LubricationSingle-Stage and Two-Stage Splash: Connecting rod

dippers splash oil onto the components requiring lubrication.

Two-Stage Pressure: Positive displacement Gerotor oil

pump and the connecting rod dippers provide 100% lubri-

cation to the bearings and components requiring lubrication.

Warranty Quincy Air Master units come

standard with a one-year

warranty. (See owner’s manual

for details). The single-stage

QTS basic compressors

(pumps) come standard with a two-year warranty. The

two-stage units have an optional two-year warranty on

the basic compressor (pump). A two-year warranty kit must

be purchased within 30 days from date of purchase of the

compressor. The warranty kit includes Quin-Cip lubricant

and filters to maintain the compressor for two years.

The CCAS units come standard with a two-year warranty.

The two-year warranty kit is shipped with the unit.

All performance data meets CAGI/PNEUROP PN2CPTC2 andPN2CPTC3 acceptance tests for electricity and I.C. engine-drivenpackaged displacement air compressors.

Proper filtration must be used for breathing air applications tomeet OSHA29CFR1910.134

We reserve the right to change specifications without liability,without advance notice, and without incurring obligation for prod-ucts previously or subsequently sold.

For more information about Quincy’s Air Master SeriesCall: 217.277.0270E-mail: airmaster@quincycompressor.comDiscover: www.quincyairmaster.com

©2002 Quincy Air Master; Quincy CompressorAll rights reserved. Litho in U.S.A. (AMSP-001 02/02)

Quincy Compressor®

Air Master® SeriesT R U E B L U E R E L I A B I L I T Y

21

Table of Contents

Single-Stage

3 Contractor Units

4 Two-Cylinder Contractor Units

5 Four-Cylinder Contractor Units

8 Hand-Carry Units

9 Two-Cylinder Commercial Portable Units

10 Two-Cylinder Commercial Stationary Units

11 Four-Cylinder Industrial Stationary Units

Two-Stage

12 Industrial Two-Stage Stationary Units

13 Heavy-Duty Industrial Two-Stage Splash-Lubricated Stationary Units

15 Heavy-Duty Industrial Two-Stage Pressure-Lubricated Stationary Units

17 Heavy-Duty Industrial Two-Stage Units with Combination Pressure Switch/Starter

18 Heavy-Duty Engine Powered Two-Stage Units

19 Heavy-Duty Industrial Two-Stage Duplex Units

20 Complete Compressed Air System Units

21 Standard Features on Quincy Air Master Series Reciprocating Compressors

23 Air Treatment Packages (ATP)

24 Accessories

25 Misc. Accessories

26 Quin-Cip Lubricant

Because you're on the job every day, we're on

the job every day. We've applied over 80 years of

compressed air engineering and manufacturing

expertise to create a line of compressors uniquely

designed to meet your demands. Rugged.

Durable. Reliable. Quincy Air Master Series.

Quincy Commitment

•Q

uincy Com

mitm

ent

•Table of C

ontents

43

Model: G15H17PC3

Two-Cylinder, Electric 8-Gallon Contractor Unitscfm cfm cfm Tank Ship.

Model hp Control rpm @ 40 @ 100 @ 125 Size Wt. LxWxHNumber psig psig psig (gal) (lb) (in)

111C8PN3 1.5 CR 660 7.4 6.3 5.8 8 210 45x23x25111A8PN3 1.5 S/S 660 7.4 6.3 5.8 8 210 45x23x25111DC8PN3 1.5 DC 660 7.4 6.3 5.8 8 210 45x23x25111CV8PN3 1.5 CR/DV 660 7.4 6.3 5.8 8 211 45x23x25111DV8PN3 1.5 DC/V 660 7.4 6.3 5.8 8 211 45x23x25121C8PN3 2.0 CR 820 9.6 8.1 7.5 8 210 45x23x25121A8PN3 2.0 S/S 820 9.6 8.1 7.5 8 210 45x23x25121DC8PN3 2.0 DC 820 9.6 8.1 7.5 8 210 45x23x25121CV8PN3 2.0 CR/DV 820 9.6 8.1 7.5 8 211 45x23x25121DV8PN3 2.0 DC/V 820 9.6 8.1 7.5 8 211 45x23x25

