . . . . . .Adding destinations 76. . . . . . . . . . . . . . . . .Address button 42. . . . . . . . . . . . . . . . . . . . .Alphabet key 26. . . . . . . . . . . . . . . . . . . . . . .AM·SAT button 144. . . . . . . . . . . . . . . . . . . .Area to avoid 105. . . . . . . . . . . . . . . . . . . . .Arrow screen 34,72. . . . . . . . . . . . . . . . . . . .AUDIO button 144. . . . . . . . . . . . . . . . . . . . .Audio remote controls 169. . . . . . . . . . . . . .Auto avoid traffic 120,123. . . . . . . . . . . . . .Auto voice guidance 91,117. . . . . . . . . . . . .Automatic transition 139. . . . . . . . . . . . . . . .AUX port 149. . . . . . . . . . . . . . . . . . . . . . . . .

BBASS 148. . . . . . . . . . . . . . . . . . . . . . . . . . . .Beep setting 141. . . . . . . . . . . . . . . . . . . . . .Brightness 137. . . . . . . . . . . . . . . . . . . . . . . .Building information 38. . . . . . . . . . . . . . . . .

CCalendar with memo 132. . . . . . . . . . . . . . .Calibration 91. . . . . . . . . . . . . . . . . . . . . . . . .Categories 54. . . . . . . . . . . . . . . . . . . . . . . . .CAUTION screen 23. . . . . . . . . . . . . . . . . . .CD player operation 158. . . . . . . . . . . . . . . .Change “Area Size” 109. . . . . . . . . . . . . . . .Change “Icon” 99. . . . . . . . . . . . . . . . . . . . . .Change “Location” 102,108. . . . . . . . . . . . .Change “Name” 101,107. . . . . . . . . . . . . . .Change “Phone #” 103. . . . . . . . . . . . . . . . .Change “Quick Access” 100. . . . . . . . . . . .Change button 42. . . . . . . . . . . . . . . . . . . . .Change the route 66. . . . . . . . . . . . . . . . . . .Changing the map DVD−ROM 189. . . . . . .City center 55. . . . . . . . . . . . . . . . . . . . . . . . .City name 49,53. . . . . . . . . . . . . . . . . . . . . . .City to search 49,52. . . . . . . . . . . . . . . . . . . .Compass mode 36. . . . . . . . . . . . . . . . . . . .Compass mode screen 34. . . . . . . . . . . . . .Contrast 137. . . . . . . . . . . . . . . . . . . . . . . . . .Coordinates button 42. . . . . . . . . . . . . . . . .

Current position as the search point 56. . .Current position display 30. . . . . . . . . . . . .Current position/tire changecalibration 118. . . . . . . . . . . . . . . . . . . . . . .Cursor position as a destination 31. . . . . .Cursor position as a memory point 31. . . .

DDatabase version 191. . . . . . . . . . . . . . . . . .Dealer setting 130. . . . . . . . . . . . . . . . . . . . .Default 91. . . . . . . . . . . . . . . . . . . . . . . . . . . .Del. Dest. button 42. . . . . . . . . . . . . . . . . . .Delete personal data 140. . . . . . . . . . . . . . .Deleting “Quick Access” 101. . . . . . . . . . . .Deleting area to avoid 109. . . . . . . . . . . . . .Deleting destinations 77. . . . . . . . . . . . . . . .Deleting home 105. . . . . . . . . . . . . . . . . . . .Deleting memory points 103. . . . . . . . . . . .Deleting previous points 60,110. . . . . . . . . .Deleting set destinations 64. . . . . . . . . . . . .DEST button 10,42,43. . . . . . . . . . . . . . . . . .Destination information 34. . . . . . . . . . . . . .Destination screen 42. . . . . . . . . . . . . . . . . .Destination search 43. . . . . . . . . . . . . . . . . .Destination search by “Address” 47. . . . . .Destination search by “Coordinates” 63. . .Destination search by “Emergency” 59. . .Destination search by“Freeway Ent./Exit” 62. . . . . . . . . . . . . . . .Destination search by “Intersection” 61. . .Destination search by “Map” 61. . . . . . . . .Destination search by “Memory” 59. . . . . .Destination search by “Phone #” 58. . . . . .Destination search by “POI” 51. . . . . . . . . .Destination search by “Previous” 60. . . . . .Destination search by home 46. . . . . . . . . .Destination search by quick access 46. . .Detour setting 79. . . . . . . . . . . . . . . . . . . . . .Disc coverage area 191. . . . . . . . . . . . . . . .DISC·AUX button 144. . . . . . . . . . . . . . . . . .DISP/TILT button 10,22,137. . . . . . . . . . . . .Display building shapes 91. . . . . . . . . . . . .Display of building shape 115. . . . . . . . . . .Display operation 22. . . . . . . . . . . . . . . . . . .Display POI icons 82,91,114. . . . . . . . . . . .Displaying the title and name 155. . . . . . . .Distance and time to destination 10,75. . . .Dual map 36. . . . . . . . . . . . . . . . . . . . . . . . . .Dual map screen 34. . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

