Upload
truongkhue
View
232
Download
0
Embed Size (px)
Citation preview
RappoRt annuel 2006-2007 annual RepoRt
Cégep de Saint-Jérôme
École polytechnique de Montréal
École de technologie supérieure
Institut des matériaux industriels
univeristé Concordia
université laval
univeristé McGill
université de Sherbrooke
Laboratoire Polynov
CREPEC Centre de recherche en plasturgie et composites Center for applied Research on polymers and Composites
Rapport d’activités 2006-2007 annual Report
CREPEC Rapport annuel 2006-2007 annual Report
table des matières / contents
3 introduction laboratoire PolYnoV / PolYnoV laboratorY
5 bureau de la direction / board oF directors
MeMBReS Du CRepeC / MeMBeRS oF CRepeC
7 ProFesseurs et cHercHeurs / ProFessors and researcHers
18 ProFesseurs et cHercHeurs inVités / Visiting scHolars
18 Personnel de soutien / administratiVe emPloYees
18 tecHniciens / tecHnicians
19 associés de recHercHe / researcH associates
20 stagiaires Post-doctoraux / Postdoctoral Fellows
ÉtuDIantS InSCRItS / GRaDuate StuDentS
21 étudiants au doctorat / PH.d. students
26 étudiants À la maÎtrise / m.a.sc. students
ÉtuDIantS RÉCeMMent DIplÔMÉS / ReCent GRaDuateS
30 doctorat / PH. d.
31 maÎtrise / m.a.sc.
33 séminaires / séminars
34 tableau des Fonds de Financement Pour 2005-2006 / Funding For 2005-2006
puBlICatIonS
35 articles de reVues aVec comité de lecture dePuis trois ans / in Peer-reViewed Journals in tHe last tHree Years
56 comPtes-rendus de conFérences en 2006-2007 / conFerence PaPers in 2006-2007
67 autres Publications en 2006-2007 / otHer Publications in 2006-2007
2
CREPEC Rapport annuel 2006-2007 annual Report
introduction
au cours de sa troisième année d’existence, le CRepeC a dû soumettre un rapport d’activités détaillé pour son évaluation de mi-parcours. Cette opération a été des plus fastidieuses, mais les résultats se sont avérés positifs et les recommandations du Comité visiteur favorables. le Comité recommande de maintenir au même niveau la subvention Regroupement stratégique pour les prochains trois ans. par ailleurs, le Comité invite le CRepeC à recruter un nouvel agent de coordination pour favoriser l’intégration entre les membres et les échanges avec le milieu industriel. on souligne la durée des études graduées qui est un peu longue et on recommande au CRepeC de faire bénéficier son comité scientifique de la contribution de membres de l’extérieur du Québec et même du Canada.
le deuxième colloque annuel du CRepeC, tenu le 13 décembre 2006 à l’École de technologie Supérieure (ÉtS) a été un franc succès. Ce colloque a réuni plus de 156 membres professeurs et étudiants. Sept présentations abordant les différents aspects du développement de nouveaux matériaux ont été faites par des membres (professeurs-chercheurs). De plus, le CRepeC y a invité le professeur patrick t. Mather du département de Macromolecular Science and engineering du Case Western Reserve university (Cleveland, ohio) à présenter une conférence sur les Shape Memory polymers by Design. Également, le professeur tsu-Wei Chou du Department of Mechanical engineering and Center for Composite Materials de l’university of Delaware nous a entretenus sur electro-Mechanical Behavior of Carbon nanotubes and their Composites. la majorité des étudiants ont également présenté leurs projets de recherche en cours dans le cadre d’un concours de posters. Ces soixante-trois posters ont impressionné les participants par leur qualité. le premier prix a été décerné à MM. paul Meunier et Jean-Sébastien leclerc de l’École polytechnique, le deuxième prix à M. Julien Ferec de polytechnique et le troisième prix ex-æquo à Mme Mélanie Kuhn et à M. antoine Santoni et Dr. Ming-Cheng Guo, également de l’École polytechnique. le prochain colloque annuel du CRepeC aura lieu le 12 décembre 2007 à l’École polytechnique. nous attendons plus de 200 participants dont quelques invités de l’industrie des polymères et des composites.
le CRepeC a organisé de nombreux séminaires de conférenciers invités venant de plusieurs institutions à travers le Monde comme le montre la liste dans le rapport. Ces séminaires sont extrêmement précieux
During its third year of existence, CRepeC had to submit a detailed activity report for its mid-term evaluation. It has been a very demanding operation, but the results have been quite positive and the recommendations of the Visiting Committee most favorable. the Committee recommends keeping the same level of the strategic grant for the next three years. However, the Committee recommends that CRepeC proceeds to find a replacement for the position of Coordinator to favor the integration of its members and to increase exchanges with the industry. It is mentioned that the graduate studies within CRepeC are somewhat too long and it is recommended to enlarge the Scientific Committee of CRepeC by bringing members from outside Quebec and even outside Canada.
the second annual colloquium of CRepeC, held on December 13 2006 at École de technologie Supérieure (ÉtS), was a very successful event. this colloquium gathered more than 156 members (professors and students). Seven oral presentations on various topics related to new materials have been made by professors of CRepeC. Moreover, CRepeC has invited professor patrick t. Mather of the Macromolecular Science and engineering Department of Case Western Reserve university (Cleveland, ohio) to make a keynote address on Shape Memory polymers by Design. also, professor tsu-Wei Chou of the Department of Mechanical engineering and Center for Composite Materials, university of Delaware, has made a keynote presentation on electro-Mechanical Behavior of Carbon nanotubes and their Composites. Most of CRepeC graduate students have also presented their current research results in a poster competition. Some sixty-three posters of high quality have been presented the first prize was attributed to Mr. paul Meunier and Jean-Sébastien leclerc of l’École polytechnique; the seond prize was given to Mr. Julien Ferec of polytechnique and the third prize, ex-æquo, to Ms. Mélanie Kuhn and to Mr. antoine Santoni and Dr. Ming-Cheng Guo, also of polytechnique. the next annual colloquium of CRepeC will be held on December 12 2007 at l’École polytechnique. We are expecting more than 200 delegates including a few guests from the local polymer and composite industry.
CRepeC has organized numerous seminars with invited speakers from various institutions around the World as shown by the list in this report. these seminars are highly appreciated from our graduate students and are most useful for their training. CRepeC has also contributed to the organization
3
CREPEC Rapport annuel 2006-2007 annual Report
pour la formation de nos étudiants chercheurs. le CRepeC a également contribué à l’organisation de la troisième Conférence Internationale sur la Durabilité et les applications des Composites en polymères Renforcé de Fibres (pRF) pour la Construction. Cette conférence, organisée par le professeur Brahim Benmokrane du CRepeC et tenue à Québec les 22-24 mai 2007, a connu un vif succès.
plusieurs membres du CRepeC se sont illustrés au cours de l’année 2006-2007. le professeur pierre Carreau a été nommé Fellow de la Société Royale du Canada. le professeur pierre labossière a été nommé Fellow de la Société Canadienne de génie civil. le professeur Suong Hoa a reçu le prestigieux prix Synergie et Défi Innovation 2006 du CRSnG pour sa collaboration avec Robert Fews, de Bell Helicopter textron Canada ltée, pour leur contribution à rendre l’industrie canadienne des aéronefs plus concurrentielle sur la scène internationale.
Deux nouveaux membres se sont joints au CRepeC durant l’année 2006-2007 : le professeur Martin lévesque du département de génie mécanique de l’École polytechnique et le professeur Milan Maric du Chemical engineering Department of McGill university. nous les invitons à participer à des ateliers de travail et des projets de recherche regroupant des chercheurs ayant des expertises connexes ou complémentaires à la leur.
LABORATOIRE POLYNOVau cours de l’année, une dizaine de clients industriels, aussi bien des pMe que des multinationales, ont profité des installations du laboratoire polynov, le seul laboratoire à échelle industrielle du CRepeC.
Grâce à la flexibilité de cette ligne de co-extrusion en feuille, des projets aussi variés que l’enduction de pMMa sur une feuille de pet, la fabrication de tapis commercial ayant une haute teneur en déchets industriels, le développement de matériaux pour des vêtements médicaux, et l’optimisation des propriétés de matériaux d’emballage ont pu être réalisés.
Des projets de compoundage ont également vu le jour. De plus, deux étudiants ont mené à bien leurs projets. Farhad Sadeghi, un étudiant au doctorat sous la supervision du professeur pierre Carreau, a pu produire à grande échelle et avec un haut niveau de contrôle des échantillons de membranes semi-perméables en polypropylène. pierre le Corroller, un stagiaire finissant, a démarré un projet d’étirage de matériaux d’emballage alimentaire dans le but d’optimiser leurs propriétés mécaniques, optiques et barrières.
of the third International Conference on Durability and Field applications of Fibre Reinforced polymer (FRp) Composites for Construction. this conference, organized by professor Brahim Benmokrane and held in Quebec City on 22-24 May 2007 has been a very successful event.
Members of CRepeC have received a special recognition or awards in 2006-2007. professor pierre Carreau has been named Fellow of the Royal Society of Canada. professor pierre labossière has been appointed Fellow of the Canadian Society for Civil engineering. professor Suong V. Hoa has received the prestigious 2006 Synergy and Innovation award from nSeRC for his collaboration with Robert Fews of Bell Helicopter textron Canada ltd. for their work related to composite technology for the benefits of aircraft engineering.
two new members have joined CRepeC in 2006-2007: assistant professor Martin lévesque of the Mechanical engineering Department of École polytechnique and assistant professor Milan Maric of the Chemical engineering Department of McGill university. We invite them to take part in the various workshops and to collaborate to research projects with other members of complementary expertise.
POLYNOV LABORATORY
During the last year, a dozen industrial customers (small and medium-sized businesses as well as large multinationals) took advantage of the facilities available at polynov, the only industrial scale reserach laboratory in CRepeC.
Because of the flexibility of this co-extrusion line, projects ranging from pMMa extrusion coating on a pet film to the manufacturing of commercial carpet with a high industrial waste content, the development of new materials for medical clothing, and the optimization of packaging material properties have been carried out.
Compounding projects were performed as well. Moreover, two students, one graduate and one undergraduate, completed their projects using polynov’s facilities. Farhad Sadeghi, a ph.D. student under the supervision of professor pierre Carreau, produced samples of breathable polypropylene films on an industrial scale and with a high level of control and precision. pierre le Corroller, a graduating student trainee, started a machine direction orientation project for the optimization of the mechanical, optical and barrier properties of food packaging films.
4
CREPEC Rapport annuel 2006-2007 annual Report 5
bureau de la direction / board oF directors
dIRECTEuR / dIRECTOR Pierre J. CARREAu professeur titulaire
ph.D. université du Wisconsin
Rhéologie et phénomènes de transfert
polytechnique
COdIRECTEuR / CO-dIRECTOR Suong HOA professor
ph.D. university of toronto
Development, analysis, Design, and Characterisation of polymer Composites including polymer nanocomposites
université Concordia
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Brahim BENMOKRANE professeur titulaire
ph.D. université de Sherbrooke
propriétés mécaniques et caractérisation des matériaux composites utilisés dans les structures du génie civil
université de Sherbrooke
Mostapha BOuSMINA professeur
ph.D.université louis pasteur de Strasbourg, France
propriétés des polymères et mise en œuvre. Rhéologie et nanomatériaux
université laval
CREPEC Rapport annuel 2006-2007 annual Report6
bureau de la direction / board oF directors
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Pascal HuBERT professeur adjoint
ph.D. university of British Columbia
procédé de mise en forme des matériaux composites. Développement (caractérisation, modélisation, fabrication) des matériaux composites
université McGill
Vladimir BRAILOVSKI professeur
ph.D. École Bauman de Moscou
Caractérisation et modélisation alliages à Mémoire de Forme (aMF)
etS
Johanne dENAuLT agent de recherche
ph.D., université de Montréal
Développement et caractérisation de micro structures, propriétés mécaniques et procédés de mise en œuvre des matériaux composites et nanocomposites
IMI - CnRC
François TROCHu professeur titulaire
ph.D. polytechnique
Méthodes numériques, fabrication de composites, alliages à mémoire de forme (aMF)
polytechnique
CREPEC Rapport annuel 2006-2007 annual Report 7
MeMBReS Du CRepeC / MeMBeRS oF CRepeC ProFesseurs et cHercHeurs / ProFessors and researcHers
Abdellah AJJI agent de recherche / professeur associé
ph.D. polytechnique
Relations procédés – Structure - propriétés physiques des films et fibres polymères
IMI-CnRC
Brahim BENMOKRANE professeur titulaire
ph.D. université de Sherbrooke
propriétés mécaniques et caractérisation des matériaux composites utilisés dans les structures du génie civil
université de Sherbrooke
François BERTRANd professeur agrégé
ph.D. enSIC/Inpl,France
Modélisation physique et numérique d’écoulements de fluides complexes polyphasiques
polytechnique
Rachid BOuKHILI professeur titulaire
ph.D. université de Compiègne, France
Rupture des matériaux plastiques et composites et ruine des structures
polytechnique
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
CREPEC Rapport annuel 2006-2007 annual Report8
Omar CHAALLAL professeur
ph.D. university of liverpool, uK
utilisation de matériaux composites pour la réhabilitation et renforcement des éléments structuraux
etS
Mingyuan CHEN associate professor
ph.D. university of Manitoba
Flexible manufacturing systems analysis, supply chain management, optimization techniques
université Concordia
Vladimir BRAILOVSKI professeur
ph.D. École Bauman de Moscou
Caractérisation et modélisation alliages à Mémoire de Forme (aMF)
etS
Pierre J. CARREAu professeur titulaire
ph.D. université du Wisconsin
Rhéologie et phénomènes de transfert
polytechnique
Mostapha BOuSMINA professeur
ph.D.université louis pasteur de Strasbourg, France
propriétés des polymères et mise en œuvre. Rhéologie et nanomatériaux
université laval
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
CREPEC Rapport annuel 2006-2007 annual Report 9
Kenneth COLE agent de recherche
ph.D. université McGill
Caractérisation physico-chimique des polymères (spectroscopie infrarouge)
IMI-CnRC
Marie-Laure dANO professeure adjointe
ph.D. Virginiatech , uSa
Caractérisation des matériaux composites, modélisation de structures composites, stabilité dimensionnelle, composites à fibres piézoélectriques
université laval
Éric dAVId professeur
ph.D., polytechnique
Dégradation des matériaux polymériques et la mise au point de techniques électriques de caractérisation de l’état de ces matériaux
etS
Johanne dENAuLT agent de recherche
ph.D. université de Montréal
Développement et caractérisation de micro structures, propriétés mécaniques et procédés de mise en œuvre des matériaux composites et nanocomposites.
IMI - CnRC
Abdessalem dERdOuRI agent de recherche
ph.D., École polytechnique
Mise en forme des polymères; Micromoulage; rhéologie des polymères
IMI – CnRC
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
CREPEC Rapport annuel 2006-2007 annual Report10
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Nabil ESMAIL professor
ph.D. Moscow State university
Rheology of Multiphase Systems, Modelling
université Concordia
Basil d. FAVIS professeur titulaire
ph.D. université McGill
Morphologie, interfaces et mélanges polymères
polytechnique
Charles duBOIS professeur agrégé
ph.D. université laval
polymérisation et compoundage réactif
polytechnique
Steven duFOuR professeur agrégé
ph. D. polytechnique
Modélisation numérique des écoulements à surfaces libres présents dans les procédés industriels
polytechnique
dorel FELdMANDistinguished emeritus professor
ph.D. polytechnique Iasi
polymer Blends, Composites
université Concordia
CREPEC Rapport annuel 2006-2007 annual Report 11
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Miroslav GRMELA Chercheur
ph.D. université de prague
Modélisation et thermodynamique
polytechnique
Marie-Claude HEuZEY professeure agrégée
ph.D. université McGill
Rhéologie et modélisation de fluides viscoélastiques
polytechnique
Suong HOA professor
ph.D. university of toronto
Development, analysis, Design, and Characterisation of polymer Composites including polymer nanocomposites
université Concordia
Rajamohan GANESAN associate professor
ph.D. Indian Institute of Science
Stochastic and non-linear Mechanics of Composite Materials and Structures
université Concordia
Pascal HuBERT professeur adjoint
ph.D. university of British Columbia
procédé de mise en forme des matériaux composites. Développement (caractérisation, modélisation, fabrication) des matériaux composites
université McGill
CREPEC Rapport annuel 2006-2007 annual Report12
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Pierre G. LAFLEuR professeur titulaire
ph.D. université McGill
Conception et modélisation des procédés d’extrusion des polymères
polytechnique
Mojtaba KAHRIZI associate professor
ph.D. université Concordia
MeMS, optical Sensors, nano-Devices and their application
université Concordia
Musa KAMAL emeritus professor
ph.D. Carnegie-Mellon university, uSa
polymer engineering and Characterization
université McGill
Pierre LABOSSIÈRE professeur titulaire
ph.D. université d’alberta
Réparation et renforcement de structures existantes avec des matériaux composites. Critères de rupture, analyse de contraintes, durabilité, applications en génie civil
université de Sherbrooke
Michel HuNEAuLT agent de recherche/ professeur associé
ph.D. polytechnique
Malaxage et mise en forme des polymères
IMI-CnRC
CREPEC Rapport annuel 2006-2007 annual Report 13
Milan MARIC professeur
ph.D., university of Minnesota
Controlled radical polymerization, Block copolymers, polymer blends
université McGill
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Martin LÉVESquE professeur adjoint
ph.D., École nationale Supérieure des arts et Métiers (paris)
Modélisation et la prédiction du comportement des matériaux
polytechnique
Amhed MASLOuI professeur
ph.D., université de Sherrooke
Matériaux composites thermoplastiques et thermodurcissables. Rupture et fatigue.
université de Sherbrooke
Larry LESSARd professeur agrégé
ph.D. Stanford university
analyse des contraintes et ruptures des matériaux composites. Conception, fabrication et test des structures composites
université McGill
Radhouane MASMOudI professeur agrégé
ph.D. université de Sherbrooke
Développement et modélisation du comportement structural de nouveaux produits en matériaux composites
université de Sherbrooke
CREPEC Rapport annuel 2006-2007 annual Report14
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
daniel POIRIER Chargé de projet
B. Ing. etS
Caractérisation, mise en forme, équipements et prototypage
Cégep St-Jérôme
Frej MIGHRI professeur agrégé
ph.D. polytechnique
Mise en œuvre des polymères. Développement de matériaux pour applications dans les piles à combustible.
université laval
Kenneth NEALE professeur titulaire
ph.D. université de Waterloo
Matériaux composites pour les structures du génie civil
université Sherbrooke
Marie-Josée NOLLET professeure
ph.D. université McGill
utilisation de matériaux composites pour la réhabilitation et le renforcement des éléments structuraux.
etS
Mamoun MEdRAJ associate professor
ph.D. université McGill
thermodynamic Calculation, neutrons Scattering, phase Diagrams, Metallic Composites
université Concordia
CREPEC Rapport annuel 2006-2007 annual Report 15
Eduardo RuIZ professeur adjoint
ph.D., polytechnique
Mise en forme des matériaux composites
polytechnique
Ramin SEdAGHATI associate professor
ph.D., university of Victoria
Solid Mechanics Smart Materials and Stuctures Smart laminated composites
université Concordia
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
Bernard SANSCHAGRIN professeur titulaire
ph.D. université pierre et Marie Curie, France
Mise en forme des polymères
polytechnique
Martin PuGH associate professor
ph.D. university of leeds, uK
le traitement, la propriété et la microstructure des matériaux métaux, céramiques et polymères
université Concordia
Yixin SHAO associate professor
ph. D. northwestern university
Fibre-reinforced plastic composites
université McGill
CREPEC Rapport annuel 2006-2007 annual Report16
Nom / name titre / titleFormation / DegreeSpécialisation / expertiseInstitution
François TROCHu professeurtitulaire
ph.D. polytechnique
Méthodes numériques, fabrication de composites, alliages à mémoire de forme (aMF)
polytechnique
daniel THERRIAuLT professeur adjoint
ph.D., university of Illinois
Micro et nano fabrication de matériaux avancés (polymères) et micro-appareils
polytechnique
Minh-Tan TON-THAT agent de recherche / professeur associé
ph.D. leopold Franzens universita
Mise en œuvre des composites et formulation dans les produits
CnRC-IMI
Patrick TERRIAuLT professeur agrégé
ph.D. polytechnique
Caractérisation de matériaux particuliers et conception de nouvelles applications industrielles à mémoire de forme (aMF)
etS
Philippe A. TANGuY professeur titulaire
ph.D. université laval
procédés d’induction et de couchage
polytechnique
CREPEC Rapport annuel 2006-2007 annual Report 17
Sylvain TuRENNE professeur titulaire
ph.D. université laval
Mise en forme et métallurgie de poudres
polytechnique
Paula WOOd-AdAMS assistant professor
ph.D. université McGill
Rheology and Structure Characterization of polymers
université Concordia
Toan Vu-KHANH professeur
ph.D. université de technologie de Compiègne, France
propriétés mécaniques et analyse de fracture des polymères utilisés en santé et sécurité au travail.