Two-Cylinder, Electric 17-Gallon Contractor Units111C17PC3 1.5 CR 660 7.4 6.3 5.8 17 220 47x22x29111A17PC3 1.5 S/S 660 7.4 6.3 5.8 17 220 47x22x29111DC17PC3 1.5 DC 660 7.4 6.3 5.8 17 220 47x22x29111CV17PC3 1.5 CR/DV 660 7.4 6.3 5.8 17 221 47x22x29111DV17PC3 1.5 DC/V 660 7.4 6.3 5.8 17 221 47x22x29121C17PC3 2.0 CR 820 9.6 8.1 7.5 17 220 47x22x29121A17PC3 2.0 S/S 820 9.6 8.1 7.5 17 220 47x22x29121DC17PC3 2.0 DC 820 9.6 8.1 7.5 17 220 47x22x29121CV17PC3 2.0 CR/DC 820 9.6 8.1 7.5 17 221 47x22x29121DV17PC3 2.0 DC/V 820 9.6 8.1 7.5 17 221 47x22x29

Contractor UnitsCompare the Quincy Air Master Series large 2.75" bore with thecompetition. A larger bore enables the Quincy QTS single-stagebasic compressor (pump) to provide more air per rpm andtherefore can run 200-300 rpms slower than the competition.Fewer rpms mean cooler operating temperatures. And cooleroperating temperatures mean less maintenance, consistentair delivery, and enhanced durability.

Add the standard 12" cast-iron flywheel and the 16-gaugeexpanded metal belt guard angled to increase air flow acrossthe compressor, and the discharge temperature is reduced asmuch as 15%.

Cool and rugged, the Quincy Air Master Series Contractor Unitfeatures a heavy-gauge steel tank and top plate to reduce thepossibility of damage to the tank and the impact guard isdesigned to protect the drain valve. The unit is equipped witha pneumatic tire, complete with air leak sealant, which providesimproved mobility and flexibility on the job site.

Two-Cylinder, Gasoline Contractor Unitscfm cfm cfm Tank Ship.

Model hp Engine rpm @ 40 @ 100 @ 125 Size Wt. LxWxHNumber psig psig psig (gal) (lb) (in)

G15H8PN3 5.5 Honda 1030 11.4 9.7 9.1 8 215 45x23x26G15H17PC3 5.5 Honda 1030 11.4 9.7 9.1 17 225 47x22x30

CR = Constant Run • S/S = Start/Stop • DC = Dual ControlCR/DV = Constant Run/Dual Voltage • DC/V = Dual Control/Voltage

Model: 111DC8PN3

•C

ontractor Units

•Tw

o-Cylinder C

ontractor Units

Two-Cylinder Contractor Units• QTS-3 Single-Stage Cast-Iron Compressor• Splash Lubrication• 1.5 to 2 hp 1725 rpm Single-Phase Electric

Motors (115/230v)• 5.5 hp Gasoline Honda Engine• Pneumatic Wheel with Air Leak Sealant• Heavy-Duty 3/8" Norgren Regulator• Rubber Seat Drain Valve with Impact Guard• 8-Gallon Tanks and 17-Gallon ASME Coded Tanks• 125 psig Maximum Working (cut-out) Pressure• ASME Coded Relief Valve in the Discharge

Line and Tank• Optional Filter/Regulator Combination• One-Year Warranty on the Complete Unit• Two-Year Warranty on the Basic Compressor (pump)• Electric Models Have a Heavy-Duty 12/3 Power Cord• Gasoline Models Have an Automatic Throttle Control

and a Hard Piped Oil Drain on the Engine

65

Model: G18H17PC5

Model: G18H8PN5

Four-Cylinder, Electric Contractor Unitscfm cfm cfm Tank Ship.

Model hp Control rpm @ 40 @ 100 @ 125 Size Wt. LxWxHNumber psig psig psig (gal) (lb) (in)

131C8PN5 3 CR 700 16.1 13.7 12.9 8 245 45x23x25131DC8PN5 3 DC 700 16.1 13.7 12.9 8 245 45x23x25131C17PC5 3 CR 700 16.1 13.7 12.9 17 250 47x22x29131DC17PC5 3 DC 700 16.1 13.7 12.9 17 250 47x22x29

Four-Cylinder, Gasoline Contractor Unitscfm cfm cfm Tank Ship.

