Upload
madhavan-ram
View
215
Download
0
Embed Size (px)
Citation preview
7/27/2019 RA Guidance
1/31
Health and safety services
Risk assessment
Guidance
7/27/2019 RA Guidance
2/31
Contents
IntroductionRisk assessment overviewProtective and preventative measuresWho can carry out a risk assessment?Risk assessment logStarting the risk assessment
Which form should I use?Planning the risk assessment processFlowchart of the risk assessment processWhat should be risk assessed?
The risk assessment processStep 1 - Identifying hazards and related activitiesStep 2 - Identifying people at risk of harm
Step 3 - Analysing the riskStep 4 - Preventative control measuresStep 5 - Implementing and prioritising actionStep 6 - Communicating the findings
Monitoring and reviewingDynamic risk assessment
Training identified in risk assessmentInstructionKeeping recordsFAQs
Forms
Appendix 1 - General risk assessment form
Appendix 2 - Risk assessment log
7/27/2019 RA Guidance
3/31
Introduction
Risk assessments are central to managing health and safety in the University, andthis guidance provides practical information on how to carry out risk assessmentsand risk assessment logs.
A risk assessment can help you organise and manage risks in three stages:
1. Identifying underlining hazards2. logically determining the risk of harm3. Considering what could be done to reduce or eliminate that risk
A main principle of risk assessments is they should take place before any changesare made. Risks should be assessed and control measures put into action beforenew work is introduced or systems are changed. The process should influencebudgets and allocation of resources, rather than being an afterthought when thedecisions have already been made.
Risk assessment overview
Whose responsibi lity is i t to manage the risk assessment process?The regulation of tasks in schools and services means mainly managers areresponsible for ensuring risk assessments are in place. They must ensure suitableand sufficient risk assessments are carried out and regularly reviewed, and thatrecords are kept for work in their areas of responsibility.
Risk assessment tasks may be delegated as long as the risk assessor is competent.
What should be risk assessed?Risk assessments must be carried out for all work that includes significant risks.
Trivial risks can be ignored. You can learnmore about what risks to assess later in
this guidance.
How often should the assessment be reviewed?Risk assessments must be reviewed regularly:
Every two years as a minimum
Immediately following a serious incident or where there is reason to suspect it
7/27/2019 RA Guidance
4/31
and as assessments produced by different assessors are in the same format, thismakes the interpretation of findings more straightforward.You can learn more about
forms later in this guidance.
Protective and preventative measures
Control measures can be preventative (to prevent the hazard arising in the firstplace) or protective (to protect employees from existing hazards). Of course,measures identified in the risk assessment must be put into action if the process isto have any value.
Risk assessments can produce a number of possible control measures but the finaldecision is a trade off between the level of risk , cost and the time and effort ofapplying the control. It is crucial to choose and implement the most appropriatemethod of risk control.
The choice of control should be guided by the hierarchy of risk control principles:
1. Elimination2. Substitution3. Isolation4. Reduction5. Information, instruction, training and supervision6. Personal protective equipment.
Where more than one option is available for a similar degree of risk control, considerwhich is the most cost effective option. You can find more information about thehierarchy of risk control later in this guidance.
In the event of an accident or incident, the relevant risk assessments will bescrutinised. Failure to implement control measures without adequate documented
justification (or failure to ensure that risk assessments are carried out at all) could behighlighted as a potential contributory factor in the incident.
If the risk assessor is not the manager, it is stil l the managers responsibili ty totake decisions based on the findings of the assessments and to implementthose decisions.
7/27/2019 RA Guidance
5/31
Who can carry out a risk assessment?
The University will provide training for staff carrying out risk assessments - the type oftraining will depend on the complexity of the risk assessments.
To untrained or inexperienced managers, undertaking risk assessments can lead toconfusion, and even fear of health and safety matters. This is why only a "competentperson" should carry out the assessments.
A competent person is someone who has knowledge of the:
Work involved through personal experience
Principles of risk assessments and preventing risks
Specific subject under assessment, through training for example
Risk assessor courses are currently provided centrally, and managers who havepassed this course should be competent to carry out a basic risk assessment.Additional professional advice is available from health and safety services for the
more complex and technical areas of risk assessment such as electricity, noise andvibrations.
