ROBEX 200W-7

Standard EquipmentISO standard cab

All-weather steel cab with all-around visibilitySafety glass windowsRise-up type windshield wiperSliding fold-in front windowSliding side windowLockable doorHot & cool boxAccessory box & Ash-tray

Computer Aided Power Optimization(New CAPO) system

2-power mode, 3-work mode, 2-user modeAuto deceleration & one touch deceleration systemAuto warm up systemAuto overheat prevention system

Heater(7500 kcal/hr, 30000BTU/hr) & DefrosterSelf diagnostic systemCentralized monitoring

LCD displayEngine speedClock & Error codeGaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gaugeWarningFuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner cloggingIndicatorPower max.Preheat & Engine warming-upOne touch decel

Removable clean out screen for oil coolerDoor and cab locks, one keyTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedAutomatic swing brakeRemovable reservoir tankWater separator & Fuel pre-filter, fuel lineBoom holding systemArm holding systemCounterweight (3400 kg, 7500 lb)mono boom (5.65 m, 18’ 8”)Arm (2.9 m, 9’ 6”)Am/Fm radio and cassette

Radio remote switchConsole box tilting system (LH.)Three front working lightElectric hornBatteries (2 x 12V x 100 AH)Battery master switchStarting Aid(air grid heater) cold weatherStandard bucket(0.80 m3, 1.05 yd3)Rear - blade (610 mm x 2490 mm)Tires - dual (10.00 - 20 - 14PR)Travel alarm

Optional EquipmentAir-conditioner (5000kcal/hr, 20000BTU/hr)Sun visor for cabin insideFuel filler pump (36 /min, 9.5 USgpm) Beacon lampSafety lock valve for boom cylinder with

overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (cramshell, etc)Accumulator, work equipment lowering12 volt power supply (DC-DC converter)Electric. transducer

Various optional Armsshort arm (2.0 m, 6’ 7”)Semi long arm (2.4 m, 7’ 10”)

Various optional Buckets (SAE heaped)Narrow bucket (0.51 m3, 0.67 yd3)Light duty bucket (0.87 m3, 1.14 yd3)Light duty bucket (0.92 m3, 1.20 yd3)Light duty bucket (1.20 m3, 1.57 yd3)Light duty bucket (1.34 m3, 1.75 yd3)Heavy duty bucket (0.74 m3, 0.97 yd3)Heavy duty bucket (0.90 m3, 1.18 yd3)Heavy duty bucket (1.05 m3, 1.37 yd3)Slope finishing bucket(0.75 m3, 0.98 yd3)Rock bucket(0.87 m3, 1.14 yd3)

Cabin lightsCabin FOPS/FOG(ISO/DIS 10262)Lower frame under coverPre heating systemFuel warmerTool kitOperator suitSpecial cowling

Air vent type side door

UndercarriageRear outriggerRear dozer and front outriggerRear and front outriggerRear outrigger and front dozer

Tiers - dual (10.00 - 20 solid)

PLEASE CONTACT

www.hyundai-ce.com 2003. 12 Rev 0

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurment rounded off to nearest pounds or inches.

NEW 7 SERIES

Photo may include optional equipment.

Tier II EngineTier II Engine

WHEELED EXCAVATOR

CUMMINS B5.9-C Engine : 124 kW / 166 HPOperating Weight(STD) : 20,500 kg (45,200 lb)Bucket Capacity, SAE : 0.51 ~ 1.34 m3 (0.67 ~ 1.75 yd3)

HYUNDAI Wheeled Excavator 7 SeriesHYUNDAI Wheeled Excavator 7 SeriesThe ROBEX 200W-7 provides outstanding performance,working harder and faster in a variety of job conditions.Hyundai’s ROBEX 7 series features a comfortableoperator environment with advanced ergonomics.

Wide Cab with Excellent Visibility The cab is roomy and ergonomically designed with low noise level and good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions.

Highly Sensitive Joystick and Easy Entrance New joystick grips for precise control have been equiped with double switches.