etS
CREPEC Rapport annuel 2006-2007 annual Report18
Dr. Gilles auSIaS université de Bretagne Sud, France Rhéologie des suspensions non-diluées: prise en compte des interactions entre particules p.J. Carreau
Dr. emmanuel FeRRIeR university lyon Évaluation du comportement à la flexion de poutres et dalles en béton avec armature en pRF encastrée près de la surface B. Benmokrane
Dr. Serguei pRoKoSHKIn Moscow Institute of Steel and alloys therrmomechanical treatment of Shape Memory alloys V. Brailovski
Dr. Won-Kee HonG Kyung Hee university, Corée Matériaux composites en génie civil K. neale
Dr. Carol SHIelD université du Wisconsin Matériaux composites en génie civil B. Benmokrane
MeMBReS Du CRepeC / MeMBeRS oF CRepeC ProFesseurs et cHercHeurs inVités / Visiting scHolars
evelyne RouSSeau Secrétaire polytechnique
philippe allaRD Mise en forme et caractérisation des matériaux composites Cégep St-Jérôme
Claude auBÉ essais de laboratoire sur les matériaux composites et les structures Sherbrooke
Jacques BeauSoleIl procédés de mise en forme polytechnique
eric CloutIeR polymer processes Support and Characterization IMI-CnRC
Jean-François CoRBeIl essais de caractérisation des matériaux composites Cégep St-Jérôme
alexandre DeHaIeS Mise en forme des matériaux composites Cégep St-Jérôme
Jacques DuFouR Instrumentation of processes and General Support of activity IMI-CnRC
Jean-Guy GaGnon laboratoire des matériaux ÉtS
John leSCelleuR laboratoire de structures lourdes ÉtS
G. lÉVeSQue Soutien aux essais de laboratoire sur les matériaux composites Sherbrooke
tecHniciens / tecHnicians
Personnel de soutien / administratiVe emPloYees
nom / name Sujet / Subject professeur hôte / Host professor
nom / name Fonction / Function Institution
nom / name Sujet / Subject Institution
Christian-Charles MaRtel laboratoire des composites à haute performance polytechnique
Serge plaMonDon laboratoire des matériaux ÉtS
nicolas SIMaRD essais de laboratoire sur les matériaux composites Sherbrooke
pierre-Marc SIMaRD procédés d’extrusion polYnoV polytechnique
Marc St-pIeRRe Mise en forme des matériaux composites Cégep St-Jérôme
Dr. Bo WanG School of Civil engineering Jilin architectural and Civil engineering Institute, China Monitorage de structures en pRF à l’aide de capteurs à fibre optique B. Benmokrane
Diane HÉRouX Secrétaire du directeur polytechnique
andré RollIn agent de développement polytechnique
CREPEC Rapport annuel 2006-2007 annual Report 19
aissa allaouI ph.D., ecole Centrale paris Mixing of Carbon nanotubes in epoxy Concordia
Yannic BaRIl M. Ing., ÉtS Caractérisation en traction ÉtS
Catherine BIllotte M.Sc.a., École polytechnique Responsable du laboratoire de micro-caractérisation polytechnique
Florent CHaMpet B. eng., Institut national polytechnique de Grenoble Modélisation de l’hydrodynamique de réacteurs polytechnique
patrick CIGana M.Sc.a., polytechnique procédés d’extrusion polYnoV polytechnique
patrice CouSIn ph.D. université Sherbrooke Caractérisation des polymères Sherbrooke
Marc DeMeRS M. Sc.a. université Sherbrooke Recherches sur les matériaux composites Sherbrooke
Vincent DeMeRS M. Ing., ÉtS DSC ÉtS
Christophe DeValS ph.D., enSae, toulouse, France Modeling of transport phenomena polytechnique
patricia DoleZ ph.D. université de Sherbrooke Gestion des projets de recherche ÉtS
usama a. eBeaD ph.D., Memorial university, new-Foundland Modélisation numériques du comportement des structures composites Sherbrooke
Charles FISCHeR-RouSSeau B. Ing., (en cours) Caractérisation aMF ÉtS
louis FRaDette ph.D., polytechnique experimental Mixing polytechnique
Yan Gao ph.D. Étirage de fibres optiques polymères polytechnique
Mélina HaMDIne M. Sc.a., génie chimique, polytechnique Rhéologie et caractérisation des polymères polytechnique
Kaan a. Inal ph.D., Sherbrooke numerical Simulation of Metal Forming processes Sherbrooke
Mourad HenICHe ph.D., université de Compiègne Modélisation numérique polytechnique
lumunita IoneSCu-VaSII ph.D., université de Montpelier II Study of the morphology of popypropylene, ethylene co-polymers and their composites with CaCo3 Concordia
pierre laFoRtune M. Ing., etS Modélisation d’un stent en aMF ÉtS
Jonathan lalIBeRte B. eng, McGill university auto 21 / CRIaQ projects McGill
Matthieu lelIÈVRe B. eng., École Centrale de lille Hydrodynamique en génie des procédés polytechnique
Khassan MouRtaZoV B. eng., université Concordia thermoplastic Composites Moulding Concordia
luc paRent B.Ing., polytechnique Directeur du laboratoire polYnoV polytechnique
Dominic plaMonDon M. Ing., etS Caractérisation d’un stent en aMF ÉtS
Steve poulIot Bacc. Chimie université de Sherbrooke Rhéologie et mise en œuvre laval
Mahmoud RaJaBIan ph.D., université laval laboratoire de polymérisation polytechnique
Daniel RoSCa ph.D., université Jean-Monnet Mixing of Carbon nanotubes in epoxies Concordia
Marlaine RouSSeau Bacc. Génie chimique université de Sherbrooke extrusion et caractérisation laval
MeMBReS Du CRepeC / MeMBeRS oF CRepeC associés de recHercHe / researcH associates
nom / name Formation et responsabilité / Degree and responsability Institution
Sofiane SouKane ph.D., Institut national polytechnique de toulouse Simulation numérique des procédés polytechnique
Katayoun SoulatI ph.D., École polytechnique Micro and nanofabrication by Direct-Write polytechnique
pirol tuGGu M.Sc.a., université de Waterloo Recherches sur le formage des métaux Sherbrooke
Dimitri VaSIleVSKI ph.D. odessa State university, odessa, ukraine Élaboration et caractérisation des matériaux thermo- électriques fabriqués par métallurgie des poudres polytechnique
Heng WanG M.Sc.a., université Concordia Characterization of Composites Concordia
Ming XIe ph.D., France Manufacturing of Composites Concordia
Duosheng Xu ph.D., université Concordia Finite element analysis of Composite Structures Concordia
Zhenhua Yuan ph.D., academy of Sciences, Beijing, Chine polyethylene/thermoplastic Starch Blends polytechnique
Qi ZHao ph.D., université Concordia Modelling for nanomechanics Concordia
CREPEC Rapport annuel 2006-2007 annual Report20
Dr. ahmed aBoutaJeDDIne 2002-2006 Microcéramique des composites et des métaux K. neale
Dr. andi-Cristian aDRIaneSCu 2006-2007 Signature des décharges partielles résolues dans la phase e. David
Dr. Mohammad al-WoHouSH 2005 laser Welding of thermoplastics M. Kamal
Dr. Konstantinos apoStolou 2005 Computer Simulation of Micro-Injection Molding M. Kamal, a. Hrymak
Dr. prashant BaDHane 2006 nylon/Rubber Blends prepared by Dynamic Vulcanization B.D. Favis
Dr. abdelhak BouSSelHaM 2006 Réhabilitation à l’aide de matériaux composites o. Chaallal
Dr. F. DeFeRSHa 2006 Manufacturing/Composite Manufacturing process optimization M. Chen
Dr. Yves DeYRaIl 2005 Integrated Manufacturing of novel Fuel Cell electrodes and Membrane electrode assemblies M. Bousmina, F. Mighri
Dr. usama a. eBeaD 2002-2006 numerical Modelling of FRp-Strengthened Concrete K neale
Dr. Sherif el-GaMal 2005 Modélisations expérimentales et numériques du comportement sous charge de ponts routiers en béton armé de pRF B. Benmokrane
Dr. ahmed el-SaYeD 2006 Comportement au cisaillement de membrures en béton armé de pRF B. Benmokrane
Dr. Yan Gao 2005-2006 Multilayer polymer Hollow optic Fibers C. Dubois
Dr. Ming-Chen Guo 2005 Rheology and Surface Quality of polymer Foams p.J. Carreau, M.C. Heuzey
Dr. Karina InaeKYan 2006 alliages ti-ni nanostructures V. Brailovski
lumunita IoneSCu-VaSII 2006 Structure of Highly Filled olifin Copolymer p. Wood-adams
Dr. avinash KHopKaR 2005 Dual Shaft Multiphase Mixing p.a. tanguy
Dr. andrey KoRotItSKIY 2006 Structural evolutions in Severely Deformed ti-ni Shape Memory alloys V. Brailovski
Dr. Jianming lI 2004 Interfacial tension effects in polymer Blends B.D. Favis
Dr. tri nGuYen-QuanG 2006 Multiphase CFD Development p.a. tanguy
Dr. Grégoire pIanet 2006 numerical Modeling of Solid-liquid Coating Flow F. Bertrand
Dr. Mohammad H. SattaRI 2005-2006 Sensitivity analysis and Design optimization in large elasto-plastic problems R. Ganesan, R. Sedaghati
Dr. Chakib SattouF 2005-2006 Implantation du modèle de likhatchev dans ansys p. terriault
Dr. aurélie taGuet 2006 Interfacial phenomena in Blends with thermoplastic Starch B.D. Favis
Dr. D.S. YanG 2006 FRp/Concrete Interfaces K. neale
Moon Do YounG 2006 Modélisations expérimentales et numériques du comportemet à l’adhérence d’armature en pRF au béton B. Benmokrane
MeMBReS Du CRepeC / MeMBeRS oF CRepeC stagiaires Post-doctoraux / Postdoctoral Fellows
nom / name année / Year Sujet / Subject Directeur / Director
CREPEC Rapport annuel 2006-2007 annual Report 21
aBBaSI, Samaneh 01-2006 Micromolding of carbon nanotubes based nanococomposites p. Carreau, S. Derdouri
aBDelBaKY, Hussien 2003 performance des poutres de béton renforcées avec des pRF K. neale
aDBel MaGeeD, ehab 2005 Carbon FRp Stirrups as transverse Reinforcement for Bridge G B. Benmokrane, e. el-Salakawy
aBDul-RaHMan, Bahira 2007 Renforcement de structures en maçonnerie à l’aide de matériaux composites de pRF B. Benmokrane
aBouelKaCeM, Qaiss 2006 Development of piezoelectric Films M. Bousmina, F. Mighri
aIt MeSSaouD, Djebar 1999 Contribution à l’étude de thermoplastiques et de thermoplastiques chargés moulés par co-injection B. Sanschagrin
alJaRRaH, Mohammad 2004 thermodynamic evaluation and experimental Investigation of M M. Medraj
alSHuRaFa, Sami 2006 Durability of Bridge Deck Slabs e. el-Salakawy
aRaFIn, Mohammad 2006 aln/Mg Composites – processing and Characterization M. Medraj
aRRIeta, Carlos 2005 Vieillissement des habits de combat incendie e. David, t. Vu-Khanh
aSHRaFI, Behnam 2004 application of carbon nanotubes in MeMS p. Hubert, S. Vengallatore
BaRello, Romina 2006 Damage in Composite Materials M. lévesque
BaRIl, Yannick 2005 Développement d’un système de fermeture du sternum V. Brailovski
BaRJaSteH, ehsan 2005 enrobage de poudres d’aluminium par polymerisation in-situ C. Dubois, J. Chaouki
BeauSIR, Benoit 2005 Modélisation des procédés de formage K. neale
BelaSFaR, Iheb 2005 Diffusion des solvents dans les matériaux : outil de prédiction t. Vu-Khanh
BenaZZa, tewfik 2004 Mise en conformité sismique du bâtiment existant o. Chaallal
BouFFaRD, Jonathan 2005 Mixing of pharmaceutical excipients in a Grannulation process J. Chaouki, F. Bertrand
BouKHeHIlI, Hychem 2002 thermomechanical Behaviour of Friction Materials R. Boukhili
BRIto, Magdalena 2004 Mixing in a Co-Kneader p.a. tanguy
CaBaRet, François 2004 Dual Shaft Mixer Design p.a. tanguy
CauSSe, philippe 2005 Étude de la degradation par fluage d’un polymère F. trochu
CHu, Jing-Song 2004 Microstructure of Micro-Injection Molded parts M. Kamal, M. Maric, a. Hrymak
Coutu, Daniel 2006 Conception et mise en œuvre d’une structure flexible avec actionneurs intégrés pour une aile aéroélastique V. Brailovski, p. terriault
DeMeRS, Vincent 2005 Mise en forme d’alliages titane-nickel à mémoire de forme V. Braislovski
DeRISIS, Bijan 2005 thermoplastic Helicopter landing Gear S. Hoa, M. Hojjati
DouCet, Jocelyn 2004 Investigation numérique et expérimentale des écoulements particulaires dans les systèmes de mélanges pharmaceutiques J. Chaouki, F. Bertrand
ÉtuDIantS InSCRItS / GRaDuate StuDentS étudiants au doctorat / PH.d. students
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report22
DuBÉ, Martine 2004 Fatigue Resistance of Welded peKK/Carbon Joints p. Hubert
DuBe, olivier 2006 Mixing of non-Spherical pharmaceutical excipients F. Bertrand
eISa, Mohamed 2005 FRp Conitnuous Reinfored Concrete pavements B. Benmokrane, e. el-Salakawy
el-JaaFaRI, Samira 2003 Modélisation de la formabilité des alliages de magnesium K. neale
elSaYeD, Mostafa S.a. 2006 Multidisciplinary Design optimization of the Wing-Box e. Sedaghati
el-SaYeD, Walid 2003 Renforcement de dalles de béton avec des pRF K. neale
eltaHeR, Hesham 2006 Crashworthiness analysis of Magnesium Structures M. Medraj
eSlaMI, Hassan 2005 Rhéologie des suspensions de nanoparticules M. Grmela, M. Bousmina
eSMaelI, Babak 2003 polymérisation de polyolefin sur poudres d’aluminium en lit J. Chaouki, C. Dubois
FanG, Haixia 2004 on line Monitoring of Blends Compatibilization by Spectroscopy a. ajji
FaRHat, Maya 2005 Coaxial Multiphase Mixing p.a. tanguy
FatHY, ashraf 2006 Development of very high thermally resistant materials S. Hoa
FauteuX, Christian 2005 laser Chemical Vapor Deposition of nanoparticles J. pegna, D. thérriault
FeReC, Julien 2004 Interactions in Fiber Filled polymers p.J. Carreau, M.C. Heuzey
GHaSeMI, Hesam 2006 Barrier properties of pet p.J. Carreau, M. Kamal
GHIaSI, Hossein 2005 optimization of Composite Materials l. lessard, D. pasini
GIGuÈRe, Robin 2005 Modélisation de l’hydrodynamique des suspensions solide-liquides dans les réacteurs loop p.a. tanguy
GoDat, ahmed 2003 Modélisation de structures en béton armé renforcées de matériaux composites p. labossière, K. neale
GoRDon, Sébastien 2002 tolérance aux dommages des matériaux composites aéronautiques R. Boukhili
Gu, Jian Feng 2003 Rheological Modeling of Blends M. Grmela, B.D. Favis
GRaFFe, andres 2006 nano-porous Membranes templated by ordered Block Copolymers M. Maric
GueRo, Gbeuli 2004 Vieillissement des composites verre – polypropylène t. Vu-Khanh
Ha, anh tung 1999 Morphology and physical aging of toughened polymers t. Vu-Khanh
HaIXIa, Fang 2004 polymer/polymer Miscibility : Fluorescent Spectroscopy F. Mighri
HaMDY, Mohamed 2006 Modélisation numérique par éléments finis du comportement à la flexion de poteaux en pRF R. Masmoudi
HaRRaBI, lotfi 2004 Rigidity and Friction of Materials used in protective Gloves t. Vu-Khanh
HaSSan, Salek 2005 thermoplastic Composites Manufacturing S. Hoa, J. Denault
HoanG, phuang Hoa 2002 Fatigue d’éléments renforcés en cisaillement en MCa o. Chaallal
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report 23
JaFFaRI, Rouzbeh 2005 Gold Cyanidation p.a. tanguy
KaMel, Hesham 2006 Crashworthiness analysis R. Sedaghati, M. Medraj
KaRBaSSI, amin 2005 Vulnérabilité des bâtiments historiques en maçonnerie M.J. nollet
KaSSeM, S. 2005 Closed-loop Supply Chain Management M. Chen
KHoSRaVI-SICH, peyman 2004 Design optimization of thin-Walled Composite Structures under Dynamic load R. Ganesan
KeRManSHaHI, azadeh 2006 towards Development of Green plasticizers M. Maric, D.G. Cooper, J. nicell
KeSHtKaR, Mahdi 2006 Rheology of Fiber-Filled polymer Systems M.C. Heuzey, p.J. Carreau
KHalKHal, Fatemeh 2006 properties of epoxy Carbon nanotubes p.J. Carreau
KHoun, loleï 2005 Resin transfer Molding optimization for aerospace Structures p. Hubert
KuHn, Mélanie 2005 Microfabrication of Fuel Cells by Direct-Write assembly D. therriault, S. Vengallatore
laBeRGe-leBel, louis 2006 Design of nanocomposites D. therriault, M. el-Khakani
lee, Kam-Wa 2002 phase Separation in pC-lpC Blends in Injection Molding M. Kamal
leFÈBVRe, Karine 2004 Bâtiments avec murs de remplissage en maçonnerie M.J. nollet
lI, Gang 2002 Biodegradable polymer Blends B.D. Favis
lI, Michelle 2004 Model Branched polyolefins M. Maric, J. Dealy
MaanI, amirhossein 2007 Rheology and Morphology of tpo Foams p.J. Carreau, M.C. Heuzey
MaZInanI, Saeedeh 2006 nanocomposites Fibers by electrospinning C. Dubois, a.ajji
MenDeZ, lionel 2004 production of High Impact pS in a Microreactor C. Dubois
MIHaI, Michaela 2005 Foaming of Biodegradable polymer/thermoplastic Starch B.D. Favis, M. Huneault
MIRJalIlI, Vahid 2007 Development of Conductive Carbon nanotube Composites p. Hubert
MIRZaDeH, amin 2007 Reactive elastomer/Clay nanocomposites C. Dubois, p.G. lafleur, M. Kamal
MoBuCHon, Christophe 2004 Model Systems for the Rheological Investigation of polymer/Clay nanocomposites p.J. Carreau, M.C. Heuzey
MoHIuDDIn, Mohamed 2005 Mechanical properties of Stiched Composites S. Hoa
MoKWInSKI, Yvan 2005 Méthodologies adaptatives pour l’étude des écoulements à surfaces libres S. Dufour, F. Guilbault
MotaMeDI, Ramin 2004 nanoindentation of polymer Films p. Wood-adams
naIR, abdelkader 2006 Caractérisation de la réponse diélectrique sous montée en te e. David
naVaee-aRDeH, Shahram 2005 a novel continuous biodrying process for drying of mixed sludge: design, experimentation and modeling p. Stuart, F. Bertrand
nGuYen, Chien thang 2002 puncture Resistance of protective Materials t. Vu-Khanh
noHIle, Cédrick 2005 Vieillissement du butyle t. Vu-Khanh
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report24
ouellette, paul 2000 Monitoring of Shrinkage of thermosets S. Hoa
paRaDIS, alexandre 2006 Dégradation des aMF p. terriault
Quan, Yan Bai 2004 Design optimization for Functionnal Biomaterials S Hoa
RIouX, Michel 2004 experimental and Industrial planning of the RtM process F. trochu
RIVaRD, Roland 2007 Écoulement à surface turbulent S. Dufour
RIVeRa, Christian 2004 advanced CFD in Mixing p.a. tanguy
RoBeRt, Mathieu 2006 amélioration des propriétés physiques, thermiques et mécaniques de renforcements en pRF à l’aide de nano-composites B. Benmokrane
SaeeD, Huda a. 2005 Durabilité des reparations pRF K. neale
SaMaDI, niyusha 2005 Microfluidic of Dna Solutions p. Wood-adams, a. Dolatabadi
SeBBane, Hakim 2002 Modélisation des procédés de formage K. neale
SHaHBIKIan, Shant 2004 predicting phase Inversion in Reactive polymer Blends p.J. Carreau, M.C. Heuzey
SHoKouHI, G. 2004 Durability evaluation of prefabricated Deck Made of FRp B. Benmokrane
SIKDaR, S. 2001 optimal Machining parameters in Milling Hard Materials M. Chen
SolIMan, Shehab 2004 Structural elements Strengthened with nSM FRp Reinforcement B. Benmokrane, e. el-Salakawy
SoltanI, Reza 2005 Système d’isolation des enroulements stratoriques e. David
StoeFFleR, Karen 2004 Élaboration de nanocomposites polyéthylène/montmorillonite p.G. lafleur, J. Denault
taBataBaeI, Hesam 2006 Fabrication of porous Membrane from polymer Blends p.J. Carreau, a. ajji
taRaSI, Fariba 2005 thermal Spray Coating of nano-Structured Ceramics M. Medraj, a. Dolatabadi
toBBI, Hany 2007 Comportement de colonnes en béton confinés de matériaux composites B. Benmokrane
tReMBlaY, Guy 2004 Caractérisation des contraintes biomécaniques provoqués t .Vu-Khanh
uRIBe-CalDeRo, Jorge 2003 thermally Stable Modifiers for nanoclay M. Kamal
VaCHon, pierre-luc 2006 amélioration de la ténacité au délaminage des composites carbone-époxy à l’aide de renforts actifs en alliages à mémoire de forme V. Brailovski, p. terriault
VaSuDeVan, Rajamohan 2006 Vibration Control of Structure using Magneto-Rheologica (MR) Fluids R. Sedaghati, M. Medraj
VIDal, David 2002 Développement d’algorithmes parallèles pour la modélisation numérique d’écoulements de fluides en milieu poreux F. Bertrand, R. Roy
VInCent, achim 2005 Fast numerical analysis of liquid Composites Manufacturing e. Ruiz
VIRGIlIo, nick 2005 Étude des interfaces dans les mélanges de polymères B.D. Favis
XIao, Bao 2001 Sensing of Stresses in Composite Structure using Brouillin Fibers S. Hoa
Xu, Zhenli 2005 Systèmes de précontrainte pour les réhabilitations pRF K. neale
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report 25
YaHIaouI, abdallah 2003 Confinement des colonnes avec des matériaux composites K. neale
YanG, Fan 2004 Design optimization and Vibration Control of Structures using active and passive Mass Dampers R. Sedaghati
YI, X. 2004 Manufacturing process analysis for product Quality Improvement M. Chen
YouSSeF, tarik 2005 Creep & Creep Rupture of FRp Reinforcements of Concrete B. Benmokrane, e. el-Salakawy
YuRYeV, Yury 2004 Reptation Dynamics of polylactide p. Wood-adams
ZaBIHolla, abolghassem 2003 Design optimization and Vibration Control of Smart laminated Composite Structures under Random loading R. Sedaghati, R. Ganesan
ZeBDI, oussama 2005 Conception et fabrication de resorts composites F. trochu, R. Boukhili
ZHanG, Zhijie 2001 aérodynamique dans le procédé de soufflage de gaines p.G. lafleur
ZHenYu, Xiang 2006 layer by layer Deposition phenomena B.D. Favis
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report26
aBBouD, tarek 2006 Souplesse des doigts de gants t. Vu-Khanh
aBDellaouI, Chafik 2006 analysis of Flexible Injection Strategies e. Ruiz
aHMaRI, ali 2003 Compoundage par polymérisation des nanoargiles C. Dubois, p.J. Carreau
anDRe, Cédric 2007 Développement de générateurs thermoélectrique S. turenne
aRIBIa, Karima 2006 tenue en fatigue des poutres soumises à un préchargement o. Chaallal
aRRoYo, oscar 2005 polymer/thermoplastic Starch Blends with nanoclay B.D. Favis, M. Huneault
aRZpeYMa, alborz 2005 Microfluidics of Dna Solutions p. Wood-adams
attaYeBI, Houda 2005 Rôle des contraintes mécaniques sur l’état de dispersion dans les nanocomposites polymères M. Bousmina, F. Mighri
aZIZIan, Reza 2007 Strain or Displacement Formulation in Fe updating Methods M. lévesque
ÉtuDIantS InSCRItS / GRaDuate StuDentS étudiants À la maÎtrise / master students
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
BaCHelleRIe, laure 2007 Développement d’un système de pronostique en fatigue a. Maslouhi
BaKouR, azzedine 2006 Renforcement à l’aide de matériaux composites o. Chaallal
Ben aYaD, Rached 2007 Durabilité des composites soumis à l’absorption d’humidité a. Maslouhi
BeRnIeR, Simon 2007 Réponse diélectrique de l’isolation des câbles extrudés e. David
BInette, philippe 2005 Contrôle des déformations causées par un gradient thermique M.l. Dano
BItton, Éric 2007 transformation durable des façades en maçonnerie M.J. nollet, H. Rivard
BouatIa, Souhail 2005 Développement de plaques bipolaires pour piles à combustible de type peMFC F. Mighri, M. Bousmina
BouSHel, Chakib 2006 Control of automated Injection Machines e. Ruiz
BouSSaHa, Fateh 2005 Comportement en fatigue des poutres renforcées à l’aide de matériaux composites o. Chaallal
BouRQue, Jean-pierre 2005 Gauchissement hygro-mécanique dans le papier/carton M.l. Dano
BoutHIette, Étienne 2007 Détection de l’endommagement dans les structures M.l. Dano
CHaHal, Rajpal 2007 Design of Composite Shafts S. Hoa
CHaRtRanD, Maxime 2006 Fermeture du sternum : mise en oeuvre V. Brailovski
ClIn, thibaut 2007 Simulation thermomécanique du comportement de module peltier S. turenne
CoeSnon, Benjamin 2005 Modélisation de l’écoulement de suspensions dans des mélangeurs planétaires F. Bertrand, p.a. tanguy
CRoteau-laBoulY, Bruno 2005 Characterization and Validation of Resin Infusion F. trochu
CuCuRull, Ian 2005 Système de blindage et distance de garde en tête de tranchées o. Chaallal
CREPEC Rapport annuel 2006-2007 annual Report 27
DaQoune, tarik 2006 analysis of process parameters for a Flexible Manufacturing e. Ruiz
DaVooDI, Sahar 2005 Wood-plastic Composites D. Feldman
DuBReuIl, François 2003 Réhabilitation en cisaillement de structures en Ba à l’aide de matériaux o. Chaallal, M.J. nollet
FaRaH, elias 2006 High Strain Rate a1 Constitutive theory M. lévesque, C. perron
FatHI, Mohamed 2005 effet de l’interface main-gant sur la mesure de la résistance à la piqûre t. Vu-Khanh
FIDaHouSSen, alain 2006 obstacles mobiles et écoulements à surfaces libres compressibles S. Dufour, D. orban
FIRlotte, nicolas 2006 Mechanical property evaluation of Green plasticizers M. Maric, D.G. Cooper, J. nicell
FIRooZRaI, arash 2006 analysis of Hard landing in aircraft R. Sedaghati, a. Stiharu
FouRnIeR, Charles-olivier 2005 pickering emulsions in the oil Industry p.a. tanguy
GeoRGeS, thomas 2006 Conception d’actionneurs en alliage à mémoire de forme à rendement élevé V. Brailovski, p. terriault
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
Jean, Sébastien 2006 porosity Minimization in RtM Manufacturing e. Ruiz
JettÉ, Marc-andré 2007 embedded Damping elements in Composite laminates e. Ruiz
JouBaRne, Éric 2006 Maillages adaptatifs pour les écoulements avec cavitation S. Dufour, F. Guilbault
lanoue, Frédéric 2007 Étude en fatigue des assemblage par frettage a. Vadean, B. Sanschagrin
leCleRC, Jean-Sébastien 2006 analyse et caractérisation de la formation de porosités dans le procédé d’injection sur renfort e. Ruiz
leDouX-CoRBeIl, aurélie 2005 Simulation numérique de la coulée de magnésium S. turenne
lÉVeSQue, Mélanie 2006 Diagnostic des transformateurs de puissance e. David
louRDel, nicolas 2006 Identification of a Viscoelastic Ink M. lévesque, D. thérriault
MenDWI, Rafid 2006 Wettability of ni alloys on Stainless Steels Supstrates M. Medraj
GIGlIottI, François 2003 Développement d’un logiciel de calcul de structures renforcées de FRp o. Chaallal
GoSSelIn, Mathilde 2006 Évaluation de l’adhésion dans les circuits integers a. Maslouhi
GuIllauD, Stéphane 2004 propriétés rhéologiques de polymères associatifs p.J. Carreau, M.C. Heuzey
GRuCIC, alexandar 2007 thermal properties of Composite S. Hoa
HaMMouD, ahmad 2004 transient adaptive Methods for Free Surface Flows S. Dufour
Hao Yuan, Chen 2006 Microfabrication de modules peltier S. turenne
HaSSan, Garbi 2004 Diagnostic des transformateurs de puissance e. David
HIDa, Hassan 2006 Méthode d’évaluation de la vulnérabilité sismique des ponts M.J. nollet, a. Khaled
HouDe, Yanick 2004 Renforcement des fondations en béton o. Chaallal
ISlaM, Md Mezbahul 2005 thermodynamic Modeling of the Mg-Cu-Y System M. Medraj
CREPEC Rapport annuel 2006-2007 annual Report28
MIao, Hongyan 2006 peen-Forming Modelling M. lévesque
MoGHaDDaS, Mahsa 2005 passive Vibration Control of Composite Structures using Vibration absorber R. Sedaghati
MoGHaReH, S. 2006 Composite process Simulation M. Chen
MoStaFID, ali 2005 Characterization of the Homogeneity of Metal Foams M. Medraj
MotaMeDI, Ramak 2006 evaluation of Sub-Surface Defects of Composite laminates using Shearography S. Hoa, n. Sinakumar
MouGeot, aurélie 2007 Design of nanomaterials for electromagnetic Shielding D. thérriault
naSeRY, Hesam 2006 Mg/SiC Composites M. Medraj, M. pugh
nGuYen, luc 2006 Développement de plaques bipolaires F. Mighri
noFaR, Reza 2006 Composites with Conductive Matrix S. Hoa, M. pugh
o’FlYnn, Julian 2005 Manufacturing optimization using the RtM process l. lessard
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
oRteGa, Isabelle 2006 nanocomposites Based on epoxy Matrices e. Ruiz
palaRDY, Geneviève 2005 analysis of automotive parts Manufactured by the RtM process p. Hubert
paRent, Isabelle 2006 Moulage par injection de poudres de superalliages S. turenne
paYRoW, puria 2006 Synthetic Fibers Reinforced Concrete D. Feldman, M. nokken
pelletIeR, Hugo 2007 effet du confinement par matériaux composites de cylindres de béton p. labossière
peRReault, Martin 2007 Blending of Cohesive excipients F. Bertrand
pRoVenCHeR, Hélène 2006 Caractérisation du complexe papier-huile e. David
RaBaBaH, Mahmoud 2005 Investigation in extended Finite element Method R. Sedaghati
RaHMat, Meysam 2005 thermal Modeling and optimization of Micro Heat pipes l. lessard, p. Hubert
RaInVIlle, Michael 2005 Développement d’un simulateur des tolérances statistiques pour une conception robuste p. terriault
RaVatI, Sepher 2005 Multiple percolation in Co-Continuous polymer Blends D.B. Favis
RIVet, Hélène 2006 optimization of Shot-peening parameters M. lévesque, C. perron
RoY, Frédéric 2005 Fabrication de modules thermoélectriques S. turenne, R. Masut
RoY, Marc-andré 2006 Intégration de système éolien au réseau de distribution e. David
SaleHI, pouneh 2005 Controlled Release from Well-Defined porous polymeric Materials B.D. Favis
SaRSanIuC, Bogdan 2004 Modélisation du vieillissement des matériaux composites soumis à différentes conditions climatiques K. neale
SInaeI, Hossein 2006 Composites with High electrical Conductivity S. Hoa
SInGH, amandeep 2004 Stress analysis of Composite with tubular Sections R. Sedaghati
St-GeoRGeS, Éric 2006 Étude de poteaux en béton armé confinés par une enveloppe en matériaux composites p. labossière, J. proulx
CREPEC Rapport annuel 2006-2007 annual Report 29
SteIneR, Stéphan 2007 Étude de l’effet d’échelle sur la contribution du béton à la résistance au cisaillement de membrures en béton armé de pRF B. Benmokrane
SVetlana, Spitsina 2006 Composite packaging for Fiber optic Strain Gages S. Hoa, M. Kahrizi
talBot, Serge 2001 Réhabilitation des murs de refend en béton o. Chaallal
tHÉBeRGe, Jean 2006 Évaluation des lames de crêpage par émission acoustique a. Maslouhi
tHeRIault, France 2003 Mechanical Design of Helicopter Structures l. lessard
tRuDeau, paul 2007 polyurethane Composites for Structural parts e. Ruiz
VaCHon, pierre-luc 2004 Suppression des fissures dans les structures composites V. Brailovski
WanG, W. 2006 Cost analysis and Reduction for Composite Manufacturing M. Chen
YouanCe, Suze 2007 Vulnérabilité sismique des églises du Québec M.J. nollet
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report30
alCHaMI, Ghofran 2002-2007 Fluage des structures renforcées avec des pRF K. neale
BoRSe, nitin 2001-2006 Melt processing and properties of polymer Clay nanocomposites M. Kamal
BouGueRRa, K. 2003-2007 Contribution à l’étude du comporte-ment de dalles de ponts en béton armé de pRF soumises à des charges concentrées B. Benmokrane
CHunG, Young-Mi 2002-2006 Microstructure of Vibration Welded pa-6 Joints M. Kamal
DeFeRSHa, F, 2002-2006 Manufacturing System optimization M. Chen
el-RaGaBY, amr 2003-2007 Fatigue Behaviour of Concrete bridge Deck Slabs reinforced with Glass FRp Bars B. Benmokrane, e. el-Salakawy
GInGRaS, Jean-philippe 2003-2006 procédé d’émulsification de systèmes à haute teneur en phase dispersée p.a. tanguy
HaRRaQ, anas 1997-2006 Strengthening of prestressed Beams with FRps K. neale
Hu, Shilian 2002-2006 Surface Finish for automotive Com-posites S. Hoa, R. Ganesan
InaeKYan, Karina 2003-2006 traitement thermomécanique des alliages ti-ni V. Brailovski
lÉVeSQue, Julie 2004-2007 Modélisation de la formabilité des alliages de magnésium K.neale
lonGtIn, Rémi 2005-2007 Synthesis and Characterization of aligned Carbon nanofibers J. pegna, D. thérriault
DaIYInG, liu 2002-2006 progressive Failure and post-buckling Response of tapered Composite plates R. Ganesan
MÉtICHe, Slimane 2003-2007 Étude expérimentale en théorique du composite à la flexion de poteaux en pRF R. Masmoudi
naDeRI, Ghassem 2002-2007 nanocomposites Based on Dynami-cally Vulcanized pp/epDM p.G. lafleur, C. Dubois
nGo, tri-Dung 2003-2006 Mechanism for Reinforcement in nanocomposites S. Hoa, M.t. ton-that
RoY, René 2003-2007 Development of Durable non-Metal-lic Composite Bridge B. Benmokrane
SaDeGHI, Farhad 2002-2007 Membranes from Stretched pure pp and pe Films and Sheets p. J. Carreau, a. ajji
Yuan, Xu 2004-2006 Composites with nanoclay/epoxy S. Hoa
ZaIDI, ali 2003-2006 thermal effects on Serviceability of FRp Concrete Bridge Slabs B. Benmokrane, R. Masmoudi
ZHanG, W. 2003-2006 JIt production M. Chen
ÉtuDIantS RÉCeMMent DIplÔMÉS / ReCent GRaDuateS doctorat / PH. d.