Model hp Engine rpm @ 40 @ 100 @ 125 Size Wt. LxWxHNumber psig psig psig (gal) (lb) (in)

G18H8PN5 8 Honda 930 20.6 18.0 16.9 8 250 45x23x29G18H17PC5 8 Honda 930 20.6 18.0 16.9 17 255 47x22x32

Four-CylinderContractor Units• QTS-5 Single-Stage Cast-Iron Compressor

• Splash Lubrication

• 3 hp 1725 rpm 230v Single-Phase Electric Motor

• 8 hp Gasoline Honda Engine

• Pneumatic Wheel with Air Leak Sealant

• Heavy-Duty 3/8" Norgren Regulator

• Rubber Seat Drain Valve with Impact Guard

• 8-Gallon Tanks and 17-Gallon ASME Coded Tanks

• 125 psig Maximum Working (cut-out) Pressure

• ASME Coded Relief Valve in Discharge Line and Tank

• Optional Filter/Regulator Combination

• One-Year Warranty on the Complete Unit

• Two-Year Warranty on the Basic Compressor (pump)

CR = Constant RunDC = Dual Control

•Four-C

ylinder Contractor U

nits

87

Hand-Carry Units• Direct-Drive Aluminum Compressor

• Cast-Iron Cylinder on Electric Model

• Splash Lubrication

• U.S. Threaded Hardware (SAE & NPT)

• U.S. Electrical Components

• ASME Coded Relief Valve in Discharge

Line and Tank

• 125 psig Maximum Working (cut-out) Pressure

• 4.4-Gallon Tanks

• One-Year Warranty

Hand-Carry Unitscfm cfm cfm Tank Ship.

Model hp Control @ 40 @ 100 @ 125 Size Wt LxWxHNumber psig psig psig (gal) (lb) (in)

H1214PN 2 DD/SS 5.1 4.1 3.6 4.4 65 20x15x19H14H4PN 4 DD/CR 6.1 4.7 4.4 4.4 75 20x21x19

DD/CR = Direct-Drive/Constant RunDD/SS = Direct-Drive/Start Stop

•H

and-Carry U

nits

Model: H1214PN

Model: H14H4PN

109

Two-Cylinder Commercial Portable Units• QTS-3 Single-Stage Cast-Iron Compressor

• Splash Lubrication

• 3.5 hp (115v) to 5 hp (230v) 3450 rpm

Single-Phase Electric Motors

• 20-Gallon Portable ASME Coded Tank

• Filter/Silencer

• 125 psig Maximum Working (cut-out) Pressure

• 1/4" Regulator with Gauge

• Power Cord Standard

• ASME Coded Relief Valve in Discharge Line and Tank

• Rated #1 for Performance, Value and Efficiency by

Better Homes and Gardens Wood Magazine

• One-Year Warranty on the Complete Unit

• Two-Year Warranty on the Basic Compressor

Model: 131A20PC3

cfm cfm cfm Tank Ship.Model hp rpm @ 40 @ 100 @ 125 Size Wt LxWxHNumber psig psig psig (gal) (lb) (in)

131A20PC3 3.5 665 8.1 6.4 6.0 20 175 33x18x33151C20PC3 5 990 11.2 9.4 8.9 20 180 33x18x33

Commercial Two-Cylinder Portable Units

cfm cfm cfm Tank Ship.Model hp rpm @ 40 @ 100 @ 125 Size Wt LxWxHNumber psig psig psig (gal) (lb) (in)

131A30VC3 3.5 665 8.1 6.4 6.0 30 220 29x21x43151C30VC3 5 990 11.2 9.4 8.9 30 225 29x21x43151C60VC3 5 990 11.2 9.4 8.9 60 280 29x21x64

Commercial Two-Cylinder Stationary Units

Two-Cylinder Commercial Stationary Units• QTS-3 Single-Stage Cast-Iron Compressor

• Splash Lubrication

• 3.5 hp (115v) to 5 hp (230v)

3450 rpm Single-Phase Electric Motors

• 30- to 60-Gallon ASME Coded Tanks

• Service Valve

• ASME Coded Relief Valve in Discharge

Line and Tank

• 125 psig Maximum Working (cut-out) Pressure

• One-Year Warranty on the

Complete Unit

• Two-Year Warranty on the

Basic Compressor

Model: 131A30VC3

•Tw

o-Cylinder C

omm

ercial Portable U

nits

•Tw

o-Cylinder C

omm

ercial Stationary U

nits

1211

Four-Cylinder Industrial Stationary Units• QTS-5 Single-Stage Cast-Iron Compressor• Large 2.75" x 2" Bore & Stroke• Splash Lubrication• 5 hp 230 Volt Single-Phase

Capacitor Start and Run Motor• Starter Not Required• 60- or 80-Gallon ASME Coded Tanks• Filter/Silencer• ASME Coded Relief Valve in Discharge

Line and Tank• 125 psig Maximum Working (cut-out) Pressure• One-Year Warranty on the Complete Unit• Two-Year Warranty on Basic Compressor