Job-specific health and safety competencyOn some occasions, health and safety skill is an integral part of the role. Additionalhealth and safety training is required where the job involves:
Specific technical and health and safety input
Reviewing other peoples risk assessments
Risk assessment log
Each faculty, school or service should create and maintain an up-to-date riskassessment log. This is a central record of all the risk assessments carried out, andyou can see an example of the risk assessment log in Appendix 2
The purpose of the risk assessment log is to enable information to be exchangedwithin schools and across the University, avoiding duplication of effort and creatingconsistency. The log will also:
Identify common assessments, allowing best practice to be shared through aconsistent approach and easy exchange of information
7/27/2019 RA Guidance
6/31
Starting the risk assessment
Remember, risk assessments must be carried out and the appropriate controlmeasures put in place before any new activity, task or process starts, and before anychanges to existing working practices, equipment or personnel are implemented.
Which form should I use?In order to keep consistency across the University and within schools and services,the form for recording assessments has been agreed as a minimum standard. If thisform is filled in correctly, the assessment will meet the legislative requirements ofbeing "suitable and sufficient".
The form should be used for all risk assessments except for the following whereother specific forms are available.
Fire
Display screen equipment
Manual handling
Control of substances hazardous to health (COSHH)
First aid Field trips
Genetic modification
Ionising Radiation
Lasers
Lone working
Pregnant workers
Some of these specific risks may be included in a general risk assessment, forexample manual handling and fire may be identified in a general office riskassessment.
Blank risk assessment forms are available in paper format and electronically fromhealth and safety services. You can also download the blank risk assessment formfrom Appendix 1
Planning the risk assessment processWhen planning the process for risk assessments, consider the following points:
Is the risk assessor competent?
Is there any activity-specific or technical information that could help with thet? If t t t h lth d f t i h h
7/27/2019 RA Guidance
7/31
A good risk assessment will have input from all the team involved and it is a good
idea to include health and safety representatives (union and non union). In somecases you might need professional help from health and safety services or theoccupational health service.
Flowchart of the risk assessment process
Plan the process
Identify any hazards
Yes
Reviewfollowing
implementation
Y
Can the
hazard beeliminated?
No
Estimate the risk
Eliminate
hazardRecord End
No Prepare andimplement risk
control plan
Is the risktolerable?
7/27/2019 RA Guidance
8/31
What should be risk assessed?The types of assessment listed below show the diversity of hazards, but this list is not
exhaustive. Assessors can select the type of risk assessment that best suits theirservice or use a combination. Risk assessments can be cross-referenced to avoidreplicating information, so an assessment for aqua-aerobics would not need tocontain all the information in the "running and maintenance of a swimming pool"assessment.
Equipment specific
Use of hand tools
Use or maintenance of electrical items Still saw
Person specific
New and expectant mothers
Young workers Employees with a disability
Hazard specific
Fire or explosion
Electricity
Noise or vibration Heat or cold
Radiation
Lighting
Vehicle movement
Compressed air
Falling objects
Slippery, uneven or worn floors Obstructions and projections
Repetitive hand or arm movements
Handling sharps - broken glass, razors
Violence and aggression
Activ ity specif ic
Cash handling
Events
Educational visits Organised trips
Minibuses
Working at heights - eg. Using ladders
Reception duties
Cleaning
Office moves
Fieldwork
Job specific
Lecturer Bar attendant
Porter
Cleaner
Process Specific
Building or environment specific
Swimming pool Out of hours working
Office
Studio
Workshop
Laboratory
7/27/2019 RA Guidance
9/31
Legislation and guidance state that you can ignore trivial risks or normal life risks,
unless the work activity compounds the risk or significantly alters it.
For example an assessment is not required for normal use of public transport, but isrequired if people transport large quantities of cash or prescription medicines as partof their job. Similarly loading a dishwasher at home is a normal life risk but loading anindustrial machine in the kitchen at the University would be a different proposition.
Observing the activity in action is likely to give a more accurate risk assessment thantreating it as a desktop exercise. Managers should also use their knowledge andexperience of the staff carrying out the work when assessing them.
The risk assessment process
If you are completing a risk assessment, follow this simple process:
Step 1 -Look for hazardsStep 2 -Decide who might be harmed and howStep 3 - Analysing the riskStep 4 - Record the findings and put measures in place to control the risksStep 5 - Implementing and prioritising actionStep 6 - Communicate the findings to staff
Step 1 - Identi fying hazards and related activit iesThe definition of a hazard is "something that has the potential to cause harm"including ill health, injury, loss of product and/or damage to plant and property.