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report 31
aGRaWal, a. 2005-2006 Quality Control System Design M. Chen
al-KaZZaZ, Haider 2004-2006 laser Welding of Mg alloys M. Medraj
alaM, Mashiul 2005-2007 Feasibility Study of output-only Modal testing for on-orbit application R. Sedaghati, R. Bhat
allaRD, Éric 2005-2006 Quality assessment of Flexible Injection F. trochu, e. Ruiz
aRaFIn, Mohammad 2004-2006 transient liquid phase Bonding of nickel Superalloys and Stainless Stells: Modeling and experimental Investigations M. Medraj
aRuMuGaM, anandha K. 2004-2007 Reliability of notched Composites R. Ganesan
BanaSZaK, Yannick 2005-2007 Étude numérique et expérimentale de la mise en forme de renforts fibreux et application à la préparation de préformes F. trochu
BaRaR pouR, Sanaz 2004-2006 Solid Dispersion in a Dual Shaft Mixer p.a. tanguy
Bonnot, Sylvain 2005-2006 Fluid Mechanics of Coaxial Mixing p.a. tanguy
BouCeKIne, Yacine 2004-2006 Dimensional Stability of Injection Molded parts after the pa B. Sanschagrin, S. Derdouri
BouRGeoIS, Frédéric 2004-2006 Étude statistique de profils de corrosion appliquée à l’inspection non-destructive de conduites métalliques S. turenne, B. Clément
BRuneauX, Julien 2006-2007 Rheology of Ink in Micro-Fluidic Devices M.C. Heuzey, D. thérriault
CHaGnon, Mathieu 2005-2007 Évaluation de la dégradation à l’interface des composites a. Maslouhi
CHIntapallI, Sridhar 2004-2006 preliminary Structural Design optimization of an aircraft Wing-Box R. Sedaghati, a. ahmed
CHoWDHuRY, Mahabubul 2003-2006 Dynamic performance of Heavy Vehicles using Finite element Method R. Sedaghati
DaBBaGuI, abderrazak 2004-2006 Caractérisation de composites renforcés par des particules e. David
De olIVeIRa, Marcius 2005-2007 Wet Web Strength Development M. Maric, t. Van de Ven
DIMItRIeVSKa, Sashka 2005-2007 assessment of the biocompatibility of nanostructured polymeric fibers l. Yahia, a. ajji, M. Bureau
DInCeR, Yakasir 2004-2006 porous Membrane Development by Biaxial Stretching F. Mighri, M. Bousmina
el ouaSSInI, ayoub 2004-2006 une nouvelle approche pour la reconstruction statique des images B.D. Favis, a. Saucier
FatSeYeu, arkadz 2004-2006 Manoindentation of polymers p. Wood-adams
FeuVRIeR, Julien 2005-2007 Étude numérique du remplissage et des transferts thermiques pour la fabrication des pièces composites par injection sur renforts F. trochu
GIRISH, thatte 2005-2006 Self Healing of epoxy for Space applications S. Hoa
GRaFFe, andres 2004-2006 Synthesis and Characterization of Diblock and triblock Copolymers that Can Be used as templates for nanoporous Materials M. Maric
GueRRa, Mario 2003-2006 Contraintes sur les aubes d’une turbine à gaz e. David
HaSSan, Garbi 2004-2006 Diagnostic des transformateurs de puissance e. David
ÉtuDIantS RÉCeMMent DIplÔMÉS / ReCent GRaDuateS maÎtrise / m.a.sc.
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report32
HuanG, Cheng 2004-2006 Rheology of Highly Filled olefin Copolymers p. Wood-adams
IRaSHaHI, arash 2004-2006 Hydrodynamic Characterization of the Maxblend Impeller p.a. tanguy
JeRBI, lobna 2005-2006 Caractérisation de réfractaires par ultrasons S. turenne
laFoRtune, pierre 2004-2006 application des aMF dans l’amortissement sismique des bâtiments p. terriault
l’eCuYeR, Hugo 2004-2006 Modélisation numérique de fluids non newtonien dans une pince de couchage contra-rotative déformable F. Bertrand, p.a. tanguy
leMIeuX, Marc 2004-2006 numerical Modeling of the Mixing of non-Spherical powders F. Bertrand
MaGuIRaGo, Mahamadou 2004-2006 Modélisation des excitatrices à diodes tournantes e. David
naIR, abdelkader 2004-2006 Méthode de la montée en tension progressive e. David
naYYaR, Karun 2003-2006 Modal analysis of Composite plates using Hierarchical FeM R. Ganesan
nIunIn, Grigore 2005-2007 Caractérisation des matériaux de friction R. Boukhili
petReSCue, laura 2002-2007 effect of defects on structural performance of low-cost composite aircraft structures p. Hubert, M. Munro
ReDHa, nacer 2004-2006 Évaluation des propriétés physiques et mécaniques de laminés fabriqués par enroulement filamentaire R. Masmoudi
RHoDe, Melanie 2006-2007 Micro Injection Molding Surface profiling M. Kamal, W. Michaeli
RoBeRt, Mathieu 2005-2006 Durabilité du composite polymérique de polypropylène renforcé de fibres de verre B. Benmokrane
SantonI, antoine 2005-2006 Étude de la generation des défauts de surface sur les mousses de tpo M.C Heuzey, p.J. Carreau
SaRSanIuC, Bogdan 2004-2006 environmental Durability of FRp Repairs K. neale
SInGH, amandeep 2004-2006 Structural optimization and Sensitivity analysis using Finite element Force Method R. Sedaghati
tHoMÉ, Guillaume 2005-2006 Maxblend Design Improvements p.a. tanguy
tRInH tan, Frederick 2004-2006 the Biodegradation of a Synthetic Co-polyester by Hydrolase producing Microorganisms M. Maric, D. G. Cooper, J. nicell
WaDHaM-GaGnon, Matthew 2004 Modeling of hyper-elastic materials p. Hubert, M. padoussis
WaFFo, Fanny 2005-2006 Development of a Kinetic analysis Software polyKenetic e. Ruiz
Yu, Dong Xiao 2005-2007 laser Machining of Cutting tool Materials M. Balazinski, D. thérriault
YuRYeV, Yury 2004-2006 Crystal Structure in thin Films of polylactide p. Wood-adams
ZHanG, Chunfang 2004-2007 Étude de l’effet des paramètres de fabrication sur la distorsion des pièces moulées par injection B. Sanschagrin
nom / name année / Year Sujet / Subject Directeur - codirecteur / Director - Codirector
CREPEC Rapport annuel 2006-2007 annual Report 33
dr. Véronique Michaud École polytechnique Fédérale de lausanne (epFl), Suisse
Étude de la saturation des renforts fibreux utilisé pour la fabrication des composites à haute performance 10-03-06
dr. Joël Bréard université du Havre
Fabrication des composites par injection sur renforts : milieux poreux à double échelle 17-03-06
dr. Sylvain Chatel eaDS - Centre Commun de Recherche, Suresnes, France
Fabrication des composites par injection sur renforts pour des applications aéronautiques 05-04-06
dr. Abdelhak Bousselham École de technologie supérieure
utilisation des matériaux composites à base de fibres en polymère dans les structures du génie civil 20-04-06
dr. Fabien Cara thermoflux technologies S.a., Suisse
applications du contrôle thermofluxmétrique à la mise en œuvre des matériaux 19-05-06
dr. Guy della Valle Institut national de la Recherche agronomique (InRa), France
propriétés thermorhéologiques et mécanismes d’expansion de produits à base de maïs 01-06-06
dr. Yves Surrel ChercheurVisuoltechnologies
applications avancées de contrôle de qualité des surfaces par déflectométrie 03-07-06
Professor daniel de Kee tulane university, new orleans, la
Yield Stress Measurements in Complex Structured Systems 19-09-06
Professor Teodor I. Burghelea university of British Columbia
elastic turbulence in Dilute polymer Solutions 19-10-06
Professor Tsu-Wei Chou university of Delaware
electro-Mechanical Behavior of Carbon nanotube and their Composites 13-12-06
Professor Patrick T. Mather Case Western Reserve university
Shape Memory polymers by Design 13-12-06
Professeur Chul B. Park université de toronto
understanding of Fundamental Mechanisms in polymeric Foaming 15-02-07
dr. Richard Parnas university of Connecticut
accuracy of Radial permeability Measurements 27-02-07
Professeur Ahmad Ramazani Sharif university of technology (tehran)
In-Situ preparation and Characterization of polyethylene/Clay nanocomposites 28-02-07
dr. Gilles Ausias université de Bretagne Sud, France
Rhéologie des suspensions non-diluées: prise en compte des interactions entre particules 29-03-07
liste des séminaires Parrainés Par le crePec seminars
Invité / Guest Sujet / topic Date
CREPEC Rapport annuel 2006-2007 annual Report34
tableau des Fonds de Financement Pour 2006-2007 Funding For 2006-2007
Fonctionnement / Operating
CRSnG DÉCouVeRteS / DISCoVeRY GRantS nSeRC 1 458 669 $
CRSnG StRatÉGIQueS – CollaBoRatIonS – CHaIReS / nSeRC StRateGIC - CollaBoRatIVe – CHaIRS 2 508 660 $
CRSnG eQuIpeMent / nSeRC eQuIpMent 431 279 $
FQRnt 1 046 836 $
Autres subventions / Other fundings
Chaires de recherche du Canada / Canada Research Chairs 700 000 $
Consortium recherche et d’innovation en aérospatiale au Québec – CRIaQ Consortium for Research and Innovation in aerospace in Québec 537 832 $
IRSSt : Institut de recherche en santé et sécurité du travail 153 660 $
Fondation canadienne innovation (FCI) et du gouvernement du Québec / Canadian Foundation for Innovation (FCI) and Quebec Government 2 788 945 $
Réseaux centres d’excellence (RCe) / networks of centres of excellence 563 998 $
Contrats et conventions de recherche / Contracts 2 400 900 $
TOTAL 12 790 779 $
CREPEC Rapport annuel 2006-2007 annual Report 35
Sadeghi, F., ajji, a., Carreau p.J., «Microporous Membranes obtained from polypropylene by Stretching», J. Membranes Sci., 292, 62-71, 2007.
ajji, a., Dumoulin, M.M., « Very High Modulus High-Density polyethylene and High-Modulus polypropylene obtained by Solid-State Roll Drawing », J. appl. polym. Sci., 102, 3391-3399, 2006.
ajji, a., elkoun, S., Zhang, X., «Biaxial orientation Characterization in pe and pp using WaXD X-Ray pole Figures, FtIR Spectroscopy and Birefringence», J. plastic Film & Sheeting, 21, 115-126, 2005.
ajji, a., Zhang, X., elkoun, S., «Biaxial orientation in HDpe Film: Comparison of Infrared Spectroscopy, X-Ray pole Figures and Birefringence techniques», polymer, 46, 3838-3846, 2005.
Chapleau, n., Mohanraj, J., ajji, a., Ward, I.M., «Roll-Drawing and Die-Drawing of toughened poly(ethylene terephthalate); part 1. Structure and Mechanical Characterization», polymer, 46, 1956-1966, 2005.
Fatahi, S., ajji, a., lafleur, p.G., «Correlations Between Structural parameters and properties of pe Blown Films», J. plastic Film & Sheeting, 21, 2005.
Jouan, M.R ., Bureau, M.n., ajji, a., Huneault, M.a., Mantovani, D., «How to Design a Structure able to Mimic the arterial Wall Mechanical Behavior?», J. of Mat. Sci., 40, 9, 2675-2678, 2005.
Mohanraj, J., Chapleau, n., ajji, a., Duckett, R.a., Ward, I.M., «Roll-Drawing and Die-Drawing of toughened poly(ethylene terephthalate); part 2. Fracture Behavior», polymer, 46, 1967-1981, 2005.
Sadeghi, F., ajji, a., Carreau, p.J., «Study of polypropylene Morphology obtained from Blown and Cast Film processes: Initial Morphology Requirements for Making Membrane by Stretching», J. plastic Film & Sheeting, 21, 199-216, 2005.
Zhang, X., ajji, a., «oriented Structure of pp/llDpe Multilayer and Blends Films», polymer, 46, 3885-3846, 2005.
ajji, a., «a technique for absolute Biaxial Birefringence Measurements and its application», J. plastic Film and Sheeting, 20, 31-42, 2004.
a. ajji, auger, J., Huang, J., Kale, l., «Biaxial stretching and structure of Various llDpe resins», polymer engineering and Science, 44, 2, 252-260, 2004.
Zhang, X., ajji, a., Huneault, M.a., «Control of Blown Film tear Strength anisotropy through Blending of lDpe and llDpe», polymer, 45, 1, 217-229, 2004.
Zhang, X.M., elkoun, S., ajji, a., Huneault, M.a., «effect of Crystalline Structure on tear Resistance of lDpe and llDpe Blown Film», J. of plastic Film and Sheeting, 20, 1, 43-54, 2004.
Benmokrane, B., el-Salakawy, e.F., el-Gamal, S., Goulet, S., «Construction and testing of Canada’s First Concrete Bridge Deck totally Reinforced with Glass FRp Bars: Val-alain Bridge on Highway 20 east», aSCe Journal of Bridge engineering, 12, 5, 2007.
Benmokrane, B., el-Salakawy, e.F., el-Ragaby, a., el-Gamal, S., «performance evaluation of Innovative Concrete Bridges Reinforced with FRp Bars», Canadian Journal of Civil engineering, 34, 298-310, 2007.
Benmokrane, B., el-Salakawy, e.F., el-Ragaby, a., el-Gamal, S., «performance evaluation of Innovative Concrete Bridges Reinforced with FRp Bars», Canadian Journal of Civil engineering, 34, 10, 2007.
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Fatigue analysis of Concrete Bridge Deck Slabs Reinforced with e-Glass/Vinyl ester FRp Reinforcing Bars», Composites, part B: engineering, 38, 703-711, 2007.
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Fatigue performance of FRp Reinforced Concrete Bridge Deck Slabs», aSCe Journal of Composites for Construction, 11, 3, 2007.
el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Mechanical and Structural Characterization of new Carbon FRp Stirrups for Concrete Members», aSCe Journal of Composites for Construction, 11, 4, 2007.
Benmokrane, B., el-Salakawy, e.F., el-Ragaby, a., and lackey, t., «Designing and testing of Concrete Bridge Decks Reinforced with Glass FRp Bars», aSCe Journal of Bridge engineering, 11, 217-229, 2006.
puBlICatIonS articles de reVues aVec comité de lecture dePuis trois ans in Peer-reViewed Journals in tHe last tHree Years
CREPEC Rapport annuel 2006-2007 annual Report
el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Shear Strength of FRp-Reinforced Concrete Beams without transverse Reinforcement», aCI Structural J., 103, 2, 235-243, 2006.
el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Shear Capacity of High Strength Concrete Beams Reinforced with FRp Bars», aCI Structural J., 103, 3, 383-389, 2006.
laoubi, K., el-Salakawy, e.F., Benmokrane, B., «Creep and Durability of Sand-Coated Glass FRp Bars in Concrete elements under Freeze/thaw Cycling and Sustained loads», Journal of Cement and Concrete Composites, 28, 10, 869-878, 2006.
el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «Behaviour of Concrete Bridge Deck Slabs Reinforced with Fiber-Reinforced polymer Bars under Concentrated loads», aCI Structural J., 102, 5, 727-735, 2005.
el-Salakawy, e.F., Benmokrane, B., Brière, F., «Glass FRp Composite Bars for Concrete Bridge Barriers», Journal of Science and engineering of Composite Materials, 12, 3, 167-192, 2005.
el-Salakawy, e.F., Benmokrane, B., el-Ragaby, a., nadeau, D., «Field Investigation on the First Bridge Deck Slab Reinforced with Glass FRp Bars Constructed in Canada», aSCe Journal of Composites for Construction», 9, 6, 470-479, 2005.
el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Shear Strength of one-way Concrete Slabs Reinforced with FRp Composite Bars», aSCe Journal of Composites for Construction, 9, 2, 147-157, 2005.
nkurunziza, G., Benmokrane, B., Debaiky, a.S., Masmoudi, R., «effect of Sustained load and environment on long-term tensile properties of Glass Fiber-Reinforced polymer Reinforcing Bars», aCI Structural J., 102, 4, 615-621, 2005.
nkurunziza, G., Debaiky, a.S., Cousin, p., Benmokrane, B., «Durability of GFRp Bars: a Critical Review of the literature», prog. In Struct. eng. & Mat., 7, 4, 194-209, 2005.
Zhang, B.p., Benmokrane, B., «large Model test of prestressed Carbon Fibre Reinforced polymer Ground anchors», Can. J. Civ. eng., 32, 6, 1064-1074, 2005.
Benmokrane, B., el-Salakawy, e.F., Cherrak, Z., Wiseman, a., «FRp Composite Bars for the Structural Concrete Slabs of a pWGSC parking Garage», Can. J. of Civil eng., 31, 5, 732-748, 2004.
Benmokrane, B., el-Salakawy, e.F., Desgagné, G., lackey, t., «Building a new Generation of Concrete Bridge Decks using FRp Bars», Concrete International, the Magazine of aCI, 26, 8, 84-90, 2004.
el-Salakawy, e.F., Benmokrane, B., «Serviceability of Concrete Bridge deck Slabs Reinforced with FRp Composite Bars», aCI Structural Journal, 101, 5, 727-736, 2004.
Zhang, B., Benmokrane, B., «Design and evaluation of a new bond-type anchorage system for fiber reinforced polymer tendons», Can. J. of Civil eng., 31, 1, 14-26, 2004.
Bouffard, J., Dumont, H., Bertrand, F., legros, R., «optimization and Scale up of a Fluid Bed tangential Spray Rotogranulation process», Int. J. pharmaceutics, 335, 54-62, 2007.
Devals, C., Heniche, M., Bertrand, F., tanguy, p.a., Hayes, R.e., «a two-phase Flow Interface Capturing Finite element Method», Int. J. num. Meth. Fluids, 53, 735-751, 2007.
lemieux, M., Bertrand, F., Chaouki, J., Gosselin, p., «Comparative Study of the Mixing of Free-Flowing particles in a V-blender and a Bin-blender», Chem. eng. Sci, 62, 1783-1802, 2007.
Savarmand, S., Heniche, M., Béchard, V., Bertrand, F., Carreau, p.J., «analysis of the Vane Rheometer using 3D Finite element Simulation», Journal of Rheology, 51, 2, 161-177, 2007.
Doucet, J., Bertrand, F., Chaouki, J., «an extended Radioactive particle tracking Method for Systems with Irregular Moving Boundaries», powder technology, sous presse, 2006.
Giguère, R., Bertrand, F., tanguy, p.a., «a three-Dimensional Mesh Refinement Strategy for the Simulation of Fluid Flow with a Fictitious Domain Method», Comp. Chem. eng., 30, 453-466, 2006.
Iranshahi, a., Heniche, M., Bertrand, F., tanguy, p.a., «numerical Investigation of the Mixing efficiency of the ekato paravisc Impeller», Chem. eng. Sci., 61, 2609-2617, 2006.
lemieux, M., léonard, G., Doucet, J., leclaire, l.-a., Bertrand, F., Chaouki, J., «large-Scale numerical Investigation of Solids Mixing in a V-Blender using the Discrete element Method», powder technology, sous presse, 2006.
36
CREPEC Rapport annuel 2006-2007 annual Report 37
léonard, G., Bertrand, F., Chaouki, J., Gosselin, p.M., «an experimental Investigation of effusivity as an Indicator of powder Blend uniformity», powder technology, sous presse, 2006.
litto, R., Hayes, R.e., Sapoudjiev, H., Fuxman, a., Forbes, F., liu, B., Bertrand, F., «optimization of a Flow Reversal Reactor for the Catalytic Combustion of lean Methane Mixtures», Catalysis today, 117, 136-142, 2006.
navaee-ardeh, S., Bertrand, F., Stuart, p., «emerging Biodrying technology for the Drying of pulp and paper Mixed Sludges», Drying technology Journal, 24, 863-878, 2006.
Bertrand, F., leclaire, l.-a., levecque, G., «DeM-Based Models for the Mixing of Granular Materials», Chem. eng. Sci., 60, 2517-2531, 2005.
Devals, C., Heniche, M., Bertrand, F., Hayes, R.e., tanguy, p.a., «a finite element Strategy for the Solution of Interface tracking problems», Int. J. num. Meth. Fluids, 49, 1305-1327, 2005.
Mmbaga, J., Hayes, R.e., Bertrand, F., tanguy, p.a., «Flow Simulation in the nip of a Rigid Forward Roll Coater», Int. J. num. Meth. Fluids, 48, 1041-1066, 2005.
Bertrand, F., Gange, t., Desaulniers, e., Vidal, D., Hayes, R.e., «Simulation of the Consolidation of papers Coating Structures: Should one use probabilistic or Deterministic Models?», Comp. Chem. eng., 28, 2595-2604, 2004.
Fortin, a., Bertrand, F., Fortin, M., Chamberland, e., el Maliki, a., najeh, n., «an adaptive Remeshing Strategy for Shear-thinning Fluid Flow Simulations», Comp. Chem. eng., 28, 2363-2375, 2004.
Ben Daly, H., Ben Brahim, H., Hfaied, n., Harchay, M., Boukhili, R., « Investigation of Water absorption in pultruded Composites Containing Fillers and low profile additives », polymer Composites, 28, 3, 355-364, 2007.
Boukhili, R., Boukehili, H., Ben Daly, H., Gasmi, a., «physical and mechanical properties of pultruded composites containing fillers and low profile additives», polymer Composites, 27, 1, 71-81, 2006.
Boukhili, R., Boukehili, H., Ben Daly, H., Gasmi, a., «physical and Mechanical properties of pultruded Composites Containing Fillers and low profile additives», polymer Composites, 27, 1, 71-81,2006.
taib, a.a., Boukhili, R., achiou, S., Gordon, S., Boukehili, H., «Bonded Joints with Composite adherends. part I: effect of Specimen Configuration, adhesive thickness, Spew Fillet and adherend Stiffness on Fracture», International Journal of adhesion & adhesives, 26, 226–236, 2006.
taib, a.a., Boukhili, R., achiou, S., Gordon, S., Boukehili, H., «Bonded Joints with Composite adherends. part II: Finite element analysis of Joggle lap Joints», International Journal of adhesion & adhesives, 26, 237–248, 2006.
Charlebois, K.M., Boukhili, R., Zebdi, o., trochu, F., Gasmi, a., «evaluation of the physical and Mechanical properties of Braided Fabrics and their Composites», Journal of Reinforced plastics and Composites, 24, 1539 – 1554, 2005.
ait-Kadi, a., Youssefi, a., Bousmina, M., Mighri, F., «High performance Structured polymer Barrier Films obtained from Compatibilized pp/eVoH Blends», polym eng. Sci., 47, 1114-1121, 2007.
Benmousa, K., Fortin, a., Bousmina, M., «Direct 2D Simulation of Small Gas Bubble Clusters», Int. J. numerical Methods in Fluids, 54, 73-101, 2007.
el Mabrouk, K., Belaiche, M., Bousmina, M., «phase Separation in pS/pVMe thin and thick Films», Journal of Colloid and Interface Science, 306, 354-367, 2007.
lavoie, a., Riedl, B., Bousmina, M., «Study of Interactions is San/pMMa Blend by IGC», J. polym. eng, 27, 129-148, 2007.
Mechbal, n., and M. Bousmina, «effect of Copolymer addition on Drop Deformation During uniaxial elongation and During Relaxation after Cessation of Flow», Macromolecules, 40, 967-975, 2007.
Vaudreuil, S., labzour, a., Sinha-Ray, S., el Mabrouk, K., Bousmina, M., «Dispersion Characteristics and properties of poly(methyl methacrylate)/Multi-Walled Carbon nanotubes nanocomposites», Journal of nanoscience and nanotechnology, 7, 2349-2355, 2007.
Bousmina, M., «Mechanism of exfoliation in pncss», Macromolecules, 39, 4259-4263, 2006.
Danumah, C., Ray, S.S., Kaliaguine, S., Bousmina, M., «Intercalation/exfoliation Mechanism of Hybrid Formation in polypropylene/lamellar Mesostructured Silica nanocomposites», J. nanoscience and nanotechnology, 6, 2, 523-529, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Dumont, M.J., Reyna, a., Émond, J.p., Bousmina, M., «Barrier properties of pp/organoclay nanocomposites», J. app. polym. Sci., 103, 618-615, 2006.
el Mabrouk, K., Bousmina, M., «phase Separation of polystyrene/poly (Vinylmethylether)/organoclay nanocomposites», J. nanoscience and nanotechnology, 6, 2, 472-482, 2006.
el Mebrouk, K., Bousmina, M., «phase Separat. in pS/pVMe», Rheol. acta, 45, 877-889, 2006.
el Mebrouk, K., Bousmina, M., «Molecular Weight and Shear effects on phase Separation Diagram of pS/pVMe Blends», Rheol. acta, 45, 959-969, 2006.
Gaboune, a., Ray, S.S., ait-Kadi, a., Riedl, B., Bousmina, M., «polyethylene/Clay nanocomposites prepared by polymerization Compounding Method», J. nanoscience and nanotechnology, 6, 2, 530-535, 2006.
Reyna-Valencia, a., Kaliaguine, S., Bousmina, M., «Structural and Mechanical Characterization of poly(ether ether Ketone) (peeK) and Sulfonated peeK Films: effects of thermal History, Sulfonation and preparation», J. appli. polym. Sci., 99, 3, 756-774, 2006.
Sinha-Ray, S., Bousmina, M., «pC/pMMa/Clay nanocomposites», poly. eng. Sci., 46, 1121-1129, 2006.
Sinha-Ray, S., Bousmina, M., «Cryst. pBSa/Clay», Macromol. Chem. phys., 207, 1207–1219, 2006.
Sinha-Ray, S., Vaudreuil, S., Mazzouz, a., Bousmina, M., «Dispersion of Multi-Walled Carbon nanotubes in Biodegradable pBSa Matrix, J. nanosci nanotechnol, 6, 2191-5, 2006.
Yu, W., Bousmina, M., «note on the Morphology Determination in emulsion via Rheology», J. non-newt. Fluid Mech., 133, 1, 57-62, 2006.
Zhang, Y., Zhang, S.W., Hei Chui, Y., Wan, H., Bousmina, M., «Wood plastic Composites by Melt Impregnation: polymer Retention and Hardness», J. appl. poly. Sci., 46/1, 114-121, 2006.
el Mabrouk, K., Bousmina, M., «effect of Hydrodynamics on Dynamics of phase Separation of polystyrene / poly (Vinyl methyl ether) Blend», polymer, 46, 21, 9005-9014, 2005.
Iza, M., Bousmina, M., «Damping Function for narrow and large Molecular Weight polymers: Comparison with the Force-Balanced network Model», Rheologica acta, 44, 4, 372-378, 2005.
Ray, S.S., Bousmina, M., «Compatibilization efficiency of organoclay in an Immiscible polycarbonate/poly(Methyl Methacrylate) Blend», Macromolecular Rapid Communications, 26, 6, 450-455, 2005.
Ray, S.S., Bousmina, M., «effect of organic Modification on the Compatibilization efficiency of Clay in an Immiscible polymer Blend», Macromolecular Rapid Communications, 26, 20, 1639-1646, 2005.
Ray, S.S., Bousmina, M., «poly(Butylene Sucinate-co-adipate)/ Montmorillonite nanocomposites: effect of organic Modifier Miscibility on Structure, properties and Viscoelasticity», polymer, 46, 26, 12430-12439, 2005.
Ray, S.S., Bousmina, M., «Biodegradable polymers and their layered Silicate nano Composites: In Greening the 21st Century Materials World», progress in Material Science, 50, 8, 962-1079, 2005.
Ray, S.S., Bousmina, M., okamoto, K., «Structure and properties of nanocomposites Based on poly(Butylene Succinate-co-adipate) and organically Modified Montmorillonite», Macromolecular Materials and engineering, 290, 8, 759-768, 2005.
Reyna-Valencia, a., Kaliaguine, S., Bousmina, M., «tensile Mechanical properties of Sulfonated poly(ether ether Ketone) (peeK) and Bp04/SppeK Membranes», J. appli. polym. Sci., 98, 6, 2380-2393, 2005.
Sinha, S.R., Bousmina, M., «Biodegradable polymers and their layered Silicate nanocomposites», Greening the 21st Century Materials World. progress in Materials Science, 50, 962-1079, 2005.
Yu, W., Zhou, C.X., Bousmina, M., «theory of Morphology evolution in Mixture of Viscoelastic Immiscible Components», J. of Rheology, 49, 1, 215-236, 2005.