Optional Equipment• Heavy-Duty Slow Speed Single-Phase

& Three-Phase Motors • Pneumatic and Electronic Tank Drains

Model: 1V41C60VC5

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

341C60VCB* 5 914 17.2 16.3 60 505 37x22x73341C80HCB* 5 914 17.2 16.3 80 545 70x23x45341C80VCB* 5 914 17.2 16.3 80 585 37x24x73361C80HCB 7.5 1026 23.2 22.4 80 565 70x23x45361C80VCB 7.5 1026 23.2 22.4 80 585 37x24x73

Note: V = Vertical H = Horizontal*Capacitor Start Motor, Starter Not Required.

Four-Cylinder Industrial Stationary Units

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

241C60VCB* 5 914 17.2 16.3 60 500 37x22x73241C80HCB* 5 914 17.2 16.3 80 540 70x23x45241C80VCB* 5 914 17.2 16.3 80 580 37x24x73261C80HCB 7.5 1026 23.2 22.4 80 560 70x23x45261C80VCB 7.5 1026 23.2 22.4 80 580 37x24x73

Note: V = Vertical H = Horizontal*Capacitor Start Motor, Starter Not Required.

Industrial Two-Stage Units – Splash Lubricated

Industrial Two-Stage Units – Pressure Lubricated

cfm cfm cfm Tank Ship.Model hp rpm @ 40 @ 100 @ 125 Size Wt LxWxHNumber psig psig psig (gal) (lb) (in)

1V41C60VC5* 5 930 20.6 18.0 16.9 60 400 29x21x641V41C80VC5* 5 930 20.6 18.0 16.9 80 440 37x22x73

*Capacitor Start Motor, Starter Not Required.

Industrial Two-StageStationary Units• Two-Stage Cast-Iron

Compressor• Splash- or Pressure-

Lubrication• 5 hp to 7.5 hp, 3450

rpm motors• 230 Volt Single-Phase

Capacitor Start and Run Motors• Starter Not Required• 60- & 80-Gallon Horizontal

and Vertical ASME Tanks• 175 psig Maximum

Working (cut-out) Pressure• Oil Sight Glass • ASME Coded Relief Valve in

Interstage, Discharge Line and Tank• Optional Starter Required on 7.5 hp Models

Optional Equipment• Filter/Silencers• Pneumatic Tank Drain• Electronic Tank Drain• Two-Year Warranty Kit Model: 241C60VCB

•Four-C

ylinder Industrial Stationary U

nits

•Industrial Tw

o-Stage S

tationary Units

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

253D80HCB 5 942 17.7 17.2 80 540 70x23x47253D80VCB 5 942 17.7 17.2 80 580 37x24x74253D120VCB 5 942 17.7 17.2 120 653 40x30x75273D80HCB 7.5 1034 23.8 22.6 80 560 70x23x47273D80VCB 7.5 1034 23.8 22.6 80 580 37x24x74273D120VCB 7.5 1034 23.8 22.6 120 673 40x30x75P2103D80HCB 10 968 35.9 35.0 80 800 73x26x49P2103D12HCB 10 968 35.9 35.0 120 850 78x28x55P2103D12VCB 10 968 35.9 35.0 120 1000 40x30x752153D80HCA 15 950 54.4 52.5 80 957 73x26x492153D12HCA 15 950 54.4 52.5 120 995 78x28x552203D12HCA 20 680 80.4 78.4 120 2320 73x28x622253D12HCA 25 830 98.8 95.6 120 2370 73x28x622303D12HCA 30 940 112.8 108.3 120 2470 73x28x62

Note: V = Vertical H = HorizontalOptional Magnetic Starter Required on Three-Phase Units

Heavy-Duty Industrial Two-StageThree-Phase Splash-Lubricated Stationary Units

1413

Model: 2153D12HCA

Heavy-Duty Industrial Two-Stage Splash-LubricatedStationary Units• Two-Stage Cast-Iron Compressor

• Splash Lubrication

• Heavy-Duty 1725 rpm Industrial Motors

• Single-Phase Motors through 10 hp, 230 Volt

• Three-Phase Motors 5 hp to 30 hp 200/208,

230 or 460 Volt

• 80- to 120-Gallon Vertical ASME Tanks (5 to 10 hp)

• 80- to 120-Gallon Horizontal ASME Tanks (5 to 30 hp)