Examples of hazards
Violence Poor housekeepingMoving parts of machinery Noise
Work at height Ejected materials
Pressure systems Vehicles
Electricity Low or high temperatures
7/27/2019 RA Guidance
10/31
Step 2 - Identifying people at risk of harm
Identify groups or people who may be affected.
Examples of people at risk
Employees Members of the public
Temporary workers Tenants
Students Volunteers
Children Customers
Shift workers Cleaners
Contactors Visitors
Relief workers
Pay particular attention to vulnerable people
Examples of vulnerable people:
New or expectant mothers Young people
Staff or customers with learningdifficulties
Inexperienced staff
Staff, customers or visitors withdisabilities
Lone workers
Non-English speakers Students
If the risk assessment is job-specific, use the individual's job title, not their name. Thismeans the assessment is still relevant if the employee leaves the University.
Possible outcomesHow could people be harmed by these risks?
Examples of possible outcomes
Cuts and abrasions Personal health problems
Broken or dislocated bones Absorbing substances
Sprains and strains Asphyxia
7/27/2019 RA Guidance
11/31
Step 3 - Analysing the risk
To help analyse risk, the University uses a matrix scoring system. Numerical scoresare given to the severity and likelihood of risks and these scores are multiplied to geta rating for the risk. This means the risk rating is a measure of the likelihood thatharm from a particular hazard will occur, taking into account the possible severity ofsuch an occurrence.
Risk = Severity x Likelihood
For the initial risk evaluation, consider the risks identified in the worst case scenariobefore any controls are applied.
Electricity is a hazard, for example - It can kill but the risk of it doing so in an officeenvironment is low providing the components are insulated, the metal casing is
properly earthed and appliances are used correctly and tested.
Severity of the hazardThe severity is expressed in terms of the effect on the person, whether injury or illhealth, and ranging from minor injury to death. Factors affecting the severity of theeffects include:
The number of people who may be affected
Any individuals particularly at risk because of disabilities or medical conditions
The properties of materials, speeds, heights and weights
The amount and type of energy involved.
Hazard severity Defin itionPointsrating
Very highCausing multiple deaths and widespreaddestruction eg. fire, building collapse.
5
High Causing death, serious injury or permanentdisability to an individual.
4
Moderate
Temporary disability causing injury or diseasecapable of keeping an individual off work for threedays or more and reportable under RIDDOR(Reporting of Injuries Diseases and Dangerous
3
7/27/2019 RA Guidance
12/31
Likelihood of the risk
The likelihood should be based on the worst case scenario, ranging from a remotepossibility to the inevitable. Factors affecting the likelihood include:
Number of times the situation occurs
Location of the hazard
Duration of the exposure
Environmental conditions
Competence of the people involved and
The condition of equipment.
Hazardlikelihood
DefinitionPointsrating
Inevitable
If the work continues as it is, there is almost 100%certainty that an accident will happen, for example:
A broken stair or broken rung on a ladder
Bare, exposed electrical conductors
Unstable stacks of heavy boxes
5
Highly likelyWill happen more often than not. Additional factorscould precipitate an incident but it is still likely tohappen without this additional factor.
4
PossibleThe accident may occur if additional factorsprecipitate it, but it is unlikely to happen withoutthem.
3
Unlikely This incident or illness might occur but theprobability is low and the risk minimal.
2
Remotepossibility
There is really no risk present. Only under freakconditions could there be any possibility of anaccident or illness. All reasonable precautions havebeen taken - This should be the normal state of theworkplace.
1
Risk ratingBy multiplying the scores for the severity and likelihood, the risk is given a ratingranging from 1 (no severity and unlikely to happen) to 25 (just waiting to happen withdisastrous and wide spread results).
7/27/2019 RA Guidance
13/31
Step 4 - Preventative cont rol measuresMeasures to control risks should be fully integrated into procedures, equipment and
design of work. This will ensure health and safety requirements are satisfied as wellas benefiting the quality of service and output.
An essential part of the assessment is to look at what controls are already in placeand judge whether or not they are adequate. For example, do they:
Meet legal requirements?
Apply best practice or recognised industry standards? - precautions that are inplace should be referenced to the manufacturers manual and approved codesof practice/guidance notes from the Health and Safety Executive. (If unsurecontact health and safety services).
Apply upto-date technology?
Reduce risk as necessary?
For many areas of health and safety, best practice guidance documents are availablewhich identify the relevant controls necessary. In this case the relevant publications
should be cross referenced in the risk assessment.