INDEX

195

EEdit “Dealer” or “Contact” 131. . . . . . . . . . .Edit “Location” 131. . . . . . . . . . . . . . . . . . . .Edit “Phone #” 132. . . . . . . . . . . . . . . . . . . .Editing a memo 135. . . . . . . . . . . . . . . . . . .Editing area to avoid 106. . . . . . . . . . . . . . .Editing memory points 98. . . . . . . . . . . . . . .Eject button 144. . . . . . . . . . . . . . . . . . . . . . .Ejecting disc 160. . . . . . . . . . . . . . . . . . . . . .Emergency button 42. . . . . . . . . . . . . . . . . .Estimated arrival time 75. . . . . . . . . . . . . . .Estimated travel time 75,91,111. . . . . . . . . .

FFILE button 165. . . . . . . . . . . . . . . . . . . . . . .FM button 144. . . . . . . . . . . . . . . . . . . . . . . .FOLDER LIST button 164. . . . . . . . . . . . . .Foot print map 37. . . . . . . . . . . . . . . . . . . . .Foot print map button 10. . . . . . . . . . . . . . .Freeway Ent./Exit button 42. . . . . . . . . . . . .Freeway exit information screen 70. . . . . .Freeway information screen 34. . . . . . . . . .Function help 29. . . . . . . . . . . . . . . . . . . . . .Function menu display screen 144. . . . . . .

GGPS 178. . . . . . . . . . . . . . . . . . . . . . . . . . . . .GPS mark 10. . . . . . . . . . . . . . . . . . . . . . . . .Guidance screen for the freeway 71. . . . . .Guidance screen on the freeway 34. . . . . .Guiding the route 16. . . . . . . . . . . . . . . . . . .

HHeading−up 10. . . . . . . . . . . . . . . . . . . . . . .Heading−up symbol 39. . . . . . . . . . . . . . . . .Help 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Home 12,104. . . . . . . . . . . . . . . . . . . . . . . . . .Home touch−screen button 42. . . . . . . . . .House number 47. . . . . . . . . . . . . . . . . . . . .

IIf the player malfunctions 168. . . . . . . . . . .INFO button 10. . . . . . . . . . . . . . . . . . . . . . .Information about the icon 32. . . . . . . . . . .Information items 129. . . . . . . . . . . . . . . . . .Initial screen 23. . . . . . . . . . . . . . . . . . . . . . .

Inputting letters and numbers 26. . . . . . . . .Inserting disc 158. . . . . . . . . . . . . . . . . . . . .Intersection button 42. . . . . . . . . . . . . . . . . .Intersection guidance screen 34,71. . . . . . .

KKey layout 112. . . . . . . . . . . . . . . . . . . . . . . .Keyboard layout 91. . . . . . . . . . . . . . . . . . . .

LLast 5 cities 50,54. . . . . . . . . . . . . . . . . . . . . .Limitations of the navigationsystem 178. . . . . . . . . . . . . . . . . . . . . . . . . .List 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .List all categories button 54,57. . . . . . . . . . .Listening to satellite radio 152. . . . . . . . . . .Listening to the radio 149. . . . . . . . . . . . . . .Local POI list 83. . . . . . . . . . . . . . . . . . . . . .