Dial Type Engine Speed Switch and Key Switch Front Switch Panel

Hazard Parking Brake Ram Lock Outrigger & Dozer Work & TravelSteel Cover Sunroof Rise-up Wiper and Cabin Lights

Raise-up wiper has enhanced for the better front view. Cabin Lights enhance safety by brightly lightingthe surroundings during night work(optional)

Convenient Acceleration and Brake Pedal

AA

B

C

D

E

F

G

B C

E F G

D

2 3Photo may include optional equipment.

Excellent VentilationVentilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab.Sliding front and side windows provide improved ventilation.A large sunroof offers upward visibility and additional ventilation.

VisibilityEven more visibility than before, for safer, more efficient operating.

Comfortable Operator EnvironmentThe control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducingoperator fatigue. Console boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertionwhile ensuring precise operation.

Large windows allow excellent visibility in all directions.

Low noise designThe Robex 7 series was designed with low operation noise in mind.Hyundai engineering helps to keep interior and exterior noise levels toa minimum. The cab's noise levels have been additionally reduced by improvingthe door seals for the cab and engine compartments. An insulated diesel engine compartment with sound-damping materialalso reduces noise.

Easy-to-Reach Control PanelsSwitches and other essential controlsare located near the operator. Thishelps keep operator movement to aminimum, enhancing control with lessoperator fatigue.

Power boostOne touch decelerationHornOptional

Left

Right

Rear Emergency Exit WindowRear exit window is designed witheasy exit for operator's safety.

Improved Intelligent DisplayInstrument panel is installed in frontof RH console box. It is easy to check all critical systemswith easy-to-read indicators.

Deluxe Cassette andRemote Radio Control

Operating Environment

push

push

3

CAB

R

F

N

P

P

W

Switch panel(R.H)Horn buttonOption button(breaker operation)Remote radio controlClusterHour meterAccel pedalBreake pedalMulti function switch(R.H)SteeringSwitch panel(Front)Multi function switch(L.H)Safety leverJoystick control leverPower Max. buttonOne touch decel buttonDozer blade LeverAir conditioner and heater controllerFully adjustable suspension seat

Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latest ergonomic research.Reinforced pillars have also been added for greater cab rigidity.

The best working conditions in a pleasant environment.

Operator’s Comfort is Foremost. Wide Cab Exceeds Industry Standards.

Technology in Cab DesignTechnology in Cab Design

Adjustable Steering Column

60mm

30

Storage box and Cup HolderAn additional storage box and cupholder are located behind operator’sseat, and it keeps food andbeverages cool or hot.

4 5

Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric and hydraulicmalfunctions and displays them on the LCDmonitor of the cluster through error codes. Thiscontroller has the capacity to identify 48 distincttypes of errors. As the information from thisdevice, such as engine rpm, main pump deliverypressure, battery voltage, hyd. temperature, andthe state of all types of electric switches,provides the operator with a much more exactstate of machine operating condition. This makes the machine easier to troubleshootwhen anything does go wrong.

Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.

Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping overan extended period in neutral position.

One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to 1000 rpm. And then theone touch decel switch is pressed again, theengine speed recovers.

Auto Deceleration SystemWhen remote-control valvesare in neutralposition morethan 4 seconds,CPU controllerinstructs the

accel actuator to reduce engine speed to1200rpm. This decreases fuel consumption andreduces cab noise levels.

Max. Flow Cut-off SystemFor precise control and finishing work, the Max.Flow Cut-off System reduces pump flow, thusallowing smooth operation.

Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is delivered tothe actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.

Hydraulic Damper in Travel PedalImproved travel controllability & feeling byshock reducing when starting and stopping.

Advanced CAPO SystemThe advanced CAPO(Computer Aided Power Optimization) system maintains engine and mutual pumppower at optimum levels. Mode selections are designed for various work loads and maintaining highperformance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitorsengine speed, coolant temperature, and hydraulic oil temperature. Contained within the system are selfdiagnostic capabilities which are displayed by error codes on the cluster.

Automatic Engine Overheat PreventionIf the engine coolanttemperature gets toohigh, the CPU controllerlowers the engine speedand cools the engine.