The hierarchy of controlControl measures identified by the risk assessment, whether protective orpreventative, must be implemented in line with the following hierarchy of control. Inmany cases a combination of control measures will be needed.
Elimination - is it possible to avoid the risk altogether? (eg. requesting adelivery service to an office instead of reception to prevent staff from manualhandling.)
Substitution - change the way you do the work, but take care not to introducenew risks (eg. using a safer chemical).
Isolation - combat risks at the source and prevent access to the hazard (eg.guarding machinery).
Reduction - reduce the number of employees at risk or reduce the extent of
exposure. Use information (written procedures, safe systems of work), instruction,
training and supervision - ensure employees understand what they must doand when, how they must do it and what activities are prohibited.
Use personal protective equipment, but only as the last resort and only afterall other measures have been implemented
7/27/2019 RA Guidance
14/31
Step 5 - Implementing and prioritising action
Once any control measures have been identified, management must decide whataction, if any, to take based on the recommendations. For high risk activities thiswould include a decision about whether the work should actually take place.
Where extra measures are needed, establish clear timescales, responsibilitiesand resources for carrying out the controls. For large events or where a rangeof measures is required an action plan may be needed, giving further detailson the programme for putting the controls into action.
Where no further measures are needed, documented reasons are required.
Where it is impossible to put all control measures into action at the time ofassessment, adequate steps must be taken in the meantime to minimise risks.
In some cases, managers and staff may not agree on the proposed controlmeasures. If the relevant senior manager is confident the control measures in placeare acceptable, they should sign off the risk assessment. In this case the activity
should be closely monitored and records of any correspondence should be kept.
If an incident happens that is related to the risk assessment, it is necessary toreassess the risks and put further precautions in place if possible. If the manager isconcerned about the level of risk but does not have adequate resources to combat it,the matter should be referred to the dean, director or head of school or service whoshould sign off the assessment.
Step 6 - Communicating the findingsInformation on risks and control measures identified by the risk assessment shouldbe communicated to employees and others as appropriate - Make copies of riskassessments available to all the employees concerned.
The completed risk assessment should provide clear information about hazards, risks
and control measures to the employees carrying out the work. Further direction fromsupervisors may also be required to ensure measures are actually implemented andunderstood in the context of the particular work and that the measures are effective.
This communication must be understandable by the audience and may require theuse of photographs, diagrams or a translator. You could use the information in the
7/27/2019 RA Guidance
15/31
Information provided to employees and others involved in the work should include:
The nature and extent of risks, including:o Factors that may influence risko Factors that may increase risk
The control measures to be adopted, includingo Reasons for the measureso How to use them properlyo What to do and who to contact if things go wrong or change
significantly
The reasons personal protective equipment (PPE) is requiredo Circumstances when PPE is requiredo Limitations of PPEo Arrangements for issuing, using, storage and replacing PPE
Monitoring and reviewing
It is a management responsibility to monitor the effectiveness of the measures on anongoing basis. As part of the assessment process a target date for reviewing theassessment must be set.
Risk ratingscore
Action Review recommendation
1 - 4Broadly acceptable - No actionrequired
Every 1-2 years
5 - 9Moderate - reduce risks ifreasonably practicable
Every 6-12 months
10 -15High risk - priority action to beundertaken but interimarrangements required immediately
After interim arrangementsevery 3 months
16 -25Unacceptable - action must betaken IMMEDIATELY
Immediately
7/27/2019 RA Guidance
16/31
The following events could mean an assessment needs reviewing:
If there is a significant change like a new machine or new work process
Investigation into an accident Information from monitoring incident report forms and absence records
Results of safety inspections
New information about the hazards
Changes to legislation
Increased number of defects or faults reported
Departmental restructure
If it is suspected to be no longer valid.
Dynamic risk assessmentIn some cases unexpected or temporary changes may require amendments to bemade to control measures - A change in weather conditions for example, or if theheating breaks down.
If these changes happen there is no need to carry out a new assessment, just record
any changes on the risk assessment form.
Training identified in the risk assessmentAs part of the control measures, the risk assessment will be used to determine thelevel of instruction and training needed for each activity.
Faculties, schools and services are responsible for:
Identifying the training needs of their managers and employees, and keepingappropriate records
Organising suitable training courses where they are not available on a corporatebasis.
Training, whether formal or informal, must enable employees to:
Understand hazards, risks and methods
Apply control measures
Use PPE where appropriate Implement emergency procedures.
