Raine File White Model # SPLS-RFL-WH · Model # SPLS-RFL-WH Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Manufacturing Page 3 Factory No. 15548

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Manufacturing Page 1 Factory No. 15548

Date 2014-11-20 Rev. 1 Factory: DOGULU

Raine File White Model # SPLS-RFL-WH

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at www.whalenfurniture.com

Or e-mail your request to [email protected]

LOT NUMBER: DATE PURCHASED: / /

Model # SPLS-RFL-WH

Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Manufacturing Page 2 Factory No. 15548

MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Raine File White (SPLS-RFL-WH) DATE OF MANUFACTURE: December 2014 MADE IN CHINA

SPECIAL NOTE

Please read the instruction sheets completely before assembly. Examine all packaging material before discarding carton. Remove any remaining staples from the carton before discarding. Remove all parts from carton and separate into groups as indicated on part list. Please ensure all parts are included prior to assembly. Use of power tools to complete assembly is not recommended.

THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

MAXIMUM LOAD 30 lb. (13.6 kg)


M A X I M U M R E C O M M E N D E D W E I G H T L O A D S


Model # SPLS-RFL-WH


Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH. Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam

Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam

Lock faces out and points towards Cam Bolt.

3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.

4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam.

You are now ready to assemble the KD unit.

XX

FINAL

1 2 43

Model # SPLS-RFL-WH


Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Left Side Frame (1) B- Right Side Frame (1) C- Top Panel (1)

D- Fixed Shelf (1) E- Bottom Crossbar (1) F- Back Panel (1)

G- Drawer Front (1) H- Drawer Back Panel (1) I- Drawer Left Side (1)

J- Drawer Right Side (1) K- Drawer Bottom Panel (1) L- Drawer Bottom Support (1)

M- Caster Support (1) N- Guide Rail (2) O- File Hanger (2) P- 16” Ball Bearing Slides (2)

Model # SPLS-RFL-WH


Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly.

(1) Small Cam Lock (2) Large Cam Lock (3) Small Cam Bolt (4) Large Cam Bolt (4+1 extra) (18+1 extra) (4+1 extra) (18+1 extra)

(5) M8 x 30 mm Wood Dowel (6) Ø3.5 x 12 mm Screw (7) Ø3.5 x 15 mm Screw

(13+1 extra) (12+1 extra) (4+1 extra)

(8) Ø4 x 25 mm Screw (9) Ø4 x 32 mm Wood Screw (10) Handle (11) Handle Bolt (4+1 extra) (8+1 extra) (1) (1)

(12) Swivel Caster (1) (13) Cam Lock Cover (8+1 extra) Glue (1) Touch-up Pen (1)

Tools required: Phillips screwdriver and hammer (not provided).

Model # SPLS-RFL-WH


Drawer Assembling

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch.

2. Pick up the 16” Ball Bearing Slides (P) and separate the Slide Runners for the following steps. Extend the Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the Slide Runner complete out.

3. Attach the separated Slide Runners (P) to the Drawer Side Panels (I and J) respectively, using three 12 mm Screws (6) per slide runner. As shown. Make sure that the slide opening points towards the edge with two vertical through holes in a line running against.

4. Align and attach the Caster Support (M) to the bottom side of the Drawer Bottom Support (L) by using four 25 mm Screws (8) through the countersunk holes and screw into place, as shown.

5. Proceed to fasten the Swivel Caster (12) onto the Caster Support (M) with four 15 mm Pan Head Screws (7), using the pilot holes as a guide. Tighten the screws with a Phillips screwdriver.

6

JP

6

P

P

I

L

M

8

7

ML

12

Model # SPLS-RFL-WH


Drawer Assembling

6. Locate the Drawer Front (G) on a carpeted floor with the holes facing up. Securely screw four Small Cam Bolts (3) into the designated small holes as shown in the illustration.

7. Attach the Drawer Side Panels (I and J) to the Drawer Front (G) by engaging four Small Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement). Make sure that the grooves face inward and line up with each other.