Anti Restart SystemThe new system protectsthe starter from re-starting during engineoperation, even if theoperator accidentallyturns the start key again.

Power boost control SystemWhen the power boostsystem is activated,digging power increasesabout 10%. It is especially usefulwhen extra power is

temporarily needed, for instance, when digginghard earth and rock, or if the bucket teeth arestopped by a stubborn tree root.

Automatic Warming-up SystemAfter the engine isstarted, if the enginecoolant temperature islow, the CPU controllerincreases the enginespeed and automatically

increases the pump flow rate to warm up theengine more effectively.

Drive signal

Main control valve

Main reliefvalve

Power boostsolenoid valve

Travel reversesolenoid valve

Engine speedsensor

Main pump Pilot pump

EPPR valve

Drive signal

ProlixResistor

Drive signal

Pressure switch signal

P M

Engine

Fuel injectionpump

Accelactuator Hyd temp

sensor

LH controllever

Serial Communication(-)

Serial Communication(+)

Coolant temperature signal

Mot

or d

rive

sign

al

Pot

entio

met

er s

igna

l

Eng

ine

spee

d se

nsor

sig

nal

Auto deceleration pressure switch

Hyd temperature signal

Dozer

Option

Boom 1

Bucket

Travel motor

Swing

Travel

Boom 2

Arm 1

Max flow COsolenoid valve

Max flowCO valve

Drive signal

RH controllever

Accel dial signal

signalsignal

CPU controller

Coolanttemp sensor

Arm 2

P1 P2

CN-19

CN-19B

Transmission

Travel forwardsolenoid valve

Battery

CN-19A

Boom priorityvalve

Boom prioritysolenoid valve

Cluster

Accel dial

Power boostbutton

Optionbutton

One touchdecel buttonHorn

Travel lever

ADVANCED CAPO SYSTEM NEW MODE CONTROL SYSTEM

Advanced Hydraulic SystemAdvanced Hydraulic System POWER MODEH mode : High powerS mode: Standard power

USER MODEM mode: Maximum PowerU mode: Memorizing Operator’s Preferable

Power Setting

WORK MODEHeavy duty

General

Breaker

6 7

Large Toolbox & Safe FootholdsAnti-slip footholds and wide toolbox improved safety and convenience.

Powerful and PreciserSwing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action

Powerful Dozer Blade andDozer Blade Cylinder GuardLarge size blade’s plate and coverthat protect cylinder improvedefficiency of work and durability ofequipment.

Increased Higher Performance and durability

CUMMINS B5.9-C ENGINEThe four cylinders, turbo-charged, 4 cycle,charger air cooled engine is built for power,reliability, economy and low emissions.

A More Reliable Way To Reach YouDream.The Cummins B5.9-C engine has been designedwith 40% fewer parts than the competition. Thatmeans there's less that can go wrong when youneed it most. It also means fewer parts toinventory. Repairs are simplified because nospecial tools are needed for maintenance. Theweight of the machine is reduced withoutsacrificing strength.The B5.9-C engine is capable of reachingemission standards without electronic enginecontrols. You get a proven power plant thatmeets ecological concerns, without paying apremium for technology you don’t need.

Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silentoperation.The design includes bucket linkdurability and anti wearcharacteristics. Additional reinforcementplates on cutting edgesection. Reinforced bucketis made with thicker steeland additional lateral plate.

Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground andworking on wet sites through high tensile strength steel panels, with protection cover fortransmission.

Minimization of Shock andVibration through Cab MountingSystem

The application ofViscous Mountingto the cabinsupport providesthe operator witha much improved

ride. The operator work efficiency willincrease as the shock and noise level in thecabin decreases.

8 9

Cummins B5.9-C Tier II

Increased Higher Performance and durability

Reliability and Serviceability

Reliability and Serviceability

Easy to Maintain Engine ComponentsThe cooling and preheating system are provided for optimum and immediate operation,guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.

Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view of componentallows easy maintenance and repair.

Easy to Access and Battery Master SwitchBattery and master switch on equipment forehead enable to checkand maintain easily.

Centralized Electric Control Box andEasy Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the same compartmentfor easy service.

