QuickTest 100 ADSL2+ Tester

QuickTest 100 A cost effective, feature rich, yet simple to use ADSL2+ Tester

Key FeaturesFast and Simple ADSL2+ Installation and Maintenance Tester Simple Pass / Fail Front Panel LEDsComprehensive yet simple Web Interface for TroubleshootingRapid Switch On and TestAutomatic QuickTest Script at start upSupervisor Pass / Fail ThresholdsUp to eight Service Connection TestsIP Layer Tests - PING, FTP, HTTP and DNS

Simplicity LEDs to indicate to indicate service issues from Line Voltage through to High Layer HTTP tests.Supports ADSL, ADSL2, ADSL2+Supports PPPoA, PPPoE, IPoA,

MERSimple and Rapid testing at the

MDF, Cabinet and Customer Premise

Two Product Versions

ADSL2+ Service Measurement Version

High Layer Test Version

Front Panel Service Connection LEDs( Common to both product versions)

Indicates problems with PPP login and obtaining an IP address

Indicates problems with ADSL2+ Layer. Such as poor rate, excessive errors.Indicates problems with

missing Line voltage or incorrect polarity.

Front Panel ADSL2+ Service Measurement LEDs

Identifies if there is a poor Line Rate. This can be due to wrong DSLAM configuration, poor wiring or excessive line attenuation.

Identifies if there is a poor Noise Margin. This may be due to excessive line attenuation, poor connections, or adjacent cables/equipment causing interference

Identifies if there is excessive Line Attenuation. Check for poor connections. Check that the line length is not to far from the exchange.

ADSL Service Measurements

Line Rate Dedicated Front Panel LED to indicate if either Upstream or

Downstream Line rate below required threshold

Noise Margin Dedicated Front Panel LED to indicate if either Upstream or

Downstream Noise Margin below required threshold

Line Attenuation Dedicated Front Panel LED to indicate if either Upstream or

Downstream Line Attenuation below required threshold

Front Panel High Layer Service Test LEDs

Indicates Problems such as poor data rate.

Indicates problems such as unable to reach the default gateway, DNS server or specified endpoint.

Indicates problems with HTTP Test such as unable to reach server, poor performance

High Layer Service Tests

IP Ping Test Dedicated Front Panel LED Tests to the Default Gateway, DNS Servers, the Specified end point Identifies problems with incorrect IP Address assignment Identifies problems with invalid default gateway or DNS servers

HTTP Test Dedicated Front Panel LED Identifies problems with accessing the target HTTP Server Identifies problems with poor download rates

FTP Test Dedicated Front Panel LED Identifies problems with accessing the target FTP Server Identifies problems with poor download rates

Web Interface

Designed to target Installation and Maintenance Test NeedsComprehensive but simple to use Test Suite makes the QuickTest 100 a capable Field Tester.

Retains simple Pass / Fail Concept as on the product Front Panel

Web Interface

When a fault is identified the failing parameter is also highlighted in Red.

Web Interface

Test Status Provided

Web Interface

Web Interface

All Backed up with Comprehensive Statistics

Runs at start upActivates DSL,

ATM, PPP and IP layers.

DNS TestPing TestFTP TestHTTP TestIncluded in both product versions

Quick Test Script

Supervisor and Operator Modes

Supervisor is able to Create, Save and Copy Service Profiles

Supervisor is able to Modify all Setup ParametersSupervisor is able to Configure Pass / Fail Thresholds for each TestOperator Mode is locked down and has no access to

the above optionsAdditional Modes such as Field Technician can be

supported

Supervisor Screen

Setup Menu

Extended Admin Options

Operator Screen

No Setup Menu

Reduced Admin Menu

Configurable Pass / Fail Thresholds

For each Test the supervisor can set Pass / Fail thresholds - or simply use the factory supplied values.

Helps to define what is an acceptable test result.For example, with an 8Mbit service if we obtain a trained rate of only 512k we will want to indicate this as a failure

Service Connection

Tests•Up to eight Service

Connections are supported.

•Suited to Testing a single Data Connection

•Ready To Test your Multi Service Connections such as IPTV.

QuickTest 100 ADSL2+ TesterThe cost effective, feature rich, simple to use ADSL2+ Tester