MMaintenance information 24,128. . . . . . . . . .Maintenance information setting 128. . . . .Map button 42. . . . . . . . . . . . . . . . . . . . . . . .Map database informationand updates 180. . . . . . . . . . . . . . . . . . . . .Map DVD button 90. . . . . . . . . . . . . . . . . . . .Map scale 37. . . . . . . . . . . . . . . . . . . . . . . . .Map screen operation 30. . . . . . . . . . . . . . .Map view 82. . . . . . . . . . . . . . . . . . . . . . . . . .Map View button 10. . . . . . . . . . . . . . . . . . .MAP/VOICE button 10,30. . . . . . . . . . . . . . .Mark button 10. . . . . . . . . . . . . . . . . . . . . . . .Memo information 25. . . . . . . . . . . . . . . . . .Memo list 135. . . . . . . . . . . . . . . . . . . . . . . . .Memory button 42. . . . . . . . . . . . . . . . . . . . .Memory point information 33. . . . . . . . . . . .Memory point names 102. . . . . . . . . . . . . . .Memory point screen 97. . . . . . . . . . . . . . . .Memos for a specifiedperiod of time 136. . . . . . . . . . . . . . . . . . . .MENU button 10,90,91. . . . . . . . . . . . . . . . .Menu screen 90. . . . . . . . . . . . . . . . . . . . . . .MP3/WMA 164. . . . . . . . . . . . . . . . . . . . . . . .My places 96. . . . . . . . . . . . . . . . . . . . . . . . .My Places button 90. . . . . . . . . . . . . . . . . . .

RAV4_Navi_U

INDEX

196

NNames of areas to be avoided 108. . . . . . .Nearest 5 cities 50,53. . . . . . . . . . . . . . . . . .North−up 10. . . . . . . . . . . . . . . . . . . . . . . . . .North−up symbol 39. . . . . . . . . . . . . . . . . . .Notifying traffic restriction 116. . . . . . . . . . .Numbers and symbols 27. . . . . . . . . . . . . .

OOff function 10,91,114. . . . . . . . . . . . . . . . . .On route button 57. . . . . . . . . . . . . . . . . . . .One−touch scroll 30. . . . . . . . . . . . . . . . . . .Operating a MP3/WMA disc 164. . . . . . . . .Operating an audio CD 161. . . . . . . . . . . . .Orientation of the map 39. . . . . . . . . . . . . . .Overview buttons andguidance screen 10. . . . . . . . . . . . . . . . . . .

PPhone # button 42. . . . . . . . . . . . . . . . . . . . .Playing a disc 160. . . . . . . . . . . . . . . . . . . . .Playing a MP3/WMA disc 164. . . . . . . . . . .Playing an audio CD 161. . . . . . . . . . . . . . .POI as a destination 84. . . . . . . . . . . . . . . .POI button 42. . . . . . . . . . . . . . . . . . . . . . . . .POI category change 114. . . . . . . . . . . . . . .POI information 33. . . . . . . . . . . . . . . . . . . .POIs near the search point 57. . . . . . . . . . .POIs to be displayed 82. . . . . . . . . . . . . . . .Pop−up message 91,117. . . . . . . . . . . . . . . .Portable audio players 149. . . . . . . . . . . . .Position/direction calibration 119. . . . . . . .Preset memory points 14. . . . . . . . . . . . . . .Presetting a satellite radio channel 153. . .Presetting a station 150. . . . . . . . . . . . . . . .Previous button 42. . . . . . . . . . . . . . . . . . . .PWR·VOL knob 144. . . . . . . . . . . . . . . . . . .

QQuick access 14. . . . . . . . . . . . . . . . . . . . . .Quick access touch−screen buttons 42. . .

RRadio operation 149,151. . . . . . . . . . . . . . .RAND button 163,167. . . . . . . . . . . . . . . . .Region to search 44. . . . . . . . . . . . . . . . . . .Registering area to avoid 105. . . . . . . . . . .Registering home 12,104. . . . . . . . . . . . . . . .Registering memory points 97. . . . . . . . . . .

Registering preset memory points 14. . . . .Reordering destinations 76. . . . . . . . . . . . .Resume guidance 93. . . . . . . . . . . . . . . . . .Resume Guidance button 90. . . . . . . . . . . .Route button 10. . . . . . . . . . . . . . . . . . . . . . .Route guidance screen 70. . . . . . . . . . . . . .Route overview 84. . . . . . . . . . . . . . . . . . . .Route preference 66,81. . . . . . . . . . . . . . . . .Route preview 85. . . . . . . . . . . . . . . . . . . . .Route trace 86. . . . . . . . . . . . . . . . . . . . . . . .RPT button 163,167. . . . . . . . . . . . . . . . . . .