Highly Efficient Hydraulic PumpPump output and Hydraulic tank capacity havebeen increased.A pilot pump has been installed resulting inimproved control sensitivity.

Large Capacity Fuel and Hydraulic TankThe capacity of fuel and hydraulic tank isincreased to extend the working time.

Durability of structure proven throughFEM(Finite Element Method) analysis and long term durability test.

10 11

0.51 (0.67)

0.80 (1.05)

0.87 (1.14)

0.92 (1.20)

1.20 (1.57)

1.34 (1.75)

0.74 (0.97)

0.90 (1.18)

1.05 (1.37)

0.87 (1.14)

0.75 (0.98)

0.45(0.59)

0.70(0.92)

0.75(0.98)

0.80(1.05)

1.00(1.31)

1.15(1.50)

0.65(0.85)

0.80(1.05)

0.92(1.20)

0.75(0.98)

0.65(0.85)

700(27.6)

1000(39.4)

1090(42.9)

1130(44.5)

1400(55.1)

1550(61.0)

915(36.0)

1070(42.1)

1220(48.0)

1140(44.9)

1810(71.3)

820(32.3)

1120(44.1)

1210(47.6)

1250(49.2)

-

-

-

-

-

-

-

580(1280)

650(1430)

710(1570)

710(1570)

840(1850)

900(1980)

750(1650)

790(1740)

870(1920)

860(1900)

880(1940)

SpecificationsEngine

Water cooled, 4 cycle Diesel,6-Cylinders in line, direct injection,turbocharged, charge air cooled andlow emission

166 HP (124 kW) at 1950 rpm153 HP (114 kW) at 1950 rpm168 PS (124 kW) at 1950 rpm155 PS (114 kW) at 1950 rpm68.4 kgf.m(495 lbf.ft) at 1500 rpm102 x 120 mm(4.02” x 4.72”) 5,880 cc (359 cu in)2 x 12V x 100 AHNippon denso (24 V, 4.5 kW)24V, 50A

Type

Ratedflywheelhorsepower

Max. torqueBore x strokePistonBatteriesStarting motorAlternator

J1995 (gross)J1349 (net)6271/1 (gross)6271/1 (net)

SAE

DIN

Model Cummins B5.9-C

Swing system

Swing motor Axial piston motorSwing reduction 2-stage planetarySwing bearing lubrication Grease-bathedSwing brake Automatic, spring applied hydraulic releasedSwing speed 12.5 rpm

Steering System

Min. turning radius 6690 mm (21’ 11”)

Hydraulically actuated, orbitrol type steering system actuates on front wheelsthrough the steering cylinders.

Axles & Wheels

Rear axle is fixed on the lower chassisTires : 10.00-20-14PR, Dual (tube type), Option : 10.00-20, Dual (solid type)

Full floating front axles is supported by center pin for oscillation.It can be locked by oscillation lock cylinders.

Coolant & Lubricant capacity

(refilling)Fuel tank 310.0 81.9 68.2Engine coolant 35.0 9.2 7.7Engine oil 14.2 3.8 3.1Swing device 5 1.3 1.1 Axle (Front/Rear) 16.0 /16.0 4.2/4.2 3.5/3.5Hydraulic system(including tank) 270.0 71.3 59.4Hydraulic tank 180.0 47.6 39.6Transmission 3.8 1.0 0.8

Dozer blade

Outrigger

liter US gal UK gal

Undercarriage

Drives & Brakes

Drive methodDrive motorMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake

Pilot pressure operated joysticks and pedals with detachable leverprovide almost effortless and fatigueless operation.

Reinforced box - section frame is all-welded, low-stress. Rear dozer blade andoutrigger are available. A bolt-on design. Front outrigger lug is pin-on.

A very useful addition for leveling and back filling orclean-up work. Can be mounted on the rear.Indicated for max. operation stability when digging andlifting. Can be mounted on the front or the rear.

