Upload
hacong
View
232
Download
5
Embed Size (px)
Citation preview
R1300G II Underground Mining Loader
NameVenueDate
Machine Specifications
Gross Power SAE 136 kW (182 hp) @ 2200 RPM Engine Model CAT C6.6 ACERT Speeds Forward kph mph1st 5.3 3.2 2nd 10.1 6.23rd 18.1 11.24th 26.1 16.2Speeds Reverse1st 4.9 3.02nd 9.2 5.73rd 16.4 10.24th 25.9 16.1Tire Size 17.5 X 25 20 PLY L5 STMS
Outer Clearance Radius 5741 mm (226.0”)Turning Radius 4650 mm (183.1”)Inner Clearance Radius 2914 mm (114.7”)Articulation Angle 42.5 degreesAxle Oscillation 10 degrees
Machine Specifications
Machine Specifications
Nominal Payload Capacity 6,800 kg (14,991 lb)Gross Machine Weight Empty 20,950 kg (46,187 lb)Gross Machine Weight Loaded 27,750 kg (61,178 lb)Width (Overall ) 2,221 mm (87.4 in)Height (Overall) 2,120 mm (83.4 in)Length (Tramming) 8,714 mm (343.1 in)Ground Clearance 328 mm (12.9 in)
Machine Specifications
R1300G Series II Loading AD30
AD30 shown with 14.4m3 (22.9 yd3) dump bodyR1300G II shown with 3.1 m3 (4.1 yd3) bucket at full lift
R1300G II Loading AD30 from Rear
Machine Specifications
AD30 shown with 17.5m3 (22.9 yd3) dump bodyR1300G II shown with 3.1 m3 (4.1 yd3) bucket at full lift
Stability & Weight Distribution (Loaded)
Distribution Front Axle 67%Distribution Rear Axle 33%
(HP) = High Penetration Bucket(STD) = Standard Bucket(EB) = Ejector Bucket
Buckets
Bucket Sizes m3 (yd3)
9EP0993 2.4 3.1
9EP1121 (EB) 2.5 3.3
9EL8200 2.8 3.7
9EQ2240 (STD) 3.1 4.1
9EP0994 3.4 4.4
Safety Features
• ROPS/FOPS Certified Operator Station
• 3 Point Contact Cabin & Machine Access
• Interlock Strategy
• Excellent Visibility
• Suspension Seat
• Inertia Reel Retractable Seat Belts
Safety Features
Steering Primary Lockout Interlock Strategy
Steering and Implement Lockouts
Safety Features
If the operator fails to apply the parking brake and steering lock prior to exiting the the cab, the interlock system will detect the absence of operator input and engage the parking brake, neutralize the steering, and command the engine ECM to shut down.
Steering Frame Lock Pin
Safety Features
• Heat Shielding <200 Degrees C• Integrated Fire Suppression System• Ground Level Fire System Activation and
Engine Shut Down
Bucket Control Group Safety Pins (on board)
Stored Position Installed Position
Safety Features
Firewall
Fitted to the rear of the transmission compartment as a barrier, to prevent pressurised oil from coming into contact with hot engine components
Safety Features
Safe Access and Walkways
Anti-skid Tread on All Walking Surfaces
Safety Features
Gas Strut for Easy Hood Lifting
Serviceability
Ground Level Servicing and Fluid Level Checks
Serviceability
Transmission Oil
Fuel Filters and Priming Pump
Ground Level Servicing and Fluid Level Checks
Serviceability
Engine Shut Down and Battery Disconnect Switches Hydraulic Oil
Coolant LevelEngine Oil
Hinged Belly Guards
Ease of Access
Serviceability
Operator Ergonomics
Operator Ergonomics
Open Operator Station
• ROPS/FOPS Certified
• Removable Canopy
• Cast Rounded Corners
• Resiliently Mounted
• Ergonomic Design
• Lower Cab Light
Safety with Comfort
• Excellent Visibility
• Wrap Around Dash
• Four-way AdjustableSuspension Seat
• Adjustable Arm Rests for Operator Comfort
• Joystick Integral Functions
Operator Ergonomics
Control Pedals
• Ergonomic Placement of Pedals
• Foot Rest Between Pedals
• Transmission Neutralizer Pedal (Left)
Operator Ergonomics
Machine Systems
Power Train
Computer Matched Power Train is Reliable and Fuel Efficient• Engine CAT C6.6 Gross Power SAE 136 kW (182 hp) @ 2200 RPM • Heavy Duty Powershift Transmission• Heavy Duty Torque Converter and Up-drive Housing• Heavy Duty Differentials and Final Drives• Fully Oil Immersed Disc Brakes
Engine
CAT C6.6 ACERT
• Gross Power SAE136 kW (182 hp) @ 2200 RPM
• Displacement 6.6 L• EPA Tier 3, EU Stage 3 Emission &
MLIT Stage 3 Certified
• 4 Speed Forward/ 4 Speed Reverse
• Electronically Controlled Powershift
• Manual or Auto-shift Modes
