Control
Control
I/O Button
Temperature Button
Each time you push button, a mode is selected in a sequencethat
goes from AUTO,COOL, DRY, HEAT (cooling only type without), FAN
ONLY andback to AUTO.
the Push the button to start operation, push thebutton again to
stopoperation.
This button is usedfor selecting fan speed.Each time you pushthe
button, a fan speedis selected in a sequencethat goes from
AUTO,LOW, MED(Some modelswithout, HIGH, and back toAUTO.
Mode select button
Fan button
Control
Control
After Sliding the cover, the button and function are as
follows:
This button is used forsetting the current timeand OFF time.
Adjust forwardsAdjust backwords
Push this button to cancel ON timer and OFF timer.
When you push the RESET button, all current settingsare
cancelled and get intothe condition of beginning.In the clock, the
colon in"0:00" will flash, the modedisplays "AUTO", fan speed
displays "AUTO", thetemperature displays "24".
Push ON-TIME timerbutton to set the ON timer.Push OFF-TIME
timerbutton to set the OFF timer.
Auto louver buttonPush this button to swinglouver. Push the
buttonagain to stop.
Push this button to confirmON and OFF timer settings.
Confirmation button
Clock buttonPush this button to settime.
When you push the LOCKbutton, all current settings are locked in
and the remotecontroller does not acceptany operation except that
ofthe LOCK button. Use the lock mode when you want toprevent
setting from beingchanged accidentally or playfully. Push the LOCK
button again when you want to cancel the LOCK mode.
FAN
Timer button
RESET buttonLock button