Operating weight (approximate)

Major component weightUpperstructure 8,950 kg (19,730 lb)Counterweight 3,400 kg ( 7,500 lb)Boom (with arm cylinder) 1,480 kg ( 3,260 lb)

UndercarriageOperating Weight

kg (lb)Front - outrigger+Rear-blade 20,500 (45,200)

Four outrigger 20,600 (45,400)Standard equipment

Operating weight

Operating weight, including 5.65 m (18’ 6”) boom, 2.90 m (9’ 6”) arm, PCSAheaped 0.80 m3 (1.05 yd3) backhoe bucket, lubricant, coolant, full fuel tank,hydraulic tank and the standard equipment.

Hydraulic system

Two variable displacement piston pumps 2 x 220 /min (58.1 US gpm / 48.4 UKgpm)Gear pump

Two speed axial piston motorwith brake valve

Axial piston motor with automatic brake

330 kgf/cm2 (4690 psi)360 kgf/cm2 (5120 psi) 360 kgf/cm2 (5120 psi)240 kgf/cm2 (3410 psi)40 kgf/cm2 ( 570 psi)

Installed

Boom : 2-120 85 1290 mm (4.7” 3.3” 50.8”)Arm : 1-140 100 1510 mm (5.5” 3.9” 59.4”)Bucket : 1-125 85 1055 mm (4.9” 3.3” 41.5”)Blade : 2-120 85 226 mm (4.7” 3.3” 8.9”)Outrigger: 2-130 80 427 mm (5.1” 3.1” 16.8”)

TypeMax. flowSub-pump for pilot circuitCross-sensing and fuel saving pump system

Travel

Swing

Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve

No. of cylinder-bore x rod x stroke

Main pump

Hydraulic motors

Relief valve setting

Hydraulic cylinders

Fully hydrostatic typeAxial piston motor, in-shoe design10,800 kgf (23,800 lbf)33 km/hr (20.5 mph) / 8.5 km/hr (5.3 mph)31.5 (61 %)Multi wet disc

Engine throttle

External lights

Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)

Electric, Dial type

Two lights mounted on the boom and one under the cabin

Control

NEW 7 SERIES ROBEX 200W-7

Backhoe attachmentBuckets

Arms

0.51 (0.67) 0.80 (1.05) 0.87 (1.14) 1.20 (1.57)0.92 (1.20) 1.34 (1.75) 0.74 (0.97)0.90 (1.18)1.05 (1.37)

0.87 (1.14) 0.75 (0.98)

SAE heaped m3 (yd3)

SAE heaped 2900(9’ 6”)

2400(7’ 10”)

2000(6’ 7”)Arm

Weight kg(lb)Width mm (in)

Boom

CECE heaped Without side cutters With side cutters

Capacity m3 (yd3)Recommendation mm(ft.in)

: Standard backhoe bucket: Heavy-duty : Rock bucket-Heavy: Slope finishing bucket

: Applicable for materials with density of 2000 kg / m3 (3370 lb/ yd3) or less: Applicable for materials with density of 1600 kg / m3 (2700 lb/ yd3) or less: Applicable for materials with density of 1100 kg / m3 (1850 lb/ yd3) or less

5650 (18’ 6”)

Boom and arms are of all-welded, low-stress, full-box section design. 5650 mm(18’ 6”) mono boom and 2000 mm(6’ 7”), 2400 mm(7’ 10”), 2900 mm(9’ 6”) arms are available. Buckets are all-welded, high-strength steel implements.

2900 (9’ 6”)

990 (2180)

2400 (7’ 10”)

950 (2090)

2000 (6’ 7”)

860 (1890)

Bucket digging force

Arm crowdforce

133.4 [145.5]13600 [14840]29980 [32710]

152.0 [165.8]15500 [16910]34170 [37280]

135.3 [147.6]13800 [15050]30420 [33190]

142.2 [155.1]14500 [15820]31970 [34880]

133.4 [145.5]13600 [14840]29980 [32710]

152.0 [165.8]15500 [16910]34170 [37280]

112.8 [123.1]11500 [12550]25350 [27650]

117.7 [128.4]12000 [13090]26460 [28870]

133.4 [145.5]13600 [14840]29980 [32710]

152.0 [165.8]15500 [16910]34170 [37280]

97.1 [105.9]10020 [10930]21830 [23810]