8. Attach the Drawer Bottom Support (L) between the Drawer Side Panels (I and J) with the installed Caster (12) facing out, using four 32 mm Wood Screws (9). As shown.

33

3

3

1

1

G G

J

I

G

J

I

LL

J

I

9

9

Model # SPLS-RFL-WH


Drawer Assembling

9. Slide the Drawer Bottom Panel (K) into the grooves between the Drawer Side Panels (I and J) until fully inserted into the Drawer Front (G). Make sure the finished surface will face up. As shown.

10. Fasten the Drawer Back Panel (H) to Drawer Side Panels (I and J) using four 32 mm Wood Screws (9). Make sure that Drawer Bottom Panel (K) fits securely into the groove of the Drawer Back Panel (H). Tighten all the screws with a Phillips screwdriver.

9

H

J

J

I

K

H

I9

J

I

L

K

Model # SPLS-RFL-WH


Assembly Instructions

11. Turn the assembled drawer upright. Fit 2 Guide Rails (N) onto the Drawer Side Panels (I and J) with the high side facing inward. As shown.

12. Hook 2 File Hangers (O) onto the high edge of the Guide Rails (N). Slide the File Hangers front and back to accommodate letter or legal-sized folders.

13. Attach the Handle (10) to the outside of Drawer Front (G) using the provided Handle Bolt (11).

14. With the pilot holes as a guide, attach the separated Slide Tracks (P) to the slide supports on the Left and Right Side Frames (A and B) respectively, using three 12 mm Screws (6) per slide track. As shown. Make sure that the slide opening faces the front of the unit.

P

6

6

6P

P

BA

6

11

J

ON

G

I

10

O

N

Model # SPLS-RFL-WH



15. Securely screw the Large Cam Bolts (4) into the designated small holes on the Side Frames (A and B) and the Top Panel (C), as shown in the illustration.

16. Attach the Fixed Shelf (D) to the Back Panel (F) with two Wood Dowels (5). As shown. Make sure that the molding of Fixed Shelf (D) will face the bottom of the unit.

F

D

5

5

4

4

4

A B

4

4

4

4

4

C

Model # SPLS-RFL-WH



17. Insert four Wood Dowels (5) into the middle end holes of the Fixed Shelf (D) and the Back Panel (F) at both ends. DO NOT put dowels into the Cam Bolt holes.

18. Align the inserted Wood Dowels (5) on last assembly with the drilled holes on the Right Side Frame (B) and press them together. Secure the unit in place by engaging four Large Cam Locks (2).

19. Align and attach the Bottom Crossbar (E) to the Right Side Frame (B) using two Wood Dowels (5) and two Large Cam Locks (2). As shown. Make sure that the cutout of Bottom Crossbar (E) points towards the front of the unit and the Cam Locks will face the floor.

20. Repeat the same procedure to attach the Left Side Frame (A) at the opposite end.

21. Insert three Wood Dowels (5) into the top middle holes of the Side Frames (A and B) and the Back

Panel (F). Position the Top Panel (C) onto the inserted Wood Dowels (5) and attach it in place by engaging six Large Cam Locks (2). As shown.

5

5

2

2

F

D

E

A

B

5

5

2

2

22

5

5

5

5

2

C

F

A

B

5

Model # SPLS-RFL-WH



22. Stand the unit upright.

23. Plug the Cam Lock Covers (13) onto the visible Cams Locks to conceal the Cams.

24. Extend the Sliding Tracks on the Side Frames (A and B) all the way forward (including ball bearing cart). Then align the Slide Runners on the assembled drawer with the Slide Tracks and push the drawer carefully inside until it stops.

NOTE: If the drawer does not go in smoothly, please take it out and repeat the step. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the ball bearing slide up on one side and down on the other side, and then pull it completely out.

13

C

AB

J

G

I

Model # SPLS-RFL-WH


Care and Maintenance

Use a soft, clean cloth that will not scratch the surface when dusting.

Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.

Using solvents of any kind on your furniture may damage your furniture’s finish.