Instruction
7/27/2019 RA Guidance
17/31
Keeping records
The risk assessment forms and any associated documents should be filed for easyretrieval and reference. They should be kept for a minimum of three years after beingsuperseded or after work has stopped, whichever is the earlier. The original signedrisk assessment should be kept in the teams health and safety file.
Employee-specific risk assessments such as pregnant workers assessments and
disability risk assessments should be kept on personnel files.
In the event of an incident that results in a medium or high level investigation, therelevant risk assessment should be attached to the sentinelincident report form before it is sent to health and safety services. They will then be ina position to provide any extra control measures.
Risk assessment - Frequently asked questions
1 - What is the difference between hazard and risk?2 - How do I know I have identified all the hazards?3 - How do I know if the risk is serious or not? How do I rate the risk?4 - What should be recorded in the written risk assessment?5 - Am I competent to carry out risk assessment? What does competent mean?
6 - When do I need to do a risk assessment?7 - Can I use electronic means of recording my risk assessment?8. Do I have to use the Universitys forms? What do I do if they dont suit mycircumstances?9 - Do I have to transfer all my existing risk assessments onto the new forms?10 - How can I avoid excessive paperwork for one-off or repeated activities?11 - How do I use generic risk assessments?12 - What is an action plan?13 - How do I decide what controls to use?14 - How far do I need to go to control the risks?15 - How do I know if the controls are adequate?16 - How do I make sure the controls are implemented?17 - What do I do if the risk assessment shows that health surveillance might be
7/27/2019 RA Guidance
18/31
1 - What is the difference between hazard and risk?A hazard is defined as the potential to cause harm; risk is the likelihood that harm
(illness or injury) will actually occur.
2 - How do I know I have identified all the hazards?It is normally unreasonable to expect one person to identify all the hazardsassociated with a particular workplace activity. The joint involvement of supervisorsand staff is crucial, as often each individual is aware of different aspects of the taskand associated hazards. It is important to have an effective system for identifying
existing and emerging hazards. Only focus on the hazards which are likely to giverise to significant risks. This may involve:
Observations from physical inspections of the workplace, equipment and workpractices
Analysis of how activities are performed
Drawing up or using checklists to act as a prompt
Referring to generic risk assessments Discussions with your safety advisor or safety coordinator
Studying accident, incident and near miss reports
Reference to specific legislation
3 - How do I know if the risk is serious or not? How do I rate the risk?All risk assessments are subjective to some extent.
However, the University does have a preferred model for risk assessments whichshould enable all staff to work towards a consistent approach. This model will beused in training courses, and will be used in future by health and safety services toproduce their generic risk assessments.
The model refers to other rating systems such as a 5 x 5 matrix, which will give
numerical assessments of risk. Please note however that there may be cases wherelow risks can be further reduced by introducing simple additional measures that arenot costly.
4 - What should be recorded in the written risk assessment?
7/27/2019 RA Guidance
19/31
5 - Am I competent to carry out risk assessment? What does competentmean?
A competent person is someone with the skill, knowledge and practical experience ofthe work activity under consideration. They may also need training or additionalinformation about legal obligations, or the employers own system of risk assessment.
The competent person need not be an 'expert' but should be aware of their limitationsand when to seek help. Contact health and safety services for details of training inrisk assessment.
6 - When do I need to do a risk assessment?Before the activity commences!
Only by completing the assessment before the activity commences can you be sureto consider all the present or potential risks. Only then can suitable control measuresbe put in place to make the activity safe, and suitable personal protective equipment
(PPE) be selected and provided.
7 - Can I use electronic means of recording my risk assessment?Both paper and electronic means of recording your assessments are acceptable.What is important is that they are given, and if necessary explained, to those involvedin the work or activity. You should also comply with your school arrangements forkeeping central records of what risk assessments have been done. Electronic copies
have the advantage of the template being available off the web, that information iseasily inserted or altered and that they can be made more readily available to thosewho may wish to inspect or audit your records.
8 - Do I have to use the Universitys forms? What do I do i f they dont suit mycircumstances?
You dont have to use the Universitys forms, but if you do you may find that a lot ofthe foundation work has been already done for you and that the factors to beconsidered will already be highlighted. You may also find it easier to respond torequests for documents during audit processes.
You are encouraged to use this format but you may need to tailor it to more readily
7/27/2019 RA Guidance
20/31
9 - Do I have to transfer all my existing risk assessments onto the new forms?