Zkiek, a., Yu, W., Bousmina, M., Grmela, M., «transient Stress and Interfacial area Generated during Breakup of a newtonian thread Immersed in a newtonian Medium», Rheol. acta, 43, 333-342, 2004.
ait-Kadi, a., Youssefi, a., Bousmina, M., Mighri, F., «High performance Structured polymer Barrier Films obtained from Compatibilized pp/eVoH Blends», polym eng. Sci., 47, 1114-1121, 2007.
38
CREPEC Rapport annuel 2006-2007 annual Report 39
Benmousa, K., Fortin, a., Bousmina, M., «Direct 2D Simulation of Small Gas Bubble Clusters», Int. J. numerical Methods in Fluids, 54, 73-101, 2007.
el Mabrouk, K., Belaiche, M., Bousmina, M., «phase Separation in pS/pVMe thin and thick Films», Journal of Colloid and Interface Science, 306, 354-367, 2007.
lavoie, a., Riedl, B., Bousmina, M., «Study of Interactions is San/pMMa Blend by IGC», J. polym. eng, 27, 129-148, 2007.
Mechbal, n., Bousmina, M., « effect of Copolymer addition on Drop Deformation During uniaxial elon-gation and During Relaxation after Cessation of Flow. Macromolecules», 40, 967-975, 2007.
Vaudreuil, S., labzour, a., Sinha-Ray, S., el Mabrouk, K., Bousmina, M., «Dispersion Characteristics and properties of poly(methyl methacrylate)/Multi-Walled Carbon nanotubes nanocomposites», Journal of na-noscience and nanotechnology, 7, 2349-2355, 2007.
Bousmina, M., «Mechanism of exfoliation in pncss», Macromolecules, 39, 4259-4263, 2006.
Danumah, C., Ray, S.S., Kaliaguine, S., Bousmina, M., «Intercalation/exfoliation Mechanism of Hybrid Formation in polypropylene/lamellar Mesostructured Silica nanocomposites», J. nanoscience and nanotechnology, 6, 2, 523-529, 2006.
Dumont, M.J., Reyna, a., Émond, J.p., Bousmina, M., «Barrier properties of pp/organoclay nanocomposites», J. app. polym. Sci., 103, 618-615, 2006.
el Mabrouk, K., Bousmina, M., «phase Separation of polystyrene/poly (Vinylmethylether)/organoclay nanocomposites», J. nanoscience and nanotechno-logy, 6, 2, 472-482, 2006.
el Mebrouk, K., Bousmina, M., «phase Separat. in pS/pVMe», Rheol. acta, 45, 877-889, 2006.
el Mebrouk, K., Bousmina, M., «Molecular Weight and Shear effects on phase Separation Diagram of pS/pVMe Blends», Rheol. acta, 45, 959-969, 2006.
Gaboune, a., Ray, S.S., ait-Kadi, a., Riedl, B., Bousmina, M., «polyethylene/Clay nanocomposites prepared by polymerization Compounding Method», J. nanoscience and nanotechnology, 6, 2, 530-535, 2006.
Reyna-Valencia, a., Kaliaguine, S., Bousmina, M., «Structural and Mechanical Characterization of poly(ether ether Ketone) (peeK) and Sulfonated peeK Films: effects of thermal History, Sulfonation and preparation», J. appli. polym. Sci., 99, 3, 756-774, 2006.
Sinha-Ray, S., Bousmina, M., «pC/pMMa/Clay nanocomposites», poly. eng. Sci., 46, 1121-1129, 2006.
Sinha-Ray, S., Bousmina, M., «Cryst. pBSa/Clay», Macromol. Chem. phys., 207, 1207–1219, 2006.
Sinha-Ray, S., Vaudreuil, S., Mazzouz, a., Bousmina, M., «Dispersion of Multi-Walled Carbon nanotubes in Biodegradable pBSa Matrix, J. nanosci nanotechnol, 6, 2191-5, 2006.
Yu, W., Bousmina, M., «note on the Morphology Determination in emulsion via Rheology», J. non-newt. Fluid Mech., 133, 1, 57-62, 2006.
Zhang, Y., Zhang, S.W., Hei Chui, Y., Wan, H., Bousmina, M., «Wood plastic Composites by Melt Impregnation: polymer Retention and Hardness», J. appl. poly. Sci., 46/1, 114-121, 2006.
el Mabrouk, K., Bousmina, M., «effect of Hydrodynamics on Dynamics of phase Separation of polystyrene / poly (Vinyl methyl ether) Blend», polymer, 46, 21, 9005-9014, 2005.
Iza, M., Bousmina, M., «Damping Function for narrow and large Molecular Weight polymers: Comparison with the Force-Balanced network Model», Rheologica acta, 44, 4, 372-378, 2005.
Ray, S.S., Bousmina, M., «Compatibilization efficiency of organoclay in an Immiscible polycarbonate/poly(Methyl Methacrylate) Blend», Macromolecular Rapid Communications, 26, 6, 450-455, 2005.
Ray, S.S., Bousmina, M., «effect of organic Modification on the Compatibilization efficiency of Clay in an Immiscible polymer Blend», Macromolecular Rapid Communications, 26, 20, 1639-1646, 2005.
Ray, S.S., Bousmina, M., «poly(Butylene Sucinate-co-adipate)/ Montmorillonite nanocomposites: effect of organic Modifier Miscibility on Structure, properties and Viscoelasticity», polymer, 46, 26, 12430-12439, 2005.
CREPEC Rapport annuel 2006-2007 annual Report
Ray, S.S., Bousmina, M., «Biodegradable polymers and their layered Silicate nano Composites: In Greening the 21st Century Materials World», progress in Material Science, 50, 8, 962-1079, 2005.
Ray, S.S., Bousmina, M., okamoto, K., «Structure and properties of nanocomposites Based on poly(Butylene Succinate-co-adipate) and organically Modified Montmorillonite», Macromolecular Materials and engineering, 290, 8, 759-768, 2005.
Reyna-Valencia, a., Kaliaguine, S., Bousmina, M., «tensile Mechanical properties of Sulfonated poly(ether ether Ketone) (peeK) and Bp04/SppeK Membranes», J. appli. polym. Sci., 98, 6, 2380-2393, 2005.
Sinha, S.R., Bousmina, M., «Biodegradable polymers and their layered Silicate nanocomposites», Greening the 21st Century Materials World. progress in Materials Science, 50, 962-1079, 2005.
Yu, W., Zhou, C.X., Bousmina, M., «theory of Morphology evolution in Mixture of Viscoelastic Immiscible Components», J. of Rheology, 49, 1, 215-236, 2005.
Zkiek, a., Yu, W., Bousmina, M., Grmela, M., «transient Stress and Interfacial area Generated during Breakup of a newtonian thread Immersed in a newtonian Medium», Rheol. acta, 43, 333-342, 2004.
Brailovski, V., prokoshkin, S., Khemelevskaya, I., Inaekyan, K., Demers, V., Dobatkin, S., tatyanin. e., «Interrelations Between the properties and Structure of thermomechanically-treated equiatomic ti-ni alloy», Materials Sci. & eng., a-483-440, 597-601, 2006.
Brailovski, V., prokoshkin, S., Khemelevskaya, I., Inaekyan, K., Demers, V., Dobatkin, S., tatyanin. e., «Structure and properties of the ti-50.0 at % ni alloy after Strain Hardening and nanocrystallizing thermomechanical processing», Materials transactions, 47, 3, 795-904, 2006.
Demers, V., Brailovski, V., prokoshkin, S., Inaekyan, K., Bastarash, e., Khemelevskaya, I., Dobatkin, S., «Fuctional properties of nanostructured ti-50.0 at % ni alloy», J. of aStM Int. (JaI), 3, 6, 2006.
prokoshkin, S., Brailovski, V., Khmelevskaya, I., Dobatkin, S., Inaekyan, K., turilina, V., Demers, V. tatyanin. e., «Creation of Substructure and nanostructure in thermomechanical treatement and Control of Functional properties of ti-ni alloys with Shape Memory effect», Metal Science and Heat treatment, 47, 5-6, 182-187, 2005.
Brailovski, V., Khemelevskaya, I.Y., prokoskhkin, S.D., puschin, V.G., Ryklina, e.p., Valiev, R.Z. «Foundation of heat and therrmomechanical treatments and their effect on the structure and properties of titanium-nickelide based alloys», Supplement to the physics of Metals and Metallography, 97, 1, 3- 55, 2004.
prokoshkin, S.D., Khmelevskaya, I.Y., Brailovski, V., trochu, F., turenne, S., turili-na, V.Y, «thermomechanical ttreatments and their Influence on the Microstructure and Stress-Strain Diagrams of niti Shape Memory alloys», Can. Metall. Quart., 43, 1, 95-108, 2004.
prokoshkin, S.D., Korotitskiy, a.V., Brailovski, V., turenne, S., Khmelevskaya, I.Y., trubitsina, I.B., «on the lattice parameters of phases in Binary ti-ni Shape Memory alloys», acta Materialia, 52, 4479-4492, 2004.
letwimolnun, W., Vergnes, B., ausias, G., Carreau, p.J., «Stress overshoot of organoclay nanocomposites in transient Shear Flow», J. non-newt. Fluid Mech., 141, 167-179, 2007.
Billotte, C., Carreau, p.J., Heuzey, M.C., «Rheological Characterization of a Solder paste for Surface Mount applications», Rheol. acta, 45, 374-386, 2006.
Sosa, a., ascanio, G., Carreau, p.J., Guerrero, C., tanguy, p.a., «the effect of thickener on the Rheology of Coating Colors», Chem. eng. Comm., 193, 917-928, 2006.
Hashemi, a., ait-Kadi, a., Carreau, p.J., «the Influence of Surface treatment of Fibres on the properties of Glass Fiber/pa6,6 Composites», J. polym. eng., 26, 1-19, 2006.
arzate, a., ascanio, G., Carreau, p.J., tanguy, p.a., «extensional Viscosity of Coating Colors and its Relation with Jet Coating performance», J. appl. Rheol., 14, 240-250, 2005.
ascanio, G., Carreau, p.J., tanguy, p.a., «extensional Rheology of Coating Suspensions in Roll Coating», nordic pulp and paper Research J., 20, 48-53, 2005.
ascanio, G., Carreau, p.J., tanguy, p.a., «High-Speed Roll Coating with Complex Rheology Fluids», experiments in Fluids, 40, 1-14, 2005.
Dufaure, n., Carreau, p.J., Heuzey, M.C., Michel, a., «phase Inversion in Immiscible Blends of pe and Reactive eVa», J. polym. eng., 25, 187-216, 2005.
40
CREPEC Rapport annuel 2006-2007 annual Report 41
Fang, Y., Carreau, p.J., lafleur, p.G., «thermal and Rheological properties of mllDpe/lDpe Blends», polym. eng. Sci., 45, 1254-1264, 2005.
Ferretti, a., Carreau, p.J., «Rheological and Mechanical properties of peo/Block Copolymer Blends», polym. eng. Sci., 45, 1385-1394, 2005.
Mobuchon C., Carreau p.J., Heuzey M.C., Sepehr M., ausias G., «Shear and extensional properties of Short Glass Fiber Filled polypropylene», polymer Composites, 26, 247-264, 2005.
thomasset, J., Carreau, p.J., Sanschagrin, B., ausias, G., «Rheological properties of long Fiber Filled polypropylene», J. non-newt. Fluid. Mech., 125, 25-34, 2005.
ascanio, G., Carreau, p.J., Brito de la Fuente, e., tanguy, p.a., «Forward Deformable Roll Coating at High Speed with newtonian Fluids», Chem. eng. Res. Des., 82, 390-397, 2004.
Banick, I., Carreau, p.J., Schreiber, H.p., «temperature - Dependent polymer – polymer Interactins in pS-pe Blends» , J. polym. Sci., 42, 2545-2557, 2004.
el-Sadi, H., Carreau, p.J., esmail, n., «Changes in the Rheologgical and Colloïdal properties of paper Coating liquids with paper-Yellowing Inhibition additives» , J. Coll. Inter. Sci., 271, 496-503, 2004.
Hashemi, S.a., ait-Kadi, a., Carreau, p.J., «the Influence of Surface treatment of Fibres on the properties of Glass Fiber/pa6,6 Composites», J. polym. eng., 25, 187-216, 2004.
Sepehr, M., ausias, G., Carreau, p.J., «Comportement rhéologique dans des écoulements transitoires en cisaillement simple des polymères fortement chargés en fibres courtes» , Mécanique & Industries, 5, 419-428, 2004.
Sepehr, M., ausias, G., Carreau, p.J., «Rheological properties of Short Fiber Filled polypropylene in transient Shear Flow» , J. non-newt. Fluid. Mech., 123, 19-32, 2004.
Sepehr, M., Carreau, p.J., Grmela, M., ausias, G., lafleur, p.G., «Comparison of Rheological properties of Fiber Suspensions with Model predictions» , J. of polym. Sci., 24, 579-610, 2004.
Sepehr, M., Carreau, p.J., Moan, M., ausias, G., «Rheological properties of Short Fiber Model Suspensions» , J. Rheol., 48, 1023-1048, 2004.
arockiasamy, M., Chaallal, o., limpeteeprakarm, t., «Full-Scale Field tests on Flexible pipes under live load application», J. performance of Constructed Facilities, aSCe, 20, 21-27, 2006.
Bousselham, a., Chaallal, o., «effect of transverse Steel and Shear Span on the performance of RC Beams Strengthened with FRp Composites», Composites: part B - elsevier, 37, 37-46, 2006.
Chaallal, o., Sieprawski, G., Guizani, l., «Fatigue performance Modular Bridge expansion Joints for Bridges», Can. J. of Civ. eng., 33, 921-932, 2006.
lan, a., leBoeuf, D., Chaallal, o., Daigle, R., «Validation of Shoring Made of High density polyethylene (HDpe) or corrugated galvanized steel (CGS) pipe normally used for Culverts and Sewers», Structural Design and Construction Journal, aSCe, 11, 1, 39-40, 2006.
Bousselham, a., Chaallal, o., «Contribution à l’étude du renforcement en cisaillement des poutres en Ba à l’aide de matériaux composites avancés», Rev. Can. G. Civil, 32, 339-351, 2005.
Bousselham, a., Chaallal, o., «Shear Strengthened RC Beams with FRp: assessment of Influencing parameters and Required Research», aCI Structural J., 101, 3, 219-227, 2004.
Bousselham, a., Chaallal, o., « Behavior of RC t-Beams Strengthened in Shear with CFRp – an experimental Study », aCI Structural J., 103, 3, 339-347, 2004.
Chaallal, o., Hassan, M., Shahawy, M., « CFRp Repair and Strengthening of Structurally Deficient piles: Design Issues and Filed application », J. of Composites for Construction, aSCe., 10, 1, 26-34, 2004.
Defersha, M.F., Chen, M., « a comprehensive mathematical model for the design of cellular manufacturing system », International Journel of production economics, 103, 2, 767-783, 2006.
Defersha, M.F., Chen, M., «Machine cell formation using a mathematical model and a genetic algorithm based heuristic », Int. J. of production Research, 44, 12, 2421–2444, 2006.
albadawi, Z., Bashir, H., Chen, M., «a Mathematical approach for the Manufacturing Cell Formation», Computers and Industrial eng.: an Int. J., 48, 3-21, 2005.
CREPEC Rapport annuel 2006-2007 annual Report
Cao, D., Chen, M., «a Robust Cell Formation approach for Varying product Demands», Int. J. of production Research, 43, 1587-1605, 2005.
Cao, D., Chen, M., «a Mixed Integer programming Model for a two line ConWIp-Based production and assembly System», Int. J. of production economics, 95, 317-326, 2005.
Sun, Z., Yan, J., Jen, C.-K., Chen, M., «application of ultrasound and neural networks in the Determination of Filler Dispersion During polymer extrusion processes», polym. eng.and Sci., 45, 764-772, 2005.
Cao, D., Chen, M., Wan, G., «parallel Machine Selection and Job Scheduling to Minimize Machine Cost and Job tardiness», Computers and operations Research, 32, 1995-2012, 2004.
Cao, D., Chen, M., «using penalty Function and tabu Search to Solve Cell Formation problems with Fixed Cell Cost», Computers and operations Research, 31, 21-37, 2004.
Chen, M., Cao, D., «Coordinating production planning in Cellular Manufacturing environment using tabu Search», Comp. and Ind. eng.: an Int. J., 46, 571-588, 2004.
Ben Daly H., Cole K. C., nguyen K. t., Sanschagrin B., «Characterization of Molecular orientation in Injection–Stretch–Blow-Molded poly(ethylene tereph-thalate) Bottles by Means of external Reflection Infrared Spectroscopy», Journal of applied polymer Science, 104, 1319-1327, 2007.
Cole, K.C., perrin-Sarazin, F., Dorval-Douville, G., «Infrared Spectroscopic Characterization of polymer and Clay platelet orientation in Blown Films Based on polypropylene-Clay nanocomposite», Macromol. Symp., 230, 1-10, (2005).
tanoue, S., utracki, l.a., Garcia-Rejon, a., tatibouët, J. Cole, K.C., Kamal, M.R., «Melt Compounding of Different Grades of polystyrene with organoclay part 3: Mechanical properties», polym. eng. & Sci., 45, 6, 827-837, 2005.
Bendada, a., Cole, K.C., lamontagne, M., Simard, Y., «Infrared Radiometry using a Dielectric-Silver-Coated Hollow Glass Waveguide for polymer processing», Infrared physics and technology, 45, 59-68, 2004.
Cole, K.C., Denautl, J., Bureau, M.n., «Infrared Spectroscopy Studies of Structure and orientation in Clay-Reinforced polyamide-6 nanocomposites», Macromol. Symp., 205, 47-60, 2004.
Cole, K.C., Depecker, C., Jutigny, M., lefebvre, J.M., Krawczak, p., «Biaxial Deformation of polyamide-6: assessment of orientation by Means of Infrared trichroism», polym. eng. Sci., 44, 231-240, 2004.
tanoue, S., utracki, l.a., Garcia-Rejon, a., tatibouët, J. Cole, K.C., Kamal, M.R., «Melt Compounding of Different Grades of polystyrene with organoclay, part 1: Compounding and Characterization», polym. eng. Sci., 44, 1046-1060, 2004.
tanoue, S., utracki, l.a., Garcia-Rejon, a., tatibouët, J. Cole, K.C., Kamal, M.R., «Melt Compounding of Different Grades of polystyrene with organoclay part 2: Rheological properties», polym. eng. & Sci., 44, 5, 1061-1076, 2004.
Dano, M.l., Kamal, e., Gendron, G., «analysis of Bolted Joints in Composite laminates: Strains and Bearing Stiffness prediction», Composite Structures, 79, 4, 562-570, 2007.
Dano, M.l., Gendron, G., Maillette, F., Bissonnette, B., «experimental Characterization of Damage of Random Short Glass Fiber Reinforced Composites», J. thermo. Comp. Mat., 19, 1, 79-96, 2005.
Mir, H., Fafard, M., Bissonnette, B., Dano, M.l., «Damage Modelling in Random Short Glass Fiber Reinforced Composites unducing permanent Strain and unilateral effect», J. appl. Mech., 72, 2, 249-258, 2005.
Gendron, G., Dano, M.l., Cloutier, a., «a numerical Study of the Hygro-Mechanical Deformation of two Cardboard layups», Comp. Sci. and tech. J., 64, 619-627, 2004.
David, e., lamarre, l., «low-Frequency Dielectric response of epoxy-Mica Insulated Generator Bars During Multi-Stress aging», Ieee trans. on Dielectr. and electr. Insul., 14, 212-226, 2007.
David, e., «Influence of Risetime on the Dielectric parameters extracted from time Domain Spectroscopy», Ieee trans. on Dielectr. and electr. Insul., 12, 423-428, 2005.
42
CREPEC Rapport annuel 2006-2007 annual Report 43
Ilinca, F., Hétu, J.-F., Derdouri, a., «numerical Investigation of the Flow Front Behavior in the Co-Injection Molding process», Int. J. for num. Meth. In Fluids, 50, 1445-1460, 2006.
Bendada, a., Derdouri, a., lamontagne, M., Simard, Y., «analysis of thermal Contact Resistance Between polymer and Mold in Injection Molding», applied thermal eng., 24, 2029-2040, 2004.
Dubois, C., Rodrigue, D., Rajabian, M., «polymerization Compounding of polyurethane Fumed Silica Composites», polym. eng. Sci., 46, 360-371, 2006.
Gao, Y., Guo, n., Gavreau, B., Rajabian, M., Skorobogatiy, o., Zabeida, o., Martinu, l., Dubois, C., Skorobogatiy, M., «Consecutive Solvent evaporation technique to Fabricate polymer Multilayer Hollow Fiber preforms», J. Mater. Res. 21, 2246-2254, 2006.
Mary, B., Dubois, C., Carreau, p.J., Brousseau, p., “Rheological properties of Suspensions of polyethylene-Coated aluminium nanoparticles”, Rheol. acta, 45, 561-573, 2006.
pone, e., Dubois, C., lacroix, C., Skorobogatiy, M., «Drawing of the hollow multilayer microstructured optical fibers», opt. express, 14, 5838-5852, 2006.
Rajabian, M., Dubois, C., «polymerization Compoun-ding of HDpe/ Kevlar Composites: Morphology and Mechanical properties», polym. Comp., 27, 129-137, 2006.
Ringuette, S., Dubois, C., Charlet, G., Kwok, Q., Jones, D. e. G., and Stowe, R., «assessment of the deuterium effect on thermal decomposition of deuterated Gap. 1 Slow thermal analysis with a tGa-Dta-FtIR-MS», Journal of energetic Materials, 24, 307-320, 2006.
Ringuette, S., Dubois, C., Stowe, R. a., «Synthesis and Characterization of Deuterated Glycidyl azide polymer (Gap)», propellants, explosives and pyrotechnics, sous presse, 2006.
Ringuette, S., Dubois, C., Stowe, R. a., and Charlet, G., «Synthesis and Characterization of Deuterated Glycidyl azide polymer (Gap)», propellants, explosives and pyrotechnics, 31, 131-138, 2006.
Rajabian, M., Dubois, C., Grmela, M., «Suspensions of Semiflexible Fibers in polymeric Fluids : Rheology and thermodynamics», Rheol. acta, 44, 521-535, 2005.
Robidoux, p.Y., Dubois C., Hawari J., and Sunahara G.I., «assessment of an antitank firing range using lumbricus terrestris and eisenia andrei in mesocosms and laboratory studies» ecotoxicology, 13, 603–614, 2004.
Robidoux, p. Y., Gong, p., Sarrazin, M., Bardai, G., paquet, l., Hawari, J., Dubois, C., Sunahara G. I., «toxicity assessment of contaminated soils from an antitank firing range» ecotoxicology and environmental Safety, 58, 300–313, 2004.
Roy, C., Dubois C., lafleur p., and Brousseau p., «the dispersion and polymer coating of ultrafine aluminum powders by the Ziegler natta reaction», Mat. Res. Soc. Symp. proc., 800, aa2.5.1-aa2.5.7, 2004.
Stowe, R., Dubois, C., Harris, p. G., Mayer, a., de Champlain, a., Ringuette, S., «performance predication of a ducted rocket combustor using a simulated solid fuel», propulsion and power, 20, 936-944, 2004.
Maladi, a., Dufour, S., n’dri, D., «a Study of time Integration Schemes for the numerical Modelling of Free Surface Flows», Int. J. for num. Meth. In Fluids, 48, 1123-1147, 2005.
Mokwinski, Y., Dufour, S., Guibault, F., «a transient adaptive Methodology for Modeling Free Surface Flows», Int. J. for num. Meth. In eng., 2005.
Vallet, M.-G., Manole, C.-M., Dompierre, J., Guibault, F., Dufour, S., «Benchmarking Second order Derivatives Recovery of a piecewise linear Scalar Field», Int. J. for num. Meth. In eng., 2005.
Dufour, S., Maladi, a., «a Free Surface updating Methodology for Marker-Function Based eulerian Free Surface Capturing techniques on unstructured Meshes», Comm. In numerical Meth. In eng., 20, 857-867, 2004.
le, M., Hassan, I., esmail, n., «the effects of outlet Boundary Conditions on Simulating Supersonic Microchannel unsing DSMC», Journal of applied thermal engineering, 27, 21-30, 2007.
el-Sadi, H., esmail, n., «Simulation of three-Dimensional transient performance in Micro-pump», Sensors & actuators: B. Chemical, 115, 510-518, 2006.
Mamdouh, t., Ghannam, M., esmail, n., «Flow enhancement of Medium Viscosity Crude oil», Journal of petroleum Science and technology, 24, 8, 985-999, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
abdelgawad, M., Hassan, I., esmail, n., phutthavong, p., «numerical Investigation of Multistage Viscous Micropump Configurations», J. Fluids eng. trans. of the aSMe, 127, 4, 734-742, 2005.
aboelkassem, Y., Vatistas, G.H., el-Sadi, H., esmail, n., «Viscous Dissipation of Rankine Vortex profile in Zero Meridional Flow», acta Mechanica Sinica, 21, 6, 550-556, 2005.
el-Sadi, H., esmail, n., «effect of Yellowing Inhibitors on the Brightness Stability, Rheological properties and Water Retention of paper Coating», Can. J. Chem. eng., 83, 2, 383-388, 2005.
el-Sadi, H., esmail, n., «the effects of Screws Geometry on the pumping efficiency of Micro-Screw pump», Can. J. Chem. eng., 83, 6, 944-950, 2005.
el-Sadi, H., esmail, n., «Simulation of Complex liquids in Micropump», Microelectronic J., 36, 7, 657-666, 2005.
el-Sadi, H., esmail, n., Girgis, S., Marini, R., «CFD analysis of the effect of turbine Coverplate Geometry on the Blade Coolant Feed System Cavity», transactions International association of Mechanical engineers (IaSMe), 6, 2, 1079-1086, 2005.
Ghannam, M.t., esmail, n., «Yield Stress Behavior for Crude oil-polymer emulsions», J. of petroleum Sci, & eng., 47, 3-4, 105-115, 2005.
Mamdouh, t., Ghannam, M., esmail, n., «Yield Stress Behavior for Crude oil-polymer emulsions, Journal of petroleum Science and engineering», 47, 3-4, 105-115, 2005.
abdelgawad, M., Hassan, I., esmail, n., «transcient Behavior of the Viscous Micropump», Microscale thermophysical eng., 8, 4, 361-381, 2004.
ahmed, M., Hassan, I., esmail, n., «theoretical analysis of the onset of Gas entrainment from a Stratified Region through a Single Side-oriented Branch at Moderate Froude numbers», Can. J. Chem. eng., 82, 6, 1175-1182, 2004.
ahmed, M., Hassan, I., esmail, n., «the onset of Gas pull-through During Dual Discharge from a Stratified two-phase Region: theoretical analysis», physics of Fluids, 16, 9, 3385-3392, 2004.
el-Sadi, H., esmail, n., «on the application of Yellowing Inhibitors to paper-Coating: Viscosity, Microstructure and numerical Simulation», nihon Reoroji Gakkaishi, 32, 2, 97-104, 2004.
Shirazi, M., esmail, n., Garnier, G., Van de Ven, tGM, «Starch penetration into paper in a Size press», J. Dispersion Sci. & tech., 25, 4, 457-468, 2004.
Bhadane, p., Virgilio, n., Favis, B.D., Champagne, M.F., Huneault, M.a., tofan, F., «effect of Dynamic Vulcanization on Co-Continuous Morphology», aIChe J., 52, 341, 2006.
Roy, X., Sarazin, p., Favis, B.D., «ultra-porous nanosheath Materials by layer-by-layer Deposition onto Co-Continuous polymer Blend templates», advanced Materials, 18, 1015, 2006.
Sarazin p., Virgilio, n., Favis, B.D., «Influence of the porous Morphology on the In-Vitro Degradation and Mechanical properties of poly(l-lactide) Disks», J. of appl. polym. Sci., 100, 1039, 2006.
Yuan, Z., Favis, B.D., «Influence of the efficacy of Interfacial Modification on the Coarsening of Co-Continuous pS/HDpe Blends During Quiescent annelaing», J. of polym. Sci.; part B: polym. phys., 44, 711, 2006.
Sarazin, p., Favis, B.D., «Influence of temperature Induced Coalescence effects on Co-Continuous Morphology in poly (Caprolactone)/polystyrene Blends», polymer, 46, 5966, 2005.
tchomakov, K.p., Favis, B.D., Huneault, M.a., Champagne, M.F., tofan, M.F., «Mechanical properties and Morphology of ternary pp/epDM/pe Blends», Can. J. Chem. eng., 83, 300-309, 2005.
Virgilio, n., Favis, B.D., pépin, M.F., Desjardins, p., l’espérance, G., «High Contrast Imaging of Interphases in ternary polymer polymer Blends using Focused Ion Beam preparation and atomic Force Microscopy», Macromolecules, 38, 2368, 2005.