• 175 psig Maximum Working (cut-out) Pressure

• Oil Sight Glass

• ASME Coded Relief Valve in Interstage,

Discharge Line and Tank

• Dual Control Standard 15 to 30 hp

• High-Efficiency Intercoolers

• Optional Magnetic Starter Required on

Three-Phase Units

• 100% Duty Cycle at Specified Pressures

• One-Year Warranty Standard, Two-Year

Warranty Optional

Optional Equipment

• Filter/Silencer

• Magnetic Starter (Standard on Single-Phase)

• Starter/Control Panel

• TEFC Motors

• Low Oil Level Switch

• Air-cooled Aftercooler

• Dual Control on 5 to 10 hp

• Vibration Isolators (Horizontal Units)

• Pneumatic Tank Drain

• Electronic Tank Drain

• Two-Year Warranty Kit

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

251CS80HCB 5 942 17.7 17.2 80 540 70x23x47251CS80VCB 5 942 17.7 17.2 80 580 37x24x74251CS120VCB 5 942 17.7 17.2 120 653 40x30x75271CS80HCB 7.5 1034 23.8 22.6 80 560 70x23x47271CS80VCB 7.5 1034 23.8 22.6 80 580 37x24x74271CS120VCB 7.5 1034 23.8 22.6 120 673 40x30x75P2101CS80HCB 10 968 35.9 35.0 80 800 73x26x49P2101CS12HCB 10 968 35.9 35.0 120 850 78x28x55P2101CS12VCB 10 968 35.9 35.0 120 1000 40x30x75

Note: V = Vertical H = HorizontalMagnetic Starter Standard on Single-Phase Units

Heavy-Duty Industrial Two-Stage Single-Phase Splash-Lubricated Stationary Units

Model: P2103D12VCB

•H

eavy-Duty Industrial

Two-S

tage Splash-Lubricated

Stationary U

nits

1615

Model: 371C120VC with optional starter and aftercooler

Heavy-Duty Industrial Two-StagePressure-Lubricated Units• Two-Stage Cast-Iron Compressor

• Pressure Lubrication

• Heavy-Duty 1725 rpm Industrial Motors

• Single-Phase Motors 230 Volt

• Three-Phase Motors 200/208, 230 or 460 Volt

(Optional Magnetic Starter Required on

Three-Phase Unit)

• 80- to 120-Gallon Vertical and Horizontal

ASME Tanks

• 175 psig Maximum Working (cut-out) Pressure

• Oil Sight Glass

• High-Efficiency Intercoolers

• ASME Coded Relief Valve in Interstage,

Discharge Line and Tank

• 100% Duty Cycle at Specified Pressures

• One-Year Warranty Standard, Two-Year

Warranty Optional

Optional Equipment

• Filter/Silencer

• Magnetic Starter (Standard on Single-Phase)

• Starter/Control Panel

• TEFC Motors

• Low Oil Level Switch

• Air-cooled Aftercooler

• Dual Control

• Vibration Isolators (Horizontal Units)

• Pneumatic Tank Drain

• Electronic Tank Drain

• Two-Year Warranty Kits

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

351CS80HC 5 942 17.7 17.2 80 545 70x23x47351CS80VC 5 942 17.7 17.2 80 585 37x24x74351CS120VC 5 942 17.7 17.2 120 658 40x30x75371CS80HC 7.5 1034 23.8 22.6 80 565 70x23x47371CS80VC 7.5 1034 23.8 22.6 80 585 37x24x74371CS120VC 7.5 1034 23.8 22.6 120 678 40x30x75

Note: V = Vertical H = HorizontalMagnetic Starter Standard on Single-Phase Units

Heavy-Duty Industrial Two-Stage Single-PhasePressure-Lubricated Stationary Units

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

353D80HC 5 942 17.7 17.2 80 545 70x23x47353D80VC 5 942 17.7 17.2 80 585 37x24x74353D120VC 5 942 17.7 17.2 120 658 40x30x75373D80HC 7.5 1034 23.8 22.6 80 565 70x23x47373D80VC 7.5 1034 23.8 22.6 80 585 37x24x74373D120VC 7.5 1034 23.8 22.6 120 678 40x30x75

Note: V = Vertical H = HorizontalOptional Magnetic Starter Required on Three-Phase Units

Heavy-Duty Industrial Two-Stage Three-PhasePressure-Lubricated Stationary Units

•H

eavy-Duty Industrial Tw

o-Stage

Pressure-Lubricated U

nits

Model: G211K30HCD

1817

Model: 251CP80HCBModel: 251CP80VCB

cfm cfm Tank Ship.Model hp rpm @ 100 @ 175 Size Wt LxWxHNumber psig psig (gal) (lb) (in)