Throughout the University there are numerous risk assessment formats and methodsof recording the outcome from different methods employed by schools and services.
This situation will increase the likelihood of confusion and consequently errors andincidents. This is a greater problem if a school or services uses multiple formats toassess and control risks associated with the same activity, particularly when peoplemove between faculties or campuses.
It is preferable for auditing and reviewing purposes that risk assessments are in asimilar format, as this will greatly reduce the time taken to undertake the task andincrease accuracy. It is recommended that a common format of risk assessment isused in each school or service
Where numerous assessments already exist, this transfer may be carried outgradually, following an initial check for duplication of assessments. Where the
potential for confusion is identified, these risk assessments must be prioritised forurgent review.
As each assessment is revised and updated, and as new risk assessments aredeveloped, the University risk assessment formshould be used wherever possible.
This should be completed within a maximum two year time period.
10 - How can I avoid excessive paperwork for one-off or repeated activit ies?In some circumstances it is still necessary to carry out a risk assessment, but it maynot always be necessary to write down the findings.
For example, a generic risk assessment should be developed for day-to-day activitiessuch as routine manual handling tasks. This particular assessment would take intoaccount typical lifts, the level of training and expertise the individual has, the type ofequipment available to them, and length of time and effort involved, any relevantenvironmental factors such as lighting, steps, etc.
The outcome of such a risk assessment should allow the person to recognise asituation that is beyond their capabilities, and identify when they need assistance, orwhen a more detailed assessment of the risks is required.
7/27/2019 RA Guidance
21/31
12 - What is an action plan?In the context of risk assessment, an action plan defines what should happen to
implement the outstanding control measures you have identified in your riskassessment. It will describe what steps need to be taken, by whom, and within whattimescale. The person responsible for the risk assessment will use the plan tomonitor progress towards adequate control of the risks. For example, the plan mightspecify a certain level of supervision and monitoring which the principal investigatorwill need to carry out and record the checks made.
Some action plans will describe a short term programme of work to be carried out
before an activity can take place; others may refer to improvements to systems thatare basically adequate at the moment, but where there are foreseeable maintenanceor upgrades planned over the next few months, or even years.
In a different context, an action plan can refer to emergency situations and describe acontingency plan, or the actions required to deal with situations such as:
Experiments become super critical
Chemical spillage Fire
Failure of safety controls
Significant damage to equipment
Accident and emergency procedures
List of authorised people and contact numbers.
13 - How do I decide what controls to use?The regulations require us to consider types of control in a particular order, calledthe hierarchy of controls. We must start by looking at controls that eliminate the riskaltogether (prevention). If we cannot do this, we move on to consider controls thatprovide collective protection (eg local exhaust ventilation). Only when we haveexhausted these options as far as possible, can we move onto controls that protectthe individual, such as PPE..
The general principles are: Avoid the risk altogether by elimination or substitution
Evaluate the risks which cannot be avoided
Put suitable preventative measures in place to control these risks, starting withcollective measures before considering personal protective measures
Give appropriate instruction and training to staff about the risks
7/27/2019 RA Guidance
22/31
15 - How do I know if the controls are adequate?
For some risks, specific regulations prescribe what you need to do (for exampledisplay screen equipment regulations). Complying with these (or with the HSEsapproved codes of practice) will ensure adequate control of the risks.
In other cases, there are no specific regulations or approved codes of practice to helpus define what is adequate. Here we have to consider things like industry practice,good practice or best practice (this is not necessarily the same as standard orcustomary practices!). Many industry bodies publish health and safety guidance.
For more assistance, contact the safety advisor in your school or service, your facultyhealth and safety manager or health and safety services.
16 - How do I make sure the controls are implemented?This can be done in many ways. The diligence and formality will be governed
somewhat by the degree of risk. These checks could take the form of any or all of thefollowing:
Regular reviews and examination that the identified control measures are beingadhered to and that the risk is actually being reduced.
Use of permits to work for high risk activities.
Regular inspection and monitoring of the activity.
Individuals being given a copy of the risk assessments.
Talks, training sessions or research group meetings.
Suitable and sufficient training to equip staff and students to undertake workactivities safely.
Use of checklists before work commences.
Use of authorised people (to either sign off a work method or to be present whenwork is undertaken).
Suitable degree of supervision
Spot checks of the activity.