101.0 [110.2]10300 [11240]22710 [24770]

Note : Arm weight including bucket cylinder and linkage. Standard arm

Arm Length

Weight

mm(ft.in)

kg(lb)

kNkgflbf

kNkgflbf

kNkgflbf

kNkgflbf

SAE

ISO

SAE

ISO

Remark

[ ]:Power Boost

2400 mm (7’ 10”) 2900 mm (9’ 6”)2000 mm (6’ 7”)

Digging force

12 / 13

B B’ C

D

E

A

A’

F

200w-7

Dimensions & Working ranges

A

P

Q

IJ

C

D,D'

NM

H

B

E

O F

G

KL

200w-7 200w-7

Dimensions

Working ranges

Wheel baseTreadGround clearance of counterweightTail swing radiusRear-end lengthOverall width of upperstructureOverall height of capMin. ground clearanceOverall width of lower structureGround clearance of blade upDepth of blade downHeight of bladeWidth of bladeGround clearance of outrigger upDepth of outrigger downOverall width of outrigger

2800(9’ 2”)1874(6’ 2”)1305(4’ 3”)2800(9’ 2”)2765(9’ 1”)2530(8’ 4”)

3180(10’ 5”)345(1’ 2”)

2490(8’ 2”)445(1’ 6”)125(4.9”)610(2’ 0”)

2490(8’ 2”)1220(4’ 0”)

120(4.7”)3770(12’ 4”)

mm (ft in)

N

O

P

Q

Boom length

Arm length

5650 (18’ 8”)

5650 (18’ 8”)

Shipping lengthof boomShipping heightof boom

mm (ft in)

Traveling lengthof boom

Traveling heightof boom

mm (ft in)

Standard Equipment

Standard Equipment

2000(6’ 7”)

9610(31’ 6”)

3360(11’ 10”)

9620(31’ 7”)

3540(11’ 7”)

2400(7’ 10”)

9510 (31’ 2”)

3250(10’ 8”)

9540(31’ 4”)

3540(11’ 7”)

2900(9’ 6”)

9520(31’ 3”)

3410(11’ 2”)

9520(31’ 3”)

3410(11’ 2”)

ABCDD’EFGHI

J

KLM

Max. digging reach

Arm length

Boom length

Max. digging reachon ground

Max. digging depth

Max. digging depth(8' level)

2000(6’ 7”)

9110(29’ 11”)

8870(29’ 1”)

5480(18’ 0”)

5240(17’ 2”)

2400(7’ 10”)

9480(31’ 1”)

9260(30’ 5”)

5880(19’ 3”)

5670(18’ 7”)

2900(9’ 6”)

9900(32’ 6”)

9690(31’ 9”)6380

(20’ 11”)6210

(20’ 4”)

Max. vertical walldigging depth

4970(16’ 4”)

5440(17’ 10”)

5810(19’ 1”)

Max. digging height9500

(31’ 2”)9730

(31’ 11”)9870

(32’ 5”)

Max. dumping height 6670(21’ 11”)

6900(22’ 8”)

7050(23’ 2”)

Min. swing radius 3700(12’ 2”)

3620(11’ 11”)

3540(11’ 7”)

A

A’

B

B’

C

D

E

F

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

*8260*18210

*13240*29190

*11640*25660

*8260*18210

*13240*29190

*11640*25660

*4650*10250

*4980*10980

40208860

39208640

*3810*8400

*3890*8580

*4020*8860

*4190*9240

*4370*9630

*4570*10080

*4710*10380

*4620*10190

*3810*8400

*3890*8580

33707430

31506940

31406920

33507390

39208640

*4620*10190

6.85(22.5)

7.89(25.9)

8.48(27.8)

8.73(28.6)

8.67(28.4)

8.30(27.2)

7.57(24.8)

6.30(20.7)

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

Lifting Capacities

Lifting capacities

NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Rating over-side or 360 degreeRating over-front

Boom : 5.65m (18’ 6”) Arm : 2.00 m (6’ 7”) Bucket : 0.80m3 (1.05yd3) SAE heaped With 4 outrigger downLoad radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