251CP80HCB 5 942 17.7 17.2 80 540 70x23x47251CP80VCB 5 942 17.7 17.2 80 580 37x24x74251CP120VCB 5 942 17.7 17.2 120 653 40x30x75351CP80HC 5 942 17.7 17.2 80 545 70x23x47351CP80VC 5 942 17.7 17.2 80 585 37x24x74351CP120VC 5 942 17.7 17.2 120 658 40x30x75

Note: V = Vertical H = Horizontal251 = Splash-Lubricated351 = Pressure-Lubricated

Heavy-Duty Industrial Two-Stage Units with Combination Pressure Switch/Starter

Heavy-Duty Industrial Two-StageUnits with Combination PressureSwitch/Starter

cfm cfm TankModel hp Engine rpm @ 100 @ 175 Size LxWxHNumber psig psig (gal) (in)

D205Y30HC 10 Yanmar 1050 19.7 18.5 30 42x21x40D207Y30HC 10 Yanmar 1050 24.7 23.4 30 42x21x40G211K30HCD 11 Kohler 1050 19.6 18.5 30 42x21x40G211H30HCB 11 Honda 1050 19.6 18.5 30 42x21x40G212K30HCD 13 Kohler 1050 24.7 23.4 30 42x21x40G218K60HCA 18 Kohler 680 40.0 37.4 60 53x26x46

Head unloaders and alternator standard on 18 hp Kohler unit, 6 gallon fuel tank shipped loose.

Heavy-Duty Engine Powered – Two-Stage Splash-Lubricated Units

cfm cfm TankModel hp Engine rpm @ 100 @ 175 Size LxWxHNumber psig psig (gal) (in)

G311K30HCD 11 Kohler 1050 19.6 18.5 30 42x21x40G312K30HCD 13 Kohler 1050 24.7 23.4 30 42x21x40

Pressure-Lubricated Units

Heavy-Duty Engine PoweredTwo-Stage Units• Two-Stage Cast-Iron Compressor• Splash or Pressure Lubrication• Kohler and Honda Gasoline Engines

with Electric Start • Yanmar 10 hp

Diesel Engine• 30-Gallon ASME

Tank Standard on10 hp - 13 hp

• 60-Gallon ASME Tank Standard on 18 hp

• Oil Sight Glass• 175 psig Maximum Working (cut-out) Pressure• Low Oil Sentry (On Gasoline Engines)• ASME Coded Relief Valve in the Interstage,

Discharge Line and Tank• High Efficiency Intercoolers• Battery and Cable not Included• One-Year Warranty Standard

Optional Equipment• Head Unloaders• Two-Year Warranty Kit

•H

eavy-Duty Industrial Tw

o-Stage U

nits with C

ombination

Pressure Sw

itch/Starter

•H

eavy-Duty Engine Pow

ered Two-S

tage Units

This unit comes standard with a combination pressure

switch/starter. The contacts for the starter are combined

into the same unit as the pressure switch. This unit

is available with a 5 hp, 230 volt, single-phase motor

only. The unit has the same features as the heavy-duty

industrial two-stage units with the exception of the

combination switch.

Optional Equipment

• Filter/Silencer

• Air-cooled Aftercooler

• Pneumatic Tank Drain

• Electronic Tank Drain

• Two-Year Warranty Kit

2019

Model: 253D80DC

Heavy-Duty Industrial Two-StageDuplex Units• Two – Two-Stage Basic Compressors on One Tank• Two Motors with a Total Horsepower Range of 10 to 60 hp• Splash Lubrication• Heavy-Duty 1725 rpm Industrial Motors• Three-Phase Motors from 5 to 30 hp 200/208, 230 or 460 Volt• Horizontal ASME Coded Tanks• ASME Coded Relief Valve in the Interstage, Discharge

Line and Tank• 175 Maximum Working

(cut-out) Pressure• Oil Sight Glass• Optional Alternating

Control Panel Required• 100% Duty Cycle at

Specified Pressures• One-Year Warranty Standard,

Two-Year Warranty Optional

Optional Features:• Pressure Lubricated• Filter/Silencer• Alternating Duplex Control Panel• Dual Controls• Low Oil Level Switch• Air-cooled Aftercooler• Vibration Isolators• Pneumatic Tank Drain• Electronic Tank Drain• Optional Tank Sizes• Two-Year Warranty Kits• Single-Phase Motors (5 to 10 hp)

cfm cfm Tank @ 100 @ 175 Ship.