Investigation of the causes of accidents or incidents and reports of near misses
17 - What do I do if the risk assessment shows that health surveil lance mightbe necessary?Health surveillance is a legal requirement in certain circumstances Individuals
7/27/2019 RA Guidance
23/31
To deal with such situations:1. Identify the problem and the actions required to control the risks.
2. If the risks have been created by those outside your influence then make sure theother party has considered what control measures are necessary to protect youremployees and students3. Meet to discuss how to implement the control measures4. Work should not start until the agreed control measures are in place.
19 - What should be done with a completed risk assessment?
You need to make sure everyone who could be affected by the risk is informed aboutthe risk assessment, understands the control measures, and what they need to do tomake the controls work effectively. You can do this, for example, by providing themwith copies, talking it through in team meeting or tutorials, observing practices andchecking that these are consistent with the risk assessment.
Copies of the completed risk assessment should be lodged in the school riskassessment register and kept safely until five or six years after the work has beencompleted.
20 - How do I tell people about the risk assessment? Who needs to know?It depends on the circumstances. In the simplest of cases information can be givenby word of mouth. More usually it will need to be written down and copies madeavailable. Frequently risk assessments will lead to the production of written 'safe
systems of work'. These must be readily available to people engaged in the work.
You need to tell anyone who may be affected by the risks. This includes staff andstudents, but might also include people like cleaners, estates staff or contractors orcarry out maintenance work.
21 - How long do I need to keep a risk assessment?Most risk assessments should be kept (and kept under review) for as long as theyare relevant and relate to a work activity, and then for an additional five or six years.
The reason for this is that claims for accidental injury at work can be lodged for up tothree years after the injury or effect is diagnosed, which may take some time after thework activity has ceased. Solicitors acting for the injured person and the university
7/27/2019 RA Guidance
24/31
It is good practice to review all risk assessments once a year (or perhaps once everytwo years, in low risk situations such as in many administrative departments) whether
or not you are aware of significant changes.
However, they should also be reviewed in the light of:
An adverse incident (such as an accident, near miss, ill health, dangerousoccurrence, discovery of a defect)
A change in the legislation or known good practice
As the appreciation of hazards and risks develops
Proposed changes to experimental procedures or conditions (including new
methods, new equipment) Publication of information about changing risks (such as knowledge that a
particular substance has been designated a carcinogen)
Developments suggest it is no longer valid or can be improved
Change in personnel: to reflect any change in risk due to the age, experience,sex, disability, susceptibility, physical characteristics of the people working withthe risk.
As a result of health surveillance information Monitoring of health and safety arrangements
Risk assessments and the controls applied to the risks must remain relevant to theactual activities taking place, not those assessed many years ago!
23 - Why do I need to keep a register of r isk assessments?The University standard on risk assessment places a responsibility on heads ofschools and services to establish and maintain a register of all risk assessments.
This particularly applies to risk assessments for activities that do not change dailysuch as manual handling, work at height and using of particular types of equipment.It is recognised that maintaining a register of all risk assessments may be impracticalfor some activities in certain areas such as chemistry and pharmacy, where COSHHrisk assessments are undertaken on a daily basis. Under these circumstances it will
be acceptable for these documents to be archived locally in a form which is readilyaccessible.
The benefits associated with maintaining a register include:
Consistency of risk control throughout the School/Administrative Directoratethrough maintaining a library of generic risk assessments
7/27/2019 RA Guidance
25/31
25 - How should I review my risk assessments if I find out that someone is
pregnant, or that they are new mothers or breast-feeding?If a member of staff advises you that they are pregnant then all risk assessmentsrelating to their daily work need to be reviewed and if necessary new assessmentsproduced. In some instances you will need to change control measures or workingarrangements to protect the person and unborn child. The assessment should takeinto account any medical advice received regarding the health of the employee.
Issues that should be considered include:
Physical risks including movement, posture, confined spaces, manual handling,shocks and vibration, noise, ionising radiation and non-ionising radiation
Biological and chemical agents
Working conditions, facilities, working hours, mental and physical fatigue, stress,smoking, temperature, display screen equipment, lone working, working at height,travel, personal protective equipment.
Risk assessments should also be reviewed for new mothers and mothers who arestill breast feeding.