SSatellite radio channel category 153. . . . . .Satellite tuner 151. . . . . . . . . . . . . . . . . . . . .Scale indicator 10. . . . . . . . . . . . . . . . . . . . .Screen adjustment 137. . . . . . . . . . . . . . . . .Screen configuration button 10. . . . . . . . . .Screen layout function 114. . . . . . . . . . . . . .Screen off 137. . . . . . . . . . . . . . . . . . . . . . . .Screen scroll operation 30. . . . . . . . . . . . . .Screen setting 138. . . . . . . . . . . . . . . . . . . .Search condition 78. . . . . . . . . . . . . . . . . . .Search point from destinations 57. . . . . . .Search point via the map screen 56. . . . . .Searching for a desired file 166. . . . . . . . . .Searching for a desired folder 167. . . . . . .Searching for a desired track 162. . . . . . . .Select User button 90. . . . . . . . . . . . . . . . . .Selecting a desired file 165. . . . . . . . . . . . .Selecting a desired folder 164. . . . . . . . . . .Selecting a desired track 161. . . . . . . . . . .Selecting a language 141. . . . . . . . . . . . . . .Selecting a satellite radio channel 154. . . .Selecting a station 151. . . . . . . . . . . . . . . . .Selecting the region to search 44. . . . . . . .Setting and deleting destination 76. . . . . . .Setting home as the destination 17. . . . . .Setting route 78. . . . . . . . . . . . . . . . . . . . . . .Setup 110. . . . . . . . . . . . . . . . . . . . . . . . . . . .Setup button 90. . . . . . . . . . . . . . . . . . . . . . .Setup screen 91. . . . . . . . . . . . . . . . . . . . . .Show free flowing traffic 120,124. . . . . . . .Show XMr NavTrafficinformation 120,122. . . . . . . . . . . . . . . . . .Single map 35. . . . . . . . . . . . . . . . . . . . . . . .Single map screen 34. . . . . . . . . . . . . . . . . .Sort 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sound icons 100. . . . . . . . . . . . . . . . . . . . . .Starting route from adjacent road 81. . . . .Starting route guidance 65. . . . . . . . . . . . . .Steering switches 169. . . . . . . . . . . . . . . . . .Street name 47. . . . . . . . . . . . . . . . . . . . . . .Suspend guidance 92. . . . . . . . . . . . . . . . . .Suspend Guidance button 90. . . . . . . . . . .

RAV4_Navi_U

INDEX

197

Suspending and resuming guidance 92. . .Switch color 139. . . . . . . . . . . . . . . . . . . . . .Switching between audio functions 146. . .Switching the screens 34. . . . . . . . . . . . . . .

TTILT button 22. . . . . . . . . . . . . . . . . . . . . . . .Time zone 113. . . . . . . . . . . . . . . . . . . . . . . .Tire change calibration 120. . . . . . . . . . . . .Tone and balance 148. . . . . . . . . . . . . . . . . .Touch screen operation 25. . . . . . . . . . . . . .TRACK LIST button 161. . . . . . . . . . . . . . . .Traffic restrict. notification 91. . . . . . . . . . . .Traffic voice guidance 120,124. . . . . . . . . .TREB 148. . . . . . . . . . . . . . . . . . . . . . . . . . . .TUNE·SEEK/TRACK button 144. . . . . . . . .Turn list screen 34,72. . . . . . . . . . . . . . . . . . .Turning the audio systemon and off 146. . . . . . . . . . . . . . . . . . . . . . .TYPE SCAN button 154. . . . . . . . . . . . . . . .Typical voice guidance prompts 73. . . . . . .

UUnit of measurement 91,111. . . . . . . . . . . . .User selection 94. . . . . . . . . . . . . . . . . . . . . .

VVoice guidance in all modes 91,116. . . . . . .Volume 93. . . . . . . . . . . . . . . . . . . . . . . . . . .Volume button 90. . . . . . . . . . . . . . . . . . . . .

XXMr NavTraffic 120. . . . . . . . . . . . . . . . . . . .XMr NavTraffic button 90. . . . . . . . . . . . . . .XMr NavTraffic icon 122. . . . . . . . . . . . . . .XMr NavTraffic indicator 122. . . . . . . . . . . .XMr NavTraffic information arrow 122. . . .XMr NavTraffic mark 10. . . . . . . . . . . . . . . .XMr NavTraffic text information 125. . . . .XMr Satellite Radio broadcast 151. . . . . . .

ZZoom in button 10. . . . . . . . . . . . . . . . . . . . .Zoom out button 10. . . . . . . . . . . . . . . . . . . .

RAV4_Navi_U