• Large Diameter Clutch Packs for Smooth Shifting and Increased Component Life
Transmission
• Heavy Duty High Capacity Torque Converter
• Integral Torque Converter and Up-drive Housing
Torque Converter
• Planetary Reduction at Each Wheel• Torque Developed at the Wheels, Less
Stress on the Axle Shafts• Planetary Units can be Removed
Independently from the Wheels and Brakes
Differentials & Final Drives
• Equally Dividing the Power Betweenthe Front and Rear Differentials
• Precision Cut Gears SmoothlyTransfer the Power
Output Transfer Gears
Steering System
Steering Neutralizer Steering Cylinder
• Single, Large Bore, Double Acting Cylinder
• Full Flow Filtering• Designed for Excellent
Steering Response at all Engine Speeds
• STIC Control System (Standard)
• Steering Neutralizers (Standard)
• Secondary Steering System (Optional)
Service Brakes• Four Wheel Hydraulically Actuated, Fully
Enclosed Oil Immersed Disc Brakes• Independent Front and Rear Circuits
Parking Brake• Spring Applied Fluid Released (SAFRTM)• Parking Brake Applies in the Event of Loss
of Hydraulic Oil Pressure
Braking System
Hydraulic System
• Superior Lift Capacity• Large Bore Lift and Tilt Cylinders• Proven CAT® Seals and Cylinder Bearings• High Efficiency Positive Displacement Pumps
• XT- 3 and XT- 5 Hydraulic Hoses (Superior Strength, Flexibility and Life)
• Reusable Hose Couplings• Heavy Duty Reusable Hose Clamps
Caterpillar Electronic Monitoring System (CEMS)
• Designed to Withstand Severe Working Conditions
• Temperature, Moisture, Vibration and Shock Resistant
• Illuminated Rocker Switches and Controls are Easily Identified and Accessible
• Self-Test on Start-Up
Electrical System
• Mono Configuration• High Ambient Capacity• Copper Fin, Solder Dipped Radiator
Core• Cross Flow• Double Pass Hydraulic Cooler
Cooling System
Options
LIFT CYLINDER
LIFT CYLINDER
NITROGEN/OIL ACCUMULATOR
ACCUMULATORCONTROL VALVE
MAIN CONTROLVALVE
Options
• Reduces Fore and Aft PitchingMotion
• Incorporates an AccumulatorSystem in the Lift Circuit
• The Nitrogen/Oil AccumulatorActs as a Shock Absorber
• Dampens Bucket Forces andStabilizes the Machine
• Automatic Selection FunctionEngages/Disengages RideControl System at Preset Speeds
• Improves Cycle Times and LoadRetention
Ride Control
Tires and Rims
• Bridgestone 17.5 X 25 20 PLY L5 STMS
• Michelin17.5 X 25 X-MINE D2
• Goodyear17.5 X 25 20 PLY SMO
3 Piece Rim Standard
5 Piece Rim Optional
Options
CAT® Heal ShroudsCast Half Arrow Head
Bucket Wear BarsCAT® Half Arrow Head
Options
Automatic Lubrication System Bolt-on Towing Attachment
Options
Remote Control
Wiggins Fast Fill Systems
Payload Control System
On Board Fire System
Options
Air Conditioned Enclosed Operator Station
Tee Seat
Options
Radiator Guard Protection Bars
Operator StationProtection Bars
Options
Brake Release System - Recovery Hook
Recovery Systems
Options
Brake Release System - Recovery Bar
Options
Recovery Systems
Literature
Parts BooksPaperElectronic (LinkOne)
Operation and Maintenance ManualsService Manuals
EnginePower Train Steering SystemBraking SystemHydraulic SystemElectrical System & Operator StationElectrical Schematics Hydraulic Schematics
Operator and Maintenance Training
Service MagazinesService LettersTechnical Information BulletinsSpecial InstructionsFitting InstructionsOwner Notification
LinkOne Parts PageCustomer Support
Common Caterpillar ComponentsCOMPONENT CATERPILLAR MODEL Engine CATERPILLAR C 6.6 Torque Converter & Lockup Clutch 950G / 962G / IT62G / TH28 Torque Converter Housing R1300G II Transmission 950G Differentials 950G / IT62G / 950H Final Drives R1300G / 613C / TH28 Service Brakes 950G Parking Brakes R1300G Steering System R1300G Secondary Steering (Optional) TR28 / R1300G Hydraulic System R1300G / R1600G Hydraulic Cylinder (Tilt) R1300G Hydraulic Cylinders (Lift) R1300G Articulation 980F Electrical System R1300G / CAT Bucket Control Group R1300G
Note: Some components referred to in this list are indicative only.For specific parts information the Parts Book should be consulted.