Further guidance is available on the HSE website at www.hse.gov.uk
Appendix 1
http://www.hse.gov.uk/http://www.hse.gov.uk/http://www.hse.gov.uk/7/27/2019 RA Guidance
26/31
Health and safety services
Risk assessment form
ppe d
7/27/2019 RA Guidance
27/31
RISK ASSESSMENT FORM - SAMPLERISK ASSESSMENT FORM - SAMPLE
RISK ASSESSMENT DETAILS DEGREE OF RISK RISK RATING MATRIX
LIKELIHOOD (L)
5 Inevitable4 Highly Likely3 Possible2 Unlikely1 Remote Possibility
SEVERITY
1 2 3 4 51 1 2 3 4 52 2 4 6 8 103 3 6 9 12 154 4 8 12 16 20
LIKELIHOOD
5 5 10 15 20 25
PERSONS AT RISK
Faculty/School/ServiceTeam
Risk Assessment Title
Risk Assessment Log Reference
Date
Name of Assessors
Manager Responsible
Location
Details of Activity
Other assessments which might also be required, 9 if needed:
Manual Handling REF
COSHH REF
Personal Protective Equipment (PPE) REF Noise REF
Other REF
SEVERITY (S)
5 Very High -MultipleDeaths
4 High - Death, seriousinjury, permanentdisability
3 Moderate - RIDDORover 3 days
2 Slight - First Aidtreatment
1 Nil - Very Minor
PERSONS AT RISKEmployeesStudentsClientsContractorsMembers of the publicWork Experience studentsOther Persons
REVIEW DATESRISK
RATINGSCORE
ACTION
1 - 4 Broadly Acceptable - No action required5 - 9 Moderate - Reduce risks if reasonably practicable
10 -15 High Risk - Priority Action to be undertaken16 -25 Unacceptable -Action must be taken
IMMEDIATELY
(Page 27 of website guidance)
7/27/2019 RA Guidance
28/31
(Page 28 of website guidance)
HAZARDAND
RELATEDACTIVITIES
e.g. trip, fallingobjects, fire,
explosion, noise,violence etc.
PERSONSAT RISK
e.g. Employees,Customers,Contractors,
Members of thepublic
POSSIBLEOUTCOME
RISKRATINGBEFORE
CONTROLS
(LxS)
EXISTINGCONTROLS
e.g. Guards, SafeSystems of Work,
Training,Instruction,
Authorised Users,Competent
Persons, PersonalProtective
Equipment (PPE)
RISKRATINGAFTER
CURRENT
CONTROLS(LxS)
FURTHERCONTROLSREQUIRED?
RISK RATINGAFTER
ADDITIONALCONTROLS (LxS)
7/27/2019 RA Guidance
29/31
ACTIONED BY ACTION COMPLETEMANAGEMENT AGREED
ADDITIONAL CONTROLMEASURES REQUIRED
POSITION NAME DATEMANAGER
SIGDATE
COMMUNICATION OF RISK ASSESSMENT FINDINGS TO STAFF
METHOD YES DATE COMMENTS
Copy of risk assessment issued tostaffControls covered in team procedureissued to staffStaff Handbook issued to staff
REFERENCE OFFORMALCOMMUNICATIONTO STAFF
Other -Induction
Toolbox TalkTeam MeetingE-mail circulation
ADDITIONALMETHODS OFCOMMUNICATION
Other -
(Page 29 of website guidance)
7/27/2019 RA Guidance
30/31
COMMENTS AND INFORMATION(Use this section to record any dynamic risk assessment comments and information)
SIGNATURE OF MANAGER"The risks identified in this assessment are controlled so far as is reasonably practicable"
Do additional controls adequatelylower high risk activities to anacceptable level?
YES / NO
If NOexplain incommentsbox above
Signature: Date:
DATE OF REASSESSMENT(Every two years minimum)
ARE THERE ANY CHANGES TO THE ACTIVITYSINCE THE LAST ASSESSMENT?
SIGNATURE OF MANAGER
LOCATION OF CURRENTSIGNED RISK ASSESSMENT
(Page 30 of website guidance)
Appendix 2
7/27/2019 RA Guidance
31/31
RISK ASSESSMENT LOG - SAMPLERISK ASSESSMENT LOG - SAMPLE
RISK ASSESSMENT LOGDirectorate: Area:
Section/Team RiskAssessment
Title
VersionNo.
RiskAssessment
Category
Code/Location
RiskAssessor
Managerresponsiblefor signing
off riskassessment
Dateassessmentsigned off
ReviewDue
ReviewDate
OutstandingControls/Actions
Yes/No
Comments
Appendix 2
(Page 31 of website guidance)