Yuan, Z., Favis, B.D., «Coarsening of Immiscible Co-Continuous Blends During Quiescent annealing», aIChe J., 51, 271, 2005.
Riscanu, D., Favis, B.D., Feng, C.Y., Matsuura, t., «thin-Film Membranes Derived from Co-Continuous polymer Blends», preparation and performance polymer, 45, 5597, 2004.
Rodriguez, F.J., Ramsay, B.a., Favis, B.D., «Rheological and thermal properties of thermoplastic Starch with High Glycerol Content», Carbohydrate polymers, 58, 139, 2004.
44
CREPEC Rapport annuel 2006-2007 annual Report 45
Sarazin, p., Favis, B.D., «preparation and properties of porous poly(l-lactide) obtained from a Co-Continuous Blend of two Biodegradable polymers, Biomaterials, 25, 5965, 2004.
tchomakov, K.p., Favis, B.D., Huneault, M.a., Champagne, M., tofan, F., «Composite Droplets with Core/Shell Morphologies prepared from HDpe/pS/pMMa ternary Blends by twin-Screw extrusion», polym. eng. Sci., 44, 749-759, 2004.
Yuan, Z., Favis, B.D., «Macroporous poly(l-lactide) of Controlled pore Size Derived from the annealing of Co-Continuous polystyrene/poly(l-lactide) Blends, Biomaterials, 25, 2161, 2004.
el-aghoury, a., Vasudeva, R.K., Banu, D., elektorowicz, M., Feldman, D., «Contribution to the Study of Fungal attack on Some plasticized Vinyl Formulations» J. polymers and the environment, 14, 2006.
Feldman, D., Banu, D., «Determination of Microorganisms attack on Some Flexible polymers by using Soil Burial test Method», J. polymer and the environment, 13, 3, 287-292, 2005.
Feldman, D., «polyblendcompatibilization», J. Macromol. Sci. Chem., 42, 5, 587-607, 2004.
Khosravi, p., Ganesan R. Sedaghati, R., «Co-rotational nonlinear analysis of thin plates and Shells using a new Shell element», International Journal for numerical Methods in engineering, 69, 4, 859-885, 2007.
Xu, D., Ganesan, R., Hoa, S.V., «Buckling analysis of triaxial Woven Fabric Composite Structures, part I: non-linear Finite element Formulation», J. of Composite Struct., 72, 236-253, 2006.
Ganesan, R., Kowda, V.K., «Free-Vibration of Composite Beam-Columns With Stochastic Material and Geometric properties Subjected to Random axial loads», Journal of Reinforced plastics and Composites, 24, 69-91, 2005.
Ganesan, R., Kowda, V.K., «Buckling of Composite Beam-Columns With Stochastic properties», Journal of Reinforced plastics and Composites, 24, 513-543, 2005.
Xu, D., Ganesan, R., Hoa, S.V., «Buckling analysis of tri-axial Woven Fabric Composite Structures. part I: nonlinear Finite element Formulation», Journal of Composite Structures, 67, 37-55, 2005.
Ganesan, R., Zhang, D., «progressive failure analysis of composite laminates subjected to in-plane compressive and shear loadings», Science and engineering of Composite Materials, 11, 79-102, 2004.
He K., Ganesan R. Hoa S.V., «Interlaminar stress and delamination analysis of internally tapered composite laminates», J. Reinforced plastics & Composites, 23, 7, 707-727, 2004.
Zhang, X., Rakheja, S., Ganesan, R., «Modal analysis of a truck tyre using Fe tyre Model», Int. J. of Heavy Vehicle Systems, a Special Series, Int. J. of Vehicle Design, 11, 2, 2-23, 2004.
Zmievski, V., Grmela, M., Bousmina, M., «Suspensions of rigid spherical particles in polymeric solutions», physica a: Statistical and theoretical physics, 376, 51-74, 2007.
Jou, D., Casa-Vazquez, J., lebon, G., Grmela, M., «a phenomenological Scaling approach for Heat transport in nanosystems», applied Mathematics Reviews, 18, 963-967, 2005.
Grmela, M., lebon, G., Dauby, p.C., Bousmina, M., «Ballistic-Diffusive Heat Conduction at nanoscale: GeneRIC approach» phys. letters, a-339, 237-245, 2005.
Zmievski, V., Grmela, M., Bousmina, M., Dagréau, S., «nonlinear Microstructure and Rheology of Semidilute Colloidal Suspensions of Structureless particles», phys. Rev.e., 71, 51503-18, 2005. Deiva Venkatesh, R., Grmela, M., Chaouki, J., «Improvement of Fluidizability of Fine powders», China particuology, 3, 16-22, 2005.
Grmela, M., «Geometry of Mesoscopic Dynamics and thermodynamics», J. non-newt. Fluid Mech., 120, 137-149, 2004.
Grmela, M., Jou, D., Casas-Vazquez, J., lebon, G., Bousmina, M., «ensemble averaging in turbulence Modelling», physics letters a, 330, 54-64, 2004.
Cho, J., Heuzey, M.C., Bégin, a., Carreau, p.J., «physicochemical and Rheological Characterization of Chitosan Solutions in Dilute and Concentrated Regimes», J. Food eng., 74, 500-515, 2006.
Cho, J., Heuzey, M.C., Bégin, a., Carreau, p.J. «effect of urea on Solution Behavior and Heat-induced Gelation of Chitosan-$-glycerophosphate», Carbohydrate polymers, 63, 507-518, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Cho, J., Heuzey, M.C., Bégin, a., Carreau, p.J. «physical Gelation of Chitosan in the presence of ß−Glycerophosphate: the effect of temperature», Biomacromolecules, 6, 6, 3267-3275, 2005.
Hamdine, M., Heuzey, M.C., Bégin, a., «effect of organic and Inorganic acids on Concentrated Chitosan Solutions and Gels», Int. J. of Biological Molecules, 37, 3, 134-142, 2005.
Hamdine, M., Heuzey, M.C., Bégin, a., «Viscoelastic properties of phosphoric and oxalic acid-Base Chitosan Hydrogels», Rheol. acta, 37, 1-17, 2005.
Chen, X., Heuzey, M.C., Carreau, p.J., «Rheological properties of Injection Molded lDpe and mpe Foams», polym. eng. Sci., 44, 11, 2158-2164, 2004.
Heuzey, M.C., Wood-adams, p.M., Sekki, D., «Simplified theory for linear Rheology of Monodisperse linear polymers», J. applied polymer Science, 94, 2, 569-586, 2004.
lebel, l., Hoa, S.V., «Manufacturing of Braided thermoplastic Composites with Carbon/nylon Commingled Fibers», J. Composite Materials, 41, 9, 2007.
Zhao, Q., Hoa, S.V., «toughening Mechanism of epoxy Resins with Micro/nano particles», J. Composite Materials, 41, 2, 201-220, 2007.
Wu, l., Hoa, S.V., Wang, H., «Improvement of Flammability Resistance of epoxy adhesives used in Infrastructure applications», Canadian journal of Civil engineering, 34, 323-330, 2007.
Jiang, Y., Hoa, S.V., «a novel Method for the Manufacturing of thick Composites», Journal of Composite Materials, 40, 5, 433-454, 2006.
lei, S.G., Hoa, S.V., ton-that, M.t., «effect of Clay type on the processing and properties of polypropylene nanocomposites», J. Composites Science and technology, 66, 10, 1274-1279, 2006.
Wang, H., Hoa, S.V., Wood-adams, p., «new Method for the Synthesis of Clay/epoxy nanocomposites», J. applied polymer Science, 100, 6, 4286-4296, 2006.
Wu, l., Hoa, S.V., ton-that, M.t., «effects of Composition of Hardener on the Curing and aging for an epoxy Resin System», J. applied polymer Science, 99, 2, 580, 2006.
liu, W., Hoa, S.V., pugh, M., «organoclay-Modified High performance epoxy nanocomposites», J. Comp. Sci. & tech., 65, 307-316, 2005.
Wu, l., Hoa, S.V., ton-that, M.t., «effects of Water on the Curing and properties of epoxy adhesive used for Bonding Composite Sheet to Concrete», J. applied polymer Science, 93, 2261-2268, 2004.
He, K., Hoa, S.V., Ganesan, R., «Stress analysis of tapered Composite laminates using partial Hybrid Finite elements», J. Reinforced plastics and Composites», 23, 589-599, 2004.
Hojjati, M., Johnston, a., Hoa, S.V., Denault, J. «Viscoelastic Behavior of Cytec FM73 adhesive During Cure”, J. applied polymer Science, 91, 2548-2557, 2004.
liu, W., Hoa, S.V., pugh, M., «Morphology and performance of epoxy nanocomposites Modified with organoclay and Rubber», polym. eng. Sci., 44, 6, 1178-1186, 2004.
Haider, M., Hubert, p., lessard, l., «Cure Shrinkage Characterization and Modeling of a polyester Resin Containing low profile additives», Composites part a, 38, 994-1009, 2007.
ashrafi, B., Hubert, p., «Modeling the elastic properties of Carbon nanotube array/polymer Composites», J. Comp. Sci. and tech., 66, 3-4, 387-396, 2006.
ashrafi, B., Hubert, p., Vengallatore, S., «Carbon nanotube-Reinforced Composites as Structural Materials for Microactuators in Microelectromechanical Systems (MeMS)», nanotechnology, 17, 4895-4903, 2006.
pipes, R.B., Hubert, p., Salvetat, J.p., Zalamea, l., «Flexural Deflection as a Measure of Van Der Waals Interactions Forces in the nCt array», J. Comp. Sci. and tech., 66, 1122-1128, 2006.
odegard, G.M., Hubert, p., pipes, R.B., Gates, t.S., «Comparison of two Models of SWCn polymer Composites», Journal of Composites Science and technology, 64, 7-8, 1011-1020, 2004.
Bhadane, p., Champagne, M.F., Huneault, M.a., Favis, B.D., tofan, F., «erosion-Dependant Continuity Development in High Viscosity Ratio Blends of Very low Interfacial tension», Journal of polymer Science part B-polymer physics, 44, 14, 1919-1929, 2006
46
CREPEC Rapport annuel 2006-2007 annual Report 47
Bhadane, p., Champagne, M.F., Huneault, M.a., Favis, B.D., tofan, F., «Continuity Development in polymer Blends of Very low Interfacial tension», polymer, 47, 8, 2760-2771, 2006.
Mokrini, a., Huneault, M.a., «proton exchange Membranes Based on pVDF/SeBS Blends». J. power Sources, 154, 51-58, 2006.
Mokrini, a., Huneault, M.a., Gerard, p., «partially Fluorinated proton exchange Membranes Based on pVDF–SeBS Blends Compatibilized with Methylmethacrylate Block Copolymers», Journal of Membrane Science, 283, 74–83, 2006.
Reignier, J., Huneault, M.a., «preparation of Interconnected poly(e-caprolactone) porous Scaffolds by a Combination of polymer and Salt particulate leaching, polymer, 47, 4703-4717, 2006.
elkoun, S., Huneault, M a., McCormick, K., puterbaugh, F., Kale, l., «llDpe-Based Mono- and Multilayer Blown Films: property enhancement through Coextrusion», polymer engineering and Science, 45 , 9, 2005.
elkoun, S., Huneault, M a., McCormick, K., puterbaugh, F., Kale, l., «llDpe-Based Mono- and Multilayer Blown Films: effect of processing parameters on properties», polymer engineering and Science, 45 , 9 , 1214, 2005.
pesneau, I., Champagne, M.F., Huneault, M.a., «GMa Grafted llDpe Fabrication and application for polyester/polyethylene Bonding», Journal of applied polymer Science, 91, 5, 3180-3191, 2004.
Chen, J., Kahrizi, M., «new Design for Indentation Measurement using Fiber Bragg Grating», JVSt, 24, 6, 2159-2163, 2006.
Dargahi, J., Kahrizi, M., purushotham, n., Solchanvar, S., «Design and Microfabrication of a Hybrid piezoelectric-Capacitive tactile Sensor», 26, 3, 186-192, 2006.
tcherniavski, I., Kahrizi, M., «Influence of the Random Image aligmnent and optical path Différence errors of a Beam Combination System on the otF of the opticaSparse array», in press, 2006.
Fan, Y., Kahrizi, M., «Characterization of a FBG strain gage array embedded in composite structure», Sensors and actuators a, 121, 297-305, 2005.
Stateikina, I., landsberger, l.M., Kahrizi, M., Hoque, n., Rossokhaty, V., «Silicon Wet etch anisotropy: analysis of the Impact of {111}-, {110}-, {100}- terrace Widths», Journal of Sensors and Materials, 17/4, 199-210, 2005.
tcherniavski, I., Kahrizi, M., «optimization of the optical Sparse array Configuration», J. optical engineering, 44, 10, 1-9, 2005.
Stateikina, I., landsberger, l.M., Kahrizi, M., elalamy, Z., analysis of Step-Based Silicon Surfaces at Facet Bonndaries During Wet anisotropic etching», J. Vac. Sci. technol. a, 22, 3, 1073-1078, 2004.
Zhang, B., Kahrzi, M., «High-temperature Bragg Grating Waveguide Sensor», Sensor letters, 2, 2, 113-116, 2004.
Borse, n.K., Kamal, M., «Melt processing effects on the Structure and Mechanical properties of pa-6/Clay nanocomposites», polymer engineering and Science, 46, 1094-1103, 2006.
Feng, l., Kamal, M., «Melting temperature Characteristics for polyethylenes from Crystal Size Distribution», International polymer processing, XXI, 4, 402-421, 2006.
Gupta, R.K., prasad, R., Chaudhary, D.S., Kamal, M., Bhattacharya, S.n., «Morphological and Mechanical Characterisation of HDpe-eVa nanocomposites», Journal of polymer engineering, 26, 8-9, 805-820, 2006.
Mollet, V.a., Kamal, M., «Quantitative Characterization of exfoliation in polyamide-6/layered Silicate nanocomposites», Journal of polymer engineering, 26, 8-9, 757-782, 2006.
tavichai, o., Feng, l., Kamal, M., «Crystalline Spherulitic Growth Kinetics during Shear for linear low-Density polyethylene», polymer engineering & Science, 48, 10, 1468-1475, 2006.
alam, K., Kamal, M.R., «a Robust optimization of Injection Molding Runner Balancing», Comp. app. Chem. eng. (CaCe), 29, 9, 1934-1944, 2005.
Capt, l., Rettenberger, S., Münstedt, H., Kamal, M.R., «Simultaneous Biaxial Stretching of polypropylene Resins of Varying tacticity II – Film Morphology and properties», Inter. polym. proc., 20, 4, 369-379, 2005.
CREPEC Rapport annuel 2006-2007 annual Report
Feng, l., Kamal, M.R., «Crystallization and Melting Behavior of Homogeneous and Heterogeneous linear low-Density polyethylene Resins», polym. eng. & Sci., 45, 8, 1140-1151, 2005.
Kamal, M.R., Feng, l., «non-linear Crystalline Spherulitic Growth Behavior for llDpe», Int. polym. proc., 20, 1, 78-85, 2005.
nassar, n., utracki, l.a., Kamal, M.R., «Melt Intercalation in Montmorillonite/polystyrene nanocomposites», Inter. polym. proc., 20, 4, 423-431, 2005.
alam, K., Kamal, M.R., «Runner Balancing by a Direct Genetic optimization of Shrinkage», polym. eng. & Sci., 44, 10, 1949-1959, 2004.
Feng, l., Kamal, M.R., «Distributions of Crystal size from DSC Melting traces for polyethylenes», Canadian J. for Chem. eng., 82, 4,1239-1251, 2004.
Kim, K., utracki, l.a., Kamal, M.R., «numerical Simulation of polymer nanocomposites using Self-Consistent Mean-Field Model», J. Chemical physics, 121, 21, 10766-10777, 2004.
Mehrabzadeh, M., Kamal, M.R., «Melt processing of pa-66/Clay HDpe/Clay and HDpe/pa66/Clay», polym. eng. Sci., 44, 5, 152-1161, 2004.
Muslet, I.., Kamal, M.R., «Computer Simulation ff the Film Blowing process Incorporating Crystallization and Viscoelasticity», J. Rheo., 48, 3, 525-550, 2004.
Yong, G.C., Kamal, M.R., «estimation of Stress for Separation of platelets by Melt processing», polym. eng. Sci., 4, 6, 1187-1195, 2004.
Zhao, l., Capt, l., Kamal, M.R., Choi, p. , «on the use of pressure-Volume-temperature Data of polyethylene liquids for the Detennination of their Solubility and Interaction parameters», polym. eng. Sci., 44, 5, 853-860, 2004.
Gheorghiu, C., labossière, p., proulx, J., «Response of CFRp-Strengthened Beams under Fatigue with Different load amplitudes», Construction and Building Materials, 21, 756-763, 2006.
Gheorghiu, C., labossière, p., proulx, J., «Fatigue and Monotonic Strength of RC Beams Strengthened with CFRps», Composites part a, 37, 1111-1118, 2006.
Gheorghiu, C., Rhazi, J., labossière, p., «Impact resonance method for fatigue damage detection in RC beams with CFRp», Canadian Journal of Civil engineering, 32, 6, 1093-1102, 2006.
Gheorghiu, C., labossière, p., Raîche, a., «environmental Fatigue and Static Behaviour of RC Beams Strengthened with CFRp», aSCe Journal of Composites for Construction, 8, 3, 211-218, 2004.
Zhang, Z., lafleur, p.G., Bertrand, F., «effect of aerodynamics on Film Blowing process», Int. polym. proc., 5, 527-535, 2006.
Gamache, e., agassant, J.F., Demay, Y., lafleur, p.G., «evaluation of Stresses in a two-layer Coextruded lDpe Melt Blown Film», J. of plastic Film and Sheeting, 21, 127-144, 2005.
Kim, S, Fang, Y., lafleur, p.G., Carreau, p.J., «Dynamics and Criteria for Bubble Instabilities in a Single layer Film Blowing extrusion», polym. eng. Sci., 44, 2, 283-302, 2004.
lozano, t., lafleur, p.G., Grmela, M., thibodeau, C., «effect of Filler Dispersion on polypropylene Morphology», polym. eng. Sci., 44, 5, 880-891, 2004.
Hosseinzadeh, R., Shokrieh, M., lessard, l., «Damage Behavior of Fiber Reinforced Composite plates subjected to Drop Weight Impacts», Composite Science and technology, 66, 1, 61-68, 2006.
Hosseinzadeh, R., Shokrieh, M., lessard, l., «parametric Study of automotive Composite Bumper Beams Subjected to low-Velocity Impacts», Composites Structures, 68, 419-427, 2005.
Shokrieh, M., Hasani, a., lessard, l., «Shear Buckling of a Composite Drive Shaft under torsion», Composites Structures, 64, 63-69, 2004.
o’Dowd, F., lévesque, M., Gilchris, M. et M.D., «analysis of Fibre orientation effects on Injection Moulded Components», Journal of engineering Manufacture, 220, 1909 – 1921, 2006.
lévesque, M., Derrien, K., Mishnaevsky Jr l., Baptiste, D., Gilchrist, M. et M.D., «a Micromechanical Model for nonlinear Viscoelastic particle Reinforced polymeric Composite Materials undamaged State», Composites part a: applied Science and Manufacturing, 35, 7–8, 905–913, 2004.
Morton, K., Graffe, a., Maric, M., «nitroxide Mediated Synthesis of Hydroxyl terminated poly(styrene-random-vinylcarbazole) Copolymers», Macromol. Chem. phys., 208, 496-503, 2007.
48
CREPEC Rapport annuel 2006-2007 annual Report 49
Burong, Z., Masmoudi, R., Benmokrane, B., «new Method for testing Fiber-reinforced polymer Rods under Flexure», aStM Journal of testing and evaluation, 35, 2, 6, 2006.
Masmoudi, R., Zaidi, a., Girard, p., «transverse thermal expansion of FRp Bars embedded in Concrete», aCSe Journal of Composites for Construction, 9, 5, 377-387, 2005.
Burong, Z., Masmoudi, R., Benmokrane, B., «Behaviour of one-Way Concrete Slabs Reinforced with CFRp Grid Reinforcements», Journal of Construction and Building Materials, 18, 625-635, 2004.
Janz, a., Gröbner, J., Mirkovic, D., Medraj, M., Chang, Y.a., Schmid-Fetzer, R., «experimental investigation and thermodynamic calculation of al-Mg-Sr phase equilibria», Journal of Intermetallics, 15, 4, 506-519, 2007.
al Shakhshir, S., Medraj, M., «thermodynamic assessment of the Mg-al-Y System», Journal of phase equilibria and Diffusion, 27, 3, 231-244, 2006.
aljarrah, M., aghaulor, u., Medraj, M., «thermo-dynamic Modeling of the Mg-Zn-Sr System», J. of Intermetallics, 15, 2, 93-97, 2007.
arafin, M.a., Medraj, M., turner, D.p., Bocher, p., «Mathematical Modeling and experimental Investigations of Isothermal Solidification During transient liquid phase Bonding of nickel Superalloys», Journal of advanced Materials Research, 17, 882-887, 2006.
Islam, F., thykadaril, a., Medraj, M., «a Computational thermodynamic Model of the Mg-al-Ge System», J. of alloys and Compounds, 425, 1-2, 129-139, 2006.
Medraj, M., Hammond, R., Drew, R.a.l., thompson, W.t., parvez, M.a., «High temperature neutron Diffraction Study of the al2o3-Y2o3 System», J. of the european Ceramic Society, 26, 16, 3515-3524, 2006.
Medraj, M., parvez, M.a., essadiqi, e., li, J., «new phases in the Mg-al-Sr System», Journal of Materials Science Forum, 539-543, 1620-1625, 2006.
uremovich, D., Islam, F., Medraj, M., «thermodynamic Modeling of the Ca-ni System», J. of the Science and technology of advanced Materials, 7, 1, 116-126, 2006.
Balakumar, t., Medraj, M., «thermodynamic Modeling of the Mg-al-Sb System», CalpHaD (Computer Coupling of phase Diagrams and thermochemistry), 29, 1, 24–36, 2005.
Islam, F., Medraj, M., «thermodynamic assessment of the Mg-ni-Ca System», CalpHaD (Computer Coupling of phase Diagrams and thermochemistry), 49, 4, 289-302, 2005.
Islam, F., Medraj, M., «thermodynamic evaluation and optimization of the Mg-al-Ca System», J. Canadian Metallurgy Quarterly, 44, 4, 523-535, 2005.
Medraj, M., thompson, W.t., Drew, R.a.l., «understanding aln Sintering through Computational thermodynamics Combined with experimental Investigation». J. Materials processing technology, 161, 3, 415-422, 2005.
parvez, M.a., Medraj, M., essadiqi, e., Muntasar, a., Dénès, G., «experimental study of the ternary magnesium-aluminum-strontium system», J. alloys and Compounds, 402, 1-2, 170-185, 2005.
Medraj, M., Drew, R.a.l., «the Role of the phase equilibria in a1n-al2o3-Y2o3 System on understanding a1n Sintering», J. Silicates Industriels, 69, 5-8, 2004.
Fang, H., Mighri, F., ajji, a., «Fluorescence Quenching of phenanthrene and anthracene by Maleic anhydride and n-octadecenylsuccinic anhydride in Solution and in Bulk polypropylene», polymer engineering and Science, 47, 192-199, 2007.
Mighri, F., Huneault, M.a., «In-situ Visualization of Drop Deformation, erosion, and Breakup in High viscosity Ratio polymeric Systems under High Shearing Stress Conditions», J. applied polymer Science, 100, 4, 2582-2591, 2006.
Yakisir, D., Mighri, F., Bousmina, M., «electronic Conductive Microporous polymer Based structures», Macromol. Rapid Comm., 27, 1596-1602, 2006.
levesque, R., Vaudreuil, S., Mighri, F., Bousmina, M., «thermal activated non-Reversible Response of polystyrene/polyvinyl Methyl ether (pS/pVMe) Sandwich Sample under Small-amplitude oscillatory Shear Flow», J. polymer engineering, 25, 6, 487-499, 2005.
CREPEC Rapport annuel 2006-2007 annual Report
lin, B., Sundararaj, u., Mighri, F., Huneault, M.a., «effect of pre-Made Compatibilizer and Reactive polymers on polystyrene Drop Deformation and Breakup in Simple Shear», Macromolecules, 38, 13, 5609-5616, 2005.
Mighri, F., Huneault, M.a., Champagne, M.F., «Conductive polymer Blends for Injection-Molded Bipolar plates», polym. eng. Sci., 44, 1755-1765, 2004.
Beausir, B., toth, l.S., neale, K.W., «Role of Strain Rate Sensitivity in the Crystal plasticity of Hexagonal Structures», International Journal of plasticity, 23, 227−243, 2007.
neale, K.W., ebead, u.a., abdel Baky, H.M., elsayed, W.e., Godat, a., «analysis of the load–Deformation Behaviour and Debonding for FRp-Strengthened Concrete Structures», advances in Structural engineering, 9, 751−763, 2007.
Wu, p.D., lloyd, D.J., Jain, M., neale, K.W., Huang, Y., «effects of Spatial orientation Distribution and Initial Surface topology on Sheet Metal necking», International Journal of plasticiy, 23, 1084–1104, 2007.
Berthet, J.-F., Ferrier, e., Hamelin, p., al Chami, G., thériault, M., neale, K.W., «Modelling of the Creep Behaviour of Confined Short Concrete Columns under Compressive loading», Materials and Structures, RIleM, 39, 53-62, 2006.
Deniaud, C., neale, K.W., «an assessment of Constitutive Models for Concrete Columns Confined With Fibre Composite Sheets», Composite Structures, 73, 318–330, 2006.
Huffman, S., Bagchi, a., Mufti, a., neale, K.W., Sargent, D., Rivera, e., GFRp Seismic Strengthening and Structural Health Monitoring of portage Creek Bridge Concrete Columns», arabian Journal for Science and engineering, 31, 25−42, 2006.
Inal, K., neale, K.W., Hamelin, C.J., pilkey, a.K., Diak, B.J., «numerical and experimental Investigation of Strain-path effects on localized Deformation in Steel alloys», Sae 2005 transactions Journal of Materials and Manufacturing, 1−5, 2006.
abourajeddine, a., neale, K.W., «the Double-Inclusion Model: a new Formulation and new estimates», Mechanics of Materials, 37, 331-341, 2005.
Deniaud, C., neale, K.W., «an assessment of Constitutive Models for Concrete Columns Confined With Fibre Composite Sheets», Composite Structures, 73, 318-330, 2005.
Ferrier, e., Bigaud, D., Biztndavyt, l., neale, K.W., «Fatigue of CFRps externally Bonded to Concrete», Materials and Structures, RIleM, 38, 39-46, 2005.
Inal, K., neale, K.W., abourajeddtne, a., «Forming limit Comparisons for FCC and BCC Sheets», Int. J. of plasticity, 21, 1255-1266, 2005.
Inal, K., neale, K.W., Hamelin, C.J., pilkey, a.K., Diakm B.J., «numerical and experimental Investigation of Strain-path effects on localized Defonnation in Steel alloys», Sae 2005 trans. J. Mat. & Man., 2005-o1-0081, 1-5, 2005.
neale, K.W., labossière, p., Demers, M., «FRp protection and Rehabilitation of Corrosion Damaged Reinforced Concrete Columns», Int. J. of Mat. & prod. tech., 23, 348-371, 2005.
Wu, p.D., Graf, a., Macewen, S.R., lloyd, D.J., Jain, M., neale, K.W., «on Forming limit Stress Diagram analysis», Int. J. of Solids and Stuct., 42, 2225-2241, 2005.
Wu, p.D., Macewen, S.R., lloyd, D.J., Jain, M., tugcu, p., neale, K.W., on pre-Straining and the evolution of Material anisotropy in Sheet Metals», Int. J. of plasticity, 21, 723-739, 2005.
Wu, p.D., Macewen, S.R., lloyd, D.J., neale, K.W., «a Mesoscopic approach for predicting Sheet Metal Fonnability», Mod. & Sim. in Mat. Sci. & eng., 12, 511-527, 2005.
thériault, M., neale, K.W., Claude, S., «FRp-Confined Circular Concrete Columns: Investigation of Size and Slenderness effects», J. of Comp. for Construction, aSCe, 8, 323-331, 2005.
Green, D.e., neale, K.W., Makinde, a., Macewen, S.R., perrin, R., «experimental Investigation of the Biaxial Behaviour of an aluminum Sheet», International Journal of plasticity, 20, 1677-1706, 2004.
tugcu, p., neale, K.W., Wu. p.D., Inal, K., «Crystal plasticity Simulation of the Hydrostatic Bulge test», International Journal of plasticity, 20, 1603-1653, 2004.