*8320*18340

*13190*29080

*11570*25510

*4670*10300

*4990*11000

33007280

32007050

*3830*8440

*3910*8620

*4030*8880

*4190*9240

*4380*9660

*4560*10050

*4700*10360

*4580*10100

*3830*8440

32307120

27706110

25705670

25505620

27306020

32007050

43909680

6.85(22.5)

7.89(25.9)

8.48(27.8)

8.73(28.6)

8.67(28.4)

8.30(27.2)

7.57(24.8)

6.30(20.7)

Boom : 5.65m (18’ 6”) Arm : 2.00 m (6’ 7”) Bucket : 0.80m3 (1.05yd3) SAE heaped With front outrigger and rear dozer blade down.Load radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

DIMENSIONS & WORKING RANGES 14

NEW 7 SERIES ROBEX 200W-7

*5650*12460

*7340*16180

*8700*19180

*9260*20410

*9110*20080

*8210*18100

*5650*12460

*7340*16180

*8700*19180

868019140

868019140

*8210*18100

*4230*9330

*4710*10380

*5450*12020

*6180*13620

*6620*14590

*6630*14620

*4230*9330

*4710*10380

*5450*12020

558012300

544011990

542011950

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

*8320*18340

*13190*29080

*11570*25510

*5680*12520

*7370*16250

*8720*19220

*9260*20410

*9100*20060

*8170*18010

*5680*12520

*7370*16250

706015560

688015170

688015170

702015480

*4260*9390

*4730*10430

*5480*12080

*6190*13650

*6630*14620

*6620*14590

*4260*9390

*4730*10430

476010490

454010010

44009700

43809660

9.0 m30 ft

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

-4.5 m-15.0 ft

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

9.0 m30 ft

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

-4.5 m-15.0 ft

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

*9190*20260

*12400*27340

*10160*22400

*8440*18610

*9800*21610

*12890*28420

*13070*28810

*10830*23880

*6150*13560

*7810*17220

*8830*19470

*9140*20150

*8760*19310

*7410*16340

*6150*13560

*7810*17220

864019050

852018780

857018890

*7410*16340

*3370*7430

*3920*8640

*4750*10470

*5610*12370

*6260*13800

*6560*14460

*6340*13980

*3370*7430

*3920*8640

*4750*10470

561012370

540011900

530011680

532011730

*2400*5290

*3690*8140

*4090*9020

*4550*10030

*4920*10850

*5050*11130

*2400*5290

*3690*8140

40508930

39008600

37908360

37408250

*3120*6880

*3180*7010

*3290*7250

*3430*7560

*3600*7940

*3790*8360

*3990*8800

*4200*9260

*4360*9610

*3120*6880

*3180*7010

32407140

28506280

26805910

26505840

27906150

31506940

39608730

6.47(21.2)

7.92(26.0)

8.81(28.9)

9.34(30.6)

9.56(31.4)

9.51(31.2)

9.18(30.1)

8.53(28.0)

7.46(24.5)

Lifting Capacities

Lifting capacities Lifting capacities

NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

NOTES 1. Lifting capacity are based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Rating over-side or 360 degreeRating over-front Rating over-side or 360 degreeRating over-front

*10060*22180

*14300*31530

*10060*22180

*14300*31530

*9300*20500

*13750*30310

*12340*27210

*9540*21030

*9300*20500

*13750*30310

*12340*27210

*9450*21030

*5090*11220

*6790*14970

*8290*18280

*9080*20020

*9140*20150

*8490*18720

*6550*14440

*5090*11220

*6790*14970

708015610

683015060

679014970

689015190

*6550*14440

*3830*8440

*4350*9590

*5130*11310

*5920*13050

*6460*14240

*6610*14570

*6120*13490

*3830*8440

*4350*9590

478010540

45309990

43709630

43109500

43809660

*4050*8930

*4390*9680

*4790*10560

*5070*11180

34107520

32907250

31706990

30906810

*3520*7760

*3610*7960

*3740*8250

*3900*8600

*4090*9020

*4290*9460

*4460*9830

*4500*9920

*3520*7760

29406480

25505620

23705220

23505180

24905490

28806350

37908360

7.34(24.1)