Never use water to clean your furniture as it may cause damage to the finish.

Always use coasters under beverage glasses and flowerpots.

Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.

Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.

Stains or marks from crayons or ink markers will be difficult to remove.

In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.

Further advice about wood furniture care It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.

We hope you enjoy your purchase for many years. Thank you for your purchase!

QUALITY GUARANTEE

We are confident that you will be delighted with your Whalen Furniture purchase.

Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.

This warranty gives you specific legal rights and you may also have other rights which vary from province to province (state to state).

Customer Service: 1-866-942-5362 8:30 a.m. - 4:30 p.m., PST, Monday to Friday

www.whalenfurniture.com

IF Y

OU

NE

ED

TO

OR

DE

R A

NY

RE

PL

AC

EM

EN

T P

AR

TS

, PL

EA

SE

US

E T

HE

LIS

T B

EL

OW

Raine F

ile White (S

PL

S-R

FL

-WH

)

*SP

LS

-RFL

-WH

-1-TP

Top P

anel*S

PL

S-R

FL-W

H-17-S

CL

Sm

all Cam

Lock

*SP

LS

-RFL

-WH

-2-LS

FL

eft Side Fram

e*S

PL

S-R

FL-W

H-18-L

CL

Large C

am L

ock

*SP

LS

-RFL

-WH

-3-RS

FR

ight Side Fram

e*S

PL

S-R

FL-W

H-19-S

CB

Sm

all Cam

Bolt

*SP

LS

-RFL

-WH

-4-FSFixed S

helf*S

PL

S-R

FL-W

H-20-L

CB

Large C

am B

olt

*SP

LS

-RFL

-WH

-5-BC

Bottom

Crossbar

*SP

LS

-RFL

-WH

-21-M8x30W

DM

8 x 30 mm

Wood D

owel

*SP

LS

-RFL

-WH

-6-BP

Back P

anel*S

PL

S-R

FL-W

H-22-12S

Ø3.5 x 12 m

m S

crew

*SP

LS

-RFL

-WH

-7-DF

Draw

er Front*S

PL

S-R

FL-W

H-23-15S

Ø3.5 x 15 m

m S

crew

*SP

LS

-RFL

-WH

-8-DL

SP

Draw

er Left S

ide Panel

*SP

LS

-RFL

-WH

-24-25SØ

4 x 25 mm

Screw

*SP

LS

-RFL

-WH

-9-DR

SP

Draw

er Right S

ide Panel

*SP

LS

-RFL

-WH

-25-32WS

Ø4 x 32 m

m W

ood Screw

*SP

LS

-RFL

-WH

-10-DB

PD

rawer B

ack Panel

*SP

LS

-RFL

-WH

-26-HH

andle

*SP

LS

-RFL

-WH

-11-DB

PD

rawer B

ottom P

anel*S

PL

S-R

FL-W

H-27-22H

B22 m

m H

andle Bolt

*SP

LS

-RFL

-WH

-12-DB

SD

rawer B

ottom S

upport*S

PL

S-R

FL-W

H-28-S

CS

wivel C

aster

*SP

LS

-RFL

-WH

-13-CS

Caster S

upport*S

PL

S-R

FL-W

H-29-G

Glue

*SP

LS

-RFL

-WH

-14-16BB

S16” B

all Bearing S

lides*S

PL

S-R

FL-W

H-30-C

LC

Cam

Lock C

over

*SP

LS

RFL

WH

15G

RG

uideR

ail*S

PL

SR

FLW

H31

TU

PT

ouchup

Pen

SP

LS

-RFL

-WH

-15-GR

Guide R

ailS

PL

S-R

FL-W

H-31-T

UP

Touch-up P

en

*SP

LS

-RFL

-WH

-16-FHFile H

anger*S

PL

S-R

FL-W

H-C

HC

omplete H

ardware

Documents

Raine File White Model # SPLS-RFL-WH · Model # SPLS-RFL-WH Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Manufacturing Page 3 Factory No. 15548