50
CREPEC Rapport annuel 2006-2007 annual Report 51
Wu, p.D., Macewen, S.R., lloyd, D.J., neale, K.W., «effect of Cube texture on Sheet Metal Formability», Materials Science and engineering, a364, 182-187, 2004.
Brochu, M.D., pugh, M.D., Drew, R.a.l., «Fabrication of a Composite powder and its applications as an active Brazing alloy», J. Material, Sci,, 40, 1485-1493, 2005.
Brochu, M.D., Demers, H., Gauvin, R., pugh, M.D., Drew, R.a.l., «Determination of e2 for nitride Ceramics using Fe-SeM and the Duane-Hunt limit procedure», Microscopy & Microanalysis, 11, 56-65, 2005.
Brochu, M., pugh, M.D., Drew, R.a.l., «Brazing Silicon nitride to an Iron-Based Intermetallic using a Copper Interlayer», Ceramics International, 30, 901-910, 2004.
Brochu, M., pugh, M.D., Drew, R.a.l., «ptlB of Si3n4 to Fa-129 using nickel as a Core Interlayer». Int. J. Refractory Met. & Hard Mat., 22, 95-103, 2004.
Brochu, M., pugh, M.D., Drew, R.a.l., «Wetting Behaviour of Copper on an Iron aluminide alloy», Intermetallics, 12, 289-294, 2004.
Brochu, M., pugh, M.D., Drew, R.a.l., «Interfacial Microstructure Characterisation of Molten Cu-ti and an Iron-Based aluminide», Journal of alloys and compounds, 366, 171-181, 2004.
Brochu, M., pugh, M.D., Drew, R.a.l., «Joining Silicon nitride Ceramic using a Composite powder as active Brazing alloy», Material science and engineering a., 374, 34-42, 2004.
Brochu, M., Corbin, S.F., pugh, M.D., Drew, R.a.l., «assessment of Melting Behavior of Cu-Coated ti powders using thermal analysis». Material science and engineering a, a369, 56-65, 2004.
Ruiz, e., trochu, F., «Multi-Criteria thermal optimi-zation in liquid Composite Molding to Reduce processing Stresses and Cycle time», Composites part a, Special Issue FpCM-7, sous presse, 2006.
Ruiz, e., achim, V., Soukane, S., trochu, F., Bréard, J., «optimization of Injection Flow Rate to Minimize Micro/Macro Voids Formation in Resin transfer Molded Composites», Composites Science and technology, 66, 3-4, 475-486, 2006.
Ruiz, e., Demaria, C., trochu, F., «polymer Freeware for preform permeability Characterization», JeC Composites, 17, 70, 2005.
Ruiz, e., trochu, F., «numerical analysis of Cure temperature and Internal Stresses in thin and thick RtM parts», Composites part a, 36, 6, 806-826, 2005.
Ruiz, e., trochu, F., «thermo-Mechanical properties during Cure of Glass-polyester RtM Composites: elastic and Visco-elastic Modeling», J. Comp. Mat., 39, 10, 881-916, 2005.
Ruiz, e., trochu, F., «Comprehensive thermal optimi-zation of liquid Composite Molding to Reduce Cycle time and processing Stresses», polymer Composites, 26, 2, 209-230, 2005.
Soukane, S., Ruiz, e., trochu, F., «a novel approach to Reduce Computational time during Simulations of Resin transfer Molding», Revue europ, éléments finis, 14, 6-7, 819-840, 2005.
Béchet, e., Ruiz, e., trochu, F., Cuillière, J.C., «Re-meshing algorithms applied to Mould Filling Simulations in Resin transfer Moulding», J. of Reinf. plast. & Comp., 23, 1, 17-36, 2004.
Ruiz, e., achim, V., Soukane, S., trochu, F., «numerical Simulation of liquid Composite Molding», JeC Composites, 8, 147-149, 2004.
Ruiz, e., trochu, F., Gauvin, R., «Internal Stresses and Warpage of thin Composite parts Manufactured by RtM», advanced Composite letters, 13, 1, 49-57, 2004.
pommerleau, J., Sanschagrin, B., «Injection Molding Shrinkage of pp: experimental progress», polym. eng. Sci., 46, 9, 2006.
ait-Messaoud, D., Sanschagrin, B., Derdouri, a., «Study on Mechanical properties and Material Distribution of Sandwich plaques Molded by Co-Injection», polym. Comp., 26, 3, 265-275, 2004.
Khosravi, p., Sedaghati, R. Ganesan, R., «optimization of Geometrically nonlinear thin Shells Subject to Displacement and Stability Constraints», aIaa Journal, 45, 3, 684-692, 2007.
Sattari, H., Sedaghati, R., Ganesan, R., «analysis and Design optimization of Deep Drawing process-part II: optimization», Journal of Materials processing technology, 184, 84-92, 2007.
Dominguez, a., Sedaghati, R., Stiharu, I., «a new Dynamic Hysteresis Model for the Magnetorheological Dampers», International Journal of Smart Materials and Structures, 15, 5, 1179-1189, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Dominguez, a., Stiharu, I., Sedaghati, R., «practical Design optimization of truss Structures using the Genetic algorithms», International Journal of Research in Design, 17, 2, 73-84, 2006.
Dominguez, a., Sedaghati, R., Stiharu, I., «Semi-active Vibration Control of adaptive Structures using Magnetorheological Dampers», aIaa Journal, 44, 7, 1563-1571, 2006.
Soucy, Y., Rao, V., Sedaghati, R., «analytical and experimental Investigations of the Semi-empirical Method for Force limited Vibration», aIaa Journal of Spacecraft and Rockets, 43, 4, 866-876, 2006.
Younesian, D., esmailzadeh, e., Sedaghati, R., «passive Control of Vibration of Beams Subjected to Random excitations with peaked pSD», J. Vibration and Control (JVC), 12, 9, 941-953, 2006.
Younesian, D., esmailzadeh, e., Sedaghati, R., «asymptotic Solutions and Stability analysis for Generalized non-Homogeneous Mathieu equation», Communications in nonlinear Science and numerical Simulation, 12, 1, 58-71, 2006.
esmailzadeh, e., Younesian, D., Sedaghati, R., «existence of periodic Solutions for the Generalized form of Mathieu equation», International Journal of nonlinear Dynamics, 39, 4, 335-348, 2005.
li, J., Sedaghati, R., Dargahi, J., Waechter, D., «Design and Development of a new piezoelectric linear Inchworm actuator For adaptive truss Structures», J. Mechatronics, 15, 651-681, 2005.
Modaressi-tehrani, K., Rakheja, S., Sedaghati, R., «analysis of overturning Moment Caused by transient liquid Slosh inside a partly-Filled Moving tank», Institution of Mechanical engineers (I.Mech.e), Journal of automobile engineering-part D, 220, 1-13, 2005.
Sedaghati, R., Dargahi, J., Harpiyar, S., «Design and Modeling of an endoscopic piezoelectric tactile Sensor», International Journal of Solids and Structures, 42, 21-22, 5872-5886, 2005.
Sedaghati, R., «Benchmark Case Studies in Structural Design optimization using the Force Method», International Journal of Solids and Structures, 42, 21-22, 5848-5871, 2005.
Suleman, a., Sedaghati, R., «Benchmark Case Studies in optimization of Geometrically nonlinear Structures», J. Structural and Multidisciplinary optimization, 30, 4, 273-296, 2005.
Cote, a., Sedaghati, R., Soucy, Y., «Force limited Vibration Complex two-Degrees of Freedom System Method», aIaa Journal, 42, 6, 1208-1218, 2004.
Dominguez, a., Sedaghati, R., Stiharu, I., «Modeling the Hysteresis phenomenon of Magnetorheological Dampers», International Journal of Smart Materials and Structures, 13, 6, 1351-1361, 2004.
Sedaghati, R., Suleman, a., «Structural Design optimization of Shallow Frame Structures undergoing large Deflections», aIaa Journal, 42, 12, 2592-2599, 2004.
Yang, F., Sedaghati, R., «optimal placement of active elements in Space truss Structures with Random parameters using Simulated annealing», the Canadian aeronautics and Space Journal (CaSJ), 50, 4, 247-260, 2004.
Shao, Y., Darchis, D., «low temperature response of pultruded composites at saturation», International Journal ofMaterials and product technology, 28, 1/2, 46-65, 2007.
Shao, Y., «Characterization of pultruded Composites for Waterfront Retaining Structures», aSCe Journal of Materials in Civil engineering, 18, 5, 626-633, 2006.
Shao, Y., Shanmugam, J., «Moment Capacity and Deflection limit of pultruded FRp Sheet piles», aSCe Journal of Composites for Construction, 10, 6, 520-528, 2006.
Shao, Y., Shanmugam, J., «Deflection Creep of pultruded Composite Sheet piling», aSCe Journal of Composites for Construction, 8, 5, 471-479, 2004.
Barar pour, S., norca, G., Fradette, l., legros, R., tanguy, p.a., «Solid-liquid and liquid-liquid Mixing laboratory for Chemical engineering undergraduates», Chemical engineering education, 41, 101-106, 2007.
Cabaret, C. Rivera, M., Héniche, M., Fradette, l., tanguy, p.a., «Hydrodynamics performance of a Dual Shaft Mixer with Viscous newtonian liquids», Chem. eng. Res. Des, 85, 1-8, 2007.
Fradette, l., tanguy, p.a., Bertrand, F., thibault, F., Ritz, J.B., Giraud, e., «CFD phenomenological Model of Solid-liquid Mixing in Stirred Vessels», Computers and Chem. eng., 31, 334-345, 2007.
Fradette, l., tanguy, p.a., li, H.Z., Choplin, l., «liquid-liquid Viscous Dispersions with a SMX Static Mixer», Chem. eng. Res. Des., 85, 395-405, 2007.
52
CREPEC Rapport annuel 2006-2007 annual Report 53
Gingras, J.p., Fradette, l., tanguy, p.a., Bousquet, J., «Bitumen-in-Water emulsification using Static», Ind eng. Chem. Res., 46, 2618-2627, 2007.
Gingras, J.p., Fradette, l., tanguy, p.a., Jorda, e., «Concentrated Bitumen-in-water emulsification using Coaxial Mixers», Ind eng. Chem. Res., 46, 18181-1825, 2007.
ascanio, G., Brito-Bazan, M., tanguy, p.a., «a non-Conventional approach for the Makedown of Concentrated Suspensions», Chem. eng. techn., 29, 968-973, 2006.
Barailler, F., Heniche, M., tanguy, p.a., «analysis of a Rotor-Stator Mixer with Viscous Fluids», Chem. eng. Sci, 61, 2888-2894, 2006.
Fouchault, S., ascanio, G., tanguy, p.a., «Mixing times in Coaxial Mixers with newtonian and non-newtonian Fluids», Ind. eng. Chem., 45, 352-359, 2006.
Fradette, l., li, H.Z., Choplin, l., tanguy, p.a., «Gas-liquid Dispersion with a SMX Static Mixer in the laminar Regime», Chem. eng. Sci., 61, 3506-3518, 2006.
Heniche, M., tanguy, p.a., «a new element by element Method for trajectory Calculations with tetrahedral Finite element Meshes», Int. J. num. Meth. eng., 67, 1290-1317, 2006.
ouzineb, K., lord, C., lesauze, n., Graillat, C., tanguy, p.a., McKenna, t., «Homogenization Devices for the production of Miniemulsions», Chem. eng. Sci, 61, 2994-3000, 2006.
Rivera, C., Foucault, S., Heniche, M., espinosa-Solares, t., tanguy, p.a., «Mixing analysis in a Coaxial Mixer», Chem. eng. Sci, 61, 2895-2907, 2006.
arzate, a., tanguy, p.a., «Wetting Contact line Modeling in High-Speed Jet Coating», nordic pulp & paper Research Journal, 20, 217-226, 2005.
arzate, a., tanguy, p.a., «Hydrodynamics of liquid Jet application in high-Speed Jet coating: newtonian and Shear-thining Fluids», Chem. eng. Res. Des., 83, 111-125, 2005.
ascanio, G., Foucault, S., Heniche, M., Rivera, C., tanguy, p.a., «Chaotic Mixing in Stirred Vessels: a new Strategy to enhance Homogeneity», Ingenieria Mecanica: tecno. y Desar., 1, 209-214, 2005.
ascanio, G., tanguy, p.a., «Mixing of Shear-thinning Fluids with Dual off-Centered Impellers», Can. J. Chem. eng., 83, 393-400, 2005.
Doucet, l., ascanio, G., tanguy, p.a., «Hydrodynamics Characterization of Rotor-Stator Mixer with Viscous Fluids», Chem. eng. Res. Des., 83, 1186-1195, 2005.
Foucault, S., ascanio, G., tanguy, p.a., «power characteristics in Coaxial Mixing: newlonian and non-nevv-tonian Fluids», lnd. & eng. Chem. Research, 44, 5036-5043, 2005.
Gentric, C., Mignon, D., Bousquet, J., tanguy, p.a., «Comparison of Mixing in two Industrial Gas-liquid Reactors using CFD Simulations», Chem. eng. Sci., 60, 2253-2272, 2005.
Gingras, J.p., tanguy, p.a., Mariotti, S., Chaverot, p., «effect of process parameters on Bitumen emulsions», Chem. eng. process, 44, 979-986, 2005.
Heniche, M., tanguy, p.a., Reeder, M., Fasano, J., «numerical Investigation of Blade Shape in static Mixing», aIChe J., 51, 44-58, 2005.
tanguy, p.a., Bertrand, J., Xuereb, C., «Innovative Studies in [ndustrial Mixing processes», Chem. eng. Sci., 60, 2099, 2005.
arzate, a., tanguy, p.a., «air entrainment on a Moving Continuous Web» Chem.eng. Sci., 59, 3527-3536, 2004.
arzate, a., Réglat, o., tanguy, p.a., «Determination of In-line process Viscosity using Static Mixers», Flow Measurement and Instrumentation, 15, 77-85, 2004.
ascanio, G., Foucault, S., tanguy, p.a., «time-periodic Mixing of Shear-thinning Fluids», Chem. eng. Res. Des, 82, 1199-1203, 2004.
Foucault, S., ascanio, G., tanguy, p.a., «Coaxial Mixer Hydrodynamics with newtonian and non-newtonian Rheologically Complex Fluids», Chem. eng. techn., 27, 324-330, 2004.
Rivera, C., Heniche, M., ascanio, G., tanguy, p.a., «a Virtual Finite element Model for Centered and eccentric Mixer Configurations», Computers and Chemical engineering, 28, 2459-2468, 2004.
thériault, p., terriault, p., Bralovski, V., Finite element Modeling of a progressivelv expanding Slzape Memory Stent», Journal of Biomechanics, 39, 2837-2844, 2006.
terriault, p., Viens, F., Brailovski, V., «non-Isothermal Finite element Modeling of a Shape Memory alloy actuator using anSYS», Computational Material Science, 36, 397-410, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Isalgue, F., lovey, C., terriault, p., Martorell, R., torra, R.M., torra, V., «SMa for Darnpers in Civil engineering», Materials transactions, 47, 3, 682-690, 2006.
therriault, D., White, S., lewis, J., «Rheological and Structural Behavior of Fugitive Inks for Direct-Write assembly», applied Rheology, 17, 1, 10112-1–10112-8, 2007.
Ghafar-Zadeh, e., Sawan, M., therriault, D., «novel Direct-Write CMoS-based laboratory-on-Chip: Design, assembly and experimental Results», Sensors and actuators a: physical, 134, 1, 27-36, 2006.
therriault, D., Sepherd, R., White, S., lewis, J., Fugitive Inks for Direct-Write assembly of three-Dimensional Microvascular networks», advanced Materials, 17, 395-399, 2005.
ngo t.-D., ton-that M.-t., Hoa S. V., Cole K. C., «Curing Kinetics and Mechanical properties of epoxy nanocomposites Based on Different organoclays», polymer engineering and Science, 47, 649-661, 2007.
Bureau M. n., ton-that M.-t., perrin-Sarazin F., «essential Work of Fracture and Failure Mechanisms of polypropylene-Clay nanocomposites», engineering Fracture Mechanics, 73, 16, 2360-2374, 2006.
lei, S.-G., ton-that, M.-t., Cole, K., Hoa, S.V., pesneau, I., «effect of Clay types on the Formulation and properties of polypropylene nanocomposites», Composites Science and technology, 66, 10, 1274-1279, 2006
li, J., ton-that, M.-t., tsai, S-J., «pp-Based nano-composites with Various Intercalant types and Intercalant Coverages», polym. eng. & Sci., 46, 8, 1060-1068, 2006.
ton-that, M.-t., leelapornpisit, W., perrin-Sarazin, F., utracki, l.a., Denault, J., Cole, K., Bureau M., «effect of Crystallization on Intercalation of Clay-polyolefin nanocomposites and their performance», polym. eng. & Sci., 46, 8, 1085-1093, 2006.
leelapornpisit, W., ton-that, M.-t., perrin-Sarazin, F., Cole, K.C., Bureau, M.n., Denault, J., Simard, B., «properties of nanocomposites Based on polypropylene and Carbon nanotubes», polymer engineering Science: polymer physics, 43, 18, 2445-2453, 2005.
perrin-Sarazin, F., ton-that, M.-t., Bureau, M.n., Denault, J., «Micro-and nano-Structure in polypro-pylene/Clay nanocomposites», polymer, 46, 25, 11624, 2005.
lei, S.-G., ton-that, M.-t., Cole, K.C., Hoa, S.V., pesneau, I., «the Role of Coupling agent in the Formation of polypropylene nanocomposites», Canadian Materials Quarterly, 44, 1, 33-40, 2005.
Bureau, M.n., perrin-Sarazin, F., ton-that, M.-t., «polyolefin nanocomposites: essential Work of Fracture analysis», polym. eng. & Sci., 44, 6, 1142, 2004.
tanoue, S., utracki, l.a., Garcia-Rejon, a., Sammut, p., ton-that, M.-t., pesneau, I., Kamal, M.R, lyngaae-Jørgensen, J. «Melt Compounding of Different Grades polystyrene with organoclay: Rheological properties», polym. eng. & Sci., 44, 6, 1061, 2004.
ton-that M.-t., ngo t.-D., Ding p., Fang G., Cole K. C., Hoa S. V., “epoxy nanocomposites: analysis and Kinetics of Cure”, polymer engineering and Science, 44, 1132-1141 (2004)
ton-that M.t., ngo t.D., Ding p., Fang G., Cole K.C., Hoa S.V., «epoxy nanocomposites: analysis and Kinetics of cure», J. polymer engineering and Science, 44, 6, 1232-1141, 2004.
ton-that, M.t., perrin-Sarazin, F., Cole, K.C., Bureau, M.n., Denault, J., «polyolefin nanocomposites: Formulation and Development», polym. eng. Sci., 44, 7, 1212-1219, 2004.
trochu, F., Ruiz, e., achim, V., Soukane, S., «advanced numerical Simulation of liquid Composite Molding for process analysis and optimization», Special Issue FpCM-7, 37, 6, 890-902, 2006.
Carrier, J., aubin, C.-e., trochu, F., labelle, H., «optimization of Rib Surgery parameters for the Correction of Scoliotic Deformities using approximation Models», J. Biomechanical engineering, 127, 4, 680-691, 2005.
Joubaud, l., achim, V., trochu, F., «numerical Simulation of Resin Infusion and Reinforcement Consolidation under Flexible Cover», polymer Composites, 26, 417-427, 2005.
Soukane, S., trochu, F., «new Remeshing applications in Resin transfer Molding», J. of Reinforced plastics & Composites, 24, 15, 1629-1653, 2005.
54
CREPEC Rapport annuel 2006-2007 annual Report 55
Shojaei, a., trochu, F., Ghaffarian, S.R., Karimian, S.M.H., lessard, l., «an experimental Study of Saturated and unsaturated permeability in Resin transfer Molding», J. Reinforced plastics & Composites, 23, 14, 1515-1536, 2004.
Brochu, M., turenne, S., «experimental Methods for Determining the Densification Function of Metal powder and its Validity», powder Metallurgy, 47, 1, 55-59, 2004.
Said, J., Wenbo, l., Brémand, F., Vu-Khanh, t., «nonlinear Creep Behavior of Viscoelastic polycarbonate», Journal of Materials Science, 41, 531-5368, 2006.
Ha-anh, t., Vu-Khanh, t., «effects of thermal aging on Fracture performance of polychloroprene», Journal of Materials Science, 40, 5243-5248, 2005.
Said, J., Wenbo, l., Brémand, F., Vu-Khanh, t., «application of time–Stress equivalence to nonlinear Creep of polycarbonate», polymer testing, 24, 463–467, 2005.
Vu, t.B.n.,Vu-Khanh. t., lara, J., «effects of Friction on Cutting Resistance of protective Materials», J. thermoplastic Compos. Mater., 18, 23-36, 2005.
Ha-anh, t., Vu-Khanh, t., «thermoxidative aging effects on Mechanical performances of polychloroprene», J. Chinese Institute of engineers, 27, 6, 753-761, 2004.
Ho Huu, C., Vu-Khanh, t., «physical aging and time–temperature behavior concerning fracture performance of polycarbonate», J. theoretical and applied Fracture Mechanics, 41, 103-114, 2004.
nguyen, C.t., Vu-Khanh, t. «Mechanics and Me-chanisms of puncture of elastomer Membranes», J. Materials Science, 39, 7361-7364, 2004.
nguyen,C.t., Vu-Khanh, t., lara, J., «puncture Characterization of Rubber Membranes», J. theoretical and applied Fracture Mechanics, 42, 25–33, 2004.
Xu, W., Wood-adams, p., Robertson, C.G., «Measuring local Viscoelastic properties of Complex Materials with tapping Mode atomic Force Microscopy», polymer, 47, 4798–4810, 2006.
anantawaraskul, S., Soares, J.B.p., Wood-adams, p., «Fractionation of Semicrystalline polymers by Crystallization analysis Fractionation and temperature Rising elution Fractionation», adv. polym. Sci., 182, 1-54, 2005.
anantawaraskul, S., Soares, J.B.p., Wood-adams, p., «Co-Crystallization of Blends of ethylene/1-olefin Copolymers: an Investigation with Crystallization analysis Fractionation (Crystaf)», Macromolecular Chemistry and physics, 205, 6, 771-777, 2004.
anantawaraskul, S., Soares, J.B.p., Wood-adams, p., «an experimental and numerical Study on Crystallization analysis Fractionation (CRYStaF)», Macromol. Symp., 206, 57-68, 2004.
anantawaraskul, S., Soares, J.B.p., Wood-adams, p., «Chemical Composition Distribution of Multicomponent Copolymer Chains”, Macromol. Symp., 206, 69-77, 2004.
He, C., Costeux, S., Wood-adams, p., «a technique to Infer Structural Information for low level long Chain Branched polyethylenes», polymer, 45, 11, 3747-3654, 2004.
He, V.C., Wood-adams, p., Dealy, J.M., «Broad Frequency Range Characterization of Molten polymers», J. Rheol., 48, 4, 711-724, 2004.
liu, n.n., Wood-adams, p., «Simulation of Gel permeation Chromatography Measurement for long Chain Branched Metallocene polyethylenes», Macromol. Symp., 206, 419-431, 2004.
CREPEC Rapport annuel 2006-2007 annual Report
Benmokrane, B., el-Salakawy, e.F., el-Gamal, S., el-Ragaby, a., «use of GFRp Bars as Reinforcement for Concrete Bridge Deck Slabs», 3rd International Conference on FRp Composites in Civil engineering (CICe), Miami, Florida, 2006.
Benmokrane, B., el-Salakawy, e.F., el-Ragaby, a., Wiseman, a., «Rehabilitation of the Structural Slabs of laurier-taché parking Garage (Gatineau, Quebec) using Glass FRp Composite Bars», proceedings on CD-Rom, 1st International Structural Specialty Conference, CSCe, Calgary, alberta, 2006.
eisa, M., el-Salakawy, e.F., Benmokrane, B., «analytical Investigation on new Continuous Reinforced Concrete pavement (CRCp) using GFRp Bars», proceedings on CD-RoM, 1st Int. Structural Specialty Conference, Calgary, alberta, 2006.
eisa, M., el-Salakawy, e.F., Benmokrane, B., «Finite element Model for on new Continuous Reinforced Concrete pavement (CRCp) using GFRp Bars», the 17th IaSteD Int. Conference, Modelling and Simulation, Montreal, Quebec, 2006.
el-Ragaby, a., el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «Static and Fatigue performance of Concrete Bridge Deck Slabs Reinforced with Glass FRp Bars», 7th International Conference on Short & Medium Span Bridges, Montreal, Quebec, 2006.
el-Ragaby, a., el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «performance of Concrete Bridge Deck Slabs Reinforced with Glass FRp Composite Reinforcing Bars», 3rd International Conference on Bridge Maintenance, Safety and Management (IaBMaS’06), porto, portugal, 2006.
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Fatigue performance of Concrete Bridge Deck Slabs Reinforced with Glass FRp Composite Bars», 3rd International Conference on FRp Composites in Civil engineering (CICe), Miami, Florida, December, 2006.
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Fatigue performance of Glass FRp-Reinforced Concrete Bridge Deck Slab», 2nd International Congress of Federation International du Beton (fib), naples, Italy, 2006.
puBlICatIonS comPtes-rendus de conFérences en 2006-2007 conFerence PaPers in 2006-2007
56
ahmed, e., el-Salakawy, e.F., Benmokrane, B., «pullout Strength of post-Installed adhesive anchors using Glass FRp Reinforcing Bars», proceedings on CD-RoM, 2nd International Structural Specialty Conference, CSCe, Yellowknife, northwest territories, 2007.
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Durability of GFRp Reinforced Concrete Bridge Deck Slabs under Fatigue loads», 3rdInternational Conference on Durability & Field applications of Fibre Reinforced polymer (FRp) Composites for Construction, (CDCC-07), Quebec, Canada, 2007.
l-Gamal, S., Benmokrane, B., el-Salakawy, e.F., Cousin, p., Wiseman, a., «Durability and Structural performance of CFRp-RC parking Garage’s Slabs after eight Years in Service Conditions», 3rd International Conference on Durability & Field applications of Fibre Reinforced polymer (FRp) Composites for Construction, (CDCC-07), Quebec, Canada, 2007.
Sharbatdar, M.K., Saatcioglu, M., Benmokrane, B., el-Salakawy, e., «Behaviour of FRp Reinforced Concrete Beam-Column Joints under Cyclic loading», 3rdInternational Conference on Durability & Field applications of Fibre Reinforced polymer (FRp) Composites for Construction, (CDCC-07), May, Quebec, Canada, 2007.
Soliman, S., el-Salakawy, e.F., Benmokrane, B., «Bond properties of near Surface Mounted (nSM) Carbon FRp Bars in Concrete», proceedings on CD-RoM, 2nd International Structural Specialty Conference, CSCe, Yellowknife, northwest territories, 2007.
ahmed, e., el-Salakawy, e.F., Benmokrane, B., «Shear Behaviour of large-Scale neBt Concrete Bridge Girders Reinforced With CFRp Stirrups», 7th International Conference on Short & Medium Span Bridges, Montreal, Quebec, 2006.
ahmed, e., el-Salakawy, e.F., Benmokrane, B., «Bond Characteristics of GFRp post-Installed anchors», 3rd International Conference on FRp Composites in Civil engineering (CICe), Miami, Florida, 2006.
ahmed, e.a., el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Shear Behaviour of large-Scale neBt Concrete Bridge Girders Reinforced With CFRp Stirrups», 7th International Conference on Short & Medium Span Bridges, Montreal, Quebec, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «experimental Investigation on the Fatigue Behaviour of GFRp Reinforced Concrete Bridge Deck Slabs», proceedings on CD-RoM, 1st International Structural Specialty Conference, CSCe, Calgary, alberta, 2006.
el-Sayed, a., el-Salakawy, e.F., Benmokrane, B., «Structural Behaviour of Carbon FRp Stirrups used as Shear Reinforcement for Concrete Beams», proceedings on CD-RoM, 1st International Structural Specialty Conference, CSCe, Calgary, alberta, 2006.
pianet, G., Vidal, D., Bertrand, F., «Investigation of paper Deposition Mechanisms using a Hybrid DeM-lBM Model», paptac annual Meeting, Montreal, Quebec, Canada, 2007.
Devals, C., Fuxman, a., Bertrand, F., Forbes, J.F., Hayes, R.e., «Combustion of lean Methane in a Catalytic Flow Reversal Reactor», CoMSol users Conference, Boston, uSa, 2006.