8.31(27.3)

8.87(29.1)

9.10(29.9)

9.05(29.7)

8.70(28.5)

8.00(26.2)

6.84(22.4)

Boom : 5.65m (18’ 6”) Arm : 2.4 m (7’ 10”) Bucket : 0.80m3 (1.05yd3) SAE heaped With front outrigger and rear dozer blade down.Load radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

Boom : 5.65m (18’ 6”) Arm : 2.9 m (9’ 6”) Bucket : 0.80m3 (1.05yd3) SAE heaped With 4 outrigger downLoad radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

*9250*20390

*12490*27540

*9250*20390

*12490*27540

*10070*22200

*8690*19160

*9950*21940

*13040*28750

*13090*28860

*10820*23850

*10070*22200

*8690*19160

*9950*21940

*13040*28750

*13090*28860

*10820*23850

*6130*13510

*7800*17200

*8830*19470

*9150*20170

*8770*19330

*7400*16310

*6130*13510

718015830

685015100

674014860

678014950

700015430

*3370*7430

*3920*8640

*4750*10470

*5610*12370

*6270*13820

*6560*14460

*6340*13980

*3370*7430

*3920*8640

*4750*10470

456010050

43609610

42709410

42909460

*2290*5050

*3700*8160

*4100*9040

*4560*10050

*4930*10870

*5050*11130

*2290*5050

34607630

33207320

31807010

30706770

30306680

*3130*6900

*3200*7050

*3310*7300

*3450*7610

*3610*7960

*3800*8380

*4010*8840

*4230*9330

*4390*9680

*3130*6900

*3200*7050

26805910

23405160

21804810

21604760

22705000

25805690

32607190

6.42(21.1)

7.88(25.9)

8.78(28.8)

9.30(30.5)

9.53(31.3)

9.48(31.1)

9.15(30.0)

8.49(27.9)

7.42(24.3)

Boom : 5.65m (18’ 6”) Arm : 2.9 m (9’ 6”) Bucket : 0.80m3 (1.05yd3) SAE heaped With front outrigger and rear dozer blade down.Load radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

LIFTING CAPACITIES 17LIFTING CAPACITIES 16

NEW 7 SERIES ROBEX 200W-7

*10060*22180

*14300*31530

*10060*22180

*14300*31530

*9300*20500

*13750*30310

*12340*27210

*9540*21030

*9300*20500

*13750*30310

*12340*27210

*9540*21030

*5090*11220

*6790*14970

*8290*18280

*9080*20020

*9140*20150

*8490*18720

*6550*14440

*5090*11220

*6790*14970

*8290*18280

863019030

858018920

*8490*18720

*6550*14440

*3830*8440

*4350*9590

*5130*11310

*5920*13050

*6460*14240

*6610*14570

*6120*13490

*3520*7760

*3610*7960

*3740*8250

*3900*8600

*4090*9020

*4290*9460

*4460*9830

*4500*9920

*3520*7760

35707870

31106860

29106420

29006390

30706770

35307780

*4500*9920

7.34(24.1)

8.31(27.3)

8.87(29.1)

9.10(29.9)

9.05(29.7)

8.70(28.5)

8.00(26.2)

6.84(22.4)

Boom : 5.65m (18’ 6”) Arm : 2.4 m (7’ 10”) Bucket : 0.80m3 (1.05yd3) SAE heaped With 4 outrigger downLoad radius

Load pointheightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

-4.5 m-15.0 ft

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

7.5 m25.0 ft

6.0 m20.0 ft

4.5 m15.0 ft

3.0 m10.0 ft

1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft

-3.0 m-10.0 ft

-4.5 m-15.0 ft

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

kglb

*3830*8440

*4350*9590

*5130*11310

558012300

541011930

535011790

542011950

*4050*8930

*4390*9680

*4790*10560

*5070*11180

*4050*8930

40208860

39008600

38108400

*9190*20260

*12400*27340

*10160*22400

*8440*18610

*9800*21610

*12890*28420

*13070*28810

*10830*23880