Upload
vothu
View
253
Download
2
Embed Size (px)
Citation preview
RAVTD
3000HP
8LINER
8060TWSR
WHEEL ALIGNMENTSYSTEM
min. power consumption
24 volt motor with low speed rotation =
WirelessWirelessWireless
Truck AlignersTruck AlignersTruck Aligners
MEGAPIXEL HIGH RESOLUTION CAMERAS
TOWER-FREE3D Alignment System
Monitor 22"
EASY DATA
EASY ALIGNMENT
3D ANIMATION 3D INFO
TD3000HP.B
PATENT PENDING
3DT® TARGET (Solid Vision Technology)
Exclusive 3D targets:- no need for run out compensation- extremely light- no electronic components inside- no maintenance required.
EXTREMELY FAST:NO COMPENSATIONREQUIRED
EXTREMELY FAST:NO COMPENSATIONREQUIRED
EASY VEHICLE SELECTION
TOP PRECISIONTARGET READINGTOP PRECISIONTARGET READING
The base of the sensor can be translated outward by 65 mm in case of extra large vehicles.
Keyboard with remote-control function.
2,5 lbs9 lbsCOMPACT AND SAFECOMPACT AND SAFE
Bluetooth transmission between measuring heads and control unit.
TOWER-FREETOWER-FREETOWER-FREE
ALIGNMENTREADING IN ALIGNMENTREADING IN 8”
Quick entering of vehicle by model or V.I.N. number. (VIN reader option)
NO ROLLING COMP. NEEDED
NO ROLLING COMP. NEEDED
NO ROLLING COMP. NEEDED
!!
Top productMade in Italy
Automotive Aligners
LED REPEATER
EASYUNDER VEHICLE READING
EASYUNDER VEHICLE READING
QC2R (Quick Control 2 Reverse) allows to quickly diagnose front axle angles: total toe and camber.After measurement the user will decide whether to carry on with alignment operation and vehicle adjustment.
Quick clamp to the lift.Pivoting support to avoid damage due to obstacles while lowering.
PATENT PENDING
FASTEST SETUP FASTEST SETUP
Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.
3 POINT + FAST CLAMPS
480-760 mm(19”-36”)
8”-24”
LIFT LEVEL COMPENSATION
Can be used on any 4 post or scissors lift. Automatic lift level compensation.
OPTION
MOBILE AND SAFE
Guided adjustments, no need to see the monitor.
Camber/Caster
Toe
LED FRONT/REAR
Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.
STDA35E 8”-24”
• 1 control unit with PC, monitor, key-board, printer
• 2 measuring heads• 4 clamps with target• 1 pair of turn tables• 1 brake pedal depressor• 1 steering wheel lock• Instruction manual on CD
STDA124 (2 x kit)
STANDARD
STDA117 (2 x kit)
Buil t in so f twareBuil t in so f twareBuil t in so f tware
QUICK BATTERY CHANGE
STDA141 - REMOTE CONTROL on SmartPhone / Tablet
BATTERY CHARGING STATION
STDA3D/QC QUICK CONTROL
Bluetooth transmission between front measuring heads and control unit. Equipped with TFT colour monitor.Infra-red transmission between measuring heads.Data Bluetooth transmission allows maximum mobility between different working positions, thanks to the absence of cables and any fix structure.
The paper-exit opening permits using the printer with the drawer closed, thereby providing total protection against damage and dirt.
SAFE PRINT
Drawer to store clamps and accessories.
The wheeled control unit houses computer, printer and monitor, allowing total mobility.
DRAWER
WHEELED CONTROL UNIT
Keyboard with remote-control function.
REMOTE CONTROL
8Sensors8Sensors8Sensors
Power supplied by long-life rechargeable batteries.
Infra-red data transmission particularly good even in difficult lighting conditions.
7 lbs
8-sensor technology with solid state electronic inclinometers wireless bluetooth
Windows based computer/software 19” flat screen
Cable battery-recharging system
Attractive new “limited edition” cabinet
Supports VIN scanning (scanner not included)
Supports new ALIGNER CONNECT
4-point clamps and turntab/es included
Brake pedal depressor and steering wheel lock
Pair of self-centering 4 point clamps, with removable claws.(Optional 3point fast clamps)
STDA33EU 10”-24”
S110A7 - Ø 310 mm (12.2”)(2x2200lbs) Turntables
8-LINER
OPTIONSTANDARD
Pair of 3 point clamps, with tire grabber arms and ABS claws.
STDA96 8”-24”
8”-24” (19”-36”)
3 point + Fast clamps4 point
10”-24”
8 CCD8 CCD8 CCD
STDA141 - REMOTE CONTROL on SmartPhone / Tablet
Top productMade in Italy
CAR ALIGNMENT ACCESSORIES
Pair of self-centering 4 point clamps, with removable claws.
STDA33EU 10”-24”
10”-24”
4 point
STDA408 x 33 mm (1.3”)
STDA33EU(standard)STDA35E-95E(option)Metal claws.
STDA41 - 8 x 55 mm (2.2”) STDA33EU-35E-95E-84E
(option)Long metal claws for vans.
STDA136 - 8 x kit STDA33EU
Run-Out Compensation RequiredSet of steel claws for low profile tyres.
Standard STDA40 compared to STDA136
STDA42 - 6 x 55 mm (2.2”) STDA33EU-35E-95E
(option)Extensions for metal claws for of protruding hubs.
METAL
ABS Plastic
Pair of 3 point clamps, with tire grabber armsand ABS claws.
