QWIKPOST®

PRODUCT RANGEThe quick and easy way to erect a fence

Qwikpost® Spike

SPK504550x50mm post, 450mm spike.Suitable for fences up to 0.9m(3ft), sign posts etc.

SPK7560 75x75mm post, 600mm spike.Fences up to 1.2m (4ft).

SPK1060 100x100mm post, 600mm spike.Fences up to 1.8m (6ft).

Qwikpost® Bolt-down Support

BLT5050x50mm post, 125x125mmbase. Fences up to 0.9m onexisting concrete.

BLT7575x75mm post, 150x150mmbase. Fences up to 1.8m onexisting concrete.

BLT10100x100mm post, 175x175mmbase. Heavy duty fences up to1.8m on existing concrete.

Qwikpost® Repair Spike

REP7575x75mm post, 300mm spike.To replace broken post set inconcrete.

Qwikpost® Concrete-in Support

CON7575x75mm post, 200mm anchor.Beds into newly mixed concretefor fences up to1.8m.

CON10

100x100mm post, 200mm anchor. Beds into newly mixedconcrete for heavy duty fences up to 1.8m.

Qwikpost® Arris Bracket

ARB001Arris bracket, 75x75mm post.Fixes horizontal post to verticalpost.

Qwikpost® U-Clips

UCP47 U-clip, 47mm.Fixes fence panel to post.

Qwikpost® Post Cap

QPC75Post Cap.Protects top of fence post.For 75x75mm posts.

Qwikpost® Drive-in Tool

DOLDrive-in tool.Used to drive 75x75mm spikeinto ground.

www.catnic.com

Care has been taken to ensure that the contentsof this publication are accurate, but Tata SteelEurope Limited and its subsidiaries, whichincludes Tata Steel UK Limited, do not acceptresponsibility or liability for errors or informationthat is found to be misleading. Suggestions for,or descriptions of, the end use or application ofproducts or methods of working are forinformation only and Tata Steel Europe Limitedand its subsidiaries accept no liability inrespect thereof.

Before using products or services supplied ormanufactured by Tata Steel Europe Limited andits subsidiaries, customers should satisfythemselves as to their suitability.

Catnic reserves the right to change informationcontained within this brochure at any time.

© Copyright 2015 Tata Steel UK Limited.

CatnicPontypandy Industrial EstateCaerphillyCF83 3GLT: 029 2033 7900F: 029 2086 7796www.catnic.com

English version CQPS:1000:EN:01/2015

Fixings required• Galvanised or sherardised round plain head

nails (2.65-3.75mm diameter) for U-Clips, Z-Clips and Post Cap

• 4 x 10mm expanding bolts for each Bolt-down Support. Follow manufacturer’sguidelines when selecting & fixing bolts

Tools Required

Sledge Hammer Spirit Level 13mm Spanner Qwikpost® Drive-in Tool (DOL)

QWIKPOST®

INSTALLATION GUIDEThe quick and easy way to erect a fence

Check position of any underground services andother major obstructions (large stones, etc). Mark out line of fence and drive in the firstQwikpost® Spike with the Drive-in Tool andsledge hammer, using short firm strokes. Ensurethe Qwikpost® Spike is positioned with the boltsat 900 to the line of fence.

• Quick and efficient method of erecting new fences

• No need for digging

• Suitable for a variety of ground types including soilor patios

• Twin-bolt system for secure fixing

• Assists the protection of fence post by drainingwater away from post

Qwikpost® Spike• Ideal for soft ground areas• Twin-bolt system for secure fixing• Suitable for fences up to 1.8m• Accommodates 50x50mm, 75x75mm and

100x100mm fence posts

1

After every few strokes check vertical alignmentwith spirit level and adjust as necessary. Checkhorizontal alignment and adjust. Drive in untilthe box of the Spike is just above ground level.

2

Fix Qwikpost® U-Clips to fence post withgalvanized or sherardised round head nails. Use at least two clips per side of each panel. Clips should be positioned 200-250mm from topand bottom of fence panel.

3

Place fence post into the box of spike and tightenthe bolts until secure.

4

Locate fence panel into U-Clips and secure with galvanised nails. The bottom of the fence panelshould be positioned just above ground level.

5

Drive in second Qwikpost® Spike at the end ofthe fence panel and repeat steps 2 to 6.

6

Use the Bolt-down Support base as a template tomark position of holes and drill to suit 4 x 10mmexpanding bolts (not supplied). Ensure the boltsin the Qwikpost® are positioned at 900 to the lineof the fence.

1

Place bolt down support over the bolts andcheck for vertical alignment – it may benecessary to pack under the base. Tighten thebolts to secure.

2

Qwikpost® Bolt-down Support• Ideal for solid surfaces such as patios or

driveways• Suitable for fences up to 1.8m• Accommodates 50x50mm, 75x75mm and

100x100mm fence posts

Square off the base of the broken post.

1

Tap the Repair Spike in between the old post andthe concrete base until the box of the RepairSpike is just above the level of the concrete. Ensure the bolts in the Repair Spike are at 900

to the line of the fence.

2

Qwikpost® Repair Spike• Helps repair broken post set in concrete• Suitable for fences up to 1.8m• Accommodates 75x75mm fence posts

Place new fence post into box Repair Spike andtighten the bolts until secure.

3

Qwikpost® Arris Bracket• Suitable for fixing horizontal to

vertical fence posts• Accommodates universal

posts sizes

• Fixed using galvanised orsherardised round plain head nails(2.65-3.75mm0)

QWIKPOST®

INSTALLATION GUIDEDig hole, at least 450mm square by 450mm deep(for a CON75) and partially fill with concrete.

1

Place Concrete-in Post in centre of hole, ensuringthe box is slightly above the finished level of concrete. The bolts in the Qwikpost® should bepositioned at 900 to the line of the fence. Checkthe post for vertical and horizontal alignment.

2

Qwikpost® Concrete-in Post• Helps repair broken post set in concrete• For use in areas of hard standing or where the

ground prevents use of a Qwikpost® Spike• Accommodates 75x75mm and 100x100mm

fence posts

Fill the hole with concrete ensuring the concretefully surrounds the legs of the concrete in Postand allow to cure (at least 24 hours) beforeinstalling the new fence post.

3

Qwikpost® Post Cap• Protects top of fence post• Available in brown synthetic

material• Suitable for 75x75mm posts• Fixed using galvanised or

sherardised round plain head nails(2.65-3.75mm0)

Qwikpost® U-Clips & Z-Clips• Used for fixing

fence panels toposts

• U-clipsaccommodate 47mm and 52mmthick fence panels

• Fixed using galvanised orsherardised round plain head nails(2.65-3.75mm0)

• Recommended that at least two U-clips and four Z-clips are used perside of panel

• Fixings should be positioned 200-250mm from top and bottomof fence panel