Doucet, J., Bertrand, F., Chaouki, J., «experimental Characterization of the Chaotic Dynamics of Cohesionless particles in a V-blender using Radioactive particle tracking», 5th World Congress on particle technology, orlando, uSa, 2006.
Doucet, J., Bertrand, F., Hudon, n., Chaouki, J., «Modeling of Granular Mixing using a DeM-Based Markov process Method», aIChe annual Meeting, San Francisco, uSa, 2006.
Doucet, J., Chaouki, J., Bertrand, F., «Determination of Macroscopic Mixing properties of Granular Materials from particle tracking experiments», 56th CSChe Conference, Sherbrooke, Canada, 2006.
lécuyer, H.a., Bertrand, F., tanguy, p.a., Mmbaga, J.p., Hayes, R.e., «Computer Modelling of Deformable non-newtonian Flow using Comsol Multiphysics», CoMSol user Conference, las Vegas, uSa, 2006.
lemieux, M., Bertrand, F., Chaouki, J., Gosselin, p., «experimental and numerical Comparative Study of Cohesionless Granular Mixing in a Bin-Blender and a V-Blender», 5th World Congress on particle technology, orlando, uSa, 2006.
lemieux, M., Chaouki, J., Bertrand, F., «Comparative Study of Cohesionless Granular Mixing in Bin- and V-blenders», 56th CSChe Conference, Sherbrooke, Canada, 2006.
57
navaee-ardeh, S., Bertrand, F., Stuart, p., «one-Dimensional Heat and Mass transfer Modeling of a novel Continuous Biodrying process: physical Modeling and preliminary Results», 56th CSChe Conference, Sherbrooke, Canada, 2006.
pianet, G., Vidal, D., Desaulniers, e., Bertrand, F., «a new Model for the Consolidation of pigments in paper Coating», 56th CSChe Conference, Sherbrooke, Canada, 2006.
Vidal, D., Bertrand, F., «Recent progress and Challenges in the numerical Modeling of Coating Structure Development», tappI 9th advanced Coating Fundamentals Symposium, turku, Finland, 2006.
Baril, Y., Brailovski V., terriault, p., Cartier, R., «Modeling and testing of a new Sternal Closure Device using tubular Mesh-like Superelastic nitinol Structure», proceeding of the Conference SMSt-2006, asilomar, Ca, uSa, 2006.
Brailovski V., prokoshkin, S., Bastarash, e., Demers, V., Inaekyan K., Khemelevskaya, I., «thermal Stability and nanocrystallization of amorphous ti-ni alloys prepared by Cold Rolling and post-Deformation annealing», tHeRMeC’06, Vancouver, Canada, 2006.
Coutu, D., Brailovski V., Demers, V., terriault, p., «the Design Diagram for optimal Shape Memory alloys linear actuators», 10th International Conference on new actuators, Bremen, Germany, 2006.
Masson, p., Micheau, p., pasco, Y., thomas, M., Brailovski, V., Meunier, M., peter Y.-a., Mateescu, D., Misra, a., Mrad, n., pinsonneau, J., Cambron, a., «Smart technologies for Structural Health Monitoring of aerospace Structures», proc. Workshop on Smart Materials and Structures, toronto, Canada, 2006.
Mobuchon, C., Carreau, p.J., Heuzey, M.C., «Model Systems for the Rheological Investigation of polymer/Clay nanocomposite», 3rd annual european Rheology Conference(aeRC), Crete, Grèce, 2006.
Chaallal, o., Bousselham, a., «parameters Influencing the Behavior of RC Beams Strengthened in Shear with externally Bonded FRp», proc. third International Conference on FRp Composites in Civil engineering (CICe 2006), Miami, Florida, uSa, 2006.
David, e., lamarre, l., nguyen, D.n., «Measurements of polarization/depolarization currents for modern epoxy-mica bars in different conditions», electric Insulation Conference (eIC), nashville, uSa, 2007.
CREPEC Rapport annuel 2006-2007 annual Report
pone, e., Skorobogatiy, M., Dubois, C., «Modelling of an all polymer Hollow optic Fiber Drawing», ppS europe/africa 2006 Meeting, pretoria, South africa, 2006.
Skorobogatiy, M., Dupuis, a., Gao, Y., Guo,n., pone, e., Godbout, n., lacroix, S., Dubois, C., «Biodegradable, Double-Core, porous optical Fiber» , Cleo/QelS 2006, long Beach, uSa, 2006.
Dufour, S., «the numerical Modeling of Free Surface Flows using Finite element Methods», 30th Brazilian national Congress for Computational and applied Mathematics (CnMaC) , Florianopolis, Brasil, 2007.
Dufour, S., «the numerical Modeling of the Flow of polymeric liquids, X Workshop on partial Differential equations», Rio de Janeiro, Brasil, 2007.
Fidahoussen, a., Dufour, S., orban, D., «Iterative Methods for the Modeling of Free Surface Flows using the Finite element Method, trends in numerical and physical Modeling for Industrial Multiphase Flows», Cargèse, France, 2007.
Shashahani, a., Dufour, S., Heuzey, M.C., «numerical Modeling of the Deformation in polymer Blends under Shear Flow», 9th International Conference on numerical Methods in Industrial Forming processes (nuMIFoRM), porto, portugal, 2007.
Mokwinski, Y., Dufour, S., pereira, F., Guibault, F., «an adaptive Methodology for the Simulation of tracer Flows in Heterogeneous Reservoirs», Second lnCC Meeting on Computational Modeling, petropolis, Brasil, 2006.
Feldman, D., Banu, D., Haghighat, F., «Sustainable alternative to plasticized pVC Building Material», International Conference on Healthy Buildings, lisbone, portugal, 2006.
el-aghoury, a., Vasudeva, R.K., Banu, D., elektorowicz, M., Feldman, D., «Biodegradation of VC-Vac Copolymer under the effect of Microorganisms», 3rd International Building physics Conference, Montreal, 2006.
Ganesan, R., arshad, W., «Hierarchical Finite element analysis of Curved Composite Beams», 21st annual tech. Conf. of american Soc. for Composites, Dearborn, uSa, 2006.
Ganesan, R., Chen, l., «Vibration analysis of tapered Composite Beams using Hierarchical Finite element and three-Dimensional ply Stiffness analysis», InCRuIS-2006, International Conference on Resource utilisation and Intelligent Systems, erode, India, 2006.
58
lamarre, l., David, e., nguyen, D.n., «temperature and Voltage Dependence of Dielectric properties of Modern epoxy Mica Insulations of HV Rotating Machines», electric Insulation Conference (eIC), nashville, uSa, 2007.
David, e., nair, a., Godin, t., Bellemare, J., «the Modeling of Ramped Direct Voltage Curves», 2006 Ieee International Symposium on electric Insulation (ISeI), toronto, Canada, 2006.
Godin, t., David, e., Bellemare, J., «experience with the Ramped Direct Voltage Method to assess Stator Winding Insulation Condition», HydroVision 2006, portland, uSa, 2006.
lamarre, l., David, e., «Dielectric response of rotating machine stator insulation system”, 2006 annual Report of the Conference on electrical Insulation and Dielectric phenomena (CeIDp)», Kansas City, uSa, 2006.
Soltani, G.R., David, e., «Condition assessment of Rotating Machine Winding Insulation by analysis of Charging and Discharging Currents», 2006 Ieee International Symposium on electric Insulation (ISeI), toronto, Canada, 2006.
Dupuis, a., Gao, Y., Guo, n., pone, e., Godbout, n., lacroix, S., Dubois, C., Skorobogatiy, M., «Biodegradable, Double-Core, porous optical Fiber for Sensing applications», (optical Fiber Sensors), Wa2, Cancun, Mexico, 2006.
Dupuis, a., Gao, Y., Guo, n., pone, e., Godbout, n., lacroix, S., Dubois, C., Skorobogatiy, M., «Biodegradable, Double-Core, porous optical Fiber», 15th Internation Conference on plastic optical Fibers (poF), C1-4, Seoul, Korea, 2006.
Gao, Y., Guo, n., Gauvreau, B., Rajabian, M., Skorobogata, o., pone, e., Zabeida, o., Martinu, l., Dubois, C., Skorobogatiy, M., «Consecutive Solvent evaporation and Co-Rolling techniques for polymer Multilayer Hollow Fiber preform Fabrication», (poF), H1-2, Seoul, Korea, 2006.
Guo, n., Gao, Y., Dupuis, a., pone, e., lacroix, S., Dubois, C., Skorobogatiy, M., «Fabrication of the Hollow all-polymer Bragg Fibers», (poF), C2-4, Seoul, Korea, 2006.
pone, e., Dubois, C., Guo, n., Gao, Y., Dupuis, a., lacroix, S., Skorobogatiy, M., «Fabrication of the Hollow all-polymer Bragg Fibers», european Conference on optical Communication (eCoC), We4.4.6, Cannes, France, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Ganesan, R., liu, D., «progressive Failure and post-Buckling Response of Mid-plane Symmetric tapered Composite plates under uni-axial Compression», the 21st annual technical Conference of the american Society for Composites, Dearborn, uSa, 2006.
Khosravi, p., Ganesan, R., Sedaghati, R., «non-linear analysis of Composite plates and Shells using a new Shell element», III european Conference on Computational Mechanics (eCCM-2006), lisbon, portugal, 2006.
Khosravi, p., Ganesan, R., Sedaghati, R., «limit load analysis of thin geometrically nonlinear structures using a new shell element», 47th aIaa/aSMe/aSCe/aHS/aSC Structures, Structural Dynamics, and Materials Conference, newport, RI, uS, 2006.
Zabihollah, a., Ganesan, R., Sedaghati, R., «analysis and Design optimization of Smart laminated Composite Beams using layerwise theory», III european Conference on Computational Mechanics (eCCM-2006), lisbon, portugal, 2006.
Zabihollah, a., Ganesan, R., Sedaghati, R., «Sensitivity analysis of laminated Beams Integrated with piezoelectric Sensors/actuators using layerwise theory», the 8th Int. Conf. on Computational Structures technology, las palmas de Gran Canaria, Spain, 2006.
Zabihollah, a., Ganesan, R., «Buckling analysis of Variable-thickness Composite Beams using a Higher-order Finite element», 6th Canada-Japan Workshop on Composites, 2006.
Guillaud, S., Heuzey, M.C., Carreau, p.J., polverari, M., «Rheology of Hydrophobically Modified polyelectrolytes», 3rd annual european Rheology Conference(aeRC), Crete, Grèce, 2006.
Guo, M.C., Heuzey, M.C., Carreau, p.J., «occurrence of Surface Defects in tpo Injection Foamed automotive parts», proceedings of Foams topCon 2006, Chigago, 2006.
Mobuchon, C., Heuzey, M.C., Carreau, p.J., «effect of Flow History on Structure Build-up and Breakdown of polymer/Clay nanocomposite Model System», 3rd Brazilian Conference on Rheology, Rio de Janeiro, Brazil, 2006.
Hu, S., Hoa, S.V., Ganesan, R., «Surface Finish of Composite automotive panels», International Conference on Composite Materials, Kyoto, 2007.
59
ngo, t.D., Hoa, S.V., ton-that, M.t., Wood adams, p., «effect of Shearing on Dispersion, Intercalation and exfoliation of Clay in epoxy», International Conference on Composite Materials, Kyoto, 2007.
Mohiuddin, M., Hoa, S.V., «electrically Cnductive Carbon nanofiber Based thermoplastic Composites for Fusion Bonding», SaMpe 2007, Baltimore June 2007.
thatte, G., Hoa, S.V., Merle, p., Haddad, e., «Self Healing epoxies for Space applications«, First International Conference on Self Healing materials, noorwijk, netherlands, 2007.
abdalla, I., Rahimzadeh, t., trueman, C. Hoa, S.V., «Shielding effectiveness and electrical Conductivity of Carbon/epoxy Composites», proc. SaMpe international conference and exhibition, long Beach, California, 2006.
abdalla, I., Rahimzadeh, t., Hoa, S.V., trueman, C., «experimental and theoretical evaluation of Shielding effectiveness and electrical Conductivity of Carbon/epoxy Composites», proc. 3rd international symposium on aerospace Materials, CoM 2006, Montreal, 2006.
allaoui, a., Hoa, S.V., pugh, M., «effect of preparation Method on the electrical properties of Carbon nanofiber/epoxy nanocomposites», proc. 6th Canada Japan workshop on Composites, toronto, Canada, 2006.
Hu, S., Hoa, S.V., Ganesan, R., «evaluation of Surface Finish of Composite automobile panels», 21st annual tech. Conf. of the american Soc. for Composites, Dearborn, 2006.
lebel, l., Hoa, S.V., «processing and Characterization of Braided Commingled Carbon/nylon thermoplastic Composites», toronto, Canada, 2006.
liu, W., Hoa, S.V., pugh, M., «Water absorption in nanoclay/epoxy nanocomposites», proc. 6th Canada Japan workshop on Composites», toronto, Canada, 2006.
liu, W., Hoa, S.V., pugh, M., «Shielding effectiveness and electrical Conductivity of Carbon/epoxy Composites», proc. SaMpe international conference and exhibition, long Beach, California, 2006.
ngo, t.D., Hoa, S.V., ton-that, M.t., «effect of Mixing Methods on the Mechanical properties of nanocomposites», CanCoM 2007, Winnipeg, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Kamal, M.R., «the Importance and optimization of Microstructure in polymer processing», 7th Chemistry in Industry Conference (CHeMInDIX), Bahrain, 2007.
Kamal, M.R., uribe-Calderon, J., lennox, B., «Influence of Interfacial tension on Dispersion and Flexural properties of pS/phosphonium organolcay nanocomposites», Spe anteC, Cincinnati, ohio, 2007.
Kamal, M.R., Chu, J., Derdouri, S., Hrymak, a., apostolou, K., «Microstructure of Micro-Injection Molded polymeric parts», annual Meeting, polymer processing Society, Salvador, Bahia State, Brazil, 2007).
Chung, Y.M., Weber, M.e., Kamal, M.R., «prediction of temperature, Viscosity and Shear Stress During Steady State of Vibation Welding of polyamide-6», Spe anteC, Charlotte north Carolina, 2006.
lee, K.W.D., Kamal, M.R., Chan, p.K., «effect of Shear on the phase Diagram and Morphology of pc/lCp Blends», Spe anteC, Charlotte, north Carolina, 2006.
Kamal, M.R., «Some Issues in polymer processing Research», the 3rd Conference of Cross-Strait academic Workshop on advanced Forming technology and Materials processing”, Society of advanced Molding technology (SaMt), Shanghai, China, 2006.
Kamal, M.R., «the Role, Development, and prediction of Microstructure in pol;ymer processing», proceedings of the 1st International Conference on Modeling and Simulation in polymer engineering and Science, Zhengzhou university, Zhengzhou, China, 2006.
Kamal, M.R., «the Importance of linking processing and Characterization», anteC 2006, 64th annual technical Conference, Society of plastics engineers, Charlotte, north Carolina, 2006.
Kamal, M.R., «Recent Developments in plastics technology», Kuwait Institute of Scientific Research (KISR), Kumait, 2006.
Kamal, M.R., uribe-Calderon, J., «polystyrene/Clay nanocomposites by Melt Intercalation», Spe anteC, Charlotte, north Carolina, 2006.
lee, K.W.D., Kamal, M.R., Chan, p.K., «thermally-Induced phase Separation in thermotropic liquid Crystalline polymer / polycarbonate Blends», 56th annual Conference, Canadian Society for Chemical engineering, Sherbrooke, Quebec, 2006.
60
adhikari, K., Hubert, p., Simard, B., Johnston, a., «effect of the localized application of SWnt Modified epoxy on the Interlaminar Shear Strength of Carbon Fibre laminates», 47th aIaa/aSMe/aSCe/aHS Structures, Structural Dynamics, and Materials Conférence, newark, RI, 2006.
ashrafi, B., Hubert, p., Vengallatore, S., «Structural performance of Carbon nanotube-Reinforced Composites for electrostatic Microactuators», 6th Joint Canada-Japan Workshop on Composites, toronto, on, 2006.
Dubé, M., Hubert, p., Yousefpour, a., Wadham-Gagnon, M., Denault, J., «Resistance Welding of thermoplastic Composite Skin/Stringer Specimens», 51st SaMpe International Symposium, long Beach, Ca, 2006.
Hubert, p., Haider, M., lessard, l., trochu, F., Ruiz, e., «Integrated approach for Class a Surface Finish of automotive Components Manufactured by RtM», SaMpe europe 27th International Conference, paris, France, 2006.
Wadham-Gagnon, M., Hubert, p., paidoussis, M.p., Semler, C., lavoie, D., «Hyperelastic Modeling of Rubber in Commercial Finite element Software (anSYStM)», 51st SaMpe International Symposium, long Beach, Ca, 2006.
Badilescu, S., Kahrizi, M., ashrit, p.V., Vo-Van, t., «Gold Composite and Macroporous nanoparticles Films by Vertical Deposition Method», nStI, nanotech., Boston, uSa, 2006.
Badilescu, S., Seirafianpour, n., ashrit, p.V., Hajiaboli, a.R., Kahrizi, M., truong, V.V., «High Quality Well-ordered arrays of polystyrene Microspheres and Gold nanoparticles prepared by a Convective assembly Method», ICoopMa2006, Darwin, australia, 2006.
al-Wohoush, M., Sánchez-García, S., Kamal, M.R., «Microstructure of thermoplastic laser Welded Joints», Spe anteC, Cincinnati, ohio, 2007.
Chu, J., Hrymak, a., Kamal, M.R., «Microstructural Characteristics of Micro-Injection Molded thermoplastics», Spe anteC, Cincinnati, ohio, 2007.
lee, K.W.D., Kamal, M.R., Chan, p.K., «phase Separation in thermotropic liquid Crystalline polymer/polycarbonate Blends under Shear», Spe anteC, Cincinnati, ohio, 2007.
CREPEC Rapport annuel 2006-2007 annual Report
uribe-Calderon, J., Kamal, M.R., lennox, B., «Surface properties of Modified Montmorillonite», 56th annual Conference, Canadian Society for Chemical engineering, Sherbrooke, Quebec, 2006.
Demers, M., labossière, p., Mercier, C., «preventive GFRp Jacketing of prestressed Concrete Bridge Beams», 3rd International Conference on Durability and Field applications of Fiber Reinforced polymer Composites for Construction (CDCC 2007), Québec, Canada, 2007.
Demers, M., labossière, p., nishizaki, I., Sarsaniuc, B., neale, K., «Durability of CFRp Sheets under natural Climatic Conditions», 3rd International Conference on Durability oand Field applications of Fiber Reinforced polymer Composites for Construction (CDCC 2007), Québec, Canada, 2007.
Gheorghiu, C., labossière, p., proulx, J., «Behaviour of CFRp-Strengthened RC-Beams Subjected to aging Conditions», 8th International Symposium on Fiber Reinforced polymer Reinforcement for Reinforced Concrete Structures (FRpRCS-8), patras, Greece, 2007.
labossière, p., neale, K., Rochette, p., Demers, M., Savard, M., Desgagné, G., «long-term Behaviour of an FRp-Strengthened Structure - the Case of the Sainte-Émélie de l’Énergie Bridge», 1st Inaugural asia-pacific Conference on FRp in Structures (apFIS 2007), Hong Kong, 2007.
labossière, p., newhook, J., «How Structural Health Monitoring Could Become a useful tool to Implement Sustainable Development practives in Civil engineering», 3rd International Conference on Structural Health Monitoring of Intelligent Insfrastructure (SHMII-3), Vancouver, 2007.
pelletier, H., labossière, p., «effect of a FRp Confinement on the Behaviour of Concrete Cylinders Damaged by alkali-aggregate Reactions», annual Conference of the Canadian Society for Civil engineering, Yellowknife, nWt, 2007.
Demers, M., Mercier, C., labossière, p., «Glass-FRp Jacketing of prestressed Concrete Beams», 7th International Conference on Short and Medium Span Bridges, Montréal, Quebec, Canada, 2006.
Gheorghiu, C, Bockstael, D.l., Rhazi, J.e., labossière, p., «experimental and theoretical natural Frequencies of Vibration for Fatigued Beams with FRps», 7th International Conference on Short and Medium Span Bridges, Montréal, Quebec, Canada, 2006.
61
pelletier, H., labossière, p., «Réhabilitation à l’aide de matériaux composites de colonnes affectées par les réactions alkalis-granulats», 13e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art, Québec, Canada, 2006.
St-Georges, É., Roy, n., labossière, p., proulx, J., paultre, p., «experimental Study of FRp Wrapping for RC Bridge under Seismic loads», 3rd International Conference on FRp Composites in Civil engineering (CICe 2006), Miami, Florida, 2006.
naderi, G., lafleur, p.G., Dubois, C., «Dynamically Vulcanized thermoplastic elastomer nanocomposite Based on epDM/pp: Rheology and Morphology», 3rd annual european Rheology Conference, Hersonisos, Greece, 2006.
Stoeffler, K., lafleur, p.G., Denault, J., «polyethylene nanocomposites Based on High thermal Stability organoclays» 3rd annual european Rheology Conference, Hersonisos – Crete, 2006.
Haider, M., lessard, l., Hubert, p., «an experimental Investigation for Class a Surface Finish in Resin transfer Molding process», 12th european Conference on Composite Materials, Biarritz, France, 2006.
thériault, F., lessard, l., «Design process of a Composite part for a Helicopter», Sixth Joint Canada-Japan Workshop on Composites, 2006.
Graffe, a., Maric, M., «nanoporous Materials from Block Copolymers», CSChe Conference, Sherbrooke, Quebec, 2006.
Maric, M., Graffe, a., «Sulfonate Functional nano-porous Membranes templated from ordered Block Copolymers», aIChe annual Conference, San Francisco, Ca, 2006.
Morton, K., Maric, M., «polystyrene Macro-Initiator for Ring-opening polymerization of lactides», CSChe Conference, Sherbrooke, Quebec, 2006.
alvarez, a., Zaidi, a., Masmoudi, R., «Bond-Slip Behaviour of FRp Bars under low and High temperature - experimental and theoretical Studies», 3rd International Conference on Durability of Composites for infrastructures, Québec, Canada, 2007.
Zaidi, a., Masmoudi, R., «effect of Concrete Cover thickness and FRp-Bars Spacing on the transverse thermal expansion of FRp Bars», 8th International Symposium on Fiber Reinforced polymer Reinforcement for Concrete Structures, FRpRCS-8, patras, Greece, 2007.
CREPEC Rapport annuel 2006-2007 annual Report
Janz, a., Gröbner, J., Mirkovi, D., Medraj, M., Zhu, J., Chang, Y.a., Schmid-Fetzer, R., «Investigation of Mg-al-Sr phase equilibria», 7th International Conference on Magnesium alloys and their applications 2006, 74-80, Dresden, 2006.
M. Medraj, M.a. parvez, e. essadiqi and J. li, «new phases in the Mg-al-Sr System», tHeRMeC 2006, Vancouver, 2006.
Fang, H., Mighri, F., ajji, a., «Miscibility Characterization of SMa/San and SMa/pMMa Blends by Differential Scanning Calorimetry and Fluorescence techniques», polymer processing Society annual Meeting ppS-23, Brazil, 2007.
Mighri, F., Yakisir, D., Bousmina, M., «process and polymer Blend optimization for the preparation of porous peMFC electrode Gas Diffusion layer», 2006 Fuel cell seminar, Hawaii, nov.13-17, 2006.
Mighri, F., Yakisir, D., Bousmina, M., «process optimization for the Development of electrode Gas Diffusion layer for peMFC», polymer processing Society ppS-2006, pretoria, South africa, 2006.
Godat, a.M., neale, K.W., labossière, p., «towards Modelling FRp Shear-Strengthened Reinforced Concrete Beams», 8th International Symposium on Fiber Reinforced polymer, Reinforcement for Reinforced Concrete Structures (FRpRCS-8), patras, Greece, 2007.
al Chami, G., thériault, M., neale, K.W., «long-term Creep performance of CFRp-Strengthened Concrete elements», 2nd Internationa Fib Congress, naples, Italie, 2006.
ebead, u.a., neale, K.W., abedl Baky, H., «Debonding Failures in FRp-Strengthened Concrete Beams: a Simplified analysis Based on Response Surface Methodology», 1st International Structural Speciality Conférence, Calgary, alberta, 2006.
elsayed, W.e., ebead, u.a., neale, K.W., «analysis of FRp-Strengthened two-Way Slabs», 2nd Internationa Fib Congress, naples, Italie, 2006.
Inal, K., neale, K.W., ososkov, Y., Jain, M.K., Wilkinson, D.S., «numerical and experitnental Investigation of FlDs for Dual phase Steels», Sae World Congress, Détroit, Michigan, 2006.
62
Zaidi, a., Masmoudi, R., «numerical analysis of the transverse thermal Behaviour of FRp Bars embedded in Concrete», 3rd International Conference on Durability of Composites for infrastructures, Québec, Canada, 2007.
Masmoudi, R., Metiche, S., «Flexural Behaviour of Fiber Reinforced polymer (FRp) poles», Conférence annuelle de la société canadienne de génie civil, Calgary, Canada, 2006.
Masmoudi, R., Mohamed, H., «Finite element Modeling of FRp-Filament Winded poles», third International Conference on Composites in Civil engineering (CICe 2006), Miami, États-unis, 2006.
Zaidi, a., Masmoudi, R., «thermal effect on FRp-Reinforced Concrete Slabs», Conférence annuelle de la société canadienne de génie civil, Calgary, Canada, 2006.
Zaidi, a., Masmoudi, R., «effect of low and High temperatures on the transverse thermal expansion of FRp Bars embedded In Concrete», 7th International Conference on Short and Medium Span Bridges, Montreal, Canada, 2006.
al-Kazzaz, H., Medraj, M., Cao, X., Jahazi, M., Xiao, M., «effect of Gap Size and laser power on nd:YaG laser Weldability of aerospace Grade Magnesium alloy Ze41a-t5», the Conference of Metallurgists, Montreal, 2006.
aljarrah, M., parvez, M.a., Wang, X., essadiqi, e., li, J., Medraj, M., «Mg-al-(Ca, Sr) Systems - an experimental analysis», the Conference of Metallurgists 2006, Montreal, 2006.
arafin, M.a., Medraj, M., turner, D.p., Bocher, p., «thermodynamic Modeling and experimental Investigations of Brazed Joints used in aerospace Industry», International Brazing and Soldering Conference, texas, 2006.
arafin, M.a., Medraj, M., turner, D.p., Bocher, p., «Mathematical Modeling and experimental Investigations of Isothermal Solidification during transient liquid phase Bonding of nickel Superalloys», tHeRMeC 2006, Vancouver, 2006.
arafin, M.a., Bocher, p., turner, D.p., Medraj, M., «optimization of process Variables During tlp Bonding of nickel Superalloys», CoM 2006 – International Symposium on aerospace Materials and Manufacturing: emerging Materials, processes, and Repair techniques, Montreal, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
lévesque, J., Inal, K., neale, K.W., luo, a.a., Mishra, R.K., «numerical Modelling of large Strain Deformation in Magnesium», Magnesium technology 2006, tMS annual Meeting and exhibition, San antonio, texas, 2006.
tardif, D., neale, K.W., Demers, M., Zaki, a.R., tadros, G., «Investigation of an Innovative FRp-Reinforced Bridge Deck System», 7th International Conference on Short and Medium Span Bridges, Montreal, Quebec, 2006.
nollet, M.-J., leBoeuf, D., Khaled, a., «Microzonage et vulnérabilité sismique des ponts de la Ville de Québec », 14e colloque sur la progression de la recherche québecoise sur les ouvrages d’art, Québec, Canada, 2007.
leBoeuf, D., nollet, M.-J., achim, C., Jolicoeur, l., «Microzonation and Vulnerability assessment for Seismic Risk Management in Quebec City», 78th annual Meeting of the eastern Section of the Seismological Society of america (eS-SSan 2006), ottawa, Canada, 2006.
leBoeuf, D., nollet, M.-J., Khelalfa, J., Jolicoeur, l., «Development of a Web-based Information System for urban Seismic Risk Management», Joint International Conference on Computing and Decision Making in Civil and Building engineering, Montréal, Canada, 2006.
nollet, M.-J., lefebvre, K., Karbassi, a., «appréciation des outils actuels concernant l’évaluation de la vulnérabilité sismique des bâtiments à caractère historique», 1ère Conférence internationale spécialisée sur le génie des structures, SCGC, Calgary, Canada, 2006.
Ruiz, e., achim, V., Bréard, J., Chatel, S., trochu, F., «a Fast numerical approach to Reduce Void Formation in liquid Composite Molding», 8 International Conference on Flow processes in Composite Materials, Mines de Douai, France, 2006.
