Rack Mount Enclosures · 2018-08-22 · n Standard patch panel mounting to fit 19” rack. n Includes mounting and cable/fibre management hardware kit. n Rugged steel construction

Rack Mount Enclosures

Fibre Optic Rack Mount Enclosure: SLIDING

rfi.com.auCopyright RF Industries Pty Ltd 2018. Subject to change without notice.

Asia Pacific | EMEA | Americas

Part Number A1US A2US A3US

Description 1RU SLIDING ENCLOSURE, GRAY 2RU SLIDING ENCLOSURE, GRAY 3RU SLIDING ENCLOSURE, GRAY

Dimensions (in) H x W x D 1.8 x 19 x 11.9 3.5 x 19 x 11.9 5.2 x 19 x 11.9

Weight (kg) 3.4 4.2 5.6

Max. no. of adapter plates 2 4 8

Splice Capacity 48 96 192

Max Ingress Cables 2 each side 4 each side 6 each side

Material / Finish Grey powder coated steel Grey powder coated steel Grey powder coated steel

Accessories Supplied with mounting and Cable/fibre management hardware kit

OCC’s rack mountable sliding fibre optic enclosures support the use of both indoor and outdoor fibre cable types. Suitable for patching or housing direct termination or splicing of up to 192 fibre cores. The range has various sizes and panel arrangements available and is perfectly suited for a wide range of applications.

Features

nAvailable in 1RU, 2RU and 3RU sizes.

nVariety of front panels.

nHigh quality, long lasting sliding mechanism

nRodent-resistant back panel is available.

nFibre management, connectivity and distribution up to 192 fibres.

nAccommodate up to 8 snap-in OCC angled panels.

nStandard patch panel mounting to fit 19” rack.

nIncludes mounting and cable/fibre management hardware kit.

nRugged steel construction with durable powder coat finish, Grey colour.

nSuitable for various unterminated and pre-terminated cables.

Preliminary Spec Sheet

ApplicationnHigh fibre density applications in the 2RU and 3RU versions

nFusion splicing

nSuitable for fusion splicing, direct termination and pre-terminated cables

Technical Specifications

P-43336-1

Rack Mount Enclosures

Wingback Rack Mount Enclosure: FIXED



OCC’s newly redesigned fiber termination enclosure introduces new features to a well-established product line, making it easier to work with and more aesthetically pleasing while maintaining the ruggedness expected from OCC. This fiber optic enclosure allows for easier terminations and greater capacity. The new wingback enclosure also incorporates features designed to reduce installation time and cost. This enclosure has been specifically designed for the management of MTP or pre-terminated cable systems. It is, therefore, ideally suited in the Data Centre, or any environment requiring quick and efficient connect and disconnect.

Features

Designed with features that benefit both the end user and the installer, OCC’s new enclosure offers the following:

nAvailable in 1RU size.

nFibre management, connectivity and distribution up to 48 fibres.

nAccommodates 2 snap-in OCC angled panels for various connector types and densities.

nSuitable for shallow racks where in-rack cable movement is problematic

nRugged steel construction with durable powder coat finish, Grey colour.

nVariety of front panels.

nWing-back design reduces fiber stress and provides support for proper cable bends and efficient cable management.

nStandard patch panel mounting to fit 19” rack.

nIncludes mounting and cable/fibre management hardware kit.

nAngled left and right rear cable entry ‘wings’ for easy cable access and fixing.

nRemovable lid for easy installation and access.

nSlotted rear wing for cable tie fixing, No glands required.

nSuitable for various unterminated and pre-terminated cables

nDirect termination of tight buffer and loose-tube cables

nInternal fibre clips for managing incoming cables.


ApplicationnPre-terminated loose tube or riser cables

nDirect termination of tight buffer cables

nData centres and SAN environments requiring MTP or pre-terminated cabling solutions

Technical Specifications

P-43336-1

Part Number A1UC-W

Description 1RU FIXED ENCLOSURE, NO DRAWER, WINGBACK, GRAY

Dimensions (in) H x W x D 1.8 x 19 x 11.9

Weight (kg) 2.5

Max. no. of adapter plates 2

Splice Capacity 48

Material / Finish Grey powder coated steel

Accessories Supplied with mounting and Cable/fibre management hardware kit


Asia Pacific | EMEA | Americas P-43336-1

Part Number Description Photo

APN-SCS12 12 PORT ANGLED SC SIMPLEX LOADED PANEL

APN-SCD12 12 PORT ANGLED SC DUPLEX LOADED PANEL

APN-LCD24 24 PORT ANGLED LC DUPLEX, LOADED PANEL

APN-SCAS12 12 PORT ANGLED SC SIMPLEX UNLOADED PANEL

APN-SCAD12 12 PORT ANGLED SC DUPLEX UNLOADED PANEL

APN-LCAD24 24 PORT ANGLED LC DUPLEX UNLOADED PANEL

APN-STAS12 12 PORT ANGLED ST SIMPLEX UNLOADED PANEL

APN-BLANK FLAT BLANK PANEL

ADAPTOR FRONT PANELS

Wingback Rack Mount Enclosure



Asia Pacific | EMEA | Americas P-43336-1




ALCD-SM-BL ADAPTOR LC DUPLEX SM UPC BLUE

ALCD-MM-BE ADAPTOR LC DUPLEX MM UPC BEIGE

ALCD-MM-AQ ADAPTOR LC DUPLEX MM UPC AQUA

ASCS-SM-BL ADAPTOR SC SIMPLEX SM UPC BLUE

ASCS-MM-BE ADAPTOR SC SIMPLEX MM UPC BEIGE

ASCS-MM-AQ ADAPTOR SC SIMPLEX MM UPC AQUA

ASCD-SM-BL ADAPTOR SC DUPLEX SM UPC BLUE

ASCD-MM-BE ADAPTOR SC DUPLEX MM UPC BEIGE

ASCD-MM-AQ ADAPTOR SC DUPLEX MM UPC AQUA

ASTS-SM ADAPTOR ST SIMPLEX SM YELLOW

ASTS-MM ADAPTOR ST SIMPLEX MM RED

FIBRE OPTIC ADAPTORS


A24S RACK MOUNT FIBER SPLICE TRAY 12/24




FOSS45MM FBR SPLICE PROTECTRS 45MM LONG



The optional fibre optic components you can trust including:

Fibre Optic Components

nRack Mount Sliding Enclosures 1RU/2RU/3RU

nDin Rail Enclosures

nWall Mount Boxes

nPigtails

nPatch Leads

P-43336-1



OCC offers user friendly Rack mount splice trays for cable management and radius control.

SPLICE TRAYS

nCleaning Consumables

nFast Connectors and Installation Tools

nLoose Tube and Tight Buffered Cable

nPre-terminated Cables

Documents

Rack Mount Enclosures · 2018-08-22 · n Standard patch panel mounting to fit 19” rack. n Includes mounting and cable/fibre management hardware kit. n Rugged steel construction