STDA96 8”-24”
8”-24” (19”-36”)
Pair of self-centering 3 point clamps, with tire grabber arms and ABS claws. Equipped with quick claws approach device.
STDA35E 8”-24”
8”-24”
(19”-36”)
3 point + Fast clamps 3 point + Fast clamps
STDA38 Ø from(19”) to (30”)( STDA33EU)Pair grabbers arms for upgrade
STDA100 Ø from (27”) to (36”)STDA101 Ø from (34”) to (44”)( STDA35E-95E)Set of 4 clamping arms
STDA72 - 6 x extensions from 24” to 28”( STDA35E-95E)Extension kit for a pair of 3 point clamps.
STDA39 - 8 x kit STDA46EU-48E-35E-95E-84E
ABS conic claws for quick lock clamps.
STDA94 - 8 x kit STDA46EU-48E-35E-95E-84E
Low depth ABS claws.
STDA131 - 8 x kit STDA46EU-48E-35E-
95E-84EVolkswagen ABS claws.
STDA124 - Ø 360 mm (14.1”)(2x2200lbs) 3D Turnplates
S110A7 - Ø 310 mm (12.2”)(2x2200lbs) Turnplates
Turntables
STDA3D/QC(2 x kit)Quick control standard
S110A2 - 11” x 13” x 1,5”Pair of sliding plates for rear wheels.
Sliding plates
STDA16 - 43,5 x 20 x 2 mmSTDA17 - 59 x 20 x 2 mm
1100/1500500
50
Calibration
STDA133Calibration kit for VISTAR
STDA14Calibration kit for CCD
Standard
8-LinerStandard
8-LinerStandard
8-Liner
Standard
3D VistarStandard
3D VistarStandard
3D Vistar
TWSRTruck Aligners
New 4 led sensors allow alignment reading up to 18 meter.
4 LED SENSORSAbility to operate the system from any measuring head. Often the operator is far, from the console and this slows down the operating speed.
4 REMOTE CONTROLS
UNIVERSAL USEfloor, pit or lift
Faster and more reliable data transmission
through Bluetooth.
LEDS on the measuring head lets the operator know when adjustment angle is within specification range.
LED REPEATER
Significantly higher income production through superior efficiency
Much faster operating times without any loss of accuracy
Simpler system to learn, less training time involved.
Bluetooth transmission between front heads and cabinet
Infrared transmission between sensor heads
Double inclinometer to allow caster ADJUSTMENT without steering
We recommend the new no run out clamps STDA92 enabling to skip run-out compensation procedure
Suitable for car wheels with VARCOMBORAV
Truck AlignersTruck AlignersTruck Aligners
TD 8060 TWSR6CCD sensors - TFT 19”
Contacts for battery charging
QUICK CHARGE
6CCD6CCD6CCD
Top productMade in Italy
Truck Aligners
- 1 control unit complete with PC, monitor, key-board, printer and battery-charger
- 2 Front measuring heads
- 2 Rear measuring heads
- 1 Brake pedal presser
- 1 Steering clamp
STDA141 - REMOTE CONTROL on SmartPhone
FAST CLAMPSeliminates run-out compensation
Measurement of multiple axles vehicles thanks to an extremely easy-to-follow procedure.
User’s instructions by animated graphics for an immediate operation.
• Data management and display program in WINDOWS environment.
• Data bank with vehicle data sheets already entered and further blank sheets to be filled.
• Customer data bank for recording jobs with search by customer name or vehicle plate number.
• Summary and comparison of diagnosis/repair values on a single screen.
OPTION
MULTIPLE AXLERUN-OUT Fast Run-out of
multiple axel with only 2 positions STANDARD
NEWNEWNEW
STDA92Set of 2 non-runout quick adapters. By referencing the wheel center which is almost perfectly accurate, we can deliver a more accurate measurement without need to raise each axle or to roll the vehicle to perform run-out compensation.This improves accuracy while saving 15-20 minutes per truck.
S110A7 - Ø 310 mm (12.2”) 2x220 lbs
ACCESSORIES FOR CAR ( TD8080TWS - TD8060TWS)
(Truck) + Car
STDA33EU 10”-24”
COMBO*
VARCOMBORAV for RAVTD8060TWSR
Top productMade in Italy
INTERNATIONALRavaglioli S.p.A.40037 Sasso MarconiFraz. Pontecchio M.P.O.B. 1690 - Bologna - Italia Tel. +39 - 051 - 6781511Fax +39 - 051 - [email protected] www.ravaglioli.com
RAV Equipment [email protected]
TRUCK ALIGNMENT ACCESSORIES
Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.
Distributed by
Editi
on 0
03RAV Equipment U.S.A.
up
level
down
>700 mm (27,5”)
12”-28”
STDA30EPair of self-centering 4 point clamps with long removable claws. Moving centre crosspiece to adapt the position of the sensor to the vehicle body.
STDA48EPair of self-centering 4 point clamps, with tire grabber arms and metal removable conic claws.
STANDARD
STDA92Set of 2 non-runout quick adapters.
STDA44LGraduated scale for STDA29L
STDA29L - Ø 370 mm (14,5”)Set of 2 commercial turnplates.Capacity 2x10000 lbs (2x4500 kg)
12”-28”
>780-1220 mm(30”-48”)
> 890-1290 mm (35”-50”)
STDA49N Trailer adapters
Trailer
2560/3020
ADAPTER N° 2 (standard)
ADAPTER N° 1 (standard)
NEWNEWNEWIncludes: 2 additional light duty front heads and recharging cradle.It features double bluetooth calibration and double pairing to work with HD and LD vehicle
*Factory order