Model hp Size rpm psig psig Wt. LxWxHNumber (x2) (gal) (x2) (x2) (lb) (in)

253D80DC 5 80 H 942 - 17.2 925 69x24x46273D120DC 7.5 120 H 1034 - 22.6 1078 78x28x552103D200DC 10 200 H 968 - 35.0 1600 106x30x642153D200DC 15 200 H 950 - 52.5 1900 106x30x642203D200DC 20 200 H 680 - 78.4 3307 106x30x642253D200DC 25 200 H 830 - 95.6 3540 106x30x642303D200DC 30 200 H 940 - 108.3 3630 106x30x64

Heavy-Duty Industrial Two-Stage Three-Phase Splash-Lubricated Duplex Units

CCAS Model cfm @ TankNumber hp 175 psig Volt Size (gal)

25180HATP23 5 17.2 230 8027180HATP23 7.5 22.4 230 802101120HATP23 10 35.0 230 1202101200HATP23 10 35.0 230 200

Three-Phase25380HATP20 5 17.2 208 8025380HATP23 5 17.2 230 8025380HATP46 5 17.2 460 8027380HATP20 7.5 22.6 208 8027380HATP23 7.5 22.6 230 8027380HATP46 7.5 22.6 460 80273120HATP20 7.5 22.6 208 120273120HATP23 7.5 22.6 230 120273120HATP46 7.5 22.6 460 1202103120HATP20 10 35.0 208 1202103120HATP23 10 35.0 230 1202103120HATP46 10 35.0 460 1202103200HATP20 10 35.0 208 2002103200HATP23 10 35.0 230 2002103200HATP46 10 35.0 460 2002153120HATP20 15 52.5 208 1202153120HATP23 15 52.5 230 1202153120HATP46 15 52.5 460 1202153200HATP20 15 52.5 208 2002153200HATP23 15 52.5 230 2002153200HATP46 15 52.5 460 200

Complete Compressed Air Systems

Single-Phase

Complete Compressed Air System Units (CCAS)Standard features include a magnetic starter, after-cooler, moisture separator and trap, filter/silencer,pneumatic tank drain, refrigerated air dryer, particulate filter and coalescing filter mounted on the unit. The vibration isolators and the environmentally friendly oil and water separator areshipped loose with the unit. The unit has a two-yearwarranty standard on the basic compressor.

Model: 2153120HATP46

•H

eavy-Duty Industrial Tw

o-Stage D

uplex Units

•C

omplete C

ompressed A

ir System

Units

2221

Model: QT-5

Standard Features on Quincy Air Master SeriesReciprocating Compressors• Heavy-Duty Cast-Iron Crankcase,

Cylinders and Flywheel

• Two-Piece Connecting Rod

• Deep-Finned Cylinders

• High-Efficiency Intercoolers (Two-Stage)

• Replaceable Stainless Steel Reed Valves

• Non-Asbestos Gaskets

• Three-Piece Rings

• Less than 5 ppm Oil Carryover

• Industrial-Class Bearings

• Ductile-Iron Counter-Weighted Double-Throw

Crankshaft (Two-Stage)

• Oil Sight Glass (5 to 10 hp Two-Stage)

• 175 psig Maximum Working (cut-out) Pressure (Two-Stage)

• 125 psig Maximum Working (cut-out) Pressure (Single-Stage)

• Extra Capacity Oil Reservoir

• ASME-code Interstage Relief Valve (Two-stage)

Optional Equipment

• Filter/Silencers (standard on single-stage)

• Intake Unloaders

• Optional Flywheel Sizes

Model Bore Stroke Min/Max Ship.Number hp Lubrication LP(in) Cylinders (in) (rpm) Wt. (lb)

QTS-3 1.5-5 Splash 2.75 2 2 600-1030 50QTS-5 3-5 Splash 2.75 4 2 600-1030 150

Basic Compressors – Single-Stage

Model Bore Stroke Min/Max Ship.Number hp Lubrication LP(in) HP(in) (in) (rpm) Wt. (lb)

QT-5 3-5 Splash 4.00 2.25 3 400-1050 140QT-7.5 5-7.5 Splash 4.50 2.50 3 540-1060 150PLT-5 3-5 Pressure 4.00 2.25 2 400-1050 150PLT-7.5 5-7 Pressure 4.50 2.50 3 540-1060 140QT-10 10 Splash 5.00 2.75 3 400-968 220QT-15 10-15 Splash 4.50 2.50 3 400-1150 365QT-25 20-30 Splash 6.00 3.25 4 400-940 625

Basic Compressors – Two-Stage

Model: QTS-3

•S

tandard Features on Q

uincy Air M

aster Series

Reciprocating C

ompressors

2423

Magnetic StarterProvides thermal overload

protection for the motor.