Ruiz, e., Chatel, S., trochu, F., «a Simplified numerical approach to Simulate Resin transfer Molding with a Dispersion Medium», 8 International Conference on Flow processes in Composite Materials, Mines de Douai, France, 2006.
Ruiz, e., Waffo, F., owens, J., Billotte, C., trochu, F., «Modeling of Resin Cure Kinetics for Molding Cycle optimization», 8 International Conference on Flow processes in Composite Materials, Mines de Douai, France, 2006.
63
Boucekine, Y, Sanschagrin, B., Derdouri, a., «Investigation of Re-Crystallization of Injection Molded tpo unpainted plaques», anteC 2006, Charlotte, nC, uSa, 2006.
Fortin, C., Sanschagrin, B., Huet, G., Gagné, S., «the CaMaQ project : a Design-Build experience from a Virtual Immersion in aerospace Industry practices», 2nd Int. CDIo Conf., linkoping, 2006.
alam, M., Soucy, Y., Sedaghati, R., Bhat, R., «output-only Modal testing for on-orbit Satellite appendages», CaSI aero 2007, toronto, Canada, 2007.
Yang, F., Sedaghati, R., esmailzadeh, e., «In-plane Free Vibration of Curved Beams using Finite element Method», aSMe 2007 International Design engineering technical Conferences & Computers and Information in engineering Conference, las Vegas, nevada, uSa, 2007.
Yang, F., Sedaghati, R., esmailzadeh, e., «Random Vibration Suppression of non-uniform Curved Beams using optimal tuned Mass Dampers», aSMe 2007 International Design engineering technical Conferences & Computers and Information in engineering las Vegas, nevada, uSa, 2007.
Yang, F., Sedaghati, R., esmailzadeh, e., «passive Vibration Control of timoshenko Beams using optimal tuned Mass Dampers», 21st Canadian Congress of applied Mechanics (CanCaM 2007), toronto, Canada, 2007.
Chintapalli, S., Sedaghati, R., abdo, M., «preliminary Design of a Wing Box for Multi-Disciplinary Design optimization process», 11th aIaa/ISSMo Multidisciplinary analysis and optimization Conference, portsmouth, Virginia, 2006.
Dominguez, a., Stiharu, I., Sedaghati, R., «translational actuation effect of the Magneto-Rheological Damper», the ninth pan american Congress of applied Mechanic(paCaM IX), Mérida, Yucatán, México, 2006.
Firoozrai, a., Stiharu, I., Sedaghati, R., «Developing of Hard landing Diagnosis System Based on acceleration Sensing using MeMS», 2006 International Conference on Dynamics, Instrumentation and Control, Queretaro, Mexico, 2006.
Khosravi, p., Sedaghati, R., Ganesan, R., «the effect of Membrane Formulation on the nonlinear Buckling analysis of Shallow thin Shells», 47th aIaa/aSMe/aSCe/aHS/aSC Structures, Structural Dynamics & Materials Conference, newport, Rhode Island, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Farhat, M., Rivera, C., Fradette, l., Heniche, M., tanguy, p.a., «numerical and experimental Study of Coaxial Mixers for Viscous newtonian and non-newtonian Fluids», proc. 12th eur. Conf. Mixing, 89-96, Bologne, 2006.
Fradette, l., tanguy, p.a., Glenat, p., «Continuous emulsification of Heavy oil using Static Mixers», proc. 4th World Congress on emulsions, lyon, 2006.
ouzineb, K., lord, C., lesauze, n., Graillat, C., tanguy, p.a., McKenna, t., «Homogenization Devices for the production of Miniemulsions», proc. Mixing VIII, university College, london, 2006.
Rivera, C., Foucault, S., Heniche, M., espinosa-Solares, t., tanguy, p.a., «Mixing analysis in a Coaxial Mixer», proc. Mixing VIII, university College, london, 2006.
takenaka, K., Yatomi, R., Morinaga, S., tanguy, p.a., «Comparison of Solid-liquid Mixing performance Between a pitched Blade turbine and the Maxblend Impeller», proc. 12th eur. Conf. Mixing, 273-278, Bologne, 2006.
tanguy, p.a., «Complex Mixing in Coaxial Multiple Shaft Stirred tanks: a Review», proc. XXII Interamerican Congress of Chemical engineering, Buenos aires, 2006.
tanguy, p.a., Heniche, M., Rivera, C., Devals, C., takenaka, K., «Recent Developments in CFD applied to Viscous and non-newtonian Mixing in agitated Vessels», proc. of 6th Int. Conf. on CFD, Melbourne, 2006.
tanguy, p.a., Iranshahi, a., thome, G., Heniche, M., Fradette, l., takenaka, K., «CFD and physical Investigation of Mixing with the Maxblend Impeller», proc. 22th polymer processing Society Meeting, Yamagata, 2006.
Yatomi, R., takenaka, K., Morinaga, S., takahashi, K., tanguy, p.a., «large paddle Impeller for enhancing Surface aeration: application to polymerization Reactor with liquid level Change», proc. 12th eur. Conf. Mixing, Bologne, 2006.
terriault, p., torra, V., Fisher, C., Brailovski, V., Isalgue, a., «Superelastic Shape Memory alloy Damper equipped with a passive-adaptative pre-Straining Mechanism», proceedings of the 9th Canadian Conference on earthquake engineering (9CCee), ottawa, Canada, 2007.
64
Khosravi, p., Sedaghati, R., Ganesan, R., «Shape optimization of thin-walled Structures Based on a new Shell element and uniform Strain energy Criterion», the eighth International Conference on Computational Structures technology, las palmas de Gran Canaria, Spain, 2006.
Zabihollah, a., Sedaghati, R., Ganesan, R., «Sensitivity analysis of laminated Beams Integrated with piezoelectric Sensors/actuators using layerwise theory», the eighth International Conference on Computational Structures technology, las palmas de Gran Canaria, Spain, 2006.
Zabihollah, a., Sedaghati, R., Ganesan, R., «optimal Design of Smart laminated Beams using layerwise theory», proceedings of the CanSMaRt 2006-International Conference on Smart Materials and Structures, toronto, Canada, 2006.
Zabihollah, a., Sedaghati, J., Ganesan, R., «Design optimization of Smart laminated Composite Beams using layerwise theory”, III euro. Conf. on Computational Mech., 2006.
Shao, Y., Darchis F., «load Carrying Capacities of pultruded FRp Sheet piling», third International Conference on FRp Composites in Civil engineering (CICe2006), Miami, 2006.
ascanio, G., tanguy, p.a., «Visualization of Flow patterns in Stirred Vessels with eccentric Impellers», proc. XXII Interamerican Congress of Chemical engineering, Buenos aires, 2006.
Barailler, F., Heniche, M., tanguy, p.a., «CFD analysis of a Rotor-Stator Mixer with Viscous Fluids», proc. Mixing VIII, university College, london, 2006.
Cabaret, F., Bikhir, S., Fradette, l., tanguy, p.a., «effect of Shaft eccentricity on the Mixing with a Radial Impeller in laminar Regime», proc. 11th Congress of apCChe, Kuala lumpur, 2006.
Cabaret, F., Fradette, l., tanguy, p.a., «Characterization of Macro-Mixing Kinetics using advanced Image analysis», proc. 12th eur. Conf. Mixing, 391-398, Bologne, 2006.
Cabaret, F., Rivera, C., Fradette, l., Heniche, M., tanguy, p.a., «performance of a Dual Shaft Mixing System in Viscous newtonain liquid Mixing», proc. 12th eur. Conf. Mixing, 97-104, Bologne, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
lafortune, C., terriault, p., Brailovski, V., torra, V., “Superelasticity-Related phenomena of Shape Memory alloy passive Dampers”, proceedings of the conference SMSt-2006, asilomar, Ca, uSa, 2006.
lafortune, C., terriault, p., Brailovski, V., torra, V., «experimental and Finite element analysis of a Superelastic Shape Memory alloy Damper», International Conference on Shape Memory and Superelastic technologies (SMSt-2006), California, uSa, 2006.
Martorell, F., Isalgue, a., torra, V., lovey, F.C., terriault, p., «SMa a tool for passive Damping in Civil Buildings», 4th World Conference on Structural Control and Monitoring (4WCSCM), San Diego, États-unis, 2006.
Kuhn, M., napporn, t., Meunier, M., Vengallatore, S., therriault, D., «Fabrication and Characterization of Single-Chamber Micro-Solid oxide Fuel Cells with Interdigitated electrodes,” Hydrogen and Fuel Cells 2007, International Conference and trade Show, Vancouver, BC, Canada, 2007.
laberge lebel, l., el Khakani, B.M.a., therriault, D., «three-Dimensional Microstructures of SWCnt-polymer nanocomposites by Means of uV-assisted Direct-Writing», Simha symposium on polymer physics and polymer nanocomposites, Montreal, Quebec, Canada, 2007.
Bey-oueslati, R., palm, S., therriault, D., Martel, S., «High-Speed Direct-Write for Rapid Fabrication of three-Dimensional Microfluidic Devices», 3rd Microfluidics French Conference – Microfluidics 2006, toulouse, France, 2006.
Bey-oueslati, R., therriault, D., Martel, S., «Micro Heat pipe Fabrication: High performance Deposition platform for electronic Industry», 5th International Workshop on Microfactories (IMWF06), Besançon, France, 2006.
Bruneaux, J., therriault, D., Heuzey, M.C., «Micro-extrusion of organic Ink for Direct-Write assembly”, Deuxième colloque annuel du CRepeQ, Montréal, Quebec, Canada, 2006.
Ghafar-Zadeh, e., Sawan, M., therriault, D., «a novel Microelectrofuidic packaging for lab-on-Chip applications», aSMe International Mechanical engineering Congress and exposition, Chicago, Illinois, 2006.
65
Ghafar-Zadeh, e., Sawan, M., therriault, D., «Microelectrofluidic packaging for CMoS Based laboratory-on-Chips», International electronics packaging Symposium, Ge Global Research Center, nyskayuna, nY, 2006.
Ghafar-Zadeh, e., Sawan, M., Jalali, M., therriault, D., «CMoS-Based Capacitive Sensor array Dedicated to Microfluidic Studies», the international workshop on computer architecture for machine perception and sensing (CaMpS06), Montreal, Quebec, Canada, 2006.
Ghafar-Zadeh, e., Sawan, M., therriault, D., «CMoS Based lab-on-Chip», 2006 nStI nanotechnology Conference and trade Show, Boston, Ma, 2006.
Ghafar-Zadeh, e., Sawan, M., therriault, D., «programmable three-Dimensional Microfluidic Fabrication», 2006 nStI nanotechnology Conference and trade Show, Boston, Ma, 2006.
Kuhn, M., napporn, t., Meunier, M., Vengallatore, S., therriault, D., «Micro- and nanofabrication of Mixed-Reactant Single-Chamber Solid oxide Fuel Cells by Direct-Writing», Deuxième colloque annuel du CRepeQ, Montréal, Quebec, Canada, 2006.
Kuhn, M., napporn, t., Meunier, M., Vengallatore, S., therriault, D., «Microfabrication de piles SoFC à chambre unique par écriture directe», 74e congrès de l’aCFaS, Montreal, Quebec, Canada, 2006.
Kuhn, M., napporn, t., Meunier, M., therriault, D., Vengallatore, S., «Direct-Write Microfabrication of Single-Chamber Solid oxide Fuel Cells with Interdigitated electrodes», Materials Research Society Symposium proceedings, MRS Fall Meeting 2006.
Kuhn, M., therriault, D., Vengallatore, S., napporn, t., Meunier, M., «Microfabrication de piles SoFC à chambre unique par écriture directe», 74e congrès de l’aCFaS, Montréal, Québec, 2006.
ngo t.-D., ton that M.-t., Hoa S.V., Cole K.C., «preparation and properties of epoxy nanocomposites part I: effect of premixing on Dispersion of organoclay», polymer nanocomposite conference, IMI, Boucherville, Québec, Canada, 2007.
ngo t.-D., ton-that M.-t., Hoa S. V., Cole K. C., «Rub-bery and Glassy epoxy-Clay nanocomposites», proc. CanCoMp 2006, Vancouver, BC, Canada, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
Roy, R., turenne, S., «Fabrication of peltier Modules», 18th Canadian Materials Science Conference, Montréal, Québec, Canada, 2006.
Vasilevskiy, D., Roy, F., Renaud, e., Masut, R.a., turenne, S., «Mechanical properties of the Interface between nickel Contact and extruded (Bi1-xSbx)2(te1-
ySey)3 thermoelectric Materials», 25th International Conference on thermoelectrics », ICt’06, Vienne, autriche, 2006.
el Majdoubi, M., Vu-Khanh, t., David, e., «effect of physical ageing on Yielding Kinetics of polypropylene», 2006 Conference on Mesomechanics, porto, portugal, 2006.
Harrabi, l., Dolez, p.I., Vu-Khanh, t., lara, J., «Methods for the Characterization of protective Glove Flexibility», 2nd International Conference of applied Research textile. Monastir, tunisia, 2006.
Harrabi, l., Dolez, p.I., Vu-Khanh, t., lara, J., «optimi-zation in the Selection of protective Gloves for Resistance to Mechanical Risks», 2nd International Conference of applied Research textile, Monastir, tunisia, 2006.
Harrabi, l., Dolez, p.I., Vu-Khanh, t., lara, J., «evaluation of the Flexibility of protective Gloves», 3rd european Conference on protective Clothing and noKoBeteF 8, Gdynia, poland, 2006.
Vu-Khanh, t., Dolez, p., «new technologies and Challenges for textiles in protective Clothing», 2nd International Conference of applied Research textile, Monastir, tunisia, 2006.
arzpeyma, a., Dolatabadi, a., Wood-adams, p.M., «a 3-D numerical Modeling of Droplet actuation Via electrowetting in Microchannels», 5th Joint aSMe/JSMe Fluids engineering Conference, San Diego, California, 2007.
arzpeyma, a., Dolatabadi, a., Wood-adams, p.M., «numerical Investigation of electrowetting phenomena in Microchannels», annual Conference of the CFD Society of Canada, toronto, 2007.
Wood-adams, p.M., Motamedi, R., Heuzey, M.C., «estimation of Molecular Weight Distribution from Viscoelastic Behavior of polymer Solutions», annual european Rheology Conference, naples, Italy, 2007.
Huang, C., Wood-adams, p.M., Karjala, t., ansems, p., «Rheology of Highly Filled propylene-ethylene Copolymers», annual european Rheology Conference, Hersonosis, Greece, 2006.
66
ngo t.-D., ton-that M.-t., Hoa S. V., Cole K. C., ´Rubbery and Glassy epoxy-Clay nanocomposites», proc. Sixth Joint Canada-Japan Workshop on Composites, toronto ontario, 2006.
ton-that, M.-t., Denault, J., Bloch, J., Champagne, M., «Melt Intercalation of poly(lactic acid) nanocomposites: Fabrication Microstructure and performance», proc. Spe anteC, Charlotte, nC, uSa, 2006.
ton-that M.-t., Denault J., Cole K. C., «adhesion approaches for polyolefin Composites», Intl. SaMpe Symp. exhib., long Beach Ca, 2006.
ton-that M.-t., Denault J., Gagnon p., Cole K. C., «adhesion approaches for polyolefin Composites», proc. SaMpe 2006, anaheim, Ca, uSa, 2006.
ton-that M.-t., Denault J., patenaude e., leelapornpisit W., «Formulation and processing of polypropylene – Flax Fiber Composites», proc. Bioplastics 2006, Montreal, QC, Canada, 2006.
ton-that M.-t., Denault J., patenaude e., leelapornpisit W., «Intercalation/exfoliation and performance of Clay-poly(lactic acid) nanocomposites», proc. Bioplastics 2006, Montreal, QC, Canada, 2006.
ton-that M.-t., Denault J., perrin F., Cole K. C., «High performance polyolefin - Wood Fiber Composites», proc. Bioplastics 2006, Montreal, QC, Canada, 2006.
ton-that M.-t., li J., «the Role of Interface in Fabrication of Clay-polyolefin (po) nanocomposites: Computation and Reality», proc. Multifunctional Materials 2006, Honolulu, HI, uSa, 2006.
ton-that, M.-t., perrin-Sarazin, F., Denault, J., Cole, K., «Bio-Fiber Composites from Recycled pp», proc. Spe anteC, Charlotte, nC, uSa, 2006.
andré, C., Clin, th., Vasilevskiy, D., Fréchette, p., turenne, S., Masut, R.a., «Mechanical, thermoelectric and transport properties of extruded polycrystalline textured alloys», 13th Canadian Semiconductor technology Conference, Montréal, Canada, 2007.
ledoux-Corbeil, a., turenne, S., «Hot tearing in Magnesium Casting alloy by Finite element Simulation», 18th Canadian Materials Science Conference, Montréal, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
eisa, M., el-Salakawy, e., Benmokrane, B., «Construction of CRCp Slabs Reinforced with GFRp Bars Implemented on Highway 40 east», technical Report, submitted to the Ministry of transportation of Quebec, pavement Division, 23 pages, 2007.
el-Gamal, S., patrice, C., el-Salakawy, e., Benmokrane, B., «laboratory testing on the Durability and Structural performance of Slab Specimens Reinforced with FRp Bars of laurier-taché parking», technical report submitted to pWGSC, university of Sherbrooke, Quebec, Canada, 60 pages, 2007.
ahmed, e., el-Salakawy, e.F., Benmokrane, B., «Behaviour of post-Installed adhesive GFRp anchors in Concrete», technical Report, submitted to pultrall Inc., thetford Mines, Quebec, 12 pages, 2006.
Benmokrane, B., ahmed, e.a., el-Salakawy, e., «Conception de poutres de ponts en béton précontraint renforcées avec des étriers en matériaux composites», Rapport d’Étape 3 (phase a), soumis au ministère des transports du Québec, 35 pages, 2006.
el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «laboratory Structural testing of Composite telecommunication towers, part II: torsion tests of the tower Joint», technical Report no. 2, submitted to towertex Inc., 18 pages, 2006.
Debaiky, a., el-Salakawy, e.F., Benmokrane, B., «laboratory testing of Composite telecommunication towers in Flexure & torsion», technical Report no. 2, towertex Inc., 16 pages, 2006.
el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «Design of Concrete Bridge Deck Slabs using Different types and Diameters of GFRp Bars», technical Report, submitted to pultrall Inc., thetford Mines, Quebec, 54 pages, 2006.
el-Gamal, S., el-Salakawy, e.F., Benmokrane, B., «Design of Concrete Bridge Deck Slabs using Different types and Diameters of GFRp Bars: overhangs», technical Report, submitted to pultrall Inc., thetford Mines, Quebec, 34 pages, 2006.
67
puBlICatIonS autres Publications en 2005-2006 / otHer Publications in 2005-2006
el-Ragaby, a., el-Salakawy, e.F., Benmokrane, B., «Installation and Monitoring of the Structural Slabs Reinforced with Fibre Reinforced polymer Rods (laurier-taché parking Garage - addendum 2)», technical progress Report no. 1, submitted to pWGSC, Gatineau, Quebec, Canada, 21 pages, 2006.
Mechbal, n., Bousmina, M., « a device for characterizing structure evolution during flow», International patent, Wo/2007/033479, 2007.
Vaudreuil S., Bousmina, M., «a new Route for Making Carbon nanotubes and Carbon nanosprings and nanosolenoids», International pendent patent, 2007.
Kaliaguine, S., Bousmina, M., «a novel strategy for making layered structures», International pendent patent, 2006.
Sinha Ray, S., Bousmina, M., «In nanostructured polymer nanocomposites», american Scientific publisher, Chap. 23, ed. nalwa, los angeles, 2006.
Sinha Ray, S., Bousmina, M., «In polymer nanocomposites», Woodhead publishing limited, Chap. 3, Sydney, 2006.
Sinha Ray, S., Bousmina, M., «polymer nanocomposites and their applications», american Scientific publishers, ISBn: 158883-099-3, new York, 2006.
Brailovski, V., Baril, Y., Bocher ph., «optical Measu-rement of anisotropy in Superalloy Sheet Metal using Video extensometry», pratt&Whitney Canada, 2006.
Chaallal, o., leBoeuf, D., Bousselham, a., Cucurrull, I., «Systèmes de blindage et réduction de la distance de garde en têtes de tranchées», Volume I et Volume II, IRSSt, 300 pages, 2006.
Cole K. C., «Vibrational Spectroscopy of polymer Com- posites», Chapter in Vibrational Spectroscopy of polymers: principles and practice, n. everall, J. M. Chalmers and p. R. Griffiths (eds.), John Wiley & Sons, 2007.
e. David, Soltani, R., nair, a., «laboratory tests on Ge Hydro-Generator Bars under environment Stresses«, rapport technique pour Ge Hydro, 38 pages, 2007.
CREPEC Rapport annuel 2006-2007 annual Report68
Fews, R., Derisi, B., Hoa, S.V., Hojjati, M., «thermoplastic Composite landing Gear for Helicopters», patent under preparation by Bell Helicopter company, 2007.
Haddad, e., Hoa, S.V., Merle, p., thatte, G., Guntzbeger, Y., «Self Healing Composite Material», patent filed in november 2006.
Rochette, p. labossière, p., «Fatigue and post-Fatigue Quasi-Static performance of RC-Beams externally Strengthened with CFRps», Innovation transport, Ministère des transports du Québec, 2006.
Demers, M., labossière, p., «Chemisage de pouters en béton précontraint au moyen de matériaux composites – Démonstration en chantier (phase 2) – Rapport des travaux au pont d’étagement de l’autoroute Chomedey, remis au Ministère des transports du Québec, 2006.
Mahabadi, H.K., agur, e.e., Maric, M., Chen, a.K., liebermann, G., ng, t.H., «emulsion polymerization process for Manufacture of Sulfonated polyester», Can. pat. appl. Ca 2558423 a1 20070309, 2007.
Maric, M., toth, a.e., Saban, J., Marko, D., «Fluidized Bed Spray Coating of polyester Chemical toners with additives», u.S. pat. appl. publ. 2006093956 a1, 2006.
Sacripante, G.G., Mayer, F.M., nosella, K.D., Farrugia, V.M., patel, R.D., Maric, M., Chen, a.K., Zwartz, e.G., ng, t.H., «low Melt toners and processes thereof», u.S. pat. appl. publ. 2006063086 a1, 2006.
Inal, K., neale, K.W., «High performance Computational Modelling of Microstructural phenomena in polycrystalline Metals», advances in engineering Structures, Mechanics & Construction, M. pandey, W.C. Xie and l. Xu, eds., Springer, 583–593, 2006.
lévesque, J., Inal, K., neale, K.W., luo, a.a., Mishra, R.K., Jiang, l., «numerical Modelling of large Strain Deformation in Magnesium alloy aM30», Magnesium technology 2007, R.S. Beals, a.a. luo, n.R. neelameggham and M.o. pekguleryuz, eds., the Minerals, Metals & Materials Society, 11−16, 2007.
nollet, M.-J., leBoeuf, D., Khaled, a., Vulnérabilité sismique des infrastructures essentielles de la ville de Québec », rapport préliminaire soumis à la Ville de Québec, 65 pages, 2007.
leBoeuf, D., nollet, M.-J., «Microzonage et vulnérabilité sismique de la ville de Québec 2005-2006 », rapport final soumis à la Ville de Québec, 108 pages, 2006.
Crine, J.p., e. David, «Vieillissement et vie résiduelle des isolants», Rapport technique présenté à l’IReQ dans le cadre d’un contrat de recherche, 72 pages, 2006.
e. David, Godin, t., Bellemare, J., «agrégation de Cote-Certitude-poids : essai de montée en tension progressive», rapport interne IReQ, 28 pages, 2006.
e. David, lamarre, l., «Cote-Certitude-poids : mise à jour de l’algorithme pour l’essai IteRG », rapport interne IReQ, 24 pages, 2006.
e. David, lamarre, l., «Rapport sur les essais de laboratoire sur les systèmes d’isolation modernes des enroulements statoriques : mesures dans le domaine du temps et des fréquences», rapport interne IReQ, 58 pages, 2006.
lamarre, l., David, e., «propriétés thermo électriques des isolations modernes époxy-mica de barres d’alternateur et correction de température pour les valeurs de résistance d’isolation ainsi que des courants dans IteRG», Rapport interne IReQ, 37 pages, 2006.
pone, e., Dubois, C., Guo, n., Gao, Y., Dupuis, a., lacroix, S., Skorobogatiy, M., «Drawing of Hollow, Multilayered all-polymer Fibers», in Smart nanotextiles, edited by D. Diamond, X. tao, G. tröster Mater. Res. Soc. Symp. proc. 920, 0920-S01-05, 2006.
ampleman, G., Brousseau, p., thiboutot, S., Diaz, e., Dubois, C., «Insensitive Melt Cast explosive Compositions Containing energetic thermoplastic elastomers», patent De 601 15 327 t2, Germany, 2006.
Ganesan, R., «experimental Characterization of Interlaminar Shear Strengths», Chapter 5, Delami-nation Behaviour of Composites, ed.: S. Sridharan, Woodhead publishing, Cambridge, u.K., 2007. (2) a. Zabihollah and R. Ganesan, In: Design, Manufacturing and applications of Composites, eds.: J. lo et al, technomic, 2006.
Guo M.C., Santoni a., Heuzey M.C. , Carreau p.J., «occurrence of Surface Defects in tpo Injection Foamed automotive parts”, Society of plastics engineers (Foams topCon), Chicago, Il, uSa, 2006.
Gay, D., Hoa, S.V., «Composite Materials, Design and applications», 2nd ed., CRC press, 2007.
lo J., nishino t., Hoa S.V., Hamada H., nakai a., poon C., «Design, Manufacturing and applications of Composites», proceedings of the 6th Canada Japan workshop on Composites, toronto, published and distributed by Destech Inc, 2006.
CREPEC Rapport annuel 2006-2007 annual Report
nollet, M.-J., Chaallal, o., «Évaluation structurale des poutres en bois de l’édifice Kimberley», Rapport technique no. ÉtS-DRSR.2005-1, Remis à technisol Inc., 39 pages, 2006.
terriault, p., «Modélisation des aMF» du livre Matériaux et systèmes intelligents», Chapitre 7, Éditeurs : H. tachoire et V. torra, presses universitaires de provence, 2006.
Champliaud, H., terriault, p., «Comparison of two types of Spring Valve System Mounted on accordion Bottles«, axcan pharma (Canada), projet etS 2001-J-1337, 10 pages, 2006.
therriault, D., «Directed assembly of 3D Microvascular networks», Keynote speaker : Society for the advancement of Material & process engineering (SaMpe) eastern Canada, aerospace Manufacturing technology Centre, IaR-nRC, Montreal, QC, 2006.
ton-that M.-t., perrin-Sarazin F., Denault J., «Cellulose Filled thermoplastic Composites», uS 7,041,716 B2, 2006.
turenne, S., «Rupture d’un boulon de joint d’accou-plement», rapport technique, les expertises tracktest Inc., 2006.
turenne, S., «Rupture d’un guide de tige pour une pompe d’assèchement sur pied», Rapport technique, technorm, 2006.
69
prokoshkin, S., Khmelevskaya, I., Dobatkin, S., trubitsyna, I., tatyanin, e., turenne, S., Brailovski, V., Stolyarov, V., prokofiev, e., «thermomechanical Conditions For nanocrystalline Structure Formation and Functional properties of Severely Deformed ti-ni Shape Memory alloys», ultrafine Grained Materials IV, the Minerals, Metals & Materials Society, pp.301-306, 2006.
turenne, S., «analyse de rupture d’un tirant de machine agricole», rapport technique, les expertises tracktest Inc., juin 2006.
turenne, S., « Rupture d’un boulon de joint d’accouplement », rapport technique, les expertises tracktest Inc., mars 2006.
turenne, S., « Rupture d’un guide de tige pour une pompe d’assèchement sur pied », Rapport technique, technorm, mars 2006.
Benoît, R., Gou, M., Bellavigna, o., Vu-Khanh, t., Dolez, p., arrieta, C., nohilé, C., Ha-anh , t., «Étude exploratoire sur les phénomènes d’éclatement et d’explosion de pneus de camions lourds», Rapport R-479, Série Études et Recherches, IRSSt, 134 pages, 2006.
Vu-Khanh, t., Dolez, p., Harrabi, l., lara, J., larivière, C., tremblay, G., nadeau, S., «Caractérisation de la souplesse des gants de protection par des méthodes mécaniques et une méthode biomécanique basée sur l’électromyographie de surface», Rapport final, Soumis à IRSSt, 2006.
CREPEC Rapport annuel 2006-2007 annual Report70
CREPEC Rapport annuel 2006-2007 annual Report 71