A starter is required on all of

the two-stage units, with the

exception of the 5 hp units

with the capacitor start motors.

Low Oil Level SwitchThe Low Oil Level Switch provides protection

to the compressor by disengaging the starter/

contactor and shutting the motor off. (oil level

still requires monitoring) LOL switches are

installed at the factory 15 hp and up.

Air Treatment Packages (ATP)Quincy Air Treatment Packages have been sized to

match your compressed air system. The Quincy ATP

Package includes a particulate filter, a refrigerated

air dryer, and a coalescing filter.

Standard A.T.P. Capacity cfm NPT ConnectionPart Number @ 100 psig (Inches)

ATP020-SA 20 3/8"ATP030-SA 30 1/2"ATP040-SA 40 1/2"ATP050-SA 50 3/4"ATP060-SA 60 3/4"ATP070-SA 70 1"ATP085-SA 85 1"ATP100-SA 100 1"ATP125-SA 125 1"

Model: ATP020-5A

Air Treatment Packages

•A

ir Treatment P

ackages (ATP

)

•A

ccessories

AftercoolersThey are one of the most effective means of

reducing the discharge temperature and removing

moisture from your compressor. An aftercooler

must be installed to lower the inlet temperature

to the refrigerated dryer. The dryer is typically

rated at 100˚F maximum inlet temperature. The

aftercooler will lower the temperature to within

15˚F of the ambient conditions. Aftercoolers are

installed at the factory.

25

Pneumatic Tank DrainRecommended for all Stationary Units

Quin-Cip® LubricantRecommended for all Quincy Air M

compressors. Reduces carbon buil

in the valves and extends the life o

compressor. Available in 8 oz., one

and one-gallon containers. Availab

3 different SAE weights

ISO-32 / SAE-10W (cold weather)

ISO-68 / SAW-20W (warm weather

ISO100 / SAE-30W (hot weather)

Think of your compressor as an inve

we do. That’s why we developed Q

to ensure the efficiency and perfor

your investment. Quin-Cip protect

high temperatures and frictional w

bearings and cylinders that can dra

reduce the life of your compressor

Electronic Tank DrainRecommended for all Stationary Units

with 120 Volt Service

Zero-Loss Tank DrainEnergy efficient design drains

condensation automatically

without loss of compressed air.

Vibration Isolator PadRecommended for Horizontal

Stationary Units

Two-Stage FilterStandard filter on all two-stage units

Filter/SilencerOptional Filter for two-stage units

(standard on CCAS units)

•A

•Q

26

aster

d up

f the

-quart,

le in

)

stment –

uin-Cip

mance of

s against

ear of

matically

.

ccessories

uin-Cip Lubricant

LubricationSingle-Stage and Two-Stage Splash: Connecting rod

dippers splash oil onto the components requiring lubrication.

Two-Stage Pressure: Positive displacement Gerotor oil

pump and the connecting rod dippers provide 100% lubri-

cation to the bearings and components requiring lubrication.

Warranty Quincy Air Master units come

standard with a one-year

warranty. (See owner’s manual

for details). The single-stage

QTS basic compressors

(pumps) come standard with a two-year warranty. The

two-stage units have an optional two-year warranty on

the basic compressor (pump). A two-year warranty kit must

be purchased within 30 days from date of purchase of the

compressor. The warranty kit includes Quin-Cip lubricant

and filters to maintain the compressor for two years.

The CCAS units come standard with a two-year warranty.

The two-year warranty kit is shipped with the unit.

All performance data meets CAGI/PNEUROP PN2CPTC2 andPN2CPTC3 acceptance tests for electricity and I.C. engine-drivenpackaged displacement air compressors.

Proper filtration must be used for breathing air applications tomeet OSHA29CFR1910.134

We reserve the right to change specifications without liability,without advance notice, and without incurring obligation for prod-ucts previously or subsequently sold.

For more information about Quincy’s Air Master SeriesCall: 217.277.0270E-mail: airmaster@quincycompressor.comDiscover: www.quincyairmaster.com

©2002 Quincy Air Master; Quincy CompressorAll rights reserved. Litho in U.S.A. (AMSP-001 02/02)

Quincy Compressor®

Air Master® SeriesT R U E B L U E R E L I A B I L I T Y